R3000 multi card reader problem

I have a problem with the sd card reader on here that it wants to format the sd card when inserted, I searched the forum for others that were having the problem, and found that I possibly need the sp29788 updated driver for it, so I downloaded it to the laptop, but am still getting the same thing. The card that I am trying to read is a 2gb that I can read with usb multi card reader, but not the one in the laptop. The driver for the multi card reader shows a 8/8/2003 date on it, the driver on the hp website sp29788 shows a 2005 date. When I installed the updated driver for it, the date on the driver still shows as 2003. What next?

Hi lincon50
I understand the memory card isn't being recognized since the wireless setup and the apple update.
Please take a look at the post from pcwizard and give it a try.
http://h30434.www3.hp.com/t5/Other-Printing-Questions/transferring-photos-from-memory-card-to-comput...
Here is a url for memory card troubleshooting.
I would test the memory card in another device.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00059994#N824
If you need more assistance just let me know.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

  • Hp officejet pro 8600 multi-card reader problem

    Have officejet 8600 printer/fax with multi-card reader.  All worked fine when wired to Apple computer before. Went wireless last week...set up router etc. All worked fine till I tried to load an sd camera card in the printer like i had done many times before.  Doesn't recognize the multi-drive...all lights start to flash..tells me i need to turn printer off/on to continue....NEVER does recognize the card reader!...
    I remember there was an update from Apple that had to do with printer drivers on Oct.15th....could that be the problem or do I need to set something else because of the wireless setup? 
    The printer works fine otherwise....it does recognize the wireless connection for straight printing. I haven't tried the fax part yet.

    Hi lincon50
    I understand the memory card isn't being recognized since the wireless setup and the apple update.
    Please take a look at the post from pcwizard and give it a try.
    http://h30434.www3.hp.com/t5/Other-Printing-Questions/transferring-photos-from-memory-card-to-comput...
    Here is a url for memory card troubleshooting.
    I would test the memory card in another device.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00059994#N824
    If you need more assistance just let me know.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • W500 card reader problems- with a wrinkle??

    My card reader won't  recognize SDHC cards.  I have a W500 (4061-BL2) running Win XP Pro, Service Pack 3.  I installed the latest drivers for the 4-in-1 reader (Ricoh Multi Card Reader driver 3.64.02 which does show up in the "Add/Remove Programs" listing).  Based on reading this forum, I considered KB934428, but, when I tried to install the hotfix, I learned it is not needed with SP3.   (I didn't try to install KB923293 which is the other hotfix frequently mentioned for this problem as it appears to be older than the ...428 hotfix??)
    Everything appears to be normal in Device Manager. 
    When I try to insert a Kingston 8GB SDHC card (that I know has pictures on it as I can see the pictures on my Canon camera), my system does recognize  the card (under "My Computer", it shows up as "SD/MMC (E", but, when I try to access the card, it only says "The disk is not formatted.. Do you want to format now?". 
    I know there are 20 other forum posts on this problem, but, mine appears  to be somewhat unique with XP SP3. 
    Like everyone else with this problem, I can read the card just fine with a USB card reader.
    Any help will be deeply appreciated!  Love the W500 except for this nagging problem as I am really anxious to use the card reader.  

    I just fixed a co-workers Ricoh 4-in-1 reader by following these instructions
    http://www-307.ibm.com/pc/support/site.wss/documen​t.do?sitestyle=lenovo&lndocid=MIGR-70881
    It says it's for R61 but worked on W500.
    Running Windows XP Pro SP2. I tried the Lenovo Drivers but they didn't work.

  • Panic when using USB 2 multi card reader

    On 2 different intel iMacs, I've got the following error using a USB2 Multi Card Reader (Shows up as a Mass Storage Device under Sys Pref):
    IOUSBMassStorageClass has corrupted the registry
    Registry - am I running windoz or something??!?!?!
    I've used this multi card reader on my G4 for a long time and never had any problems with it. On these 2 different intel iMac's it often stops importing my photos, and sometimes won't mount my memory stick cards. One one occasion I got the black/gray screen telling me to restart my computer, and that's when I got the message above. Yes, I've tried other memory cards, and a different USB cable... and at times I still loose communication with the card reader.
    Any suggestions would be great.
    Thanks!
    24" iMac 2.16 GHz Intel Core 2 Duo at Home!   Mac OS X (10.4.9)   17" iMac 1.83 GHz Intel Core 2 Duo at work!

