RA status on Project : Object Currency update

Hi,
While running RA on a Project , we get message KJ129 which suggests that the RA values will only be updated in CO area currency and not in Object currecny. On further investigation I find that this happens only on Projects which have a status of I0082 ( RA carried out) but not I00295 ( Internal status - RA carried out in Object Currecny) .
The staus RESA ( RA carried out) was set initially then was deactivated and then set up again. This might be because the RA data was deleted ( possibly using kka8) many many months ago.
I read few SAP notes ( 485405 for instance) which confirm the observation and suggest that the RA data need to be converted.
Now the question is:
a) Can we reset the internal Status I00295 after which we belive the RA data would be written in both currencies.
b) What is meant by "conversion of the data of the RA"? ( On note 485405)
PS: This is observed only on RA vesrions which are not relevant for settlement and not on version 0.
We have CO area currency type set up as 30 and not 10.

Any Pointers?

Similar Messages

  • Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY- ERROR EVENT_RAISED - Error updating the process object

    Hi All
    I have set up a simple custom HCM process and Form regarding Infotype TO CREATE AND CHANGE POSITION. I have checked the process and form consistency and it seems fine. Now when I run the process from HRASR_DT it generates a process number but it also gives an error workflow could not start.I get following error (SWIA log - Step history)
    Executing flow work item - Transaction brackets of the workflow has been damaged
    Exception occurred - Error when starting work item 000000007031
    PROCESS_NODE - Error when processing node '0000000014' (ParForEach index 000000)
    CREATE - Error when creating a component of type 'Step'
    CREATE_WIM_HANDLE - Error when creating a work item
    CREATE_VIA_WFM - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event CREATED and (target) status
    EVENT_RAISED - Error updating the process object
    Executing flow work item - Exit CL_HRASR00_POBJ_WF_EXIT triggered exeception for event STATE_CHG and (target) status READY->ERROR
    EVENT_RAISED - Error updating the process object
    Executing flow work item - Transaction brackets of the workflow has been damaged
    Executing flow work item - Work item 000000007031: Object FLOWITEM method EXECUTE cannot be executed
    Executing flow work item - Error when processing node '0000000014' (ParForEach index 000000)
    Points to be noted:
    1) I have searched few SAP notes such as 1384961(Notes for 6.0.4) but our system is in higher level patch 6.0.5
    2) WF-BATCH have SAP_NEW and SAP_ALL authorization.
    Appreciate your valuable suggestions.
    Thanks
    Ragav

    Hi Ragav
    did you try to debug this? maybe something is missing in config of P&F?
    Since you are on 605, the following note would be there in your system....use it to debug:
    1422496 - Debugging background workflow tasks in HCM P&F
    This will help you find the root cause.
    regards,
    modak

  • System Status of newly added project objects for a RELEASED Project.

    Hi Experts
    During the course of execution of project, we may need to add new activities.
    However, as the project is released, the newly added activtity or project object attains REL status.
    How to ensure CRTD status for the newly created object so that can ensure subsequent release by Higher Authority.
    I think user status may be useful here but i do not know how to set. Please suggest feasible solution.
    Warm regards
    ramSiva

    Release status is PS pass on for PS  Objects. So,  Create two no. of Level one  WBS Element in your PS Structure. One for which you want release that structure you create under that WBS  and Second WBS don't Release and use the same leg for your created status structuring.
    And do not Release Project Definition, Let it be max. PREL only, Till your structuring process is over.
    I think User status cannot help you in this  case.  ( Because user status reside between the System Status )
    With Regards
    Nitin P.

  • How do I disable linked smart-object auto-update/refresh?

    Working in the CC3D features, I am constantly making changes to my bump map. Every time I step-backwards, or make a significant change to the bump texture (smart object?), CC auto-saves the layer. This specific file is a very very large document (3 gigs in the bump texture layer alone), and the 3D layer has lots of lights and is very complex. This auto-refresh/update really bogs down the time that it would take me to make my changes. I have a very fast machine (I know it's fast, I dont need to list my specs), and I have all shadows disabled.
    How do I disable linked smart-object auto-update/refresh?

