R42520 Pick Slip Print

I am having difficultly using the XML output from the P42520 Pick Slip Print UBE to generate a BIP form. The XML output doesn't have multiple indentations for internal for each processing. Has any one used the raw XML without modifying it for multiple levels?

The only way I could get this to work was to modify the R42520 to add the pick slip to the header.
I played around with it for a while, but gave up. I'd just go for modifying the R42520.....
But if anyone has successfuly done it without modify the R42520 I'd like to hear how they did it!
Jackie

Similar Messages

Pick slip print issue

Hi
Weight / Volume not reflecting correctly in Pickslips ?However in Material (MARA table) its showing correct..
Plz guide me..
thanks in advance
mahesh

i want to give some input
Only data is updating into MARA..
while Scheduling agreement created long day back with those material..
Now wtever the input is there in Scheduling agrrement doc the same value is updating into replenishment delivery like gross wt, net wt, and volume..
so plz help me wt shud be done for updation of rectified mater data updation into scheduling agreement docs..
be Scheduling aggrenebt docs ahve n no. of material..
process flow is : ME31L-VL04
thanks
mahesh

Only one pick slip copy prints despite copy count = 2

I am at a loss on this one and am hoping some of you might have seen this issue.
We have our pick slips printing to a network printer and the copy count is set to 2 in the concurrent management details, but when it prints, only 1 copy prints to the printer. We have tried two different printers and this only started happening since we upgraded our servers from Windows to Linux.
Any ideas?
thanks!
Rob

Hi Luko -
I did change this profile option - although they were already manually setting it to 2. It still only prints 1 copy. I have found that if I change the driver in CUPS it affects the number of copies:
HP LaserJet Series PCL 4/5, 1.3 - prints TWO copies but the sides are cut off
HP LaserJet Series PCL 6 CUPS - prints ONE copy with correct formatting.
Do you know why this might be?
thanks!
Rob

Pick Slip Report

We defined "delivery" as our pick slip grouping rule. We have Sales Orders that contain multiple lines going to the same ship to location. However, the pick slip report prints multiple pages with only one line per page.
Oracle Support told us that Rel 11i uses stock locator as one of its grouping criteria. This is in the code. Most customers define stock locators to store inventory of one item and certainly not every item. Therefore, there is a one to one relationship between an item and its stock locator. Given this, how do other OM customers print pick slips that contain more than one item/line per page?
Oracle Support claims that can't be done unless the items all reference the same stock locator. I find this hard to believe.
Thank you!
Roger

Hi,
i have checked the output format is only text.
but this was working without erroe for the past 3 months and no configration have changed but suddenly all 3 reports running in error and in log file no error messages comming

Show PTO BOM item price on pick slip report

We're an EBS 11.5.10.2 install, and I've created a Kit (PTO Item)-style BOM and am able to successfully order/pick/pack/ship my kit.
I've also set the profile option to explode the BOM on order Entry (rather than on Book) so I can see the components.
We have a customized XML-based Pick Slip Report that shows line pricing that our shipping dept uses to determine freight insurance value.
My problem is that only the top level item (the kit) has a price on it (even though the individual components have pricing, they come into the order as 0.00 when they are part of the kit) and only the components print on the pick slip, thus showing a zero dollar amount on the pick slip report.
Does anyone know of a way to have the individual component pricing come over to the pick slip or, even better, to show in the order lines themselves? (I may want to adjust pricing at the component level).
Thanks in advance,
Andy

actual query gives the items which are picked from wsh_delivery_details wdd, oe_orders_lines_all oola....
<G_PICK_SLIP_NUMBER>
<SOURCE_LINE_NUMBER>1.1</SOURCE_LINE_NUMBER>
<ORDERED_ITEM>SS</ORDERED_ITEM>
</G_PICK_SLIP_NUMBER>
<G_PICK_SLIP_NUMBER>
<SOURCE_LINE_NUMBER>2.1..1</SOURCE_LINE_NUMBER>
<ORDERED_ITEM>XX1</ORDERED_ITEM>
</G_PICK_SLIP_NUMBER>
<G_PICK_SLIP_NUMBER>
<SOURCE_LINE_NUMBER>2.1..2</SOURCE_LINE_NUMBER>
<ORDERED_ITEM>XX2</ORDERED_ITEM>
</G_PICK_SLIP_NUMBER>
i added a query to get the parent item, which I can get only from oola since the parent item did not have the record in wdd
<G_SOURCE_HEADER_ID4>
<SOURCE_LINE_NUMBER1>2.1</SOURCE_LINE_NUMBER1>
<ORDERED_ITEM4>XX</ORDERED_ITEM4>
</G_SOURCE_HEADER_ID4>
in the template i am using the following xml tag
<?for-each:G_PICK_SLIP_NUMBER?><?sort:SOURCE_LINE_NUMBER;'ascending';data-type='text'?>
which gives
1.1 ss
2.1.1 xx1
2.1.2 xx2
where as i am looking for the following output
1.1 ss
2.1 xx
2.1.1 xx1
2.1.2 xx2
i hope this explains my issue. Thanks
zoom_ride
zoom_ride

PICK SLIP STD FORM

Hi, in OPK8 t-code under forms, there is no LK01 list and where as in under print program, there is print program for LK01. LK01 list is for pick slip. How to find std sap script for pick slip? where to set the relation between form and print program in config? pls help.

