R6025 error when inporting sequences.

Hello All,
I was wondering if someone has insight as to what could be causing a "r6025 - pure vital function call" error. I have been having this problem on
and off for a while now. I see alot of others have had/are having this error and I have already searched through the forums and tried finding a
solution before posting here.
I have not seen any specifc references to the error in relation to my workflow when I receive it.
Before moving forward, here are my system specs.
Operating System:
    MS Windows Vista Home Premium 64-bit SP2 (Bag of shame over head :0)~ )
CPU
    Intel Core 2 Quad Q6700  @ 2.66GHz    37 °C
    Kentsfield 65nm Technology
RAM
    8.0GB Dual-Channel DDR2 @ 332MHz (5-5-5-15)
Motherboard
    ASUSTeK Computer INC. P5QL PRO (LGA775)    31 °C
Graphics
    HP w2408 (1920x1200@60Hz)
    512MB GeForce 9400 GT (MSI)    39 °C
Hard Drives
    488GB Western Digital WDC WD5000AAKS-00H2B0 ATA Device (SATA)    33 °C
Optical Drives
    WD Virtual CD 1110 USB Device
    ATAPI iHAS120   6 ATA Device
Audio
    Realtek High Definition Audio
Premiere Pro: CS4 4.2.1
Ok, here's what happening:
The only time I receive the above mentioned error is when I have a project open and I choose to import selceted sequences from another PP project
file. If I choose to import a single sequence it pulls everything in fine, if however I choose multiple sequences I receive the error.
The weird thing is that it is not a consistent error. For example, if I have a relativelty small project with just a handful of clips and
sequences I notice that I am able to import multiple sequences from another PP project without issue. If I have a larger project with many
sequences and assets, say maybe 50 sequences, 70-100 footage files, etc., and I proceed to import more than one sequence from another PP project I
receive the error.
I was originally thinking maybe PP is just choking as it is only accessing 4GB ram? Maybe the processor is not beefy enough? I don't think it is a
software conflict as I only have some piriform products such a CCleaner, etc and Globalscape's CuteFTP installed. I use my system strictly for
media creation like mostly everone here and do not and download the typical junk you see on most "home" systems.
If there is a quick fix great, if not it's ok I will continue to deal with it but then my main question would be when I upgrade to 5.5 and Win 7
Pro do you think this issue might be resolved ?
Thank you in advance to anyone who may have any insight into this issue,
Shane

Jim,
Thanks for the response. I downloaded the PP 5.5 trial and all I can say is WOW! The problem I was inquiring has been resolved. I can't believe the performance difference. As you can see by my specs above my pc is adequate but by no means stellar. Not only was I able to open the large project files and import multiple sequences, but I tried to get PP to choke and couldn't.
The start up time difference on my system is amazing as well. As good as CS4 is/was, 5.5 makes it look stupid.
I do have one question which I think I kno wthe answer to but just want to double check.
When I downloaded the PP 5.5 trial I installed it that started opening up some CS4 project files. When it was converting them, some of the project files based on the filter I used received the following message:
"Video Filter missing:  AE.SA ColorCorrect"
I figured this was because I didn't install AE 5.5. I downloaded the trial and still the same thing. I am assuming because this is a filter not included with the trial of AE. When I purchase MC 5.5 next month and do a clean install (wiing drive and installing Win 7 Pro) would I be correct in assuming this should be resolved? If not is this an old filter that has been updatd by a newer one?

Similar Messages

  • Error when creating Sequence inside a stored procedure

    I tried to drop a sequence and then re-create it with new starting number in a pl/sql procedure by using 'execute immediate' command.
    However, I got the 'ORA-01031: insufficient privileges' error when I actually executed the procedure.
    I was able to create the sequence directly from SQL*Plus prompt. So, I believe I have the sufficient privilege to create sequence.
    Why it's not working when it's in a procedure?
    Please advise. Thanks!