    If you do not like a feature like smart objects there is nothing forcing you to use it. Use some other features to do what you want. Please don't ask Adobe to introduce bug into smart object support.
    You could work on your bump maps textures in external files. When your done some time in the future you could edit your project with the smart object layer and use replace smart object. Only then will all smart filters be applied to the smart layer with the replaced smart object.
    Or if by CC Auto save Layer you referring to CC Generate feature you can disable that feature.
    I have no idea what your referring to when you write "CC auto-saves the layer" being a feature. I know CC Generate will write layers out as web files but that more a Web feature then a 3d feature.  Where do you see your layer being saved?

  • Status of Prod Order not updated as delta - 2LIS_04_P_COMP

    Hi all,
    We are currently using 2LIS_04_P_COMP to update the data to BI. We have enhanced the DS to include the status of the prod order from table JEST. However it seems that this is not getting updated to BI server whenever prod order change its status. There is a delta queue when I see in tcode LBWQ and then I run the collective update in LBWE and then it will disappear from the queue which is correct. But when I see in RSA7, there is nothing and also I run the infopackage in BI server, it cannot get any data. Anybody has this issue before?
    Many thanks in advance.
    Regards,
    Janet

    The delta will only be captured if the Production Order actually changes. When a change is made to the status of an object in JEST, or JCDS, it doesn't register as a change on the object. Therefore, changes in Production Order status won't invoke a change on the source tables for Production Orders and therefore not get captured on the 2LIS_04_P_COMP or 0PRODORDER_ATTR DataSiources.
    If you need to capture the changes in status for Production Orders, you will have to create a generic DataSource that is sourced by the JEST table and join it with the Production Order in BW.
    Edited by: Dennis Scoville on Sep 17, 2009 8:16 PM

  • Report in Object currency

    Hi,
    Report is generated by using report painter, but report displays  the values in controlling area currency.How we can display values in object currency ?
    Regards,
    Rohit

    Hi,
    We have alredy referred to existing threds but the client requirement is sligtly different. The object currency should be displayed in report. Presently the report displyed in controlling area currency.
    Let me explain in detail, in report we have different co area currency, transaction currency & object currency. Now the report displayes the values in co area currency but actually at selection screen we are giving object currency. Why report displayed in co area currency?  We can chage the currency through currency translation but it is applicable for perticular project. Client requirement is report should automatically pick object currency in disply.
    Regards,
    Rohit

  • TCode to post a Controlling Document in Object Currency only

    Is there a TCode that can be used to post to a secondary cost element but only updating the Object Currency Value?
    I had an issue with our recent periodic Assessment. Some of the posted assessment documents have line items that have  different Object Currency value than that of the CoArea Currency value, even though all  the cost objects are all in USD. The CO Area currency as well as the Co Code currencies are also all in USD.

    Hi,
    You can try using allocation method assessment cycle... Immediately after entering the cycle name... u have option to select in "Field Groups" -->Object Currency.
    Also consider the following documentation on object currency option given by sap...
    Object currency:
    The SAP System calculates sender values in object currency separately and distributes them separately. This only works if the object currency of all the objects (for example, cost centers or orders) is the same, since no conversion between object currencies takes place during processing.
    For example, it is not possible to distribute a sender value to a receiver with a different currency. If this type of error occurs during processing, a warning is issued and the SAP System processes the object currency as if the indicator is inactive.
    If the indicator is inactive, the object currency being posted is determined from the controlling area currency by converting it to the object currency of the sender or receiver when the sender credit/ receiver debit is posted.
    Example
    The controlling area currency is USD.
    Sender A distributes 50% each to receiver B and C.
    The posted values on sender A are in object currency:
    DEM 1000.00
    For receiver B and C, object currency DEM is also set.
    If "Object currency" is activated, the following values result from sender A and receivers B and C:
    Sender A Receiver B Receiver C
    1000 DEM
    -1000 DEM * 500 DEM * 500 DEM *
    If "Object currency" is activated, the SAP System updates the values in object currency beside the controlling area currency and posts three line items (*).
    If it is not active, the following values result:
    Sender A Receiver B Receiver C
    1000 DEM
    - 590 USD * 295 USD * 295 USD *
    If "Object currency" is inactive, the SAP System only shows the controlling area currency and posts three line items (*).
    If receivers B and C have different object currencies than the sender currency, the SAP System ignores them and posts in CO area currency
    Regards
    Sudhakar Reddy

