R7850 Twin Frozr 2GD5 Issues

Hello,
I've done a bit of searching and haven't been able to find a solution to this issue.
I installed my R7850 Twin Frozr 2GD5/OC yesterday and upgraded my PSU at the same time and have been having several issues since the install.
First Issue: If I connect more than one monitor to the card, both screens go black and the only way to fix the issue is to unplug one monitor and hard reset the computer. When in safe mode or while booting, I do not have this issue.
Second Issue: If only 1 monitor is connected either through DVI, HDMI or Mini Display, the screen works for about 10 minutes before the display goes completely white or grey and the only solution is to hard reboot the computer.
Are these known issues? Do I have a flawed card? Should I get Svet's update that I have seen links to?
I have my computer info is:
S/N: 602-V273-050C1309022273
Board: HP AAHD2-HY Rev. 1.03
Bios: Version 7.06
VGA: MSI R7850 Twin Frozr 2GD5/OC
PSU: EVGA 600B
CPU: AMD A6-3620 2.20GHz
MEM: hynix 8GB DDR3 - 1333 MHz
HDD: Seagate 7200.12 1TB
OS: Windows 7 64bit Professional
Thank you for your help,
Darksyre

here i attached latest vbios for the card
for flashing: http://www.techpowerup.com/downloads/2311/ati-winflash-2-6-7/
also you can try different VGA drivers,
the latest one from msi web for your card
or the latest one from AMD/ATI web
Before install/reinstall VGA drivers,
use DDU to remove current one: http://www.wagnardmobile.com/DDU/

Similar Messages

  • UEFI BIOS Request R7850 Twin Frozr 2GD5/OC

    I would like to get an UEFI/GOP BIOS for my R7850 Twin Frozr 2GD5/OC.
    rom:
    https: //www.dropbox.com/s/zrf64lt8o8gmpco/Pitcairn.rom
    s/n (without last 3 digit):
    602-V273-01SB1205001

    Latest GOP:  TV273MH.111
    Attached

  • Request:UEFI / GOP Vbios-MSI R7850 twin Frozr-2GD5/OC Radeon HD 7850

    I would like to request a UEFI / GOP Vbios for MSI R7850 Twin Frozr-2GD5/OC Radeon HD 7850 if one is available, my current vbios does not support UEFI / GOP. Thanks.
    serial number:602-v273-050B1303096145
    Gpu-z:  h**p://gpuz.techpowerup.com/13/10/29/9wg.png
    Would I just use the installer that is on this site to flash the bios, any help appreciated.
    Thanks

    Thankyou very much Svet,
    The card and operating system(8.1) works perfect now.
    What I did was, extract the files you gave me, and downloaded the ATIWinflash program,
     then I put the .150 file in the same folder, then renamed the .150 file to a .rom file,
    and used ATIWinflash to flash vbios(too lazy to go to the store), only took about 10 secs, then rebooted, and no more watermark :-),
    Thanks again for your help.
    I am glad I found this site or I would probably be just living with the watermark( Then again I don't think so, it was driving me crazy)

  • R7850 Twin Frozr 2GD5/OC - Flickering problem

    Hi all!
    I have a problem that many seems to have with the 7850 card (Same for different brands) -
    When I surf on the net, I get a lot of flickering when scrolling a page. This is the same with all browsers - Firefox, Chrome, IE.
    Turning off hardware acceleration in Firefox lessens the problem, but it's still there.
    I read on an external page (Not allowed to link) that this is due to low 2D clock speeds.
    One user also reported that Gigabyte fixed this with a BIOS update, so I wonder if MSI also have released such a thing?
    Btw, tried the workaround with editing the profiles.xml and manually set the clocks higher, which fixed the problem, but this isn't optimal as the clock then works on high load when not needed.
    Thanks in advance!
    /Rigr

    Sorry, maybe a little too fast there
    My specs:
    OS: Windows 7 Professional (x64) Build 7601, Service Pack 1
    Motherboard: Asus P8Z77-V Pro Intel Z7 (BIOS version 0906)
    RAM: Corsair Vengeance Low Profile DDR3 PC12800/1600MHz CL9 2x4GB (Profile set to: XMP 800.0 MHz)
    CPU: Intel Core i5-3570K, 3400 MHz (Using "Standard" mode)
    PSU: Corsair Power Supply 750W HX ATX
    GPU:MSI Radeon R7850 Twin Frozr 2GD5/OC 2GB
    HDD #1: WDC WD2500KS-00MJB0 250 GB (OS is installed here)
    HDD #2: WDC WD5000AAKS-75TMA0 500 GB
    DVD-ROM: ATAPI DVD D DH16D2S
    To clarify the error report:
    Everything works perfect except for web surfing where I get strange millisecond long flickers/flashes, when scrolling a page.
    If I check the AMD OverDrive, then I can see that the core speed is 150MHz, and the RAM speed is 300MHz as minimum and then goes higher when I scroll a page. And as I wrote, if i manually change those values in "C:\Users\<username>\AppData\Local\ATI\ACE\profiles .xml" to work for example in 700Mhz as minimum, then the problem is gone, but with the cost that the clocks works on too high values for what's actually needed when the system is idle.

