R6850 Cyclone OC Edition is causing Crash Problem !!

Using R6850 Cyclone OC Edition for my PC with configuration as below, got all the drivers up to date, and BIOS updated too. But each time I am using my PC normally for video watching or you tube, my PC crashes !!!! with a Black screen and nothing more. !
In-order to validate my doubt, I swapped the VGA input port of monitor to my default Intel VGA out port, and removed the power connector cables connected to the Gcard. It didnt crash at all. Hence after that I did some research and found out many people had there share of similar problems and were solved by changing their PSU. Please suggest me the solution, weather its a PSU or Gcard Problem. I have already RMAed my Gcard for the problem for the third time !!
Also, while surfing a webpage, I got a pixelated screen, and then my PC restarted. But the the surprising thing is it never crashes when I am playing games !!! Although it flickers randomly most of the times.
Any help would be greatly appreciated.
Here is my PC info:
Intel Desktop Board DG41RQ
MSI R6850 Cyclone OC edition
cooler master RS-460-pcar-D3
4gb DDR2 Memory
Windows 7 Ultimate SP1
AMD catalyst 13.1
PS: I did run those tests with funmark and Prime95, with no crashes.

can you test the card in another PC to isolate the problem?
have you tried msi vga drivers for your card?

Similar Messages

HT203477 New Itunes causes crashing problems with FCP X

Since I uptdated my OS X and iTunes, I am experiencing several crashes of my Imac 27. Anyone has the some problems ? Any solutions ?

fornoude wrote:
Hi Tom,
My whole computer is crashing and when I run Techtools pro 7 to repair permissions, there are so many files of the latest version of iTunes that are detected to be repaired.
I am also using Bitdefender as antivirus. Can Bitdefender be the cause ?
Most likely. These "antiviruses" often cause more harm than they prevent.

Need Advice Overclocking my R6850 Cyclone Power Edition

Hi guys, thanks for your time
so, i just got this R6850 with Cyclone cooling, it comes already OC'd at 860 MHz, but I read on some review that it's capable of reaching 1000Mhz with proper voltage tweaking, and since I'm a greedy bastard (aren't we all? ) I want all the juice I can squeeze out of this thing.
I got Afterburner installed, but I know nothing about overclocking beyond the basic definition of the word, although I don't think I'm gonna need to do anything more complex than adjust the slider under core clock (btw, core voltage is grayed out with no value, is this normal?)
how far can my power supply unit get me? I don't think cooling is an issue, as I've played several games so far with maxed settings and GPU temp (according to Afterburner didn't exceed 68c)

thanks for the reply, I tried that, but it didn't work, core voltage and shader clock (which I forgot to mention earlier) are both grayed out and showing no values.
I figured it might be the drivers, so I uninstalled the drivers that came with the card (v10.11 or something like that), restarted and then downloaded and installed the latest drivers,.. still the same

Editing Event Causes Crash

When I edit an event (either by double clicking on it or by Command + E) iCal occasionally crashes. By occasionally, I mean about every sixth edit ... launch iCal ... edit an event ... then another and by about the sixth time the spinning beach ball happens and then iCal crashes.
Anyone else experiencing this with iCal 3.0.1 and OSX 10.5.1?
Anyone successful in resolving the same?

I'm having the same issue it seems, its driving me crazy.
I deleted everything iCal (plists, cashes).
I started fresh with a brand new calendar (no imports from previous icals).
When I add meetings in iCal, it works fine but after several entries, I will suddenly get a beachball and iCal will quit. I then restart it. I put in from 5 to 10 entries then crash again.
I'm really tired of this. No one can tell me its my old database doing this.
This for sure is a bug with iCal Leopard.
Console app gives me this :
3/3/08 3 11:54:04 AM com.apple.launchd[89] ([0x0-0x10b10b].com.apple.iCal[3093]) Exited abnormally: Segmentation fault
3/3/08 3 11:55:14 AM com.apple.launchd[89] ([0x0-0x10f10f].com.apple.iCal[3110]) Exited abnormally: Segmentation fault
3/3/08 3 12:00:47 PM com.apple.launchd[89] ([0x0-0x110110].com.apple.iCal[3114]) Exited abnormally: Segmentation fault
3/3/08 3 12:01:47 PM iCal[3128] Rethrowing NSGenericException: * attempt to allocate id buffer with too large of a count (1099956224) -- possibly data is corrupt
3/3/08 3 12:01:47 PM iCal[3128] * attempt to allocate id buffer with too large of a count (1099956224) -- possibly data is corrupt
3/3/08 3 12:01:53 PM iCal[3128] Rethrowing NSGenericException: * attempt to allocate id buffer with too large of a count (1099956224) -- possibly data is corrupt
3/3/08 3 12:01:53 PM iCal[3128] * attempt to allocate id buffer with too large of a count (1099956224) -- possibly data is corrupt
3/3/08 3 12:02:02 PM iCal[3128] Rethrowing NSGenericException: * attempt to allocate id buffer with too large of a count (1099956224) -- possibly data is corrupt
3/3/08 3 12:02:02 PM iCal[3128] * attempt to allocate id buffer with too large of a count (1099956224) -- possibly data is corrupt
3/3/08 3 12:02:05 PM iCal[3128] Rethrowing NSGenericException: * attempt to allocate id buffer with too large of a count (1099956224) -- possibly data is corrupt
3/3/08 3 12:02:05 PM iCal[3128] * attempt to allocate id buffer with too large of a count (1099956224) -- possibly data is corrupt

