R6970 lightning, black screen after starting Windows screen

Alright so I've been getting a few random bsod saying something about non paged error. At first it was random sometimes in Windows sometimes before the login screen. But then it became consistent, couldn't boot to Windows at all after the starting Windows screen it would bsod everytime. So ran memtest and system repair off the disk and found no errors. So then one time I found the bsod showed an error with atikmdag so then I started to look into driver issues. Deleted catalyst, the drivers and then rebooted. Long and behold it booted Windows fine. Once I loaded Windows it said installing device driver for the graphics card, it finished and prompted a reboot. So I did but on start up after the starting Windows screen it just goes black. Will go into safe mode fine but otherwise black. And it will do that with an old driver, new driver, whether I install with catalyst or Windows does it. Switched via bios and no screen at all on any other setting than the middle switch. So grabbed a gtx 650 from my brother and plugged it in and it booted fine, installed the driver and no problems. So is my card shot or is there something I am missing? Do I have a corrupt bios and need to flash it?
Another note it ran games fine and wouldn't crash but when it was just sitting with Google Chrome and a few tabs is when it started having problems.
System specs
I5 3570k @4.6ghz
Asus maximus v formula
16gb (2x8gb) gskill ram 1333 @1600
R6970 lightning s/n: 602-v237-020B1109228417
Windows 7 pro 64bit sp1 up to date
Lucid logixs enabled
Oct 750 power supply

save and upload current vbios of the card to check it

Similar Messages

  • Screen gone black straight after started calling

    In my Lumia 930 screen goes black straight after call is started. Why us that and how I can fix it?

    See under Try the following HERE

  • MOVED: R9 290X Lightning - Black screen freezing

    This topic has been moved to Graphics Cards.
    https://forum-en.msi.com/index.php?topic=254587.0

    So I decided to RMA the card a few days ago. I'd been running perfectly on the integrated graphics while I waited for my replacement. I just recently installed it and it worked great... for about 5 minutes and then I got a black screen accompanied by the gpu fans blowing full speed. I immediately shut off the pc and have not been able to boot with the card anymore. Even if it's all installed and properly plugged in it is not recognized in windows and won't show up at all in the bios board explorer (says PCIe slot is empty). At this point I'm thinking it might be the motherboard but the card also refuses to work on other setups. I've also tried different power supplies with no success. At this point I'm thinking of just trashing this card and going with an nvidia since my friend's card (gtx960) works fine on my pc.

  • After start Windows 8 on Macbook Air (late 2011) all freeze.

    When I start Windows 8 on Macbook Air (late 2011) all freeze. If I switch off Wi-Fi adapter or power unit problem does not exist. Do you have same problem?

    Here's how to fix the problem.
    Macbook air 2011 freeze fix
    1. Install Windows using Boot camp on battery power (AC adapter unplugged).
    2. After the installation, right click on the power icon.
    3. Click More power options
    4. Click change plan settings for the balanced plan
    5. Click change Advanced power settings
    6. Select "PCI Express"
    7. Selct Link state power management
    8. Change Plugged in from Moderate to OFF.
    Done! No more crashing. Now you can plug in your AC adapter.

  • 290x Lightning Black Screen

    Board: GIGABYTE GA-Z97X-UD3H-BK
    Bios: F7 2015/04/22
    VGA:   290X Lightning
    PSU:   Corsair HX Professional Series 750-Watt 80 Plus Certified - CMPSU-750HX
    CPU: Intel Core i7-4790k
    MEM: G.SKILL Sniper Low Voltage Series 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-8GBSR2
    HDD: OCZ Technology 120GB Agility 3 - AGT3-25SAT3-120G
    COOLER:  CORSAIR Hydro Series H110 Extreme
    Currently no overclock
    OS: Windows 8.1 64bit
    I have had this card since early February and have been running it without issue. It was stress tested in furmark immediately after install without bsod or reboot. The problem started about a week ago. I woke up in the middle of the night due to the fans running at 100% on the card. I could not get the screen to wake. I had to connect to the onboard passthrough from the i7. It did start working again after several reboots. The problem seems to pop up randomly. Either in the middle of the night when nothing is running or during light browsing. The issue never occurs when gaming. When the problem happens the blue lights indicating power usage do not light up. Currently the card is still installed but it is not coming back up after several reboots. I am currently running off of the IGP with no issue. The problem appears to be exclusive to the card.

