R3 to Mail-PDF and Mail-PDF to R3
Hi sdners!
I have a doubt. well.. 2 really
1- I have to send some data from R/3 to a supplier by mail, with a pdf document attached to it. Is it possible to convert IDoc data to pdf format, and send it throw mail (attached to it) to a recipient determined by the IDoc data?
I think a solution would be to create a XSL Mapping to create PDF and send it throw mail (like Prakash's blog /people/community.user/blog/2006/09/07/email-reporting ), but I never did this.
2- And I have to do the response too, asynchronous. I have to receive the mail, with a pdf attached to it, and use the pdf data to send an IDoc to R/3.
Is it possible to use PayloadSwapBean module to use pdf attached file (like Michal's blog /people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step) , and then use a module to parse the PDF file and frame a XML document (like blog /people/sap.user72/blog/2005/07/31/xi-read-data-from-pdf-file-in-sender-adapter) ??
Are these interfaces possible?
I will reaaally apreciate your help
Regards,
Fede
You can't do that. Couldn't you just export the data from the PDF after it's received?
In order to attach the complete PDF with Reader, the document has to be Reader-enabled.
Similar Messages
-
Converting report to PDF and mailing
Hi every one,
I've gone through various threads and i'm aware of the Functional module's used to
convert the report to pdf and mail it back.Like CONVERT_OTFSPOOLJOB_2_PDF, CONVERT_OTF_2_PDF and for mailing we have SEND_NEW_DOCUMENT_ATT_SEND_API1.
I've worked with this but my problem is i'm not able to convet the report output to pdf.When i'm doing this i'm getting the output of my functional module converted to pdf like the number of header and item records available for the given data in the selection screen.
Since all the threads i've gone through is converting the single internal table which has the output to pdf.
But i've got the REUSE_ALV_HIERSQL_LIST_DISPLAY, hierarchial report which as known has got two internal tables.How to the same to this kind of report....More over is it possible to convert report to pdf in online without transfering it to spool and getting the spool id to convert it to pdf.........
Any help or suggestions will surely be rewarded......
Thanks in Advance.....Here is the complete code for you;
It Converts spool request into PDF document and emails it.
<b>http://www.sapdevelopment.co.uk/reporting/rep_spooltopdf.htm</b>
Regards,
Vishal -
Convert Spool to PDF and mail for the jobs not run in background.
Dear All,
I need to convert the spool job into pdf and mail as attachment for job not run in background.
I am printing the bills using the program SD70AV3A to print the bills in a batch using the SUBMIT.
But i am not using the spool options since its going to into waiting state in spool...and i need to change the printer properties to G
to get the printer to print the reports as these jobs run in backgroud....but this solution is not acceptable solution.
SUBMIT SD70AV3A
WITH RG_KSCHL-LOW = 'ZRR'
WITH RG_NACHA-LOW = '1'
WITH PM_VERMO = '2'
WITH PM_NSORT = '1'
WITH RG_VBELN IN range.
* TO SAP-SPOOL
* SPOOL PARAMETERS print_parameters
* WITHOUT SPOOL DYNPRO
* VIA JOB name NUMBER number
* AND RETURN.
so how do i get the spool number from the above after the job is submitted....and then convert into pdf and mail
please suggest some solution. I have searched on net but most the solutions are say to run the job as background job...
i have also looked into the program RSTXPDFT4 but it asks for the spool id ....how can i get spool id for the job that has been completed.
please suggest some solution.
Thanks
Bhargava.Hi,
Spool to PDF : FM 'CONVERT_ABAPSOOLJOB_2_PDF'
Table TSP01 to get spool number
You ,may need to convert OTF to PDF: FM CONVERT_OTF
and the to binary : FM 'SMCS_XSTRING_TO_BINARY'
To send mail use class: cl_document _bcs.
Regards,
Maria João Rocha -
hi friends,
i want convert the alv report to pdf and mail the same pdf.
have used function REUSE_ALV_LIST_DISPLAY to display alv report.
i am using CONVERT_ABAPSPOOLJOB_2_PDF to convert the alv report to pdf.
now i need to mail the pdf implicitly to the email address.
i have used some function to mail the pdf but it is asking for the path which has to be hard coded.
the path cannot be hard coded.
cant use F4_GETFILENAME or gui_upload to attach the file or to get the path because the pdf has to be sent directly to some email address.
thanks.
regards,
akshay ruia.Please refer the link below.............
Sample Program To Convert Smartform To PDF Document & Mail It To The Concerned As An Attachment.
[http://www.abapmadeeasy.com/2011/02/sap-abap-sample-program-to-convert.html|http://www.abapmadeeasy.com/2011/02/sap-abap-sample-program-to-convert.html]
Regards,
Uttam Agrawal
http://www.abapmadeeasy.com
Edited by: uttamagrawal on Feb 22, 2011 9:19 AM -
Regarding PDF and mail attachement at SMARTFORMS
hey jeyanthi,
I tried the program from the link you gave to convert otf to pdf and sending pdf file as attachement.
Everything works fine till PDF creation.
but i did not get mail sending function works.
while debugging i come to know that FM
is goint to execption error
'OTHERS 8'.
why is it...its not working..could you pls guide me here..
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = w_doc_chng
put_in_outbox = 'X'
TABLES
packing_list = i_objpack
object_header = w_objhead
contents_hex = i_objbin
contents_txt = i_objtxt
receivers = i_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ambichan.hey jayanthi,
Thanks for your reply.
I am sorry, I debugged the code from starting again.
I can see all the table fields except w_objhead gets populating values and passing to FM.
everything is fine, even sy-subrc is 0 in this case now.
and execution Ends normally without displaying any dialog or popup.
but i could not see the Mail received to the mail id. could the FM be problem? I am working in 4.6C.
could u pls look at my code.
REPORT ZZZ_TEST2_PRG .