    Hi, is your card reader Mac Intel compatible? which manufacturer?
    I would Repair Permissions then Turn Off. Disconnect everything except KB/M
    restart - I would run OnyX..then Turn Off, connect all your usb & firewire - including card reader if mac compatible! Restart..L

  • T510 Windows XP 64bit - Multi Card reader no longer working

    Just installed XP 64 bit from XP 32 because i finally got tired of windows only recognizing 2GB of RAM.
    I have just discovered the multi card reader no longer works (it worked just a few days ago with the 32 bit xp).
    i have tried uninstalling and reinstalling the driver (6hss03ww.exe - Ricoh Multi Card Reader Driver) several times, with no luck.
    i do not have any uninstalled drivers, or highlighted items in the device manager.
    Has anyone else ever has this issue, or can offer some advice? i am a bit at a loss... and ready to dump this thing out the window and buy a mac...

    Hello mate,
    Lenovo doesn't support windows xp 64-bit. If you have a look in the readme file it says
    Added support for Microsoft Windows XP Professional x64 Edition (on ThinkPad
    W510 only).
    Install windows vista or 7 if you want a 64-bit OS.
    Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
    ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
    ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

  • Memory Card "Stuck" in A720 multi-card reader

    This is an embarrassing situation. Really appreciate if someone can give me some idea.
     I just got the A720 for a few days. I used SD cards fine with A720's multi-card reader, but last night when I (gently as with the SD cards) slotted in a regular Sony memory stick in it (6-in-1, accepting MS/ MS Pro), the whole stick moved beyond the opening and well into the slot. The A720 could detect the card and I immediately copied all the file into the HD and ejected it on Windows.
    Now the memory stick  remains in(side) the card reader slot, and I dare not touch it further lest it goes further inside. Is this a design flaw? I was appalled and am frustrated by how this could have happened -- I actually used my little finger to slot the card in!. I bought the A720 mainly for photo post-processing.
    Any idea I can get the stick out (and even better slot it in without the same happening again)? Thank you.

    Hi
    Welcome To Lenovo Community
    There are various reason for a memory card to get stuck inside the card reader
    Most common is the direction in which the card is inserted, size of the card also matters or any obstacle which is their inside the card reader.
    Push a little harder on the card and it might pop out. The spring mechanism on the inside is designed to release once it is pushed past a certain point.
    If this doesn't work, you need to force it out using a flat tool. To do so Turn off your system , Press  the Power Button for 15 seconds to drain out the remaining charge
    Now use a  needle nose pliers, areal long thin one. And gently pull the memory card out.
    You can also try using a paper clip apply  glue on the edge. Very tiny amount that won't drip push clip in and touch the back of the card. Wait until it is hard in about 15 secs and pull the card out.  
    if this does not work contact Local Lenovo service center , we need to open the card reader to remove the memory card
    Hope This Helps
    Cheers!!!
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with Kudos!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!  This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Search for a driver: Ricoh Multi Card Reader for Windows 8 - for my T61 (6463) -

    Hi!
    I`m searching for a Windows 8-Driver for my T61 (6463).
    I have a Ricoh Multi Card Reader inside and I can`t find a driver for this one.
    Can anybody help me?
    Thank you,
    Heiko
    Solved!
    Go to Solution.

    Hello,
    Try downloading the following driver:
    Name:  Ricoh Multi Card Reader Driver for Windows Vista, XP
    Version:  3.54.02
    Date:  06 Mar 2008
    URL:  http://support.lenovo.com/en_US/detail.page?LegacyDocID=migr-68053
    The drivers will extract to a directory named "C:\DRIVERS\WIN\4IN1\", if I recall correctly.  Once extracted, run Device Manager (filename: DEVMGMT.MSC), go to the entry where the unrecognized card reader is located, and perform an update, using the "Have Disk" option and pointing it to the directory in which the drivers were extracted.
    I do not recall if a reboot is required, but in any case I would recommend doing one, at which point you should then be able to see the card reader from Windows 8.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • Memory Card Reader Problem

