R61 System update not working

System update is not working: It tells me that it has to install a new version of system update. When I press OK, it shows a message from lenovo and gives the option to install a new version of system update. When I select install the download fails with the message "System Update konnte nicht heruntergeladen werden. Stellen Sie sicher, dass Sie über eine aktive Netzverbindung verfügen und versuchen Sie es erneut". The network connection is OK, or I would not be able to post this message. Therefore, what else can I do?
Matthias
Thinkpad R61 - 8918 DFG
Solved!
Go to Solution.

Thanks, that was the solution.
Matthias
Thinkpad R61 - 8918 DFG

Similar Messages

System Update not working correctly

Hi forum,
System Update (Version 4.00.0024) is not working correctly on my T500 with Windows 7.
1: Not detecting old versions
SU is not detecting, that there is an old version of Access Connection (5.42) installed although there is a new version 5.50 avaliable. I had to do a manual update.
2: Not installing a suggested update
Each time I run SU, I get a suggested update for "Fix for Issue of HDD with HDP Detection for Windows Vista/7". After downloading there comes a meaningless message "package was not installed" (Paket wurde nicht installiert). No hint for any error.
3: Some drivers (e.g. for the ultranav) have not been downloaded at all - I had to test the functions of some hardware components and download the appropriate drivers manually in case of malfuncion.
Probably there is a solution known within the forum community, at least this should be a message to lenovo (I received no response from the help desk when reporting this finding).
Regards
AH_DE

Dear Herik,
thanks for your answer.
I checked the log file and found thousands of entries. Here are the lines related to "Fix for ...".
Info    2010-02-03 , 08:40:37
          bei Tvsu.Gui.CustomComponents.UpdatePanel.SynchronizeBoxPackage(Object sender, EventArgs args)
          Message: Selected to install: Fix for Issue of HDD with HDP Detection for Windows Vista/7, with
Info    2010-02-03 , 08:40:43
          bei Tvsu.Coreq.LoadCoreqsProcessor.ProcessUpdatesImplementation(Update[] ups)
          Message: Candidate list:
Fix for Issue of HDD with HDP Detection for Windows Vista/7[reboot type 3]
Info    2010-02-03 , 08:40:57
          bei Tvsu.GenericPackageInstaller.GenericPackageInstaller.ExtractFiles(String extractCommand)
          Message: osfq03ww.exe -s -ex -fC:\SWTOOLS\OSFIXES Extract command was executed sucessfully in Fix for Issue of HDD with HDP Detection for Windows Vista/7 update
Info    2010-02-03 , 08:40:57
          bei Tvsu.GenericPackageInstaller.CmdInstaller.InstallUpdate()
          Message: Update Fix for Issue of HDD with HDP Detection for Windows Vista/7 is being install using Windows Service
Info    2010-02-03 , 08:40:57
          bei Tvsu.Engine.Process.PackageInstallerProcess.InstallNewUpdates()
          Message: Update Fix for Issue of HDD with HDP Detection for Windows Vista/7 installation failed
ADDITIONAL ENTRIES
Info    2010-02-03 , 08:40:57
          bei Tvsu.Gui.FlowScreens.Results.AdjustComponent()
          Message: System updated:
          Installed=0
          Not Installed=Tvsu.Beans.Update[]
          Deferred=0
          Download Failed=0
          Hidden=0
Severe          2010-02-03 , 08:41:17
          bei Tvsu.Sdk.SuSdk.ShutDownApplication()
          Message: Has happened an exception while the UNCAuthenticator.Shutdown() was executedShare name can not be null or empty
Since I'm a normal user only, I can't interprete this information. Do you know what to do?
Kind Regards
AH_DE

System Update--NOT WOrkING

my system update says i am not connected to the internet when i am...? i really need some help on this

I think the problem you have with iTunes mentioned in your first post may be related:
http://discussions.apple.com/message.jspa?messageID=5378966#5378966
Software updates typically add new features, and don't fix corrupted files.
Either you have a corrupt file, an overfull hard drive, or a directory issue, or bad peripheral connected giving you an issue. Once you isolate that issue, then perhaps software update will work. Is your data backed up?

