R3TR generated, changes possible in 3.5 version

Hi,
when i was trying open communication structure igot a warning message as R3TR generated, changes possible and i can see my communication structure in display mode and not in change mode , and icant able to edit my mapping .
aravindanpagadala

Hi Aravindan,
This message appears when you have transported an object to the next environment and then try to change the object again in the original system.
Check whether you have moved your communication structure from Dev to QA already. If so then use a new Transport Request to capture the communication structure. Once you have assigned it to a transport request the communication structure should be available for change.
Hope this helps.
Regards,
Amrita

Similar Messages

  • Bought photoshop elements 11 last year for windows and using it in my desktop. The desktop is crashed now and not usable. So I bought iMac now. Is it possible to trade over or change the licence into iMac version for a small fee. If not , can I partition

    bought photoshop elements 11 last year for windows and using it in my desktop. The desktop is crashed now and not usable. So I bought iMac now. Is it possible to trade over or change the licence into iMac version for a small fee. If not , can I partition the hard drive of iMac and install windows and also photoshop elements? which is the best alternative ? why?

    A Photoshop Elements license is good for both Mac and Windows so it should be just a matter of downloading the Mac version and using your current serial number to activate it.
    PSE 10, 11 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
    If you have any problem with the activation contact Adobe support using chat... Start Here  If after selecting relevant responses you are unable to find a solution, choose "Still need help? Contact us." and the chat contact option.

  • Carry out modification comparison for J_1BV45A first. No changes possible

    Hi, every expert,
    when I change the object J_1BV45A,  It appears the error as below:
    "Carry out modification comparison for J_1BV45A first. No changes possible
    Message no. EU 526
    Diagnosis
    You are trying to edit an SAP object which has already been changed or enhanced in the current system.
    A new version of this object, changed by SAP, has been imported into the system with a Release upgrade.
    The new SAP version has not been reconciled with the modified version.
    System Response
    The system will deny access in change mode or enhancement mode until the objects have been reconciled.
    Procedure
    Run the modification adjustment (SPAU) for the object. If the object is supported by the Modification Assistant, you can adjust it by clicking the stoplight."
    I don't know how to use SPAU to adjust it ?  and I donn't know where is the tab 'stoplight'.
    Anyone could help me how to resolve it ?
    Best Regards,
    Michael

    Dear Michael,
    Could you please tell us that in recent days have you upgraded patch of any SAP component in your system? Please check in your system is there any SAP Note in inconsistent status in your system. You can see the status in tcode SNOTE.
    As per suggessted by Ruchit , please take the help of ABAPers & resolve the issue.
    Let us know the status.
    Thank You.
    Kind Regards,
    Rafikul Hussain

  • MAS changes not reflecting in Baseline version

    Hi All,
    I had to do some changes to Mobile Sales application and for that in MAS I created a new project oppt (Project type: SAP Mobile Solutions and Template: Laptop Solution). I did all the changes in this new solution and they are working fine.
    I released the change list and still these changes are not updated in the baseline version.
    I see that the appropriate files {sfabol.dll (Business logic project: sfabol), opp.dll (UI Project: opp)} are updated in the oppt folder (C:\Program Files\SAP\Mobile\App.Net\oppt) but after I released the change list the files in C:\Program Files\SAP\Mobile\App.Net\MSA are not getting updated. Please correct me if I understood the release concept wrongly.
    I need to transport the changes done in oppt project to other mobile clients, please let me know how to do this.
    Your replies are highly appreciated.
    Thanks for all the help.
    Thanks,
    Chan

    Hello Chan
    Since becuase you have changed the Target Folder Path from Generation settings, all your changes are refelcted in the new location. You can find more info about the Generation @
    http://help.sap.com/saphelp_crm50/helpdata/en/74/7c023cfa699508e10000000a11402f/content.htm
    Step 1 : Please change the target folder path to standard MSA path and Save the Generation Settings. Go to Build Menu, and click on Update project Files
    Step 2 : If the changelist is still open, Do Generate Changes alone. else do a complete Generation.
    Step 3: Build the Entire solution and verify that MSA.dll and SFABOL.dll have got built successfully.
    Step 4 : Got to Mobile\Bin.Net folder and open the SAP Upgrade Console ( "UpgradeConsole.exe" ).
    Step 2 : Click on "New" in the toolbar. This will load the wizard, which shows a set of upgrade units.
    Step 3 : Select ( check ) the Upgrade Unit "Deploy UI Changes" and 'Deploy BOL Changes". Then press the 'Next' button in the wizard.
    Step 4 : In the next screen, select ( check ) the application and the languages. Then click on the 'Finish' button. The Upgrade Editor will be loaded with an upgrade containing the selections made by you.
    Step 5 : Enter a new name for this upgrade ( in the bar on the left hand side ) , and then press the "Create Package" button on the toolbar. This will popup a dialog box telling you that the upgrade package has been created in a specific location.
    Step 6 : On this dialog box, click on the "Show Folder" button. This will open a Windows Explorer window at the folder containing the package ( .mup file ) created for your upgrade.
    Step 7: Now Copy the MUP to mobile Client machine
    Step 9: Now Double click on MUP file.
    Best Regards
    Shankar

  • Is it possible to install a version of Polish?

