R7 250 2GD3 problem

is the R7 250 2GD3 compatible with the motherboard msi 760GM-E51?

probably, but have a ask msi here: >>How to contact MSI.<<

Similar Messages

Enterprise 250 server problem

Hi,
I have sun etnerprise 250 server. When I start the server power is on, but its not showing any display on monitor. I think I have to reset my bios setup. how can reset the bois setting. Could any one tell how to reset this bios setup? If this problem is related to any other issue please let me.
1) If I start the bootable OS system will it work?
Thanks,

Here is your system's resource page in the Sun System Handbook (the "SSH").
http://sunsolve.sun.com/handbook_pub/Systems/E250/E250.html
There is a link on that page for "Related Documentation", where you'll find all the manuals.
There is no "bios" on a Sun SPARC-based system. Review the manuals.
The low level hardware layer is an OpenBoot environment, a.k.a. OBP.
The default output device is never a monitor, but is to the primary serial port (TTYa),
via a serial communications link to another computer -- think Hyperterminal.
Even if this particular system had been reconfigured to work with a Sun video card and a Sun monitor,
you must have a Sun keyboard/mouse kit plugged in for output to go to the screen.
No keyboard and/or no mouse? No signal to the monitor.
Additionally, if you've turned the keyswitch to the diagnostic position,
you force output to the TTYa port instead of any monitor, in a failsafe fashion.
Spend some time with the E250's manuals.

Toshiba E-Studio 250 FAX PROBLEMS

Hi!
I don't know if this is the place to poste my problem......
I have a Toshiba E-Studio 250, and i have a fax problem.
I have a fax / tel connection from (RDS&RCS - my local provider)
Now, my problem:
When i'am reciving a FAX - my "PHONE LED" is flashing for several seconds and nothing happens.
When i'am sending a FAX same old story, the "PHONE LED" is flashing and nothing happens.
If i push the "MONITOR" button, i hearing the fax tone.
My Toshiba has a "LINE" jack so i split the cable in two - 1 cable goes to the phone and the other in the Toshiba.
Hope you understand my english, is not that good. Thank You an Please HELP! (I'am desperate)

Hi
This is a forum about notebooks issues and options & accessories issues.
So dont think if someone would be able to help you here but I found a user manual for the E-Studio 250
http://www.toshiba-sa.net/download_operator_manuals/e160_200_250/e-STUDIO_160_200_250_Operators_Manual.pdf
Here you can find the Toshiba Support page for Print, Copy, Fax, Scan, and eMail devices
https://electronicimaging.toshiba-europe.com/

WLC Version 7.0.250.0 Problems

I just wanted to warn that I have had serious problems with version 7.0.250.0 and have had to roll back to 7.0.240.0 on all controllers.
Initial testing on a WiSM v1 seemed ok (an upgrade fron 7.0.235.3). Still have one WISM controller working fine on this version with no issues at all.
Roll out to other WISM v1, 5508, 2500 and 3750G integrated controllers saw almost complete unusable wireless connections from almost all Windows clients (Intel 3945 6100 6200 6300 nics) attached to a WPA2 AES network with 802.1x + CCKM. Mixture of APs but mostly 1142N and 3502. MFP disabled due to previous intel client issues.
Main crux of the problems were drops in connection and when connected slowed to a complete crawl. Data transfer speeds were less than a few kb/s when they were associated at m15 speed!. I also had one controller put all a/n access points on the same channel when DFS was enabled.
All metrics seemed fine on the client RSSI/SNR etc could not see anything obvious at all.
A roll back immediately solved all problems.I was unable to log a TAC case at the time to investigate due to the severity of the issue.

It seems we also have this issue with 3502 AP and WiSM1. The previously smooth working 14.x (year 2011) drivers from Intel with an Intel 6305 card don't anymore correctly work now. Controller doesn't show much. If I "troubleshoot" the client in Prime and collect the logfiles, then I get this all the time:
2014-May-28, 16:17:53 CEST
INFO
172.16.102.11
2c:3f:38:5a:b5:70, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0
2014-May-28, 16:17:53 CEST
INFO
172.16.102.11
2c:3f:38:5a:b5:70, 2, 0, 0, 0, 0, 0, 0, 0
2014-May-28, 16:17:53 CEST
INFO
172.16.102.11
2c:3f:38:5a:b5:70, 2, VO:0, VI:0, BE:41, BK:0
2014-May-28, 16:17:53 CEST
INFO
172.16.102.11
2c:3f:38:5a:b5:70, 2, VO:0:0, VI:0:0, BE:39:0, BK:0:0
2014-May-28, 16:17:53 CEST
INFO
172.16.102.11
2c:3f:38:5a:b5:70, 2, 2
2014-May-28, 16:17:53 CEST
INFO
172.16.102.11
2c:3f:38:5a:b5:70, 2, 58, 58, 58, 58, 58
2014-May-28, 16:17:53 CEST
INFO
172.16.102.11
2c:3f:38:5a:b5:70, 2, VO_INNER_DSCP:0, SIG_INNER_DSCP:0, BE_INNER_DSCP:31, OTHER_INNER_DSCP:0,VO_OUTER_DSCP:0, SIG_OUTER_DSCP:0, BE_OUTER_DSCP:31, OTHER_OUTER_DSCP:0
2014-May-28, 16:17:53 CEST
INFO
172.16.102.11
2c:3f:38:5a:b5:70, 2, VO_INNER_DSCP:0, SIG_INNER_DSCP:0, BE_INNER_DSCP:39, OTHER_INNER_DSCP:0,VO_OUTER_DSCP:0, SIG_OUTER_DSCP:0, BE_OUTER_DSCP:39, OTHER_OUTER_DSCP:0
2014-May-28, 16:17:53 CEST
INFO
172.16.102.11
Active calls on ''{0}, radio {1}'': {2} 2c:3f:38:5a:b5:70, 2, 0
2014-May-28, 16:17:58 CEST
INFO
172.16.102.11
2c:3f:38:5a:b5:70, 2, 0, 0, 0, 0, 0, 0, 0, 0, 0
2014-May-28, 16:17:58 CEST
INFO
172.16.102.11
2c:3f:38:5a:b5:70, 2, 0, 0, 0, 0, 0, 0, 0
2014-May-28, 16:17:58 CEST
INFO
172.16.102.11
2c:3f:38:5a:b5:70, 2, VO:0, VI:0, BE:32, BK:0
2014-May-28, 16:17:58 CEST
INFO
172.16.102.11
2c:3f:38:5a:b5:70, 2, VO:0:0, VI:0:0, BE:20:1, BK:0:0
2014-May-28, 16:17:58 CEST
INFO
172.16.102.11
2c:3f:38:5a:b5:70, 2, 0
2014-May-28, 16:17:58 CEST
INFO
172.16.102.11
2c:3f:38:5a:b5:70, 2, 58, 58, 58, 58, 58
2014-May-28, 16:17:58 CEST
INFO
172.16.102.11
2c:3f:38:5a:b5:70, 2, VO_INNER_DSCP:0, SIG_INNER_DSCP:0, BE_INNER_DSCP:16, OTHER_INNER_DSCP:0,VO_OUTER_DSCP:0, SIG_OUTER_DSCP:0, BE_OUTER_DSCP:16, OTHER_OUTER_DSCP:0
2014-May-28, 16:17:58 CEST
INFO
172.16.102.11
2c:3f:38:5a:b5:70, 2, VO_INNER_DSCP:0, SIG_INNER_DSCP:0, BE_INNER_DSCP:19, OTHER_INNER_DSCP:0,VO_OUTER_DSCP:0, SIG_OUTER_DSCP:0, BE_OUTER_DSCP:19, OTHER_OUTER_DSCP:0
2014-May-28, 16:17:58 CEST
INFO
172.16.102.11
Active calls on ''{0}, radio {1}'': {2} 2c:3f:38:5a:b5:70, 2, 0
Upgrading the Intel drivers to a paket later 16.7 seems to fix the issues, but it's still not nice that this problem is new with this release.

