R3AS and R3 Queues

MAX POINTS will be awarded for a solution
hi All,
I am trying to replicate Material and Groups from R3 to SRM using R3AS.
It works great in an environment ...but fails in another. I need your help in debugging it
I follow the steps at end of my question based on what I found in other threads.
The place where it fails is
4.     If the queue is locked, try to release the lock on it and to activate it. If the queue disappears after you select Refresh, the download process has proceeded further.
Seems to be some configuration that I am not aware of.
R3 Destinations SMOEAC seems to be configured correctly.
All helps is appreciated.
Thanks,
Nikhil
===========================================
Complete Steps
===========================================
Pre-requisites.
1. Ensure All Queues on SRM and R3 side are deleted before you start
2. Jobs for DNL_CUST_PROD0 and DNL_CUST_PROD1 should be either completed or aborted
Below are the steps for running R3AS transaction or SMOF_DOWNLOAD scheduled job and debugging it in any SRM environment.
For Running R3AS
1.     To start run R3AS from SRM environment.
2.     Select DNL_CUST_PROD0 for Load Object. This auto populates the Source R3 and Destination site CRM.
3.   Run it and follow below process to check if its complete.
Checking the Download is Complete
1.     To start the Download Monitor, call transaction R3AM1, type DNL_CUST_PROD0 under Object Name, click Execute button.
2.     If all the traffic lights are green, the download was successful. If a traffic light is yellow, select Refresh and observe whether the block number increases. If so, the download is still in progress. If not, continue with the next step.
3.     In the backend R/3 system, check the outbound queue in transaction SMQ1. For Queue name, enter the correct queue name, and choose Execute to display the queue.
4.     If the queue is locked, try to release the lock on it and to activate it. If the queue disappears after you select Refresh, the download process has proceeded further.

Hi
Where is configuration of queues done?
How does running of transaction R3AS with DNL_CUST_PROD0/1, R/3, CRM know what queue to run in R3
Also how is data posted from R3 to SRM.
FYI i read following Notes and still not sure whats wrong
Note 429423 - CRM Release: General analysis of the initial Load
Note 430980 - CRM Server: Analysis in delta data exchange R/3->CRM
Note 720819 - Middleware consumer entry for SRM 40 and 50 in the OLTP-syst
Note 632223 - Using other consumer as CRM
Issue is when I run the transaction R3AS with DNL_CUST_PROD0/1, R/3....I see a queue on R3 ...but when i try to unlock it ...there is no Destination. When i put a destination, status of the queue remains the same "STOP"
Nikhil

Similar Messages

  • Significance of Inboun and Outbound queue in sales order replication

    Hi CRM Leads,
    What is the significance of Inbound Queue and Outbound queue in saleas order replication from CRM to ECC.
    What exactly happens in Outbound Queue and Inbound Queue.
    Thanks,
    Sandeep
    What

    Inbound - Tcode: SMQ2 :  Inbound in the context of CRM and this queue shows the business transaction, master data and configuration data that are coming from ECC into CRM .
    Naming Convention for Queues
    The names of queues for data transfers from an ERP back end to the CRM server are made up as follows:
      R3A (from ERP back end to CRM)
        I for the initial data transfer / for Data Synchronization
        D for the delta data transfer
        U for loading to the ERP back end
        R for Defining Requests
        <Object> Name or part of object name, or the name of the higher-level independent object
        <Key> Only delta queues are subdivided by keys
    Outbound - Tcode SMQ1 - Outbound in the context of CRM and this queue shows the transactions and data that are going from CRM to ECC
    See more on [Using CRM Queues|http://help.sap.com/saphelp_crm70/helpdata/EN/49/2d9d9707361903e10000000a42189c/content.htm] following the link.
    Read the [CRM Adapter Framework|http://help.sap.com/saphelp_crm70/helpdata/EN/49/2e33a2a6c51d24e10000000a421937/content.htm] for advanced learning.

  • How to delete the data in update queue and delta queue for Queued delta?