My sound system is not working after my last updates on my imac,what shall i do to get fixed?

Hello any body who can help me out here?
My sound system is not working on my imac after the last updates,
WHAT SHALL I DO FOR????

apollos211,
You marked this as solved, so chances are no one else will respond.
You can try going Applications>utilities>audio MIDI set up, output tab and check to see if built in is selected.
Also check in system preferences>sound >output and see what is selected there.
If you look in the headphone port and see a red light (this means it is in digital mode), try taking a set off headphones and plugging them in and out several times also wiggle them around gently. There is a micro switch that sometimes gets stuck.
Hope this helps, if still no joy try reposting so that more contributers might check it, as once checked as solved it reduces the number of people checking.
All the best

Problem description: mac mail not opening, software updates not working, app store not opening. imac osx 10.9.5

Problem description:
mac mail not opening, software updates not working, app store not opening. 10.9.5
EtreCheck version: 2.0.11 (98)
Report generated 1 December 2014 16:51:49 CET
Hardware Information: ℹ️
iMac (21.5-inch, Late 2009) (Verified)
iMac - model: iMac10,1
1 3.06 GHz Intel Core 2 Duo CPU: 2-core
12 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 1/DIMM0
4 GB DDR3 1067 MHz ok
BANK 0/DIMM1
2 GB DDR3 1067 MHz ok
BANK 1/DIMM1
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400 - VRAM: 256 MB
iMac 1920 x 1080
BenQ GL2240 1920 x 1080 @ 60 Hz
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 1:32:17
Disk Information: ℹ️
WDC WD5000AAKS-40V2B0 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (164.03 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GA11N
USB Information: ℹ️
EPSON EPSON Epson Stylus S22 Series
Canon MX410 series
ASMedia AS2105 1 TB
S.M.A.R.T. Status: Verified
EFI (disk3s1) <not mounted> : 210 MB
Backup (disk3s2) /Volumes/Backup : 999.86 GB (506.24 GB free)
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader 7.95 GB
S.M.A.R.T. Status: Verified
EOS_DIGITAL (disk1s1) /Volumes/EOS_DIGITAL : 7.94 GB (7.83 GB free)
Western Digital My Book 1140 2 TB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
2TB (disk2s2) /Volumes/2TB : 2.00 TB (1.50 TB free)
Wacom Co.,Ltd. CTE-450
Contour Design ShuttlePRO v2
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (9.0 24217.979618) Support
[not loaded] com.parallels.kext.hypervisor (9.0 24217.979618) Support
[not loaded] com.parallels.kext.netbridge (9.0 24217.979618) Support
[not loaded] com.parallels.kext.usbconnect (9.0 24217.979618) Support
[not loaded] com.parallels.kext.vnic (9.0 24217.979618) Support
/Applications/Toast 10 Titanium/Toast Titanium.app
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
/Library/Extensions
[loaded] at.obdev.nke.LittleSnitch (4052 - SDK 10.8) Support
[not loaded] xxx.qnation.PeerGuardian (1.1.9) Support
/System/Library/Extensions
[not loaded] com.FTDI.driver.FTDIUSBSerialDriver (2.2.18 - SDK 10.6) Support
[not loaded] com.pctools.iantivirus.kfs (1.0.1) Support
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) Support
Startup Items: ℹ️
ParallelsDesktopTransporter: Path: /Library/StartupItems/ParallelsDesktopTransporter
WkSvMacX: Path: /Library/StartupItems/WkSvMacX
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[running] at.obdev.LittleSnitchUIAgent.plist Support
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.CS4ServiceManager.plist Support
[running] com.epson.epw.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[running] at.obdev.littlesnitchd.plist Support
[failed] com.adobe.fpsaud.plist Support
[loaded] com.adobe.versioncueCS4.plist Support
[loaded] com.barebones.textwrangler.plist Support
[running] com.cleverfiles.cfbackd.plist Support
[not loaded] com.gopro.stereomodestatus.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[invalid?] com.tvmobili.tvmobilisvcd.plist Support
[loaded] fi.polar.libpolar.plist Support
[running] fi.polar.polard.plist Support
[failed] xxx.qnation.PeerGuardian.kextload.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.facebook.videochat.[redacted].plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.macpaw.CleanMyMac.helperTool.plist Support
[loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
[running] com.macpaw.CleanMyMac.volumeWatcher.plist Support
[invalid?] com.plexapp.helper.plist Support
[not loaded] com.spotify.webhelper.plist Support
User Login Items: ℹ️
Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
SmartDaemon Application (/Library/Application Support/CleverFiles/SmartDaemon.app)
SilverKeeper Scheduler ApplicationHidden (/Applications/SilverKeeper.app/Contents/Resources/SilverKeeper Scheduler.app)
Dropbox Application (/Applications/Dropbox.app)
Garmin ANT Agent UNKNOWN (missing value)
Internet Plug-ins: ℹ️
DirectorShockwave: Version: 11.5.7r609 Support
Google Earth Web Plug-in: Version: 6.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
PandoWebInst: Version: 1.0 Support
AdobePDFViewerNPAPI: Version: 10.1.12 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
DivXBrowserPlugin: Version: 2.0 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.239
iPhotoPhotocast: Version: 7.0 - SDK 10.8
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.0.0 Support
AdobePDFViewer: Version: 10.1.12 Support
GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 Support
JavaAppletPlugin: Version: Java 7 Update 71 Check version
User Internet Plug-ins: ℹ️
fbplugin_1_0_3: Version: (null) Support
Safari Extensions: ℹ️
Open in Internet Explorer
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Adobe Version Cue CS4 Support
DivX Support
Flash Player Support
Flip4Mac WMV Support
GoPro Support
Growl Support
Java Support
MacFUSE Support
MenuMeters Support
Perian Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: NO - Auto backup turned off
Destinations:
Back Up [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Excellent
Backup size 0 B > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
      12% Google Chrome
      12% WindowServer
      4% Dock
      2% Little Snitch Agent
      2% SystemUIServer
Top Processes by Memory: ℹ️
399 MB iTunes
322 MB mds_stores
216 MB Google Chrome Helper
193 MB Google Chrome
155 MB com.apple.IconServicesAgent
Virtual Memory Information: ℹ️
6.64 GB Free RAM
3.51 GB Active RAM
1.36 GB Inactive RAM
1.11 GB Wired RAM
1.91 GB Page-ins
0 B Page-outs

