R9 280x have shake screen problem
i have problemwith screen shake and it happen random, make me very upset,
what can i solve this, need to claim rma or software fix,
pls help, thanks
sn: 602V27738SB1401107978
Quote
bios: 015042000000003435
We need an actual copy of your vbios. Save it to file, upload it to some file hoster and add link here.
Similar Messages
-
My iPad Air have a screen problem so I sent it to iService (I'm Thai)
but they told me that they don't know how long that I have to wait until I will get a new one?
Because they said there's no stock in Singapore
Can anyone help me?
Just bought on 15/11/2013You can call iService and ask to speak with a manager.
-
HT5957 iso 7.0.2 continue have lock screen problem in my iphone 4s.
continue have lock screen problem in my iphone 4s.
I have got same problem.7.0.2 lock screen bug,i can access my photos from lock screen
-
I have Possible screen problem with iPhone 5 - Is this normal?
I have an iPhone 5 purchased about 4 months ago and I'm not sure if this is a defect or not but when I boot up the iPhone and the Apple logo appears all around the logo is totally black except for the upper left corner. That corner has a yellowish/whitish tint when I assume like the rest of screen around the logo it should be totally black. There is no other issue or complaint about it I just I'm just wondering if this is common or can lead to future screen problems.
Thanks for all your input!This is not normal. Bring your phone to Apple for evaluation
-
HT1338 I have a screen problem from my Imac 27
I bought the used Imac 27 (2011 version) from Amazon.com
rightnow I got a screen problem. It is a grey side on my screen. In the beginning is perfect .
After few months , my screen have a lot of dirts , and I can see the dark inside.Resetting PRAM and NVRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
I have a screen problem on start up
can any body tell me what this is
If you have a monitor, connect it to the MBP. If the monitor shows an image, then the display or the display connection is faulty. If the monitor is the same as the MBP, then the GPu is the prime suspect.
Ciao. -
I have a screen problem with my iPad3. Something has caused the screen to get extremely bright and all the colors to appear wrong. It's as if they have all reversed. I have both restarted and reset it a number of times but it won't correct. All apps have been closed out completely. Operating system is 6.1. This has happened twice in the past but a reset corrected it. I have no idea what might have caused this either time. Any ideas for help would be appreciated.
Settings > General > Accessibility > Invert Colors??
-
Screen problem ( yellow hue ) ???
I had received the Sony Xperia Z1 today from O2.ie (Ireland) and I have a screen problem ( yellow hue ) ???
I have tried with and without X-Reality
I tried taking different photos and different places but all my photos came out with a bit of yellow hue in it.
Especially the front camera came out way too yellow.
I also tried to take the photo with Iphone5 in the same lighting area but the Iphone5 didn't came out yellow as I used the sony xperia Z1.
Is there something wrong with the screens ?
Or any problem with the processing system ?
Do you have any idea to solve this problem ?
Hope to hear from you soon.
If you would like to see the comparison photos I can send you by e-mail.
Regards ,
NatthawutYes
I tried taking different photos and different places in low light but all my photos came out with a bit of yellow without using a flash
Front camera Z1 - above
Front camera Iphone 5 - above
Back camera Z1 - above
Back camera Iphone 5 - above
tried to take the photo with Iphone5 in the same lighting area but the Iphone5 didn't came out yellow as I used the sony xperia Z1.
Is there something wrong with the screens ?
Or any problem with the processing system ? -
Hello i have a unusual problem,anyway my iphone 4 wont turn on and when someone calls they hear ringing,but my phone doesent ring.So i poen simcase and now ring off. Screen is just black,because it's turned off..Please help me to solve this problem..Thanks
As far as trying to power up your device, make sure it has a good charge and then hold the button on the top of the phone and the home button on the faceplate together until the apple appears on the screen.
-
On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?
