R7 260x 2GB OC artifacts

Hi, some times i have artifacts and i don't know how to fix it. Here is a picture
This happens some days only.
912-V293-039
MSI r7 260x 2GD5 OC
S/N: 602-V293-190B1410018761
BIOS TV293MH.3A0
AMD Driver 14.9, and OMEGA 14.12 same problem.
i5 3470
ASUS P8Z77-M
CM GX 650w
Edit: Windows 8.1 PRO x64
I'm using DVI to VGA adapter (Included with the video card).

Quote from: Svet on 13-March-15, 21:59:51
can you test the card in another PC to see if the same will happens there too?
Maybe a friend PC, but to test it, i would need several days because it does not always happen.

Similar Messages

R7 260x 2GB DDR5 wrong version?

hi, i purchased 260x 2gb oc edition from newegg.
however, according to gpu-z and ccc, the spec is lower than what it is supposed to be.
htt://www.imagebam.com/image/009335412118281
did newegg ship me a wrong card? the spec is same as MSI R7 260X OCV3
htt://www.techpowerup.com/gpudb/b3096/msi-r7-260x-ocv3.html
the following is the info from the box label
912-V293-048
R7 260X 2GD5 OC
602-V293-310B1502002605
please help.
thanks

yes, that is the version i ordered and the following is the one i received (going by the spce). From outside, they all look same.
http://www.techpowerup.com/gpudb/b3096/msi-r7-260x-ocv3.html
i just had to make sure that they sent me the wrong card twice, before contacting them to get the right version.
thank you

Will a Gigabyte Radeon R7 260x 2gb work with a m3970am-hp motherboard?

Hello, what I need to know is if this graphics card will work with the m3970am-hp motherboard. I also have already upgraded my PSU so no worries there. Thanks.
Here is the link for the graphics card: http://www.newegg.com/Product/Product.aspx?Item=N82E16814125486

JBreese99, welcome to the forum.
The make / model of the computer would be helpful. The OS running can make a difference.
Also, the length of the card is important. You should get the measurements of the card and make a cardboard template. I don't see any additional power connectors. However, if there happened to be one, you should add at least an inch for the connector. Use this template to see if the card fits with room for good airflow.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Request UEFI GOP VBIOS For MSI R7 260x 2gb OC

hey, here is my S/N : 602-V293--08SB1311035691
the bios : htt p://www.megafileupload.com/en/file/517689/Bonaire-rom.html

Use the attached.
Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
Then unpack the provided archive (300.rar) and put the included file (TV293MH.300) on that stick.
Rename TV293MH.300 to 300.rom. Put the atiflash.exe also included in the archive on the USB stick too. Now boot from the stick.
Type atiflash -p -f -noaper 0 300.rom [ENTER] and let it flash the vbios.

