RABAX_STATE error in SOLMAN_SETUP step 6.6

Hi all,
I'm doing the Solman_setup, step "System Preparation" for a new Solution Manager 7.1 sp 14.
As I try to get into the task 6.6 "Connect Diagnostics" the system generates a short dump :
Category               ABAP Programming Error
Runtime Errors         MESSAGE_TYPE_UNKNOWN
ABAP Program           CL_WDR_MESSAGE_MANAGER========CP
Application Component BC-WD-ABA-RUN
Date and Time          20.06.2014 11:26:31
|Short text                                                                                        |
|    Message type "e" is unknown.                                                                  |
|What happened?                                                                                    |
|    Error in the ABAP Application Program                                                         |
|                                                                                                  |
|    The current ABAP program "CL_WDR_MESSAGE_MANAGER========CP" had to be                         |
|     terminated because it has                                                                    |
|    come across a statement that unfortunately cannot be executed.                                |
|What can you do?                                                                                  |
|    Note down which actions and inputs caused the error.                                          |
|                                                                                                  |
|                                                                                                  |
|    To process the problem further, contact you SAP system                                        |
|    administrator.                                                                                |
|                                                                                                  |
|    Using Transaction ST22 for ABAP Dump Analysis, you can look                                   |
|    at and manage termination messages, and you can also                                          |
|    keep them for a long time.                                                                    |
|Error analysis                                                                                    |
|    Only message types A, E, I, W, S, and X are allowed.                                          |
|    There is probably an error in the program                                                     |
|    "CL_WDR_MESSAGE_MANAGER========CP".
All the previous tasks were performed successfully.
It seems to be a program error, but I can't find any Oss Note for it.
Any advise ?
regards

Hi,
Please check the below link
http://www.saptechies.org/system-preparation-short-dump-step-66-connect-diagnostics/
Resyncronize the Solution Manager system with the SLD in the LMDB.
Execute the steps below for the Solution Manager ABAP and JAVA:
Go to the Managed System Configuration
Select the Solution Manager system
Select System Operations -> Maintain System
A new screen will open, select the option Advanced -> Resynchronize the System from SLD, as seen in the example below
Rg,
Karthik

Similar Messages

Error in Solman_setup of Solman 7.1 sp11

Dear All,
I have installed new solman 7.1 and upgrade to sp11.
I have created new client and client copy done by from 000 client.
I started the solman_setup configuration.
While doing system preparation getting error web dispatcher step.
I got struck here from one day onwards.
For your reference i attached screen shots and suggest some solution for this....
Regards
Chandra

Hi,
After doing client copy from 001 and doing solman_setup but same error.
Please give me some solution for this..
I followed sap note 1822831 - Web Service Soap Errors in solman_setup.
But it is not useful for me.
i am able follow that sap note SM_INTERN_WS user is not loging to java system.
"Trying to logon manually with SM_INTERN_WS onto the Solution Manager java stack (eg System Info page) may also help to reproduce the issue, which may in some cases, be due to a misconfiguration of the Java UME."

Debug error: Errors while executing step

Hi gurus:
While debugging a complex mapping, I received the following error.
DEPENDENCY: EXPR executing...
Errors while executing step
DEBUG INPUT ROW: 1
TABLE: DBG$ID2_MTL_SYSTEM_ITEM_B_GR
STATEMENT: TRACE177:TRACE180:
"GE_8_SY"
("DBG$ID2_MTL_SYSTEM_ITEM_B_GR_I$1"):=
""DW_PG".GET_COURSE("MT_1_IN$2"
("DBG$ID2_MTL_SYSTEM_ITEM_B_GR_I$1"), "MT_2_OR$2"
("DBG$ID2_MTL_SYSTEM_ITEM_B_GR_I$1"), 'CATEGORIES', 5)/*ATTRIBUTE EXPR.OUTGRP1.ID2:EXPRESSION*/;
ORA-29280: invalid directory path
ORA-06512: at "SYS.UTL_FILE", line 41
ORA-06512: at "SYS.UTL_FILE", line 478
ORA-06512: at "DW_PKG", line 377
ORA-06512: at "DW_PKG", line 3424
ORA-01403: no data found
As a background, the error occurred at EXPR step which is calling a function. Function calls additional tables in the source schema (tables not brought into Staging) I have imported the Package from the DB (Target) Do I need to do something special for the function to be able to access the tables in the source schema?
Thanks in advance for your help.

