R4870-T2D512 - installing the driver causes vista to stop booting

Hi,
I have a gigabyte ep45-ds4p motherboard with R4870-T2D512 video card and 4 GB ram and raid mirror 500GB HDD
I have tried the CD driver, the driver from MSI and the driver from ATI.
after installing, the PC will not boot except for safe mode.
argH!
what to do???
thanks
b

Read >>Posting Guide<<

Similar Messages

  • Turbo memory Crashes vista and windows 7 when I install the driver (any available driver)

    It goes like this .
    when I first receive my t61 there was a vista installation and turbo me worked. I downgraded to XP and then I didn't use turbomem.
    about half a year ago I tried running windows 7 beta and one of the turbo memory drivers worked but didn't operate the Readyboost or ready drive but only I was able to see the IMD-0 in the disk management so I mounted the IMD as a drive and run manually the ready boost on that drive.  
    I installed a newer version of windows 7 (Build 7600) and I tried that newer turbo mem drivers and the older drivers nothing works ! 
    When I install the driver my comp crashed because ianvstor.  That happens everytime IM trying to install the driver.
    I tried installing vista SP2 and the same thing happens.  I think my turbo mem chip is burned or something.
    I also tried to replace hard drives and it didn't works.
    it's really annoying that I have a component on the computer which I payed for it and it doesn't work.
    i really hope this forum can help me to solve the problem.
    i was going throw all the posts in google about turbo mem and none of them have my problem which I can't even install the driver.

    ZetLAW wrote:
    about half a year ago I tried running windows 7 beta and one of the turbo memory drivers worked but didn't operate the Readyboost or ready drive but only I was able to see the IMD-0 in the disk management so I mounted the IMD as a drive and run manually the ready boost on that drive.  
    I installed a newer version of windows 7 (Build 7600) and I tried that newer turbo mem drivers and the older drivers nothing works ! 
    When I install the driver my comp crashed because ianvstor.  That happens everytime IM trying to install the driver.
    I tried installing vista SP2 and the same thing happens.  I think my turbo mem chip is burned or something.
    I also tried to replace hard drives and it didn't works.
    it's really annoying that I have a component on the computer which I payed for it and it doesn't work.
    i really hope this forum can help me to solve the problem.
    Windows 7 is still in beta stages first of all, and second, Lenovo hasn't released any official drivers to work with Windows 7 yet. That will NOT happen unitl Microsoft offically releases Windows 7. 
    http://www.lenovo.com/us/en/windows7/index.html?ipromoID=wnb00492&
    I would highly recommend sticking with the OEM version of your OS to eliminate problems of this kind! You want Lenovo to help you, but you're using a non-OEM operating system on your unit. Maybe someone else here in the forum might be able to assist you.
     Do NOT PM me with technical issues. Post in the forum for assistance. Thanks

  • I am trying to install the driver for a Wacom Bamboo Pad. The dmg from Wacom downloadsand will opens, but when I try to install it the message "Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be confirmed"

    iMac late 2009 3,06GHz Intel Core Duo; 500gb hard drive, 12gb memory. OS X 10.8.5 (Mountain Lion)
    '“Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be confirmed.'
    I have been trying to install the driver for a Wacom Bamboo Pad. There are several driver packages listed on the website (the device is supplied ready to run with Windows devices) and I have tried tried downloading all the available drivers which apply to my set-up. Some will not open at all and I get a 'Damaged' message on my screen. Of the ones which open, I can download the .dmg and expand it but when clicked it opens as a window with multiple choice of languages and an icon which instructs you to click to open.
    If I do this some versions repeat the 'damaged' message but the later ones generate a window saying:-
    '“Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be confirmed.' - this is as far as I can get it to go; most frustrating!
    I understand that Apple's security updates have recently included an alteration that causes this result, and that there is supposed to be a legal (i.e. Apple sanctioned) workaround to allow files like this to be opened. If this is so, can anyone enlighten me?

    Many Thanks, Kurt.
    I knew I'd seen the solution you've provided somewhere - either in MacWorld or MacFormat - but couldn't remember the Gatekeeper bit!
    I shall save it somewhere VERY safe now in case this happens again …
    You have made an old man very happy and saved me from worrying that senile decay had suddenly set in. (I was 70 last week so you might understand the situation from that.)
    Best wishes
    OllyanDinah

  • HT1338 I have HP LaserJet 200 colorMFP M276nw and trying to install the driver on my mac pro; it gives me the error message that the driver is not available.

    Hi,
    I have HP LaserJet 200 colorMFP M276nw and trying to install the driver on my mac pro; it gives me the error message that the driver is not available.

