R7970 GPU Usage Spiking Issue

I'm having an issue with my 7970 and the GPU usage spiking while im at my desktop. I just rebooted and I know I have nothing running and yet I have this usage spike to about 57% and then it seems to mess up my mouse whenever it happens.
If I'm dragging my lmb and then a spike happens my mouse stops the drag and then starts a new one after the spike. It's a pretty consistant event and I'm not sure why it's happening and I can't find any processes that would cause usage like this.
Any suggestions?
edit; running latest beta catalyst drivers and this was occuring before I updated to the beta drivers. Windows 7 x64 pro

board; msi z77 mpower
vga; msi r7970 2pmg3gd5
psu; corsair m620w
cpu; intel i7 3770k @ 4.7ghz
mem 8gb ddr3 1866 patriot
hdd; intel 250gb ssd
cooler - cpu; nhd14 noctua
cooler - vga; arctic accelero extreme 7970
os windows 7 pro x64

Similar Messages

  • MSI r7970 lightning low gpu usage.

    Hi guys. I play battlefield 4 and i have low gpu usage, around 60-70%. With low usage i have low fps. I thought it is CPU problem, but i think it shouldn't be, because it is i5 2500k clocked at 4.2Ghz. Can someone help or it is maybe driver/game bug or something.

    I use latest beta. I remembered i didn't Intel inf drivers after reinstalling my windows few days ago , i might try that now.
    Edit: I installed all new drivers and all i could think of, but all the same. Usage too low.

  • Is Mountain Lion 10.8.1 Causing GPU Usage to be 100% (iStat Menus)?

    I'm running a Macbook Pro (8,2) with a 2.3GHz Core i7 Processor, 16GB of Ram, 480GB OWC SSD, High-Res Screen (BTO).  I just upgraded to Mountain Lion from Lion, and now notice that iStat Menus is reporting 100% GPU usage.  Is anyone else seeing this?  It never decreases; always stays at 100%.  There seems to be quite a bit of chatter about this over at MacRumors forums and MacUpdate.  Based on their Twitter feed, Bjango seems to believe that this is a Mountain Lion issue/bug. 
    Anyone else seeing this?

    It is an issue of iStat. On my iMac with the same GPU it show also 100%. But Open GL Driver Monitor show about 13%.

  • Cellular data usage spiking while using WIFI

    Over the last couple of months, we have noticed a HUGE spike in our Cellular Data usage.  We have had an iPhone 5 for a little over a year and have always been under our 2GB limit.  However, during October our "usage" spiked to almost 4GB resulting in additional charges.  In November, we saw our "usage" spike to almost 5GB.  We do not stream music nor videos and have gone as far as to turn off data for apps and images on emails.  Additionally, we use WIFI at home with multiple access points to ensure complete coverage.  This is maddening and extremely frustrating knowing we have not drastically changed our usage and have most likely decreased our usage based on our awareness of the issue.  Verizon's solutions are to increase our plan, turn off cellular data while on WIFI, and wipe the phone.  All of which are not acceptable.  The suggestion that 4G results in higher data usage than 3G is just ridiculous.  I will be watching our usage this month very closely and refuse to pay any overages.  If it continues to climb, I will make my voice heard the only other way I know how by walking to another carrier.  I have been a Verizon supporter and customer for almost 10 years however, this is unacceptable.

    My findings on the matter are summarized here...
    http://www.youtube.com/watch?v=47CM06N5gIo