    Did some more testing tonight. My computer had been off all day today while at work. I switched my monitor back to the 290x and booted. The card was recognized and displayed correctly. I then ran furmark for two hours while running a cpu stress test as well. There was no issue what so ever. Later in the evening I watched a youtube video and the display cut out when it was closed.
    I can try another card tomorrow night. It's a 570 gtx which would only be a test to see if the behavior is specific to the discrete video as this issue doesn't seem to effect the IGP.

  • Shell replacement but touch functionality not available after start

    Hi all,
    i use Windows 7 Pro and I want to replace the Windows shell (eplorer.exe) with my own application.
    For testing I changed all neccessary registry entries to notepad.exe (on board) as shell. After starting windows with autologon, notepad appears and no deskop and taskbar. Exactly what I expected. The problem is, the touchfunctionality is not available directly
    after starting windows. No keyboard an mouse function. When I wait for 3 - 4 minutes without doing everything, the touch functionality is suddenly present.
    When I change back to explorer shell, the touch funktionality is present directly after starting windows.
    Does anybody know, how I can force the touch functionality, so that the touch work directly after starting windows with my own shell (Notepad)?
    Further Information:
    I use no third party driver and the touch display is connected via USB to simulate keyboard and mouse.
    Thanks in advance.

    Hi, 
    To check the root cause of this issue, I suggest you follow these steps to create 2 boot trace file for comparison: 
    1. Start your computer in normal, and install WPT (http://social.technet.microsoft.com/wiki/contents/articles/4847.install-the-windows-performance-toolkit-wpt-en-us.aspx)
    and run following command to trace boot sequence, it will let you restart your computer. 
    xbootmgr –trace boot -traceFlags BASE+LATENCY+DISK_IO_INIT+DISPATCHER+DRIVERS+FILE_IO+FILE_IO_INIT+NETWORKTRACE+PERF_COUNTER+POWER+PRIORITY+REGISTRY -postBootDelay 300 -resultPath C:\Boot_Trace_Normal
    2. In normal mode, please do the changes to replace Windows shell, then run following command to capture the boot trace during restarting: 
    xbootmgr –trace boot -traceFlags BASE+LATENCY+DISK_IO_INIT+DISPATCHER+DRIVERS+FILE_IO+FILE_IO_INIT+NETWORKTRACE+PERF_COUNTER+POWER+PRIORITY+REGISTRY -postBootDelay 300 -resultPath C:\Boot_Trace_Replace
    3. Check the difference by using Performance analyzer in WPT and referring following article: 
    WPA Detailed Walkthrough
    http://msdn.microsoft.com/en-us/library/windows/hardware/hh448179.aspx 
    Also, you can upload the two log files into SkyDrive or similar network drive and share the public link for us to research. 
    Keep post.
    Kate Li
    TechNet Community Support

  • My laptop touch pad freeze sometimes & appearing black screen after login in windows start up.

    Hi, i have problem with my laptop touchpad, it freezes and i have to wait between 1-2 min.... and also while starting of windows the black screen will appears for few seconds after log in. Please help me to fix both problems, Thanks.
    I'm running Windows xp professional version 2 service pack 3,
    my product name is :-HP 500,
    product no. is :- RW859AA#ACJ.

    @jagadish1210 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • Windows 8.1 doesn't start after update. BLACK SCREEN AFTER LOGIN

     Before all, sorry my english, I'm brazilian and don't found the solution on the brazilian version of HP website.
     After I did the updates, the system ask to restart the notebook, so I did it. And now, when I do the login, after the password page, the Windows doesn't starts. Just a Black Screen appears.
      I can't open the right side window to acces the configurations, and this laptop doesn't have a battery to take out and put in again.
     I had already restore the system.
     So, I use my laptop to work, and it has only 4 days of use.
     I need help! Thanks!

