R9 270x flicker. Requesting VBIOS if available

Hello. I have been experiencing this problem since i bought this brand new MSI Radeon R9 270x Gaming 2G BF4 card.
S/N: 602-V303-07SB1312026597
and here is the link to the current vbios
filedropper.com/pitcairn

I did try the card in a completely different PC with better hardware. The problem continues. Everything is fine when im working or watching a movie or just browsing. The moment i start playing a game and the resolution changes or the monitor refreshes the screen these Artifacts show up. If i close the game and restart my pc and launch the game again without starting any other program it runs fine.... until i press alt+tab and return to desktop, screen refreshes and then back in game Artifacts appear. Gets very irritating. If there is a hardware problem i cant do anything to get it changed or repaired. I live in Pakistan!! no Warranty no Repairs, but if it is software or firmware related then i still have a chance to get it working normally

Similar Messages

(Request for reporting available) is not coming in Cube

Hi All,
I have Cube & DSO.
I added fields in DSO & Cube.
Cube1 has Aggregrates built on it.i added 5 infoobjects on it, Now when i load data from DSO to Cube(Request for reporting available) is not coming up. i cant do reporting on it. can anyone help.
thanks in advance,
Kiran.

Hi ....
Have you done the Roll up ?
Since aggregates are there on that cube....until and unless you do the roll up that request will not be available for Reporting...
Regards,
Debjani....

Request for reporting available icon is missing !

Hi,
I have an infocube which has been uploaded by ODS and the data load was successful.
But--
The request for reporting available Icon is missing in the request.
Prior to this dataload, yes there were falided requests which i had deleted before uplaoding it self.
Why i am not seeing the icon?
Raj

Hi Raj,
If you are using BI 7, then in the mange tab of the infocube check in the extream right ....
otherwise it should appear...
if you are talking abt ODS then you might have missed the step to activate data in ods.
hope this helps..
cheer's
HVR.

"Request for Reporting available " is not displayed after loading the data.

Hi
A DSO feeds the data to a cube and DSO. In dso reporting sysmbol is present. However in the cube "Request for Reporting available " is not present in the manage tab of the cube.
Please advise on this.
Regards
loyee

Hi,
What is the status in Monitor. If it is ok, go to manage of the infocube,
in that screen on the menu, Environment --> Automatic Request processing. Then you will get three check boxes.
Click the first check box, (Set Quality status to OK). If you aggregates, choose second box.
Hope this helps.
Regards,
Rama Murthy.

First call attempt fails with 12000; reason="Routes available for this request but no available gateway at this point"

We've installed a new Audiocodes Mediant 1000B gateway for our customer. They only have about 6 users enabled for Enterprise voice and using Lync for all calls. They have an intermittent problem whereby the first call attempt to a number on the
PSTN fails with 12000; reason="Routes available for this request but no available gateway at this point". There is only one PSTN gateway installed. All routes point to this gateway. What I found initially is that the calls
were failing after 10 seconds which is the default "failovertimeout" in the OutboundRouting.exe.config. I found this post http://voipnorm.blogspot.co.uk/2012/06/lync-2010-gateway-timeout-call-failures.html and
changed the value to 20 seconds. Subsequent failures failed after 20 seconds (the new value). The interesting thing is that the second attempt even a couple of seconds later succeeds. My Lync server event log has 46046 "A call to a PSTN
number failed due to non availability of gateways." for the failed call and 46047 "A PBX gateway is now responding to requests after some failures." for the successful call moments later.
My environment is Lync 2010. A single enterprise edition Front End with collocated mediation. The server is virtual and in a different physical location to the gateway. The two sites are connected via a LES1000. The RTT between the
sites is very low so it isn't necessarily networking.
In the Syslog output on the Audiocodes we don't see the call even reach the gateway. It's likely that Lync has simply marked the gateway as down and doesn't route the first call. Then it wakes up and marks it as up and routes the next call.
Update wise I'm on 4.0.7577.183, 199 and 217 for those that are up to date and the only components that are behind say that 223 is available. Those being Core Components, Lync Server, Conferencing Server and Web Components.
As I said, this is intermittent, apparently doesn't happen for every user (which I don't buy), but is easily replicated on request.
I definitely think changing the failovertimeout value has reduced the number of failures. But realistically I don't want users sitting there for 20 seconds before their call fails. Or 19 seconds for the call to route.
I've found a few posts on this and similar issues. I don't get the 25051 or 25052 errors.
Any help gratefully appreciated.
Regards
Randy Chapman
Best Regards Randy Chapman

Try to change the value of Failovertimeout to 1000.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Upgrade requested but not available

I purchased full Acrobat XI Standard, downloaded and installed. Now an upgrade with serial number is requested but not available. How can I resolve?

http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
-has a link about why you are prompted to enter a serial number which may help

I just downloaded Itunes to my new computer, and when I tried to go to the Store, it says the info I requested isn't available in the US. What gives?

