R3 Transaction Data CIFed to APO
Hi All,
In APO ,Master data CIFed from R3 is assigned to active model and active version. Similarly ,does transaction data transferred from R3 to APO have any model related to it.
In case if I transfer a PO from R3 to APO, does it get associated to any model.
Regards
Arun
Hi Arun,
Model--> Model will have alll the master data
Vesrion--> version will have copy of all master data of assigned model & transactional data
Active model & version is "000" & "000" respectively
under one model you can have many versions but out that only one can be active version. but master data for all the version would come from respective modle. it means master data will be remain common under one modle though version changes..
but you can plan whatever you want with inactive versions.
and again to transafer data from APO to R/3 is possible only from active version. Soyou have to redo it whatever you simulated in simulation version in to active version. then this will talk with R/3
R/3 can talk with APO only with active version & activel model.......
Now once you CIF master data (plant , material..etc) will be moved to active model"000"
& transactional data will be CIFed to active verion of that model..means CIFed to active version"000"
But if ou want to work with other inactive model & inactive version..
copy version to version--->use versio copy transaction
copy modle to model--> use /SAPAPO/MVM_SVC_CO_MOD_VERS & /SAPAPO/MVM_INT_SVC_CO_VER
Regards
Thennarasu.M
Similar Messages
-
CIF of transaction data from ECC to APO
Hi,
I wanted to know where we maintain the configuration for real time transfer of transaction from ECC to APO.
I know for master data we have an option in CFC9 for real time/periodic transfer. Is there any similar config for transaction data too like sales orders etc.Hi Alok,
To allow online transfer of changes to transaction data from SAP R/3 to SAP APO, you have to activate generally the BTEs in SAP R/3.
This is done in R/3. This is the path:
SPRO --> Integration with Other SAP Components --> Basic Settings for the Data Transfer --> Change Transfer --> Change Transfer for Transaction Data --> Activate Online Transfer Using BTE
You can read about it here:
Change Transfer for Transaction Data - Integration via APO Core Interface (CIF) - SAP Library
Then of course you will need to generate and actiave your IModels.
Kind Regards,
Mariano -
What are the settings master data and transaction data from r/3 to in APO.
Hi all,
Can u suggest me ,I need to conform in apo what are the setting when transfering master data and transaction data from r/3 to APO.
frm
babuHi
The data get transfered from R3 to APO via CIF which is SAP standard.
Please find enclosed herewith the link which will provide you detail information regarding it.
http://help.sap.com/saphelp_scm41/helpdata/en/9b/954d3baf755b67e10000000a114084/frameset.htm
Please let us know if it helps you. Please also let us know if you have any more specific question.
Thanks
Amol -
CIF - Master/Transactional Data From ECC to APO
Working on CIF Data From ECC6.0 to APO(SCM 5.0)..
If i choose MRP type XO in ECC - Master Data & Transactional Data is moving properly to APO.
As we are using MRP in ECC6.0..and the MRP Type is PD...
I want to CIF the Master Data & Transactional Data using MRP Type PD? is it possible?How?
Regards,
Rajesh PatilHi Rajesh,
As visu rightly indicated, it is always safer to use XO while planning in APO. Still, if the business requirement compels to use PD, you can cif with PD, then copy the data from active to an inactive version and then carry out the simulation planning. Once results are copied, you can change the mrp type to xo in R/3 and re-cif it. Then you can compare the result in APO between active and inactive versions.
Regards
R. Senthil Mareeswaran. -
Master/Transaction data from ECC to APO-BW
Hi All,
Normally we come across scenarios where Master/Transaction data is pulled from ECC to BW and then pulled into APO-BW. What are the pros and cons of CIF (direct connection between ECC and APo-BW) rather than pulling data from ECC to stand-alone BW and then into APO-BW?
Regards,
JoyHi Santhana,
If you want to add data of ECC to APO BW & Then in to DP, then follow the following Steps.
1. Create Generic Data Source in ECC for thet Sales Order table.
2. Replicate that data Source in to APO BW with Source System.
3. Create whole data flow process by using created Data Source.
Data Flow Process: 1. Info Package
2. Info Source
3. Info Cube
4. Transformation between DS & IS, Then IS & IC
5. Data Transfer Process.
4. Load data from ECC to APO BW
5. Use transaction /n/sapapo/tscube, for copy Info Cube data to Planning Area.
Hope this will help you.
Regards
Sujay -
Transaction data from ECC to APO DP
Dear All,
Can you tell me if i can directly load transaction data directly from ECC to APO BW Infocube.