    Dear BWers,
    How do i delete the delta queue and update queue data before i fill the setup tables for a extraction based on Queued delta. Please help.
    Thanks
    Raj

    Hi Raj,
    I think you need some ground work for the LO extraction same as others here. Please read the 3 blogs expliciltly created for LIS by Robert Negro.
    /people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
    /people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
    /people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
    As well, the OSS 380078 would clear your doubts reagrding the the BW QUEUE mainatinance. 
    Please let me know if these material has been suffecient enough.
    regarda,
    raj

  • HP 1160 printer and HP newer printers and print queues

    FYI. The HP 1160 printer does not support queue based printing.
    We use Novell 5, IPX, and print queues. Our company has always been HP
    LaserJet printers based. They have been very reliable and only recently did
    we need to replace one. We have small workgroups so lighter duty printers
    have been fine and the 1160 seemed comparable to others we still use. Until
    we just purchased the 1160 all previous HP printers had supported Novell
    print queues. Hp tech support said it was a Novell issue..(typical cop out).
    Any input on what new HP printers actually support Queue based printing
    would be appreciated. Nothing on their web site actually indicates this
    support (or lack of it).
    Thanks
    Terry B

    You can always use external jet directs if necessary.
    Additionally, if they support LPR, you can use PrintQs via NDPS.
    ( No NDPS support required on the client side.)
    Terry B wrote:
    > FYI. The HP 1160 printer does not support queue based printing.
    >
    > We use Novell 5, IPX, and print queues. Our company has always been HP
    > LaserJet printers based. They have been very reliable and only recently did
    > we need to replace one. We have small workgroups so lighter duty printers
    > have been fine and the 1160 seemed comparable to others we still use. Until
    > we just purchased the 1160 all previous HP printers had supported Novell
    > print queues. Hp tech support said it was a Novell issue..(typical cop out).
    >
    > Any input on what new HP printers actually support Queue based printing
    > would be appreciated. Nothing on their web site actually indicates this
    > support (or lack of it).
    >
    > Thanks
    >
    > Terry B

  • Compare creation of Datasources and JMS Queues : SAP vs (Weblogic/Websphere

    I am used to creating JDBC Datasources and JMS Queues on Weblogic/Websphere thru their Admin applications.
    Can someone compare/contrast that process to that on SAP's netweaver ( either using NWA or Visual Administrator).
    Thanks

    Hi Parag,
    For the process of creating JDBC datasources and JMS resources @ SAP NetWeaver you can refer to the documents here on SDN and help.sap.com, and compare that process for yourself, thus not being influenced by others' biased or unbiased opinions.
    For NetWeaver 04 and 04s these would be:
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/b0/6e62f30cbe9e44977c78dbdc7a6b27/frameset.htm">JDBC Connector Service</a>
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/22/cf4e71c46cdb4da31153be96c5389f/frameset.htm">JMS Connector Service</a>
    For the <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/javaee5">Java EE 5 Edition</a>:
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7bb9751d-0e01-0010-febd-c3adce2c408c">Working with Database Tables, DataSources and JMS Resources</a>
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/806e75a0-0e01-0010-2587-fc518de8ac1a">Administration Guide</a> -> section "Application Resources Management" (pages 89-104)
    Hope that helps!
    Your feedback/findings are very welcome!
    -Vladimir

  • Nested Tables and Advanced Queues- Please Help.

    How do i work with NestedTable type and Advanced Queue.
    I have done the following
    I have Oracle 8.1.7 enterprise edition.
    create type myType as TABLE OF varchar(32);
    create type myObject as OBJECT (
    id int,
    myt myType);
    DECLARE
    BEGIN
    dbms_aqadm.create_queue_table(
    queue_table => 'my_queue_table',
    multiple_consumers => TRUE,
    queue_payload_type => 'myObject',
    compatible => '8.1.3'
    END;
    The Nested Table and Object are created successfully.
    but the queue is not created.
    I get the following message.
    DECLARE
    ERROR at line 1:
    ORA-22913: must specify table name for nested table column or
    attribute
    ORA-06512: at "SYS.DBMS_AQADM_SYS", line 2012
    ORA-06512: at "SYS.DBMS_AQADM", line 55
    ORA-06512: at line 3
    I know how to specify the nested table storage clause for
    create table statement, but there is no provision for
    it in the create_queue_table procedure.
    Any help will be greately appriciated.
    i have already created and tested aqs with simple data types,
    also i have created simple tables with nested table type
    elements.
    but the combo of Nested tables and AQ is not working.
    thanks in advance.