DATA :i_tline TYPE TABLE OF tline WITH HEADER LINE,
i_receivers TYPE TABLE OF somlreci1 WITH HEADER LINE,
i_record LIKE solisti1 OCCURS 0 WITH HEADER LINE,
*Objects to send mail.
i_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
i_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
i_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
i_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
*Work Area declarations
w_objhead TYPE soli_tab,
w_ctrlop TYPE ssfctrlop,
w_compop TYPE ssfcompop,
w_return TYPE ssfcrescl,
w_doc_chng TYPE sodocchgi1,
w_data TYPE sodocchgi1,
w_buffer TYPE string,
*Variables declarations
v_form_name TYPE rs38l_fnam,
v_len_in LIKE sood-objlen,
v_len_out LIKE sood-objlen,
v_len_outn TYPE i,
v_lines_txt TYPE i,
v_lines_bin TYPE i.
parameter: p_form type tdsfname default 'ZZZ_TEST2'.
DATA:i_otf TYPE itcoo occurs 0 with HEADER LINE.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = p_form
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = v_form_name
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
w_ctrlop-getotf = 'X'.
w_ctrlop-no_dialog = 'X'.
w_ctrlop-preview = 'X'.
w_compop-tdnoprev = 'X'.
CALL FUNCTION v_form_name
EXPORTING
control_parameters = w_ctrlop
output_options = w_compop
user_settings = 'X'
IMPORTING
job_output_info = w_return
EXCEPTIONS
formatting_error = 1
internal_error =2
send_error = 3
user_canceled = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
i_otf[] = w_return-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 132
ARCHIVE_INDEX = ' '
IMPORTING
BIN_FILESIZE = v_len_in
TABLES
OTF = i_otf
LINES = i_tline
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
OTHERS = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Convert PDF from 132 to 255.
LOOP AT i_tline.
*Replacing space by ~
TRANSLATE i_tline USING '~'.
CONCATENATE w_buffer i_tline INTO w_buffer.
ENDLOOP.
*Replacing ~ by space
TRANSLATE w_buffer USING '~'.
DO.
i_record = w_buffer.
APPENDing 255 Characters as a record
APPEND i_record.
SHIFT w_buffer LEFT BY 255 PLACES.
IF w_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
Refresh: i_reclist,i_objtxt,i_objbin,i_objpack.
clear w_objhead.
*Object with PDF.
i_objbin[] = i_record[].
DESCRIBE TABLE i_objbin LINES v_lines_bin.
Object with main text of the mail.
i_objtxt = 'Find attached the output of the smart form.'.
APPEND i_objtxt.
i_objtxt = 'Regards,'.
APPEND i_objtxt.
i_objtxt = 'chandra'.
APPEND i_objtxt.
DESCRIBE TABLE i_objtxt LINES v_lines_txt.
Document information.
w_doc_chng-obj_name = 'Smartform'.
w_doc_chng-expiry_dat = sy-datum + 10.
w_doc_chng-obj_descr = 'Smart form output'.
w_doc_chng-sensitivty = 'F'. "Functional object
w_doc_chng-doc_size = v_lines_txt * 255.
Pack to main body as RAW.
Obj. to be transported not in binary form
CLEAR i_objpack-transf_bin.
Start line of object header in transport packet
i_objpack-head_start = 1.
Number of lines of an object header in object packet
i_objpack-head_num = 0.
Start line of object contents in an object packet
i_objpack-body_start = 1.
Number of lines of the object contents in an object packet
i_objpack-body_num = v_lines_txt.
Code for document class
i_objpack-doc_type = 'RAW'.
APPEND i_objpack.
Packing as PDF.
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 1.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'Smartform'.
CONCATENATE 'Smartform_output' '.pdf'
INTO i_objpack-obj_descr.
i_objpack-doc_size = v_lines_bin * 255.
APPEND i_objpack.
Document information.
CLEAR i_reclist.
e-mail receivers.
i_reclist-receiver = '[email protected]'.
i_reclist-express = 'X'.
i_reclist-rec_type = 'U'. "Internet address
APPEND i_reclist.
Sending mail.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = w_doc_chng
put_in_outbox = 'X'
TABLES
packing_list = i_objpack
object_header = w_objhead
contents_hex = i_objbin
contents_txt = i_objtxt
receivers = i_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ambichan.
Message was edited by: ambi chan -
Save as PDF and Save PDF as PostScript options in the Printer dialog are not supported.
I downloaded Indesign CS3 trial and liked everything about it until I attempted to print to postscript and got that message. Nothing I have tried has helped. I have seen in various forums that others are having the same problem, but haven't found any solution offered. I am running Tiger 10.4.10 on a new Intel Imac with 3G ram. This is a procedure I use very often in my workflow, and have never had this problem with CS2 on my PC or other Macs. Is there a solution? I downloaded the .1 update and installed that and it didn't change anything.
PLEASE SOMEONE HELP ME.
Its the first time Im using print booklet option to save my file. I have the same problem when trying to save as pdf and get the
"The Save as PDF and Save PDF as PostScript options in the Printer dialog are not supported."
I'm trying to save a .pdf of a booklet of a facing pages document of A4 size each facing page for a whole size A3, then hope to let the pages be correctly arranged by inDesing, then print and staple.
Meaning pages will be like this - Page #60 left side [of the A3] - page #1 right side [of the A3] , page # 2 right side[of the A3] - page #59 left side[of the A3] etc...
I CANT DO IT. I tried to follow Melvin Thompson , but when I choose save .ps and open it in preview all I see is independent a4 pages and just the left ones , .. How can I save my file as .pdf ready to be printed in a3 ?
I really appreciate any help. -
I have Adobe Reader XI with the package that allows me to send pdfs and convert pdfs to Word. When I open a pdf and try to search the search shows no matches even though the word I am searching for is in the document. Any suggestions how to search?
