RA&R 5.3 - Roles with Violations displays figures as negative

Good day All.
RA&R > Informer tab > Role Analysis - The Roles with Violations figure is negative
Roles with Violations* -1,606 -40%
Moreover the Role with no Violations figures look skew. The % figure is greater that 100%
Roles *with no Violations 5,596 140%
Has anybody had this issue and resolved it?
I have scheduled the batch jobs (full synch) with the hope that this will resolve the issue.
Thank you.

Hi Lads
I have the same issue ,we have upgraded from 5.2 to 5.3 AC and we are on SP4
and also I have noticed another thing when i run risk analysis the levele of the risk isnt put out .
instead it says
"Exception!!. No relavent language message available in database for :0291"
I have already uploaded the error message txt file .
SAP has give me the script and results etc .they say they are investigating the issue.
Regards
Pieter

Similar Messages

Hi,report like roles with groups display?

i am having roles /groups like following
String arrRoles = {"devloper","admin","manager","clerk","other"};
String arrGroups={"grp1","grp2","grp3","grp4","grp5","grp6"};
each groups having separate access
grp1 roles manager,developer
grp2 roles manager,clerk,other
grp3 roles clerk,admin
grp4 roles other
grp5 roles manager,develoepr,admin,clerk,other
grp6 roles clerk,other
finally after reading two array values and each group roles ,
i need to values in report like this
report
role grp1 grp2 grp3 grp4 grp5 grp6
devloper yes no no no yes no
admin no no yes no yes no
manager yes yes no no yes no
clerk no yes yes no yes yes
other no yes no yes yes yes
i need to display values if the group having role need to display
yes otherwise no.
can any one help me how to do and display
here roles and groups are not fixed values both are dynamicaly
created arry objects
thanks in addvance
sai

hi,
thanks for your example.
any way i solved this issue my self another way.
class Report3Test
     public static void main(String str[])
          String[] arrRoles = {"develop","admin","manager","clerk","other"};
          String[] arrGroups = {"grp1","grp2","grp3","grp4","grp5","grp6"};
          String arGrp1[] ={"manager","develop"};
          String arGrp2[] ={"manager","clerk","other"};
          String arGrp3[] ={"clerk","admin"};
          String arGrp4[] ={"other"};
          String arGrp5[] ={"manager","develop","admin","clerk","other"};
          String arGrp6[] ={"clerk","other"};
          String DELIMINATOR = "\t";
          String strGroups = "";
          strGroups = "Roles"+DELIMINATOR;
          for(int i =0; i<arrGroups.length;i++)
               strGroups = strGroups+arrGroups[i]+DELIMINATOR;
          System.out.println(strGroups);
          for(int i =0; i<arrRoles.length;i++)
               String groupStatus1 = "No";
               String groupStatus2 = "No";
               String groupStatus3 = "No";
               String groupStatus4 = "No";
               String groupStatus5 = "No";
               String groupStatus6 = "No";
               for ( int k =0; k<arGrp1.length;k++)
                    if(arGrp1[k].equals(arrRoles))
                         groupStatus1 = "Yes";
               for ( int k =0; k<arGrp2.length;k++)
                    if(arGrp2[k].equals(arrRoles[i]))
                         groupStatus2 = "Yes";
               for ( int k =0; k<arGrp3.length;k++)
                    if(arGrp3[k].equals(arrRoles[i]))
                         groupStatus3 = "Yes";
               for ( int k =0; k<arGrp4.length;k++)
                    if(arGrp4[k].equals(arrRoles[i]))
                         groupStatus4 = "Yes";
               for ( int k =0; k<arGrp5.length;k++)
                    if(arGrp5[k].equals(arrRoles[i]))
                         groupStatus5 = "Yes";
               for ( int k =0; k<arGrp6.length;k++)
                    if(arGrp6[k].equals(arrRoles[i]))
                         groupStatus6 = "Yes";
               String roleParam = (String)arrRoles[i];
               System.out.println(roleParam+DELIMINATOR+groupStatus1+DELIMINATOR+groupStatus2+DELIMINATOR+groupStatus3+DELIMINATOR+groupStatus4+DELIMINATOR+groupStatus5+DELIMINATOR+groupStatus6);
===================
sai

As a stockholder, I would like see the development of iTV with Retina display and integrating Siri control, internet access, and iTunes apps. This new product would be a large screen, thin wall mounted television, much like a oversided iPad.

