RA with the same User for 6 Remote client

Hi Netpro
i have acs 5.2 with asa 5520 , i have the /29 subnet for RA , how can i allow 6 remote access client  to use the same username like U1,
thanks
jamil

Hi Ibrahim,
Please add the following command to the specific group-policy:
group-policy your_group-policy attributes
vpn-simultaneous-logins 6
On ACS make sure you do not have any restrictions for the amount of simultaneous connections with the same username.
HTH.
Please rate any helpful posts

Similar Messages

  • I have purchased a from within an app. I submit my password for the app, and then my Apple ID.  I then get the following messages "Regrant failure _ please log in with the same user that has bought this app"  and that is followed  by "cant conn with IT _

    I have purchased an item from within the app PocketBible on my iPad.  However when I try to download it I am asked for my app User Name and Password and then my Apple ID and password.  I give both of these.  I then get a message which says Regrant failure - Please log in with the same user that has bought the app.  That is then followed by  Pocket Bible Alert - cannot connect to iTunes Store.
    Anybody got any ideas, both what the 1st alert means and how I get round the problem please.

    I had the same problem. My wife had the PocketBible on her Ipad 2 and she transferred ownership to me. I had to delete the app and reinstall it from the App store(logged in with my apple ID) and its working without a problem. I do not get those error messages when I attempt to Buy/Upgrade or Add/Remove books.

  • How to conf  in Hyperion, so the system couldn't login with the same user

    Hai.....
    how to configure in Hyperion, so the system couldn't login with the same user id in different machine ? (could you please provide me with detail step by step ? )
    rgds
    uka fp

    fane_j wrote:
    Sally R. wrote:
    Someone gave me a suggestion to go to the terminal and type in the following:
    ls /Users/Shared/.*.so
    This was published on MacWorld's site, and it's not a very good tip. Try this instead
    ls -la /Users/Shared/*.so
    Turns out I was wrong about that. Somebody else suggested something even more complicated and got this reply:
    By bastion
    Fri Feb 24 08:49:05 PST 2012
    PeterSParker said
    Your terminal statement has an extra "." in it that prevents it from working.
    Also, you should add the options -alR to show what is happening, and to search subdirectories.
    The revised command looks like this:
    ls -alR /Users/Shared/*.so
    The above is completely wrong. The command as shown in the article is appropriate.
    The "." is not extra and doesn't prevent the command from working. It's specifying that you're listing files that start with a period and end with ".so" with anything in between being matched.
    Because you're explicitly searching for things that start with "." you don't need the -a flag.
    Because you only care about simple existence and not any metadata you don't need -l.
    Because the files of interest are installed in /Users/Shared directly, and not subfolders thereof, you don't need -R.

  • Logging on with the same user?

    Hi all,
    I know there is some rule that allows a user to log on more than once. A client of mine says they could always log in to the same company twice with the same username, but now they can't. They can only log on to 2 different companies with the same user name.
    Was there a change made or am I missing something? I have tested on a single computer. I open 2 instances of SAP Business One 2007 and log in with the same user into the same company. THe first one logs on fine, the second one says "This user is already connected to this company". If I log on to a different company with that user it logs in.
    I really thought you could log on with the same user to the same company.
    The company has a distributed environment and people run around every now and again logging on at different computers (especially supervisors). This is a critical issue for them.
    Please help
    Thanks,
    Adele

    Adele,
    I am not sure if you might have changed the default layout of SQL Management Studio, so you should
    log on to Management Studio and go to Menu 'Window' -> 'Reset Window Layout'.
    This will restore the default layout, which usually is the very same after a fresh SQL Server 2005 installation.
    Now you should find on the left hand side the so called Object Explorer. In the Object Explorer Window you should see the SQL Server name, below of this should be
    SQL Server name
    +Databases
    +Security
    +Server Objects
    +Replication
    -Management
          +Mantenance Plans
          +SQL Server Logs
              Activity Monitor
    +Notification
    Maybe there are some more entries, depending on the options choosen during installation.
    Kind regards
    Mario Schoenberg
    Senior Support Consultant
    SAP Business One Forums Team

  • How can I get Firefox to run on a network with multiple users logging on with the same user name and password?

    I am trying to get Firefox running on a large network where I have multiple users that log on with the same user name and password. The problem is that when another user logs on to another computer the message comes up that their is already an instance of firefox running on that computer even though there really isn't. Only one instance can be run on the network at one time. I believe it is because firefox stores a shared profile as it thinks it is actually the same user even though it is being run on another computer. I repeat that each user that logs on uses the same user name and password but on different computers.