Once again, my thanks for your assistance. If I may impose on your generosity one more time, if I understand you correctly if I create a document on Word or WordPerfect, print it and scan it to create a pdf, the search function will not work. But, if I create the pdf document in Word the search function will work. Unfortunately, I am not sure how I create a pdf document in Word other than by printing it and scanning it. Could you please explain.
William B. Kohn, Esq.
General Counsel
Paul V. Profeta & Associates, Inc.
769 Northfield Avenue
Suite 250
West Orange, New Jersey 07052
(973) 325 - 1300
(973) 325 - 0376 (Facsimile)
[email protected]<mailto:[email protected]> -
Settings of Mail Host and Mail Port in transaction: SCOT for the node: SMTP
Hi,
Could anyone please explain me the significance of Mail Host and Mail Port for the SMTP node in transaction: SCOT.
It says Mail Server to which outbound mails can be passed.
Can i specify my GMAIL ID in the field Mail Host and left blank the Mail Port so that the mail can be sent to my GMAIL Account.
Please let me know if further details are required from my side.
Thanks & Regards,
Goutham.the below are the step to configure your mail server of anhy type ....
Steps to perform in SAP:
1. Transaction SM59 Setup an RFC Destination for the execution of the email transfer
a. Name: Internet Mail Gateway
b. Connection Type: T
c. Description: Internet Mail Gateway
d. Activation Type: Start
e. Explicit host:
i. Program: c:<dir>mlunxsnd (I used c:sapmail)
ii. Target Host: <Server_Name>
f. (MENU) Destination -> Gateway Options
i. Gateway Host: < Server_Name>
ii. Gateway Service: sapgw00
iii.<OK>
g. SAVE
2. Transaction SCOT Setup a default domain for your system
a. (MENU) Settings -> Default Domain
i. <Default_domain> (i.e. [email protected], Domain company.com)
ii. This setting gives a default to any user who does not have their email address maintained in the system. <user_name>@<default_domain>
3. Transaction SCOT Setup of the Node for queuing the emails before transfer to Exchange
a. Click on INT -> Create button
b. Give Default name (I choose EXCHG, as this was the node type for the Exchange Connector)
c. Give Description
d. Assign the RFC Destination previously created (Internet Mail Gateway)
e. Node: Internet
f. Address area: *
g. Supported address Types:
i. All formats except the fllw
ii. ALI, OBJ, OTF, SCR, URL
h. Choose Ok and Save
4. Transaction SCOT Setup a job to execute the send process on the queue.
a. (MENU) View -> Jobs
i. Select the Create Button
ii. Job Name: SAPConnect
iii. Put Cursor on Variant: SAP&CONNECTINT *As you created an INT Node, you need to run the variant for all of the INT sending. You can select SAP&CONNECTALL, but if you are not using any other node types, you can run with SAP&CONNECTINT.
iv. Select: Schedule Job Button
v. Schedule job for a periodic run approx. every 15 minutes
vi. Save
5. Transaction SU01 Maintain each users email address
a. Select users who require the ability to email from SAP
b. Under the address tab, in SU01, maintain their email address.
Steps to perform on the SAP system (operating System):
1. Create a directory for the SAP programs.
a. Create directory c:sapmail (Directory can be anything)
b. Unpack the ML*.CAR file from SAPs website
c. Alternatively, copy the ML* files from /usr/sap/../run/ directory. This ensures version compatibility with your SAP instance.
2. Create the directories for your sendmail program
a. http://emailrelay.sourceforge.net/
i. Download the emailrelay program
b. Create directory c:winntspoolemailrelay
i. Unpack the contents of the emailrelay zip into this directory
c. create Directory c:reskit (Used to make the emailrelay program run as a service
i. http://www.tacktech.com/display.cfm?ttid=197
1. www.tacktech.com had some great instructions for creating a service on the NT side. (Thank you Tacktech)
2. Use SRVANY to create the services, as documented below.
d. Open command prompt
e. Follow instructions for creating a service
i. cd reskit
ii. execute c:reskitinstsrv.exe "<SERVICE_NAME_Engine>" c:reskitsrvany.exe
1. This service is the engine
iii. execute c:reskitinstsrv.exe "<SERVICE_NAME_Send_Process>" c:reskitsrvany.exe
1. This service is the send process
iv. Modify the registry to represent the two new services
v. View instructions for Parameters and Application Creation under the services in the registry
vi. Command lines should be as follows:
1. <SERVICE_NAME_Engine> - c:winntspoolemailrelayemailrelay.exe --as-server --no-daemon
2. <SERVICE_NAME_Send_Process> - c:winntspoolemailrelayemailrelay.exe --no-daemon -hidden --forward-to (your_mailhost):SMTP --poll 5
vii. Start the services using service mgr.
f. cmd prompt cd sapmail
g. mlsomadm c:sapmailmailgw.ini (see below)
3. Create a mailgw.ini file (This file is used by the mlunxsnd program)
a. Open a command prompt
b. Change to the directory c:sapmail
c. Run command mlsomadm c:sapmailmailgw.ini
i. This creates the parameter file for the send process.
d. MAILGW.INI entries
i. System Name: [SID]
ii. Client: [000]
iii. Username: [MAILADM] no user required, as this is not being used for your connection
iv. Password: [*******] leave empty
v. Language: [E]
vi. Load Balancing: [N]
vii. Hostname: [app_server_name]
viii. System Number: [00]
ix. Gateway Hostname: [ ] you do not have to specify, it will use the default
x. Gateway Service: [ ] default will be used
xi. Use SAP Router: [N]
xii. Set Bcc Flag on Env..: [N]
xiii. Trace Level <In..>: 1
xiv. Trace file <In..> c:sapmailtracein.txt - Can be where ever you want
xv. Sendmail Command: c:winntspoolemailrelaysubmit -from <SENDER_ADDRESS>
xvi. A warning may come up that says to not use the t flag. IGNORE
xvii. Codepage: [ISO-8859-1]
xviii. Generate Notificat..: [N]
xix. Trace Level <Out..: [1]
xx. Trace File <Out..>: c:sapmailtraceout.txt - Can be where ever you want
xxi. Update File c:sapmailmailgw.ini [Y]
Steps to perform on the Microsoft Exchange System
1. Allow the SAP systems to enter on port 25 to send mails using Microsoft Exchange (SMTP Communication)
reward points ....