  • 6950 Twin Frozr III/PE, Low FPS, Low GPU usage

    I could use some help, I've tried everything I can think of and no luck so far so maybe someone here can help. I spent all weekend trying to fix it with no luck.
    I am having issues with my MSI 6950 Twin Frozr III/Power Edition cards. When playing a games my GPU usage never seems to get above 50%. I've tried each card individually and in crossfire but it never seems to make a difference. My frame rates fluctuate between 70 and 20 FPS while the GPU load fluctuates between 30-50%. Crossfire or not the frame rates and GPU usage stays about the same, never using more than 60% of the GPU. I only recently began seeing issues but I don't remember exactly when it started.
    Hardware tried:
    MSI 6950 Twin Frozr III/Power Edition (not flashed to 6970)
    AMD Phenom II x6 1090T @4.0GHz
    MSI 890FXA-GD70
    16GB Mushkin DDR3 1600
    Mushkin SATA III SSD
    NZXT HALE90 850W PSU
    14x FN 120RB 120mm fans
    Aquacomputer Airplex Radiator with built in D5 Pump
    i7-2600K @4.6GHz
    ASUS P8P67 Pro
    16GB Corsair DDR3 1600
    OCZ Vertex 3 SSD
    SeaSonic X750 Gold 750W
    Corsair H60
    Things I've tried (tried with both cards individually and in crossfire with no change, and in both systems, and various combinations)
    -Current Drivers 12.10
    -Rolling drivers back to 11.11
    -Beta 12.11 Drivers
    -Set constant voltage in Afterburner (heard that was causing conflict problems between Afterburner and CCC)
    -Tried switching the cards between my 1090T @4.0GHz and my i7-2600K @4.6GHz and no change (both CPUs stay at around 60-70% so I dont think thats the bottleneck)
    -Set power tune to +20%
    -Tried clean install of windows 7 and no change
    -Checked both PSUs with tester and both check out fine (not sure if the load is too much for them though)
    Games that I've tried (with issues):
    -Borderlands 2
    -Hawken
    -Dishonord
    -Skyrim
    -Dirt 3
    -Saints Row 3
    -Need for Speed: Most Wanted (always been bad but doesn't seem to be made any worse like the others)
    I'm getting very discouraged and really hoping my graphics cards aren't going bad (they are only a year old). Any help is greatly appreciated.

    can you test either of the card in another PC?
    have you tried to turn off the vsync?

  • New MSI 670 PE GTX low GPU usage

    Just got my MSI 670 PE from newegg yesterday.  Doing some tests on 3dmark vantage in performance preset ( default that every bench uses) and my GPU usage drops to 40%, quite often, especially during intense graphic areas.  It also does this in other games as well -- Crysis 2, Bf3. 
    I watched some youtube videos of others with this card and they did not have these issues.
    Using MSI afterburner for OSD.  310.90 Drivers (tried 310.70 as well).
    Could i have received a faulty card?  Might I be having a CPU bottleneck?  My CPU is a Athlon 2 x4 640 @ 3ghz. MSI 870-g45 motherboard, 4gb 1600 ram.
    Thanks.

    http://www.3dmark.com/3dmv/4522414?loginkey=u9Kmo3yZ4th3up_jo-TwyA
    This is my 3dmark vantage score with my current system.  See any issues?

  • Low GPU Usage with 780 Ti (Adaptive to whats being rendered)

    Received this card 2 days ago, and have been trying to fix this issue since I got it. In games, the GPU usage is never consistent, and will stay the same if I'm not moving or looking around. Turning around by say 45 degrees will cause the GPU usage to change to something different. My friend also purchased a 780 Ti a few days ago, but from Gigabyte. His GPU usage during games is always around 100%. His performance is amazing because of it, while mine can be pretty bad at times.
    I've already tried a lot of different things to try and fix it, but nothing has worked so far. Here's a list of some of the things I've already tried.
    1 Updated BIOS, and disabled any power saving settings.
    2 Used K-Boost, and then disabled it.
    3 Set NCP 3d settings to prefer maximum performance.
    4 Used Nvidia's Inspector tool to manually change those options again.
    5 Tried giving it a higher power percentage.
    6 Switched the power cables for different ones.
    7 Switched it to a different PCI slot.
    8 Disabled all software for startup.
    9 Gone through and made sure AMD files were completely gone.
    10 Forced constant voltage using MSI Afterburner.
    11 Disconnected my second monitor.
    Basic Specs
    i7 4770k
    MSI 780 Ti Twin Frozr
    Rosewill 1300 Watt PSU 80+ Gold
    16GB DDR3 (8x2)
    Asus Z87 Sabertooth (Latest BIOS of course)
    Windows 7 (With all of the updates)
    Speccy snapshot speccy.piriform.com/results/b0TPCnyCvUgRnbZBwwJMc3d
    GPU usage from flying around in Battlefield 4. i.imgur.com/qWRzWvi.jpg
    Can't seem to actually link those, so copy and paste them.

    Okay. so I toke the benchmark with the following results:
    I noticed (as you can see) my fps dropped sometimes when it changed scenes..
    And during the benchmark, the usage was at 99% for the most...
    The game I am currently playing is Arma 3... Which has the low gpu/cpu usage..
    And thanks a lot for your quick answer! 

