RAC 10.2.0.1 install on AIX 5.3 fails on root.sh
I am getting the following message when running root.sh during CRS 10.2.0.1 install on AIX 5.3 ML04:
./root.sh
WARNING: directory '/oracle/product/10.2.0' is not owned by root
WARNING: directory '/oracle/product' is not owned by root
WARNING: directory '/oracle' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
exec(): 0509-036 Cannot load program /oracle/product/10.2.0/crs/bin/ocrconfig.bin because of the following errors:
0509-150 Dependent module /oracle/product/10.2.0/crs/lib/libttsh10.a(shr_ttsh10.o) could not be loaded.
0509-152 Member shr_ttsh10.o is not found in archive
Failed to upgrade Oracle Cluster Registry configuration
Does anyone have any ideas? Your help is greatly appreciated.
Check the README and Metalink
also does the file actually exist libttsh10
Also check the gen in Inventry/logs to see if it genned OK
Similar Messages
-
Installing oracle 11.2 rac with IBM Storwize V7000 san with aix 6.1
Has and one deployed 11g rac with IBM Storwize V7000 san with aix 6.1
Is this possible using Oracle CRS without going for OS cluster like GPFSHi lbn76,
Has and one deployed 11g rac with IBM Storwize V7000 san with aix 6.1
Is this possible using Oracle CRS without going for OS cluster like GPFS
I hope same thing will work with AIX 6.1 alsoNo problem, the procedure of installation of clusterware is the same in any AIX Platform.
If you are using Clusterware 11.2 you can (should) use ASM Diskgroup to place your clusterware files and database files. If you want use Cluster Filesystem to any other purpose you can use ACFS feature of ASM.
The Storage will be transparent to the ASM, the Luns will be mapped to AIX and ASM (Oracle) will manage the read and write.
The Storage Storwize have several great features, but are transparent to the ASM. The ASM will only see the LUNs provided by AIX.
Regards,
Levi Pereira -
Oracle Linux 6.2 with RAC 11g cluster install fails on root.sh ioctl
I have 2 HP Servers I'm trying to install a cluster to.
I've tried Oracle Linux 6.2 and 6.3 with the same error on both nodes when running the root.sh script.
I have tried the permissions, run-levels, etc that I have found in the forum and nothing has worked except the deconfigure works great. /u01/app/11.2.0/grid/crs/install/rootcrs.pl -deconfig -force
root.sh Errors:
Adding daemon to inittab
CRS-4124: Oracle High Availability Services startup failed.
CRS-4000: Command Start failed, or completed with errors.
ohasd failed to start: Inappropriate ioctl for device
ohasd failed to start at /u01/app/11.2.0/grid/crs/install/rootcrs.pl line 443.
I can't see whats wrong, I did use ASM to configure iSCSI disks from a storage device which appeared to work correctly:
# oracleasm listdisks
VOL1
VOL2
VOL3
VOL5
# ls /dev/oracleasm/disks/
VOL1 VOL2 VOL3 VOL5
When I created the disks with ASM I used multipath successfuly:
# oracleasm createdisk VOL1 /dev/mapper/23535333762373932
The other node can see the disks just fine with oracleasm listdisks
I chose 3 disks for the OCR - VOL1-3
There was one forum work around to edit the $GRID_HOME/crs/install/s_crsconfig_lib.pm which I did no Oracle Linux 6.3 to no avail. I also tried using NFS mounted volumes for the OCR drives but got the same error.
Using the install: linux.x64_11gR2_gridoracleasm (aka asmlib) may not be supported on RHEL(OEL) 6.x. You do NOT need asmlib and it's days are numbered.
upon review of this document, even though it was for 10g, it still appears to be relevant
"10g: Using Openfiler iSCSI with an Oracle RAC database on Linux [ID 371434.1]"
and
udev utility can be used for disk mounting consistency between the nodes. It is the preferred tool. Note:371814.1 explains how to use the udev option.
and
Can't install GI 11gr2 (11.2.0.3) root.sh fail
Edited by: onedbguru on Dec 13, 2012 3:40 PM -
Install RAC failed with root.sh error while loading shared libraries: libst
Hi ,
I install rac under vmware workstation using this atricle .
http://www.oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnCentos4UsingVMware.php
everything work smoothly but I faced error with root.sh
Failed to upgrade Oracle Cluster Registry configuration
I found metlalink talk about missing compat-libstdc++-33-3.2.3-47.3.ia64.rpm and must be installed according to
that .