[not loaded] com.pctools.iantivirus.kfs (1.0.1) Support
Un-install according to the developer's un-install instructions.
You do not need to use cleaning programs. They can destroy your computer operation as they may already have done.
CleanMyMac - Uninstall
CleanMyMac2 Un-install
After un-installing, run this program to make sure you got all the pieces.
EasyFind – Spotlight Replacement
Do a backup.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.appstore.plist. Move the .plist to your desktop.
Restart, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.

MOVED: MSI Live Update not working Windows XP Professional 64bit Edition!!!

This topic has been moved to Operating Systems.
MSI Live Update not working Windows XP Professional 64bit Edition!!!

Thank you so much. I just want to say I really appreciate when people do take the time to post me in return. So I really mean it, Thank You.
A quick question. You see, I have been upgrading my computer. I installed a Belkin USB USB Card (high speed 2.0) cause I needed more USB ports. Then I checked for compatable RAM and upgraded my RAM from 512MB to 2Gigs. Everything alright.
Now, I have checked for processors that are compatable with my board K9VGM-V (MS-7253). And MSI's chart says mine is compatable with the AMD Athlon 2x 6000 (3.0Ghz) *IF* I use the 89 watt and not the 125 watt. Here is a good URL for the processor details I found:
http://www.cpu-world.com/CPUs/K8/AMD-Athlon%2064%20X2%206000+%20-%20ADA6000IAA6CZ%20(ADA6000CZBOX).html
Now do you have any tips and I will probably have to flash to BIOS for sure after this upgrade won't I?