    I'm not mean at all. You asked a redundant question, and you didn't research it or for less than 1 minute.
    Doing so you add to the clutter, and contribute to turning this forum in a chatroom (which it isn't ) and to a place of garbage
    (which it is thanks to you and thousands of other DBAs who never consult documentation before asking a question)
    That's just the truth. I can't help it you can't bear to hear the truth. That is a problem with you, not with me.
    I am in forums like this one for over 15 years. Over the years I have seen more and more people who don't want to learn to fish.
    And as things are getting worser and worser: yes, it annoys me.
    And I did anwer the question, didn't I. Frankly, all over the globe real DBAs are tearing their hair out (provided they still have it) because of the sort of 'applications' you and your colleagues develop.
    They are a disaster.
    Sybrand Bakker
    Senior Oracle DBA

  • Dynamic Link Error when sending sequence to AME

    Hi,
    I have a very short sequence without errors in premiere pro, but when I drag the project over to Adobe Media Encoder, I get a "Dynamic Link Error"...
    "There was an error when adding selected sequence to the batch".
    Any ideas on how I can fix this?  Currently I have to export sequences one at a time, and that's not going to be cool in the near future.
    Premiere pro 6.0.5
    Adobe media encoder 6.0.1.31
    ---Trav

    Have you tried Queuing from PP instead of dragging?

  • Windows error when exporting sequence to movie

    I have a project (Adobe Premiere CS3 - Matrox RT.X2 LE card - Windows XP SP3) with several sequences. I have exported to movie almost all the sequences without problems. But there´s one sequence that when I try to export, when rendering (compiling process), suddenly pop´s up a Windows error saying the program encoutered a problem and will be shut down.
    I cannot figure out why is this happening. Any help?

    This ARTICLE might help you gather some "clues," as to what is happening, when PrPro shuts down.
    However, I feel that Harm has the answer with the Matrox card.
    Good luck,
    Hunt

  • R6025 error when I start AA3

    I downloaded the free trial to test out this program and see if it is worth buying for me. I installed it and everything. When I started the program it told me this was a trial and I click ok. The next pop up says that it works better if it has its own temp folder or something, and do i want to use this folder, so i say yes. It starts to load and as soon as it opens a pop up comes up saying "Shutting Down: To continue working where you left off, please restart Audition" Then it gives me an error. "Runtime Error R6025 - pure virtual function call" It also gives the location of the file C:/programfiles/adobe/audition/auditon.exe
    I have tried solutions that I have found online such as:
    uninstall QuickTime
    clear out %appdata%\Adobe\Audition\3.0
    Remove (or rename) C:\Program Files (x86)\Adobe\Adobe Audition 3.0\en_us\ImporterQT.prm
    None of these worked for me, I also saw one about a clean reinstall of windows, I don't wanna go through that and I don't think it's worth that. Can anybody help me out?
    I am using vista if that helps.

    I get the restart Audition problem once in a while on my laptop and have
    always been able to fix it by reinstalling the 3.0.1 patch, renaming my
    C:\documents and settings\(my userid)\application data\adobe\audition\3.0
    folder then restarting my computer.
    Sometimes I don't have to rename the folder... sometimes I can move the original
    folder back and AA still works with my previous settings.
    This has happened to me about 3 times.
    The patch is here:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4237
    PS. I'm running XPsp3.  I can't recall if this has happened on my recording server.
    If it has, it's not more than once.

  • BW error:  "invalid call sequence for interface when recording changes"

    I am getting the error "invalid call sequence for interface when recording changes" when I try to activate a datasource in BW.  Any ideas on how to resolve this error?
    Thanks.

    I already tried that.  This is what's happening..  When I get this error, if I try again it will activate and gets collected into a transport.  I moved this transport to our QA system.  As soon as I try to execute an infopackage under this datasource in QA, I get the error datasource   xxxxx must be activated.   Before the excecution of the infopackage, the datasource is in "Active version executable".   After I get the error message "datasource must be activated", the datasource in the QA system changes to "Active version not executable".   I am not sure all these issues are related back to the "invalid call sequence" error I am getting when I try to activate the data source.
    I also tried recollecting the transport from our Dev system to QA and it still gives the above errors.
    Any help?
    Thanks.

  • R6025 Runtime Error when starting Photoshop Elements Organizer 12

    I installed Photoshop Elements 12 a couple of weeks ago.  When I run the Photo Editor, everything is fine.  But when I try to run the Organizer, I get the Microsoft Visuall C++ Runtime Library dialog that specifies a Runtime Error! for Program: C:\Program Files (x86)... with error code R6025 - pure virtual function call. 
    My PC is a 64bit Windows 7 Machine with SP1.
    Any ideas?
    Thanks.