  • Residual order plan not calculated, in Object Currency for report 12KST1C

    Hello everybody,
    I have a question related to PS report painter Costs reports.
    I have created a form by copying the 12KST1C standard form, and I needed to create it, in order to change it and display the data (Costs, actual, commitment and so on) in <b>Object currency</b>, instead of CO Area Currency.
    The CO Area currency is USD and I need the reports in ARS (Argentinean Pesos)since the project objects (WBS elements, activities, etc) are in ARS too and I do not want to make a currency convertion to a specific date.
    So I created the Z12KST1C and change the ratios of the columns to Object Currency.
    The problem is that the Remaining order plan or Residual Order plan column, which is calculated at the runtime of the report is not showing any amount, while when I run the report in CO Area currency it shows the amount OK.
    I would like to know if that column (Residual Order plan) is only calculated in CO Area currency, or If I have to make adjustements to my form. Any ideas???
    I have read several SAP notes like 668240 (2 F) but I still do not see that amount calculated in Object currency.
    Thanks in advance
    Kind regards
    Pablo

    It really worked fine. Thanks a lot for your response to this issue.
    Kind regards
    Pablo

  • Can I use PA period date for Project Functional currency exchange rate instead of EI Date?

    Hi,
    We are planning to enable project currency for our projects. However while testing we have encountered one challange. We want to use PA date for all our currency conversions. However Oracle uses EI date to convert project functional currency transactions.
    Does anybody know any setup or solution to convert all expenditure item transactions based upon PA date instead of EI date? Help / Solutiion on this regard is highly appriciated.
    Thanks & Regards,

    Hi,
    Do u mean you have already done your Trx in EI Date and now u want to use PA Period Ending Date?
    Please Correct me if i'm wrong, u want to update all the Trx from EI Date to PA Period Ending Date?
    If you update from EI Date to PA Period Ending Date, this will only be applicable to Future Trx's not for the one's already incurred.
    Regards
    Ragahavender K

  • TerminalServices-RemoteConnectionManager Event ID: 1057: The relevant status code was Object already exists.

    The computer is Windows 7 Professional 64-bit edition version 6.1 Build 7601 service pack 1. The computer is not in a domain environment. I believe this may be a security issue however I completed an in-place windows 7 upgrade to try and fix the problem
    but after all of the windows updates, etc the error remains and appears every time the computer is rebooted...
    I could use some help with the following error:
    Log Name:      System
    Source:        Microsoft-Windows-TerminalServices-RemoteConnectionManager
    Event ID:      1057
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Description:
    The Terminal Server has failed to create a new self signed certificate to be used for Terminal Server authentication on SSL connections. The relevant status code was Object already exists.
    Provider Name="Microsoft-Windows-TerminalServices-RemoteConnectionManager"
    Guid="{C76BAA63-AE81-421C-B425-340B4B24157F}"
    EventSourceName="TermService"
    I found {C76BAA63-AE81-421C-B425-340B4B24157F} in my registry in the:
    HKey_LOCAL_MACHINE -> SOFTWARE -> Microsoft -> Windows -> CurrentVersion -> WINEVT -> Channels -> Microsoft-Windows-TerminalServices-RemoteConnectionManager/Admin -> OwningPublisher
    HKey_LOCAL_MACHINE -> SOFTWARE -> Microsoft -> Windows -> CurrentVersion -> WINEVT -> Channels -> Microsoft-Windows-TerminalServices-RemoteConnectionManager/Analytic -> OwningPublisher
    HKey_LOCAL_MACHINE -> SOFTWARE -> Microsoft -> Windows -> CurrentVersion -> WINEVT -> Channels -> Microsoft-Windows-TerminalServices-RemoteConnectionManager/Debug -> OwningPublisher
    HKey_LOCAL_MACHINE -> SOFTWARE -> Microsoft -> Windows -> CurrentVersion -> WINEVT -> Channels -> Microsoft-Windows-TerminalServices-RemoteConnectionManager/Operational -> OwningPublisher
    Microsoft-Windows-TerminalServices-RemoteConnectionManager
    %SystemRoot%\system32\termsrv.dll
    When I open as administrator a command prompt window and enter the follow: regsvr32 termsrv.dll
    I get the following message:
    RegSvr32
    The module termsrv.dll was loaded but the entry-point DllRegisterServer was not found.
    Make sure that termsrv.dll is a valid DLL or OCX file and then try again.
    Not sure if this is a problem or if this behavior is expected...
    I ran sfc /scannow and check disk on the hard drive with both reporting no errors.
    I updated the security profile for:
    [Computer Configuration\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Security]
    In the right pane, double click "Require use of specific security layer for remote (RDP) connections", in the security layer list, select RDP.
    I modified the policy and there was no change in computer behavior.  The error still appears each time the computer is reboot.
    ===
    I found a semi-related webpage that at least lists the same Microsoft-Windows-TerminalServices-RemoteConnectionManager and 1057. However I'm running Windows 7 64-bit edition and I seriously doubt I have a lack of available memory issue.
    Event ID 1057 — Terminal Services Authentication and Encryption
    http://technet.microsoft.com/en-us/library/cc775192%28v=ws.10%29.aspx
    Physical Memory (MB)
    Total 24567
    Cached 6337
    Avaiable 21821
    Free 15709
    The relevant status code says that the "Object already exists" which I think is far more relevant then some memory issue. Do I have to delete some file or registry entry? Or is it a security issue?
    Google search have come up with nothing. Any suggestions would be very helpful!