  • Requesting UEFI/GOP BIOS for R7850 Twin Frozr 2GD5/OC

    I'd like to request UEFI/GOP BIOS for my  R7850 Twin Frozr 2GD5/OC
    S/N: 602-V273-01SB1203131181
    BIOS Version:  015.017.000.000.000861 (113-C4030400-100)

    Use the attached.
    Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
    Then unpack the provided archive (111.rar) and put the included file (TV273MH.111) on that stick.
    Rename TV273MH.111 to 111.rom. Put the atiflash.exe also included in the archive on the USB stick too. Now boot from the stick.
    Type atiflash -p -f -noaper 0 111.rom [ENTER] and let it flash the vbios.

  • GOP/UEFI Vbios R7850 Twin Frozr 2GD5/OC request

    Hi, i need an UEFI Bios for my card
    R7850 Twin Frozr 2GD5/OC
    S/N: 602-V273-010B1206126731
    BIOS Dump - **http://db.tt/eSNEPPKU**
    Thank you very much in advance

    thanks, everything works well 

  • R7850 Twin Frozr 2GD5/OC

    Hi guys
    i'm looking for latest bios version for my card
    s/n:602-v273-010b1207041314
    bios VER015.017.000.000.000861 (113-c4030400100)
    bios               dropbox.com/s/t52b5ogciyxzfoz/Pitcairn.rom

    Quote from: Ernest on 27-April-13, 22:39:35
    ok i did it i hope
    old bios ver bios VER015.017.000.000.000861 (113-c4030400100)
    new bios ver bios VER015.024.000.001.000861 (113-c4030400x00)
    so is it corect ?
    yes it is
    Quote from: bigfrank on 27-April-13, 23:56:18
    Hello,
    Just wanted to confirm this is the same for my card:
    R7850 Twin Frozr 2GD5/OC
    SN: 602-V273-010B1210250527
    GPU-Z Bios: 015.017.000.000.000861 (113-C4030400-100)
    Thank you.
    yes its for the same card

  • Msi R7850 Twin Frozr 2GD5/OC

    Hello, I want to flash my R7850 Twin Frozr 2GD5/OC with the lattest bios and I want uefi vbios support..
    sn: 602- v273-01sb1203081967
    bios: not original, changed by previous owner
    Thanks!

    here it is attached below
    For flashing:
    Quote from: Flob
    Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
    Then unpack the previously provided archive (111.rar) and put the included file (TV273MH.111) on that stick.
    Rename TV273MH.111 to 111.rom. Put the atiflash.exe also included in the archive on the USB stick too. Now boot from the stick.
    Type atiflash -p -f -noaper 0 111.rom [ENTER] and let it flash the vbios.
    flash tool: http://www.techpowerup.com/downloads/2306/atiflash-4-17/

  • Request: GOP Vbios for MSI R7850 twin Frozr-2GD5/OC

    Quote from: Svet on 01-November-13, 23:19:40
    np
    Hi!
    i have msi r7850 twin frozer III 2gb
    Serial number is: 602-V273-01SB1204055350
    bios:015.017.000.000.000861 (113-c4030400-100
    am i use this TV273MH.150 gop vbios in my card ? many thanks...
    gpuz.techpowerup.com/13/12/25/dfm.png

    Don't hijack other topics please. For your own issue open an own topic: >>Please read and comply with the Forum Rules.<<
    This time I did it for you by splitting your post off.
    Quote
    am i use this TV273MH.150 gop vbios in my card ?
    If you want to ask if you can use TV273MH.150 then no you need TV273MH.111. Neither the gpu-z readout nor screenshot would be helpful without the S/N by the way as those do NOT readout the actual bios version.
    Now use attached TV273MH.111.

  • Idle temps for MSI R7850 Twin Frozr 2GD5/OC?

    Hello everyone,
    I'm concerned about my idle temperatures for this card. I just received it and based on reviews, most people are idling around 30C. However, my card is idling above 55C (without OC). I have adequate cooling in my case, and I've even tested it without the side of the case attached. What could cause my idle temperature to be so high?
    Thanks!