    Hi,
    I have a HP Pavilion Entertainment PC DV7-1002ea laptop, which has a multi card reader on the left side.
    However i dont know what cards i can inster directly in, i have tried my SD card and Sony Pro card but they dont seam to fit.
    Can someone please advise?
    Do i need some kind of adaptor?
    Regards,
    jay

    Yes you need an adapter. If you get a mobile phone, camera etc. there should be an adapter in the box case. I got one with my Sony Ericsson(M2 to usb). I haven't got an adapter with my HP laptop but got one with old Toshiba one. Looks like this..
    http://www.svp.co.uk/technology/peripherals/kingston-microsdhc-memory-card-with-sd-adapter-class-4-k...
    I would recommend something like this..
    http://accessories.euro.dell.com/sna/productdetail.aspx?c=uk&l=en&s=bsd&sku=A2309413&cs=ukbsdt1&dgc=...
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

  • Multi-Card Reader not working

    I have an HP a6700f
    Product Number FQ565AA#ABA
    I have had Windows 8.1 Installed on it since it's been in beta and haven't had any hardware issues. BUt today i tried to put an SD card into the built in card reader and Windows doesn't even try to read it. The transfer light stays solid the entire time.
    It has worked with previous verions of windows (vista, and 7) it's only with 8.1 that it's stopped.

    Hello davidfrnks7,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I see that your desktop is not able to read SD cards through the multi-card reader, and I would be happy to guide you towards a resolution!
    According to the page for the HP Pavilion a6700f Desktop PC Drivers selection, the only drivers available are for Windows Vista and Windows 7. Without these drivers, your computer will not be able to recognize the multi-card reader.
    This being the case, what you can do is to check for Windows drivers for your multi-card reader in Device Manager. To open the Device Manager, please follow this document on How do I get into Windows Device Manager? Once in Device Manager, please right-click on the multi-card adaptor and click on "install driver".   
    If the issue persists, you may want to refresh your Windows 8.1 back to Windows 7. To do this, please follow this document on How to refresh, reset, or restore your PC. 
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Cannot update Ricoh Multi Card Reader

    Hello All,
    I was updating Ricoh Multi Card Reader drivers on my W520 and the installation was not successful: It installed the driver, asked to restart PC, then I saw a message "installing new drivers". After all, a message "unsuccessful installation - device unplugged" popped up. How can I plug it or switch it ON?
    I even cannot see Ricoh drivers under 'IDE ATA/ATAPI controllers'.
    Any suggestions how to fix that?
    Thanks!

    A very very good question. I will check to see what answer you get.
    Drivers and updated drives as well as released BIOS upgrade should be certified and guaranteed to work. I have seen cases where that is not the case. This is a new on. I am currently holding off on my BIOS update since there is no response about the 1.41 release. I don't want to brick my MB accidentally.
    T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
    Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
    Windows 7 Home Prem - 64bit w/8GB DDR3

  • Card Reader problem with MSI K8T Neo

    Hi,
    I have the K8T Neo motherboard, and every once and a while my Atech Flash 9 in 1 card reader  (http://www.newegg.com/app/ViewProductDesc.asp?description=20-176-003&depa=0) doesn't power up, thus I can't use it.
    What's odd is that all my other USB devices work flawlessly.
    The only way I'm able to use the card reader again is to power down my computer and then flip the power switch on the psu, then turn it back on, or unplug the reader from the usb header on the motherboard and plug it back in.
    I've noticed other people have had similar issues...
    Any ideas what causes this, or any ideas on how to fix this?
    Bio Haz

    Yes, I had the same hanging problems as well with older BIOS versions then 1.7.
    But that isn't the problem I'm talking about, the computer always starts up, it's just a matter if the usb reader will work or not.
    Maybe MSI has yet to make a BIOS that is compatible with all card readers.
    BioHaz
    Quote
    Originally posted by me_AMD
    ...yes, I had USB card reader problems but it caused the computer to hang during POST, and that was fixed with BIOS v1.7...
    ...I've had what you describe happen on another machine with a Mitsumi card reader/floppy drive combo...not sure what caused it...had to disconnect it and then plug it back in...???...