I just downloaded Itunes to my new computer, and when I tried to go to the Store, it says the info I requested isn't available in the US. What gives?

Make sure you have the latest version of iTunes, which is available here -> http://www.apple.com/itunes/download/
Then try following the steps in this Apple article to create an account without a credit card -> Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card

Requested resource not available - can not find servlet

I have an application in tomcat that uses jsp and servlets. The JSP works fine, but I keep getting a "requested resource not available" erroe when i try to access a servlet. My jsp is in a directory called ProjectManager, and my servlet classes are in WEB-INF/classes inside ProjectManager and are in a package called pmt.
I can access my jsp using localhost:8080/ProjectManager/index.jsp, but I cannot seem to access the servlets, regardless of the URL I try. I've tried adding a servlet-name and a servlet-mapping in the web.xml file but I'm still stuck.
Does anybody have any ideas?
Thanks in advance.

What jar files should be in the library? I have the following:
commons-lang-2.4(2).jar
mysqlconnector-java-5.1.6.bin.jar
webserviceutils.jar
Here is my web.xml as I too am getting "the request resource....cannot be found:
<?xml version="1.0" encoding="UTF-8"?>
<web-app id="WebApp_ID" version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">
     <display-name>
     classBlog</display-name>
     <servlet>
          <description>
          </description>
          <display-name>
          DriverServlet</display-name>
          <servlet-name>DriverServlet</servlet-name>
          <servlet-class>
          edu.ec.web.classBlog.DriverServlet</servlet-class>
     </servlet>
     <servlet>
          <description>
          </description>
          <display-name>
          AddEntityServlet</display-name>
          <servlet-name>AddEntityServlet</servlet-name>
          <servlet-class>
          com.ec.blog.web.AddEntityServlet</servlet-class>
     </servlet>
     <servlet>
          <description>
          </description>
          <display-name>
          DeleteEntityServlet</display-name>
          <servlet-name>DeleteEntityServlet</servlet-name>
          <servlet-class>
          com.ec.blog.web.DeleteEntityServlet</servlet-class>
     </servlet>
     <servlet>
          <description>
          </description>
          <display-name>
          EditEntityServlet</display-name>
          <servlet-name>EditEntityServlet</servlet-name>
          <servlet-class>
          com.ec.blog.web.EditEntityServlet</servlet-class>
     </servlet>
     <servlet>
          <description>
          </description>
          <display-name>
          ViewBlogServlet</display-name>
          <servlet-name>ViewBlogServlet</servlet-name>
          <servlet-class>
          com.ec.blog.web.ViewBlogServlet</servlet-class>
     </servlet>
     <servlet>
          <description>
          </description>
          <display-name>
          ViewEntityServlet</display-name>
          <servlet-name>ViewEntityServlet</servlet-name>
          <servlet-class>
          com.ec.blog.web.ViewEntityServlet</servlet-class>
     </servlet>
     <servlet>
          <description>
          </description>
          <display-name>
          AddEntryServlet</display-name>
          <servlet-name>AddEntryServlet</servlet-name>
          <servlet-class>
          com.ec.blog.web.AddEntryServlet</servlet-class>
     </servlet>
     <servlet>
          <description>
          </description>
          <display-name>
          DeleteEntryServlet</display-name>
          <servlet-name>DeleteEntryServlet</servlet-name>
          <servlet-class>
          com.ec.blog.web.DeleteEntryServlet</servlet-class>
     </servlet>
     <servlet>
          <description>
          </description>
          <display-name>
          EditEntryServlet</display-name>
          <servlet-name>EditEntryServlet</servlet-name>
          <servlet-class>
          com.ec.blog.web.EditEntryServlet</servlet-class>
     </servlet>
     <servlet>
          <description>
          </description>
          <display-name>
          ViewEntryServlet</display-name>
          <servlet-name>ViewEntryServlet</servlet-name>
          <servlet-class>
          com.ec.blog.web.ViewEntryServlet</servlet-class>
     </servlet>
     <servlet-mapping>
          <servlet-name>DriverServlet</servlet-name>
          <url-pattern>/DriverServlet</url-pattern>
     </servlet-mapping>
     <servlet-mapping>
          <servlet-name>AddEntityServlet</servlet-name>
          <url-pattern>/AddEntityServlet</url-pattern>
     </servlet-mapping>
     <servlet-mapping>
          <servlet-name>DeleteEntityServlet</servlet-name>
          <url-pattern>/DeleteEntityServlet</url-pattern>
     </servlet-mapping>
     <servlet-mapping>
          <servlet-name>EditEntityServlet</servlet-name>
          <url-pattern>/EditEntityServlet</url-pattern>
     </servlet-mapping>
     <servlet-mapping>
          <servlet-name>ViewBlogServlet</servlet-name>
          <url-pattern>/ViewBlogServlet</url-pattern>
     </servlet-mapping>
     <servlet-mapping>
          <servlet-name>ViewEntityServlet</servlet-name>
          <url-pattern>/ViewEntityServlet</url-pattern>
     </servlet-mapping>
     <servlet-mapping>
          <servlet-name>AddEntryServlet</servlet-name>
          <url-pattern>/AddEntryServlet</url-pattern>
     </servlet-mapping>
     <servlet-mapping>
          <servlet-name>DeleteEntryServlet</servlet-name>
          <url-pattern>/DeleteEntryServlet</url-pattern>
     </servlet-mapping>
     <servlet-mapping>
          <servlet-name>EditEntryServlet</servlet-name>
          <url-pattern>/EditEntryServlet</url-pattern>
     </servlet-mapping>
     <servlet-mapping>
          <servlet-name>ViewEntryServlet</servlet-name>
          <url-pattern>/ViewEntryServlet</url-pattern>
     </servlet-mapping>
     <welcome-file-list>
          <welcome-file>index.html</welcome-file>
          <welcome-file>index.htm</welcome-file>
          <welcome-file>index.jsp</welcome-file>
          <welcome-file>default.html</welcome-file>
          <welcome-file>default.htm</welcome-file>
          <welcome-file>default.jsp</welcome-file>
     </welcome-file-list>
</web-app>