    Have a solution for you:
    Download makecert.exe and generate new cert for RDP
    makecert -r -pe -n "CN=server FQDN"  -eku 1.3.6.1.5.5.7.3.1 -ss my -sr LocalMachine -sky exchange -sp "Microsoft RSA SChannel Cryptographic Provider" -sy 12"
    Change server FQDN with real value.
    Go to computer certificates and under remote desktop delete current certificate. Then from personal store move the newly created cert to Remote Desktop.  Open the cert and copy Thumbprint.
    Open regedit and go to:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\WinStations
    Update SelfSignedCertificate key with new cert tumbprint.
    Restart Remote Desktop Services service

  • What is the BAPI Name to chg status of Project def/WBS element.

    HI ALL,
    Can anybody tell me is there any BAPI which will change the
    status of Project Definition or WBS element and  also update
    JCDS table data?
    for eg. TECO(technically comlpited)-> CLSD(closed)
    I want to do this by any FM instead of BDC.
    can anybody help me inthis regard?
    Thanks,
    MM

    Hi Deepak,
    We have tried the given BAPI, but it is only used at WBS level.
    our requiremnet is that when Project definitions system status is changed, then it should chg the system status of WBS as well as Network..  We got the BAPI for this named"
    BAPI_BUS2001_GET_STATUS.. this is used to chg the status of Project and corresponding WBS but does not chg the Network. but in this BAPI also we are passing following
    project but we are getting error  like
    Project _def: 40co-9001937
    undo_system_status: DLFL
    when execute, it given error like Error in processing FM was not executed.
    can any one tell me why i am getting this kind of error
    and also other BAPI name which will chg the status at all 3 levels like Pro Def, WBS and Network..
    Regards,
    MM

  • Cost center planning data-Plan Variable Costs in Object Currency

    Dear All:
    I have copied a standard planning layout and for the field, 'Planned Fixed Cost' and 'Planned Variable Cost', I have selected 'Plan Variable Costs in Object Currency' and 'Plan Fixed Costs in Object Currency' as the Key Figure.
    I am doing this because our Controlling Area currency is TWD and the other company will upload the planning data in RMB .
    However when I do the above settings and try to save, I am getting the following errors.
    The column 'Plan Fixed Costs in Object Currency' can input correctly but the column 'Plan Variable Costs in Object Currency' canu2019t be update in KP06 .
    ex.
    Planner profile: SAPALL
    layout :1-101
    I can't update the column "Plan Variable Costs "
    I copy the layout 1-101 and change the column to  'Plan Fixed Costs in Object Currency' and it  still can't input variable cost
    BR,
    Carol

    Hi Carol
    I have done this many times and never faced this issue
    Just delete the copied layout and Copy it again from 1-101....
    May be delete the existing columns of the layout and choose the desired key figure of object currency
    Then assign the layout to Planner Profile
    Regards
    Ajay M