I ran into a similar problem about a year ago. Very random, but kept happening at least once a week. Finally figured out that the static IP address for our server was left in the dynamic IP address pool. So every so often, the address was dynamically assigned to a second machine. Which caused a similar type of problem that you are seeing. I don't know if this is your problem. But it sounds familiar.
Hope it helps.
Mike

BPM Collect Pattern: N:1 Mapping error in trnsformation step

Dear All,
I am using collect pattern Payload Dependant.
I have one source data type and one target data type. Mapping is one to one.
Data type contains 3 fields, Value Name and Surname.
In Loop I have used condition when Counter is equal to value stop the loop.
I have used Transformation step as I am using N:1 mapping.
I have used abastrct to abastract message mapping.
Source message is 0 to unbounded.
In interface mapping target message occourance is 1. But in mapping program target message occourance is 0 to unbounded.
When I am running my scenario, Third party to IP is working fine. But in IP i am getting error in transformation step.
"com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Messages/ns0:Message1/ns1:Collect_Receiver_MT. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start"
Can anybody will help me to solve this problem?
Warm Regards,
Gouri

Have a look
http://help.sap.com/saphelp_nw04/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
/people/kannan.kailas/blog/2005/12/07/posting-multiple-idocs-with-acknowledgement
Also have a look at these seminars,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/daea5871-0701-0010-12aa-c3a0c6d54e02
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/e8515171-0701-0010-be98-e37bec4706cc
Thanks

Error in 29 step of SAP Netweaver 4.0 Portal for java on windown7 ultimate.