New RAM causes crash problems

Hello Everybody,
have some problems with new RAM for my G5. With the original 4 x 256 RAM everything's going fine, but as soon as I correctly stick in the new 2 x 1 GB (Mac Dealer bought), my mac's going crazy (crashes or not being able to install and so on...) Changed the new RAM allready at my Mac Dealer, things remain the same. Does anybody have an idea?

Have you made sure the RAM is properly seated?
If it is, contact the Mac dealer and inform them they have a bad batch of RAM.

MSI R6850 cyclone fake advertisement

Hello.
I bought a MSI R6850 cyclone power edition OC and before doing that, several websites (related directly with MSI) said that I would get a free copy of the game DIRT 3. That was one of the reasons why I bought this card, and I feel pretty disappointed with that because I haven't found the way to receive that game so far.
I changed from Sapphire to MSI because of the great reviews I found about MSI products on guru3D.com, and when Sapphire promised me a free copy of DIRT 2 years ago they kept their word.
links:
http://sites.amd.com/us/game/games/Pages/dirt-3.aspx
http://event.msi.com/vga/Dirt3/
http://www.msi.com/news-media/news/1252.html
Thanks for reading.
Please excuse me for my broken English, I'm still learning it.

*Due to regional differences in product and inventory, other application(s) may be bundled with MSI graphics cards. When making a purchase, be sure to select a MSI graphics card box with a "DiRT 3" sticker attached to ensure that the full game activation code for " DiRT 3" is included.
What I put in above is at the very bottom of the MSI news media link you posted.
You got one (older stock) without the sticker on the box or the offer simply is not available where you live.
You need to ask the people at the store where you purchased the card.
No fake/false advertising at all.

CC 2014 (18.1.0) | Text Field editing causing crashes (Windows)

Greetings;
I've noticed lately that when saving files from CC 2014 to a CS6 format - and having those files edited on Mac, in either CS6 or CC - when re-opening those files text fields have been causing crashes on the Windows client. When that same file is opened and text fields are edited on the Mac client, a prompt will just appear stating "Cannot Edit text" - yet it still allows it.
This has caused multiple issues for our teams as it has created files we're starting to refer to as "mine fields" - as working with the .ai file is like playing Russian roulette with text fields, you never know which one is going to crash the file.
I would love to work with a team member from Adobe to help find a resolution to the problem, and I'm willing to provide any additional details that might aid in that process.
Thanks!

Hello Pureweb,
Please upload the crashdumps on some file sharing website say Dropbox and share the link with us by sending a mail to "[email protected]". We will analyze the dump and will suggest you the workaround appropriately.
In parallel, please check that you do not have any 3rd Party plugins installed in it. Please try to remove them one-by-one and see which one causes the crashes or do reverse i.e. remove all the 3rd party plugins. Or Uninstall Ai and check at following location:
C:\Program Files\Adobe\Adobe Illustrator CC 2014
Please verify that nothing is left at above location on uninstalling Ai. Then try a fresh install and see if Ai works.
Also, verify that you have the updated Wacom drivers on your system. This might be an issue with the 3rd party program as well. One of the user who was having a similar issue reported on the Ai forum that one of the 3rd party Stahl's ImageWorx DTG RIP - a program for printing to a Direct To Garment printer was causing the issue. So, you may check if the similar thing is not happening in your case.
Regards,
Dhirendra

MSI R6850 Cyclone edition displaying nothing on screen

Hi all. Just got my R6850 today and plugged it into my computer got everything connected but when i turn my computer on my Monitor just says "DVI Power saving mode". Ive tried the DVI to VGA adapter but still nothing and my HDMI cable wont go into the HDMI slot on the card. Ive checked the cables and tried taking it out and putting it back in to hope its fixed but still nothing.I did a search on these forums and there was a thread saying it was something wrong with the card but that was back in February and im guessing they would of fixed that. Any help would be awesome as im kinda annoyed its not working. By the way when my monitor says "Power saving mode" thats when there is something connected but theres no picture coming up on the screen.