  • SD Card Reader Problems

    Back at the end of December I got my Raspberry Pi in the mail. I was able to plug an SD card into my laptop and it automagically mounted just fine like any other USB device.
    Now, here we are a month later, with me wanting to put a new image on the SD card and nothing (except the RPi) can read the SD card. I've tried almost every OS I have access to: Archlinux laptop, same laptop running a Linux Mint live cd, a different laptop running windows, the windows laptop with a Mint live cd.
    The output of dmesg (putting SD card in and out):
    [ 1506.915123] usb 1-1.5: new high-speed USB device number 4 using ehci_hcd
    [ 1506.951924] hub 1-1:1.0: unable to enumerate USB device on port 5
    [ 1508.009706] usb 1-1.5: new high-speed USB device number 5 using ehci_hcd
    [ 1508.046632] hub 1-1:1.0: unable to enumerate USB device on port 5
    I've also been playing with a different SD card to try and track down the problem. This SD will only be mounted on the second laptop running Windows.
    There was a bried moment when the second SD card was able to be mounted in Arch (only after I mounted it in Windows first), but it will not mount again.
    dmesg for second card:
    [ 2378.636569] usb 1-1.5: new high-speed USB device number 11 using ehci_hcd
    [ 2378.747125] scsi8 : usb-storage 1-1.5:1.0
    [ 2379.750230] scsi 8:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
    [ 2391.150573] usb 1-1.5: USB disconnect, device number 11
    [ 2391.156248] sd 8:0:0:0: [sdb] Attached SCSI removable disk
    Any suggestions?

    So I will try reinstalling the driver, but I think I need one for Vista and not XP, right? 
    Sorry about that, Linda. I edited my post to show the correct driver..
       Realtek Card Reader (32/64bit)
    -Jerry

  • Windows 7 64-bit: Switchable graphics and Ricoh card reader problem

    Hi guys,
    Two problems with my laptop. I'm using a T400, previously installed with Windows Vista Business 32-bit.
    Switchable graphics worked well until I formatted and installed Windows 7 Pro 64-bit (I got the RTM through MSDNAA). Now, Windows can only detect either the discrete graphics or integrated graphics at one time. When the BIOS was set to switchable graphics and enabling the detection of switchable graphics on Windows, it could only detect the Intel integrated graphics. When I try to switch to High Performance graphics through the Lenovo power manager, the screen flashes once, and the ATi graphics card appears on the device manager with the code 10 error (cannot start device). Also, compared to this image, my power manager window that opens with left-click does not have battery stretch and switchable graphics options. I have to right-click to switch my graphics.
    After some tinkering, I managed to activate the graphics card through the BIOS by switching it to discrete graphics only and disabling switchable graphics detection by Windows. Now the device manager shows the ATi card only, the Intel integrated graphics is gone. I understand that it should show both display adapters in the device driver when the ATi card is active: http://www-307.ibm.com/pc/support/site.wss/MIGR-70495.html#g4
    The second problem is with the Ricoh card reader. I managed to install the drivers properly, but the device shows up with a code 12 error (This device cannot find enough free resources that it can use) in the device manager. That error appears on 6 items in the device manager:
    Ricoh Memory Stick controller
    Ricoh SD/MMC Host controller
    Ricoh xD-Picture card controller
    Ricoh 1394 OHCI Compliant host controller
    Ricoh R/RL/5C476(II) or Compatible CardBus controller
    SDA Standard Compliant SD host controller
    Additionally, 6 error messages appear during every boot up, which I think is related to these 6 devices:
    ERROR
    Resource Conflict - PCI in slot 07
    Bus:15, Device:00, Function: 00 (it ranges from function 00  to 05)
    AND disabling the device through device manager results in a BSOD.
    I've seen some people post about the Ricoh problem, but didn't have any resolution (at least for those who had the boot up error message too). The switchable graphics problem seems quite common too but in my case it seems like it is working fine EXCEPT for the fact that only one graphics adapter can appear on the device manager at one time and I can't do switching at all. Anyone know if I can somehow solve this? Sorry for the wall of text and two-problems-in-one. I put them together because I don't know if one problem is affecting the other as both problems appeared at around the same time.