I have find the codec installed on my PC do you see an undesirable one I have highlighted the one that seems strange should I uninstall how can I do this safely
Daniel
Codecs audio
Type
Nom
Format
Binaire
Version
ACM
Codec Microsoft IMA ADPCM
0011
ACM
CODEC A-Law et u-Law Microsoft CCITT G.711
0007
ACM
Codec audio Microsoft GSM 6.10
0031
ACM
Codec Microsoft ADPCM
0002
ACM
Fraunhofer IIS MPEG Layer-3 Codec (decode only)
0055
ACM
Convertisseur PCM Microsoft
0001
DMO
WMAudio Decoder DMO
0160, 0161, 0162, 0163
WMADMOD.DLL
6.1.7601.17514
DMO
WMAPro over S/PDIF DMO
0162
WMADMOD.DLL
6.1.7601.17514
DMO
WMSpeech Decoder DMO
000A, 000B
WMSPDMOD.DLL
6.1.7601.17514
DMO
MP3 Decoder DMO
0055
mp3dmod.dll
6.1.7600.16385
Codecs vidéo
Type
Nom
Format
Binaire
Version
ICM
Microsoft RLE
MRLE
msrle32.dll
6.1.7601.17514
ICM
Microsoft Vidéo 1
MSVC
msvidc32.dll
6.1.7601.17514
ICM
Microsoft YUV
UYVY
msyuv.dll
6.1.7601.17514
ICM
Codec Intel IYUV
IYUV
iyuv_32.dll
6.1.7601.17514
ICM
Toshiba YUV Codec
Y411
tsbyuv.dll
6.1.7601.17514
ICM
Codec Cinepak de Radius
cvid
iccvid.dll
1.10.0.13
DMO
Mpeg4s Decoder DMO
mp4s, MP4S, m4s2, M4S2, MP4V, mp4v, XVID, xvid, DIVX, DX50
mp4sdecd.dll
6.1.7600.16385
DMO
WMV Screen decoder DMO
MSS1, MSS2
wmvsdecd.dll
6.1.7601.17514
DMO
WMVideo Decoder DMO
WMV1, WMV2, WMV3, WMVA, WVC1, WMVP, WVP2
wmvdecod.dll
6.1.7601.18221
DMO
Mpeg43 Decoder DMO
mp43, MP43
mp43decd.dll
6.1.7600.16385
DMO
Mpeg4 Decoder DMO
MPG4, mpg4, mp42, MP42
mpg4decd.dll
6.1.7600.16385
De : sarika02
Envoyé : 17 juin 2014 19:26
À : Daniel Cloutier
Objet : On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?
On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?
created by sarika02 <https://forums.adobe.com/people/sarika02> in Photoshop Elements - View the full discussion <https://forums.adobe.com/message/6466796#6466796> -
Apple macbook pro with retina display is having yellow screen problems in which screen is not perfectly white and is yellowish. More over the service frm apple's part is ridiculous as they have faulty spare part. Does ne1 hv email of senior person?
Apple service centre employee told me that they do not have this 14 day offer in India.
And My mac book pro is taken in by Service centre people to run test etc and I will be informed the next day if they accept it as a fault or not ?
I feeling ridiculously bad. -
Been using an Avastor HDX-800 for storage and backup, also a SUPERDISK for smaller stuff; recently the SUPERDISK does not appear on the screen, and the light blinks while you hear it spin, also the Avastor has started to have the same problem, both USB conncected, both worked well before, but both now spinning, blinking, and not showing up on the screen as before,
Interestingly they both appear in the System Profiler, but just not working the same as before
I have tried other USB ports, but the same responce,yes I did reset the PRAM, but no benefit, still the same problem
my usb devices are: keyboard, mouse, printer, SD-USB-M3, and LaCie d2 DVDRW:
the mouse and printed are plugged into the keyboard: i have tried to move, these around, and have even tried just the mouse, printer and SD-USB-M3, but still the same problem
here is a cut and paste of the current "System Profiler>Hardware>USB" (usb device tree)
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0026
PCI Revision ID: 0x0000
PCI Vendor ID: 0x106b
Bus Number: 0x18
Hub in Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1002
Vendor ID: 0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version: 1.00
Bus Power (mA): 100
Speed: Up to 12 Mb/sec
Manufacturer: Brother
Product ID: 0x0008
Serial Number: L9J286292
Vendor ID: 0x04f9
Basic Optical Mouse:
Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x0084
Vendor ID: 0x045e
Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x0204
Vendor ID: 0x05ac (Apple Computer, Inc.)