Girish -
No User Library? Where is the Mail.plist and Mail stored?
I have installed Lion on an external USB 2.0 HD and want to copy over my Mail folder and mail.plist from my iMac's internal HD.
I've copied them but don't know where to put them as there appears to be no User Library folder?We never found out why they hid the user library but not the main library.
I can't remember helping anybody fix anything that they accidentally removed from the Library, but I sure told a lot of people how to fix stuff by digging into the Library. -
Mail messing up 'mail headings' and 'mail messages'
Hi,
I have a question regarding Apple Mail 3.6 that until recently has operated flawlessly, being linked to three different mail account - among them my work account via IMAP.
Yet, a couple of days ago the program started to confuse 'mail headings' and 'mail messages'. All of a sudden I got new messages that contained up to three year old messages. What do I do about that?
The problem seems to reside in the program itself. If I my work account via webmail, there are no problems at all. Similarly, 'headings' and 'messages' match perfectly on my iPhone.
Any suggestions are most welcome.
Thanks on beforehand!
Best,
MikaelHello and welcome to the Discussions.
The index probably needs to be repaired. You may need to force a reindexing. Try removing the Envelope Index to force reindexing of all mailboxes -- see:
http://docs.info.apple.com/article.html?path=Mail/3.0/en/14019.html
With IMAP or Exchange accounts, note their special treatment requiring removal of the account folders. Have you ever removed the Envelope Index without removing the account folders, by any chance?
After you do this, you should again test.
Ernie -
Report output to convert to pdf and mail it to recepient
Hi
I'm using the below coding for converting the output of the program to pdf and then mail it to the recepient.The coding works for background processsing only can i do the same for online.In the write statement i'm using the sy-repid my program name and when i get the pdf mail i'm getting the name of the program but instead i need to get the output of my program.Can any one help me in correcting the coding to get the output in pdf format.I know where i'm going wrong but this is the first time i'm working with this so new to this....It would be better if i could run the program and get the convertions into pdf through mail instead of background processing.....Please change the coding below to get the same.....
DATA: gd_recsize TYPE i.
Spool IDs
TYPES: BEGIN OF t_tbtcp.
INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
wa_tbtcp TYPE t_tbtcp.
Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
gd_eventparm LIKE tbtcm-eventparm,
gd_external_program_active LIKE tbtcm-xpgactive,
gd_jobcount LIKE tbtcm-jobcount,
gd_jobname LIKE tbtcm-jobname,
gd_stepcount LIKE tbtcm-stepcount,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_sender_type LIKE soextreci1-adr_typ,
gd_attachment_desc TYPE so_obj_nam,
gd_attachment_name TYPE so_obj_des.
Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
gd_destination LIKE rlgrap-filename,
gd_bytecount LIKE tst01-dsize,
gd_buffer TYPE string.
Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
c_no(1) TYPE c VALUE ' ',
c_device(4) TYPE c VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
Write statement to represent report output. Spool request is created
if write statement is executed in background. This could also be an
ALV grid which would be converted to PDF without any extra effort
WRITE sy-repid.
new-page.
commit work.
new-page print off.
IF sy-batch EQ 'X'.
PERFORM get_job_details.
PERFORM obtain_spool_id.
Alternative way could be to submit another program and store spool
id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
to sap-spool
spool parameters %_print
archive parameters %_print
without spool dynpro
and return.
Get spool id from program called above
IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
PERFORM convert_spool_to_pdf.
PERFORM process_email.
if p_delspl EQ 'X'.
PERFORM delete_spool.
endif.
IF sy-sysid = c_dev.
wait up to 5 seconds.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDIF.
ELSE.
SKIP.
WRITE:/ 'Program must be executed in background in-order for spool'
'request to be created.'.
ENDIF.
FORM obtain_spool_id *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident <> '0000000000'
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
message s004(zdd) with gd_spool_nr.
gd_spool_nr = wa_tbtcp-listident.
MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
MESSAGE s005(zdd).
ENDIF.
ENDFORM.
FORM get_job_details *
FORM get_job_details.
Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
ENDFORM.
FORM convert_spool_to_pdf *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att = gd_buffer.
APPEND it_mess_att.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM.
FORM process_email *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
perform send_email using p_email2.
ENDFORM.
FORM send_email *
--> p_email *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
Default subject matter
gd_subject = 'Branch Revenue'.
gd_attachment_desc = 'Branch Revenue'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod = 'Branch Revenue,Profit and Commissions'.
APPEND it_mess_bod.
it_mess_bod = 'Message Body text, line 2...'.
APPEND it_mess_bod.
If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_mess_bod
it_mess_att
using p_email
'Branch Revenue'
'PDF'
gd_attachment_name
gd_attachment_desc
p_sender
gd_sender_type
changing gd_error
gd_reciever.
ENDFORM.
FORM delete_spool *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
spoolid = ld_spool_nr.
ENDFORM.
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM send_file_as_email_attachment tables it_message
it_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
Thanks in advance.....Hi
Below is the code I was used to convert the sap script( Sales Order) to convert to PDf and send as an attachment.
Dev/UDD Id : EUR-770416 *
Author : M.Sreeram Kumar *
Date : 08-Apr-07 *
Request : DU1K933766
Description: Send an order confirmation to the multiple user in a *
PDF format via Email. *
Change Log *
Author : *
Date : *
Description : *
Request : *
Print of an order confirmation by SAPscript
REPORT zrep_email LINE-COUNT 100 MESSAGE-ID vn.