As a stockholder, I would like see the development of iTV with Retina display and integrating Siri control, internet access, and iTunes apps. This new product would be a large screen, thin wall mounted television, much like a oversided iPad.
Do you think this product is possible?

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

How to create authorization role for just displaying query prefix Q and X.

Hi Expert,
I hope someone can help me on how to create authorization role for just displaying and executing BEX Queries prefix Q and X. I'm currently using SAP BI 7.1.
Actually, I already created one role called : Z_FORINDO_ONLYDISPLAY_QX
where I only put in the Authorization Component (in the Role Maintenance - Tcode 'pfcg'):
-->Manually Business Information Warehouse
--> Manually Business Explorer - Components
Activity : Display, Execute, Enter, Include, Assign
InfoArea : *
InfoCube : *
Name(ID) of a reporting component : *
Type of a reporting component : Calculated key figure, Restricted key figure, Template structure
--> Manually Business Explorer - Components
Activity : Display, Execute
InfoArea : *
InfoCube : *
Name(ID) of a reporting component : Q* , X*
Type of a reporting component : Query
But, the problem is I still can make changes on that queries (Q* and X*). Even, I still can run query with prefix Z. I use S_RS_RREPU Tamplete for Query Display and execution.
Please assist. Very much appreciate your help. Thanks.
Edited by: nadiyah salleh on Mar 18, 2008 11:22 AM

Question close. This issue has been resolved.

Roles for only display authorizations

Hi Experts,
Can any one suggest me how to creat the role only for display authorizations for basis.
Is any standard role like this? if it is please let me know.
Thanks & Regards.
Reddy V

n k wrote:>
> Hi,
>
> just give the tcodes required with the display activity, that is 03.
I consider that to be dangerous advice because it assumes that activities are checked in all transactions.

NVIDIA OpenGL driver lost connection with the display driver

Alienware M14x Laptop
Windows 7-pre 64-bit
8gb ram
3gb Video: NVIDIA GeForce GT 555M
Intel i7 2760QM
AE CS4
AE keeps crashing. I get the following message while doing something as simple as scrubbing through the timeline, or changing opacity of a layer. in 1080p, I have a picture layer, a solid, some color corrections, and that's it. i just got this new computer and i have never had this problem on my old computer.
this message appears after AE crashes."The NVIDIA OpenGL driver lost connection with the display driver and is unable to continue. The application must close."
this message appears in the taskbar: "Display driver stopped responding and has recovered. Display driver NVIDIA Windows kernel Mode Driver, Version 267.21 stopped responding and has successfully recovered"
any ideas on how to stop AE from causing my display driver to stop working?
Thanks, Ramzi Rebeiz

For anyone picking up this thread (it's probably too late for rrebeiz40 by now!) I have come across a simple but apparently very effective tip that has solved the 'OpenGL driver lost connection' issue for many people using various NVIDIA with various Adobe progs (incidentally a lot of these seem to crop up on Dell machines, especially Notebooks).
(It fixed my issue with Premiere Pro CS4 - GeForce GT 555M on Win 7 Ultimate 64-bit, Dell XPSL702X).
It's posted on http://forum-archive.developer.nvidia.com/index.php?showtopic=5331&st=40 (look for the last post, No 50) as follows:
THIS FIX APPEARS TO WORK...found on an Adobe forum
"This issue led me to this fix: go to NVIDIA Control Panel --> Manage 3D Settings --> Global Settings, and switch "Power Management Mode" to "Prefer Maximum Performance" (the default "Adaptive" setting seemed to be the culprit). And that's it! The key here is changing the "Global" setting, as my individual programs were already set to "Prefer Maximum Performance." I can cause the error to reoccur by changing back to "Adaptive."
Otherwise lots more ideas on this site: http://www.instructables.com/id/How-to-Fix...Nvlddmkm-Error/
My PC has been running for 2 days now. I only put the top fix in for now. Feel happier I have more options if need be though.
Inserted from <http://forum-archive.developer.nvidia.com/index.php?showtopic=5331&st=40>
It worked for me