Toshiba Gigastore 250 GB: Problems to delete files

Dear all,
I can't delete files from my Toshiba Gigastore anymore. Every time I try, the following message appears: "Cannot delete. Access denied. Source is probably still open".
However, the files are not in use when I try to delete. I tried to delete after a reboot, and tried as admin. Nothing works.
The problem started to occur after the Gigastore got disconnected from the computer (hot plugout).
My OS is W2K SP4 (with the latest security updates). The GigaStore didn't run properly from the beginning, as it is not possible to disconnet the USB when the system is running (this problem is known and described in the user manual).
Howe can I overcome the problem without reformatting the drive? Maybe it is possible to boot linux and delete files on the GigaStore? Is that advisable, as linux doesn't seem to go along well with NTFS?
Many thanks in advance,
Led
Keywords: Toshiba Multi Media Center Gigastore 250 GB, delete, file in use, Windows 2000 SP4

Hello,
many thanks for your advice. The issue is solved now.
Going through your replies, I investigated why the files could not be deleted. I found that something happened with my user rights since the hot plugout: The system just 'took' the 'write' rights from existing files. However, I was able to read and execute existing files, and write _new_ files.
A subsequent login as Admin with re-assignment of 'write' rights worked fine. (However, I am sure that I have tried this earlier, but it did not work at the time).
Again, many thanks for your help. Best regards,
Led

HP 250 G3 - problems with Windows 10 boot

I have problems with Windows 10 boot on my HP 250 G3. It often shutdown during boot. But boot is ok with Windows 8.1. Please release upgrade that solve this problem.

SomeoneWithAnHP wrote:
Guys this might be solution: Turn off your laptop. Disconnect all devices connected to the PC. Remove battery and disconnect from wall. Press the power button at least 20 seconds. Connect back battery and turn on your PC. It should be fixed by now, I did with my Pavilion 14, and both sleep and turning off problems were fixed.re: Black Screen and Dead keyboard after locking computer. I tried this with my Envy 17t-3200 3D CTO. Didn't help. for this computer this means removing the back cover and unplugging the battery wiring harness form the Motherboard. I currently have sleep mode disabled when on AC and am still getting the black screen, dead keyboard lockup. I really know I'm hosed since even the caps-lock is non-functional. I see this problem more when I'm at work were I tend to Win-L lock the screen when I walk away from my desk. Seems like locking the computer then letting the screen blank is doing something evil. After I force a reboot, by keyboard backlight forgets it's setitngs and returns to full brightness. If I lock the screen then bring back the computer before the screen is blanked, it seems fine. I don't think there's any way to adjust the screen blanking when the lock screen is up (even my desktop power-saves the monitors after a few minutes on the Lock screen). I'm not sure it's HP or MS that should be looking into this. My computer is about 3 years old so I can't pester HP with warranty requests. I'm not sure how prevelant this problem is. Are all Pavellions and Envy's having the problem? Mine has Radeon graphics which was a bit unusual at the time. I have to install the HP Display driver before any AMD updates or the screen dimming doesn't work (at least with win 7 and 8). Dave.

MSI k8n NEO NF3 250 Platinum Problem

Wacked all my gear in there.. bare minimum, Msi K8N Platinum NF3 250gb, amd 64 newcastle, matrox parhelia 128 retail, samsung spinpoint 160 ata133 and 1.5gb 2700 ddr and it wont boot, i get as far as the old windows "safe mode, safe with promps... windows normally screen" then wen i hit it it goes back to the platinum splash screen, wen i go to boot in safe it stops dead at trying to load viaagp1.sys..
any suggestions.. and im not going to do anything like reformat as i need some of the stuff on teh hdd.. any help would be great
i do alologise if this is in the wrong section.

A full format is your best option.... A repair MIGHT do the job, but I wouldn't count on it's stability / performance afterwards.
If you really need your old data, "resurrect" your old rig outside it's case & back up your stuff - then do the Big Wipe!