    Is it possible to install a version of Polish?

    Yes it is.
    Steps to do so:
    Launch the Adobe Application Manager.
    On the left click on your name.
    From the context menu choose Preferences.
    Change the Language to Polski (Polish).

  • TS2518 My RAW (nikon .NEF) files changing to a dull, darker version of themselves after selecting them for the first time after import.

    My RAW (nikon .NEF) files are literally changing to a dull, darker version of themselves after selecting them for the first time after import. I.e. The correct photo (light/color/etc) seems to be there and then a second later the photo changes. It's almost like it's showing a quick enhanced version then back to basic raw image. Started within last two updates.
    Is there a fix or is this the straw that forces a switch to Lightroom?

    Just recall that Aperture (or any other 3rd party raw converter) has NO information about the JPEG preview and how it was made.  That information is camera-vendor proprietary.
    Also note that there are like 6 "picture styles" in camera and this change you're seeing is entirely dependent on how you have them set.  If you have your camera set to "vivid" or something you'll see more of a change than if your on-camera is set to "faithful."
    That said, people here ALSO complain that Aperture's initial renders are TOO vivid, the exact opposite of your complaint, so you can't please everybody (in some cases, it seems you can't please ANYBODY ;-)
    Aperture provides a starting point.  Again, if you don't like it, you can tell Aperture to go with a "punchier" interpretation at its first render.  In the import dialog, try setting Aperture to use the "auto enhance" preset which is built in.  Aperture will add a little vibrancy adjustment, and it will add a curve, which will greatly add punch to the image.  If you want adjustments in a different direction, you can create a preset and set it at import.
    The only thing Aperture CANNOT do is what you're asking, which is "take the JPEG that my camera vendor generates through some voodoo and try and render the raw file just like that."  It's, unfortunately, impossible to do.

  • Generate change documents for characteristic value changes in material master

    Hello,
    I am currently using material class (class type: 001) and assign some characteristics to material master. I am going to create a query/custom report to track all changes in the characteristic values in that material master. However, I could not find any change document in CDHDR table.
    I have activated "Change Docs" parameter in class type 001 customizing as described in SAP note: 65124 Classification Change Documents as follow:
    Is it possible to generate change documents for characteristic values in material master?
    Regards,
    Julian

    Hi Rajen,
    Thanks for your reply. It seems that I missed one more step in the customizing. Once the multiple object is activated, I need to activate the change document parameter for each assigned object.
    Thread closed.
    Regards,
    Julian

  • Multiple usage of Source System is not possible with installed DMIS version on source

    Hello folks!
    I`ve got a problem trying to adjust the Data Replication to SAP BW (on HANA) using SAP LT Replication Server.
    I`ve deleted one connection and after that I`m trying to create new one through  Configuration & Monitoring Dashboard (transaction LTR) with the same source / target systems.
    As result when on the second step (Specify Source System) I specify RFC destination of the source system it appears an error with text
    "Multiple usage of Source System is not possible with installed DMIS version on source".
    But there`s no any adjusted connection in system now..
    Please, help me to understand  how to fix that problem, I can`t find a solution

    Hi,
    When you say that you 'deleted one connection', did you delete the RFC connection or the SLT Configuration? If it is not a real multiple usage scenario, then deactivate the 'allow multiple usage' flag, else install the correct DMIS version on both SLT and source.
    Thanks
    kris

  • Is it possible to have two versions of Muse on one Machine?  WhenI open Muse from my program menu in WIndows 7 it comes up the way I am used to.  I did an upgrade a week or so ago and now I have an Adobe Muse CC 2014 on my desktop.  WhenI open the applica

    Is it possible to have two versions of Muse on one Machine?  WhenI open Muse from my program menu in WIndows 7 it comes up the way I am used to.  I did an upgrade a week or so ago and now I have an Adobe Muse CC 2014 on my desktop.  WhenI open the application that way the GUI interface looksw totally different, more like Illustrator.  What is that all about?

    Since posting the above, I have resolved a sensible work-around in regard to ebookstores which prefer us to have separate accounts for our separate Adobe IDs.
    However, I really would appreciate it if anyone here can confirm that a DRM controlled book does actually become associated with a particular Adobe ID account at the time of first download to Digital Editions on that PC/device.
    Two large book stores have said using my account with them to download books to our two separate Adobe IDs is OK, but I don't want to find my husband is unable to open his downloaded books.
    Thank you folks for any advice you can give,
    Sue

  • I own CS6. I just built a new computer with Win-7. How do I change to the 64 bit version and install on the new computer?