    Hi Francois. Thank you very much for your reply, but it seems that i still get errors. So let me tell what i have done.
    As you suggested me: i have done a block based on a sub-query for the nested-table:
    'select courses from department where name= :department.name'.
    In the master block(department) i have the when-new-record-instance trigger:
    Declare
    LC$Req varchar2(256);
    Begin
    LC$Req := '(select ns.courses from table
    ( select courses from department where name = ''' || :DEPARTMENT.name || ''' ) ns )';
    Go_block('block11');
    Clear_Block ;
    Set_Block_Property( 'block11', QUERY_DATA_SOURCE_NAME, LC$Req ) ;
    Execute_query ;
    End ;
    Now the errors i receive, this time in the runtime mode are:
    - FRM-41380: Cannot set the blocks query data source
    -FRM-41003: This function cannot be performed here.
    Since it seems that you know how to work with the nested table i would really appreaciate your help. I am new in the nested table and if you could give an ex with my tables it would be great.
    Thank you in advance.

  • Messages stuck in QRFC inbound and outbound queues by system error

    Hi Experts,
    We faced a big problem in our PI server which stopped all the traffic in the iDoc to File interface. Both the QRFC queues (inbound - SMQ1 as outbound - SMQ2) where stuck by a system error.
    In IDX5 of PI we saw two inbound iDocs on exact the same date/time of creation. Both iDocs are displayed in SXMB_MONI with the status "Canceled - Since Already Processed". The output files of both iDocs are generetad on the outbound side.
    The output files are genereted with a date/time stamp in filename exactly as: "pi_20101106-221812-437.dat" and "pi_20101106-221812-438.dat". So it seems that both processes where running on exact the same time.
    When looking into the system error we see the following details:
    com.sap.engine.interfaces.messaging.api.exception.DuplicateMessageException: Message Id 00505697-181b-1ddf-babd-68f1ac208528(INBOUND) already exists in duplicate check table: com.sap.sql.DuplicateKeyException: [200]: Duplicate key
    This caused that the QRFC queues where both stuck in inbound as outbound with a SYSERROR, so PI stopped and the queues should be reactivated manually.
    Does anybody have some idea of the real cause of this error. We really want to prevent such situation in the future.
    Thanks in advance!
    Best regards,
    Joost

    Hi Joost,
    Are you using an adpater module to avoid the same file name processed by the receiver channel ???
    If this is the case change the filename and retest flow otherwise remove the module (ex: localejbs/AF_Modules/MessageTransformBean - Local Enterprise Bean) from the channel check it whether the file getting processed or not...
    OR...you have an incorrect module configuration in the receiver channel.
    Do not remove the standard SAP module and make sure that you add additional modules before it.
    cheers,
    Ram.

  • How to automate checking status of Replication agent and Replication queue in CQ5

    As part of monitoring the status of replication agents and replication queue, is it possible to automate the checking process?
    We can check them from GUI, but from a monitoring perspective we are loking for a mechanism where the status can be checked continuously and we are alerted whenever there is some issue.
    1. Check status of replication agent (enabled/disabled)
    2. Check status of replication queue (if the queue is blocked)
    Thanks in advance
    nkrao

    you can pull the queue from the page the same way the UI gets the list
    in the table:
    curl -u admin:admin
    "http://localhost:4502/etc/replication/agents.author/publish/jcr:content.queue.json?agent=p ublish"
    and then use a shell library like ticktick.sh to parse the json
    response. A sample of how to get the bundles loaded and installed from
    CQ using the ticktick library can be found here
    https://github.com/kristopolous/TickTick
    http://ruben42.wordpress.com/2012/04/24/using-ticktick-sh-to-parse-json-responses-from-ado be-cq5-5/

  • What is the difference in the System Event triggers: Any queue limit set to zero and System queue reached its job limit

    My co-worker and I are not sure what the difference between Any queue limit set to zero and System queue reached its job limit are in the System Events.