Dear,
In OPK8 Select LK01 Program is PPPRMBRL and Form is PSFC_PICK-LIST.
You can copy it from client 000 by SE71.
Go to CO04N or CO0N transaction to print your component list.
On menu Click on print ,now you can see print settings, print>>print settings >> List control
select the required list you want to print.
Regards,
R.Brahmankar

Pick Slip report gives 'No Data Found' output

Hi All,
Problem Statement:
Iam unable to generate Pick release report, the shipping
lines status is "ready to release" and we have a available quantity for the shipment.
Step1 : Create a Order.
Step2 : Save and Book the Order.
Step3 : Pick Release the Order.
Step4 : Go To " View My Requests".
Step5 : Select the Request Id " Pick Slip Report "
Step6 : Click on Output.
Result " No Data Found.
Thanks in Advance
SYR

Hi SYR,
Pick Slip report gives you out put as NO DATA FOUND, is basically, bcos there has not been any picking of the item, reason may be,
1. Qty avaialble wont be reservable and transactable
Check in Inventory> On handqty > click availibility tab
And see whether the item is available to transact & reserve.
If you have enought qty thn you shld be able to pick release tht item.
2. Check which sub inventory are you using while pick release, is it the same as where the item is kept.
Try this out.
This may help.
Thanks
Manoj

Can't print to Epson TM-U590 Slip Printer from Report Generation Toolkit with LabVIEW 8.6.1

Hi all,
I have an application that uses the Report Generation Toolkit to print tickets to a docket printer. Usually this works fine - I have 8 existing installations where there are no problems
I'm currently installing the software at a new site that uses an Epson TM-U590 slip printer and I can't for the life of me get printing to work
Using a Standard Report, the Print Report.vi returns error -41002 which indicates it can't find the printer. I've opened up the VI using remote debugging and it does find the printer name correctly with the Query Available Printers.vi. It gets an error code -2147352567 from the Printout node, which then gets replaced with the -41002 error which is reported.
For historical reasons I'm still using LabVIEW 8.6.1 for this project. I'm considering moving to 2011 or 2012 but I've had reliability issues with other parts of the application after attempting to update to a newer LabVIEW version so I'd like to avoid that at this stage.
The application is running on a standard desktop PC with Windows 7. The slip printer works fine if I print to it from Notepad, and my application is happy to print to any other printer, just not the slip printer.
The slip printer is using the LPT port. Previously the docket printers I've used have been USB but I would expect the printer driver to hide this detail from the application...
Any ideas would be much appreciated
Cheers
Brett
Senior Software Development Engineer
Certified LabVIEW Architect and LabVIEW Champion
Solved!
Go to Solution.

I've managed to sort out the problem, thanks to this KB article: http://digital.ni.com/public.nsf/allkb/67D60209102E2161862568AC0074BF64
I'm now having the same issue with a Star docket printer (a TUP592), this time with another program developed in LabVIEW 2011.
As mentioned in the article, the problem is actually to do with the margin settings rather than the printer name, despite what the error message says
After some experimentation, I've gotten the Star printer to work by setting a large (>14cm) right margin. No idea why this is required as it seems to print right up to the right edge of the paper quite happily, but there you go.
So I haven't defintely fixed the original problem yet as I haven't gotten back to the site, but hopefully this will be of some help to someone else.
Cheers
Brett
Senior Software Development Engineer
Certified LabVIEW Architect and LabVIEW Champion

How to setup the movement slip printing

Hi
Does anyone know how to setup the movement or migo slip printing? Does it need setup condition to auto trigger the output type or omj4 could setup the auto slip printing by output type +plant locaiton ?
I have setup NDR in my parameter as X, but when I test to move matieral or receipt, there is no slip be printed ..why?
Thanks
Sherry

Hi Alice,
Go to NACE Transaction in that select ME - Inventory managment and also maintain condition record, Procedure, output type, Acess sequence for output type (WE01) and u get automatically in GR..Moreover also select the printer determination by Plant/Storage location combination.....
Apart from Maintaining condition record as suggested in previous thread one more important activity is
In Migo screen on Header data section inside generaltab
just below Posting date feild you will find Printer Icon right hand side to that there is one check box, this must be checked either manually at the time of GR/GI creation or is preselected if the parameter NDR has been set to X (capital letter!) in your user master recordset. This is preselected if the parameter NDR has been set to X (capital letter!) in your user master record...
Moreover use MB90 for print outs for goods movement...
From sas...