  • Changing "material status" via "project transfer"

    HI,
    I known that I can change the "material status" by transferring an item to a specific stock Locator that I already defined.
    Is it possible to change the material status via project transfer?
    For example my item's status is "active" and it was assigned to a project named "ACTV_PROJECT" I transfer this Item
    to a random locator whose project is "HOLD_PROJECT". while I perform this transaction, item status will become "HOLD" (Hold is a status that I already defined)
    Thanks for your
    Help
    Ceyhun

    Hi
    I assume you refer to Item Status Control.
    You can update the item status code using the designated form Item Status. This will automaticlly update the values of the following attributes -
    BOM Allowed
    • Build in WIP
    • Customer Orders Enabled
    • Internal Orders Enabled
    • Invoice Enabled
    • Transactable
    • Purchasable
    • Stockable
    Project Transfer is a inventory transaction, that moves certain quantity of the item from one project locator to another project locator. Such transaction is not changing the item status.
    Dina

  • Field Object Currency in Cycle-Header

    Hello,
    I wrote a report to migrate cycles.
    In the cycle header there is a field "object currency".
    does anybody know to which table (T811? ) this field belongs?
    I thought T811C, but cannot find it.
    Kind regards
    Udo

    Hi Sumant,
    This is system default, you can't do any financial activity without Currency, and Company Code, there is no setting or configuration available to make these field optional, irrespective of any fields Status group.
    You need to think, what you can do with out Company Code, and company code is organizational unit of Financial Accounting for which a complete self-contained set of accounts can be drawn up for purposes of external reporting.
    This includes recording of all relevant transactions and generating all supporting documents required for financial statements, such as balance sheets and profit and loss statements. So you cannot enter data in SAP without company code and currency, this is system default.
    However some field status can be control, read below:
    -  you can control field status for Master data (Customer T.Code OBD2, Vendor T.code OBD3, and GL Account T.code OBD4) through Account Groups,  and for master data you have four options i.e. Suppress, Required, Optional and Display.
    -  You can control transaction field by Field Status Group, and  Field Status group Posting Keys T.code OB41, here you have three options i.e. Suppress, Required Field and Optiional.
    - Document header text, or reference field you can set mandatory from document type, T.code OBA7
    I hope this will clear your query.
    Regards
    Javed

  • Difference betwen object currency,area and transaction currency

    Hello all
    what is the difference betwen object currency,area and transaction currency.
    and frome where i can change it?
    Thanks

    Check this link for currencies in Controlling:
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/02/30793485231774e10000009b38f83b/frameset.htm
    By understanding their definition from the above link, am sure you'll also understand the difference (or the purpose) of them.
    Changing the currencies, after the transaction data posted is not easy, even if possible in some cases. I'm sure this question of yours is in academic interest, rather than a project need.
    Hope this helps.

Maybe you are looking for

  • With multiple events in a single event case, how to associate value with the correct object?

    I am playing with the template where an event structure takes note of user inputs and a main state machine is then used to respond to these inputs. When I only monitor one control I use the 'NewVal' output to read out the changed value. But when I mo

  • Control Key for Quality Management in Procurement

    if we activate Control Key for Quality Management in Procurement in material master then wether we need  also store a control key at the plant level for quality management in procurement. if we want want to maintaine pls tell me how it is pls expalin

  • Check out the DROID 2 - video!

    hey folks - There's a new post over at the DROID Community blogs; check out the DROID 2 features video, and let us know what you think! http://community.vzw.com/t5/DROID-Community-Blogs/Check-out-the-DROID-2-video/ba-p/265267 And let us know what you

  • MacBook Pro LCD Issue

    I have an aluminum MacBook Pro 15" with Intel core 2 duo and GeForce 8600M GT. Starting from this evening, the LCD screen shown for the whole size, many vertical green lines 1 pixel widht. The external monitor connected to the DVI work well, so it se

  • The latest Photoshop and Illustrator CC : hand tool with space bar

    After updating to CC (photoshop14.2 & illustrator 17.1), the hand tool is not active with space bar. Would really like a solution. I couldn't solve by deleting preference files.