R7 M260 will not activate (AMD 6410 APU)
Hi, I have a HP Laptop with an R7 M260 and despite trying 2 AMD CCC Drivers, and using a couple of HP's drivers, and I always set my games to 'High performance' in catalyst control centre- and no matter what, they always seem to run on the integrated APU (A8-6410) Graphics so I get insanely low FPS.
After reading the thread on HP Laptops, I determined that I needed to force Battlefield 3 to use DirectX 11 - which I did, and even then the FPS remained the same.
Is there anyway to make sure they are running on the GPU not APU?
I tried AMD System monitor but the dedciated GPU (r7 M260) is always at 0% and 0Mhz even when I run Battlefield 3 or SKILL Special Force 2 on "high performance" mode.
Ive spent ages looking for a answer but havent reached a conclusion. What am I doing wrong here?
How can I fix this? Thanks
, Hello and thanks for posting on the HP support forums. Did your system come with Windows 10? If so try running the Windows Upgrade Troubleshooter. If that fails you will have to roll back to the previous operating system if it did not come with windows 10. Thanks again for posting and have a great day.
Similar Messages
-
After updatung my phone now it will not activate. please help
Take it to the nearest Apple Store or Reserve an appointment to a Apple Specialist!
-
The photo option in ICloud on my computer will not activate (it is grayed out) after I load the Icloud download. My Ipad and iphone are sharing my photo stream photos but cannot get to my computer. I read all the instructions and reloaded Cloud 2 x but again will not activate the photo sharing piece.
I don't have a Recently Added playlist. However, I discovered that the file I had named Eating Healthy was given the name You Can Enjoy Eating Healthy when it copied to iTunes. I'm guessing iTunes pulled the full name of the piece from the internet. Upshot--the mp3 did transfer to iTunes on all 3 tries, but I was looking in my alphabetized list under E, not Y, so I didn't see it there. Thanks for your help.
-
My old computer had itunes and downloaded songs that I put on my ipod. Well, my old computer got replaced years ago without saving hard drive info or passwords and my iPod burnt out years ago and will not activate. I now have a new computer and iPod and I have an iTunes account on my iPhone5. How can I get access to my old songs on new computer? Are they lost for good? I have no info about my old computer and old account.
Downloading past purchases from the App Store ... - Support - Apple
-
I heard about all the problems with the new iOs 7 update but also heard Apple would force me to do it. I tried to update but didn't have enough space. Had to delete ALOT of my apps and still not enough space. Phone was working perfectly fine and message pops up that "I will not have any service until I restore to iTunes. I plug into laptop to restore and it forces me to update to iOs7. Takes 3 hours. It updates but phone doesn't restore. Have tried all the troubleshooting tips:reset to factory settings, recover etc. Got a new SIM card because it said I don't have one but I do. Apple support wouldn't help me because I was out of warranty, and said I would have to pay. Went to the Apple store and they couldn't fix it and said "it's a hardware issue" that will cost me $170.00+. I FIRMLY BELIEVE THAT THE NEW iO7 FRIED MY PHONE'S HARDWARE. The phone is on the HELLO stage and keeps searching but will not activate to server- it's temporarily unavailable. Have tried multiple times.I have a 3 year contract with Rogers and the phone is less than 2 years old. Apple needs to take responsibility for crashing my phone. I NEED A FREE NEW PHONE!!!
Restore it to factory settings, then set it up from your back up. Did this last year when I got my new iPod, and it worked. I have no idea why syncing OTA can sometimes glitch, but hopefully this will help.
-
Windows 8 will not activate with new SSD (second) hard drive
I added a new SSD drive in the second hard drive bay. I used the HP restoration media to install Windows 8 on the new SSD drive. Windows 8 will not activate. After spending 90 minutes on the phone with HP support (and paying $150), they told me to contact Microsoft. After spending some time with Microsoft, they told me that the Windows product key is being locked by HP, and there is nothing they can do.
Hi badgerbuzz,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publically post ( serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Regards,
George
I work for HP -
Windows 8.1 will not activate on HP19-2113w after system refresh.
Everything was working fine on my PC. Then the other day it crashed and said there was a disk error and that it had to scan the whole drive to find the error. It finished scanning, but windows 8.1 would not load sucessfully. Therefore I did a system refresh thru HP recovery. After doing that windows would start up normally, but I lost my activation. When I tried to activate the response was "Key doesn't work try again later" or something like that. Kept trying, no luck. I thought it may have been an error with the system refresh, so I did the total system reset (after saving personal data). Now I am having the same problem with activation, and If I try to navigate the normal way to the activation screen, the screen disapears. I can get to activation using command prompt. but key still does not work. The key I am using I retrived from my BIOS data. Also, I ran the refresh and reset from the origional hard drive partition. I hope someone has a solution to this. Thanks is advance Bill
Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your desktop computer will not activate after performing a system refresh, and I would be happy to assist you in this matter! In order to correct this issue, I suggest following the steps in this resource on Windows 8 product activation, which should help to activate Windows 8.1 on your system. Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards -
My version of Acrobat XI Pro will not activate when trying to convert to an Acrobat form from an existing Word document. Acrobat not responding.
Please advise
John BHi johnb69345359,
I am sorry for the inconvenience caused. Lets try to resolve this issue.
I would require few details in order to diagnose the issue correctly :-
1) Are you able to launch Acrobat XI pro ?