Security and privacy system preferences not working after Lion install. What to do?

Security and privacy system preference not working after Lion install. Not sure if it happen with Lion installer or after updating. What to do?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Why is my updater not working?

Why is my updater not working. I receive the following error message " no internet connection please check your internet settings and or firewall waiting for connection" I have checked my internet connection and it is in fact connected. What can I do?

Download and save the full Firefox installer to the desktop and start the installation with a double-click on the desktop icon.
You can find the full version of the current Firefox 27.0.1 release in all languages and for all Operating Systems here:
*http://www.mozilla.org/en-US/firefox/all.html

Same issue Network Discovery not working and Windows Update not working

I've read the threads.
This is a Vista Ultimate upgrade. My OOOOH My I have clocked 8 hours
Everything was working before. I tried all of the recommended services turning on restarting.
Also, ran into the problem of my memory being eaten. Suspected cause hibernate mode, which I had to disable. Scott Hasselman blog recommended the fix which is a cheap work around that limits machines functionality!!
I'm and IT Engineer specializing in MS product lines since Windows 1.0. MFC foundation classes etc.. What is the real problem ?
I don't have the NetBIOS over tcp/ip in my services?
I figure that the cost of my time and other individuals pays for the OS four times over. Give me a Microsoft developer subscription or something to make me happy. This is my development machine and I'm loosing time and money.
FYI, Just upgraded my second machine to Windows 8.1 OMG !!2 Hours to upgrade after the download. I loose my configuration settings. I required to have a Windows Live whatever account!!! This is not the way to compete and keep customers.
Windows XP has been by far the best deployment experience. I need a Knowledge base that gives solutions , not a troubleshooting scenario that does or does not work!!
Please , don't tell me to go and by a OEM Surface I cannot recommend this to my clients.
Thank You

Hi,
If it worked previously, a quick solution is to run System Restore and get back to the previous status when the issue didn’t occur.
What is System Restore?
http://windows.microsoft.com/en-us/windows7/What-is-System-Restore
When you turn on network discovery, do you get any error prompt?
Please check if you have any error message about network discovery in event viewer.
Open Event Viewer
http://windows.microsoft.com/en-US/windows7/Open-Event-Viewer
What information appears in event logs (Event Viewer)?
http://windows.microsoft.com/en-US/windows7/What-information-appears-in-event-logs-Event-Viewer
Please use Windows Live SkyDrive (http://www.skydrive.live.com/) to upload the Error logs to a public folder and share the URLs with us.
Also, please temporarily turn off your firewall and all the security programs for a test.
As far as I know, Network discovery requires that the DNS Client, DNS Client, Network Connections, Network Location Awareness, Remote Procedure Call (RPC), Function Discovery
Resource Publication, TCP/IP Netbios helper, SSDP Discovery, and UPnP Device Host services are started and set to automatic.
You should check again if you have started all these services.
Regarding the update issue, I suggest you try the following suggestions.
1. Temporarily disable firewall and antivirus program to test the issue.
2. Open the Windows Update troubleshooter
http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter
3. Reset Windows Update components
http://support.microsoft.com/kb/971058
You may follow the steps from the link below to fix the issue.
Windows Update Not Working.
http://support.microsoft.com/kb/555989
You may also see the common Windows Updates troubleshooting guide.
Fix Microsoft Windows Update Issues
http://support.microsoft.com/kb/906602
Hope it helps.
Regards,
Blair Deng
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

HT1338 software update not working

the software update on my system is not working. Anyone know how to fix.

Could please explain to us how software update is not working for you? Your question as asked it so generic, it not possible to answer it. Maybe if you could be more specific as to how it is not working for you or what is is not doing that is causing you problems.
Allan

My sound system does not work AFTER installing pc to tv wireless connection

my sound system does not work after installing hp pc to tv wireles device when I am using lap top for other purposes.