    Hi,
    Run through the following procedure.
    Boot the computer normally and log-in.
    At the black screen, hold down the ctrl and alt keys and press delete.
    Select Task Manager.
    Click on File and select Run new task.
    Type cmd.exe - also enter a tick in the box for 'Create this task with administrative privileges' - and click Ok.
    Type in the following command ( including spaces ) and hit enter.
    Dism /Online /Cleanup-Image /RestoreHealth
    This will take a while to complete, but when it’s finished, restart the notebook.
    If the screen is still black after you log-in, once again, hold down the ctrl and alt keys and press delete.
    Select Task Manager.
    Click on File and select Run new task.
    Type cmd.exe - also enter a tick in the box for 'Create this task with administrative privileges' - and click Ok.
    Type in the following command ( there's a space between sfc and the / ) and hit enter.
    Sfc /scannow
    When the scan has finished, check that the result is ‘No integrity violations’, then type exit and hit enter.
    Restart the notebook again.
    Any change?
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • After an iPad update yesterday I sent a video and it is not viewable just black screen but sound is there. I sent it to my windows 7 laptop and there it is not viewable at all the start button appears crossed through.only works on apple PC

    After yesterday's update sent  a personal video  it was not not viewable , i was told only black screen but audio, will play on apple pc but not windows.
    On my own windows operated laptop when l open the video the start button is crossed through
    Is there something l need to do? I can view the videos fine on my iPad ?

    'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • Cannot reinstall windows 10 Technical preview after getting black screen at start. will not let format drive or install

    cannot reinstall windows 10 Technical preview after getting black screen at start. will not let format drive or install

    you may need to use a DVD from an earlier version of Windows or slave the disk to wipe it with disk manager
    Place your rig specifics into your signature like I have, makes it 100x easier!
    Hardcore Games Legendary is the Only Way to Play!
    Vegan Advocate How can you be an environmentalist and still eat meat?

  • After errors with disk partition, I removed Windows from my iMac. Now when I start my computer it goes into a black screen and not straight into the Mac area like it used to, unless I hold Alt straight away to give me the option.  Any help?

    Hi,
    Sorry, I'm new to the community, so apologies if I'm repeating myself.
    OK, so I tried to install Windows Vista onto my iMac with the disk partition.  Everything was going fine and it wasn't until last minute, when it was installed that an error came up saying that this can only be done with Windows 7.  After this error, I couldn't access any errors of my iMac and when I shut down and restarted my computer, it automatically logged into Windows.
    So after a panic, I rang Apple Care and the lady helped me log into my apple area, delete Windows from my iMac, and all was restored.
    However, now when I shut down my computer and boot it back up, I think my iMac is trying to log into Windows areas that no longer exist.  It loads up a black screen and doesn't move from there.  To log into my Apple area, I have to do the whole process of holding Alt immediately after I switch the power on and access the Mac drive and log in that way.
    It's beginning to become a real pain and I'm paranoid this process is going to damage my computer.  Any advice on how to restore logging-in back to it's former glory when I first purchased it?
    Thanks

    Solved it.  Thank you very much for that!

  • HP Envy 14 - black screen after start up screen when trying to recover the system

    I have a HP Envy 14 and months ago I got the message "Hard Drive failure imminent".
    Well, the HD finally stopped working and I got a Kingston ssd hyperx 240gb to replace it.
    I have the HP recovery disks, so I tried to recover my system with them. The 6 disks are used to creat an image and then I have to click "continue" in order to re-initiate the sytem. Then, I get the usual HP start up screen, so I hit enter. Then, I get a black screen (screen is on) and nothing happens. I've done this 4 times and always get the same black screen at the end.
    Any suggestions to solve this problem?
    Many thanks.