    I tried the first solution listed and that did not help.  Part of the 2nd solution was to create a new user on the PC and uninstall/reinstall the software using the new user account.  I did this and I no longer get the R6025 error.  Now I get a R6034 error when I open the Organizer. 
    Any ideas on the R6034 error?

  • Why I get an error when running a sequence using the LabVIEW operator interface ?

    I have a simple TestStand sequence calling LabVIEW vis that is giving me an error when I run it with the .exe version of the LabVIEW operator interface and I set TestStand to run the vis using the 8.2.1 runtime engine instead of the development adapter. I made a change in the operator interface to open a vi programatically and get the value of a control, this vi is also used in the TestStand sequence I am trying to run. Could this be causing my problem ?
    Thanks

    Hello Verdulken,
    I have a few additional questions:
    Does your application function correctly when running the LabVIEW operator interface you have created as a VI in the LabVIEW development environment (i.e. does this problem only occur when the LabVIEW operator interface is run as an executable)?
    What is the error that you are receiving?
    Regarding the VI that you open programmatically, do you open it in a visible manner (i.e. use the Show front panel when called option from VI Properties)?If so, do you also close this VI after it finishes (i.e. use the Close if originally closed option from VI Properties)?
    Does the error occur on the step that calls this very same VI again later in the sequence?
    Does your application function correctly if you use the development adapter for all of your calls?
    Thank you in advance for this information,
    Matt G.
    National Instruments
    Applications Engineering

  • Sequence stopped on user interface when a sequence error happens on a step. Is possible to change this?

    I'd like to know if when developing an user interface over TS using MFC, if a sequence error occurs, I get an error on the user interface and the sequence stops without giving any other option. Is possible to continue the sequence, and show as failed the sequence that caused the error?
    Dani

    hello Daniel -
    If you are talking about the behavior of the simple operator interface example for MFC, then the reason why the error immediately causes a 'skip to clean-up' is because it is set explicitly in the code for the error case. To fully handle the error (as the sequence editor would), you would want to modify the case where the error is detected and perhaps tap into the TestStand API for Engine.DisplayRunTimeErrorDialog( ). If you are able to view the C code written for the full version of the CVI operator interface, you may want to use that as an example of how to completely handle every error.
    An alternative is always to handle errors yourself. If you are interested in knowing strategies for such customizations I recommend you look into the shipping examp
    les and downloadable programs for sequences leveraging the PostStepRunTimeError callback.
    Regards,
    Elaine R.
    National Instruments
    http://www.ni.com/ask

  • App-V 5 SP2 - Error when clicking next after capturing changes in sequencer

    Hi
    I'm getting a strange error message when attempting to sequence an application using the App-V 5.0 SP2 sequencer. The application has a repackaged msi installer. After installing the msi and clicking 'next' after ticking 'I am finished installing software'
    I receive an error from the sequencer. "An error was encountered while trying to prepare the package for saving. Please check the event log for more details."
    Event viewer just logs an error under event ID 5006 "An attempt to prepare the package for saving failed (Error: 6629309790487068677)"
    I've searched for this error and only come across a couple of similar threads which mention corrupt shortcuts may be the issue. The installer creates a folder in the start menu containing two shortcuts, I've deleted the folder before capture and get the
    same error. Have tried applying hotfix 4 to the sequencer and get the same error.
    I've tried to delete the folders in the file system created by the installer and registry keys respectively before capture just to narrow down what is causing it to fail but I get the error every time. The sequencer is working fine as I can capture another
    application without issue.
    Could anyone suggest what may be causing this problem? I'm stuck for what to try next.
    Thanks

    Hi Steve,
    I'm receiving the same error as Stewang. The machine I'm sequencing on is clean. I installed a couple pre-reqs (Java and .Net Framework) for the application on the VM and then I started the sequencing process.
    The monitoring phase goes well, but at the point where the Feature Blocks can be created, the sequencer gives the error:
    "An error was encountered while trying to prepare the package for saving. Please check the event log for more details."
    In the eventlog I'm getting:
    An attempt to prepare the package for saving failed (Insufficient system resources exist to complete the requested service.
    This is not due to not using a clean VM or lack of system resources (enough disk space + 3GB RAM).
    What can be the issue here?
    Thanks!