Dear All,
Im facing problem while installing "SAP Netweaver Portal Server 4.0" for java on my OS "windows7 ultimate" laptop.
Im getting error in 29th step while configuring J2EE engine. Can someone help, i will be highly obliged.
INFO 2010-01-27 18:56:04
Execute step runBatchconfig of component |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|3|0.
INFO 2010-01-27 18:56:11
Removing file C:\Program Files\sapinst_instdir\NW04S\SNEAK_PREVIEW\FULL\INSTALL\batchconfig.properties.
INFO 2010-01-27 18:56:11
Creating file C:\Program Files\sapinst_instdir\NW04S\SNEAK_PREVIEW\FULL\INSTALL\batchconfig.properties.
WARNING 2010-01-27 18:56:11
Error 234 (More data is available.
) in execution of a 'RegEnumValue' function, line (377), with parameter ().
ERROR 2010-01-27 18:56:11
MUT-03001 Value of type HKeyClass has illegal value '0'.
WARNING 2010-01-27 18:56:11
System call failed. Error 1307 (This security ID may not be assigned as the owner of this object.
) in execution of system call 'SetTokenInformation' with parameter (TokenOwner, Administrators), line (855) in file (synxccuren.cpp).
INFO 2010-01-27 18:56:11
Switched to user: j2eadm.
INFO 2010-01-27 18:56:11
Creating file C:\Program Files\sapinst_instdir\NW04S\SNEAK_PREVIEW\FULL\INSTALL\batchXmlGen.log.
WARNING 2010-01-27 18:56:11
System call failed. Error 1307 (This security ID may not be assigned as the owner of this object.
) in execution of system call 'SetTokenInformation' with parameter (TokenOwner, Administrators), line (855) in file (synxccuren.cpp).
INFO 2010-01-27 18:56:11
Switched to user: j2eadm.
INFO 2010-01-27 18:56:11
Working directory changed to C:\Program Files\sapinst_instdir\NW04S\SNEAK_PREVIEW\FULL\INSTALL.
INFO 2010-01-27 18:56:11
Output of C:\j2sdk1.4.2_09\bin\java.exe -classpath "C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sharedlib/launcher.jar" -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.engine.configtool.batch.xmlgenerator.ConfigXmlGenerator "
Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_jce.jar;
Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_jsse.jar;
Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_smime.jar;
Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_ssl.jar;
Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/w3c_http.jar;C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/lib;C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sharedlib;C:\sapdb\programs\runtime\jar\sapdbc.jar" "C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/batchconfig.properties" -short is written to the logfile batchXmlGen.log.
INFO 2010-01-27 18:56:12
Execution of the command "C:\j2sdk1.4.2_09\bin\java.exe -classpath "C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sharedlib/launcher.jar" -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.engine.configtool.batch.xmlgenerator.ConfigXmlGenerator "
Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_jce.jar;
Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_jsse.jar;
Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_smime.jar;
Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_ssl.jar;
Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/w3c_http.jar;C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/lib;C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sharedlib;C:\sapdb\programs\runtime\jar\sapdbc.jar" "C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/batchconfig.properties" -short" finished with return code 0. Output:
Warning : C:\sapdb\programs\runtime\jar\sapdbc.jar file stated but does not exist !
SAP J2EE Engine Batch Config Xml Generator
Batch Config Xml successfully generated to BatchConfig.xml
INFO 2010-01-27 18:56:12
Creating file C:\Program Files\sapinst_instdir\NW04S\SNEAK_PREVIEW\FULL\INSTALL\extractBootstrap.log.
INFO 2010-01-27 18:56:12
Output of C:\j2sdk1.4.2_09\bin\java.exe -classpath "C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sharedlib/launcher.jar" -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.engine.configtool.batch.BatchConfig "
Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_jce.jar;
Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_jsse.jar;
Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_smime.jar;
Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_ssl.jar;
Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/w3c_http.jar;C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/lib;C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sharedlib;C:\sapdb\programs\runtime\jar\sapdbc.jar" "C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/BatchConfig.xml" is written to the logfile extractBootstrap.log.
WARNING 2010-01-27 18:56:14
Execution of the command "C:\j2sdk1.4.2_09\bin\java.exe -classpath "C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sharedlib/launcher.jar" -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.engine.configtool.batch.BatchConfig "
Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_jce.jar;
Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_jsse.jar;
Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_smime.jar;
Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/iaik_ssl.jar;
Akhilesh-PC/sapmnt/J2E/SYS/global/security/lib/tools/w3c_http.jar;C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/lib;C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/install/sharedlib;C:\sapdb\programs\runtime\jar\sapdbc.jar" "C:/Program Files/sapinst_instdir/NW04S/SNEAK_PREVIEW/FULL/INSTALL/BatchConfig.xml"" finished with return code 31415. Output:
PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.path
Error while connecting to DB.
ERROR 2010-01-27 18:56:14
CJS-30059 J2EE Engine configuration error.<br>DIAGNOSIS: Error when configuring J2EE Engine. See output of logfile extractBootstrap.log: '
PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.path
Error while connecting to DB.
ERROR 2010-01-27 18:56:14
FCO-00011 The step runBatchconfig with step key |NW_Java_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|3|0|runBatchconfig was executed with status ERROR .

Dear All, Kindly see the log of extractbootstrap.log ...
PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.path
Error while connecting to DB.
thx waiting for response.
Akhilesh

Error in Block step in BPM.

Hi all,
I am getting the error in block step, my design follows like this i defined one transformation before block step, the transformation step will splits the input bunch of records into equal no of record packets and sent to block step.. while defining block step i used foreach mode, in block step we kept one sync send step which will send message and gets response ....
but my block step is getting error once message enters into the block...
Thanks in advance for your valuable suggestions and solutions...
Srinivas

Hello...
>>the transformation step will splits the input bunch of records into equal no of record packets and sent to block step
The transformation splits the message into bunch.. Put the output in a multiline container and use this in the block step...
>>but my block step is getting error once message enters into the block...
What error are you getting??
>>Thanks in advance for your valuable suggestions and solutions...
Great to know that you are happy with the responses from the community member in this forum.. So I wish to point one more thing here.. Some of the recent threads closed by you were having closing comment as solved.. it will be better if you point out the problem and the solution which you have adopted to solve the same, so that other community member having the same problem will get a speedy solution... This is just a suggetsion from my end...
Thanks
Suraj