Need UEFI Bios for my MSI R7 250 2GB OC Video Card

Hello Need a UEFI Bios for my MSI Video Card R7 250 2GD3 OC
Serial Number: 602-V301-04SB1309065283

use this one https://forum-en.msi.com/index.php?topic=174255.msg1265552#msg1265552

Problem: analysis with essbase data

Hi experts, I have essbase multidimensional database.
So practically I don't use my oracle administration.
I can see some weird in answers page when I want to do an analysis.
If I select my dimensions and a measure I can see some data and works fine.
For example:
YEAR GEN1 - PERIOD GEN1 - PERIOD GEN2- Measure
2010- PERIOD- MONTHLY- 250
2010- PERIOD- CUMULATIVE- 250
My problem is if I filtered in my measure some dimension.
YEAR GEN1 - PERIOD GEN1 - PERIOD GEN2- Measure FILTERED by GEN2='MONTHLY' - Measure FILTERED by GEN2='CUMULATIVE'
I expected next result:
2010- PERIOD- MONTHLY- 250 - (blank)
2010- PERIOD- CUMULATIVE- (blank) - 250
But I see this result
2010- PERIOD- MONTHLY- (blank) - (blank)
So I can't filtered my measures
Any help?
Thanks!!

Hi Dhar!
This is XML code of my analysis:
<saw:report xmlns:saw="com.siebel.analytics.web/report/v1.1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlVersion="201008230" xmlns:sawx="com.siebel.analytics.web/expression/v1.1">
<saw:criteria xsi:type="saw:simpleCriteria" subjectArea=""OBI_ACTI"">
<saw:columns>
<saw:column xsi:type="saw:regularColumn" columnID="c4bf3a8497e63f8ab">
<saw:columnFormula>
<sawx:expr xsi:type="sawx:sqlExpression">"Año"."Gen2,Año"</sawx:expr></saw:columnFormula></saw:column>
<saw:column xsi:type="saw:regularColumn" columnID="c2c5abbacfab55a66">
<saw:columnFormula>
<sawx:expr xsi:type="sawx:sqlExpression">"Período"."Gen2,Período"</sawx:expr></saw:columnFormula></saw:column>
<saw:column xsi:type="saw:regularColumn" columnID="c1ab901b03bc40bf6">
<saw:columnFormula>
<sawx:expr xsi:type="sawx:sqlExpression">"Período"."Gen3,Período"</sawx:expr></saw:columnFormula></saw:column>
<saw:column xsi:type="saw:regularColumn" columnID="c2b4e4457d2772c76">
<saw:columnFormula>
<sawx:expr xsi:type="sawx:sqlExpression">FILTER("Measures"."value" USING ("Escenario"."Gen2,Escenario" = 'Real'))</sawx:expr></saw:columnFormula>
<saw:tableHeading>
<saw:caption fmt="text">
<saw:text>Measures</saw:text></saw:caption></saw:tableHeading>
<saw:columnHeading>
<saw:caption fmt="text">
<saw:text>Real</saw:text></saw:caption></saw:columnHeading></saw:column>
<saw:column xsi:type="saw:regularColumn" columnID="c22300e3c1d0f87c7">
<saw:columnFormula>
<sawx:expr xsi:type="sawx:sqlExpression">FILTER("Measures"."value" USING ("Escenario"."Gen2,Escenario" = 'Ppto_Def'))</sawx:expr></saw:columnFormula>
<saw:tableHeading>
<saw:caption fmt="text">
<saw:text>Measures</saw:text></saw:caption></saw:tableHeading>
<saw:columnHeading>
<saw:caption fmt="text">
<saw:text>Ppto</saw:text></saw:caption></saw:columnHeading></saw:column></saw:columns></saw:criteria>
<saw:views currentView="0">
<saw:view xsi:type="saw:compoundView" name="compoundView!1">
<saw:cvTable>
<saw:cvRow>
<saw:cvCell viewName="titleView!1">
<saw:displayFormat>
<saw:formatSpec/></saw:displayFormat></saw:cvCell></saw:cvRow>
<saw:cvRow>
<saw:cvCell viewName="tableView!1">
<saw:displayFormat>
<saw:formatSpec/></saw:displayFormat></saw:cvCell></saw:cvRow></saw:cvTable></saw:view>
<saw:view xsi:type="saw:titleView" name="titleView!1"/>
<saw:view xsi:type="saw:tableView" name="tableView!1">
<saw:edges>
<saw:edge axis="page" showColumnHeader="true"/>
<saw:edge axis="section"/>
<saw:edge axis="row" showColumnHeader="true">
<saw:edgeLayers>
<saw:edgeLayer type="column" columnID="c4bf3a8497e63f8ab"/>
<saw:edgeLayer type="column" columnID="c2c5abbacfab55a66"/>
<saw:edgeLayer type="column" columnID="c1ab901b03bc40bf6"/>
<saw:edgeLayer type="column" columnID="c2b4e4457d2772c76"/>
<saw:edgeLayer type="column" columnID="c22300e3c1d0f87c7"/></saw:edgeLayers></saw:edge>
<saw:edge axis="column"/></saw:edges></saw:view></saw:views></saw:report>
The problem is if column VALUE is filtered by a dimension it works...but if I add another column value and I filter with another member of dimension, all values dissapear.
This is the result:
http://imageshack.us/photo/my-images/855/resultmd.jpg/
And it's wrong because exists data in this scenarios....
Which is the problem?
Thanks!

UEFI GOP for MSI R7 250

Requesting UEFI GOP support BIOS update for MSI R7 250 video card.
Mode number: R7 250 2GD3 OC
Serial number: 602-V301-04SB1309062734
Thank you.

here it is

What should I do; My Macbook Pro Retina 13" performing worse after a visit to the Genius Bar.

