R3Setup.bat Error " This platform not supported"
Dear All,
I am trying to install SAP R3 4.6C
I have installed SQL2000 server and SP4 On windows 2003 (x64)server
When I run the R3setup.bat , I receive a error message on the screen like
"Thsis platform is not supported".
1. I have not installed J2sdk. Is j2sdk required for SAP R3 4.6C.?
please let me know how to fix this issue?.
Or is it because hardware platform not supported ?/
Thanks
Elumalai
Duplicate post
Read and Follow forum rules
Ans: follow standard installaiton guides will tell you pre-requisites and supported platforms
Similar Messages
-
Using wall charger and am now getting error message "charging not supported by this accessory." Have been using since December and this is first time I have encountered this.
Did you look to see if there is debris or dust causing the problem? Get a flashlight and take a look to make sure.
Is there something in the USB end of the cord perhaps?
You didn't answer this question ....Are you using the charger and cord that came with your iPad?
You could try changing cords if you have another one available to see if it is the cord. Have you tried connecting to your computer to see if you get the same message?
You could try a hard reset by holding down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears, let go of the buttons and let the iPad restart. Then try the charger again. -
IPhone error "Charging is not supported with this accessory"
I keep getting error "Charging is not supported with this accessory" ever since the last update. I only get this message when iphone is locked and not plugged in to anything. When phone is locked the message keeps popping up every few seconds, consiquently I'm having to charge at least twice a day!
Error only occurs when not plugged in & iphone locked & doesn't make any difference if wifi on or off
Connectors have been cleaned
iphone has been restored
iphone has been re-booted
Nothing seems to work and after researching, all similar posts seem to be pertaining to actually plugging in to something and the fix was "clean connector" this is not my problem, error only happens if not plugged in. I'm assuming it's a bug from the last update but my girlfriends iphone is fine.
Would someone please help as the drain on my phone is rediculous now, it wasn't that good to start with but now the phone is pretty useless unless I'm near a plug! It's also very annoying having the screen constantly coming to life with this error message, especially at night.
Thanks in advance for any help.
Wayne.I've not been able to find any new solutions so I thought I would try repeating everything I've tried again. I started by re-cleaning the connector as, logically my error only occurs when not plugged in to anything. To my amazement the problem is now resolved, I did take quite a while cleaning this time using toothpicks, cotton buds and nail varnish remover. So I geuss I should have cleaned it better in the first place! Doh! Anyway it's FIXED!!
-
Error: Driver does not support this function
Hi there people!
I'm a newbie in jsp and I encountered this error: Driver does not support this function. I'm using odbc:jdbc and access. Can someone please tell me what is wrong?
<%@ page import = "java.sql.*" %>
<%@ page import="java.io.*" %>
<%@ page import="java.util.*" %>
<HTML>
<title>Stock Portfolio</title>
<body>
<body bgcolor="gray"><center>
<table border = 1>
<tr>
<td><th>Symbol</td></th>
<td><th>Type of Transaction</td></th>
<td><th>Date</td></th>
<td><th>Shares</td></th>
<td><th>Price</td></th>
<td><th>Stock Commission</td></th>
<td><th>Stock Brocker Name</td></th>
<tr>
<% String symbol = request.getParameter("symbol");
String type = request.getParameter("type");
String date = request.getParameter("date");
String shares = request.getParameter("shares");
int ishares = Integer.parseInt(shares);
String price = request.getParameter("price");
float fprice = Float.parseFloat(price);
String commission = request.getParameter("commission");
float fcommission = Float.parseFloat(commission);
String bname = request.getParameter("bname");
%>
<% String url ="jdbc:odbc:Product";
try
{ Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection con = DriverManager.getConnection(url,"","");
String query = "INSERT INTO Stock (dbsymbol,dbtype,dbdate,dbshares,dbprice,dbcommission,dbname) VALUES (?,?,?,?,?,?,?)";
PreparedStatement pstmt = con.prepareStatement(query);
pstmt.setString(1,symbol);
pstmt.setString(2,type);
pstmt.setString(3,date);
pstmt.setInt(4,ishares);
pstmt.setDouble(5,fprice);
pstmt.setDouble(6,fcommission);
pstmt.setString(7,bname);
pstmt.executeUpdate(query);
}catch (Exception e)
{System.out.println(e.getMessage());
%>
</body>
</html> Thanks!Sorry I need to hurry up. But here is link i found relating same problem. Please check this and see if it might help you.
[http://forum.java.sun.com/thread.jspa?threadID=564872&messageID=2784526|http://forum.java.sun.com/thread.jspa?threadID=564872&messageID=2784526]
Read reply #5.
It says
You're getting this exception because you're using the executeUpdate() method that returns a ResultSet. That's a JDBC 3.0 function, and the JDBC-ODBC bridge only supports JDBC 1.0.Good Luck. -
How to fix error charging is not supported with this accessory (iphone 3gs)
how to fix error charging is not supported with this accessory (iphone 3gs)?
This can mean there is some dirt, lint, or foreign material in the iPhone's dock connector port and it doesn't take much, or the dock connector port has damage with the pins or there is some moisture damage.
-
on my 3gs keep getting error message charging not supported with this accessory even when its not plugged in and i have done a restore anyone know how to fix
Clean the iPhone charging port with a clean dry toothbrush.
-
i cannot copy and paste from a document into an email body and a pop up says this feature not supported by your browser
Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Clear Cookies & Cache
* https://support.mozilla.com/en-US/kb/Template:clearCookiesCache
Clear the Network Cache
* https://support.mozilla.com/en-US/kb/How%20to%20clear%20the%20cache#w_clear-the-cache
Check and tell if its working. -
Epson SX218 doesn't print (client-error-document-format-not-supported)
Hi there,
I'm currently trying to figure out how to get my Epson Stylus SX 218 to work. Unfortunately, cups (or the printer or whatever causes my problems...) obviously just doesn't want me to get this to work.