TABLES: komk, "Communicationarea for conditions
komp, "Communicationarea for conditions
komvd, "Communicationarea for conditions
vbco3, "Communicationarea for view
vbdka, "Headerview
vbdpa, "Itemview
vbdpau, "Subitemnumbers
conf_out, "Configuration data
sadr, "Addresses
tvag, "Reason for rejection
vedka, "Servicecontract head data
vedpa, "Servicecontract position data
vedkn, "Servicecontract head notice data
vedpn, "Servicecontract pos. notice data
vbpa, "Sales Document: Partner
kna1, "General Data in Customer Master
riserls, "Serialnumbers
komser, "Serialnumbers for print
tvbur, "Sales office
tvko, "Sales organisation
adrs, "Communicationarea for Address
fpltdr. "billing schedules
INCLUDE zrep_rvadtabl.
*INCLUDE yzrvadtabl.
*INCLUDE RVADTABL.
INCLUDE zrep_rvdirekt.
*INCLUDE yzrvdirekt.
*INCLUDE RVDIREKT.
INCLUDE zrep_vedadata.
*INCLUDE yzvedadata.
*INCLUDE VEDADATA.
DATA: retcode LIKE sy-subrc. "Returncode
DATA: repeat(1) TYPE c.
DATA: xscreen(1) TYPE c. "Output on printer or screen
DATA: BEGIN OF steu, "Controldata for output
vdkex(1) TYPE c,
vdpex(1) TYPE c,
kbkex(1) TYPE c,
kbpex(1) TYPE c,
END OF steu.
DATA: BEGIN OF tvbdpa OCCURS 0. "Internal table for items
INCLUDE STRUCTURE vbdpa.
DATA: END OF tvbdpa.
DATA: BEGIN OF tkomv OCCURS 50.
INCLUDE STRUCTURE komv.
DATA: END OF tkomv.
DATA: BEGIN OF tkomvd OCCURS 50.
INCLUDE STRUCTURE komvd.
DATA: END OF tkomvd.
DATA: BEGIN OF tvbdpau OCCURS 5.
INCLUDE STRUCTURE vbdpau.
DATA: END OF tvbdpau.
DATA: BEGIN OF tkomcon OCCURS 50.
INCLUDE STRUCTURE conf_out.
DATA: END OF tkomcon.
DATA: BEGIN OF tkomservh OCCURS 1.
INCLUDE STRUCTURE vedka.
DATA: END OF tkomservh.
DATA: BEGIN OF tkomservp OCCURS 5.
INCLUDE STRUCTURE vedpa.
DATA: END OF tkomservp.
DATA: BEGIN OF tkomservhn OCCURS 5.
INCLUDE STRUCTURE vedkn.
DATA: END OF tkomservhn.
DATA: BEGIN OF tkomservpn OCCURS 5.
INCLUDE STRUCTURE vedpn.
DATA: END OF tkomservpn.
DATA: BEGIN OF tkomser OCCURS 5.
INCLUDE STRUCTURE riserls.
DATA: END OF tkomser.
DATA: BEGIN OF tkomser_print OCCURS 5.
INCLUDE STRUCTURE komser.
DATA: END OF tkomser_print.
DATA: BEGIN OF tfpltdr OCCURS 5.
INCLUDE STRUCTURE fpltdr.
DATA: END OF tfpltdr.
DATA: pr_kappl(01) TYPE c VALUE 'V'. "Application for pricing
DATA: BEGIN OF char_val OCCURS 0,
atnam LIKE cabn-atnam,
atwrt LIKE ausp-atwrt,
END OF char_val.
FORM entry USING return_code us_screen.
CLEAR retcode.
xscreen = us_screen.
PERFORM processing.
IF retcode NE 0.
return_code = 1.
ELSE.
return_code = 0.
ENDIF.
ENDFORM. "ENTRY
FORM PROCESSING *
FORM processing.
PERFORM get_data.
CHECK retcode = 0.
PERFORM form_open USING xscreen vbdka-land1.
CHECK retcode = 0.
PERFORM logo_selection.
PERFORM form_title_print.
CHECK retcode = 0.
PERFORM write_header_info.
PERFORM validity_print.
CHECK retcode = 0.
PERFORM header_data_print.
CHECK retcode = 0.
PERFORM header_serv_print.
CHECK retcode = 0.
PERFORM header_notice_print.
CHECK retcode = 0.
PERFORM header_inter_print.
CHECK retcode = 0.
PERFORM header_text_print.
CHECK retcode = 0.
PERFORM item_print.
CHECK retcode = 0.
PERFORM end_print.
CHECK retcode = 0.
PERFORM form_close.
CHECK retcode = 0.
PERFORM zemail_process.
ENDFORM. "PROCESSING
S U B R O U T I N E S *
FORM ALTERNATIVE_ITEM *
A text is printed, if the item is an alternative item. *
FORM alternative_item.
CHECK vbdpa-grpos CN '0'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ALTERNATIVE_ITEM'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "ALTERNATIVE_ITEM
FORM CHECK_REPEAT *
A text is printed, if it is a repeat print for the document. *
FORM check_repeat.
CLEAR repeat.
SELECT * INTO *nast FROM nast WHERE kappl = nast-kappl
AND objky = nast-objky
AND kschl = nast-kschl
AND spras = nast-spras
AND parnr = nast-parnr
AND parvw = nast-parvw
AND nacha BETWEEN '1' AND '4'.
CHECK *nast-vstat = '1'.
repeat = 'X'.
EXIT.
ENDSELECT.
ENDFORM. "CHECK_REPEAT
FORM DELIVERY_DATE *
If the delivery date in the item is different to the header *
date and there are no scheduled quantities, the delivery date *
is printed in the item block. *
FORM delivery_date.