SuperDisk USB 120MB drive:
Version: 0.0e
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Imation
Product ID: 0x0002
Vendor ID: 0x0718
Hub in Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1002
Vendor ID: 0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version: 1.00
Bus Power (mA): 100
Speed: Up to 12 Mb/sec
Manufacturer: Brother
Product ID: 0x0008
Serial Number: L9J286292
Vendor ID: 0x04f9
Basic Optical Mouse:
Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x0084
Vendor ID: 0x045e
Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x0204
Vendor ID: 0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version: 1.00
Bus Power (mA): 100
Speed: Up to 12 Mb/sec
Manufacturer: Brother
Product ID: 0x0008
Serial Number: L9J286292
Vendor ID: 0x04f9
Basic Optical Mouse:
Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x0084
Vendor ID: 0x045e
Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x0204
Vendor ID: 0x05ac (Apple Computer, Inc.)
SuperDisk USB 120MB drive:
Version: 0.0e
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Imation
Product ID: 0x0002
Vendor ID: 0x0718
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0026
PCI Revision ID: 0x0000
PCI Vendor ID: 0x106b
Bus Number: 0x19
LaCie d2 DVDRW USB:
Capacity: 451.76 MB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk2
Version: 0.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: LaCie
OS9 Drivers: No
Product ID: 0x1011
Serial Number: FFFFFFFFFFFF
S.M.A.R.T. status: Not Supported
Vendor ID: 0x059f
LaCie d2 DVDRW USB:
Capacity: 451.76 MB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk2
Version: 0.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: LaCie
OS9 Drivers: No
Product ID: 0x1011
Serial Number: FFFFFFFFFFFF
S.M.A.R.T. status: Not Supported
Vendor ID: 0x059f -
Hi i have a white screen problem with my macbookpro mid2009 15".I installed a ifixit battery and i think it screwed up one owc ssd drive.I just installed a new one and at 13min battery left it shut down and then all i got was a white screen...I tried every feasible command and all i got was some more white lol.I dont have my tools to open the case right now but do you guys think my cpu board is done?
Have a look at this help document for suggestions that you haven't tried yet:
http://support.apple.com/kb/TS2570 -
I have a tiny problem that is driving me mad. When I am playing an album in iTunes using cover flow view (with the playlist beneath the artwork picture) the picture is exactly above the album title. All is symmetrical. When I switch to full screen display, the artwork moves a couple of inches to the left and the display is therefore asymmetrical. Why and how do I correct it? It would drive you mad to.
Thanks for any help,
GrahamI was having the same problem, but tried the "Top Button + Home Button" reset and that did work for me. My unofficial guess is that perhaps RAM caches get filled through daily use of various apps leaving no memory for cover flow. Resetting the phone on the phone itself seems to reset that RAM. I can't say it's a cure-all, but it solved my issue. Hope this helps.
-
My creative cloud desktop screen is blank. I apparently have a OOBE problem but my chat session was interupted right when I was getting the steps to fix it.
>desktop screen is blank
Or, the steps in these links
BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html
Maybe you are looking for
-
Can't delete all my pictures anymore
I've previously deleted all of my pictures on my Windows desktop, but this time when I tried, it gave me this error as I had finished backing them up onto my external hard drive "____ (whatever the name of the folder is) could not be deleted. The dev
-
Jolt 1.2/Tuxedo 6.5
I'm working on Tuxedo 6.5/Jolt 1.2 in a Websphere 3.02 environment. 1. Problem with Transaction and Session pools Our application retreives information from an Informix database through servlets. We've built a SessionPool in order to access our Tuxed
-
For a Oracle htmldb workspace developer user I defined a database link to a oracle user on another server with oracle version 8.1.7. When I try to update a record in a table in that other database I get te following message: ORA-20001: Error in DML:
-
HT1212 What if the backup is putting in that passcode every time that I have forgotten?
Okay so everytime I go to restore to an old backup the old passcode automatically is put onto the iPhone so I can't access it because I don't remember it.... A) What do I do now? B) Itunes is now saying this everytime I go to restore: "iTunes could n
-
SAP SSM 7.0 documentation
Hi, is there any documentaiton for ssm 7.0, some documentation for developing. some link. Thanks for advice