Analysis Authorization based on Hier node with multiple display hierarchies

Hi guys - I've got a problem where s.o. might have an idea of how to switch on the light at the end of the tunnel, I am currently standing in:
Requirement:
Cost Center Authorization should be given through RSECADMIN, reporting should be possible for any hierarchy that exists for the authorization relevant info object.
Preferred solution:
The Cost Center Analysis Authorization should be given through RSECADMIN - Hierarchy node assignment.
u2022     A dedicated Authorization Cost Center Hierarchy will be maintained in ECC6 as an alternative cost center hierarchy and extracted into BW.
u2022     The RSECADMIN Hierarchy node assignment should be based on a particular node (Type 2).
u2022     The display level will be specified as required (here: Level 7)
u2022     The Authorization granted should be independent of hierarchy name and version (validity 3).
Reporting Scenario and technical impact:
As mentioned above, when designing and running a query the user should be able to freely select other (i.e. than the authorization) display hierarchies for the authorization relevant reporting object 'Cost Center' as well. The technical names of the semantically relevant hierarchy nodes could therefore vary. E.g. cost centers 1, 2 and 3, being assigned under hierarchy node u2018Au2019 of the RSECADMIN relevant authorization hierarchy, could be subsumed by hierarchy node u2018Bu2019 in another display hierarchy, which the user may want to display in accordance to his reporting needs. Ideally, the alternative display hierarchy should therefore display node u2018Bu2019.
My findings so far (based on prototyping) turn out that this is not possible as long u2018Bu2019 (and its hierarchy) is not authorized in RSECADMIN. Can these findings be confirmed? And if not, would anyone have an idea of how to facilitate the reporting scenario?
Would there be any other way to grant access, possibly based on RSECADMIN single values, and also enable the user to flexibly display hierarchies with only those hierarchy nodes whose single cost center values the user has been given access to?
Thanks everyone for your input...
Claus
Edited by: Claus64 on Jul 13, 2009 4:10 AM

HI CLause,
On Jul 14 2009, you wrote in SDN and said:
FYI: Found a solution...
The hierarchy analysis authorization will be based on a navigational attribute of cost center.
With analysis authorizations it is possible to declare the Auth object (e.g. 0COSTCENTER__RACCAUT0) as authorization relevant and leave the superior object 0COSTCENTER auth irrelevant.
The auth will be given for 0COSTCENTER__RACCAUT0. This object will be placed as a filter of the query, being restricted by an Authorization variable for hierarchy nodes.
Due to the concept of Analysis Authorizations, this variable will automatically pick up the nodes granted as part of RSECADMIN Hierarchy based Authorization.
As mentioned above, 0COSTCENTER as the regular reporting characteristic remains auth irrelevant and can therefore take any hierarchy thatu2019s available. Reporting on single values will be possible, too. Only those nodes show up that hold the authorized cost centers in accordance to the authorization.
If the auth relevant 0COSTCENTER__RACCAUT0 is not used in the query definition by either not taking it in as a filter or skipping the Auth variable, the query will launch the message that the authorization is missing. No data show up at all.
Claus
See this thread:
Analysis Authorization based on Hier node with multiple display hierarchies
I am also in the same situation as you and need to understadn your solution. I understand that you created a Nav Attr on 0COSTCENTER and made this auth relevant whilst ensuring that 0COSTCENTER is NOT auth relevant. This is all fine. The issue was you have multiple hierachies for 0COSTCENTER, how did the new Nav Attr help you solve your issue. When loading 0COSTCENTER what values did you load ino the new Nav Attribute and how did that link to the hierachies? Also, in RSECADMIN you created hiearchy nodes based on the Nav Attribute but I am confused as to what values you have in the Nav Attr.
I appreciate if you can share your solution from the past in more details.
many thanks