  • TS3297 I get a R6025 runtime error when signing in to itune

    I receive a R 6025 run time error when starting a search in I Tunes Store.
    I have downloaed the latest version of itunes.

    someone told me about a quick fix until apple addresses the issue. put a shortcut onto your desktop, right click on the shortcut and choose run as administrator. you can search away. it worked for me.

  • Sequence error when creating a multiclip, help!!

    I have a bunch of clips I select and try to build a multiclip sequence with from 2 cameras with synced timecode, and after I click to build the multiclip sequence and go through the settings, I get an error that says:
    Sequence Error: Unable to add clip to sequence. Possible media limits problem in clip or sequence.
    this happens if I select 20 clips or 2 clips. Anyne have any suggestions? FYI, I am editing in native hdv.
    Thanks

    There has to be enough overlap between clips, I think 36% or so. Could that be a problem.

  • Error when adding a schema to an existing workspace

    I am trying to add an existing schema to my workspace, and am getting ORA-20001: Error with: GRANT EXECUTE ON DBMS_RLS TO BILLING ORA-01031: insufficient privileges. I tried logging in as sys and granting that privilege, and it worked. However, going back to the workspace, I still did not see the new schema listed.
    The user and tables have all been created in the database. The BILLING schema showed up in the available schemas to add to the workspace. I have also tried adding a new schema to the workspace. The BILLING2 schema was created, but I received the same error when it tried to add it to the workspace.
    Is there a grant or user that could be missing? I am using HTMLDB 2.0.
    Thanks!

    These are the current privs for that user:
    ALTER DATABASE
    ALTER SESSION
    ALTER USER
    CREATE ANY CONTEXT
    CREATE ANY DIRECTORY
    CREATE CLUSTER
    CREATE DATABASE LINK
    CREATE DIMENSION
    CREATE INDEXTYPE
    CREATE JOB
    CREATE LIBRARY
    CREATE MATERIALIZED VIEW
    CREATE OPERATOR
    CREATE PROCEDURE
    CREATE PUBLIC SYNONYM
    CREATE ROLE
    CREATE SEQUENCE
    CREATE SYNONYM
    CREATE TABLE
    CREATE TABLESPACE
    CREATE TRIGGER
    CREATE TYPE
    CREATE USER
    CREATE VIEW
    DROP ANY DIRECTORY
    DROP PUBLIC SYNONYM
    DROP TABLESPACE
    DROP USER
    EXECUTE ANY PROCEDURE
    SELECT ANY DICTIONARY
    SELECT ANY TABLE
    UNLIMITED TABLESPACE

  • Error When Modifying a Resource Event as Designate

    Hi,
    I'm developing an app for a conference room device using the C APIs and am having a problem modifying an event for a resource. If I use the same user ID as with which the event was created, everything works fine. However, I'm attempting to use an ID that is set as a designate for a group of resources, and when I do, I get a CAPI_STAT_DATA_UID_NOTFOUND error when using the CSDK_FLAG_STORE_MODIFY flag.
    Here's the data I'm sending:
    VERSION:2.0
    PRODID://Oracle//CAPI//EN
    BEGIN:VEVENT
    UID:20070111T141735Z-101b6d4-65-3559-Oracle
    X-ORACLE-EVENTTYPE:APPOINTMENT
    DTSTART:20070111T092000
    DTEND:20070111T095000
    END:VEVENT
    END:VCALENDAR
    Flags CSDK_FLAG_STORE_MODIFY | CSDK_FLAG_STREAM_NOT_MIME
    The SDk version is 10.1.2.0.0
    Is there any inherent problems with this approach?
    Thanks,
    Dave Bowman

    Here's some additional information on the problem and the sequence of events:
    1) Open the connection using user ID that is a designate for the resource.
    2) Change the user ID to the resource identifier ("?/RS=RENCI - Europa
    Conference 520/") using CSDK_SetIdentity with the flags set to CSDK_FLAG_NONE.
    The function call appears to work correctly and returns no errors.
    3) Modify the event data using CSDK_StoreEvents with the the above data.
    4) The error returned is: CAPI_STAT_DATA_UID_NOTFOUND. And the event ID is
    correct.
    I've tried both with and without using the CSDK_SetIdentity function, with the
    same results.
    Is it feasible to use this approach to have a resource be able to modify an
    event that was created by another user? Or is the use of another ID with
    higher privileges required? Such as 'SYSOP'? If the latter, obtaining SYSOP
    privileges may be problematic as we are just users of the Calendar system and
    not the owners.
    Thx.......