Radeon 0000:01:00.0: Invalid ROM contents

Hi, i change my old Integrated ATI Radeon HD 3300 graphics card by r7 260X 2GB GDDR5 PCIE graphics card .
[hector@archkde ~]$ inxi -Gx
Graphics: Card: Advanced Micro Devices [AMD/ATI] Bonaire XTX [Radeon R7 260X] bus-ID: 01:00.0
Display Server: X.Org 1.16.0 drivers: ati,radeon Resolution: [email protected]
GLX Renderer: Gallium 0.4 on AMD BONAIRE
GLX Version: 3.0 Mesa 10.2.8 Direct Rendering: Yes
When I boot the system says something like:
"kernel: radeon 0000:01:00.0: Invalid ROM contents"
Extract information from teh command jornalctl -b 0
sep 22 17:43:07 archkde kernel: [drm] radeon kernel modesetting enabled.
sep 22 17:43:07 archkde kernel: [drm] initializing kernel modesetting (BONAIRE 0x1002:0x6658 0x1462:0x2935).
sep 22 17:43:07 archkde kernel: [drm] register mmio base: 0xFBD80000
sep 22 17:43:07 archkde kernel: [drm] register mmio size: 262144
sep 22 17:43:07 archkde kernel: [drm] doorbell mmio base: 0xCF800000
sep 22 17:43:07 archkde kernel: [drm] doorbell mmio size: 8388608
sep 22 17:43:07 archkde kernel: radeon 0000:01:00.0: Invalid ROM contents
sep 22 17:43:07 archkde kernel: ATOM BIOS: 113
sep 22 17:43:07 archkde kernel: radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
sep 22 17:43:07 archkde kernel: radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
sep 22 17:43:07 archkde kernel: [drm] Detected VRAM RAM=2048M, BAR=256M
sep 22 17:43:07 archkde kernel: [drm] RAM width 128bits DDR
sep 22 17:43:07 archkde kernel: [TTM] Zone kernel: Available graphics memory: 4089928 kiB
sep 22 17:43:07 archkde kernel: [TTM] Zone dma32: Available graphics memory: 2097152 kiB
sep 22 17:43:07 archkde kernel: [TTM] Initializing pool allocator
sep 22 17:43:07 archkde kernel: [TTM] Initializing DMA pool allocator
sep 22 17:43:07 archkde kernel: [drm] radeon: 2048M of VRAM memory ready
sep 22 17:43:07 archkde kernel: [drm] radeon: 1024M of GTT memory ready.
sep 22 17:43:07 archkde kernel: [drm] Loading BONAIRE Microcode
sep 22 17:43:07 archkde kernel: microcode: CPU0: patch_level=0x010000c6
sep 22 17:43:07 archkde kernel: microcode: CPU0: new patch_level=0x010000db
sep 22 17:43:07 archkde kernel: microcode: CPU1: patch_level=0x010000c6
sep 22 17:43:07 archkde kernel: microcode: CPU1: new patch_level=0x010000db
sep 22 17:43:07 archkde kernel: microcode: CPU2: patch_level=0x010000c6
sep 22 17:43:07 archkde kernel: microcode: CPU2: new patch_level=0x010000db
sep 22 17:43:07 archkde kernel: microcode: CPU3: patch_level=0x010000c6
sep 22 17:43:07 archkde kernel: microcode: CPU3: new patch_level=0x010000db
sep 22 17:43:07 archkde kernel: microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
sep 22 17:43:07 archkde kernel: [drm] radeon/BONAIRE_mc2.bin: 31792 bytes
sep 22 17:43:07 archkde kernel: kvm: Nested Virtualization enabled
sep 22 17:43:07 archkde kernel: kvm: Nested Paging enabled
sep 22 17:43:07 archkde kernel: [drm] Internal thermal controller with fan control
sep 22 17:43:07 archkde kernel: [drm] probing gen 2 caps for device 1022:9603 = 300d02/0
sep 22 17:43:07 archkde kernel: [drm] radeon: dpm initialized
sep 22 17:43:07 archkde kernel: input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
sep 22 17:43:07 archkde kernel: input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
sep 22 17:43:07 archkde kernel: input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
sep 22 17:43:07 archkde kernel: input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
sep 22 17:43:07 archkde kernel: input: HD-Audio Generic HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
sep 22 17:43:07 archkde kernel: input: HD-Audio Generic HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
sep 22 17:43:07 archkde kernel: sound hdaudioC0D0: autoconfig: line_outs=4 (0x1c/0x19/0x22/0x23/0x0) type:line
sep 22 17:43:07 archkde kernel: sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sep 22 17:43:07 archkde kernel: sound hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
sep 22 17:43:07 archkde kernel: sound hdaudioC0D0: mono: mono_out=0x0
sep 22 17:43:07 archkde kernel: sound hdaudioC0D0: dig-out=0x20/0x21
sep 22 17:43:07 archkde kernel: sound hdaudioC0D0: inputs:
sep 22 17:43:07 archkde kernel: sound hdaudioC0D0: Rear Mic=0x1a
sep 22 17:43:07 archkde kernel: sound hdaudioC0D0: Front Mic=0x1e
sep 22 17:43:07 archkde kernel: sound hdaudioC0D0: Line=0x1b
sep 22 17:43:07 archkde kernel: sound hdaudioC0D0: CD=0x1f
sep 22 17:43:07 archkde kernel: input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
sep 22 17:43:07 archkde kernel: input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