Ok sorry ill try and make this more detailed.
Hi all. I just got my MSI R6850 Power cyclone edition Graphics card. Now i will try and put more detail to this post but i havent had much sleep so sorry if i don't add as much detail as i can. Here goes. The numbers on the back of the Card go as following
R6850 CYCLONE 1GD5-S/N602-v244-13sb1107028556. Here is also a link to the Website i bought it from.http://www.ebuyer.com/279842-msi-hd-6850-cyclone-1gb-gddr5-dual-dvi-hdmi-dp-pci-e-graphics-r6850-cyclone-1gd5.
My PC specs are:
AMD Phenom X6 1090T
Gigabyte 880GA-UD3H here is a link to this aswell http://uk.gigabyte.com/products/product-page.aspx?pid=3628#ov. Oh and i looked between my PCIE slots but i couldn't find a model name or number
Corsair GS600 watt PSU
Corsair GS600 Power Supply (CMPSU-600G)
Voltage   +3.3V   +5V   +12V   -12V   +5Vsb
Max. Current   25A   25A   48A   0.8A   3A
Max Combined Wattage   150W   576W   9.6W   15W
600 Watts @ 40°C ambient temperature
Samsung HD103SJ Spinpoint F3 1TB Hard Drive SATAII 7200rpm 32MB Cache
4GB of Corsair XMS3 RAM 1600MHZ.9-9-9-24
Does DVD player matter? if so i got some cheap DVD player.not sure of the name.
Samsung HD103SJ Spinpoint F3 1TB Hard Drive SATAII 7200rpm 32MB Cache
Thats all i could think of. I hope its as much as you need since sleep deprived= me not being as smart as i am and missing stuff out. Now to the problem. So i plugged in my MSI HD6850 Cyclone edition and turned my computer on. Sadly nothing came up on my monitor. Now i had read a thread on the 6850's having this problem but i just bought mine and the thread was back in February so i dont think i have the same cards. Also i got a free copy of Deus Ex:Human Revolution if that helps. Now i dont know if i should send back to Ebuyer where i bought it from or send it in for repairs which is why im here. Once again sorry if this isnt enough details because im so eager to get this card working .

Safari Crash - Problem with doodle (planer) app - doodle web links cause safari to crash with a very strange message "Error - Please make sure Safari is not used in Private Modus" (translated from german) No Privat Modus buttom in ios 7 safari settings!

Safari Crash - Problem with doodle (planer) app - doodle web links cause safari to crash with a very strange message "Error - Please make sure Safari is not used in Private Modus" (translated from german) No Privat Modus buttom in ios 7 safari settings! Works fine with an older Safari Version. Web link, call doodle app. You could see the website in the backround working but safari crashes after clicking on the error window. Any suggestions?

Turn off Private Browsing.
Tap "Private" on Safari Screen to disable Private Browsing. When top of screen is white, Private Browsing is off.

I have a vi that will not let me make many edits before it crashes.

I have been working on a data acquisition program for over a year. Over time it has grown and become more and more complicated. Now the vi will no longer let me make substantial changes. After making edits, when I click, save, LabView crashes. There is no message, just the whole thing disappears.
I don't know what to do now. I need to make major changes to this vi but am unable to do so because of this LabView bug. I tried copying everything into a new vi, but have the same problem.
I developed this program initially on a Macintosh under OS9 with Labview 7. I upgraded to labview 7.1 and the computer to OSX. I have the problem in OSX. There is no going-back now.

I've never had such an issue, but I would try a mass compile (tools, advanced, mass compile) first.
Note which VI's have errors and strip them out.
If that doesn't work, individually save each subVI until you figure out which one is causing the problems. If you are using any third party daq software you may want to uninstall/reinstall it. Those third party dll's can get you (or whatever type of libraries OSX uses).
Mark

Windows edited/saved project crashing on mac (adobe premiere cs5)

hi there
i really hope you can help.
i have edited video files on adobe premiere cs5 on a windows 7 machine and saved the project ffiles on an external drive formy friend to colour grade and finalise etc
he can open the video files in adobe premiere, but its crashing his mac system and some video files arent opening
he says he has all the latest codec files but it has gone to the extent of the files crashing his system and it won't boot..
my files were a mixture of mpeg and avi files...
is there anything that can be causing this problem.
he is in a different city from me, so i am not going to see him for a while and i want these video files edited as soon as really
thanks and i hope you can suggest thingss that may help finding the problem

Welll you wont be able to if you do not have the computer anymore.
Do a search on EDLs in Premiere (or any NLE) so you know about them for next time.
Whatever...I suspect the issue is at your colleagues end and needs to be sorted there. Someone with a Mac may chime in on how PPRO win project files and PPro Mac project files work.