For example i want to load say sales orders from ECC.
Can i directly load from ECC --> APO BW Infocube --> DP Keyfigures.
Or any staging is required inbetween ECC and APO BW
Thanks
Santhana.Hi Santhana,
If you want to add data of ECC to APO BW & Then in to DP, then follow the following Steps.
1. Create Generic Data Source in ECC for thet Sales Order table.
2. Replicate that data Source in to APO BW with Source System.
3. Create whole data flow process by using created Data Source.
Data Flow Process: 1. Info Package
2. Info Source
3. Info Cube
4. Transformation between DS & IS, Then IS & IC
5. Data Transfer Process.
4. Load data from ECC to APO BW
5. Use transaction /n/sapapo/tscube, for copy Info Cube data to Planning Area.
Hope this will help you.
Regards
Sujay -
Hi Gurus,
Unable to do the (CCR in APO) comparison/reconciliation of transaction data PO and PR in APO Due to the error 181-Schedule line does not exist in APO ,Error code 182-Schedule line without external number does not exist in R/3.
kindly suggest me ,what we need to do corrective action from ECC side and APO side.
Regards,
BabuHi Babu,
First make sure that order is not set with deletion flag, you can check some random orders for this.
Steps to be followed:
1) for all entries with error "181-Schedule line does not exist in APO" click on "Send to APO". similarly for entries with error "182-Schedule line without external number does not exist in R/3" click on "Send to R/3", most likely this type of issue get resolved with this step only, if not.
2) Next you need to go to transaction code /n/sapapo/cq, check what all messages you are getting there. Correct the error if you are able to understand it from here i.e. rfc connection is not set, no active IM exists etc..
3) In case you are not able to understand or correct the issue from CQ, then you need to go and check in transaction code CFG1 in ECC, and /n/sapapo/c3 in APO, check in ECC with object CIF and log class "only very important logs".
In APO object "CIFSCM" and log class "only very important logs".
Most probably you will be able to get exact or directional reason of the issue.
Hope this helps.
Rgds
Sourabh -
Why APO transaction data is not stored in tables
Hi All,
Why APO transaction data is not stored in tables.
can u explain me.
BabuGood question Babu,
There indeed are tables for master data in APO database whereas the transaction data (qty, amount, dates and document numbers) are stored in a denormalized data base called livecache. But the master data too is identified with GUID's.. a cryptic and unique number given to e.g. a location, prodcuct, t/lane, customer and documents. This is because of speed of access if e.g. an external system is to fetch an information from APO using a unique session ID, instead of making a sequential read in APO tables, it read the live cache by called the GUID's that the calling characterics of the event. If one or more ECC system or an external execution system is connected to APO and one of the system collapses and rebuild again or if a system is assigned to a new business system group etc.. then its likely that systems can be out of sync and its where the live cache syncs up the data with APO tables again. If you still want to see tables in human readable format.. there are views available e..g the tables for locations LOCID and table for products MATLOC would take only GUID as inputs but the view V_MATLOC will show you the materials and locations by the numbers you know.
Hope I was able to explain. But yes the why part is still something of a mystery to me.. becasue with transparent tables it is easier to create local reports in APO and thats what probably SAP doesnt want. SAP can answer best as to what were the initial user and commercial considerations when developing APO
Regards,
Loknath -
Custom Transaction Data getting Transfer from R/3 to APO only through CFM3
Custom Transactional Data getting Transfer from R/3 to APO only through CFM3
Requirement :Automatic updation of Custom Transactional Data R/3 to APO Auto Transfer like Normal PO Changes Reflection
While working with Core Interface The Standard Transactional Data is getting updated to APO Directly for PO Qty Changes.
But I have written code in the R/3 User Exit to Calculate the Open Target Quantity and Transfer the Values to APO through the Structure .
It is Populating the values and updating in the ZTable of APO [User Exit] only when we activate and De-activate the Integration Model thru CFM3 Manually.
Could you advise and provide the info for solution if you have come across the same scenario .
Thanks in Advance.
With Regards,
Naveen Mutyapu.Hi All,
I have not received answer from the forum, but solution is without CFM3 also we can able to send data from R/3 to APO whenever we change the PO with populating the necessary values in the structure IT_OUTPUT_CUS..
Regards,
M N Kumar.
Edited by: MNKumar on Sep 14, 2010 8:23 AM -
What is the Sequence of Master data and Transaction data R/3 to APO
Hi guys,
What is the Sequence of Master data and Transaction data R/3 to APO through CIF?Hi,
Master data,
Material Indipendent data can be sent without any dependency.