sep 22 17:43:07 archkde kernel: input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input18
sep 22 17:43:07 archkde kernel: input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input19
sep 22 17:43:07 archkde kernel: input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input20
sep 22 17:43:07 archkde kernel: input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input21
sep 22 17:43:07 archkde kernel: input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input22
sep 22 17:43:07 archkde kernel: input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input23
sep 22 17:43:07 archkde kernel: [drm] Found VCE firmware/feedback version 40.2.2 / 15!
sep 22 17:43:07 archkde kernel: [drm] GART: num cpu pages 262144, num gpu pages 262144
sep 22 17:43:07 archkde kernel: [drm] probing gen 2 caps for device 1022:9603 = 300d02/0
sep 22 17:43:07 archkde kernel: [drm] PCIE gen 2 link speeds already enabled
sep 22 17:43:07 archkde kernel: [drm] PCIE GART of 1024M enabled (table at 0x000000000078B000).
sep 22 17:43:07 archkde kernel: radeon 0000:01:00.0: WB enabled
sep 22 17:43:07 archkde kernel: radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff8800c59c9c00
sep 22 17:43:07 archkde kernel: radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff8800c59c9c04
sep 22 17:43:07 archkde kernel: radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff8800c59c9c08
sep 22 17:43:07 archkde kernel: radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff8800c59c9c0c
sep 22 17:43:07 archkde kernel: radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff8800c59c9c10
sep 22 17:43:07 archkde kernel: radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc900138b6c98
sep 22 17:43:07 archkde kernel: radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000080000c18 and cpu addr 0xffff8800c59c9c18
sep 22 17:43:07 archkde kernel: radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000080000c1c and cpu addr 0xffff8800c59c9c1c
sep 22 17:43:07 archkde kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
sep 22 17:43:07 archkde kernel: [drm] Driver supports precise vblank timestamp query.
sep 22 17:43:07 archkde kernel: radeon 0000:01:00.0: irq 45 for MSI/MSI-X
sep 22 17:43:07 archkde kernel: radeon 0000:01:00.0: radeon: using MSI.
sep 22 17:43:07 archkde kernel: [drm] radeon: irq initialized.
sep 22 17:43:07 archkde kernel: [drm] ring test on 0 succeeded in 3 usecs
sep 22 17:43:07 archkde kernel: [drm] ring test on 1 succeeded in 3 usecs
sep 22 17:43:07 archkde kernel: [drm] ring test on 2 succeeded in 3 usecs
sep 22 17:43:07 archkde kernel: [drm] ring test on 3 succeeded in 2 usecs
sep 22 17:43:07 archkde kernel: [drm] ring test on 4 succeeded in 2 usecs
sep 22 17:43:07 archkde systemd-udevd[193]: renamed network interface eth0 to enp2s0
sep 22 17:43:07 archkde kernel: [drm] ring test on 5 succeeded in 2 usecs
sep 22 17:43:07 archkde kernel: [drm] UVD initialized successfully.
sep 22 17:43:07 archkde kernel: [drm] ring test on 6 succeeded in 18 usecs
sep 22 17:43:07 archkde kernel: [drm] ring test on 7 succeeded in 4 usecs
sep 22 17:43:07 archkde kernel: [drm] VCE initialized successfully.
sep 22 17:43:07 archkde kernel: [drm] ib test on ring 0 succeeded in 0 usecs
sep 22 17:43:07 archkde kernel: [drm] ib test on ring 1 succeeded in 0 usecs
sep 22 17:43:07 archkde kernel: [drm] ib test on ring 2 succeeded in 0 usecs
sep 22 17:43:07 archkde kernel: [drm] ib test on ring 3 succeeded in 0 usecs
sep 22 17:43:07 archkde kernel: [drm] ib test on ring 4 succeeded in 0 usecs
sep 22 17:43:07 archkde kernel: [drm] ib test on ring 5 succeeded
sep 22 17:43:07 archkde kernel: [drm] ib test on ring 6 succeeded
sep 22 17:43:07 archkde kernel: [drm] ib test on ring 7 succeeded
sep 22 17:43:07 archkde kernel: [drm] Radeon Display Connectors
sep 22 17:43:07 archkde kernel: [drm] Connector 0:
sep 22 17:43:07 archkde kernel: [drm] DP-1
sep 22 17:43:07 archkde kernel: [drm] HPD2
sep 22 17:43:07 archkde kernel: [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
sep 22 17:43:07 archkde kernel: [drm] Encoders:
sep 22 17:43:07 archkde kernel: [drm] DFP1: INTERNAL_UNIPHY2
sep 22 17:43:07 archkde kernel: [drm] Connector 1:
sep 22 17:43:07 archkde kernel: [drm] HDMI-A-1
sep 22 17:43:07 archkde kernel: [drm] HPD3
sep 22 17:43:07 archkde kernel: [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
sep 22 17:43:07 archkde kernel: [drm] Encoders:
sep 22 17:43:07 archkde kernel: [drm] DFP2: INTERNAL_UNIPHY2
sep 22 17:43:07 archkde kernel: [drm] Connector 2:
sep 22 17:43:07 archkde kernel: [drm] DVI-D-1
sep 22 17:43:07 archkde kernel: [drm] HPD1