    Hi
    At this point you may consider contacting Kingston to ask them why your SSD is not running after POST when clearly Windows is installed .
    Checkurtech
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****

  • Black or blank screen with blinking cursor after entering Windows password

    This document pertains to all HP computers and tablets with Windows 7 and Windows 8 (8.1).
    You can also link directly to this document at this URL
    http://support.hp.com/us-en/document/c04572861 
    Use the following steps if your computer stops at a black screen with a blinking cursor after entering the Windows password.
    On the black screen, press Ctrl, Shift, ESC to open the Task Manager window.
    note:     If the Task Manager window does not open, see Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot.
    Click the Process tab.
    Look for one or both of the following tasks:
    Run Once Wrapper
    Run Once Wrapper (32-bit)
    Right-click the task, and then click the End task button. Windows should start normally.
    On the Windows 8 start screen type Control Panel then click Control Panel in the search results. In Windows 7, click Start then type Control Panel, then click Control Panel in the search results.
    From the Windows Control Panel, go to Programs and Features or Add/Remove Programs.
    Remove any of the following programs. Additionally, remove any other suspected programs that are not listed.
    Remove these suspected programs:
    Binkiland
    SevenZip
    Unchecky
    Image Repair
    SolutionReal
    Vosteran
    JetClean
    Speed Browser
    Web Bar 2.0.5273.16044
    mypcbackup
    Speed Checker
    Wincheck
    Omega Plus
    Spy Clear
    Word Proser
    Optimizer Pro
    Spyware Clear with PC Tech Hotline
    WSE_Binkiland
    Pepper Zip
    Storm Watch
    WSE_Taplika
    Pro PC Cleaner
    Strong Signal
    WSE_Vosteran
    Safe Search
    Taplika
    To resolve all other black/blank screen issues at boot, see Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot.
    To resolve virus and malware issues, see About Spyware, Adware, and Browser Hijacking Software and Using Windows 8 Defender to Prevent Virus and Spyware Problems
    I work for HP, supporting the HP Experts who volunteer their time and technical knowledge to help others.

    This is not what happens.  The screen goes black, no curser or anything, then it comes right back on to the same page I was on when it went out.  It doesn't happen when I login, it happens as I am on a webpage or playing a online game.

  • Windows 8 HP Pavilion dv7-4285dx Upgrade results in black screen after intallation finalizes.