    Typically this is caused by the internal list of compatible devices in the Mac being out of date.  All you should need to do is disconnect the printer from the Mac, run Apple Software Update (even if there are no updates, the list will still update), restart the Mac, connect the printer to the Mac, and add the print queue.  If that doesn't work, let me know.
    I am a printer tech for HP.

  • Install the Bluetooth cause blue screen

    hey, I purchase a Lugulake Bluetooth Speaker but cannot use it, When I installed Bluetooth driver cause my PC(win 7 system) blue screen.

    Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    Can't really see how this is related the phone. Could you please elaborate a bit?
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Can I set up a new Mac Pro late 2013 using a Wacom Cintique 13HD tablet as the default monitor? How would I install the driver software for the tablet?

    Can I set up a new Mac Pro late 2013 using a Wacom Cintique 13HD tablet as the default monitor? How would I install the driver software for the tablet?

    The wacom site will have the drivers for you.
    http://us.wacom.com/en/support/drivers

  • Agere Ethernet Controller (ET-131x) - unable to install the driver

    I need to install the following wired NIC:
    01:00.0 Ethernet controller: Agere Systems|ET-131x PCI-E Ethernet Controller (unknown)
    It seems that the "et131x" kernel module is necessary.
    The web site bellow gives instructions on how to install the driver from sources:
    http://dadams1969.googlepages.com/et131xkernelmodule
    Unfortunatly I am unable to do it.
    I have also tried to install the module compiled by a member at the following address:
    http://www.archlinux.org/~tom/packages/
    The module seems to be installed properly. A new folder is created in /lib/modules/
    However, I am unable to load it.
    # modprobe et131x.ko
    FATAL: Module et131x.ko not found
    #insmod et131x.ko
    insmod: error inserting 'et131x.ko': -1 Invalid module format
    Am I doing something wrong?
    NB:
    The module has been compiled for the 2.6.20 kernel and I am using 2.6.22 (i686)...
    Last edited by sylvain77 (2007-09-26 08:23:48)

    Heh... I had competely forgotten that I had done that, so now I feel morally obliged to help you.
    I just tried a rebuild against 2.6.22 and it failed, but after a little digging around, I found a patch, and now it builds. I can't tell you if it works or not, as I don't have the hardware.
    Get the new package in the same place as before, and let me know how it goes.
    It's worth noting that this code is 6 months old at this stage, and the project doesn't seem to be very active. There's one 4-mail thread about it on lkml.org, with no indication that this will ever be merged to mainline.

  • I have a g4 running os10.4.11, i bought a epson workforce 1100 and tried to set it up but there is not a listing for it when i try to add it before installing the driver software from the supplied cd...anyone know what i can do to get it set up?

    i have a g4 running os10.4.11, i bought a epson workforce 1100 and tried to set it up but there is not a listing for it when i try to add it before installing the driver software from the supplied cd...anyone know what i can do to get it set up?

    Load the drivers and you should then be able to add it in Print Center.

  • I have an early 2008 iMac running iOs 10.5.8. I need to upgrade to at least iOs 10.6 snow leopard in order to install the driver for a new HP Office Jet Pro 8610 printer. How do I go about doing this, and which version of 10.6 would be best?

    I have an early 2008 iMac running iOs 10.5.8.It has a 2.8 Ghz Intel Core 2 Duo. I need to upgrade to at least iOs 10.6 Snow Leopard in order to install the driver for a new HP OfficeJetPro 8610 printer. Which version of 10.6 would be the best for this Mac and how do I go about upgrading?

    Click here and buy the DVD.
    (115929)

  • I installed the driver for my hp t1300 and when i print, it opens my webbrowser

    I recently installed the driver for my T1300. When I try to print from AutoCAD 2013, it opens a web browser and puts my print in the que on HOLD. Please tell me how to stop this from happening. 

    Hi Lazyadt,
    The Designjet is a commercial product.   I am linking you to the Designjet forums repost your question for better coverage.
    Designjet Forum

  • I recently bought an Epson Artisan 837 printer. I installed the driver and now Photoshop from CS3 will not open. It quits when the Twain portion of the program starts loading. Does anyone know how to fix this so my printer will work with Photoshop??

    I recently bought an Epson Artisan 837 printer. I installed the driver and now Photoshop from CS3 will not open. It closes every time it gets to the point where it is loading the Twain portion. Does anyone know how to fix this so my printer and Photoshop will work together? Thanks for any help I can get!