    Hi jlayton,
    System queue limit is the sum of all queue limits you have defined. For example, if you have a system queue limit of, say, 100 -- queue A has 50 jobs active, and queue B also has 50 jobs active, then you will receive an alert System queue reached its job limit since it is set to 100.
    Any queue limit set to zero. Note, this may also include the System queue. For example, if you want to gracefully stop Tidal, you may want to set system queue = 0 so that there are no active jobs. When you do this, you will receive an alert queue limit set to zero.
    BR,
    Derrick Au

  • Authentication problem w MDB on WL8.1 and JMS Queue on WL6.1

              Hi,
              I'm having problems with a MessageDrivenBean that is deployed on a Weblogic 8.1
              server. It listens to a JMS Queue on a Weblogic 6.1 server.
              I'm getting the following error message upon deployment:
              [java.lang.SecurityException: Authentication for user system denied in realm wl_realm
              I've made sure that both servers are installed with the user "system" and a password
              of "password".
              This worked fine for two WL6.1 servers.
              Here's my ejb-jar.xml:
              <!DOCTYPE ejb-jar PUBLIC
              '-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 2.0//EN'
              'http://java.sun.com/dtd/ejb-jar_2_0.dtd'>
              <ejb-jar>
                  <enterprise-beans>
                      <message-driven>
                          <ejb-name>WebResponseJMSBean</ejb-name>
                          <ejb-class>com.ditech.webresponse.jms.WebResponseJMSBean</ejb-class>
                          <transaction-type>Container</transaction-type>
                          <message-driven-destination>
                              <destination-type>javax.jms.Queue</destination-type>
                          </message-driven-destination>
                      </message-driven>
                  </enterprise-beans>
                  <assembly-descriptor>
                      <container-transaction>
                          <description>Transaction attributes for 'WebResponseJMSBean' methods</description>
                          <method>
                              <ejb-name>WebResponseJMSBean</ejb-name>
                              <method-name>*</method-name>
                          </method>
                          <trans-attribute>NotSupported</trans-attribute>
                      </container-transaction>
                  </assembly-descriptor>
              </ejb-jar>
              Here's my weblogic-ejb-jar.xml:
              <?xml version="1.0"?>
              <!DOCTYPE weblogic-ejb-jar PUBLIC
              '-//BEA Systems, Inc.//DTD WebLogic 6.0.0 EJB//EN'
              'http://www.bea.com/servers/wls600/dtd/weblogic-ejb-jar.dtd'>
              <weblogic-ejb-jar>
                  <weblogic-enterprise-bean>
                      <ejb-name>WebResponseJMSBean</ejb-name>
                      <message-driven-descriptor>
                          <destination-jndi-name>com.ditech.jms.CowResponseQueue</destination-jndi-name>
                          <provider-url>t3://localhost:7003</provider-url>
                          <connection-factory-jndi-name>com.ptp.jms.AppOnlineConnectionFactory</connection-factory-jndi-name>
                      </message-driven-descriptor>
                      <jndi-name>ejb/WebResponseJMSBean</jndi-name>
                  </weblogic-enterprise-bean>
              </weblogic-ejb-jar>
              Can anyone give me any suggestions?
              Thanks in advance,
              -Ben
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 