Error in transformation step

Hi all,
In my requirement i have a BPM with the following steps
start->Rx->Send<>Tranform>Send->end
first send step is synchronous and it is sending req to a website and receiving response through http receiver channel.
second send step is asynchronous , sending response received from website to a file server through file receiver channel.
i have a transformation step ,where i am doing transformation between the structure in receive step and the structure in second send step,
can i do that?
can we do transformation between any async abstract structures that we define for BPM?
BPM is showing error in transformation step, i dont know whats the error is and how to see the error and rectify the problem
plz help
regards
jhansi

<b>-Check the Transformation Step in BPM, weather it has correct source and target abstract interfaces or not.
- Check the Message Mapping and interface Mapping manually from the Test Tab in IR.
-Check the status of the Error of BPM in SXI_CACHEIntegration ProcessyourBPM. Code should be 0..if something else it is showming means it has an Error.
-Check the Test data you are using to test your interface.
- Check Webservice sending the correct response or it is failing at the time of response..may be because of WS is not running properly or server is down.</b>
Thanks
Farooq.

Capture Error in transformation Step and send it by email without Alerts

Hi all,
I have a problem in my BPM.
I need to capture an error in transformation Step and send it by email with a send step without alerts.
Is there a way to do this in BPM?

Hi Mariano,
Please check the standard pattern in IR under software component SAP BASIS ->Integration process
-->BpmPatternReqRespAlert.Hope this will help you for building the scenario.
In this process we define a deadline branch to monitor the deadline. If the deadline is missed, an alert is triggered and this can be sent to an email too.
Alert Configuration
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
Alert Inbox
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
Alert Notification Step-by-Step
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
Hope this helps.
Best regards,
Sharath
Edited by: sharath Girmaji on Dec 19, 2008 7:17 PM

Error in Fork Step causing issue in generating next work items

All,
We have ECC 6.0 with the following SP:
SAP_BASIS 700 0012 SAPKB70012 SAP Basis Component
SAP_ABA 700 0012 SAPKA70012 Cross-Application Component
I have this strange issue. In one of my custom workflows, i am using a Fork step with 02/ 02 necessary outcomes. In branch 1, i am sending a mail to a user's e-mail id. In branch 2, i have 3 activity steps for another user. Step 1 is to display an invoice and step 2 is a user decision to apprve/deny this invoice.
I know that during runtime, at the Fork step, the work item for branch 1 and the 1st work item for activity step 1 in branch 2 get generated almost simultaneously(though with some small time difference). This is OK. But the issue is, when the sendmail in branch 1 errors out due to some error, and when step 1 is finished successfully by another user, the work item for 2nd activity step in branch 2 is not getting created.
As i understand, in the Fork, the 2 branches, execution should be independent of each other, that means, the work item creation and execution of branch 1 and 3 steps in branch 2 should be happening independently. But, this doesn't seem to be the case.
I understand when the sendmail in branch failed, the wflow is set to 'Error' Status.But there is already an open workitem for step 1 of branch 2. When this workitem is completed successfully, I expect the work item for 2nd step should get generated.But this is not happening. But, when i restart the whole workflow using SWPR, it generates the witem for 2nd step in branch 2. And still the wflow is in 'Error' status.
When the user finishes the 2nd workitem of branch 2, the next work item for 3rd step is not getting generated. Instead i needed to restart the whole wflow again and this time, it generated the 3rd witem in ranch 2.
To my understanding, when a Fork is there, if i specify 02/02 outcomes necessary, these 2 branches should go in parallel, both creation and execution of workitems, until they are joined. And at this point, if the whole Fork step is successful, then workflow will proceed further with steps below the Fork. Shouldn't this be the case ?
Anybody had similar issue? Pl share your thoughts on this. I'd really appreciate if somebody can clarify whats going on in the above case and how to fix this.
Thank you in advance
Regards,
venu
Edited by: Venugopal Jogi on Jun 10, 2009 5:58 PM