Here's what I've done so far:
I installed everything as described in the CUPS wiki article (so ghostscript and all the foomatic-stuff is installed, usblp is NOT blacklisted, see why below)
I installed epson-inkjet-printer-workforce-sx218 from AUR
I started cups...
Nothing worked (Printer not recognized, either with or without blacklisted usblp module...)
I searched the forums for a solution
I installed cups-usblp and reinstalled all the cups stuff
Printer got recognized! Yay!
So, now the printer is set up in cups using the avasys driver. But...
It doesn't print!
When I try to print a test page via the cups webinterface it keeps telling me
Unsupported format "application/vnd.cups-banner".
The following packages are installed now:
$ pacman -Qs cups
local/cups-usblp 1.5.0-1
local/libcups 1.5.0-1
$ pacman -Qs foomatic
local/foomatic-db 1:4.0.7_20110707-1
local/foomatic-db-engine 1:4.0.7_20110707-1
local/foomatic-db-nonfree 1:4.0.7_20110707-1
local/foomatic-filters 1:4.0.7_20110707-1
$ pacman -Qs epson
local/epson-inkjet-printer-workforce-320-sx218 1.0.0-6
$ pacman -Qs ghostscript
local/ghostscript 9.04-5
Here's my cups error log:
I [01/Jan/2012:18:59:01 +0100] Listening to [v1.::1]:631 (IPv6)
I [01/Jan/2012:18:59:01 +0100] Listening to 127.0.0.1:631 (IPv4)
I [01/Jan/2012:18:59:01 +0100] Listening to /var/run/cups/cups.sock (Domain)
I [01/Jan/2012:18:59:01 +0100] Remote access is disabled.
D [01/Jan/2012:18:59:01 +0100] Added auto ServerAlias mamapc
I [01/Jan/2012:18:59:01 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
I [01/Jan/2012:18:59:01 +0100] Using default TempDir of /var/spool/cups/tmp...
I [01/Jan/2012:18:59:01 +0100] Configured for up to 100 clients.
I [01/Jan/2012:18:59:01 +0100] Allowing up to 100 client connections per host.
I [01/Jan/2012:18:59:01 +0100] Using policy "default" as the default.
D [01/Jan/2012:18:59:01 +0100] cupsdMarkDirty(---p--)
D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Not busy"
I [01/Jan/2012:18:59:01 +0100] Partial reload complete.
I [01/Jan/2012:18:59:01 +0100] Listening to [v1.::1]:631 on fd 6...
I [01/Jan/2012:18:59:01 +0100] Listening to 127.0.0.1:631 on fd 8...
I [01/Jan/2012:18:59:01 +0100] Listening to /var/run/cups/cups.sock:631 on fd 9...
I [01/Jan/2012:18:59:01 +0100] Resuming new connection processing...
D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:01 +0100] Discarding unused server-restarted event...
D [01/Jan/2012:18:59:01 +0100] cupsdAcceptClient: 13 from localhost:631 (IPv4)
D [01/Jan/2012:18:59:01 +0100] Report: clients=1
D [01/Jan/2012:18:59:01 +0100] Report: jobs=0
D [01/Jan/2012:18:59:01 +0100] Report: jobs-active=0
D [01/Jan/2012:18:59:01 +0100] Report: printers=0
D [01/Jan/2012:18:59:01 +0100] Report: printers-implicit=0
D [01/Jan/2012:18:59:01 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:18:59:01 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:18:59:01 +0100] Report: stringpool-total-bytes=5736
D [01/Jan/2012:18:59:01 +0100] PID 928 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
D [01/Jan/2012:18:59:01 +0100] cupsdReadClient: 13 GET /images/wait.gif HTTP/1.1
D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:01 +0100] cupsdAuthorize: Authorized as root using Basic
D [01/Jan/2012:18:59:01 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 13 GET /admin/?OP=redirect HTTP/1.1
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:06 +0100] cupsdAuthorize: Authorized as root using Basic
D [01/Jan/2012:18:59:06 +0100] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
D [01/Jan/2012:18:59:06 +0100] [CGI] argv[1] = "OP=redirect"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@mamapc"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/1.5.0"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[13] = "USER=root"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[16] = "IPP_PORT=631"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[17] = "AUTH_TYPE=Basic"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[18] = "LANG=de_DE.UTF8"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[22] = "SERVER_PORT=631"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[23] = "REMOTE_ADDR=127.0.0.1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[25] = "SCRIPT_NAME=/admin/"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin/"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[27] = "REMOTE_USER=root"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[29] = "HTTP_COOKIE=org.cups.sid=960956618ce3e170434dd2afacd4fad3"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[30] = "HTTP_USER_AGENT=Opera/9.80 (X11; Linux i686; U; de) Presto/2.10.229 Version/11.60"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[31] = "HTTP_REFERER=http://localhost:631/admin"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[32] = "REQUEST_METHOD=GET"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[33] = "QUERY_STRING=OP=redirect"
D [01/Jan/2012:18:59:06 +0100] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 929)
I [01/Jan/2012:18:59:06 +0100] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=929)
D [01/Jan/2012:18:59:06 +0100] cupsdSendCommand: 13 file=14
D [01/Jan/2012:18:59:06 +0100] [CGI] admin.cgi started...
D [01/Jan/2012:18:59:06 +0100] cupsdAcceptClient: 16 from localhost (Domain)
D [01/Jan/2012:18:59:06 +0100] [CGI] http=0xb9359360
D [01/Jan/2012:18:59:06 +0100] [CGI] org.cups.sid cookie is "960956618ce3e170434dd2afacd4fad3"
D [01/Jan/2012:18:59:06 +0100] [CGI] redirecting with prefix http://localhost:631!