Material Dependent data sequence is as follow.
Plant,
MRP areas,
Supply area,
Material,
MRP area material,
planning material,
ATP check,
Purchase info recards,
schedule agg,
PPM or PDS (But before PPM or PDS work center should send to apo) If PDS is sending then BOM should send before PDS.
Transaction data.
As per the business requirement what is planning in apo.
Regards,
Kishore Reddy. -
Requesting advice on how to initialize (delete) APO transaction data
Hello experts,
We are working on a project to implement a "clean", master-data-only APO system. The APO system is to be created by doing a full backup of an existing APO system and restore as a new instance (then BDLS to change the system ID).
My question involves the removal of all transaction data (purchase orders, released production orders, sales orders, purchase requisitions, etc) from the new APO system. We've tested several delete programs to try to remove these documents from APO (/SAPAPO/DELETE_PP_ORDER, /SAPAPO/RLCDELETE, /SAPAPO/SDRQCR21, /SAPAPO/SDORDER_DEL, /SAPAPO/OM_DELETE_INCON_ORDERS to name a few) with limited success.
Instead of removing these documents individually is it possible to simply re-initialize APO so that all transaction data is removed but all master data (PPMs, locations, products, transportation lanes, rules, etc) is kept intact?
Any advice is greatly appreciated.
Regards,
David Eady
Application Delivery Team Lead
Propex, IncHi David,
If you find the comprehensive solution, let me know!
I have had best luck with deactivating ALL IMs, then running CCR and deleting all marked as no active model. Then run the programs mentioned in your posting, as well as anything designed to make data 'consistant'. After that, there are usually some aggravating bits that don't want to go away, which I have had to chase down and delete manually. It is a tedious process, one that usually takes me a couple of days.
Regards,
DB49 -
Automated data load from APO to SEM transactional cube
Hi ,
We have BW-SEM system integrated with APO system.
I could see automated data loads from APO to SEM transactional cube ..
Infopackage name as "Request loaded using the APO interface without monitor log" ..
I don't see any infopackage by this name in both the systems ( APO & SEM )..
I am not sure how it configured ..
Appreciate any inputs on how its happens .....
Thanks in advanceHi,
As I mentioned the starting point will be the tcode BPS0. There will be 2 planning areas created (if I am correct) one for SEM cube and the other for APO cube. The better way to find it will be goto tcode se16 and enter UPC_BW_AREA and key in the cube names in the cube field. this will give you the planning area names now look for a multiplanning area which has the 2 areas included in them (this is available in table UPC_AREAM).
then goto BPS0 and you will have to find which function is being used to post the data.
thanks -
Transactional Data Copy from In-Active version to Active version(APO)
Hi
I want to copy the Transactional Planning data from Inactive version to Active version, so that from Active version I can transfer that data to ECC.
Kindly give the valuable inputs for my Query.
Regards
Guru
Edited by: gurvarender singh on Jan 31, 2009 11:18 AMtry the transaction /SAPAPO/VERCOP - to Copy Planning Version
select if u want to copy the entire version (master as well as transaction data)
u can also trigger parallel processing and also restrict
Restriction via
Location Product
Location
Locatn Type
Production Plannr
SNP Plannr
Demnd Plannr
Transptn Plannr
Purch. Group -
TABLES FOR MASTER & TRANSACTIONAL DATA
Hi all ,
can some body help me with TABLES FOR MASTER & TRANSACTIONAL DATA
DP,SNP,PP/DP.
ThanksHi,
You can find out it as per your requirement.