IF vbdka-lfdat = space AND
vbdpa-lfdat NE space AND
vbdpa-etenr_da = space.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_DELIVERY_DATE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDFORM. "DELIVERY_DATE
FORM DIFFERENT_CONSIGNEE *
If the consignee in the item is different to the header con- *
signee, it is printed by this routine. *
FORM different_consignee.
CHECK vbdka-name1_we NE vbdpa-name1_we
OR vbdka-name2_we NE vbdpa-name2_we
OR vbdka-name3_we NE vbdpa-name3_we
OR vbdka-name4_we NE vbdpa-name4_we.
CHECK vbdpa-name1_we NE space
OR vbdpa-name2_we NE space
OR vbdpa-name3_we NE space
OR vbdpa-name4_we NE space.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_CONSIGNEE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "DIFFERENT_CONSIGNEE
FORM DIFFERENT_REFERENCE_NO *
If the reference number in the item is different to the header*
reference number, it is printed by this routine. *
FORM different_reference_no.
CHECK vbdpa-vbeln_vang NE vbdka-vbeln_vang
OR vbdpa-vbtyp_vang NE vbdka-vbtyp_vang.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_REFERENCE_NO'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "DIFFERENT_REFERENCE_NO
FORM DIFFERENT_TERMS *
If the terms in the item are different to the header terms, *
they are printed by this routine. *
FORM different_terms.
DATA: us_vposn LIKE vedpa-vposn.
DATA: us_text(1) TYPE c. "Flag for Noticetext was printed
IF vbdpa-zterm NE vbdka-zterm AND
vbdpa-zterm NE space.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_PAYMENT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
IF vbdpa-inco1 NE space.
IF vbdpa-inco1 NE vbdka-inco1 OR
vbdpa-inco2 NE vbdka-inco2.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_DELIVERY'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDIF.
Print different validity-data for the position
READ TABLE tkomservp WITH KEY vbdpa-posnr.
IF sy-subrc EQ 0.
vedpa = tkomservp.
IF vedpa-vbegdat NE space AND
vedpa-venddat NE space AND
NOT vedpa-vbegdat IS INITIAL AND
NOT vedpa-venddat IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_SERV1'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ELSEIF vedpa-vbegdat NE space AND
NOT vedpa-vbegdat IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_SERV2'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_SERV3'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDIF.
Notice-rules for the positions.
MOVE vbdpa-posnr TO us_vposn.
CLEAR us_text.
LOOP AT tkomservpn WHERE vposn = us_vposn.
vedpn = tkomservpn.
IF us_text IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_NOTTXT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
us_text = charx.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_TERMS_OF_NOTICE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDLOOP.
IF NOT us_text IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'EMPTY_LINE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDFORM. "DIFFERENT_TERMS
FORM END_PRINT *
FORM end_print.
PERFORM get_header_prices.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'PROTECT'.
PERFORM header_price_print.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'END_VALUES'.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'ENDPROTECT'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'SUPPLEMENT_TEXT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "END_PRINT
FORM FORM_CLOSE *
End of printing the form *
FORM form_close.
CALL FUNCTION 'CLOSE_FORM'
EXCEPTIONS
OTHERS = 1.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT =
RDI_RESULT =
TABLES
otfdata = t_otfdata
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SEND_ERROR = 3
SPOOL_ERROR = 4
CODEPAGE = 5
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF sy-subrc NE 0.
PERFORM protocol_update.
retcode = 1.
ENDIF.
SET COUNTRY space.
ENDFORM. "FORM_CLOSE
FORM FORM_OPEN *
Start of printing the form *
--> US_SCREEN Output on screen *
' ' = printer *
'X' = screen *
--> US_COUNTRY County for telecommunication and SET COUNTRY *
FORM form_open USING us_screen us_country.
INCLUDE zrep_rvadopfo.
INCLUDE yzrvadopfo.
INCLUDE RVADOPFO.
ENDFORM. "FORM_OPEN
FORM FORM_TITLE_PRINT *
Printing of the form title depending of the field VBTYP *
FORM form_title_print.
CASE vbdka-vbtyp.
WHEN 'A'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_A'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'B'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_B'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'C'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_C'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'E'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_E'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'F'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_F'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'G'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_F'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'H'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_H'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'K'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_K'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN 'L'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_L'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
WHEN OTHERS.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TITLE_OTHERS'
window = 'TITLE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDCASE.
IF repeat NE space.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'REPEAT'
window = 'REPEAT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDFORM. "FORM_TITLE_PRINT
FORM GET_DATA *
General provision of data for the form *
FORM get_data.
DATA: us_veda_vbeln LIKE veda-vbeln.
DATA: us_veda_posnr_low LIKE veda-vposn.
CALL FUNCTION 'RV_PRICE_PRINT_REFRESH'
TABLES
tkomv = tkomv.
CLEAR komk.
CLEAR komp.
vbco3-mandt = sy-mandt.
vbco3-spras = nast-spras.
vbco3-vbeln = nast-objky.
vbco3-kunde = nast-parnr.
vbco3-parvw = nast-parvw.
CALL FUNCTION 'RV_DOCUMENT_PRINT_VIEW'
EXPORTING
comwa = vbco3
IMPORTING
kopf = vbdka
TABLES
pos = tvbdpa.
Fetch servicecontract-data and notice-data for head and position.
us_veda_vbeln = vbdka-vbeln.
us_veda_posnr_low = posnr_low.
CALL FUNCTION 'SD_VEDA_GET_PRINT_DATA'
EXPORTING
i_document_number = us_veda_vbeln
i_language = sy-langu
i_posnr_low = us_veda_posnr_low
TABLES
print_data_pos = tkomservp
print_data_head = tkomservh
print_notice_pos = tkomservpn
print_notice_head = tkomservhn.
PERFORM get_controll_data.
PERFORM sender.
PERFORM check_repeat.
PERFORM tvbdpau_create.