The probelm rasied when run
/u01/app/oracle/product/10.2.0/crs/bin/crsctl.bin: error while loading shared libraries: libstdc++.so.5: cannot
open shared object file: No such file or directory
Failure initializing entries in /etc/oracle/scls_scr/rac2.
Linux version is RHE4
[oracle@rac1 bin]$ uname -a
Linux rac1.localdomain 2.6.9-55.ELsmp #1 SMP Fri Apr 20 17:03:35 EDT 2007 i686 i686 i386 GNU/Linux
when install this package it does not work
[root@rac1 RPMS]# rpm -Uvh compat-libstdc++-33-3.2.3-47.3.ia64.rpm
warning: compat-libstdc++-33-3.2.3-47.3.ia64.rpm: V3 DSA signature: NOKEY, key ID b38a8516error: Failed
dependencies:
libc.so.6.1()(64bit) is needed by compat-libstdc++-33-3.2.3-47.3.ia64 libc.so.6.1(GLIBC_2.2)(64bit)
is needed by compat-libstdc++-33-3.2.3-47.3.ia64 libc.so.6.1(GLIBC_2.3)(64bit) is needed by compat-
libstdc++-33-3.2.3-47.3.ia64 libgcc_s.so.1()(64bit) is needed by compat-libstdc++-33-3.2.3-47.3.ia64
libgcc_s.so.1(GCC_3.0)(64bit) is needed by compat-libstdc++-33-3.2.3-47.3.ia64 libgcc_s.so.1(GCC_3.3)(64bit)
is needed by compat-libstdc++-33-3.2.3-47.3.ia64 libgcc_s.so.1(GLIBC_2.0)(64bit) is needed by compat-
libstdc++-33-3.2.3-47.3.ia64 libm.so.6.1()(64bit) is needed by compat-libstdc++-33-3.2.3-47.3.ia64
compat-libstdc++ = 7.3-2.96.128 is needed by (installed) compat-libstdc++-devel-7.3-2.96.128.i386 compat-
libstdc++ = 7.3 is needed by (installed) compat-gcc-c++-7.3-2.96.128.i386[root@rac1 RPMS]#
My probelm cannot install this packages ? What shoudl I do .user12010537 wrote:
Hi ,
I found metlalink talk about missing compat-libstdc++-33-3.2.3-47.3.ia64.rpm and must be installed according to
Linux version is RHE4
[root@rac1 RPMS]# rpm -Uvh compat-libstdc++-33-3.2.3-47.3.ia64.rpm
warning: compat-libstdc++-33-3.2.3-47.3.ia64.rpm: V3 DSA signature: NOKEY, key ID b38a8516error: Failed
dependencies:
libc.so.6.1()(64bit) is needed by compat-libstdc++-33-3.2.3-47.3.ia64
My probelm cannot install this packages ? What shoudl I do .
Hi,
You need to install the dependency package first like glibc, etc
also see the output from runcluvfy, it should show which packages need to installed
Cheers -
ETL and DAC clustering for high availaibility in OBIAPPS installed in AIX
Hello Gurus
Could you let me know how to configure teh clustering and failover for Informatica and DAC for obiapps 7963 installed in AIX 6.1 . We have license for HACMP cluster.
Any guide to help me out. I coudn't find it in obiapps deplyment guide.Unlike BI the Informatica and DAC services are based on database. Assuming your database is up and running all the time can you tell me the scenario(s) to bring down these Informatica and DAC services?
If my assumptions are correct you wont have any?
I would suggest to make sure your database is up and running all the time so that Informatica and DAC are up and running.
More over you have to fix manually for any load issues and you wont get benefit from cluster.
Just in case you are going with Cluster then you need to take care of DAC refresh dates.. do you have any plan for the same?
Appreciate if you share about how you end up with this.
If I'm wring correct me, infact I too was waiting for responses for this post :)
Edited by: Srini VEERAVALLI on Dec 26, 2012 9:49 PM -
Can ME be installed on AIX?
Hi,
I am new to ME. The installation guide is suggesting that ME cannot be installed on AIX. We don't have windows or HP or Linux in our environment. Please help me.