sep 22 17:43:07 archkde kernel: [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
sep 22 17:43:07 archkde kernel: [drm] Encoders:
sep 22 17:43:07 archkde kernel: [drm] DFP3: INTERNAL_UNIPHY1
sep 22 17:43:07 archkde kernel: [drm] Connector 3:
sep 22 17:43:07 archkde kernel: [drm] DVI-I-1
sep 22 17:43:07 archkde kernel: [drm] HPD6
sep 22 17:43:07 archkde kernel: [drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
sep 22 17:43:07 archkde kernel: [drm] Encoders:
sep 22 17:43:07 archkde kernel: [drm] DFP4: INTERNAL_UNIPHY
sep 22 17:43:07 archkde kernel: [drm] CRT1: INTERNAL_KLDSCP_DAC1
sep 22 17:43:07 archkde kernel: [drm] fb mappable at 0xD098E000
sep 22 17:43:07 archkde kernel: [drm] vram apper at 0xD0000000
sep 22 17:43:07 archkde kernel: [drm] size 8294400
sep 22 17:43:07 archkde kernel: [drm] fb depth is 24
sep 22 17:43:07 archkde kernel: [drm] pitch is 7680
sep 22 17:43:07 archkde kernel: fbcon: radeondrmfb (fb0) is primary device
sep 22 17:43:07 archkde kernel: Console: switching to colour frame buffer device 240x67
sep 22 17:43:07 archkde kernel: radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
sep 22 17:43:07 archkde kernel: radeon 0000:01:00.0: registered panic notifier
sep 22 17:43:07 archkde kernel: [drm] Initialized radeon 2.39.0 20080528 for 0000:01:00.0 on minor 0
sep 22 17:43:08 archkde kernel: sdb: sdb1
Extract information from the command dmesg
[b][ 6.802759] radeon 0000:01:00.0: Invalid ROM contents[/b]
[ 6.803341] ATOM BIOS: 113
[ 6.803407] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[ 6.803409] radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
[ 6.803411] [drm] Detected VRAM RAM=2048M, BAR=256M
[ 6.803412] [drm] RAM width 128bits DDR
[ 6.803494] [TTM] Zone kernel: Available graphics memory: 4089928 kiB
[ 6.803498] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 6.803499] [TTM] Initializing pool allocator
[ 6.803504] [TTM] Initializing DMA pool allocator
[ 6.803523] [drm] radeon: 2048M of VRAM memory ready
[ 6.803524] [drm] radeon: 1024M of GTT memory ready.
[ 6.803535] [drm] Loading BONAIRE Microcode
[ 6.823421] microcode: CPU0: patch_level=0x010000c6
[ 6.883846] microcode: CPU0: new patch_level=0x010000db
[ 6.883865] microcode: CPU1: patch_level=0x010000c6
[ 6.883873] microcode: CPU1: new patch_level=0x010000db
[ 6.883887] microcode: CPU2: patch_level=0x010000c6
[ 6.883896] microcode: CPU2: new patch_level=0x010000db
[ 6.883903] microcode: CPU3: patch_level=0x010000c6
[ 6.883909] microcode: CPU3: new patch_level=0x010000db
[ 6.883961] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 6.935379] [drm] radeon/BONAIRE_mc2.bin: 31792 bytes
[ 6.938250] kvm: Nested Virtualization enabled
[ 6.938254] kvm: Nested Paging enabled
[ 6.946146] [drm] Internal thermal controller with fan control
[ 6.946190] [drm] probing gen 2 caps for device 1022:9603 = 300d02/0
[ 6.952742] [drm] radeon: dpm initialized
[ 7.074837] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
[ 7.074874] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
[ 7.074905] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
[ 7.074936] input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
[ 7.074968] input: HD-Audio Generic HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
[ 7.075000] input: HD-Audio Generic HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
[ 7.123312] sound hdaudioC0D0: autoconfig: line_outs=4 (0x1c/0x19/0x22/0x23/0x0) type:line
[ 7.123317] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.123319] sound hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[ 7.123321] sound hdaudioC0D0: mono: mono_out=0x0
[ 7.123322] sound hdaudioC0D0: dig-out=0x20/0x21
[ 7.123324] sound hdaudioC0D0: inputs:
[ 7.123326] sound hdaudioC0D0: Rear Mic=0x1a
[ 7.123328] sound hdaudioC0D0: Front Mic=0x1e
[ 7.123329] sound hdaudioC0D0: Line=0x1b
[ 7.123331] sound hdaudioC0D0: CD=0x1f
[ 7.135500] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
[ 7.135537] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
[ 7.135572] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input18
[ 7.135610] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input19
[ 7.135643] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input20
[ 7.135675] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input21
[ 7.135711] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input22
[ 7.135741] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input23
[ 7.216535] [drm] Found VCE firmware/feedback version 40.2.2 / 15!
[ 7.216549] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 7.218025] [drm] probing gen 2 caps for device 1022:9603 = 300d02/0