              We are facing a similar issue, between MDB's and JMS Queues on 2 separated WebLogic
              8.1 domains. What I will test next week are:
              1. In the domain where my MDB's are deployed, configure Foreign JMS Servers/Connection
              Factories/Queues, for which passwords can be specified (not possible in weblogic-ejb-jar.xml)
              2. If No.1 does not work, I will add CredentialGenerated="false" in <SecurityConfiguration>
              in config.xml in both domains
              3. If No. 2 still does not work, I will specify run-as principal and security-role
              in my MDB DD files, and specify CredentialMapping via the WebLogic admin console.
              Maybe you can try the same?
              Eric Ma
              "B Liu" <[email protected]> wrote:
              >
              >Hi,
              >
              >I'm having problems with a MessageDrivenBean that is deployed on a Weblogic
              >8.1
              >server. It listens to a JMS Queue on a Weblogic 6.1 server.
              >
              >I'm getting the following error message upon deployment:
              >
              >[java.lang.SecurityException: Authentication for user system denied in
              >realm wl_realm
              >
              >I've made sure that both servers are installed with the user "system"
              >and a password
              >of "password".
              >
              >This worked fine for two WL6.1 servers.
              >
              >Here's my ejb-jar.xml:
              >
              ><!DOCTYPE ejb-jar PUBLIC
              >
              >'-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 2.0//EN'
              >
              >'http://java.sun.com/dtd/ejb-jar_2_0.dtd'>
              >
              >
              ><ejb-jar>
              >
              >    <enterprise-beans>
              >
              >        <message-driven>
              >
              >            <ejb-name>WebResponseJMSBean</ejb-name>
              >            <ejb-class>com.ditech.webresponse.jms.WebResponseJMSBean</ejb-class>
              >            <transaction-type>Container</transaction-type>
              >            <message-driven-destination>
              >                <destination-type>javax.jms.Queue</destination-type>
              >            </message-driven-destination>
              >
              >        </message-driven>
              >
              >    </enterprise-beans>
              >
              >    <assembly-descriptor>
              >
              >        <container-transaction>
              >
              >            <description>Transaction attributes for 'WebResponseJMSBean'
              >methods</description>
              >            <method>
              >                <ejb-name>WebResponseJMSBean</ejb-name>
              >                <method-name>*</method-name>
              >            </method>
              >            <trans-attribute>NotSupported</trans-attribute>
              >
              >        </container-transaction>
              >
              >    </assembly-descriptor>
              >
              ></ejb-jar>
              >
              >Here's my weblogic-ejb-jar.xml:
              >
              ><?xml version="1.0"?>
              >
              >
              >
              ><!DOCTYPE weblogic-ejb-jar PUBLIC
              >
              >'-//BEA Systems, Inc.//DTD WebLogic 6.0.0 EJB//EN'
              >
              >'http://www.bea.com/servers/wls600/dtd/weblogic-ejb-jar.dtd'>
              >
              >
              ><weblogic-ejb-jar>
              >
              >    <weblogic-enterprise-bean>
              >
              >        <ejb-name>WebResponseJMSBean</ejb-name>
              >
              >        <message-driven-descriptor>
              >
              >            <destination-jndi-name>com.ditech.jms.CowResponseQueue</destination-jndi-name>
              >            <provider-url>t3://localhost:7003</provider-url>
              >            <connection-factory-jndi-name>com.ptp.jms.AppOnlineConnectionFactory</connection-factory-jndi-name>
              >        </message-driven-descriptor>
              >
              >        <jndi-name>ejb/WebResponseJMSBean</jndi-name>
              >
              >    </weblogic-enterprise-bean>
              >
              ></weblogic-ejb-jar>
              >
              >
              >Can anyone give me any suggestions?
              >
              >Thanks in advance,
              >-Ben
              >
                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                             

  • Creating a MDB and Distributed Queue in Clustered env in weblogic 9.2

    I have created 3 managed servers and all these managed servers are in the cluster.
              Now i create JMS module for this cluster and create the Connection factory 'QUEUE_CF_8' and distributed Queue 'DIS_QUEUE_8' targeting to the cluster.
              I create a MDB and JMS client and deploy them in the cluster.JMS client sends the message to the distributed queue and MDB is listening to the distributed queue
              When i deploy the MDB , it is deploys perfectly . But when i run the client it fails with the following exception
              [java] javax.naming.NameNotFoundException: Unable to resolve 'QUEUE_CF_8'. Resolved '' [Root exception is javax.naming.NameNotFoundException: Unable to resolve 'QUEUE_CF_8'. Resolved '']; remaining name 'QUEUE_CF_8'
              When i view the JNDI tree for all the managed servers , i can see the Connection factory and the distributed queue.
              Also i deploy the MDB to the cluster and no submoduletargets are specified.
              Let me know what is that iam missing.