Hi,
You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
one used by the Form contact for Form Invoice.
Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
VS General Question forum mainly discusses
the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
System and Visual Studio Editor.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

System.out not working on eclipse

Greetings...
I am no longer a newbie on Java, but I have been facing an issue lately that I have been unable to resolve myself, even though it seems to be something so silly.
I have been using eclipse for development, and by developing a simple "Just to practice" code I have found myself unable to use System class or any of its methods at a certain point. See the code below:
package one;
import java.util.Scanner;
public ClassOne {
public static void main (String args[]){
Scanner reader = new Scanner(System.in); /*Works just fine here*/
int x = 0;
System.out.println("Type in the number of objects expected"); /*Does not work at all, like if System was something I could not use at all. Not an identifier */
Scanner readertwo = new Scanner(System.in); /*System does not work here either*/
}Even if I rewrite the code after that, by erasing the import statement and all other System references in the code, System does not work again.
If anybody has ever faced the same issue and knows what I am doing wrong and what I can do to fix it, I'd really be grateful.
Thanks to all, and happy 2009.
Santana T

Santana_Thiago wrote:
It works on NetBeans.
On eclipse I get the following error:
ERROR: JDWP Unable to get JNI 1.2 Environment, jvm->GetEnv() return code = -2+
*JDWP exit error AGENT_ERROR_NO_JNI_ENV(183): [../../../src/share/back/util.c:820]*+
The funniest thing is that if copy and paste the code from somewhere else into eclipse it works. What a drag!!!!
Thank you.
Santana TNever seen that error but it sounds to me that your Eclipse installation is screwed up!

A device attached to your system is not working!!

I am trying to connect to Oracle8i Personal Edition through a JDK1.2.1 application using the classes111.zip or classes12.zip package. After running the application I get this error message: UnsatisfiedLinkError: ocijdbc8: A device attached to your system is not working. I you have any idea what is happening, please answer inmediately.

You are using the oci8 driver so your program is looking for the native mode Oracle Client software. Install the Oracle Client software or use the thin driver.

Mac Book Software Update not working, iTune will not update because of that, iPhone 4 won't connect to iTunes because iTunes is not updated. Mac v.10.5.8, iTunes v.10.5.2, iPhone4 iOS 6

Mac Book Software Update not working (Software Update does not have any new software for your computer at this time), my current MacBook version is 10.5.8.
As a result I can't update iTunes, version 10.5.2 (This software requiers Mac OS X version 10.6.8 or later)
Now when I connect my iPhone 4, version iOS 6 iTunes can't connect to iPhone (The iPhone "XXXXX's iPhone" cannot be used because it requiers iTunes version 10.6.3 or later.)
so in a nutshell can't use iphone 4, because iTune is not updated and will not update because Mac Book is not up to date and will not update either.
Please help.
Thank you
bt465

Welcome to Apple Support Communities
Snow Leopard is a paid upgrade. http://support.apple.com/kb/sp575 Call Apple to buy Snow Leopard. Then, make a backup, insert the DVD and upgrade. When it finishes, open  > Software Update

External sound system is not working

Hi, the sound system is not working for my MacBook. It is working perfectly for my PC, however, when I plug it into my mac, every sound playing is being paused (e.g. iTunes are being paused on the second playing). What could be the issue?

That is what I am asking. It just does not make since that the Macbooks audio out/headphone plug works on some systems and not on that particular system.
If the system you are trying to use does not plug into the AC wall socket to get power then that could be one of the problems. But I believe you have try to tell us that is does plug into the AC wall plug and then plugs into the Macbooks headphone plug.
Is it possible that the Jack on the sound system you are experiencing problems with is bad?
Does the sound actually pause or just cut sound in/out similar to how a loose speaker wire might sound like?
Have you tried using this sound system on a different computer to see if the problem still exist?

R61 System update not working

Similar Messages

Maybe you are looking for