    I am trying to get Firefox running on a large network where I have multiple users that log on with the same user name and password. The problem is that when another user logs on to another computer the message comes up that their is already an instance of firefox running on that computer even though there really isn't. Only one instance can be run on the network at one time. I believe it is because firefox stores a shared profile as it thinks it is actually the same user even though it is being run on another computer. I repeat that each user that logs on uses the same user name and password but on different computers.

  • Extension mobility - can i have 2 extension mobility profiles with the same extension for a 7970 phone and a 7975 phone?

    extension mobility  - can i have 2 extension mobility profiles with the same extension for a 7970 phone and a 7975 phone? thanks

    Yes, or simply configure 1 UDP and default device profile for the other one.
    EDIT: and actually with those models, you should be able to use just one
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmfeat/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100/CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100_chapter_011000.html#CUCM_RF_EDCB3C30_00

  • Can't install Exchange 2013 after previous uninstall (insufficient user privileges with the same user)

    I have installed Exchange 2013 on Windows Server 2012, which ist a member of a Windows Server 2012 R2 Domain. All prerequisites and AD modifications were successfully  completed and I could install Exchange 2013. Unfortunately I made a mistake with
    the target directory and had to uninstal Exchange 2013. If I start the Setup again, it fails in prerequisite check - the current user should not be a member of Enterprise and Schema admin Group, but it's the same user, which comleted the previous Installation
    of Exchange 2013! Do you have any idea how to solve this Problem - I'm running out of ideas.

    Inhave tried to run setup /PrepareSchema again and get the following error in exchange setup log:
    [03.07.2014 19:25:53.0305] [0] Setup encountered a problem while validating the state of Active Directory: Couldn't find the Enterprise Organization container.
    [03.07.2014 19:25:53.0337] [0] Validating options for the 0 requested roles
    [03.07.2014 19:25:53.0383] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Couldn't find the Enterprise Organization container.
    [03.07.2014 19:25:53.0399] [0] The Exchange Server setup operation didn't complete.  More details can be found in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
    After removing all Exchange Parts by ADUC (advanced View) and ADSI Edit (Services) I'm able to install Exchnge 2013 again - the uninstall procedure seems not to work in a clean manner.

  • Different Risk Analysis Results with the same user from 2 different RAR

    Hi..
    I've loaded the same Risks, Rules, etc, into 2 GRC RAR environments (Sandbox and Quality systems); both of them are connected with the same SAP ECC system. But when I do a User Risk analysis (authorization level), the result from Sandbox is different from Quality system. I donu2019t have users or roles mitigated yet, users are synchronized, rules are exactly the same and I donu2019t know what happen??... Please, help me.
    Thanks...

    Hi...
    If I do a Full Sync of users to the same ECC system from both RAR boxes, I got different number of users loaded (i.e. 18757 vs. 18141), similar case with the full sync of roles. (13100 vs.  13150).
    If I load exactly the same set of functions to both RAR systems and I generate the rules, I got the same problem, different number of rules is generated.
    I've verified both RAR configuration and they are the same (excluded users, roles mitigated, etc.)
    Is it a normal behavior? What could be wrong?
    Thanks in advance!!

  • RFC function module always creating BPs with the same user name (RFC user )

    Hi All
    I posted the below question in a different area before. But thought it would be more suitable here.
    Moderators - Please let me know if am doing any mistake.
    Question:
    I have a RFC function module in CRM that creates Business Partners in ECC (XD01 tcode).
    I am using a dialog RFC destination configured in SM59 in CRM.
    But my RFC function module in CRM is always creating the Business Partners in ECC with the RFC user id (the user that we maintain for the RFC destination in SM59).
    This is a problem for the users because they are not able to track the actual person responsible for creating these Business Partners.
    Can somebody please let me know how to solve this problem?
    Thanks
    Raj

    Hi.
    You may use the trust relationship between CRM and R/3 and in SM59 instead of set a specific username, you set the flag "current user".
    With this flag, the system will access R/3 system with the user logged in CRM system. The Trust relationship must be created between CRM and R/3 in order to the system doesn't ask for a password to login in R/3.
    If you need more details please reply.
    Kind regards,
    Susana Messias

  • How to fill an 8x10 page with the same image for making buttons?

    How do you make a button template using the grid?  How do you import the image onto that, and how do you fill an entire page with the same image ie-  1" circles

    I'm trying to do the same thing but I want 1" squares.  I just upgraded from Elements 6 and I did this
    quite often for pendant necklaces.  I used to go and print individual prints, but the previous options are not there.  ;(
    And the picture package is only showing 20 (2x2) as being the smallest size.  I don't see a custom button.
    Can anyone tell me how to do this?  We're doing these for a fundraiser and I can't even print anymore.
    Thanks,
    Kimberly

  • System prefernces im stuck with the same screensaver for eternity!!