To give a little background; my MacBook is my baby. I keep it as safe and clean as I possibly can. The only damage that has come to it is a tiny dent in the left corner of the screen, when my little sister took it, ran, and dropped it on a wooden floor. It's my pride and joy, and I would never mistreat my computer. I don't loan it to friends, I always know where it is, and I do my best to keep it from dying. The only thing I do which is problematic is not shutting it down often enough; I usually keep it on for days at a time, I don't sleep much and spend a lot of time on my computer, but for such a high price, I was expecting that it could handle it. Onto the problem.
My computer was having minor problems with the trackpad and keyboard and had been since I'd bought it, but I hadn't been noticing it much until recently. I remember my mom pointed it out when I first got it and I told her she was crazy. I suspected a little hardware problem that my AppleCare would cover. When I went in to the Genius Bar, they opened up my computer and told me I had serious water damage. I was shocked as I'd never brought my computer close to water; I don't bring it in the bathroom, so no condensation, I have never spilled on it, I don't usually eat or drink around it, etc. I was given very minimal detail or explanation, simply told over and over that it was water damage, and they told me my AppleCare had been deactivated, which made me even MORE upset. The store told me it would cost almost $1000 to fix, at which point I was about to cry since that's almost the cost of my computer. I was going to wait until I got home to get an opinion from my hometown Apple Store, as they've known me for a long time and I was upset with the unhelpful service at the Genius Bar around my college.
My current problem is that I don't think I can wait until May. My computer has been acting up ever since the Genius Bar visit earlier this month, my screen is shaking and the color is going in and out, sound is acting strangely, and I'm really, really upset since none of these problems existed before my visit. I didn't feel it was a problem until recently, since it was pretty scattered and I felt like if I ignored it until I got home in mid-May, I could get it fixed then. Now, I feel as though something was jostled or screwed with while they were checking my computer and it's causing me a lot of problems, problems that are interfering with my use of this otherwise awesome device. I really love my MacBook, it's the best computer I've had, but I am at my wits end.
AppleCare is insurance, and I don't understand how they could take it away for something that I have no control over. When I bought AppleCare, I was told it would cover any damage that happened to the hardware or software of my computer, which is the whole reason I bought it! I wouldn't have wasted money on it if I knew this was a way to take the responsibility of fixing my computer away from Apple! I am beyond angry with the service I received, the "rules" of AppleCare, and the performance of my computer after the visit. I can barely type this since my screen refuses to stay still or one color! I was having absolutely no screen problems before this visit!!!
This is my last resort; I may return to the Genius Bar sometime next week for a reassessment. I am extremely upset with the service I have received and the new problems arising. This computer is barely seven/eight months old. It should NOT be having these problems. I can't help but think it was a manufacturing error and I was given an incorrect diagnosis. As a final, desperate cry for help, I thought I'd turn to the support forum for advice; is there anything you guys think I should be doing or any way I can possibly fix this problem myself/without Apple since apparently I have no insurance even though I paid $250 for problems like this to be covered?

Welcome to Apple Support Communities
Hold the Power button until your Mac turns off, and turn it on again. As you tried to install a firmware update, plug the MacBook to its charger before turning it on.
Note that firmware updates are installed in the next startup, so don't worry about this, as the update hasn't been installed yet.
Respecting to other freezes, it may indicate a hardware problem. Check if the same freezes happen in the future

System will not fully boot to display desktop

I HAVE A IMAC MID 2007 INTEL CHIP 2GIG RAM 250 HD, PROBLEM STARTED A FEW DAYS AGO WHEN I WAS UNABLE TO LOGIN INTO MY USER ACCOUNT, OTHER USERS WERE ABLE, CHATING WITH APPLE I DID EVERYTHING POSSIBLE, CHANGED PASSWORD, RESET, NVRAM,, SAFE MODE, NOTHING WORKED, PERMISSIONS, SO I RE-INSTALLED THE OS 10.10, TWICE . AFTER THE INSTALL THE SYSTEM WORK GREAT FAST AND NO ISSUES, UNTIL TO LOG OFF AND SHUT DOWN,
UPON RESTART THE SYSTEM GOES INTO THE NORMAL START UP THE APPLE ICON WITH GRAY SCREEN APPEARS THE BAR RUNS ACROSS THE SCREEN AND THEN THE SCREEN GOES TO A DARK BLUE WITH THE GRAY WHEEL SPINNING, AND SPINNING IT WILL NOT LOAD. I AM ALSO UNABLE TO START IN SAFE MODE.
I HAVE DONE ALL THAT I CAN THINK OFF, HAVE I MISSED SOMETHING? IS THE START UP COMMAND LINE BAD??
BEFORE GOING TO APPLE ANY LAST IDEA'S ?????

Please do not type in all capital letters, that is like shouting and we can hear you just fine. Run Apple's Hardware Test in extended mode 2-3 times, you will need the original install discs that came with the computer 8 years ago to run AHD. The reason to run AHT multiple time is it does not always find errors after the 1st or 2nd pass, however when it does they are correct. Also 2GB of RAM is the minimum specifications to run Yosemite, you should upgrade the RAM to 6GB, the maximum a 2007 can accommodate, if you decide to upgrade the RAM purchase only Crucial or OWC (www.macsales.com), in both case ONLY purchase direct from the vendor.

