RAC 10g rel2: OCFS or ASM ?
Hi all,
I have successfully installed a 10g_r2 RAC on Linux RH3, currently using ASM for all
database files (data, control, redo and flash_reco_area). But I don't like very much ASM,
I would prefer to have direct control on all files, so I am thinking about using OCFS.
Is there any significant performance difference between ASM and OCFS on RHEL3
(Itanium 64 bit) ?
Thanks and bye,
Stefano
Hi
WHat is the storage(shared between two nodes) used in your case .
Similar Messages
-
Solaris 10 Installation for Oracle RAC 10g Rel2
Hello,
I have bought Enterprise 4000 and 250 in order to install and explore Oracle 10g Rel2 RAC.
In this regard I need some guide lines for
1. Installinig Solaris 10
2. Should I use ASM or other other volume manager?
If anybody can give me a starting document, it will be great.
Thanks,
JavedI'm assuming you mean running RAC with or without Sun Cluster? If so, the answer is that there would almost no difference in most cases. The only case I can think of would be if you had a sub-optimal interconnect without Sun Cluster where Sun Cluster's clprivnet would have given you striping and availability for free.
I am currently working on a Blueprint that describes the important differences between the two configurations (with and without SC). They can broadly be summarised as:
Sun Cluster gives you:
* Better data integrity protection
* Faster, more reliable node failure detection
* Makes your name space homogeneous, simplifying installation and device management (DID structure), so no need for messy symbolic links
* Gives you a highly available, striped cluster interconnect for the Cache Fusion traffic. (No need for tricky IPMP or link aggregation configurations.)
* Allows you to use volume managers link Solaris Volume Manager or VxVM
* Provides support for shared QFS as a file system for all Oracle objects, data includes (while still allowing ASM)
* A substantial collection of Sun written and supported agents to manage other applications you might also have on your cluster, e.g. NFS, SAP, Apache, etc, etc.
Hope that helps,
Tim
--- -
Dear All,
I am trying to find out any document regarding Step-By-Step Installation of RAC 10g with OCFS on Windows.
I appreciate if anyone can help on this.
Best regards,
Wessam10g RAC installation guide for Windows is:
http://download-uk.oracle.com/docs/cd/B19306_01/install.102/b14207/toc.htm
And David is right, OCFS is supported on Windows:
http://download-uk.oracle.com/docs/cd/B19306_01/install.102/b14207/crswin.htm#sthref428 -
Oracle 10g R2 installation with ASM+RAC
Gurus,
Need some suggestuon on Oracle 10g R2 installation with ASM and RAC option.
We have found many documents on the Oracle, HP, HP-Oracle CTC and third party web sites, but nothing that is specific to this particular combination of separate
ORACLE_HOMEs, ASM and 10g RAC CRS. It is unclear for me from the documentation how this combination of ASM and 10.2g RAC may best be installed.
The high level steps i got after reading lot of docs as follows - but i am not sure whether these are correct or not. if they are correct, can any one share their experience/notes please?
1) Install CRS
2) Install RDBMS for ASM HOME - create separater oracle home for ASM instance using OUI
3) Install RDBMS for RAC Database Home - create separater oracle home for RAC database using OUI
4) Create ASM database using DBCA -
5) Use dbca to create database.Oracle provides 'paint by numbers' tutorials called 'Oracle By Example'. (Go to OTN, check under the Training tab)
They have one for a Windows based ASM/RAC that you might want to review. Not your specific environment, but the steps will be dag-nabbed close.
I recommend walking the path (http://otn.oracle.com >> training:OBE >> Database 10g Release 1:VMWare:Installation
http://www.oracle.com/technology/obe/obe10gdb_vmware/install/racinstallwin2k/racinstallwin2k.htm -
Hi all,
I have installed Oracle RAC 10g R2 on RHEL 5.5. I followed this document.
http://oracleinstance.blogspot.com/2010/03/oracle-10g-installation-in-linux-5.html
I followed the steps in the document and the installation was successful. I had also created a service called CBE for testing Application Failover (TAF). Finally while i was performing some cluster verifications, the receive the following.
rac1> ./crs_stat -t
Name Type Target State Host
ora....SM1.asm application ONLINE ONLINE ora1
ora....A1.lsnr application ONLINE ONLINE ora1
ora.ora1.gsd application ONLINE UNKNOWN ora1
ora.ora1.ons application ONLINE UNKNOWN ora1
ora.ora1.vip application ONLINE ONLINE ora1
ora....SM2.asm application ONLINE ONLINE ora2
ora....A2.lsnr application ONLINE ONLINE ora2
ora.ora2.gsd application ONLINE UNKNOWN ora2
ora.ora2.ons application ONLINE ONLINE ora2
ora.ora2.vip application ONLINE ONLINE ora2
ora.....CBE.cs application ONLINE ONLINE ora1
ora....db1.srv application ONLINE ONLINE ora1
ora.oradb.db application ONLINE ONLINE ora1
ora....b1.inst application ONLINE ONLINE ora1
ora....b2.inst application ONLINE ONLINE ora2
Some of the services are not up and running. Can someone help me in this.