Hi Arghadip,
Thanks for your reply. You said
"When a Workflow goes into error the processing should stop whether it is in same branch or in different.".
If this is correct, then as i explained earlier, when i restart the workflow without fixing the errored branch, then also, the next work item should not be created..Right ? But, it is. I didn't fix the errored branch but simply restarted the workflow. Then it created the witem for 2nd step, in the branch 2 that is not errored.
How can this be, the branch 1 is still in ERROR status only. So, can you pl clarify if something else might be going on here.
Also, fixing the issue is fine. But, the SendMail step in branch 1 is just an information only and per business requirement, this should not be holding up the approval process. And if we don't process the invoice in time, just because of some informational mail errored out, this will not be a feasible solution to the client,Right ? That's the whole reason i am using Fork step, so that they both proceed parallelly (independently).
If step 1 is a pre-requisite for step 2, then it makes sense to fix error in step 1 so that we can proceed with step 2.
Any other thoughts on this.....
Regards,
venu

Error in 14th step LSMW

I have done all the steps in LSMW.I can display the converted data in 12th step.but in 13 th step create batch input session I am getting error.In 14 step I have run the process in front end,its go to MM01 screen and ask to type the value.
it not automaticly picking the value.kindly guide me...

Hi,
this error will be coming becasue of mismtch structure fields in Flat file. Check the sequence of data u specified in flat file is according to the fields u specified in LSMW or not?
Ashven

Error in Trasformation step

Hi,
I have a scenario where if the condition satisfied i need to send it to both receiver file and email otherwise if not only to email.
Here i declared the 2 idoc Abstract MI(payment and verfication) and 1 file Abstract receiver. Here only payment need to be send as output. But I am getting error in transformation step as
Expression must return the interface type PAYEXT.PEXR2002.ZEXR2002.
Expression must return the interface type MIPaymentadviceFile
In this scenario please tell me how many transformation need to be used and currently I used only one before switch statement because all the sender need to send the same output.
Regards,
Dhill

Hi Bhavesh,
My actual scenario is
I need to receive 2 IDOC PAYMENT (N TIMES) and VERIFICATION (1 TIMES) so n:1 ration. In this in the payment idoc I have field where I need to find the sum of the field then I need to campare withe the VERIFICATION Idoc with other too field like
if IDCREF01-E1IDRH1-PAYRUNID equals to PEXR2001-E1IDRH1-PAYRUNID and
IDCREF01-E1IDRH1-PAYRUNDT equals to PEXR2001-E1IDRH1-PAYRUNDT and
IDCREF01-E1IDRS1-SUM01 equals to PEXR2001-E1IDKU5-MOABETR.
where MOABETR is the sume field. And if the condition is satisfied then i wl send only PAYMENT IDOC to file and as well as mail otherwise only 2 file.
Please let me know whether it could be possible without BPM and if yes let me know the details and I am sorry i have raised so many forum whether I am getting stucked but till now not able to proceed further.
If you want i will explain the BPM step which involved.
Regards,
senthi.

APP-PAY-06153 SYSTEM ERROR:Procedure at step 1

Hi All,
I select Inventory ,Vision Operations(USA) responsibility---------->Setup----->Oraganisations----->organisations
when i selected that getting the below error.
APP-PAY-06153 System Error:Procedure INIT_FORMS STEP 1
cause: The Procedure INIT_FORMS created an error at STEP 1
ACTION: contact your system administrator quoting the procedure INIT_FORMS and step 1.
any suggesions on this.
Regards,
Nag.

931161 wrote:
I having the same issue in CA Super HRMS Manager Responsibility>Enter and Maintain Form when I have tried to open giving me this error.Do I need to set up under this responsibility ?
profile options HR:Security Profile:What value to select?
and HR:Business Group :What value to select?
HR:User Type ...What value to select?It depends on your setup.
http://www.oracle.com/pls/ebs121/ranked?word=HR:Business+Group&partno=e13477
http://www.oracle.com/pls/ebs121/ranked?word=HR:Business+Group&partno=e13471
Thanks,
Hussein

Sapinstallation error in second step Install common system File.