ENDFORM. "GET_DATA
FORM GET_ITEM_BILLING_SCHEDULES *
In this routine the billing schedules are fetched from the *
database. *
FORM get_item_billing_schedules.
REFRESH tfpltdr.
CHECK NOT vbdpa-fplnr IS INITIAL.
CALL FUNCTION 'BILLING_SCHED_PRINTVIEW_READ'
EXPORTING
i_fplnr = vbdpa-fplnr
i_language = nast-spras
TABLES
zfpltdr = tfpltdr.
ENDFORM. "GET_ITEM_BILLING_SCHEDULES
*& Form ITEM_BILLING_SCHEDULES_PRINT
This routine prints the billing shedules of a salesdocument *
position. *
FORM item_billing_schedules_print.
DATA: first_line(1) TYPE c.
first_line = charx.
LOOP AT tfpltdr.
fpltdr = tfpltdr.
Output of the following printlines
IF NOT fpltdr-perio IS INITIAL.
periodische Fakturen
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_BILLING_SCHEDULE_PERIODIC'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
bei periodischen nur eine Zeile
EXIT.
ELSEIF fpltdr-fareg CA '14'.
prozentuale Teilfakturierung
IF NOT first_line IS INITIAL.
CLEAR first_line.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_BILLING_SCHEDULE_PERCENT_HEADER'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_BILLING_SCHEDULE_PERCENT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ELSEIF fpltdr-fareg CA '235'.
wertmäßige Teilfakturierung
IF NOT first_line IS INITIAL.
CLEAR first_line.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_BILLING_SCHEDULE_VALUE_HEADER'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_BILLING_SCHEDULE_VALUE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ELSEIF fpltdr-fareg CA '3'.
Schlußrechnung
ENDIF.
ENDLOOP.
ENDFORM. "ITEM_BILLING_SCHEDULES_PRINT
*eject
FORM GET_ITEM_CHARACTERISTICS *
In this routine the configuration data item is fetched from *
the database. *
FORM get_item_characteristics.
REFRESH tkomcon.
CHECK NOT vbdpa-cuobj IS INITIAL.
CALL FUNCTION 'CUD0_GET_CONFIGURATION' "#EC EXISTS
EXPORTING
instance = vbdpa-cuobj
language = nast-spras
TABLES
configuration = tkomcon
EXCEPTIONS
OTHERS = 4.
ENDFORM. "GET_ITEM_CHARACTERISTICS
FORM GET_ITEM_PRICES *
In this routine the price data for the item is fetched from *
the database. *
FORM get_item_prices.
CLEAR: komp,
tkomv.
IF komk-knumv NE vbdka-knumv.
CLEAR komk.
komk-mandt = sy-mandt.
komk-kalsm = vbdka-kalsm.
komk-kappl = pr_kappl.
komk-waerk = vbdka-waerk.
komk-knumv = vbdka-knumv.
komk-vbtyp = vbdka-vbtyp.
ENDIF.
komp-kposn = vbdpa-posnr.
CALL FUNCTION 'RV_PRICE_PRINT_ITEM'
EXPORTING
comm_head_i = komk
comm_item_i = komp
language = nast-spras
IMPORTING
comm_head_e = komk
comm_item_e = komp
TABLES
tkomv = tkomv
tkomvd = tkomvd.
ENDFORM. "GET_ITEM_PRICES
FORM GET_HEADER_PRICES *
In this routine the price data for the header is fetched from *
the database. *
FORM get_header_prices.
CALL FUNCTION 'RV_PRICE_PRINT_HEAD'
EXPORTING
comm_head_i = komk
language = nast-spras
IMPORTING
comm_head_e = komk
TABLES
tkomv = tkomv
tkomvd = tkomvd.
ENDFORM. "GET_HEADER_PRICES
*& Form HEADER_DATA_PRINT
Printing of header data like terms, weights .... *
FORM header_data_print.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'HEADER_DATA'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. " HEADER_DATA_PRINT
FORM HEADER_PRICE_PRINT *
Printout of the header prices *
FORM header_price_print.
LOOP AT tkomvd.
AT FIRST.
IF komk-supos NE 0.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_SUM'.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'UNDER_LINE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDAT.
komvd = tkomvd.
IF komvd-koaid = 'D'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'TAX_LINE'.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'SUM_LINE'.
ENDIF.
ENDLOOP.
DESCRIBE TABLE tkomvd LINES sy-tfill.
IF sy-tfill = 0.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'UNDER_LINE'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDFORM. "HEADER_PRICE_PRINT
FORM HEADER_TEXT_PRINT *
Printout of the headertexts *
FORM header_text_print.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'HEADER_TEXT'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "HEADER_TEXT_PRINT
FORM ITEM_CHARACERISTICS_PRINT *
Printout of the item characteristics -> configuration *
FORM item_characteristics_print.
LOOP AT tkomcon.
conf_out = tkomcon.
IF sy-tabix = 1.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_LINE_CONFIGURATION_HEADER'
EXCEPTIONS
OTHERS = 1.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_LINE_CONFIGURATION'
EXCEPTIONS
OTHERS = 1.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM. "ITEM_CHARACTERISTICS_PRINT
FORM ITEM_DELIVERY_CONFIRMATION *
If the delivery date is not confirmed, a text is printed *
FORM item_delivery_confirmation.
CHECK vbdpa-lfdat = space.
CHECK vbdpa-kwmeng NE 0.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_DELIVERY_CONFIRMATION'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "ITEM_DELIVERY_CONFIRMATION
FORM ITEM_PRICE_PRINT *
Printout of the item prices *
FORM item_price_print.
LOOP AT tkomvd.
komvd = tkomvd.
IF sy-tabix = 1.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_LINE_PRICE_QUANTITY'.
ELSE.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_LINE_PRICE_TEXT'.
ENDIF.
ENDLOOP.