WD Java Migration error

Hello all,
I'm facing a 700 to 730 migration and I'm having some problems with some (not all) WD Java migration. Steps I'm following:
Development Infraestructure perspective > DC > Sync / Create Project > Create Project
The system detects that it's an older version and gives me the option Migrate Projects > Next
Migration Summary:
Total projects migrated 1
Projects migrated with warnings 1
Migration Details:
Started migration for project DEP_TRACK_Dzhratse_ndp~diba.com OK
Migrating all of the controller's context in Web Dynpro project OK
If there are build errors in Web Dynpro Project after migration,this might be due to internal API usages (see SAP Note 928485) For migrating internal API usages -> In Web Dynpro Explorer, right click on Project Node and choose Repair->Internal API Usages
Web Dynpro perspective > Project > Rebuild, and yes, there are build errors:
MessageManager cannot be resolved to a type     ATSE_ProPer.java     /DEP_TRACK_Dzhratse_ndp~diba.com/gen_wdp/packages/realtech/com/atse/wdp     line 159     Java Problem
MessageManager cannot be resolved to a type     ATSE_ProPer.java     /DEP_TRACK_Dzhratse_ndp~diba.com/gen_wdp/packages/realtech/com/atse/wdp     line 159     Java Problem
MessageManager cannot be resolved to a type     ATSE_ProPer.java     /DEP_TRACK_Dzhratse_ndp~diba.com/gen_wdp/packages/realtech/com/atse/wdp     line 482     Java Problem
MessageManager cannot be resolved to a type     ATSE_ProPer.java     /DEP_TRACK_Dzhratse_ndp~diba.com/gen_wdp/packages/realtech/com/atse/wdp     line 662     Java Problem
MessageManager cannot be resolved to a type     ATSE_ProPer.java     /DEP_TRACK_Dzhratse_ndp~diba.com/gen_wdp/packages/realtech/com/atse/wdp     line 722     Java Problem
MessageManager cannot be resolved to a type     ATSE_ProPer.java     /DEP_TRACK_Dzhratse_ndp~diba.com/gen_wdp/packages/realtech/com/atse/wdp     line 793     Java Problem
MessageManager cannot be resolved to a type     ATSE_ProPer.java     /DEP_TRACK_Dzhratse_ndp~diba.com/gen_wdp/packages/realtech/com/atse/wdp     line 795     Java Problem
MessageManager cannot be resolved to a type     ATSE_ProPerMainView.java     /DEP_TRACK_Dzhratse_ndp~diba.com/gen_wdp/packages/realtech/com/atse/wdp     line 129     Java Problem
MessageManager cannot be resolved to a type     ATSE_ProPerMainView.java     /DEP_TRACK_Dzhratse_ndp~diba.com/gen_wdp/packages/realtech/com/atse/wdp     line 129     Java Problem
MessageManager cannot be resolved to a type     ATSE_ProPerMainView.java     /DEP_TRACK_Dzhratse_ndp~diba.com/gen_wdp/packages/realtech/com/atse/wdp     line 563     Java Problem
MessageManager cannot be resolved to a type     ATSE_ProPer_PermanenciaView.java     /DEP_TRACK_Dzhratse_ndp~diba.com/gen_wdp/packages/realtech/com/atse/wdp     line 119     Java Problem
MessageManager cannot be resolved to a type     ATSE_ProPer_PermanenciaView.java     /DEP_TRACK_Dzhratse_ndp~diba.com/gen_wdp/packages/realtech/com/atse/wdp     line 119     Java Problem
MessageManager cannot be resolved to a type     ATSE_ProPer_PermanenciaView.java     /DEP_TRACK_Dzhratse_ndp~diba.com/gen_wdp/packages/realtech/com/atse/wdp     line 229     Java Problem
MessageManager cannot be resolved to a type     ATSE_ProPer_PermanenciaView.java     /DEP_TRACK_Dzhratse_ndp~diba.com/gen_wdp/packages/realtech/com/atse/wdp     line 235     Java Problem
MessageManager cannot be resolved to a type     ATSE_ProPer_PermanenciaView.java     /DEP_TRACK_Dzhratse_ndp~diba.com/gen_wdp/packages/realtech/com/atse/wdp     line 250     Java Problem
The import com.sap.tc.webdynpro.progmodel.controller cannot be resolved     ATSE_ProPer.java     /DEP_TRACK_Dzhratse_ndp~diba.com/gen_wdp/packages/realtech/com/atse/wdp     line 43     Java Problem
The import com.sap.tc.webdynpro.progmodel.controller cannot be resolved     ATSE_ProPerMainView.java     /DEP_TRACK_Dzhratse_ndp~diba.com/gen_wdp/packages/realtech/com/atse/wdp     line 33     Java Problem
The import com.sap.tc.webdynpro.progmodel.controller cannot be resolved     ATSE_ProPer_PermanenciaView.java     /DEP_TRACK_Dzhratse_ndp~diba.com/gen_wdp/packages/realtech/com/atse/wdp     line 26     Java Problem
Then I do what he said:
Web Dynpro perspective > Project > Repair > Internal Web Dynpro API Usages
Web Dynpro perspective > Project > Rebuild
And right now, everything is ok! No more errors in the Web Dynpro project code...
Right now, I should deploy it, right?
Web Dynpro perspective > Project > Deploy > Make consistent first (Create Archive) > OK
And then an error occurs:
Build
zhr/atse_ndp diba.com The Build terminated with errors
Archive file ' DEP_TRACK_Dzhratse_ndpdiba.com gen default deploy diba.comzhr~atse_ndp.ear' not found. Check the problems view for error messages and create a new archive.
Any idea?
Thanks!!!