'Move order pick slip report' Report not picking XML publisher Template.

Hi,
SUB: i have to create one XML report on .RDF(move order pick slip report).
Submitting procedure move order pick slip report : i have created one Discrete Job and released that Job, then Component pick release for that particular job. then move order number will generates. then automatically fires the 'Move Order Pick Slip' Report.
NOTE: what i meant to say is i am not submitting the report from SRS window. it will fires automatically when Component pick release.
For this i have taken .xml and generated .rtf according to my layout and i have registered with XML publisher also.it is correct . But while running the report i am geting output as XML codes not in template(wht i have .rtf) format.
if i have to see the output in template from. (i have taken in conc program output as XML also) still same problem.
please help me if anybody having solutions.
Thanks
Valli

Hi Valli,
1:The first thing i would suggest that please check the BI Publisher version you are using (on apps/and on template builder also).
2: In any case if your report is not picking up the template and generating the xml output , i suggest you to attach one program "XML Report Publisher" in your SRS.
Oncwe you run your report and its generate the xml output. you have to take the request id & from view ---> submit request--->XML Report Publisher. run this request again.
it will ask for the request id , select the appropriate request id and it will generate the pdf output as per your requirement.
But this is temporary solution , i strongly recommend you to check the updated version of BI Publisher and instaal it on your oracle apps instance. also use the updated version of bi publisher for Layout(Template Builder).
Regards
SRatnesh

Language Translation is not working for Pick slip Report (XML)

Hi All,
I have to translate the Oracle Pick slip report(XML) in other language. So I export and upload translation file for different language but still it is taking default english template. It should refer the translation file but it.s not working. Could you please suggest me if I am missing something?
Thnaks,
Joohi

Hi,
Looking for some help on this.
Thanks in advance!
Venkat

Move order pick slip report XML report not geting out put as templete

Hi,
SUB: i have to create one XML report on .RDF(move order pick slip report).
Submitting procedure move order pick slip report : i have created one Discrete Job and released that Job, then Component pick release for that particular job. then move order number will generates. then automatically fires the Move Order Pick Slip Report.
NOTE: what i meant to say is i am not submitting the report from SRS window. it will fires automatically when move order is generated.
for this i have taken .xml and generated .rtf according to my layout and i have registered with XML publisher also.it is correct . But while running the report i am getiing output as geting codes not in template(wht i have .rtf) format.
if i have to see the output in template from. (i have taken in conc program output as XML also) still same problem.
please help me if anybody having solutions.
Thanks
Venakt M

Hi,
Looking for some help on this.
Thanks in advance!
Venkat

Pick Slip Grouping

Oracle Gurus,
I have defined pick grouping rule by itemwise, as per this parameter when I release sales orders.. should be picked up by itemwise.
Example:
Order Number     Item     Qty
100001     A     200
100001     B     111
100002     A     300
100002     B     222
100003     A     400
100003     B     333
I want to release all above order at same time, as per pickslip grouping rule only by Item.... System should pick as Item A as : Qty 900 and Item B as Qty 666.
System is creating pick slip as by orderwise and itemwise, totally 6 lines created...
My client dont want to go each and every time pick the same item, its waste of time.
If they get pickslip as Group as Qty 900 - Item A and Qty 666 - Item B - Picker goto respective subinventory pick the items.
How to do this setup to achieve my requirement.
Quick responses highly appreciated.

Hi, I am trying to sort Pick slip grouping by Items however it is grayed out. Any idea, How can I make it enable?

Move order pick slip report in Oracle Application 11i

hello
I have problem with Move Order Pick Slip Report in Oracle Application 11i that in my system it is not running. when I submit this report from my system, the application halt and I have to restart application on my system.
on other computer it is running properly
Pls help me in this regard
Sadiq

Hi,
Looking for some help on this.
Thanks in advance!
Venkat

Confirmation Slip Printing

Hi ,
How do I set-up the automatic printing of the confirmation slips?
Is setting this in the Control Key enough?

Hi,
Alongwith Appropriate control key you need to maintain following settings in Customization in OPK8 :
List : LV02
List Name : Confirmation Slip
In Print Programms :
For List LV02 : Report Name PSFCCONF
In Forms :
For List LV02 : SAPScript Form is ZPPGL_STD_LAYOUT
Pls. maintain / if exists just check and verify above settings in OPK8 to carry out Confirmation Slip Printing.
Hope this helps.
Revert if any doubt and reward if useful.
Regards,
Tejas

R42520 Pick Slip Print

Similar Messages

Maybe you are looking for