[ 7.218030] [drm] PCIE gen 2 link speeds already enabled
[ 7.231806] [drm] PCIE GART of 1024M enabled (table at 0x000000000078B000).
[ 7.231927] radeon 0000:01:00.0: WB enabled
[ 7.231937] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff8800c59c9c00
[ 7.231939] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff8800c59c9c04
[ 7.231941] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff8800c59c9c08
[ 7.231943] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff8800c59c9c0c
[ 7.231945] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff8800c59c9c10
[ 7.232338] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc900138b6c98
[ 7.232385] radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000080000c18 and cpu addr 0xffff8800c59c9c18
[ 7.232387] radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000080000c1c and cpu addr 0xffff8800c59c9c1c
[ 7.232390] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 7.232391] [drm] Driver supports precise vblank timestamp query.
[ 7.232409] radeon 0000:01:00.0: irq 45 for MSI/MSI-X
[ 7.232420] radeon 0000:01:00.0: radeon: using MSI.
[ 7.232446] [drm] radeon: irq initialized.
[ 7.234443] [drm] ring test on 0 succeeded in 3 usecs
[ 7.234514] [drm] ring test on 1 succeeded in 3 usecs
[ 7.234529] [drm] ring test on 2 succeeded in 3 usecs
[ 7.234673] [drm] ring test on 3 succeeded in 2 usecs
[ 7.234682] [drm] ring test on 4 succeeded in 2 usecs
[ 7.265736] systemd-udevd[193]: renamed network interface eth0 to enp2s0
[ 7.290672] [drm] ring test on 5 succeeded in 2 usecs
[ 7.310663] [drm] UVD initialized successfully.
[ 7.420593] [drm] ring test on 6 succeeded in 18 usecs
[ 7.420606] [drm] ring test on 7 succeeded in 4 usecs
[ 7.420607] [drm] VCE initialized successfully.
[ 7.420845] [drm] ib test on ring 0 succeeded in 0 usecs
[ 7.421000] [drm] ib test on ring 1 succeeded in 0 usecs
[ 7.421153] [drm] ib test on ring 2 succeeded in 0 usecs
[ 7.421312] [drm] ib test on ring 3 succeeded in 0 usecs
[ 7.421470] [drm] ib test on ring 4 succeeded in 0 usecs
[ 7.442273] [drm] ib test on ring 5 succeeded
[ 7.463141] [drm] ib test on ring 6 succeeded
[ 7.463881] [drm] ib test on ring 7 succeeded
[ 7.464397] [drm] Radeon Display Connectors
[ 7.464399] [drm] Connector 0:
[ 7.464400] [drm] DP-1
[ 7.464401] [drm] HPD2
[ 7.464403] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 7.464404] [drm] Encoders:
[ 7.464405] [drm] DFP1: INTERNAL_UNIPHY2
[ 7.464406] [drm] Connector 1:
[ 7.464407] [drm] HDMI-A-1
[ 7.464408] [drm] HPD3
[ 7.464409] [drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[ 7.464410] [drm] Encoders:
[ 7.464411] [drm] DFP2: INTERNAL_UNIPHY2
[ 7.464411] [drm] Connector 2:
[ 7.464412] [drm] DVI-D-1
[ 7.464413] [drm] HPD1
[ 7.464414] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[ 7.464415] [drm] Encoders:
[ 7.464416] [drm] DFP3: INTERNAL_UNIPHY1
[ 7.464416] [drm] Connector 3:
[ 7.464417] [drm] DVI-I-1
[ 7.464418] [drm] HPD6
[ 7.464419] [drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
[ 7.464420] [drm] Encoders:
[ 7.464421] [drm] DFP4: INTERNAL_UNIPHY
[ 7.464422] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 7.522317] [drm] fb mappable at 0xD098E000
[ 7.522319] [drm] vram apper at 0xD0000000
[ 7.522320] [drm] size 8294400
[ 7.522321] [drm] fb depth is 24
[ 7.522322] [drm] pitch is 7680
[ 7.522393] fbcon: radeondrmfb (fb0) is primary device
[ 7.548240] Console: switching to colour frame buffer device 240x67
[ 7.554350] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 7.554352] radeon 0000:01:00.0: registered panic notifier
[ 7.577645] [drm] Initialized radeon 2.39.0 20080528 for 0000:01:00.0 on minor 0
[ 7.917370] sdb: sdb1
[ 7.920476] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 8.216032] Adding 2000892k swap on /dev/sda5. Priority:-1 extents:1 across:2000892k FS
[ 8.426163] mousedev: PS/2 mouse device common for all mice
[ 8.668832] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: data=ordered
[ 8.782334] systemd-journald[150]: Received request to flush runtime journal from PID 1
[ 12.047252] cfg80211: Calling CRDA to update world regulatory domain
[ 18.978595] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 18.978652] ATL1E 0000:02:00.0 enp2s0: NIC Link is Up <100 Mbps Full Duplex>
[ 18.978665] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 43.980440] fuse init (API version 7.23)
I notice that when I move the windows on the desktop a kind of tearing occurs in the edge of the windows.
My O.S is KDE ( Kdebase-workspace 4.11 and aplications 4.14.x ) and the kernel is 3.16.3-1-ARCH.
Thanks.