[wdgen] [Info]    Generating packages/realtech/com/atse/wdp/wdp/ResourceATSE_ProPer.properties
     [wdgen] [Info]    Catching throwable null
     [wdgen] [Info]    java.lang.reflect.InvocationTargetException
     [wdgen]      at sun.reflect.GeneratedMethodAccessor30.invoke(Unknown Source)
     [wdgen]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     [wdgen]      at java.lang.reflect.Method.invoke(Method.java:597)
     [wdgen]      at com.sap.ide.generationfwk.task.GenerationTaskJavaMethod.executePersistent(GenerationTaskJavaMethod.java:139)
     [wdgen]      at com.sap.ide.generationfwk.GenerationBase.doPersistentGeneration(GenerationBase.java:207)
     [wdgen]      at com.sap.ide.generationfwk.GenerationBase.doPersistentGeneration(GenerationBase.java:164)
     [wdgen]      at com.sap.ide.webdynpro.generation.Generation.doPersistentGenerationForComponentDefaultResource(Generation.java:541)
     [wdgen]      at com.sap.ide.webdynpro.generation.Generation.doPersistentGenerationForComponentResources(Generation.java:3188)
     [wdgen]      at com.sap.ide.webdynpro.generation.Generation.doPersistentGenerationForComponentRecursively(Generation.java:1788)
     [wdgen]      at com.sap.ide.webdynpro.generation.Generation.generateComponentsForArchive(Generation.java:2660)
     [wdgen]      at com.sap.ide.webdynpro.generation.Generation.generateMDOsForArchive(Generation.java:2604)
     [wdgen]      at com.sap.ide.webdynpro.generation.Generation.generatePersistentArchive(Generation.java:1630)
     [wdgen]      at com.sap.ide.webdynpro.generation.console.GenerationConsole.generate(GenerationConsole.java:190)
     [wdgen]      at com.sap.webdynpro.generation.ant.GenerationAnt.main(GenerationAnt.java:69)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     [wdgen]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     [wdgen]      at java.lang.reflect.Method.invoke(Method.java:597)
     [wdgen]      at com.sap.webdynpro.generation.ant.WDGenAntTask.execute(WDGenAntTask.java:240)
     [wdgen]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
     [wdgen]      at sun.reflect.GeneratedMethodAccessor27.invoke(Unknown Source)
     [wdgen]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     [wdgen]      at java.lang.reflect.Method.invoke(Method.java:597)
     [wdgen]      at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
     [wdgen]      at org.apache.tools.ant.Task.perform(Task.java:348)
     [wdgen]      at org.apache.tools.ant.Target.execute(Target.java:357)
     [wdgen]      at org.apache.tools.ant.Target.performTasks(Target.java:385)
     [wdgen]      at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)
     [wdgen]      at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
     [wdgen]      at com.sap.tc.buildplugin.ant.util.AntRunner.run(AntRunner.java:115)
     [wdgen]      at com.sap.tc.buildplugin.DefaultAntBuildAction.execute(DefaultAntBuildAction.java:53)
     [wdgen]      at com.sap.tc.buildplugin.DefaultPlugin.processSequence(DefaultPlugin.java:235)
     [wdgen]      at com.sap.tc.buildplugin.DefaultPlugin.handleBuildStepSequence(DefaultPlugin.java:174)
     [wdgen]      at com.sap.tc.buildplugin.DefaultPlugin.performBuild(DefaultPlugin.java:165)
     [wdgen]      at com.sap.tc.buildplugin.DefaultPluginV3Delegate$BuildRequestHandler.handle(DefaultPluginV3Delegate.java:66)
     [wdgen]      at com.sap.tc.buildplugin.DefaultPluginV3Delegate.requestV3(DefaultPluginV3Delegate.java:48)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     [wdgen]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     [wdgen]      at java.lang.reflect.Method.invoke(Method.java:597)
     [wdgen]      at com.sap.tc.buildtool.v2.impl.PluginHandler2.maybeInvoke(PluginHandler2.java:403)
     [wdgen]      at com.sap.tc.buildtool.v2.impl.PluginHandler2.request(PluginHandler2.java:149)
     [wdgen]      at com.sap.tc.buildtool.v2.impl.PluginHandler2.build(PluginHandler2.java:87)
     [wdgen]      at com.sap.tc.buildtool.PluginHandler2Wrapper.execute(PluginHandler2Wrapper.java:59)
     [wdgen]      at com.sap.tc.devconf.internal.DCProxyMake.make(DCProxyMake.java:276)
     [wdgen]      at com.sap.tc.devconf.internal.DCProxy.make(DCProxy.java:1459)
     [wdgen]      at com.sap.tc.devconf.internal.DCProxy.make(DCProxy.java:1441)
     [wdgen]      at com.sap.tc.devconf.internal.DCProxy.make(DCProxy.java:3927)
     [wdgen]      at com.sap.ide.dii08.internal.commandz.BuildDcsCommand.build(BuildDcsCommand.java:333)
     [wdgen]      at com.sap.ide.dii08.internal.commandz.BuildDcsCommand.execute(BuildDcsCommand.java:176)
     [wdgen]      at com.sap.ide.dii08.internal.service.CommandExecutor$2.run(CommandExecutor.java:77)
     [wdgen]      at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1800)
     [wdgen]      at com.sap.ide.dii05.util.internal.lock.DiiConsistencyServiceImpl.executeConsistentWorkspaceRunnable(DiiConsistencyServiceImpl.java:90)
     [wdgen]      at com.sap.ide.dii05.util.internal.lock.DiiConsistencyServiceImpl.executeConsistentWorkspaceRunnable(DiiConsistencyServiceImpl.java:52)
     [wdgen]      at com.sap.ide.dii08.internal.service.CommandExecutor.executeInWorkspaceAndDevConfLocks(CommandExecutor.java:90)
     [wdgen]      at com.sap.ide.dii08.internal.service.InternalDiiCommandService.buildDcs(InternalDiiCommandService.java:179)
     [wdgen]      at com.sap.ide.dii08.internal.service.InternalDiiCommandService.buildDcs(InternalDiiCommandService.java:986)
     [wdgen]      at com.sap.ide.dii05.ui.internal.actions.dc.BuildAction$2.run(BuildAction.java:193)
     [wdgen]      at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
     [wdgen] Caused by: java.lang.NullPointerException
     [wdgen]      at com.sap.ide.metamodel.core.i18n.TranslatableTextProxy.getResourceType(TranslatableTextProxy.java:197)
     [wdgen]      at com.sap.ide.webdynpro.generation.runtime._Resource.vm_dumpTextPool(_Resource.java:135)
     [wdgen]      at com.sap.ide.webdynpro.generation.runtime._Resource.v_main(_Resource.java:83)
     [wdgen]      at com.sap.ide.webdynpro.generation.runtime.DefaultResource.v_main(DefaultResource.java:80)
     [wdgen]      at com.sap.ide.webdynpro.generation.runtime.DefaultResource.doGenerate(DefaultResource.java:56)
     [wdgen]      at com.sap.ide.generationfwk.velocity.runtime.CompiledTemplateBase.generate0(CompiledTemplateBase.java:232)
     [wdgen]      at com.sap.ide.generationfwk.velocity.runtime.CompiledTemplateBase.generate(CompiledTemplateBase.java:164)
     [wdgen]      ... 59 more
     [wdgen] [Info]    Generation error while processing template defaultResource
     [wdgen] [Info]    Catching throwable null
     [wdgen] [Info]    java.lang.reflect.InvocationTargetException
     [wdgen]      at sun.reflect.GeneratedMethodAccessor30.invoke(Unknown Source)