D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 16 WAITING Closing on EOF
D [01/Jan/2012:18:59:06 +0100] cupsdCloseClient: 16
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] Script header: Location: http://localhost:631/admin
D [01/Jan/2012:18:59:06 +0100] Script header:
D [01/Jan/2012:18:59:06 +0100] cupsdAcceptClient: 16 from localhost:631 (IPv4)
D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 16 GET /admin HTTP/1.1
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] cupsdAuthorize: Authorized as root using Basic
D [01/Jan/2012:18:59:06 +0100] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@mamapc"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/1.5.0"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[13] = "USER=root"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[16] = "IPP_PORT=631"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[17] = "AUTH_TYPE=Basic"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[18] = "LANG=de_DE.UTF8"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[22] = "SERVER_PORT=631"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[23] = "REMOTE_ADDR=127.0.0.1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[25] = "SCRIPT_NAME=/admin"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[27] = "REMOTE_USER=root"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[29] = "HTTP_COOKIE=org.cups.sid=960956618ce3e170434dd2afacd4fad3"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[30] = "HTTP_USER_AGENT=Opera/9.80 (X11; Linux i686; U; de) Presto/2.10.229 Version/11.60"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[31] = "HTTP_REFERER=http://localhost:631/admin"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[32] = "REQUEST_METHOD=GET"
D [01/Jan/2012:18:59:06 +0100] [CGI] envp[33] = "QUERY_STRING="
D [01/Jan/2012:18:59:06 +0100] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 930)
I [01/Jan/2012:18:59:06 +0100] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=930)
D [01/Jan/2012:18:59:06 +0100] cupsdSendCommand: 16 file=17
D [01/Jan/2012:18:59:06 +0100] PID 929 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] [CGI] admin.cgi started...
D [01/Jan/2012:18:59:06 +0100] cupsdAcceptClient: 14 from localhost (Domain)
D [01/Jan/2012:18:59:06 +0100] [CGI] http=0xb866c360
D [01/Jan/2012:18:59:06 +0100] [CGI] org.cups.sid cookie is "960956618ce3e170434dd2afacd4fad3"
D [01/Jan/2012:18:59:06 +0100] [CGI] No form data, showing main menu...
D [01/Jan/2012:18:59:06 +0100] [CGI] /usr/share/cups/drivers/pscript5.dll: Datei oder Verzeichnis nicht gefunden
D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 14 POST / HTTP/1.1
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] cupsdAuthorize: No authentication data provided.
D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 14 1.1 Get-Subscriptions 1
D [01/Jan/2012:18:59:06 +0100] Get-Subscriptions ipp://localhost/
D [01/Jan/2012:18:59:06 +0100] Get-Subscriptions client-error-not-found: No subscriptions found.
D [01/Jan/2012:18:59:06 +0100] Returning IPP client-error-not-found for Get-Subscriptions (ipp://localhost/) from localhost
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] Script header: Content-Type: text/html;charset=utf-8
D [01/Jan/2012:18:59:06 +0100] Script header:
D [01/Jan/2012:18:59:06 +0100] cupsdReadClient: 14 WAITING Closing on EOF
D [01/Jan/2012:18:59:06 +0100] cupsdCloseClient: 14
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:06 +0100] PID 930 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
D [01/Jan/2012:18:59:06 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:11 +0100] cupsdReadClient: 13 GET / HTTP/1.1
D [01/Jan/2012:18:59:11 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:11 +0100] cupsdAuthorize: Authorized as root using Basic
D [01/Jan/2012:18:59:11 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [01/Jan/2012:18:59:11 +0100] cupsdReadClient: 13 WAITING Closing on EOF
D [01/Jan/2012:18:59:11 +0100] cupsdCloseClient: 13
D [01/Jan/2012:18:59:11 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:12 +0100] cupsdReadClient: 16 WAITING Closing on EOF
D [01/Jan/2012:18:59:12 +0100] cupsdCloseClient: 16
D [01/Jan/2012:18:59:12 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:12 +0100] cupsdAcceptClient: 13 from localhost:631 (IPv4)
D [01/Jan/2012:18:59:12 +0100] cupsdReadClient: 13 GET /admin/log/access_log? HTTP/1.1
D [01/Jan/2012:18:59:12 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [01/Jan/2012:18:59:12 +0100] cupsdAuthorize: Authorized as root using Basic
D [01/Jan/2012:18:59:12 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
I [01/Jan/2012:18:59:32 +0100] Generating printcap /etc/printcap...
D [01/Jan/2012:18:59:32 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
D [01/Jan/2012:18:59:35 +0100] cupsdAcceptClient: 14 from localhost (Domain)
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 POST / HTTP/1.1
D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [01/Jan/2012:18:59:35 +0100] cupsdAuthorize: No authentication data provided.