Thanks,Hi Sharif,
I doubt anyone tried that, and me neither. So saying just in theory, it may be possible to deploy ME on AIX. But on your on risk, of course. What is the purpose of this? You know, there will be no support from SAP for such installation... You can try it just to play, I think
Anyway, to deploy SAP ME you need an SCA being prepared. It is done by installers which are supported only on mentioned platforms. So you may try to go through supported installation (anywhere on Windows/Linux/HP-UX) until you have the SCA, and try to deploy it. Again, this is all in theory. It may work, but what are you going to do further with that unsupported installation?
Regards
Anton -
RAC installation with 12c database on IBM AIX server 7.1(64bit)
Dear Team,
We have to configure the RAC with oracle 12C database on IBM AIX server 7.1(64bit).
We are new to the RAC setup with 12c installation. So kindly provide the metalink id for proceeding the above installations.
Thanks
KumarHi,
Refer this document also,
RAC and Oracle Clusterware Best Practices and Starter Kit (AIX) (Doc ID 811293.1)
Regards,
krish. -
Grid 11.2.0.2 install on OEL 6.3 fails
Grid Single node (not doing RAC) 11.2.0.2 (latest download available from otn) install fails during ./root.sh execution
Fails with
Creating OCR keys for user 'grid', privgrp 'oinstall'..
Operation successful.
CRS-4664: Node node1 successfully pinned.
Adding daemon to inittab
ohasd failed to start: Inappropriate ioctl for device
ohasd failed to start: Inappropriate ioctl for device at /ocw/grid/crs/install/roothas.pl line 296.
Oracle root script execution aborted!
Perl link is there, there is no privilege issue in the /tmp directories as suggested by MOS ID 1069182.1
Fresh new install of OEL6.3 UEK, preinstall completed no issues, oracleasm config, createdisk...no issues; however
running oracleasm update-driver - says there is no driver for kernel 2.6.39-200.24.1.el6uek.x68_64
I tried the suggestions in one of the threads where a initctl is added to the perl script...that also produced a fail
Any help...?
ron.
Edited by: rmueller on Feb 3, 2013 9:12 PMHi,
have you tried disabling SE-Linux and the firewall. Just to make sure?
Also: With the UEK kernel, the asmlib drivers (kernel dependent part) are already included in the kernel (the reason why updatedriver won't work).
You only need the support and the asmlib rpm.
Regards
Sebastian -
Error message " Device driver software was not successfully installed. Please consult with your device manufacturer for assistance getting this device installed. Digital Still Camera- Failed" HELP!
Hi, I was able to reformat my iPod and that worked. I read it on one of the threads and I am copy pasting the method below:
I opened the "My Computer" window and right-clicked on my ipod, and then selected "Format". I select "Yes" to format since I don't have anything on the nano to delete anymore.
I then Eject my nano from the computer and did a restart while the nano is disconnected from the computer.
Once Windows finish loading I reconnect the USB to the nano(back of computer) which automatically pulls up iTune. It asked me to name the new ipod detected and created a playlist for that specific ipod name.
Pasted from <http://discussions.apple.com/thread.jspa?threadID=1050784&tstart=15>
Thanks! -
my new i-tunes download not installing 'service apple mobile device failed' windows error 126
I have the same problem. I uninstalled the old one because it will not work and now the new one does not either.
Keep getting this picture
Nothing on it works to install itunes and there is no support on the apple site.
Ideas? -
Hi Everyone,
I have a program that sends information(analog output) to lab windows cvi in the form of a text file or user input.
The program runs on the computers that I have the field point explorer and lab windows cvi installed on. In order to run the program without always installing labwindows/cvi and field point; I wanted to create an executable file that could be load on another computer.
I used the create distribution kit part of labwindows/cvi to do this.After creating the distribution kit, I then installed it
to another computer.
My user interface appears on the screen, when the user clicks on the exe. file, but no data is sent to the field point module. I know that the data is being read from the user and textfile because in it appears in the uir.
The following are some details about the problem:
1. On another computer without labwindows/cvi and field point explorer not installed - no data is sent to field point module
I know this because a current is being read on the current meter connected to field point module.
My questions are the following:
1. What are the possible reasons for the data not being sent to the field point module?
2. Do I still need to create an iak. (Installing Field point Explorer) file stored on any new computer that I install my created distribution kit file too?
Thankyou very much for any help that you can provide. I greatly appreciate it.
Faen9901Re: Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901Faen9901,
1) If you do not install FieldPoint Explorer, the FieldPoint Server is not installed so there is nothing on the target computer that knows how to talk to the FieldPoint system.