    I have a 2011 HP Pavilion dv7-4285dx with Windows 7 64 bit Home premium installed.  The notebook/laptop has a AMD Radeon HD 6300M series display adapter with driver version 9.2.2.0 dated 9/27/2012 and an ATI technologies Intel HD Graphics display adapter with driver version 8.7771.1.0.  The notebook/laptop has not had a hardware upgrade and contiains the orignal factory OS. BIOS is current to latest available.
    The issue I had while upgrading to Windows 8 is after the install finalizes (settings and preferences are entered) and the system boots to the tiles screen, the display works fine.  Clicking to the desktop works only for a few moments before the screen goes dark. Pressing the power button and/or closing/opening the lid results in at times a black screen (no power to the screen) or black screen (power to the screen) or a black screen where only the mouse pointer is visible and moves around the screen.  Restarting the computer results in a repeat of the issue at times while other times it will boot directly to what appears to be the windows desktop. You can interact with the file folder icon on the task bar as well as internet explorer, and you can get the charms bar and tile screen. Any attempt to open computer management or any control panel or task manager will open the window as an icon on the task bar.  You can mouseover the icon to "preview" a small version of the window but you can not click on it to maximize.
    I attempted the following workarounds:
    1) Clean install of Windows 8: Installs but fails with same result as above
    Refresh PC from windows 8 rescue media: Works slightly longer until AMD driver fails and then reverts to situation above. 
    2) Uninstalling all display adapters (via computer management) and then upgrading to Windows 8: Results in microsoft drivers getting installed, works much as refresh above until AMD driver fails and then reverts to above situation.
    3) In Scenarios 1 and 2,  I also tried to use windows update within Win8 to update the drivers there are updated MS drivers available ,(dated as late as 10/27/2012) but intalling those drivers also resulted in a failure of the adapter within a short period of time as did NOT updating the drivers.
    4) Disabling display adapters and then restarting:  Results in a BSOD (Blue Screen) IRQL_NOT_LESS_OR_EQUAL Stop: 0x0000000A error during boot as the OS runs into trouble with the driver before Windows 7 boots.  This happens if one or both drivers are disabled.
    5) Disabling display adapters before in-place upgrade to Windows 8 results in the Windows 8 equivalent of a BSOD and results in the system shutting down and then reverting to Windows 7.
    Through research, I determined some ppl had luck connecting another monitor/HD TV through VGA/HDMI and then using the function-screen button to switch, with my system this resulted in the same issue displayed on the TV/Monitor. There are also updates to ATI and Catalyst center available including drivers and installing these do not remedy the issue. Intel was checked and there are no drivers available as HP uses a "custom" driver for intel.  Attempting to install any of these Intel drivers will result in a fail with a compatiblity error.
    Windows 8 has no safe mode ability from the windows 8 rescue media disk, you cannot F-8 as you could in the preview. Safe mode must be reached via charms, settings, startup and then selecting safe mode as a boot option, which is not available as the display adapter malfunctions.  In those scenarios where I was able to get a windows desktop to boot up as in the first paragaph I can get to the restart settings via charms, but clicking to bring up the restart menu requires another window to open which is only visible as a "preview" on the windows task bar.
    if you are going to attempt to try any of these,
    1) Use a third party software to image your pre-win 8 upgrade system that you can boot into from USB or CD;
    2) Before starting the process, disable the UAC prompt and remove any passwords from logon, as those things will require you to interact with the OS and you will not be able to do this when the adapters fail.  The screen will shadow out as it usually does but the prompt will not be viewable.
    3) Create an ISO image of the Win8 install media and write down the product key. If you are able to get a successful boot, before the drivers fail, create a Windows 8 rescue media disk.
    I spoke with HP tech support this morning (10/29/2012) they are aware of the issues and they lie with the display adapters.  They are working toward a solutuion but there are none available at this time and no date when they will be available.  They recommend checking the support website and having the web page autoscan your PC as the drivers will show there when they are posted and they will be installable from Windows 7 so there will be no issue with upgrading to Windows 8.  Bottom line, do not upgrade to Windows 8 at this time.
    MS Tech support escalation tier reps also informed me there is no present workaround available.
    Hope this helps and saves somebody some time!
    JJ

     My laptop sat at BestBuy from Friday night until today (10-31-12)! They couldn't figure out how to fix the problem so I finally told them to revert my latop back to Windows 7! I hope HP reads these and will hurry up and make the updates needed so that I can run Windows 8 on my Laptop! I just bought mine in July of last year there is nothing wrong with it and after dropping about $1200.00 for my dv7-4285dx along with the Best Buy Geek Squad package I do not feel like having to drop more money into another laptop!! PLEASE HURRY AND FIX THIS I DIDN"T DROP $69.99 plus tx to not be able to use Windows 8! Even before I did the upgrade I had the GEEk Squad check to make sure I could make the upgrade and was told this laptop well surpasses the required minium to run Windows 8!!!!!!

  • HT1492 windows 7 boot camp black screen after install

    Hi,
    I have installed bootcamp on a 2010 white macbook with os 10.7
    Windows 7 was install all the updates for apple and windows where completed. Everything was looking good and running great. This is my work computer and it has run boot camp previously on another macbook with the same specs.
    When I restarted the computer to comfirm that all was good with both partitions the mac is running great, but the windows just locks on the black screen, no cursor, no windows starting.
    I tried to start with the install disk in but after the black and white instruction screen the computer went back to the black screen.
    I deleted the windows partition and tried to re-install but just got the black screen straight away and it will not even load.
    When i did this I noticed that Parallels had been install on the computer I tried to start it and the windows 7 is asking for the install disk to be inserted and restarted to fix problems. I insert the disk and tried to restart but nothing happened again.
    Any help would be greatly appreciated. As i need to do school reports over the next week!
    Thanks LC

    Did you create a snapshot of Windows in Parallels to fall back onto if it won't work?
    It sounds like to me you didn't pass validation, did you ignore those warning bubbles in the bottom corner?
    Take the machine to a local PC/Mac geek and have them find the problem, it's too involved to go into here.

Maybe you are looking for