https://wiki.archlinux.org/index.php/AT … nce_tuning
EXAVSync
Do you also get artifacts like messed up fonts?

After Effects CS6 - RENDER FAIL.

Right so basically I'm trying to render a simple video including the following effects: Twixtor, RSMB & Magic Bullet Looks. When I try to render the video using the H264 option in 30 frames per second, in 1280 x 720, I receive the following errors and I'm really clueless on how to solve this. I'd really appreciate it if someone could help me out, also My computer specifications are:
4 GB Ram
R7 260X 2GB GPU
AMD FX 6300
Windows 8.1 Pro
500GB Hardrive

Oh alright, erm the composition settings are: 1280 x 720, 30 FPS, Lock Aspect ratio to 16:9 (1.78), Pixel Aspect Ratio: Squares Pixels, Frame rate is 60, Resolution is Full 3.5MB per 8BPC frame.
The output is: Quality is Best, Resolution is Full, size is 1280 x 720, frame rate is 30 FPS, and format in the output module is H.264 with a bitrate of 6.00 mbps.
Also I've just tried removing my adjustment layer which consists of the reelsmart motion blur and magic bullet it looks, it seems to be rendering just fine. So could it possibly be one of those effect? I'm really not sure because I always use those and it always has rendered just fine! Thanks so much for replying though man. I hope you can find a fix.

POWER SUPPLY info needed for GRAPHICS CARD UPGRADE!!!

I have a HP PAVILION p6631p and ide like to add a graphics card, but I was told I had to upgrade my power supply.
The card I purchased is the SAPPHIRE RADEON R7 260X 2GB and I was told I need a 500watt or higher power supply.
I was looking at the CORSAIR BRAND power supplies and tried emailing them to help me find the right power supply, but they said they needed to know what type of power supplies HP use in this model PC.
I didnt know what to do so im hoping someone can help me out with this information CORSAIR is asking for so they can help select me the right power supply for my PC.
I been searching for answers for weeks. Hopefully someone can help. Thanks.
This question was solved.
View Solution.

KJonline, welcome to the forum.
You were told correctly. You will have to upgrade the power supply unit (PSU) for the video card to work properly.
The PSU in the computer is a standard ATX. I suggest measuring the existing PSU and comparing the measurements to the one you choose.
I normally suggest at least 500W, but 600W is better for future upgrades. Here is a PSU that should work for you. It is 650W and is an Enthusiast series. This means that it has all of the power that you will need. It is 5.9" (W) x 3.4" (H) x 6.3" (L).
Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Msi 970-g46

ive recently swopped my gfx from a very old nvidea to a asus r7 260x 2gb oc card since doing so and installing all necessary software im finding that every so often sometimes when under load and sometimes when not my pc randomly freezes all my temps are down and all drivers are up to date so is my bios recently updated from your website.
ive looked online and people are saying its probably my vrms playing up as this board doesn't take too well to overclocking is there any way I can check this out? as I purchased the board just under a year ago but have only had the fault since fitting a new gfx. ive tested the card in a friends pc so I know the error isn't coming from a faulty card.

>>Posting Guide<<

MSI A88X-G45 GAMING code 11

I got my new setup back in May of this year. Haven't had any issues except just today. While browsing the internet and playing Runescape getting ready to play some Dota2. When my screen kind of went all pixel'ated like all different colors then shut down.
It won't even start now. I can't even force it to post by unplugging everything except cpu/fan and one stick of ram. It won't even post and it displays 11 on the digit display on the board. After looking in the manual that came with it. It says it is a Early CPU initialization. I have no idea what that means.
I had my friend who knows more about hardware come over and look at it. And he said it is most likely a motherboard issue.
So what do you guys think? If it is a motherboard issue how do i send the board back.
Motherboard: MSI A88X-G45 GAMING
Processor: AMD A10-6800K Richland 4.1GHz (4.4GHz Turbo)

Quote
I got my new setup back in May of this year. Haven't had any issues except just today. While browsing the internet and playing Runescape getting ready to play some Dota2. When my screen kind of went all pixel'ated like all different colors then shut down.
It won't even start now. I can't even force it to post by unplugging everything except cpu/fan and one stick of ram. It won't even post and it displays 11 on the digit display on the board.
with this description & history:
try with different video card i suspect that your "VGA: XFX Double Dissipation R7-260X-CDF4 Radeon R7 260X 2GB"
got some failure