    I own CS6. I just built a new computer with Win-7. How do I change to the 64 bit version and install on the new computer?
    Lance

    download the installation file(s) and activate with your serial number,
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
    window using the Lightroom 3 link to see those 'Important Instructions'.<

  • Why can't i use the old remote control to change slides in the latest version

    why can't i use the old remote control to change slides in the latest version of keynote

    It would help to know what remote control your talking about, there are hundreds out there.

  • I want to buy Adobe Creative Suite 6 Master Collection Chinese version,but Flash Builder is English version in it, May I change this software to Chinese version?

    I want to buy Adobe Creative Suite 6 Master Collection Chinese version,but Flash Builder is English version in it, May I change this software to Chinese version?

    There is no reason to do that. You can buy a legitimate copy of the product from Adobe.
    If the price is too good to be true, it's too good to be true. Caveat emptor.

  • How do I update the browser on the MacBookPro?  I would like to get newer version of Safari; however, if that is not possible, is there a version of anything that I can get for MAC OS 10.5.8?

    How do I update the browser on the MacBookPro?  I would like to get newer version of Safari; however, if that is not possible, is there a version of anything that I can get for MAC OS 10.5.8?

    Hi kwalker08865,
    It would appear that the most recent version of Safari that is compatible with OS X 10.5.8 would be Safari 5.0.6. If this would meet your needs, you can find more information and a download link on the following page:
    Safari 5.0.6 for Leopard
    Regards,
    - Brenden

  • Generate Change Pointers in non Original System

    I have developped in the inbound badis a trigger to generate the change pointers in a non-original system.
    Do you know if there is a standard way to generate change pointers in a non-original system?
    Landscape is as follow:
    Original System => Intermediate System => Final System
    I would like to generate change pointers in the Intermediate System to transfer master data into the Final System...

    Hi,
      Thanks for your reply.
      the configuration for change pointers is already done, the problem is that if changes are send from the original system, it doesn't generate a change pointer in the intermediate system.
      In the end, the intermediate system doesn't send the information to the final system as there are no change pointers generated by the changes received from the original system.
      What I'm doing at the moment is to generate those change pointers in the inbound badi in the intermadiate system, I'm wondering if there is not a standard solution for this kind of implementation.
    Cheers,
    Lucien.

  • Modification Comparison - No Changes Possible

    Hi,
    I have a program which has been modified (SAPLRSM1) with the implementation of a SAP note 987566.  This has made a change which has appended two parameters to an include, which is giving a syntax error.
    SAP Note 990672 looks to fix the problem by removing one of the parameters, but I cannot implement this note as it seems to be obsolete, and has the status Implementation Status: Cannot be implemented .
    I know exactly where the error is in the code and in the short term want to comment out the parameter which is giving me an issue, but when I go to change the include, I get the message:
    Carry out modification comparison for CPUB CL_RSCRT_RDA_TOOLS first. No changes possible
    I have ran the modification comparison, but I do not get any further options.
    Could somebody tell me where I am going worng and whether it is possible for me to make this change in this way.
    We have SAP helping with some work which we are doing on our new 2004's box, but I need to get this part working urgently.
    Thanks
    DJL

    Dear Michael,
    Could you please tell us that in recent days have you upgraded patch of any SAP component in your system? Please check in your system is there any SAP Note in inconsistent status in your system. You can see the status in tcode SNOTE.
    As per suggessted by Ruchit , please take the help of ABAPers & resolve the issue.
    Let us know the status.
    Thank You.
    Kind Regards,
    Rafikul Hussain

Maybe you are looking for

  • Error while saving the same model in the

    Hi, I have created a model in one package and deleted the model due to some problem.Now i have created the same model but in the different package.Now,in the default webdynpro generated code i am getting errors. Can any one provide solution. Thanks i

  • How Do I "Sort" by "User Order" ?

    Seems to me I knew how to do this yesterday... but today? Not so much. I have imported a slew of photos and at the moment they are appearing in the Library in their capture order. I would like to rearrange a couple of them. It seems to me that the la

  • Can I purchase a power adapter for the Iphone 5 at a retail store????

    Can i purchase a power adapter for the iphone 5 at an apple store??? Mine was stolen from my car ------ arrrrrggggghhhhhhhhhhh

  • How to compile and execute procedure from hr to scott

    Hi all , I am trying to compile and execute a stored procedure from hr user to scott user. first i gave grant command to hr. By using:- grant create any procedure to hr; After i compile a procedure from hr to scott. create or replace procedure scott.

  • Precise Time

    Hello! We need to get from ORACLE 9.1 on Windows the current time up to the milliseconds through the ODBC function NOW() . (We get it only rounded up to seconds). The driver uses SYSDATE. Is there any possibility to tell the driver to use another exp