If yes, please try Help -> Repair option to repair Acrobat XI pro. Then try to perform the covert operation.
2) Let me know the Operating system installed on your computer.
3) Is there any error code or error message?
Regards,
Aadesh -
hi, i just updated my iphone 3gs to iso5 now it will not activate ive pressed ''try again'' alot but not getting anywere please help! i need my phone for work not had it too long and really annoyed lol thanks,
Sorry, but Apple does not provide a downgrade path for iOS.
Because downgrading is unsupported by Apple we cannot discuss it on these forums, but you can use Google to find information on how to install an older version of iOS on any device.
Note that you will void the warranty and loose official support by Apple.
Feel free to let Apple know at http://www.apple.com/feedback
Anyway, give a try resetting all your settings:
Settings > General > Reset > Reset All Settings -
I downloaded the iOS 7 but it would not install so i tethered it to my computer the connect to iTunes screen came on the iPhone. But after a few minutes, it crashed and iTunes told me it was in recovery mode and that it will be restored to factory setting. After that process, it is stuck on the activation part and will not activate. Please advise!
All of Apple's servers...including the activation servers are pretty much flooded with users like you doing the same thing. Be patient and keep at it...or wait till the traffic to them has decreased and then try again. Coming back to it tomorrow (if that's a viable option for you) will likely increase your chances of not having issues.
-
Received an authorized unlock code from apple/AT&T for my off-contract 3GS (8GB). Per the “Completing Authorized iPhone Unlock” instructions, I connected to iTunes to back up and restore so my iPhone can be unlocked! But after the restore my iPhone is stuck at the activation screen, it will not activate saying “Your iPhone cannot be activated because the activation server is temporarily unavailable”. I tried this again and again for countless times, no way! I have my old AT&T simcard and other carrier’s simcard. Both will not help. Please help me to activate and start using my phone.
Hello,
I got like the same problem, last days I get message to restore my iPhone, so I did it yesterday and it work very well. In the afternoon I saw that at top in the left corner show invaild sim card or so (only knew the german version). so I restore it again but now it won`t activate after I enter SIM-PIN and it accept it, it shows "No Service".
Anybody can help? My Carrier is o2 Germany.
Thanks! -
I have a MacBook Pro 15" 2.53GHz Mid2009.. updated to Lion which is now 10.7.3 build 11D50b... when I close lid and connect to Cinema Display, display will not activate when keyboard/mouse used... disconnect display, open lid and laptop display will not activate... only way out is hold power button. Worked fine before Lion update. Any Advice?
Thanks very much Coander15... I've printed the doc you pointed me towards and I'll run through it.. hoping it helps!
Before I installed Lion I simply hit any key on the keyboard or clicked the mouse...
The keyboard is USB (usually connected to monitor which is connected to laptop... have tried direct connect to laptop as well with no luck) and mouse is USB wireless to one of those tiny plug in's... have tried direct connect USb mouse as well with no luck.
I could plug the closed/sleeping laptop into the monitor and unplug from the monitor without incident all day/night... always worked fine.
Had heard something about this happening w/ Lion but went ahead anyway.
Oh well...
Hoping your pointer helps... will let you know how it turns out. Thanks very much for responding!!! -
I have just restored my iphone 3gs and now it will not activate on itunes
I updated my phone to latest 6.1.3 and it would not start up so i restored back to previous version and now it will not activate in i tunes
what do i do now i've tried with / without sim
really not happydon't know if cydia on as cannot see any apps without it being activated can i ?
getting a 02 sim tomorrow as i only have a micro sim from them at moment in my iphone 4
i know it worked on orange as well so not sure if it was unlocked or jail broken
if i put a o2 sim in do you think it will work? -
HT4623 my iphone 3gs will not activate says the server is down and stuck on that screen
my iphone 3gs will not activate says server is down and it is now stuck on that screen
You look somewhere else for an answer or you buy a new phone.
Hacked / jailbroken phones can not be discussed here per the TOS. -
HT5137 my iMessage will not activate
my imessage will not activate, can someone please help me with this?
http://support.apple.com/kb/TS4268
or
http://discussions.apple.com/message/20985218?ac_cid=tw123456#20985218
Maybe you are looking for
-
Can someone please help me with this. Loading problems and error codes.
I have several problems with itunes on my PC. I use 2 PC's and Iphone for work and I have an IPod nano. For about a week I have been having several problems with Itunes. The first problem is I cannot access the store, I get the loading screen and tha
-
How to get a sub tag in xml file
As the xml file is the below thing ------ <?xml version="1.0" encoding="UTF-8"?> <addRequest xmlns:spml="urn:oasis:names:tc:SPML:2:0"> <data> <attributes> <attr name="Objectclass"> <value>SafePolicy</value
-
How do I transfer contacts from Treo 755p to Treo Pro?
Hello Everyone, I am the new owner of a Treo Pro! So far, so good except for the fact that I cannot figure out how to transfer my contacts from my old Treo 755p to the Pro. Can anyone help? Post relates to: Treo Pro T850 (Sprint) This question was
-
Importing Security Through shared services caused admin user password chang
Hi, I exported shared services from shared services url from one environment and imported into another environment. This changed the admin user password where I imported. Details:- I went to shared services of one environment say dev and to -> Applic
-
Make a document workflow in portal
Hello, We have a requirement which we need to have a documents workflow such contains steps, 1. document author submit the documnet 2. each next step can edit/add content to the document and continue to next step. 3. after last step the ducument is r