2) Yes, you need an IAK file on the target computer. Assuming the settings (i.e. com port#) are identical you can simply include the iak file as part of the distribution.
3) You also need to include as part of your installer the file "fplwmgr.dll". If this file is not installed, your program will not be able to access the FieldPoint Server. Alternatively, this file is installed automatically if FieldPoint Explorer detects LabWindows/CVI or Measurement Studio Development versions on the target computer or if you choose to do a custom FieldPoint Explorer installation and
choose to provide LabWindows/CVI support.
Regards,
Aaron -
When Creative Cloud updated a few days ago (Win7) it reported I had no installed apps.
In Lightroom I keep getting messages that a new version is available. Installed it from CC and it installed without error, CC shows I installed it, but it simply fails to run.
How do I get CC to find apps installed under the previous version?
And how do I get Lightroom CC to run?
PeterI still don't know how to get CC to find that I have Photoshop CC installed, but running Creative Cloud, going to Preferences and signing out, then signing in again got Lightroom CC to work.
Since Photoshop CC is still working despite apparently not being installed things are now OK, at least for the moment. But I'm not feeling at all happy with Adobe. -
Anyone out there that knows how to get past this? I´m using Adobe Application Manager and nothing else.
Installed Photoshop and Illustrator without problem, but as I try to install Lightroom 5 it is aborted.I am having the same problem, I am using win vista 64, and everything but LR 5 works,
{{ Third party payload installer Install Lightroom 5 CCM.exe failed with exit code: 1603 }}
any solutions out there?? -
Flashplayer plug upgrade/install 11.6.602.180 failed because Trojan Horse
flashplayer plug upgrade/install 11.6.602.180 failed because Trojan Horse was detected by my antiviral software.
Please can you help?
Prof_STHello Wojislav,
Thank you for your prompt response. Yes, I can do that but don't you think that it would be preferable if the installer/update script didn't evoke this response? None of my other software updates does and while I would like to trust people, these days it gets harder and harder when folks are willing to lie and cheat at the drop of a hat and without compunction. It does not help either that false sites (Adobe mimics) have been installing Trojan Horses so it would be safer all around to remove that foible. It is just not very good. Or at least, it does not look very good, which amounts to the same thing at first glance.
Thanks again for you concern.
Prof_ST
On Mon, 18 Mar 2013 00:06:45 +1000 Wojislav <[email protected]> wrote -
Re: flashplayer plug upgrade/install 11.6.602.180 failed because Trojan Horse
created by Wojislav in Installing Flash Player - View the full discussion Modify antivirus
Script for automatic updates some programs identify as a Trojan horse
you have to put in trusted sources adobe installer
or simply do the following: disable antivirus, install adobe, Switch on antivirus
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5154714#5154714
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5154714#5154714
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5154714#5154714. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Installing Flash Player by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
Purchased a new iMac - installed CS5 CD - message - Installer failed to initialise....
You need to copy all the installer disc to the desktop, Folder by folder. for example, Copy the contents of Payloads folder on Disc 2 to payloads folder of Disc 1, Extension to extensions, etc
Then you will see the setup.app file on the Folder that you created on the desktop.
Run that and check.
Maybe you are looking for
-
I have not been able to sync my mail with iCloud on my MacBookPro (Lion OS). Everything else has been syncing fine for the past two months, but when I go to System Pref/iCloud/and try to check Mail, it asks me to choose an iCloud email address. When
-
Toshiba 39L4333 - TV remote controler - Andorid App - proposal
I'm not sure where to post this proposal, I hope that someone from Toshiba will read this. Please if possible, on remote app for smartphones add information about antenna signal strength, than this app could become nice information feedback tool whil
-
LMS 4.0.1 software distribution 3 out of 7 fail to pass traffic after reload
I've distributed (7) IOS C3560-ipbasek9-mz.150-1.SE2.bin upgrades on identical 3560G PS-S platform using LMS 4.0.1. All jobs come back successfully completed with the /MD5 hash matching exactly what Cisco has on their website. All devices have suffi
-
Not in the correct section ...
Message Edited by ramiral on 04-06-2005 08:23 AM Message Edited by ramiral on 04-06-2005 08:23 AM labview 7.0
-
Portable HD doesn't launch on MAC
Just got another external portable 160GB hard drive from Western Digital-- It doesn't launch on my computer. How can I see the external drive?