    Quote from: flobelix on 01-August-12, 04:00:22
    Keep in mind you are using dual monitor. Even in idle the card will therefor consum far more power than a vga with just one display connected. Consuming more power means more heat so questionable if the idle temps of "most people" you refered to were also using dual monitor. What are your load temps?
    The voltage difference between 2 monitors and 1 is 0.9V vs 0.825V. HOWEVER, I did notice that with a single monitor the GPU Memory clock drops (to 150MHz) during idle, but with dual monitor it stays at full speed when idle (Driver issue? I'm running 12.7 beta). A single monitor drops my idle temps down to around 44/46C. IF I force the GPU memory clock to be at the same idle speed when using a single monitor, the temperature for Dual Monitor during idle drops to 44/46C, the SAME as single monitor. That is at 1.075V. That is still a good 15C above what others are reporting. In this case, I'm not seeing a difference in temp between dual a single monitors when I force the GPU Mem Clock to the idle speed.
    With load I get between 70C and 80C running Furmark.
    One of the reasons I bought this card was because of its ability to overclock. If I'm already that far above in temp, then I feel like I'm going to hit a wall much sooner than I should. I feel like something weird is going on with my card.

  • Problem with hd R7850 twin frozr 2gd5

    when gaming sometimes my pc locks up with a black screen and sound stuck in a very small loop and cant do anything apart from manually resetting my pc or killing the power. It was happening occasionally with sleeping dogs (although after lowering the quality settings well below the recommended its fine now) and has also happened on a couple of rare occasions with Black ops 2. I recently installed Far Cry 3 and literally every time i play it after around 5 min i get this issue. I have the latest beta drivers from ati installed and the game is fully updated. I tried lowering the resolution and quality settings but after aroun 20 mins of play it happend again i only purchased the card in sept and am very disgruntled to say the least. What would be the best method to identify the cause of the problem and more importantly fix it or avoid it happening to me again?

    >>Posting Guide<<

  • Request for R7850 Twin Frozr 2GD5/OC UEFI/GOP vbios

    Just upgraded to windows 8 and would like to use UEFI with my graphics card.
    Serial No 602-v273 - 010b1206063772
    Link to my dropbox GPUz screenshot is :-   htt*s://www.dropbox.com/s/ld73z2i2bxt73y0/MSI%20R7850.gif
    Thanks in advance

    Many thanks for your swift reply.
    Now have windows 8.1 fully functioning and booting on UEFI.
    Thanks again
    Reg

  • [Request] UEFI/GOP Bios for R7850 Twin Frozr 2GD5/OC

    hi , i need this card's bios file ,
    SN: 602-V273-01SB1204029746
    thank you very much

    you can use this one https://forum-en.msi.com/index.php?topic=250935.msg1442485#msg1442485

  • Request for R7850 Twin Frozr 2GD5/OC GOP/UEFI BIOS

    Hi. I need a bios. But I don't know how to setup bios. Please explain how do it? (I'm sorry for my bad English)
    My bios version 015.017.000.000.000861(113-C4030400-100)
    Bios Dump htt p://www.megafileupload.com/en/file/431776/Pitcairn-rom.html
    Thank you.

    Quote from: Svet on 03-July-13, 20:23:16
    tell S/N of the card
    Thanks for quick answer. My S/N 602-V273-01SB1205062300

  • Requesting UEFI GOP firmware for R7850 Twin Frozr 2GD5/OC

    Hi!
    My S/n is :602-V273-05SC1207012579, which UEFI GOP firmware can I use? Thanks in advance.

    Quote from: Svet on 29-April-13, 02:38:10
    attached below
    Thanks for your attachment. I've tried it. But if I set mainboard's bios supportion to "Compitable EFI", then my computer can't start at all, screen staying black, even without post.  if bios supportion set to "Legency bios", then everything will be OK. I wonder why the firmware isn't supported for ASUS mainboard's "Compitable EFI" selection.
    And gpu-z 6.7 shows clock frequence lowers from previous 980 to 850. 
    I lost my orignal vbios version, can i get it back?
    Please forgive me for my poor English.
    Thank you

Maybe you are looking for

  • Development and Deployment of BPEL processes in ALBPM 6.0

    All, I tried to develop a simple BPEL 2.0 process in ALBPM 6.0 and noticed that the tool does not generate an endpoint automatically to expose the BPEL as a web service. I had to create my own bidning and the service interface to get rid of a bunch o

  • I keep getting "The document could not be saved. A file I/O error has occurred."

    Everytime I try to save a PDF file in Reader X... "save as...PDF" I get the "The document could not be saved. A file I/O error has occurred." When I save it "save as...Text" is saves.

  • Windows Media file write failure

    Help, I'm using a Gateway computer with Windows XP Professional OS, version 2002 and Service Pack3. It has Intel Core CPU, 6600 @ 2.40GHz, 2.41 GHz, 2.00 GB of RAM. I have both Premiere Pro CS3 and CS4 installed. There's 54.1 GB of free space on my H

  • How can I restrict the number of emails in iOS 7?

    In the previous versions of iOS you could indicate how much emails you wanted to store on your iPhone. Now in iOS 7 that option is gone. I don't want to clogg my iPhone whit all my emails. What can I do to restrict the number of emails?

  • Read(Load)/Write(Save) Problem

    I have a form that is filled out by people and I want to save the information in a text file. I have done that well at least I think with the Save code. My problem is when I go to load the text file (.CMM file for my program), nothing happens but it