    You're welcome. 
    But, no, don't look to  Epson for fixes to their  driver in newer versions, and Adobe has deprecated the TWAIN plug-in.  Hoping for a solution there is futile.  That has not happened and it's never going to happen.  The consensus is that it's pretty foolish to tie up Photoshop to scan.  Honestly.
    Any improvement in the behavior of newer versions of the Epson drivers in that regard would be pure coincidence.
    You need to understand that you never, ever scan "within" Photoshop, as Photoshop has no scanning capabilities whatsoever.  When you use the Import > Twain plug-in all you are doing is blocking Photoshop while you call up the stand-alone Epson scanning software.  If you think about it, its most inefficient.
    VueScan has a pretty powerful scanning plug-in that can be called from the Impost menu—if you insist.  VueScan is not free, but it's a pretty good value, IMO.
    As for the Epson CD printing software, I have no clue.  Sorry. 

  • Os 10.7.5; problems to install the driver for Officejet Pro 8600

    I have just bougt the Officejet Pro 8600. First I tried the installation disc at the reply was that I had to conntact HP to get the latest installation version. So I did. Downloaded for the HP homepage at got the driver. When installing I got the same answer: get the latest version.  Any suggestion so I could connect my iMac to the new printer?

    Hi Heistein,
    Welcome to the HP Forums.
    I understand you are having trouble with installing the driver. 
    I would recommend to take a look through this guide. An 'Unsupported Operating System' Message Displays on a Mac Running OS X 10.7 Lion.
    Hope this information helps, and have a great day.
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Officejet 4500 wireless printer keep geeting error message when installing the driver

    hi can anyone help im trying to install my officejet printer 4500 g510 n-z driver from the hp website  and i keep getting an error message and i have no idea how to stop getting this message as i have tried a few times to install the drive and keep gettimg the same message  im running windows 8.1 if tht helps
    thanks john

    Hello jono13,
    Welcome to the HP Forums!
    I understand you're receiving an error message when installing the Officejet 4500 software. What is the exact error message on your computer? Could you send a screen shot of your exact error?
    How will you be connecting this printer? Wireless or USB?
    Please verify this information and I will assist you further.
    Looking forward to hearing from you.
    I worked on behalf of HP.

  • Why Do I Get Error 1722 When Installing the Driver CD with Windows XP?

    I'm having problem to install the driver CD, it shows a message saying that occured an error 1722
    A tried to do what you said on this topic: http://digital.ni.com/public.nsf/websearch/34ABE6F20DD4981D86256E8600752DFE?OpenDocument
    But on step 10, when a I tried to Select the property "Replace permission entries on all child objects with entries shown here that apply to child objects" and aply, the PC showed an error saying that de Registry Editor cannot define the security of that key selected or one of its sub-keys.
    I tried to install after this and showed de 1722 error's message again.
    Solved!
    Go to Solution.

    Have you also tried disabling the anti virus?

  • Pnputil - failed to install the driver

    Hi,
    I run cmd as admin, windows account is too admin, directory is OK, but I still can not install driver (for StarSign CUT device). Driver is official, and if I install driver in Explorer, everything is OK. 
    Windows 8.1 64bit, last upadate. HP 350 G1. On the another two PCs, everything runs good. Do anybody have some tips for solve this problem? Thank you.
    D:\driver>pnputil -i -a SZCCID.INF
    Microsoft PnP Utility
    Processing inf :            SZCCID.INF
    Failed to install the driver on any of the devices on the system : No more data are avalaible
    Total attempted:              1
    Number successfully imported: 0

    Hi Ding27,
    What is the commands used on the other two PCs? Why not take use of Device Manager to install the proper drivers?
    It seems to be a little problem when using the pnputil command.
    You may take a try with the following:
    pnputil /a /i  <file path/inf file name>
    Reference:
    PnPUtil Command Syntax
    PnPUtil Examples
    Best regards
    Michael Shao
    TechNet Community Support

Maybe you are looking for

  • How do I manually log device out of iCloud/Safari?

    I had an iPhone 5 and bought an iPhone 6 - I set up my iPhone 6 as a brand-new device and then I logged out of iCloud on my iPhone 5 and then erased and reset all settings.. But in Safari on all my devices I can still see my current Safari position f

  • YYYY/MM/DDT00:00:00

    I have input parameter with format : YYYY/MM/DDT00:00:00 I would like to convert this into format: DD-MM-YYYY I'm using: <?xdofx:to_char(to_date(substr($P_START_DATE,1,10),'YYYY/MM/DD'),'DD-MM-YYYY')?> It returns as 2007/06/18. Any ideas. Message was

  • Info about laptop

    Hello, can you help learn more info about laptop model dv6t? Thank you!

  • Theme editor: Portal Runtime Error

    We've installed EP 7.0, when trying to access the theme editor, the following exception occured. The Theme transporter got no problem. Thanks. Weiming. An exception occurred while processing a request for : iView : pcd:portal_content/administrator/su

  • Download not working: requested page not found

    see the subject