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 1.1 CUPS-Get-Devices 1
D [01/Jan/2012:18:59:35 +0100] CUPS-Get-Devices
D [01/Jan/2012:18:59:35 +0100] cupsdIsAuthorized: username=""
D [01/Jan/2012:18:59:35 +0100] Returning HTTP Unauthorized for CUPS-Get-Devices (no URI) from localhost
D [01/Jan/2012:18:59:35 +0100] cupsdSendHeader: 14 WWW-Authenticate: Basic realm="CUPS", trc="y"
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 WAITING Closing on EOF
D [01/Jan/2012:18:59:35 +0100] cupsdCloseClient: 14
D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [01/Jan/2012:18:59:35 +0100] cupsdAcceptClient: 14 from localhost (Domain)
D [01/Jan/2012:18:59:35 +0100] cupsdAcceptClient: 16 from localhost (Domain)
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 14 WAITING Closing on EOF
D [01/Jan/2012:18:59:35 +0100] cupsdCloseClient: 14
D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 16 POST / HTTP/1.1
D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [01/Jan/2012:18:59:35 +0100] cupsdAuthorize: Authorized as root using PeerCred
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 16 1.1 CUPS-Get-Devices 1
D [01/Jan/2012:18:59:35 +0100] CUPS-Get-Devices
D [01/Jan/2012:18:59:35 +0100] cupsdIsAuthorized: username="root"
D [01/Jan/2012:18:59:35 +0100] [CGI] argv[0] = "/usr/lib/cups/daemon/cups-deviced"
D [01/Jan/2012:18:59:35 +0100] [CGI] argv[1] = "1"
D [01/Jan/2012:18:59:35 +0100] [CGI] argv[2] = "0"
D [01/Jan/2012:18:59:35 +0100] [CGI] argv[3] = "2"
D [01/Jan/2012:18:59:35 +0100] [CGI] argv[4] = "2"
D [01/Jan/2012:18:59:35 +0100] [CGI] argv[5] = "requested-attributes=all exclude-schemes='beh','cups-pdf','bluetooth','dnssd','http','https','ipp','lpd','ncp','parallel','scsi','smb','snmp','socket'"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@mamapc"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/1.5.0"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[13] = "USER=root"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[16] = "IPP_PORT=631"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[17] = "AUTH_TYPE=PeerCred"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[18] = "LANG=en_US.UTF8"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[21] = "SERVER_NAME=localhost"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[22] = "SERVER_PORT=631"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[23] = "REMOTE_ADDR="
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[25] = "SCRIPT_NAME=/"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[27] = "REMOTE_USER=root"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[29] = "HTTP_USER_AGENT=CUPS/1.5.0"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[30] = "REQUEST_METHOD=POST"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[31] = "CONTENT_LENGTH=244"
D [01/Jan/2012:18:59:35 +0100] [CGI] envp[32] = "CONTENT_TYPE=application/ipp"
D [01/Jan/2012:18:59:35 +0100] [CGI] Started /usr/lib/cups/daemon/cups-deviced (PID 948)
I [01/Jan/2012:18:59:35 +0100] Started "/usr/lib/cups/daemon/cups-deviced" (pid=948)
D [01/Jan/2012:18:59:35 +0100] cupsdSendCommand: 16 file=14
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/mdns (PID 949)
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/usb (PID 950)
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/ipps (PID 951)
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Started backend /usr/lib/cups/backend/serial (PID 952)
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 949 (mdns) exited with no errors.
D [01/Jan/2012:18:59:35 +0100] [CGI] list_devices
D [01/Jan/2012:18:59:35 +0100] [CGI] usb_find_busses=2
D [01/Jan/2012:18:59:35 +0100] [CGI] usb_find_devices=7
D [01/Jan/2012:18:59:35 +0100] [CGI] libusb couldn't open USB device /dev/bus/usb/002/002: Permission denied.
D [01/Jan/2012:18:59:35 +0100] [CGI] libusb requires write access to USB device nodes.
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 950 (usb) exited with no errors.
D [01/Jan/2012:18:59:35 +0100] [CGI] Flushed attributes...
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Found device "ipps"...
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 951 (ipps) exited with no errors.
D [01/Jan/2012:18:59:35 +0100] Script header: Content-Type: application/ipp
D [01/Jan/2012:18:59:35 +0100] Script header:
D [01/Jan/2012:18:59:35 +0100] [CGI] Flushed attributes...
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Found device "serial:/dev/ttyS0?baud=115200"...
D [01/Jan/2012:18:59:35 +0100] [CGI] Flushed attributes...
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] Found device "serial:/dev/ttyS1?baud=115200"...
D [01/Jan/2012:18:59:35 +0100] [cups-deviced] PID 952 (serial) exited with no errors.
D [01/Jan/2012:18:59:35 +0100] PID 948 (/usr/lib/cups/daemon/cups-deviced) exited with no errors.
D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [01/Jan/2012:18:59:35 +0100] cupsdReadClient: 16 WAITING Closing on EOF
D [01/Jan/2012:18:59:35 +0100] cupsdCloseClient: 16
D [01/Jan/2012:18:59:35 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [01/Jan/2012:19:00:23 +0100] Report: clients=1
D [01/Jan/2012:19:00:23 +0100] Report: jobs=0
D [01/Jan/2012:19:00:23 +0100] Report: jobs-active=0
D [01/Jan/2012:19:00:23 +0100] Report: printers=0
D [01/Jan/2012:19:00:23 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:00:23 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:19:00:23 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:00:23 +0100] Report: stringpool-total-bytes=5736
D [01/Jan/2012:19:01:15 +0100] cupsdReadClient: 13 WAITING Closing on EOF
D [01/Jan/2012:19:01:15 +0100] cupsdCloseClient: 13
D [01/Jan/2012:19:01:15 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [01/Jan/2012:19:19:03 +0100] Report: clients=0
D [01/Jan/2012:19:19:03 +0100] Report: jobs=0
D [01/Jan/2012:19:19:03 +0100] Report: jobs-active=0
D [01/Jan/2012:19:19:03 +0100] Report: printers=0
D [01/Jan/2012:19:19:03 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:19:03 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:19:19:03 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:19:03 +0100] Report: stringpool-total-bytes=5736
D [01/Jan/2012:19:22:10 +0100] Report: clients=0
D [01/Jan/2012:19:22:11 +0100] Report: jobs=0
D [01/Jan/2012:19:22:11 +0100] Report: jobs-active=0
D [01/Jan/2012:19:22:11 +0100] Report: printers=0
D [01/Jan/2012:19:22:11 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:22:11 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:19:22:11 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:22:11 +0100] Report: stringpool-total-bytes=5736
D [01/Jan/2012:19:24:21 +0100] Report: clients=0
D [01/Jan/2012:19:24:21 +0100] Report: jobs=0
D [01/Jan/2012:19:24:21 +0100] Report: jobs-active=0
D [01/Jan/2012:19:24:21 +0100] Report: printers=0
D [01/Jan/2012:19:24:21 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:24:21 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:19:24:21 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:24:21 +0100] Report: stringpool-total-bytes=5736
D [01/Jan/2012:19:27:26 +0100] Report: clients=0
D [01/Jan/2012:19:27:26 +0100] Report: jobs=0
D [01/Jan/2012:19:27:26 +0100] Report: jobs-active=0
D [01/Jan/2012:19:27:26 +0100] Report: printers=0
D [01/Jan/2012:19:27:26 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:27:26 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:19:27:26 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:27:26 +0100] Report: stringpool-total-bytes=5736
D [01/Jan/2012:19:37:11 +0100] Report: clients=0
D [01/Jan/2012:19:37:11 +0100] Report: jobs=0
D [01/Jan/2012:19:37:11 +0100] Report: jobs-active=0
D [01/Jan/2012:19:37:11 +0100] Report: printers=0
D [01/Jan/2012:19:37:11 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:37:11 +0100] Report: stringpool-string-count=407
D [01/Jan/2012:19:37:11 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:37:11 +0100] Report: stringpool-total-bytes=5736
I [01/Jan/2012:19:37:41 +0100] Scheduler shutting down normally.