    I have had my macbook now for about 3 months and everyhting has been PERFECT!! but just recently i have been haveing truoble changing my screensaver.
    Evreytime i go to change my setting(for the screensaver) my system perfences quits, then i try to reopen it again and it quits again and asks me to report it to apple. i have and i even call them with my apple care but it still does it.( this all started after i change my scrrensaver to ituens artwork) Has anyone seen or heard of anything like this??
    ANY feedback would be awesome. thanks
      Mac OS X (10.4.8)  

    Yep sure have. It seems like when this comes up it usually is associated to using the iTunes screensaver. Try running a Spotlight search for a .plist file that contains both screensaver and iTunes. I don't have one since I've never ran the iTunes screensaver so I can't say specifically what it would be called. But it should be something like com.apple.iTunesscreensaver.plist
    If you find something along those lines Trash that .plist file and try going to your screensaver system preferences again.

  • I have just purchased a macbook air and have the iWorks installed for free. Can I download those iWorks apps to my iPad 3 with the same account for free

    I have an iPad 3 with iOS 6.1.3 and I would like to download the iWork's apps for free. I have just bought a Macbook air and have those apps installed in that computer. i just updated my system to OS X Maverick. I have iCloud connection between both of my devices. Thanks ahead

    Thanks a lot I hoped there was a way like updating my iPad would help or smt but it ***** that they only made it free for some idevices...

  • Newbie :  How can i create 2 users with the same name on diff domain name ?

    I have two domains on my server
    exemple1.com
    exemple2.com
    and i want to create one user for each domain with the same name
    [email protected] and [email protected]
    curently i can create one user, and it's the same user for both domains :-/
    how ?
    thanks
    Hète

    I must say. I am equally curious about this. i've played a lot in Communigate and it is easy to do there but how does one do this in apple mail?

  • Multiple ios products with the same name.

    Hello guys,
    We have multiple iOS universal products with the same name for different countries. Will it cause any issues when the user installs them in the same device? Using Xcode to push them to my device, i noticed that they are all installed in the same place, i.e only one app is available. So my question is how should we do to use the same name for multiple apps and is it possible?

    Go ahead and doubt if it makes you feel superior.
    For others:
    If your pom has this:
    <dependency>
                   <groupId>javax.faces</groupId>
                   <artifactId>jsf-api</artifactId>
                   <version>${jsf.version}</version>
              </dependency>
              <dependency>
                   <groupId>javax.faces</groupId>
                   <artifactId>jsf-impl</artifactId>
                   <version>${jsf.version}</version>
              </dependency>
    where jsf.version = 1.2, change jsf.version to 1.2_10

  • Error U9KP7Q94 when logged in with the deleted user after its recreation...

    Hi All,
    How to get default screen for the deleted user when we recreate the same user with same name?
    i have deleted the user for ex. 'XYZ' (from the catalog user group managemet) and when again i am trying to browse the obiee with the same user i.e. XYZ (after passing the authentication using some LDAP) then i am getting the error like 'Error U9KP7Q94'.
    can anyone help me in this..
    thanks
    Edited by: user10946827 on Apr 26, 2009 4:32 AM

    I don't really see your problem. Do you have any error message ?
    You may have may be a security problem.
    Have you see in the catalog manager if you have the right / grant for the user on the report.
    You can log as administrator / go to the catalog manager / shared folder / catalog root / users /
    - on your user / in the items properties, set the owner ship to the administrator
    - go to the security icon of the directory user
    - give the access to the administrator
    and then you have access to the directory
    To see the grant of each file, you must do the same manipulation (become the owner, change the security, ...)
    Success
    Nico

Maybe you are looking for

  • Flat file connection: The file name "\server\share\path\file.txt" specified in the connection was not valid

    I'm trying to execute a SSIS package via SQL agent with a flat file source - however it fails with Code: 0xC001401E The file name "\server\share\path\file.txt" specified in the connection was not valid. It appears that the problem is with the rights

  • Restoring after archive and install

    after using 'archive and install', what is the proper procedure for restoring applications, plugins, etc? 1. manually copy? 2. migration assistant? 3. reinstall using disks/installers?

  • Place Custom Program on Home Computer

    I have a Java custom program, created by me. I wanted to put this program on my computer. I copy the file and put it in the "C" drive on the folder "program files". I then copy .exe file into the desktop so I can use it as a shortcut. The problem is

  • Access files included in swc? (not classes)

    Hi! I saw it was possible to include files in a swc (for example, images, videos, etc) but I didn't find how access them from an other project. For example I have this folder tree : src   - assets     - images         test.jpg     - videos         te

  • Createing Forms and Reports clusters ?

    Is there any options to creat only Oracle 10g forms and reports services cluster ?