Use transaction SE80 - ABAP workbench -->
select Repository Information system -->
Select ABAP Dictionary --> Data base table -->
In the right hand side window you will get screen in that give details as below
Standard selection screen
Table name : enter *
In the Application Component:
You will get Tree structure to Select Application Componenet
in that expand the node of SCM --> SCM APO --> SCM-APO-MD for Master Data
Here you will get application -- Double click on the required Application
e.g. Duble Click on SCM-APO-MD-PR for Product
Here you will get list of table related to application componenet Product
<b>/SAPAPO/MATKEY Product</b>
Some of the Master Data Tables:
/SAPAPO/APNTYPE APN Type
/SAPAPO/APNTYPET Alternative Product Number Type
/SAPAPO/APO01 APO Planning Version
/SAPAPO/APO01DEL Deletion Log File Versions
/SAPAPO/APPLOCS Location Master: Relevant Location Types for Application
/SAPAPO/APPLS Application Types : SAP Application Types
/SAPAPO/CD_LOC Customizing Change Documents Location
/SAPAPO/CD_PPRFL Customizing: Change Documents: Product Profiles
/SAPAPO/CD_PRDHD Customizing: Change Documents: Product
/SAPAPO/CD_PRDLC Customizing: Change Documents: Location Product
/SAPAPO/CD_PRDLW Customizing: Change Documents: Storage Type Product
/SAPAPO/CD_PRDWH Customizing: Change Documents: Storage Type Product
/SAPAPO/CONSPROF Model Consistency Check: Check Profile
/SAPAPO/CONSPROT Model Consistency Check: Check Profile Descriptions
/SAPAPO/CUSTCHK Model Consistency Check: User-Specific Checks
/SAPAPO/CUSTCHKT Model Consistency Check: Descriptions of User-Spec. Checks
/SAPAPO/GRPTYPE Product Group Types
/SAPAPO/GRPTYPET Description of Product Grouping
/SAPAPO/LOC Locations
/SAPAPO/LOC_SUB Mapping Table for Sublocations
/SAPAPO/LOCCOMP Table Obsolete Since SCM Release 4.1
/SAPAPO/LOCMAP Mapping Table for Locations
/SAPAPO/LOCMOT Location: Means-of-Transport-Dependent Attributes
/SAPAPO/LOCPROF Version-Dependent Location Profile for Penalty Determinati
/SAPAPO/LOCT Locations Short Text
/SAPAPO/LOCVER Location: Version-Dependent Fields
/SAPAPO/LTTYPE Location Resources
/SAPAPO/LTVER Location Resources: Version-Dependent Fields
/SAPAPO/MARM Units of Measure
/SAPAPO/MATAPN Alternative Product Number
/SAPAPO/MATBOD Product BOD Assignment
Hope this information will be helpful for you work on and find out Important tables for your own BP -
Cannot transfer transactional data
Hi Experts,
I really need your help regarding this incident.
I am having problems with the APO system. I cannot transfer the transactional datas from APO to R/3. However, I am able to successfully transfer the transactional data from R/3 to APO. When I had run /SAPAPO/CCR, it returns the error "No Active Integration Model". Isn't it that integration models are only configured in R/3? I think the integration models in R/3 are properly created coz I am able to transfer the transactional data from R/3 to APO.
I would really very much appreciate your help.
Thanks again.
Sincerely yours,
RiaHi Ria,
Suggest you to again review CIF setting and make sure right logical system is defined :
CIF Settings in R/3 :
Check ALE settings or activate ALE settings
Define the logical system BD54
Assign logical system to a client SCC4
Set the RFC destination SM59
Assign target system and queue type CFC1
Maintain the SAP APO release NDV2
Activate BTEs for SAP APO integration BF11
User parameters for CIF CFC2
CIF Settings in APO :
Check ALE settings or activate ALE settings
Define the logical system BD54
Assign logical system to a client SCC4
Set the RFC destination SM59
Set up business system group
Create BSG /SAPAPO/C1
Assign logical systems to BSG /SAPAPO/C2
Maintain distribution definitions /SAPAPO/CP1
User parameters for CIF /SAPAPO/C4
Make sure you have right setting in SAPAPO/C4
Logging :Detail
Debug : Debugging off
Also check in SM58 for any error and SM59 for connect and check below thread
APO with Variant Configuration - Characterisitcs based SNP
Manish
Maybe you are looking for
-
AR Open Items and Aging question
Hi I have one question on AR Open Items aging. If Doc 100000 is posted on 4/1 with amount 25. Suppose it is cleared on 4/8. Now i get two records to BI. One will replace the existing record with Clearing Doc no and other one new posting for the clear
-
I'm importing a still into a motion project, and somehow its opacity not at 100%. However, on the behaviors tab the opacity is at 100%. It seems to be something with this particular project. I opened a new motion project, and imported the same still
-
Hi all I have a projector into which I embedded some fonts using the following commands: Insert>Media Element>Font. I chose the option to include the entire character set. After I embedded the fonts, all the spaces between the words in the movie show
-
Error while downloading Itunes! Cant download AAS!
I keep getting this error, while downloading Itunes. There is a problem with this windows installer package. A program required for this install to completecould not be run. contact your support personnel or package vendor. Ive been searching for a s
-
have single products (Illustrator, PS). want to go to CC Photography. How do I do that?