D [01/Jan/2012:19:37:41 +0100] Discarding unused server-stopped event...
I [01/Jan/2012:19:37:41 +0100] Saving job.cache...
I [01/Jan/2012:19:38:18 +0100] Listening to [v1.::1]:631 (IPv6)
I [01/Jan/2012:19:38:18 +0100] Listening to 127.0.0.1:631 (IPv4)
I [01/Jan/2012:19:38:18 +0100] Listening to /var/run/cups/cups.sock (Domain)
I [01/Jan/2012:19:38:18 +0100] Remote access is disabled.
D [01/Jan/2012:19:38:18 +0100] Added auto ServerAlias mamapc
I [01/Jan/2012:19:38:18 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
D [01/Jan/2012:19:38:18 +0100] Creating missing directory "/var/run/cups"
D [01/Jan/2012:19:38:18 +0100] Repairing ownership of "/var/run/cups"
D [01/Jan/2012:19:38:18 +0100] Repairing access permissions of "/var/run/cups"
D [01/Jan/2012:19:38:18 +0100] Creating missing directory "/var/run/cups/certs"
D [01/Jan/2012:19:38:18 +0100] Repairing ownership of "/var/run/cups/certs"
D [01/Jan/2012:19:38:18 +0100] Repairing access permissions of "/var/run/cups/certs"
I [01/Jan/2012:19:38:18 +0100] Using default TempDir of /var/spool/cups/tmp...
I [01/Jan/2012:19:38:18 +0100] Configured for up to 100 clients.
I [01/Jan/2012:19:38:18 +0100] Allowing up to 100 client connections per host.
I [01/Jan/2012:19:38:18 +0100] Using policy "default" as the default.
I [01/Jan/2012:19:38:18 +0100] Full reload is required.
I [01/Jan/2012:19:38:19 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
I [01/Jan/2012:19:38:19 +0100] Loading job cache file "/var/cache/cups/job.cache"...
I [01/Jan/2012:19:38:19 +0100] Full reload complete.
D [01/Jan/2012:19:38:19 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
I [01/Jan/2012:19:38:19 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
D [01/Jan/2012:19:38:19 +0100] Removed "/var/spool/cups/tmp/0039f4f0366a5"...
D [01/Jan/2012:19:38:19 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
I [01/Jan/2012:19:38:19 +0100] Cleaning out old files in "/var/cache/cups"...
I [01/Jan/2012:19:38:19 +0100] Listening to [v1.::1]:631 on fd 8...
I [01/Jan/2012:19:38:19 +0100] Listening to 127.0.0.1:631 on fd 9...
I [01/Jan/2012:19:38:19 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
I [01/Jan/2012:19:38:19 +0100] Resuming new connection processing...
D [01/Jan/2012:19:38:19 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [01/Jan/2012:19:38:19 +0100] Discarding unused server-started event...
D [01/Jan/2012:19:38:20 +0100] Report: clients=0
D [01/Jan/2012:19:38:20 +0100] Report: jobs=0
D [01/Jan/2012:19:38:20 +0100] Report: jobs-active=0
D [01/Jan/2012:19:38:20 +0100] Report: printers=0
D [01/Jan/2012:19:38:20 +0100] Report: printers-implicit=0
D [01/Jan/2012:19:38:20 +0100] Report: stringpool-string-count=289
D [01/Jan/2012:19:38:20 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:19:38:20 +0100] Report: stringpool-total-bytes=4792
I [01/Jan/2012:20:53:48 +0100] Scheduler shutting down normally.
D [01/Jan/2012:20:53:48 +0100] Discarding unused server-stopped event...
I [01/Jan/2012:20:53:48 +0100] Saving job.cache...
I [01/Jan/2012:20:54:26 +0100] Listening to [v1.::1]:631 (IPv6)
I [01/Jan/2012:20:54:26 +0100] Listening to 127.0.0.1:631 (IPv4)
I [01/Jan/2012:20:54:26 +0100] Listening to /var/run/cups/cups.sock (Domain)
I [01/Jan/2012:20:54:26 +0100] Remote access is disabled.
D [01/Jan/2012:20:54:26 +0100] Added auto ServerAlias mamapc
I [01/Jan/2012:20:54:26 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
D [01/Jan/2012:20:54:26 +0100] Creating missing directory "/var/run/cups"
D [01/Jan/2012:20:54:26 +0100] Repairing ownership of "/var/run/cups"
D [01/Jan/2012:20:54:26 +0100] Repairing access permissions of "/var/run/cups"
D [01/Jan/2012:20:54:26 +0100] Creating missing directory "/var/run/cups/certs"
D [01/Jan/2012:20:54:26 +0100] Repairing ownership of "/var/run/cups/certs"
D [01/Jan/2012:20:54:26 +0100] Repairing access permissions of "/var/run/cups/certs"
I [01/Jan/2012:20:54:26 +0100] Using default TempDir of /var/spool/cups/tmp...
I [01/Jan/2012:20:54:26 +0100] Configured for up to 100 clients.
I [01/Jan/2012:20:54:26 +0100] Allowing up to 100 client connections per host.
I [01/Jan/2012:20:54:26 +0100] Using policy "default" as the default.
I [01/Jan/2012:20:54:26 +0100] Full reload is required.
I [01/Jan/2012:20:54:27 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
I [01/Jan/2012:20:54:27 +0100] Loading job cache file "/var/cache/cups/job.cache"...
I [01/Jan/2012:20:54:27 +0100] Full reload complete.