User command is not getting triggered in interactive ALV with LIST display

Hi experts,
I have developed an interactive ALV report with LIST display. Here, the issue is, when i double click a record in the primary ALV list, the control must go to the USER COMMAND event which i have written in my report. But the user command event is not getting triggered at all when i double click any record.
It gives the following information instead.
"Choose a valid function".
(My user command name and its respective form name are same.)
Here is my code..
START-OF-SELECTION.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      i_callback_program       = sy-repid
      i_structure_name         = p_table
      i_callback_user_command = 'TST1'
      i_callback_pf_status_set = 'SET_PF_STATUS'
    TABLES
      t_outtab                 = <dyn_table>
    EXCEPTIONS
      program_error            = 1
      OTHERS                   = 2.
IF sy-subrc <> 0.
ENDIF.
FORM tst1 USING r_ucomm LIKE sy-ucomm
                rs_selfield TYPE slis_selfield.
* Local data declaration
DATA: li_tab TYPE REF TO data,
        l_line TYPE REF TO data.
* Local field-symbols
FIELD-SYMBOLS:<l_tab> TYPE table,
                <l_wa> TYPE ANY.
* Create table
CREATE DATA li_tab TYPE STANDARD TABLE OF (p_table).
ASSIGN li_tab->* TO <l_tab>.
* Create workarea
CREATE DATA l_line LIKE LINE OF <l_tab>.
ASSIGN l_line->* TO <l_wa>. CASE r_ucomm.
*   When a record is selected
    WHEN '&IC1'.
*     Read the selected record
      READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX
      rs_selfield-tabindex.      IF sy-subrc = 0.
*       Store the record in an internal table
        APPEND <dyn_wa> TO <l_tab>.
*       Fetch the field catalog info
        CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
          EXPORTING
            i_program_name         = 'Z_DEMO_PDF_JG'
            i_structure_name       = p_table
          CHANGING
            ct_fieldcat            = i_fieldcat
          EXCEPTIONS
            inconsistent_interface = 1
            program_error          = 2
            OTHERS                 = 3.
Please advice what is the msitake i have done here..

Read the following code:
pass the i_callback_user_command = g_user_command to the ALV function module and write the FORM user_command USING ucomm    LIKE sy-ucomm
                        selfield TYPE slis_selfield.
as shown below.
thanx
Data for ALV display
DATA : gt_fieldcat TYPE slis_t_fieldcat_alv,
        gt_events           TYPE slis_t_event,
        g_variant LIKE disvariant,
        g_user_command      TYPE slis_formname VALUE 'USER_COMMAND',
        g_status            TYPE slis_formname VALUE 'SET_PF_STATUS',
        gt_list_top_of_page TYPE slis_t_listheader,
        g_repid LIKE sy-repid,
        gf_pos TYPE i
Data for ALV display
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
           EXPORTING
          i_callback_program      = g_repid
             i_callback_program      = sy-repid
             it_fieldcat             = gt_fieldcat[]
       it_events               = gt_events[]
          i_callback_user_command = g_user_command
             i_save                  = 'A'
             is_variant              = g_variant
           TABLES
             t_outtab                = it_print.
FORM user_command USING ucomm    LIKE sy-ucomm
                        selfield TYPE slis_selfield.
CASE ucomm.
    WHEN '&IC1'.
      CASE selfield-sel_tab_field.
        WHEN '1-KUNNR'.
          READ TABLE it_print INTO wa_print INDEX selfield-tabindex.
          IF sy-subrc = 0.
            SET PARAMETER ID 'BPA' FIELD wa_print-kunnr.
            CALL TRANSACTION 'BP'.
          ENDIF.
        WHEN '1-MATNR'.
          READ TABLE it_print INTO wa_print INDEX selfield-tabindex.
          IF sy-subrc = 0.
            SET PARAMETER ID 'JP_ISS' FIELD wa_print-matnr.
            CALL TRANSACTION 'JP29' AND SKIP FIRST SCREEN..
           GET PARAMETER ID 'WRK' FIELD wa_zprint-werks.
           SET PARAMETER ID 'VKO' FIELD wa_zprint-vkorg.
           SET PARAMETER ID 'VTW' FIELD wa_zprint-vtweg.
           CALL TRANSACTION 'JP29' AND SKIP FIRST SCREEN.
          ENDIF.
Endcase.
Endform.

How do I get the most out of my Macbook pro with retina display?