  • Error when submitting GRC request from IDM

    Hello GRC gurus,
    We were running into an issue when trying to set up our IDM - GRC integration; when submitting a request to GRC via the AC Validation task the "Submit AC Request" task always encounters an error, but in spite of which the request still gets created on the GRC end; weirdly enough, 2 requests get created each time:<br>
    putNextEntry failed storingcn=TESTUSER,ou=submitrequest,o=grc
    Exception from Add operation:javax.naming.CommunicationException: [LDAP: error code 2 - (GRC Submit Request:2:oracle.jdbc.driver.OracleDriver)]; remaining name 'cn=TESTUSER,ou=submitrequest,o=grc'
    <br>
    On the GRC end we noticed that we are getting the following error:<br>
    2011-12-05 20:21:32,046 [SAPEngine_Application_Thread[impl:3]_30] ERROR com.sap.security.api.NoSuchUserAccountException: Cannot find user when logonid is null!
    com.virsa.ae.service.umi.UMIException: com.sap.security.api.NoSuchUserAccountException: Cannot find user when logonid is null!
         at com.virsa.ae.service.umi.ume.UMESearchUser.getUserById(UMESearchUser.java:304)
         at com.virsa.ae.search.bo.SearchUserBO.getUserById(SearchUserBO.java:198)
         at com.virsa.ae.ejbutil.submitrequest.RequestSubmissionBean.submitRequest(RequestSubmissionBean.java:564)
         at com.virsa.ae.ejb.submitrequest.SubmitRequestEJBBean.getSubmitRequest(SubmitRequestEJBBean.java:45)
         at com.virsa.ae.ejb.submitrequest.SubmitRequestEJBObjectImpl0_0.getSubmitRequest(SubmitRequestEJBObjectImpl0_0.java:119)
    2011-12-05 20:21:32,064 [SAPEngine_Application_Thread[impl:3]_30] ERROR com.virsa.ae.core.BOException:  Error in Searching Users...
    com.virsa.ae.core.BOException:  Error in Searching Users...
         at com.virsa.ae.search.bo.SearchUserBO.getUserById(SearchUserBO.java:201)
         at com.virsa.ae.ejbutil.submitrequest.RequestSubmissionBean.submitRequest(RequestSubmissionBean.java:564)
         at com.virsa.ae.ejb.submitrequest.SubmitRequestEJBBean.getSubmitRequest(SubmitRequestEJBBean.java:45)
         at com.virsa.ae.ejb.submitrequest.SubmitRequestEJBObjectImpl0_0.getSubmitRequest(SubmitRequestEJBObjectImpl0_0.java:119)
    As a result of this error GRC AC Submit request never completes successfully and so the polling task never starts, instead immediately the pending values are skipped and removed from the user in question.<br>
    <br>
    What are we supposed to set the User data source as within CUP? Is there something else we should be doing to fix this?<br>
    <br>
    Would greatly appreciate your help with trying to fix this!<br>
    <br>
    Thanks a lot in advance!<br>
    <br>
    Best regards,
    Sandeep