Barn doors transition causes crash

Dear Community,
Applied barn doors transition to a project in CS4. Stored that project in 2010.
Opened the project in CS6 CC - and barn doors caused crashes - so I cleaned off the old and applied replacement barn door transitions in CS6 CC.
Once the wipe is applied - its fairly stable - sometime crashes sometimes doesn't.
If I apply a broder colour to the wipe - all ok.
If I then apply a border thickness - crash every time.
System;
Premiere Pro CS6 - 6.0.3 (001 (MC: 264587)) through cloud membership
Updated and current
Win 7 Pro - SP1 - 64 Bit
Source footage SONY EX3 - .mp4 and still image .png's
No error messages - just crash and need to restart PP CS6
Try to apply colour and border to a barn door transition causes the error
This worked before on the smae project when created in CS4
Not running other software at the time
NewBlueFX modules installed but not applied to this area of sequence
i7 - 3.20GHz, 16GB RAM, SSD OS drive, 4 x drive RAID on LSI RAID card, - No I/O hardware
I am using Are you using Mercury Playback Engine Acceleration and CUDA
Problem occurs during normal edit - as soon as I start to adjust the barn doors wipe - I don't get to compression
Thanks
Dave

Doies it help anyone that I just received this from the email address; [email protected];
Hello,
You have received this email because the content you posted below has been rejected by our moderators.
Re: Barn doors transition causes crash
posted Jun 5, 2013 5:15 PM
Since the original report earlier today - I now just have to put the timeline scrubber over the barn doors transition and PP CS6 closes without an error message and without saving. The unfortunate part here is there doesn't seem to be any record or log of the crashes to be able to disseminate whats going wrong.
Barn doors worked in CS4 - and the only change in this project is the re-opening in CS6 CC."
Question; Did I put something in there that was defammatory, rude, obnoxious, incorrect or un-helpful?
If anyone here believes I did, I sincerely apologise for the need of moderators to have intervened... and for causing any offence.

HT5704 Hi, Two recent updates for my iPhone have caused crashes (down the white lead via iTunes).I have "fixed" but not sure of the cause?

Hi,
Two recent updates for my iPhone have caused crashes (down the white lead) via iTunes.
I have "fixed" but I don't know the cause?
Each time the update does n't complete.
The download does n't happen.
The computer & internet connection are good.
It is as if the Apple server does n't complete?
The phone stays in recovery mode, until you reset and rebuild in iTunes.
All software is up to date, but I can't find the cause
ANY IDEAS?
Regards,
P.
<Email Edited by Host>

No error messages.
It just fails to complete the download, so recovery mode is the next step.
This can be over a period of eight hours or more!
I have so many (original) Apple USB leads that I would n't know if I have been using the same one (if it was faulty).
Does this sound like a "common" problem?

Encrypted "Application Support" cause crashes

I am not sure if this is a question that can be addressed, but please bear with me as I try to explain what I discovered today.
For years (since Leopard), I have done this setup with my Mac:
1. Create an encrypted disk image using Disk Utility (AES128 or 256)
2. Mount the encrypted disk image (/Volume/Encrypted)
3. Move the folder ~/Library/Application Support/ to the encrypted volume
4. Create a symbolic link: ln -s ~/Library/Application\ Support /Volume/Encrypted/Application\ Support
And prior to Mavericks, I was able to setup this disk image to be auto mounted after boot (though I still do not save the password to key chain, for additional privacy/security reasons).
The reason I did this was an attempt to protect my privacy, without knowing exactly what is stored in the ~/Library/Application Support folder. From casucally poking around, it seems to be where most applications store its settings and data, so I thought this was a good things to do in case someone stole my laptop, at least some of my privacy is guarded. And I have never had any issues with it in all previous versions of Mac OSX.
Until I bought a new laptop that came with Mavericks. One of the first things I did of course was to do my little setup, setup the encrypted disk image, and create the symbolic link.
And then, I started experiencing all kinds of weirdness. I first noticed it when I tried to open some Pages documents that I had created earlier using an older version of iWorks. Pages, Keynote, and Numbers would very consistently hang (and eventually crash, or require me to force quit it), whenever I try to make it open an older document. I found this bizarre, and for a while I blamed it on the new version of iWorks suite thinking that it's gone the Microsoft route of not providing backwards compatibility. And then, I opened QuickTime to do some quick editing of a video (flip it vertically), and when I tried to save it, QuickTime would have the same behavior like the iWorks applications, and eventually requiring me to force quit it.
For almost a month I fought with this, and having never used Mavericks until the new laptop, I just thought these were issues in Mavericks or the new verison of iWorks. It never occured to me that my symbolic link setup would interfere. Unilt today. I took this in to the Apple Store, in hope to get some help from the Genius Bar folks. The person who helped me was very knowledgeable, and after some troubleshooting, he was a little confused by my seemingly mising "Application Support" folder (since in Finder symlinks don't show up as a link), for the sake of troubleshooting, I removed the symlink, copied everything from the encrypted disk back (so now everything is stored on disk unencrypted). And viola! That solved all of my app-crashing problems.
Now, I am curious... my understanding of mounting an encrypted disk tells me what I did *should* not have caused an issue (and it hasn't for the last 5+ years). Why would this be an issue in Mavericks? And further more, do the good people on this forum have any suggestion for me to have some level of protection (encryption) for my personal settings, that will work in Mavericks?
Thank you.