D [01/Jan/2012:20:54:27 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
I [01/Jan/2012:20:54:27 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
D [01/Jan/2012:20:54:27 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
I [01/Jan/2012:20:54:27 +0100] Cleaning out old files in "/var/cache/cups"...
I [01/Jan/2012:20:54:27 +0100] Listening to [v1.::1]:631 on fd 8...
I [01/Jan/2012:20:54:27 +0100] Listening to 127.0.0.1:631 on fd 9...
I [01/Jan/2012:20:54:27 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
I [01/Jan/2012:20:54:27 +0100] Resuming new connection processing...
D [01/Jan/2012:20:54:27 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [01/Jan/2012:20:54:27 +0100] Discarding unused server-started event...
D [01/Jan/2012:20:54:28 +0100] Report: clients=0
D [01/Jan/2012:20:54:28 +0100] Report: jobs=0
D [01/Jan/2012:20:54:28 +0100] Report: jobs-active=0
D [01/Jan/2012:20:54:28 +0100] Report: printers=0
D [01/Jan/2012:20:54:28 +0100] Report: printers-implicit=0
D [01/Jan/2012:20:54:28 +0100] Report: stringpool-string-count=289
D [01/Jan/2012:20:54:28 +0100] Report: stringpool-alloc-bytes=4648
D [01/Jan/2012:20:54:28 +0100] Report: stringpool-total-bytes=4792
I [02/Jan/2012:05:34:23 +0100] Scheduler shutting down normally.
D [02/Jan/2012:05:34:24 +0100] Discarding unused server-stopped event...
I [02/Jan/2012:05:34:24 +0100] Saving job.cache...
I [02/Jan/2012:05:35:05 +0100] Listening to [v1.::1]:631 (IPv6)
I [02/Jan/2012:05:35:05 +0100] Listening to 127.0.0.1:631 (IPv4)
I [02/Jan/2012:05:35:05 +0100] Listening to /var/run/cups/cups.sock (Domain)
I [02/Jan/2012:05:35:05 +0100] Remote access is disabled.
D [02/Jan/2012:05:35:05 +0100] Added auto ServerAlias mamapc
I [02/Jan/2012:05:35:05 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
D [02/Jan/2012:05:35:05 +0100] Creating missing directory "/var/run/cups"
D [02/Jan/2012:05:35:05 +0100] Repairing ownership of "/var/run/cups"
D [02/Jan/2012:05:35:05 +0100] Repairing access permissions of "/var/run/cups"
D [02/Jan/2012:05:35:05 +0100] Creating missing directory "/var/run/cups/certs"
D [02/Jan/2012:05:35:05 +0100] Repairing ownership of "/var/run/cups/certs"
D [02/Jan/2012:05:35:05 +0100] Repairing access permissions of "/var/run/cups/certs"
I [02/Jan/2012:05:35:05 +0100] Using default TempDir of /var/spool/cups/tmp...
I [02/Jan/2012:05:35:05 +0100] Configured for up to 100 clients.
I [02/Jan/2012:05:35:05 +0100] Allowing up to 100 client connections per host.
I [02/Jan/2012:05:35:05 +0100] Using policy "default" as the default.
I [02/Jan/2012:05:35:05 +0100] Full reload is required.
I [02/Jan/2012:05:35:06 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
I [02/Jan/2012:05:35:06 +0100] Loading job cache file "/var/cache/cups/job.cache"...
I [02/Jan/2012:05:35:06 +0100] Full reload complete.
D [02/Jan/2012:05:35:06 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
I [02/Jan/2012:05:35:06 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
D [02/Jan/2012:05:35:06 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
I [02/Jan/2012:05:35:06 +0100] Cleaning out old files in "/var/cache/cups"...
I [02/Jan/2012:05:35:06 +0100] Listening to [v1.::1]:631 on fd 8...
I [02/Jan/2012:05:35:06 +0100] Listening to 127.0.0.1:631 on fd 9...
I [02/Jan/2012:05:35:06 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
I [02/Jan/2012:05:35:06 +0100] Resuming new connection processing...
D [02/Jan/2012:05:35:06 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [02/Jan/2012:05:35:06 +0100] Discarding unused server-started event...
D [02/Jan/2012:05:35:07 +0100] Report: clients=0
D [02/Jan/2012:05:35:07 +0100] Report: jobs=0
D [02/Jan/2012:05:35:07 +0100] Report: jobs-active=0
D [02/Jan/2012:05:35:07 +0100] Report: printers=0
D [02/Jan/2012:05:35:07 +0100] Report: printers-implicit=0
D [02/Jan/2012:05:35:07 +0100] Report: stringpool-string-count=289
D [02/Jan/2012:05:35:07 +0100] Report: stringpool-alloc-bytes=4648
D [02/Jan/2012:05:35:07 +0100] Report: stringpool-total-bytes=4792
I [02/Jan/2012:05:56:24 +0100] Scheduler shutting down normally.
D [02/Jan/2012:05:56:24 +0100] Discarding unused server-stopped event...
I [02/Jan/2012:05:56:24 +0100] Saving job.cache...
I [02/Jan/2012:17:22:51 +0100] Listening to [v1.::1]:631 (IPv6)
I [02/Jan/2012:17:22:51 +0100] Listening to 127.0.0.1:631 (IPv4)
I [02/Jan/2012:17:22:51 +0100] Listening to /var/run/cups/cups.sock (Domain)
I [02/Jan/2012:17:22:51 +0100] Remote access is disabled.
D [02/Jan/2012:17:22:51 +0100] Added auto ServerAlias mamapc
I [02/Jan/2012:17:22:51 +0100] Loaded configuration file "/etc/cups/cupsd.conf"
D [02/Jan/2012:17:22:51 +0100] Creating missing directory "/var/run/cups"
D [02/Jan/2012:17:22:51 +0100] Repairing ownership of "/var/run/cups"
D [02/Jan/2012:17:22:51 +0100] Repairing access permissions of "/var/run/cups"
D [02/Jan/2012:17:22:51 +0100] Creating missing directory "/var/run/cups/certs"
D [02/Jan/2012:17:22:51 +0100] Repairing ownership of "/var/run/cups/certs"
D [02/Jan/2012:17:22:51 +0100] Repairing access permissions of "/var/run/cups/certs"
I [02/Jan/2012:17:22:51 +0100] Using default TempDir of /var/spool/cups/tmp...