     [wdgen]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     [wdgen]      at java.lang.reflect.Method.invoke(Method.java:597)
     [wdgen]      at com.sap.ide.generationfwk.task.GenerationTaskJavaMethod.executePersistent(GenerationTaskJavaMethod.java:139)
     [wdgen]      at com.sap.ide.generationfwk.GenerationBase.doPersistentGeneration(GenerationBase.java:207)
     [wdgen]      at com.sap.ide.generationfwk.GenerationBase.doPersistentGeneration(GenerationBase.java:164)
     [wdgen]      at com.sap.ide.webdynpro.generation.Generation.doPersistentGenerationForComponentDefaultResource(Generation.java:541)
     [wdgen]      at com.sap.ide.webdynpro.generation.Generation.doPersistentGenerationForComponentResources(Generation.java:3188)
     [wdgen]      at com.sap.ide.webdynpro.generation.Generation.doPersistentGenerationForComponentRecursively(Generation.java:1788)
     [wdgen]      at com.sap.ide.webdynpro.generation.Generation.generateComponentsForArchive(Generation.java:2660)
     [wdgen]      at com.sap.ide.webdynpro.generation.Generation.generateMDOsForArchive(Generation.java:2604)
     [wdgen]      at com.sap.ide.webdynpro.generation.Generation.generatePersistentArchive(Generation.java:1630)
     [wdgen]      at com.sap.ide.webdynpro.generation.console.GenerationConsole.generate(GenerationConsole.java:190)
     [wdgen]      at com.sap.webdynpro.generation.ant.GenerationAnt.main(GenerationAnt.java:69)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     [wdgen]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     [wdgen]      at java.lang.reflect.Method.invoke(Method.java:597)
     [wdgen]      at com.sap.webdynpro.generation.ant.WDGenAntTask.execute(WDGenAntTask.java:240)
     [wdgen]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
     [wdgen]      at sun.reflect.GeneratedMethodAccessor27.invoke(Unknown Source)
     [wdgen]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     [wdgen]      at java.lang.reflect.Method.invoke(Method.java:597)
     [wdgen]      at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
     [wdgen]      at org.apache.tools.ant.Task.perform(Task.java:348)
     [wdgen]      at org.apache.tools.ant.Target.execute(Target.java:357)
     [wdgen]      at org.apache.tools.ant.Target.performTasks(Target.java:385)
     [wdgen]      at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)
     [wdgen]      at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
     [wdgen]      at com.sap.tc.buildplugin.ant.util.AntRunner.run(AntRunner.java:115)
     [wdgen]      at com.sap.tc.buildplugin.DefaultAntBuildAction.execute(DefaultAntBuildAction.java:53)
     [wdgen]      at com.sap.tc.buildplugin.DefaultPlugin.processSequence(DefaultPlugin.java:235)
     [wdgen]      at com.sap.tc.buildplugin.DefaultPlugin.handleBuildStepSequence(DefaultPlugin.java:174)
     [wdgen]      at com.sap.tc.buildplugin.DefaultPlugin.performBuild(DefaultPlugin.java:165)
     [wdgen]      at com.sap.tc.buildplugin.DefaultPluginV3Delegate$BuildRequestHandler.handle(DefaultPluginV3Delegate.java:66)
     [wdgen]      at com.sap.tc.buildplugin.DefaultPluginV3Delegate.requestV3(DefaultPluginV3Delegate.java:48)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     [wdgen]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     [wdgen]      at java.lang.reflect.Method.invoke(Method.java:597)
     [wdgen]      at com.sap.tc.buildtool.v2.impl.PluginHandler2.maybeInvoke(PluginHandler2.java:403)
     [wdgen]      at com.sap.tc.buildtool.v2.impl.PluginHandler2.request(PluginHandler2.java:149)
     [wdgen]      at com.sap.tc.buildtool.v2.impl.PluginHandler2.build(PluginHandler2.java:87)
     [wdgen]      at com.sap.tc.buildtool.PluginHandler2Wrapper.execute(PluginHandler2Wrapper.java:59)
     [wdgen]      at com.sap.tc.devconf.internal.DCProxyMake.make(DCProxyMake.java:276)
     [wdgen]      at com.sap.tc.devconf.internal.DCProxy.make(DCProxy.java:1459)
     [wdgen]      at com.sap.tc.devconf.internal.DCProxy.make(DCProxy.java:1441)
     [wdgen]      at com.sap.tc.devconf.internal.DCProxy.make(DCProxy.java:3927)
     [wdgen]      at com.sap.ide.dii08.internal.commandz.BuildDcsCommand.build(BuildDcsCommand.java:333)
     [wdgen]      at com.sap.ide.dii08.internal.commandz.BuildDcsCommand.execute(BuildDcsCommand.java:176)
     [wdgen]      at com.sap.ide.dii08.internal.service.CommandExecutor$2.run(CommandExecutor.java:77)
     [wdgen]      at org.eclipse.core.internal.resources.Workspace.run(Workspace.java:1800)
     [wdgen]      at com.sap.ide.dii05.util.internal.lock.DiiConsistencyServiceImpl.executeConsistentWorkspaceRunnable(DiiConsistencyServiceImpl.java:90)
     [wdgen]      at com.sap.ide.dii05.util.internal.lock.DiiConsistencyServiceImpl.executeConsistentWorkspaceRunnable(DiiConsistencyServiceImpl.java:52)
     [wdgen]      at com.sap.ide.dii08.internal.service.CommandExecutor.executeInWorkspaceAndDevConfLocks(CommandExecutor.java:90)
     [wdgen]      at com.sap.ide.dii08.internal.service.InternalDiiCommandService.buildDcs(InternalDiiCommandService.java:179)
     [wdgen]      at com.sap.ide.dii08.internal.service.InternalDiiCommandService.buildDcs(InternalDiiCommandService.java:986)
     [wdgen]      at com.sap.ide.dii05.ui.internal.actions.dc.BuildAction$2.run(BuildAction.java:193)
     [wdgen]      at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
     [wdgen] Caused by: java.lang.NullPointerException
     [wdgen]      at com.sap.ide.metamodel.core.i18n.TranslatableTextProxy.getResourceType(TranslatableTextProxy.java:197)
     [wdgen]      at com.sap.ide.webdynpro.generation.runtime._Resource.vm_dumpTextPool(_Resource.java:135)
     [wdgen]      at com.sap.ide.webdynpro.generation.runtime._Resource.v_main(_Resource.java:83)
     [wdgen]      at com.sap.ide.webdynpro.generation.runtime.DefaultResource.v_main(DefaultResource.java:80)
     [wdgen]      at com.sap.ide.webdynpro.generation.runtime.DefaultResource.doGenerate(DefaultResource.java:56)
     [wdgen]      at com.sap.ide.generationfwk.velocity.runtime.CompiledTemplateBase.generate0(CompiledTemplateBase.java:232)
     [wdgen]      at com.sap.ide.generationfwk.velocity.runtime.CompiledTemplateBase.generate(CompiledTemplateBase.java:164)
     [wdgen]      ... 59 more
     [wdgen] [Error]   Generation error while processing D:/Documents and Settings/corellavpd/NWDS_73.jdi/0/t/52509E1C6529CF3CE8D0B5F0D24D8066/gen_wdp/packages/realtech/com/atse/wdp/wdp/ResourceATSE_ProPer.properties (java.lang.reflect.InvocationTargetException)
     [wdgen] [Error]   Generation failed due to errors (10 seconds)
Ant runtime 24.953 seconds
Ant build finished with ERRORS
[Error]   Generation failed!
Build stopped due to an error: [Error]   Generation failed!