Oracle.jbo.RowNotAvailableException: Requested row not available

Hello all,
i'm new to ADF and at work I'm using ADF/JDEV 10.1.2.
I will try to explain the scenario where I'm getting oracle.jbo.RowNotAvailableException: Requested row not available in the iterator:
I have 2 pages:
A)Search Page - SearchUI.xml - uses View1 - uses DC1
B)Create Page - CreateUI.xml - uses same view as above View1 - uses same datacontrol as above DC1
The search page has a link to create page.
When I test the application the search page functions fine. The create page functions fine when I test it separately.
but when i click the link on the search page to go to create page: I get the following error:oracle.jbo.RowNotAvailableException: Requested row not available in the iterator.
I' have tried fiollowing but no luck so far:
1) Turned off Enable Token state validation -basically in each UIModel above it is set to FALSE
2) If i remove the bindings from create page in the CreateUI.xml and just leave the action - it creates the account and- the Search->create page works fine BUT then Search->create->ThirdPage that uses the same view as the first two pages gives the above error
i'm also using struts1.0.
Each page works fine on its own but its when I go from one page to the other that's when i get this error.
Kindly suggest me if you have noticed this behaviour.
Thank you.

Here is the stack trace:
oracle.jbo.RowNotAvailableException: JBO-25046: Requested row not available in row set iterator FrmlProjectView.
     at oracle.jbo.client.remote.RowSetIteratorImpl.getAllRowsInRange(RowSetIteratorImpl.java:2082)
     at oracle.jbo.client.remote.RowSetImpl.getAllRowsInRange(RowSetImpl.java:743)
     at oracle.jbo.client.remote.ViewUsageImpl.getAllRowsInRange(ViewUsageImpl.java:1123)
     at oracle.jbo.common.ws.WSRowSetIteratorBase.getAllRowsInRange(WSRowSetIteratorBase.java:740)
     at oracle.adf.model.binding.DCIteratorBinding.getAllRowsInRange(DCIteratorBinding.java:1717)
     at oracle.adf.model.binding.DCIteratorBinding.refreshControl(DCIteratorBinding.java:682)
     at oracle.adf.model.binding.DCBindingContainer.refreshControl(DCBindingContainer.java:1596)
     at oracle.adf.controller.lifecycle.PageLifecycle.prepareModel(PageLifecycle.java:205)
     at oracle.adf.controller.struts.actions.StrutsPageLifecycle.prepareModel(StrutsPageLifecycle.java:70)
     at oracle.adf.controller.struts.actions.DataAction.prepareModel(DataAction.java:295)
     at oracle.adf.controller.struts.actions.DataAction.prepareModel(DataAction.java:486)
     at oracle.adf.controller.lifecycle.PageLifecycle.handleLifecycle(PageLifecycle.java:105)
     at oracle.adf.controller.struts.actions.DataAction.handleLifecycle(DataAction.java:223)