And further more, do the good people on this forum have any suggestion for me to have some level of protection (encryption) for my personal settings, that will work in Mavericks?
Try FileVault instead.

Files Corrupted on Timeline and Causing Crash--PE4

Greetings all.
PE4 has always been crash-happy on my machine, the specs of which I list:
CPU: Intel Core 2 Duo @2.66GHz
RAM: 4GB DDR2
OS: Win7 x64 service pack
Graphics card: nVidia GeForce GT 520 (2GB)
Harddrive: 1TB (Seagate, I think...could be Western Digital) with 645GB free space
From the threads I've read, I've seen that nVidia cards can sometimes cause problems with Adobe software, so that could be part of the general crash problem. My driver is the latest (updated today, 7/3/13.)
Anyway, I've begun encountering a problem with a 33-minute-long animated film I've been editing in PE4. The movie has a lot of material on the timeline because all the animated video clips were split up with freeze frames in post-production to sync footage with dialog, and then there are a bunch of short sound effect clips on top of that plus music. Total, I have two video tracks and 8 audio tracks. I published the movie as an MPEG to my computer last night and then this afternoon, I burned a few DVDs of the finished project. When I reached a point about 13 minutes into the film, the speakers on my TV emitted a horrid screaching noise that lasted for about two seconds. In the film, a .wmv clip is playing with an ambient sound effects clip and a series of three short, consecutive sound effects for a character knocking on a wood box. (These audio clips are in separate tracks and are not a part of the .wmv file; I added them separately.) I thought perhaps my TV speakers were the problem, but my computer speakers acted the same way. Next I assumed that some glitch had occurred in media encoding and so I closed PE4, reopened, and burned a new disk with the same result. I checked the .mpg file that I exported last night, and the screach was absent from it.
I next tried to examine that specific spot in my timeline, but when I scrolled to it and zoomed in to a level where I could see <1 second long sound clips, the program crashed without mentioning a specific error. The Windows error reporting box popped up and simply informed me that "Adobe PE4 has encountered a problem and needs to close." Sceneline mode doesn't crash at that point, but timeline does. The only thing I can conclude is that somehow files on the timeline got corrupted between last night and this afternoon, but since I can't even look at that part of the timeline without a crash, I can't even replace the clips at that area. Am I overlooking something silly here? Any help would be appreciated. If I haven't supplied needed information, I'm sorry; and I'll be happy to add it.
Thanks,
Andrew Hild

Andrew Hild
Let us start with the usual drill.
Please check
Adobe Folder. For pile ups of previews in Adobe Premiere Elements Previews Folder and conformed audio (cfa and pek sets) in the Media Cache Folder.
Edit Menu/Preferences/Media. Click the Clean button to get rid of all conformed video (.mcdb) files.
Run the ccleaner (regular and registry cleaners)
http://www.piriform.com/ccleaner
Remember you have only a 32 bit application there with all the resource limitations of 32 bit system. That makes computer optimization, especially around the time of high productivity, important to keeping the subsequent workflows flowing to a successful completion.
You wrote
These audio clips are in separate tracks and are not a part of the .wmv file; I added them separately.)
But do they sit on top of .wmv footage that has its own audio so that the audio of the .wmv is in conflict with that of the audio clips above it?
You may have two problems, audio conflicting and resources compromised.
Please review and let us know if any of the above applies to your situation.
Thanks.
ATR

R6850 Cyclone OC Edition is causing Crash Problem !!

Similar Messages

Maybe you are looking for