Artifacting with R7 260x 2GD5 OCV1

Hello Forum members, you guys are probably gonna have fun with this one
I recently installed a new R7 260x in my system and have been having problems with it that are driving me crazy (and trust me its a pretty long drive). After the install, I have been having artifacts (dancing red pixels) show up in the darker areas of my screen, and I have traced the issue back to the card under the fact of it does it with every display. Also, in some games, skyrim especially, I have been having distortion of the objects on the loading screens. Other than that the card runs just fine, but I am unsure of what the issue is here. I filed a support ticket and heard back from a tech with troubleshooting tips that worked to no avail. I am also sure that the PCI-E slot is working because my old gpu worked just fine in it also. I checked for a mainboard bios update with Live Update 5 and it said my BIOS was up to date. If it helps, my system specs are below
CPU: AMD FX-6120 (scrapped from an old Hp tower that my family was going to sell since we bought a computer to replace it)
RAM: 8gb Kingston (Don't have the model number since it is from that old Hp tower also)
Mobo: Msi 970a-g43 (chose it since this was a bit of a budget build)
GPU Msi R7 260x 2GD5 OCV1
Old GPU: Hp Radeon HD 7450
PSU: Rosewill Hive 750 watt
Windwos 8.1 64 bit

Hey, I haven't checked this forum in a while but nice to see it is still active. Got news to report on this. I sent the card back to newegg and received the replacement yesterday. This is a good one. After installing it yesterday, it ran perfectly fine. I booted up this morning and the artifacts returned much worse and blue this time. Plus windows I minimized were leaving outlines of were they were sitting and a bit of ghosting, along with the image distortion. So, to try something, I rebooted my system and after the reboot it worked just fine. I'm at school right now so I can't test it to see if it happens again but when I get a chance I will let you guys know.

[Request]BIOS new version for R7 260X OC 2GB DDR5

SN: 602-V293-30SB1402036230
TUT how to flash for graphic card.
CPU: AMD FX 6300 (non-overclocked)
COLLER: SAMURAI ZZ ver.A
MOBO: MSI 970A-G43
GPU: MSI R7 260X OC 2 GB
RAM: 4 GB RAM 1600 Kingston Blu
SSD: SSD 64 GB Verbatim
SSD: SSD 120GB GoodRAM C50
HDD: HDD 250 GB Seagate
PSU: Thermaltake Smart Se 630W 80+ Bronze
SYSTEM: Windows 8.1 Pro x64

Quote from: flobelix on 30-May-14, 23:35:22
A screenshot doesn't help. Save the current vbios to file, upload it to some file hoster and add link here.
http://www34.zippyshare.com/v/85763337/file.html

Artifacts in games MSI R9 270x 2Gb

Hi.
Few days ago I bought new PC.
PC spec: MSI 970 Gaming AM3+ (MS-7963), GPU MSI R9 270x, AMD FX 8320, PSU Be-Quiet 600W. OS Win.8.1, 8Gb Ram HyperX Blue
In every game I play I got artifacts, is unplayable. I test with MSI drivers, also with new AMD drivers 14.12
Also I flash GPU with new BiOS, problem still exist. So I want ask you guys, should I RMA this GPU or there is fix for it ?
BIOs --------> https://www.dropbox.com/s/35cyztj6oup2fgu/Pitcairn.rom?dl=0
GPU S/N 602-V303-13SB1312019935
Screen with old BIOS
New BIOS

GPU temp in heavy stress (furmark 1080p AA x8) is max 78 but mostly in games is around 65-70.
I can't tell if problem occurs with other GPU cos I don't have one.
Also today this happend when I turn on my PC.
This should be MSI splash screen.

How do you re-encode h.264 video without artifacts?

Hi
I have a video that was exported out of Premiere using h.264 at max 20mbps. All is good. Since the export takes 10+ hours I now want to create a version for Vimeo and Youtube. Becuase of the file size I don't want to upload the entire 2GB file to these services (I have a 5GB week limit upload at Vimeo) so I'll simply bring the file back into Premiere and export it using the Vimeo or Youtube setting with the max mbps around 5mbps or so. When I do this the resulting output file is unplayable, lots of artifacts and stutters. Some blacks are white even. I'm guessing Premiere is having an issue becuase it's re-encoding an already coded h.264 file, or something like that. Any ideas why this would happen and any solution to producing a good output?
Cheers.