Hi,
I am new to apple had an Iphone and loved it and was drawn in by the advertisment for the new macbook pro with retina display and decided to get myself one. I have pretty much taught myself everything so far and I think I have a basic enough knowledge now of working my way round my mac and was wondering if anyone has any suggestions on how I can look to develop as I feel I have got all the gear but no idea!\
Any suggestions are greatly appreciated,
Cheers

http://www.apple.com/support/mac101/

How do I connect an external microphone to a Macbook Pro with Retina display ?

How do I connect an external microphone to a Macbook Pro with Retina display ?
Alternatively how do I connect an audio input at a level that would normally have gone into a 'line input' socket ?

Plug it into the linein/headphone jack if there's just one. It'll switch between the two modes automatically depending on what you plug into it.

I have Problem with my new macbook with Retina display

my new macbook with Retina display i have Problems
(Suddenly Stuck) stop working don't thing move even mouse even caps lock light in keyboard it not work it is totally Stuck till shutdown it from keyboard and restart

Hmm sounds like a saved application state issue and memory related.. I hate to ask are these graphic intensive apps. ?? games ??
Try these two things and restart if it still occurs then i recommend contacting AppleCare
disable the Resume and App Restore feature completely in Mac OS X 10.7.
Launch System Preferences and click on the “General” icon
At the bottom of the “Number of recent items” list, uncheck the checkbox next to “Restore windows when quitting and re-opening apps”
- Click on the Apple on the top left. Choose shutdown "Uncheck" Reopen windows when logging back in
**use your mac normally just like you were if the issue reoccurs then contact AppleCare.. Enjoy..

TS3775 Hi I am trying to connect my mba mid 2011 with an imac 27" 2011 with target display mode tdm. When I am using a thunderbolt cable nothing will work. When I use a minidisplay cable, both screens turn blue but eventually nothing happens. What is the

Hi I am trying to connect my mba mid 2011 with an imac 27" 2011 with target display mode tdm. When I am using a thunderbolt cable nothing will work. When I use a minidisplay cable, both screens turn blue but eventually nothing happens. What is the problem

Your answer is likely in Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support If you are familiar with this document, please re-read it and I suspect you may find something you either missed or are doing incorrectly.

I am trying to connect a 24" cinema display with mini display port cable to a 24" imac with a displayport - is there a cable for this as these two connections are two different sizes

I am trying to connect a 24" cinema display with mini display port cable to a 24" imac with a displayport - is there a cable for this as these two connections are two different sizes

Hi Gilly,
I have no proof, but I think it will not work with an adapter, only Mini Display Port or Thunderbolt.

The quality of built-in camera on macbook pro with retina display is far worse than any other mac. Why?

I just got the new macbook pro with retina display like a week ago and I've been noticing that the quality of the built-in camera on it is so bad.
It's even worse than my 2009 iMac or my sister's 2012 13" macbook pro. I don't get why this is a facetime HD built-in camera when i can obviously see that is not even near HD. Or is it just my computer. Do i have to bring it to the apple store??

it's advertised 720p so yes it is the same as all the other MBP. it may just be the resolution of your monitor is stretching the pixels. Don't worry about bringing it to the apple store.

Is there a way to digitize audio using the headphone input on the 15-inch (late 2013) Macbook Pro with Retina display?

I'd like to digitize audio from a minidisc player into my 15-inch (late 2013) Macbook Pro with retina display, but can't see a way to change the internal mic input. I understand that previous MacBooks allowed the headphone jack to double as a mic input, but mine doesn't seem capable of switching. I've tried using a mini to mini cable, with no luck, and also tried using a headset splitter adapter (3.5 mm 4-pin to 2x3-pin 3.5 mm headset splitter adapter from Amazon) because I read that that would allow me to plug in headphones and input audio. But in both cases, the only "input" available in my sound preferences is the built-in internal microphone. Am I missing something? Is there a way to digitize audio through the headphone jack?

Not likely. headphone jacks are usually output only devices unless specifically stated to support input, and even then, it may not be audio input that they support, but merely control input for volume and such.
You can get a USB audio input instead. i.e:
http://www.amazon.com/Griffin-Technology-iMic-Audio-Device/dp/B000BVV2IC

RA&R 5.3 - Roles with Violations displays figures as negative

Similar Messages

Maybe you are looking for