BEx Transport Requests '' ist not available or not suitable

hi, all,
I want to change a query, that has been transported back from Prod.System into TestSystem. Changes in the query aren't possible - the error message is
" BEx Transport Requests '' ist not available or not suitable ".
Now, there is a Standard BEx Transport Request and, in the RSA1 -> Transport Connection I see the query complete with that Transport Request.
What can the reason be? Any Idea?
Thanks a lot in advance.
neven

Ciao, Paolo,
thank you for the quick responce.
I did exactly as described :
The easiest thing to do is the following:
1) collect your query in transport connection
2) check if it is already assigned to a transport
2a)if assigned to a transport check if this is the standard bex transport. If so go to step 3, If not see if you should just tranport that request (or you can just go to step 3...but i wouldn't advise that)
3) unlock the standard bex request
4) now go back to transport connection and put the collected objects in a new request
5) release and transport your new request
It still doesn't help. I can't change the Query. The error-message is stil the same.
best regards
neven

Opening Query: u0091BEx transport request '' is not available or not suitable"u0092

Hello,
I tried was able to run and modify a query last week. When I try to modify/run it now, it gives the message below and allows me to run it but not modify.
BEx transport request '' is not available or not suitable"
What are the possbile causes and remedies to this problem?
Thanks in advance.

dear Amanda,
here can imply 'copy' since as the result objects(query and elements) in production are exactly same with dev. but the terms 'copy' itself in query normally refer to copy query from one infoprovider to another infoprovider.
(transaction rszc).
i think she mean the query objects included in transport request and will be carried on to qa/production server.
once the new queries 'placed on transport'(in request), we must immediately create a bex request for the same package, otherwise nobody can save their queries (that included in the request).
transport bex
http://help.sap.com/saphelp_nw2004s/helpdata/en/38/5ee7377a98c17fe10000009b38f842/frameset.htm
copy query
http://help.sap.com/saphelp_bw33/helpdata/en/9f/f57539d6d1c93be10000000a114084/frameset.htm
hope this helps.

Bex Transport request is not available

Hi guys
I want to change the Bex query from query designer, when i go for change mode it didnu2019t allow me to change and throws error message "Bex transport request " is not available or not suitable" and in second line it gives "choose an existing request.
Can any one tell me how to change the Bex query with a transport request?
Gaurav

Hi,
You get this message if you have captured the query in a transport request and released or transported the request.
You can somply capture the query in a new request again from transport connection and then you will be able to edit the query.
even after capturing the query in the request is not allowing to edit then you need to try the option as explained by our friend above.
Regds,
Shashank

BEx Transport Request is not available or not sitable

Hi,
When i try to install some queries from Business Content in the BW DEV box, the error was :
<b>BEx Transport Request is not available or not sitable</b>
Please let me know what has to be done in order to get out of this error
Thanks & Regards,
Kishore

Hi Ken,
Thanks for responding to my problem.
You are right. I am installing from business content queries that have never been installed before.
so when i am installing the queries from business content the error was :
BEx transport request is not suitable or not available.
How to proceed now ?
Please give reply ASAP....
Thanks & Regards,
Kishore

Msi 270x gaming flicker issue - vbios request+tutorial

Hello,
I bought a MSI Radeon 270x 2GB Gaming ED and I have downloaded latest driver and i still have a flicker issue in games, in dark spots.
Can you help me with vbios and all steps?
s/n:602-V303-03SB1310011676

>>This<< is the latest so far.
Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
Then unpack the previously provided archive (102.rar) and put the included file (TV303MH.102) on that stick.
Rename TV303MH.102 to 102.rom. Put the atiflash.exe also included in the archive on the USB stick too. Now boot from the stick.
Type atiflash -p -f -noaper 0 102.rom [ENTER] and let it flash the vbios.

R9 270x gaming 2g vbios request - flicker issue

Hi
would love a vbios for my card since as I read here, it can solve the flickering issue Im having
live update says bios is latest tho.
s/n is 602-v303-03sb1311007806
would love a short guide on it if u guys have time,
i made the usb boot stick already
thanks in advance

Use >>this<<
Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
Then unpack the previously provided archive (102.rar) and put the included file (TV303MH.102) on that stick.
Rename TV303MH.102 to 102.rom. Put the atiflash.exe also included in the archive on the USB stick too. Now boot from the stick.
Type atiflash -p -f -noaper 0 102.rom [ENTER] and let it flash the vbios.

R9 270x flicker. Requesting VBIOS if available

Similar Messages

Maybe you are looking for