As Dave stated, re-compressing already lossy-compressed video directly into another lossy compressed format is never a good idea: In this instance, image quality will degrade severely from that of the original AVCHD video. And all of the suggested intermediate files for Windows habe their disadvantages: DNxHD (and possibly UT) invoke the Apple QuirckTime API that induces a severe gamma shift in the encoded video (in the worst cases, whites come out medium-gray and middle tones come out pitch black) and is very slow to process due to it being restricted to 32-bit operations. Lagarith requires a massively powerful CPU - far more powerful than even a heavily overclocked i7-3960X - just to even play back well (this is based on my experience with Lagarith and my heavily overclocked i7-2600K, which dropped frames massively on playback of Lagarith-encoded material).

Screen Artifacts on High Res Powerbook 15 inch

Just received the PB 15 high res Friday, so far can't see horizontal lines. I for one am concerned with the artifacts showing up while viewing DVDs and in Safari. Apple CR was kind enough to send a replacement for my previous gen 1.67 15 due to MLB/mem slot/DVDR failures, only one month old. This new screen shows vertical artifacts, a vertical row of color pixels in certain Safari pages, regardless of background color, white and colored pixels flickering on left side of display while viewing DVDs at any scan rate or resolution. The display calibration doesn't correct all the magenta/blue cast either, and must resort to EyeOne to calibrate this new display.
Leaning toward a refund after going through two defective generations of PB G4s. I'm beginning to feel sort of foolish at this point. I couldn't get the system to recognize the expensive Micron/Crucial Memory just purchased either, Tech Support told me to buy Apple brand, but added that they don't support 2GB configurations in this PB???
What is everybody doing about this? I'm unable to feel comfortable with this unit by design at this point. I have alot of money invested in Apple products for my photography business and would find it hard to switch over at this point. I'm especially unimpressed with Apple Tech Supports deflection of all this junk. I think iPods will be what's left of this product if Apple doesn't start paying attention to their product instead of image and stock margins.

I have the same problam. i can see the flickering occasionally in almost any applications, very rapidly and fast that's sometimes hard to notice like a blink of an eye. I have no idea whether it's a graphic card issue or not.
I have purchased the unit in Apple SF and left the country, I have no idea how to get support after all I know even Apple have worldwide warranty. You can't get it fixed or replace without sending back to US.
I'm loading software update right now hoping it will cure the problem with my fingers crossed.

Motion Artifacts or 3D like Problem in CS4!

Hello!
I have just noticed this strange footage in my timeline as the camera pans or the object in focus moves. The footage have got some edges or kind of shadows which follows behind like 3D footage without glasses or ghosting when the camera pans. This is not good for the eye when you watch it, and it just doesn't look right. Overall there is no smooth fluid motion in this footage where there is movement in the scene.
Original footage was recorded with a Canon XH A1 HDV 50i as I am in PAL region. I captured this footage using the camera's downconvert feature to SD. After capturing I purchased a Matrox RT X2 which I then used for multicam multiple monitors display. When I edited this footage with my client I didn't see this at all, and since it was a multicam project we had to cut between the cameras first then a second pass for refining and adding titles and transitions. All the editing was done as Matrox SD sequence. However when I played back the DVD thats when I noticed this strange motion artifacts in the footage. This is earlier in the year before the release of CS5.
I revisited the project because the client now wants more copies of the DVD. Although they didn't complain with this DVD I just thought I should correct the problem. The DVD is just 1hr 30 mins, so its not DVD compression here. This happens in the first half an hour of the DVD and then after that everything else plays smoothly and fluidly.Now the problem is that the footage in the Matrox sequence plays with the motion artifacts and it has a red line bar without any single effects. The othe footage does not have a red bar. But if I play it in the source monitor there is no such problem. This is happening on 3 out of the 8 tapes recorded on that event, and the tapes were recorded by one camera.
I have tried creating an Adobe PAL project but I cannot actually see as I haven't connected my preview monitor from my PC GPU! Still this SD footage have got a red line bar when in Adobe sequence. This includes even the footage that plays well.
Is this the matrox sequence causing this and if so how can I get rid of this problem without having to start editing from scratch!
SYSTEM
HP XW6600 Vista Biz 64
Xeon Quad 2.83Ghz
22GB RAM
GTX285 GPU (2GB)
PP CS4
RAID 0 for Source Files
Matrox RT X2
LG 22" monitor
Samsung 24" monitor

I wonder if this is a Field Reversal issue, as Matrox flips things around from regular DVD. That would be the first place that I would check.
Does this footage work in a non-Matrox Project?
Good luck,
Hunt

R7 260x 2GB OC artifacts

Similar Messages

Maybe you are looking for