    <?xml version='1.0' encoding='UTF-8'?>
              <weblogic-jms xmlns="http://www.bea.com/ns/weblogic/90" xmlns:sec="http://www.bea.com/ns/weblogic/90/security" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:wls="http://www.bea.com/ns/weblogic/90/security/wls" xsi:schemaLocation="http://www.bea.com/ns/weblogic/920 http://www.bea.com/ns/weblogic/920.xsd">
              <connection-factory name="Queue_CF_8">
              <sub-deployment-name>Server_group_4</sub-deployment-name>
              <jndi-name>QUEUE_CF_8</jndi-name>
              <security-params>
              <attach-jmsx-user-id>false</attach-jmsx-user-id>
              </security-params>
              </connection-factory>
              <uniform-distributed-queue name="DIS_QUEUE_8">
              <sub-deployment-name>Server_group_4</sub-deployment-name>
              <jndi-name>DIS_QUEUE_8</jndi-name>
              <load-balancing-policy>Round-Robin</load-balancing-policy>
              </uniform-distributed-queue>
              </weblogic-jms>
              But the problem was with the clustering.
              Thanks for your time..

  • Are Connection Factory and JMS Queue supposed to be in JNDI tree

    I have created Connection Factory and JMS Queue. I am expecting to find both in JNDI tree. Where, in the http://localhost:7001/console/consolejndi.portal, could I find them? I mean, in which branch of the JNDI tree?

    Hi,
    You should find them following exactly the way you define their JNDI Names... Make sure you are looking into the JNDI tree for the right managed server... Pay attention into the targets of your connection factory and queue...
    For example, a JNDI name jms.myConnectionFactory (or jms/myConnectionFactory) targeted to soa_server1 will appear under soa_server1 / jms / myConnectionFactory ...
    Hope this helps...
    Cheers,
    Vlad

  • Diff between update queue and delta queue

    hi all
    can anyone tell me wats is the diff between update queue and delta queue? wats is delta queue and update queue?
    wats are the possible system generated errors and custom generated errors?
    Thanks,
    Shreya

    Hi Shreya,
       Update queue(LBWQ) comes into the picture when you choose Queued Delta for the Datasource. the data first comes to the Update queue and than goes to the Delta queue, however if you have choosen Direct Delta than the posted record will directly go to the Delta queue(RSA7).
    Here is the URLS for Roberto's weblog to understand the whole LO-Extraction process.
    /people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
    /people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
    /people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
    /people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
    Hope it helps you!!!!
    Regards,
    Amit
    Pls do not forget to assign points, if helpful.

  • What is differences extraction queue, delta queue and uddate queue ?

    hi guru's
    What is differences  between extraction queue, delta queue and uddate queue ? can u describe briefly?
    Thanks & Regards
    nandi

    Dear Prabha,
    Basically when any document is posted in R/3, it is updated to the update table, from there it is taken to our delta queue for send it to BW side.
    When extraction starts, data is sent to BW from delta queue. then again this cycle starts.
    When you post any document in OLTP system (eg SAP R3),
    say create sales order by VA01, then posting is made to application tables (VBAK/VBAP) through V1 and also to sm other tables through V2, Communication structure written to update queue/extraction queue/delta queue(directly) as per the update mode selected. V3 is always followed by V2 and we are supposed to schedule it.
    From this delta queue, data is extracted by BW infopackages.
    There are various update methods according to which extraction or delta queue are used, so when document posting takes place it also write data into extraction queue (through V1 update) and if we use queued delta method then this data is collected in collection run and written to delta queue and from this delta queue we request for data from BW.
    There are lots of posts on SDN for this, please have a look on those.
    one for your reference...
    https://www.sdn.sap.com/irj/sdn/profile?userid=3507509
    Hope it helps...
    Message was edited by:
            Ashish Tewari

  • Machine statistics paging and run queue

    Hi,
    we have databses in 10g R2 on Windows 2003 server. We have DB grid control for each ( but not OEM 10g). We can not see machine statistics paging and run queue in performance tab. Is it normal ? and only OEM 10g can present it ?
    Many thanks.

    Hi,
    we have databses in 10g R2 on Windows 2003 server. We
    have DB grid control for each ( but not OEM 10g). You have "DB grid control for each ( but not OEM 10g)." ?

Maybe you are looking for