    As far as the graphics goes it's well accpeted the only way at present to switch is though the bios manually. There is currently no drivers that enable users to switch from within Win7. Know it's a pain but will just have to wait.

  • USB/memory card reader problem,  any help would be great

    Hello all, I bought a new memory card reader today and our computer will not recoginize it's there. The reader is a Targus universal 32 in 1 memory card reader/writer and I think the model is TGR-CRD25, it also says USB 2.0. I didn't have any problems with the old reader as far as the machine "seeing" the reader. This new reader does show up in the system profiler but the little power light will not come on and I get a "low power for device" type message when I plug it in. I unplugged the keyboard and plugged in the new reader to the USB port where the keyboard was connected and the light came on on the reader but iphoto was still saying no storage device when I tried to import pictures? Any ideas?

    There is very little extra power available once the mouse is hooked to the keyboard. The "real" solution is to get a USB Hub with its own power supply.

  • Memory Card Reader problems

    I have seen this problem for a long time on Arch. This was occuring when I used an external SCSI memory card reader, and now I notice the same thing with my new linux box which has an internal 15-in-1 card reader connect to the USB card. It goes like this ...
    When I insert the card, my KDE desktop fails to notice it. When I open a terminal and run dmesg, nothing relevant shows up. When I attempt to mount the device, I'm told it doesn't exist. After some passage of time, it will still fail, unless I do a fdisk on that device to see if fdisk sees it. Sometimes it takes a few fdisks to find it, but eventually it seems to find it. At that point I can mount the device. But one thing that has been true in the past as well as the present ... I must issue a fdisk command for that device (and then exit fdisk) before Arch Linux ever sees the device. This has been true since 0.6x Arch, and now true of 0.72 Arch, on two different boxes and with two different card readers.

    i had this prob ages ago. was even convinced it was some physical slots that were broke, (rear slots worked fronts didnt )or one particular cardreader (gtech 21-in-1) as it glitched under windows too.
    at some point tho, in Arch anyways, the problem went away, and i think now it was more to do with modules and confs and it got solved more by tinkering than knowing what was what definitively. we live and learn
    maybe try as su - root  lsmod |grep usb
    my reply is
    [root@localhost ~]# lsmod |grep usb
    usb_storage            78656  0
    usbhid                 47392  0
    usbserial              29260  0
    usbcore               116256  7 ohci_hcd,usb_storage,usbhid,ehci_hcd,uhci_hcd,usbserial
    ide_core              116940  29
    usb_storage,ide_scsi,ide_floppy,ide_cd,ide_disk,via82cxxx,trm290,
    triflex,slc90e66,sis5513,siimage,serverworks,
    sc1200,rz1000,piix,pdc202xx_old,pdc202xx_new,ns87415,
    it821x,hpt366,hpt34x,generic,cy82c693,cs5530,cmd64x,atiixp,
    amd74xx,alim15x3,aec62xx
    (ide_core line reformatted so page isnt a mile wide.)
    also, check in rc.conf MODULES for usbserial and if theres a ! in front of it, remove it.

Maybe you are looking for

  • Creative Cloud prepay

    I am currently paying monthly for Adobe Creative Cloud. As a student with financial instability, I hate monthly payments, and I was thrilled to see that there is now a prepay option. The only problem is that it is a limited offer. My Creative Cloud S

  • Downloading previous versions of adobe software

    I recently purchased a new computer without a disk drive and have Adobe Acrobat Pro X on cd.  Is it possible to download the program and then put my licensing information in it.

  • Accessing two different wls instances in Apache

    Hi! Does anyone know if it is possible to connect to two different instances of wls 5.1 sp 6 (same IP, different ports) from an apache front-end under the same <VirtualHost>-instance, using mod_wl_ssl.so?

  • My MacBook Pro freezes after opening any application or trying to update

    HELP! I haven't used my mac for a while and when I booted it up, I did all my usual things when I didn't use my mac for a long time, like opening software update. But software update froze after trying to download a firmware and iTunes update. I thou

  • Backup Failure using OEM

    Backup Failure using OEM I have oracle 9i (windows 2000 server) I tried to make a fullbackup using OEM, it gives me NO error messages I got result file with 890 MB (my Db is not huge), but when I go back to the JOBs in OEM I found the status of the j