Please read this iTunes Devs.

For the love of God, it's impossible to find a direct feedback link on the site for iTunes, so I'm posting it here in prayer of a dev actually reading it.
/end mini-rant
I would like to have iTunes show me a column that simply displays a "Yes" or a "No" in it on each song's line, telling me whether the song has lyrics embeded in it ("Yes") or not ("No"). The reason for this is that I like to add lyrics to my songs before I put them on my iPod so I can view them on the iPod later, and with thousands of songs it gets confusing very quickly which one's I have already added lyrics to, or not, and need to.
The same request goes for album artwork. Both of them obviously would be toggle'able in the View Options along with all of the other columns.
As an addition to the above, I'd love to see a viewer pane, much like the album artwork one, that displays the lyrics embedded in a song as it plays.
My last small request is to add Mozilla Thunderbird to the list email contacts that it can import. I believe Thunderbird is now mainstream enough that it would be useful. There is currently an extension for TB that will do this, but it would be nice to not have to add extra software to my computer and have it built right into iTunes itself.
If these get added you'll automatically have my undying gratitude.
Huge bonus points if you devise a way to auto-import the correct lyrics and artwork for each and every song in the library with the click of a button within iTunes. It's a monumental task to manually do this with a 30gb full iPod.
Thanks in advance.
g5 30gb Windows XP Pro

"Widespread Horror" is a poor characterization for any of the transient problems with the iPod or iTunes (with the possible exception of the 'less than adequate' information provided about the initial iPod batteries). Even iTunes 5.0 wasn't that bad from a percentage basis, but it did spike the posts seen here for quite a while.
The iTunes and iPod programs work fantastically well on the vast majority of Windows and Apple PCs. There are over 25 million unique installations of iTunes out there and somewhat close to 45 million iPods sold to-date. Some will have problems. This is where people go to get them fixed. In the grand scheme of things, it is an extremely small percentage of users that have real problems. The ‘Law of Large Numbers’ dictates that there will, in appearance, be many people with problems. Even 1% of 25 million is 250,000 problems. If only 10% of those folks came here, we would be swamped. It’s not happening.
That said, even one glitch, when it happens to you, can be maddening...
As for why one cannot directly reach the iPod/iTunes/Apple support folks easily, consider this. A fully loaded support service will run a company at least $75/hour per employee assigned to answer phones. There's a lower limit startup/run cost, so 1 or 2 staff is not on that lower level of expense.
If you spend any time on these boards, you'll see that the majority of the problem are self-inflicted in some manner or another: Malware, viruses, poor PC upkeep, failure to read &/or understand the directions, and the like.
Apple could provide a support line for all the users, but the costs would be passed back to everyone (regardless of whether they ever used the service) in the form of higher music download prices, higher iPod prices and maybe even a charge for 'buying' iTunes.
The vast majority of users do not need these services and probably do not want to pay for the small percentage of users who do. I know I do not.
And Katrina is correct. If we see a definitive and reproducible problem with iTunes/iPod, we can directly alert the Hosts who can inform the tech support team. This has happened, but not to the extent that some of the posters would 'expect', all for the reasons I touched on above.

Freeze from Song Start instead of Meas 0?

I recorded a concert into Logic, 38 channels, 24 bit, 44.1k. I'm breaking the individual songs out that I want to fix & mix. I'm editing out the regions of each song, then turning those regions into optimized audio files to make it more manageable. We'll open the mixes in another song file, bridge them with applause, and have a nice tidy concert mix.
I want to freeze tracks as I fix them, for less CPU overhead. I want to keep the individual songs with the optimized audio files in their original position in the timeline, so I can reopen the original files and drop them in at their original record position if I mess up the optimized audio file. I've reset the start and end markers with a couple of extra measures (@ 30bpm) before and after the audio.
My problem is that when I freeze a file, it freezes from measure 0, instead of the new song start position. Consequently, it takes a long time to freeze files, and they are huge. As an example, the first song actually started at measure 250 (it was a long pre-show), and even though the lead vocal file is only 50 MB, the freeze file for it is over 400 MB and takes a very long time to create.
How do I get "freeze" to start freezing from measure 249, instead of measure 0?
If that's not an option, is there one that doesn't require relocating my regions to measure 2?
TIA.

I've done a very poor job of describing what I've done. I'll try to clarify.
I have created a new .lso of each song, drawn from the original .lso of the concert. I've even gone to the effort of copying just the portions of the audio files that are in that song (optimizing), so I have a much smaller set of the appropriate audio tracks/files that contain just the audio from that song in each .lso.
I want the audio files of each .lso to remain at their original record position, to facilitate replacing them with originals if they get messed up in editing.
The song "start" has been moved to the beginning of the the files in the timeline for each .lso. The song end has been moved to the end of each, making each new .lso about 4 minutes long, although the start marker for each is at measure 250+
The problem is that "freeze" starts at measure 0, regardless of where the song start marker is placed. True, it stops where the "song end" marker is, but the freeze files are huge in comparison to the original file.
Any way to get freeze to start at the song start marker on the .lso's, instead of at measure 0?

R7 250 2GD3 problem

Similar Messages

Maybe you are looking for