Hi,
I am installing the SOLMAN on Linux RHEL5 and i am facing the error in second step Install common system File .
sapinst.log ERROR Logs ;
Output of /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh is written to the logfile installsapinit.sh.log.
WARNING 2011-08-15 09:56:21.770
Execution of the command "/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh" finished with return code 3. Output:
/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh: line 48: uname: command not found
ERROR 2011-08-15 09:56:21.774
MUT-03011 Execution of the command "/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh" finished with return code 3. Output:
/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh: line 48: uname: command not found
ERROR 2011-08-15 09:56:21.913
FCO-00011 The step installSAPInit with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_System|ind|ind|ind|ind|system|0|installSAPInit was executed with status ERROR ( Last error reported by the step: Execution of the command "/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh" finished with return code 3. Output:
/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/installsapinit.sh: line 48: uname: command not found).
Can any one please help me on this...

Hello,
the "uname" command is part of the coreutils package on RHEL. Please check if the coreutils package is installed:
rpm -qa | grep -i coreutils
If the coreutils package is not installed you can install it with
yum install coreutils
Regards,
Frank

RABAX_STATE error on CHECKBOX_GROUP

Dear experts,
I've got a few issues with PC 10.0. When I start e.g. "Control Monitoring History with Ratings" I get a RABAX_STATE error:
Error in CHECKBOX_GROUP "REGULATION_CHECKBOX" of view "GRPC_REPORT_SELECTION.SELECTION": Value "0" is not permitted for property colCount
The whole error text is the follwoing:
The followin error text was processed in P02 the systm: Error in CHECKBOX_GROUP "REGULATION_CHECKBOX" of view "GRPC_REPORT_SELECTION.SELECTION": Value "0" is not permitted for property colCount
The error occurred on the application server grc1_P02_02 and in the work process. 5
The termination type was: RABAX_STATE
The ABAP call hierarchy was:
Method: RAISE_FOR of program CX_WDR_ADAPTER_EXCEPTION======CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/CASTANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C7STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C7STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Method: IF_NW7_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/C8STANDARD==============CP
Has anybody of you faced the same problem and have found an answer for that ? If yes, I would aprreciate it if you can give me a hint on that.
Thanks in advance !
Kind regards
Bernhard Lichtinger

Hi Claud,
I just looked up the release to which the note is referring, it doesn't match with mine. So maybe this could be the reason, why the note won't work? Either way, I don't know if it does make sense, changing the the programm code because according to the release it should be built in anyways. But I will look it up, just to be sure.
My procedure to implement the note was like this: I searched for the note within the sap system and started the built-in installation of the sap note with the result, that the error I postet above, was shown.
Kind regards
Bernhard
Edited by: bernhard_L on Jul 31, 2011 1:01 PM

Workflow Error In Foreground Step?

Hi all,
I have developed workflow in which i am using ZCASH BOR object to trigger the WF.
i have used it in WF and Its working fine.but now i want to rename the ZCASH to ZABC.
I have done it but the problem is in foreground step and in the method with Dialog.
I have one task(foreground) in which i am calling that dialog method ZDISPLAY of new BOR ZABC.
When i triggered the WF rest of the background steps are working fine.
the problem is WF goes to error at ZDISPLAY step.It is showing in log that
ZCASH->ZDISPLAY method is not defined.
but there is no ref to old BOR object ZCASH.
I have checked binding also.it fine.
Thanks,
Arpita

Thanks........
I have tried this in test wf its working fine..
Is this because of this is a foreground task?because all other background steps are working fine.
the workflow generates a Wi and whenever agebt tries to execute the WI it throws an error.
Thanks.
Arpita

RABAX_STATE error in SOLMAN_SETUP step 6.6

Similar Messages

Maybe you are looking for