  • MSI GTX 770 Gaming TF4 low gpu usage problem

    Board: Asus X79 Deluxe
    Bios: Version 0506
    VGA:   MSI 770GTX Gaming 2GB TF4
    PSU:   Seasonic 760w Platinum
    Intel Core I7 4930k 
    MEM: Kingston Predator 16gb (4x4) 1.65v 2400mhz
    HDD: Samsung PRO 256gb SSD
    COOLER: Noctua NHD14
    OC: (Turbo)4.4Ghz 1.28CPUV ram: 2133 Mhz 1.55v
    OS: Windows 7 64bit Ultimate
    I bought MSI 770GTX Gaming 2GB few months ago. Now i`m playing Crysis 3 and occasionally my GPU usage drops to 45%-50%. It happends on same places, like in first scene when climbing up the stairs. I go up, GPU Usage drops to 45% for 1-2 scs and stuff like that. Now I wonder is anyone else experiencing same symptoms,  and what can I do to solve this problem? I`m using latest drivers, 331.82. I registered my card, and updated BIOS from your support site. Temperatures are <70c, nowhere near power limit so that can`t be causing low gpu drops. I did fresh Windows install but it didn`t help. Didn`t try older drivers yet.

    I have the same card and had a lot of similar issues to this especially in crisis 3.
     I seemed to resolve the issues by removing the Nvidia audio drivers and the MSI gaming app, then I  reinstalled the NVidia drivers as a clean install without the audio driver.  I didn't reinstall the gaming app as when I did the issue comes back

  • MSI R9 270X HAWK low GPU usage and screen flickering problem

    I bought an MSI R9 270X HAWK vga and I have this screen flickering issue.
    My S/N: 602-V303-02SB1310009419
    I also had another problem: the GPU usage averages at 50-55% on every game (DX9,10,11 games like TESV Skyrim, League of Legends, Crysis 2-3, Battlefield 2-3, Far Cry 3) and never reaches more than 80%(well, once I made it run at 99%, I used ultra settings on Battlefield 4 with Sync on, Ultra preset settings with 200% res. scale so pretty much the maxed out Settings). I'm using this card with 8GB DDR3 Corsair Vengeance RAM with a stock clocked 1090T and AMD's reply for this problem was, that this problem can be driver problem as well as VBIOS.

    I created a bootable usb, placed the files in it (formated, and only these files were at the usb, dos startup directed to win98boot's folder (C:\win98boot) renamed the tv303ms.134 to tv303ms.rom,l after i placed it on the usb and in the boot menu there are four additional options related to the USB (there's no USB only option): FDD, HDD, CDROM, zip. Selecting the FDD and CDROM starts the windows normally, The HDD option ended on the white-black screen, and there's where I can write:   C:\>
    after this i tried to type in: atiflash.exe TV303MS.rom [enter] nothing happened, then atiflash.exe [enter] and popped up some help instructions for the use of atiflash, I pressed enter over and over and then requested another command, I tiped in the tv303ms.rom [enter] and again nothing happened (invalid command I think). What should I do now ? I did some research but still can't figure out what the problem is. :/ (If I done everything correct, maybe the problem related to my motherboard or USB stick?)

  • Does Keynote support CUDA or GPU usage?

    Thinking about buying a Nvidia K5000 video card.
    Does anybody know if Keynote supports CUDA and GPU usage?

    Keynote uses OpenGL hardware acceleration for animation. So yes, if you have a decent GPU then animation may run smoother. That being said, a K5000 is complete overkill for something like Keynote. Even the Intel HD4000 graphics on my Macbook Air runs Keynote animations very smoothly.

  • MSI 770 TF 2GD5/OC cant display GPU usage

    Hi everyone,
    Programs like Afterburner and GPU-Z dont show the GPU usage from my 770,
    it always stays at 0% wich obviously isnt right when im in-game etc..
    Tried it with NVIDIA driver versions 320.49 and the new 326.19 beta,
    and MSI Gaming App 1.0.0.2 and 1.0.0.3 installed, if that matters..
    Could the card itself be faulty or something ?
    I also have another problem, so i might aswell thow it in here if thats ok !?.. When my frames in BF3 drop just a littlebit fom 121(locked) to for example 108, it lags for a moment.
    Does anybody have an idea what could cause that ? got an i5-3570K @ 4,3GHz

    Aha, ok haven't seen that so far. I'm also hoping for continued Afterburner support as the App is far from being great and can crash the system or the driver when switching between the modes. As Afterbunrner is still quite popular and attracting a lot of people to decide for MSI vgas I also guess the app will just be added. For overclocking boost 2.0 cards it is at least quite useful as it limits the gpu's freedom to jump between boost clockrates a bit. 

  • I have a 2012 Macbook Pro and the GPU is causing issues with Yosemite. How can I resolve this issue?