    Hi Diego,
    Thanks a lot for your quick response! Sorry for the delay in responding; I was travelling.
    Uploading the new files from the Note you mentioned allowed us to view what the actual errors were; but we've started running into new errors now; when looking at the operation logs for VDS, I see that the webservice actually returns an operation result of SUCCESS also quoting that "Finished add operation"; which is why the request does in fact get created in CUP but a couple of log entries later after the webservice returns the request number I encounter the following error within VDS:
    Exception in GRC WS API call:oracle.jdbc.driver.OracleDriver
    Here's the error found in sequence within a set of other operational log messages within VDS:
    Time: Tue Dec 13 18:01:43 GMT 2011  Level: Debug  Thread: Thread[3,3,LDAP Sessions:main_listener_4389] Logger: Plain Message:
    End element SOAP-ENV:Envelope
    Time: Tue Dec 13 18:01:43 GMT 2011  Level: Debug  Thread: Thread[3,3,LDAP Sessions:main_listener_4389] Logger: Plain Message:
    org.apache.axis.i18n.resource::handleGetObject(empty00)
    Time: Tue Dec 13 18:01:43 GMT 2011  Level: Debug  Thread: Thread[3,3,LDAP Sessions:main_listener_4389] Logger: Plain Message:
    NSPop (empty)
    Time: Tue Dec 13 18:01:43 GMT 2011  Level: Debug  Thread: Thread[3,3,LDAP Sessions:main_listener_4389] Logger: Plain Message:
    org.apache.axis.i18n.resource::handleGetObject(setMsgForm)
    Time: Tue Dec 13 18:01:43 GMT 2011  Level: Debug  Thread: Thread[3,3,LDAP Sessions:main_listener_4389] Logger: Plain Message:
    Setting current message form to: FORM_OPTIMIZED (currentMessage is now org.apache.axis.utils.ByteArray)
    Time: Tue Dec 13 18:01:43 GMT 2011  Level: Debug  Thread: Thread[3,3,LDAP Sessions:main_listener_4389] Logger: Plain Message:
    Exit: SOAPPart::saveChanges(): org.apache.axis.utils.ByteArray@7ecd78
    Time: Tue Dec 13 18:01:43 GMT 2011  Level: Debug  Thread: Thread[3,3,LDAP Sessions:main_listener_4389] Logger: Plain Message:
    Operations result is:SUCCESS
    Time: Tue Dec 13 18:01:43 GMT 2011  Level: Debug  Thread: Thread[3,3,LDAP Sessions:main_listener_4389] Logger: Plain Message:
    Additional message = msgcode=000;msgdescription=Request Created;msgtype=SUCCESS;requestno=92
    Time: Tue Dec 13 18:01:43 GMT 2011  Level: Debug  Thread: Thread[3,3,LDAP Sessions:main_listener_4389] Logger: Plain Message:
    Requst number: 92
    Time: Tue Dec 13 18:01:43 GMT 2011  Level: Debug  Thread: Thread[3,3,LDAP Sessions:main_listener_4389] Logger: Plain Message:
    Exception in GRC WS API call:oracle.jdbc.driver.OracleDriver
    Time: Tue Dec 13 18:01:43 GMT 2011  Level: Debug  Thread: Thread[3,3,LDAP Sessions:main_listener_4389] Logger: Plain Message:
    *** Fetch result code ***
    Time: Tue Dec 13 18:01:43 GMT 2011  Level: Info  Thread: Thread[3,3,LDAP Sessions:main_listener_4389] Logger: Plain Message:
    Operation result: 2
    Time: Tue Dec 13 18:01:43 GMT 2011  Level: Warning  Thread: Thread[3,3,LDAP Sessions:main_listener_4389] Logger: Plain Message:
    Exception: (GRC Submit Request:2:oracle.jdbc.driver.OracleDriver)
    Time: Tue Dec 13 18:01:43 GMT 2011  Level: Debug  Thread: Thread[3,3,LDAP Sessions:main_listener_4389] Logger: Plain Message:
    Returning: opResult:2,info: ((GRC Submit Request:2:oracle.jdbc.driver.OracleDriver))
    Time: Tue Dec 13 18:01:43 GMT 2011  Level: Debug  Thread: Thread[3,3,LDAP Sessions:main_listener_4389] Logger: Plain Message:
    Finished add operation
    Time: Tue Dec 13 18:01:43 GMT 2011  Level: Debug  Thread: Thread[3,3,LDAP Sessions:main_listener_4389] Logger: Plain Message:
    Sending operation result
    Time: Tue Dec 13 18:01:43 GMT 2011  Level: All  Thread: Thread[3,3,LDAP
    Sessions:main_listener_4389] Logger: Plain Message:
    Sending response to socket: 63621
    Time: Tue Dec 13 18:01:43 GMT 2011  Level: Debug  Thread: Thread[3,3,LDAP Sessions:main_listener_4389] Logger: Plain Message:
    LDAP Session continues ...
    It's the strangest thing, because it seems to send the request across successfully which is how the request is getting created in CUP but after it succeeds it encounters the exception with the GRC WebService call from the API; any ideas why this is happening? how can we possibly fix this?
    Would greatly appreciate any insight / advice on this!
    Cheers,
    Sandeep

Maybe you are looking for