I [02/Jan/2012:17:22:51 +0100] Configured for up to 100 clients.
I [02/Jan/2012:17:22:51 +0100] Allowing up to 100 client connections per host.
I [02/Jan/2012:17:22:51 +0100] Using policy "default" as the default.
I [02/Jan/2012:17:22:51 +0100] Full reload is required.
I [02/Jan/2012:17:22:52 +0100] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 35 types, 42 filters...
I [02/Jan/2012:17:22:52 +0100] Loading job cache file "/var/cache/cups/job.cache"...
I [02/Jan/2012:17:22:52 +0100] Full reload complete.
D [02/Jan/2012:17:22:52 +0100] cupsdCleanFiles(path="/var/spool/cups/tmp", pattern="(null)")
I [02/Jan/2012:17:22:52 +0100] Cleaning out old files in "/var/spool/cups/tmp"...
D [02/Jan/2012:17:22:52 +0100] cupsdCleanFiles(path="/var/cache/cups", pattern="*.ipp")
I [02/Jan/2012:17:22:52 +0100] Cleaning out old files in "/var/cache/cups"...
I [02/Jan/2012:17:22:52 +0100] Listening to [v1.::1]:631 on fd 8...
I [02/Jan/2012:17:22:52 +0100] Listening to 127.0.0.1:631 on fd 9...
I [02/Jan/2012:17:22:52 +0100] Listening to /var/run/cups/cups.sock:631 on fd 10...
I [02/Jan/2012:17:22:52 +0100] Resuming new connection processing...
D [02/Jan/2012:17:22:52 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
D [02/Jan/2012:17:22:52 +0100] Discarding unused server-started event...
D [02/Jan/2012:17:22:53 +0100] Report: clients=0
D [02/Jan/2012:17:22:53 +0100] Report: jobs=0
D [02/Jan/2012:17:22:53 +0100] Report: jobs-active=0
D [02/Jan/2012:17:22:53 +0100] Report: printers=0
D [02/Jan/2012:17:22:53 +0100] Report: printers-implicit=0
D [02/Jan/2012:17:22:53 +0100] Report: stringpool-string-count=289
D [02/Jan/2012:17:22:53 +0100] Report: stringpool-alloc-bytes=4648
D [02/Jan/2012:17:22:53 +0100] Report: stringpool-total-bytes=4792
I [02/Jan/2012:18:15:27 +0100] Scheduler shutting down normally.
D [02/Jan/2012:18:15:27 +0100] Discarding unused server-stopped event...
I [02/Jan/2012:18:15:27 +0100] Saving job.cache...
E [02/Jan/2012:18:40:40 +0100] cupsdAuthorize: pam_authenticate() returned 7 (Authentication failure)!
E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:41:03 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:41:04 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:44:36 +0100] Returning HTTP Forbidden for CUPS-Delete-Printer (ipp://localhost/printers/Epson-Stylus-SX218) from localhost
E [02/Jan/2012:18:46:25 +0100] Returning IPP client-error-document-format-not-supported for Print-Job (ipp://localhost:631/printers/Epson_Stylus_SX218) from localhost
E [02/Jan/2012:18:54:25 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:54:25 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:54:25 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:54:26 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:56:58 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:58:04 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:18:58:04 +0100] Bad request line "%16%03%01" from localhost!
W [02/Jan/2012:19:01:48 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:01:49 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:01:53 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:01:53 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:01:54 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
E [02/Jan/2012:19:02:06 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:19:02:11 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:19:02:11 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:19:02:11 +0100] Bad request line "%16%03%01" from localhost!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:02:57 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:02:57 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
W [02/Jan/2012:19:03:42 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:03:42 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:03:42 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:03:43 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:04:46 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:04:46 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
E [02/Jan/2012:19:05:17 +0100] Bad request line "%16%03%01" from localhost!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:06:12 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:06:12 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
E [02/Jan/2012:19:06:57 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:19:06:58 +0100] Bad request line "%16%03%01" from localhost!
E [02/Jan/2012:19:15:57 +0100] Avahi client failed, closing client to allow a clean restart
W [02/Jan/2012:19:18:48 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:18:48 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:18:49 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Brother/BR5070DN_GPL.ppd.gz!
E [02/Jan/2012:19:19:55 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/KONICA_MINOLTA/KOC451JX.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Xerox/xrx6120pu.ppd!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp950c.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp960s.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp9100.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp880c.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp980c.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp850c.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp920c.ppd.gz!
W [02/Jan/2012:19:19:55 +0100] [CGI] Missing NickName and ModelName in /usr/share/cups/model/foomatic-db-ppds/Epson/eplp830c.ppd.gz!
E [02/Jan/2012:19:20:30 +0100] Returning IPP client-error-document-format-not-supported for Print-Job (ipp://localhost:631/printers/Epson_Stylus_SX218) from localhost
E [02/Jan/2012:19:24:03 +0100] Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/Epson_Stylus_SX218) from localhost
Please let me know if you should need other outputs, logfiles, etc. I appreciate any idea that could help me to get this damn thing to finally print something.
Thank you very much!Hi Radhakrishnan,
ORARRP doesn't actually do any printing itself. Via COM/Active-X, it calls the appropriate program that corresponds to the type of output, and then this program does the actual printing. For PDF, it calls Acrobat Reader to print the document. Acrobat Reader displays the printer dialog to let you choose which printer to use, and then when you click OK, Acrobat Reader prints the document and sends it to the printer.