    I have a 2012 Macbook Pro and the GPU is causing issues with Yosemite. There are a number of issues I have run across:
    If I have four tabs open on Safari then I start to get a flickering on the screen from the GPU refreshing
    When I leave the computer alone for more than 20 mins the screen saver should start -- what happens is that the screen goes to black. When I move the cursor I do not get the login screen. I have to reboot
    FireFox Web browser will not run
    I get issues with the computer running very slowly
    I have already turned off the transparency option in settings. Any ideas??
    Cheers
    Matt
    MacBook Pro, OS X Yosemite (10.10), GPU / Video Card with Yosemite

    Do you have more than one OS on the Mac?
    You may want to look at something like http://bjango.com/mac/istatmenus/. This has a Free Trial window, but it is a commercial application. If there are any heat/sensor issues, this may help.
    A SMC Reset or PRAM/NVRAM reset may also help.
    Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
    Startup key combinations for Intel-based Macs - Apple Support

  • Average GPU usage for MPE?

    Hey fellas - I just wanted to ask an informal survey for those that have CUDA enabled. What's your average GPU usage during rendering?  I just ran the GPU Meter gadget and noticed that the GPU doesn't go high at all (<10%). Is that normal?

    Depends on the footage, the rendering required (effects used) and most importantly on the system confuration.
    If you have the engine of a Lamborghini Aventador (fast CPU/GPU) but coupled with the gearbox of a 30 year old VW Beetle (memory) or a set of wheels from a Fiat 500 (disk) it will not run at full power and speed.

  • MSI GT70 GPU usage drops

    I would help from you guys.I bought new MSI GT70 laptop and i am noticed problems with games.Every game i play i have random 1-2 sec freezes which happening every 10-20min.So i installed afterburner and i saw my gpu usage drops to 0 when i have that freeze.Could somebody gives me information how to fix it?i have drivers updated and i dont know what next.
    I will give you any information you need just help me please.
    sorry for my english.

    Hey i installed 327.xx nvidia driver and i still have gpu usage sometimes 0 but i dont have screen freezes at all so its fine.Thanks for advice with driver.

  • Gpu usage.

    Hello,
    Unsure if i can or not. But i am looking to lower the gpu usage ingame on my 670 PE. As i can't even play WoW (other games too) without the gpu running at 99% usage and sounding like a jet engine. been trying to put up with it but alas. I'm almost at my limit. Only good thing coming out of this is that i never need my heating on when this baby is running at a constant 83c 

    @flobelix: proof?
    I can proove my statement. In many games whenever I turn on V-sync and the game is higher than 60 FPS (for example - World of Tanks, average 75-80 FPS = 80% GPU usage - after turning VsyncOn: 50-60% GPU usage) it works.
    So isn't it actually limiting GPU usage? Or what am I limiting? The readings are wrong? It's obvious that if You get higher FPS and u cap them Your card doesn't have to perform as hard as without the limit - it's a matter of frames it has to render. At least to me it is 
    Offcourse - if Your card can't perform >60FPS it won't work as intended.

Maybe you are looking for

  • I am unable to retain my Settings  Manager changes for Adobe Flash version 9.0.124.0

    Hi there:) Every time I log out from the Adobe online Settings Manager and then check the settings at a later stage the changes that I made earlier have not been retained? Has anyone else experienced a similar problem and if so is there a solution? M

  • Passing parameters in pl/sql concurrent request

    hi.. i want to add parameters in the code of concurrent programe that we are registering from the back end.. IF p_status = 'CL' THEN*/ v_id := FND_REQUEST.SUBMIT_REQUEST('AR'      ,'XRAXINV_SEL'      ,SYSDATE      ,FALSE      ,'TRX_NUMBER','Yes','' ,

  • Vendor Code: 17412 and  17401

    SQL-DEV V1.5.4 Java Platform : 1.6.0_07 Windows : XP V2002 SP3 Oracle Version : 10.2.0.4.0 - 64bit Production MSSQL : 2008 Link: DG4MSQL Steps to reproduce: Using a public database link which is established between MSSQL and Oracle. 1. <select * from

  • Time Management Query

    Hi Guys, What is the real use of Shift Group in time management Hi Guys if i want to connect my sap software with other software to collect data employees Clock in/Clock Out time what will be th e procedure in IMG to connect with subsystem,so that th

  • ORA-00322: log 1 of thread 1 is not current copy

    can you please help me. Im using oracle express edition. Regrds upul Indika. SQL> startup ORACLE instance started. Total System Global Area 146800640 bytes Fixed Size 1286220 bytes Variable Size 83890100 bytes Database Buffers 58720256 bytes Redo Buf