ENDFORM. "ITEM_PRICE_PRINT
FORM ITEM_PRINT *
Printout of the items *
FORM item_print.
DATA: da_subrc LIKE sy-subrc,
da_dragr LIKE tvag-dragr.
CALL FUNCTION 'WRITE_FORM' "First header
EXPORTING element = 'ITEM_HEADER'
EXCEPTIONS OTHERS = 1.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
CALL FUNCTION 'WRITE_FORM' "Activate header
EXPORTING element = 'ITEM_HEADER'
type = 'TOP'
EXCEPTIONS OTHERS = 1.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
LOOP AT tvbdpa.
vbdpa = tvbdpa.
TVAG lesen um festzustellen ob abgesagte Positionen gedruckt werden
sollen
PERFORM tvag_select(sapmv45a) USING vbdpa-abgru
da_dragr
space
da_subrc.
IF da_dragr EQ space. "Print rejected item?
IF vbdpa-posnr_neu NE space. "Item
PERFORM get_item_serials.
PERFORM get_item_characteristics.
PERFORM get_item_billing_schedules.
PERFORM get_item_prices.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'ENDPROTECT'.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'PROTECT'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_LINE'.
PERFORM item_rejected.
PERFORM item_price_print.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'ENDPROTECT'.
PERFORM item_text_print.
PERFORM item_serials_print.
PERFORM item_characteristics_print.
PERFORM alternative_item.
PERFORM delivery_date.
PERFORM item_delivery_confirmation.
PERFORM item_billing_schedules_print.
PERFORM different_reference_no.
PERFORM different_terms.
PERFORM different_consignee.
PERFORM schedule_header.
PERFORM main_item.
ELSE.
PERFORM schedule_print.
ENDIF.
ENDIF.
ENDLOOP.
CALL FUNCTION 'WRITE_FORM' "Deactivate Header
EXPORTING element = 'ITEM_HEADER'
function = 'DELETE'
type = 'TOP'
EXCEPTIONS OTHERS = 1.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "ITEM_PRINT
FORM ITEM_REJECTED *
A text is printed, if the item is rejected *
FORM item_rejected.
CHECK NOT vbdpa-abgru IS INITIAL.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ITEM_REJECTED'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
PERFORM protocol_update.
ENDIF.
ENDFORM. "ITEM_REJECTED
FORM MAIN_ITEM *
A text is printed, if the item is a main item * -
Hi all ,
My requirement is to upload a PDF file from desktop and mail that to some address ... how this can be achieved ...
Thanks in advance ,
Ganeshuse GUI_UPLOAD and upload the pdf to internal table and then use below f.m to covert it to 255 character
CALL FUNCTION 'QCE1_CONVERT'
TABLES
t_source_tab = i_tline
t_target_tab = so_ali[]
EXCEPTIONS
convert_not_possible = 1
OTHERS = 2.
then use below f.m to send mail..
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = doc_chng
put_in_outbox = 'X'
commit_work = 'X'
TABLES
packing_list = objpack
contents_txt = objtxt[]
contents_bin = so_ali[]
*contents_hex = so_ali[]
receivers = reclist[]
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc = 0.
PERFORM mail.
MESSAGE 'Mail sent successfully' TYPE 'S'.
*SUBMIT RSCONN01 WITH MODE = MODE.
ENDIF. -
Can I copy mail prefs and mail folder from one mac to another?
Hi everyone,
My mac book pro's mail is corrupted... I've tried with a new .plist file and other than losing my settings it fixes the problem ! Instead of recreating my settings could I just replace the .plist file and the mac folder in my library from the imac (essentially the same on both computers) and be good to go without the setup hassle?
Or is this a very very very bad idea?
Thanks for the info,
Philly
Message was edited by: PhillymanYes, that should work just fine, if the same version of Mail.
For safety drag, your old mail folder and plist to the desktop, until you're sure all is well.
-mj -
Using the Mail content and Mail Attachment in the mapping
Hi,
I have a requirement in which I need to read a file from the mail server and I am using the sender mail adapter for this. I have to convert the attachment of the mail in to the payload. To do this I am using the payload swap bean and mail transform bean. Now the issue is I have to get the information from both attachment and the mail content and need to map it to the target message. Please let me know how to do this.
Thanks!
~VaasNot sure if there is a staright forward way to achieve this.
But I can think of a work around for your scenario.
>>To do this I am using the payload swap bean and mail transform bean.
Instead of doing it this way, try
1. Message Transform bean that will transform the payload(content of the mail) to XML.
2. PayloadSwapBean to switch Payload and Attachment.
3. Message Transform bean to transform the attachment to XML.
4. Custom adapter module to read the attachment, contnet and create your own desired XML.
Alternatively, step 4 could be replaced by a Java mapping doing the same operation.
Regards
Jai
Maybe you are looking for
-
After updating to the new version of iTunes, my iPad 2 is not being detected when I tried to sync. Any solutions?
-
Added a Lacie D2 Quadra hard drive and now I can't drag and drop...
Hey everyone, I was hoping someone could help me. I just bought a new 1 Terabyte D2 Quadra external hard drive for me computer. It is a Mac Pro desktop running Lion OS X 10.7.5. I just attached the hard drive to my computer and set it up. and now
-
Pdf with table of contents from a Pages file
I discovered in a pdf file sent to me that it has a table of contents in the sidebar where thumbnails, and annotations also reside. When I create a pdf from my pages document this is not available. In the table of contents sidebar are the words 'No S
-
Good Afternoon. Firstly I am very unhappy to have been charged a very high penalty amount over the last few months for not using the 'free' evening and weekend calls or 1571 as myself and my housemates have been away from the house over the summer. B
-
Corrupted files in Photoshop!
Twice now in the past week or so, while working in Photoshop, rectangular blocks of missing/distorted image have appeared. This pervades all layers, effectively destroying the entire file. And even though I quit without saving, the destroyed versio