I expect that you'll find that when you use Acrobat Reader yourself on this machine it has exactly the same problems with this particular printer configuration. If so, you'll need to contact Adobe for further assistance.
regards,
Stewart -
ERROR OGG-01148 programming error, data type not supported for column
I am getting following error when I put null in insert statement
2011-03-31 18:30:45 ERROR OGG-01148 programming error, data type not supported for column TXID in table advoss.tblaudittrail.
I am replicating MySQL 5.5.9 to Oracle 11g rel2 via goldengate 11I am able to diagnose what is cuasing the problem
unsigned flag was the culprit of this error
I am able to insert null after removing unsigned flag.
thank you very much for your kind support -
This Accessory Not Supported: HDMI Adapter on iPad2
When I attach my Digital AV (HDMI) adapter to my iPad, an error message appears saying "This Accessory Not Supported". Is there a problem with the adapter? Or with my iPad.
For the 4G
Try:
- Reset the dock
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
For the iPhone, try another cable. -
Hi All,
I am trying the create a seperate domain for workspace admin, which is deployed in the Weblogic server. When I try to login, I get the error "Protocol [REMOTE_JDBC] not supported".
Am I missing some configuration?
Thanks in advance.
Regards,
Manohar ChhapoliaHi,
Is this this is the first project you've deployed on an Engine you've just installed? Knowing this will help us understand if you have a problem in one of the external resources in your project or if you had a problem caused by the installation.
If this is a new Engine, did you use the installation wizard that comes with Oracle BPM 10g? How did you answer the database information for the Directory Service and the Engine? Did you allow the wizard to create a new J2EE domain or did you try to use an existing one (I struggle using the wizard using an existing domain during the installation and get a similar error when I do so)?
Thanks,
Dan -
Fatal error: Client does not support authentication protocol
requested by server; consider upgrading MySQL client in
/homepages/28/d74942468/htdocs/cosmic/sites/onlinemove/Connections/db.php
on line 9
This is the error that comes up on the server where the site
sits. The database is working on my local machine with the local
settings, but wont connect due to the above.
I think im using MySQL client 3.23 How do i upgrade?
I found this on MySQL site:
http://dev.mysql.com/doc/refman/5.0/en/old-client.html
I'm not sure how to edit the connection string to make it
accept the vaules.The_FedEx_Guy wrote:
> Fatal error: Client does not support authentication
protocol requested by
> server; consider upgrading MySQL client in
>
/homepages/28/d74942468/htdocs/cosmic/sites/onlinemove/Connections/db.php
on
> line 9
> I think im using MySQL client 3.23 How do i upgrade?
The MySQL client that the error refers to isn't the version
of MySQL,
but the MySQL library bundled with PHP. It sounds as though
your hosting
company has upgraded to MySQL 4.1 or higher, but is still
using PHP 4.
> I'm not sure how to edit the connection string to make
it accept the vaules.
You can't. It's the way that the user account passwords are
stored in
MySQL. You need to get the hosting company to upgrade to PHP
5 or to
reset the passwords in MySQL using the OLD_PASSWORD()
function. This
needs to be done by someone with top-level administrative
privileges on
the database.
David Powers, Adobe Community Expert
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/ -
Linux AMD64: Error: hotspot VM not supported
I have installed JDeveloper 10.1.3.1 on an AMD64 Linux (gentoo) as well as Sun's JDK 1.5.0.10. When I try to start jdev I get the following messages:
$ jdev
u01/oracle/product/jdev/jdev/bin
Oracle JDeveloper 10g 10.1.3.1
Copyright 1997, 2006 Oracle. All Rights Reserved
Error: hotspot VM not supported
Error: JDeveloper can't recognize the JDK version
I have found that I can make jdev start up if I edit /opt/sun-jdk-1.5.0.10/jre/lib/amd64/jvm.cfg and change the line saying:
-hotspot ERROR
to:
-hotsport IGNORE
- but according to documentation in other places I am supposed to be able to use the HotSpot VM. How do I get this to work?Have you seen this 10.1.3.1 with Fedora Core 5 and AMD 64 post? It seems to indicate that the 64 bit JVM hotspot may not work.
John -
I have a speaker with I phone 30 pin dock, it use to work fine but i am not getting error saying accessory not supported,how i can determine what could be the problem
i am getting the same error with my rf transmitter that i use in my car- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Did this start happening after an iOS update? Sometimes an iOS update will break compatibility.
Sometimes this works:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
Error -annotations are not supported in -source 1.3
Hi friends, when I try to compile my src code using ANT ,
it gives me this error :
annotations are not supported in -source 1.3 -
use -source 5 or higher to enable annotations)
@Override
^
what is source 5...? If it is a jdk version than I am using jdk 1.6.X
Plz helpANT is apparently compiling with the -source 1.3 option, meaning that the code must be compatible with java 1.3. Check the declaration of the javac ant task in your build file. It should have something like this:
<javac source="1.3" ../>remove that attribute.
Maybe you are looking for
-
Changing the default bullets insertion location closer to the left end of the document
hi friends i am new to office 2013 & i have a problem in office Word, in a documents when i click on Bullets, system insert it but the space between Bullets & left end of the document page is much for me. how can i configure Word application so that
-
How to save the USMT logs to MDT server during OSD
hi , How can i save the USMT logs ( scanstate and loadstate) to MDT server . I am using below swtiches for Scanstate and Loadstate in CS.ini. What switches i have to use to save theses logs to MDT server i.e network location. ScanStateArgs=/v:10 /o
-
Software Express for Solaris 10 04/05. Whats in it?
The title says it all, but could some one point me to a URL or tell me what's new in the currect release SE of Solaris 04/05. This is a general question, since I always have this problem to find out if it is worth downloading the monthly update, if t
-
Epson xp-410 cannot be located after upgrade, connected via usb
after upgrade to Yosemite, cannot print, looking deeper, message says printer cannot be located. It is connected via USB. I am very confused.
-
Billing issue- some items on delivery document isn't billed
Hi there. I have this issue for a delivery related billing scenario. Several items on the delivery document for the order has a billing status of "A- Not Yet Processed". I am not sure why this is happening. Could anyone please help me?