Thanks in Advance :)
Edited by: user13405005 on Aug 29, 2011 11:12 PM
Edited by: user13405005 on Aug 29, 2011 11:40 PMHi,
don't worry about GSD. GSD is only used if you also run 9i databases in the cluster. Even though it should state as OFFLINE (not as unknown), I would not care about that.
However ONS should not be in the status UNKNOWN.
Can you do the following:
srvctl start nodeapps -n
To restart the ONS and see if it stays.
Also post the output on onsctl debug
(All from CRS Home).
Regards
Sebastian -
Oracle RAC 10g R2 in Windows Installation error
Hi!
Can anyone help me with this one?
I have trying to installa RAC 10g R2 in Windows Server 2008 R2. I am encountering the error below:
OUI-35073: Exception occured while starting service in the remote nodes. Could not start the service 'OracleClusterVolumeService' in the remote cluster
nodes. The specified service does not exist as an installed service
Thanks..Pl indicate which version of 10gR2 - only 10.2.0.5 is supported on Win 2008 R2
http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b15680/toc.htm#BABEBBJF
Pl also post in the RAC forums - RAC, ASM & Clusterware Installation
Srini -
Failover not happening the Oracle RAC 10g
Hi All,
I am new to RAC.
I have installed Oracle RAC 10g on Redhat Linux 4.0. Till yesterday failover was happening that is when i stopped one instance on node01 the vip of node01 was transferred to node02.This was shown using ifconfig -a but now that is now happening.Don't know as what has happened.Can you please help me out
Below information is given:
[oracle@node01 ~]$ crs_stat -t
Name Type Target State Host
ora.hitesh.db application ONLINE ONLINE node02
ora....h1.inst application ONLINE ONLINE node01
ora....h2.inst application OFFLINE OFFLINE
ora....SM1.asm application ONLINE ONLINE node01
ora....01.lsnr application ONLINE ONLINE node01
ora.node01.gsd application ONLINE ONLINE node01
ora.node01.ons application ONLINE ONLINE node01
ora.node01.vip application ONLINE ONLINE node01
ora....SM2.asm application ONLINE ONLINE node02
ora....02.lsnr application ONLINE ONLINE node02
ora.node02.gsd application ONLINE ONLINE node02
ora.node02.ons application ONLINE ONLINE node02
ora.node02.vip application ONLINE ONLINE node02
Listner status on node01 is given:
[oracle@node01 ~]$ lsnrctl status
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 06-APR-2013 12:59:29
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER_NODE01
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 06-APR-2013 11:59:03
Uptime 0 days 1 hr. 0 min. 25 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /home/oracle/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /home/oracle/oracle/product/10.2.0/db_1/network/log/listener_node01.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.131)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM1", status BLOCKED, has 1 handler(s) for this service...
Service "+ASM_XPT" has 1 instance(s).
Instance "+ASM1", status BLOCKED, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "hitesh" has 2 instance(s).
Instance "hitesh1", status READY, has 2 handler(s) for this service...
Instance "hitesh2", status READY, has 1 handler(s) for this service...
Service "hiteshXDB" has 2 instance(s).
Instance "hitesh1", status READY, has 1 handler(s) for this service...
Instance "hitesh2", status READY, has 1 handler(s) for this service...
Service "hitesh_XPT" has 2 instance(s).
Instance "hitesh1", status READY, has 2 handler(s) for this service...
Instance "hitesh2", status READY, has 1 handler(s) for this service...
The command completed successfully
[root@node01 oracle]# crsctl check crs
CSS appears healthy
CRS appears healthy
EVM appears healthy
[root@node01 oracle]# ps -ef | grep lmon
oracle 5741 1 0 12:07 ? 00:00:03 ora_lmon_hitesh1
root 22582 20805 0 13:01 pts/2 00:00:00 grep lmon
oracle 23643 1 0 11:58 ? 00:00:01 asm_lmon_+ASM1
Please let me know what information else is required
Edited by: user12924280 on Apr 6, 2013 12:36 AMSince you didn't say "thank you", I assumed my time was of no value to you.
However, I shall try again.
There is no relationship between instance failure and VIP failover. How can there be? What if you are running ten instances on each node, and one fails? Would you want the VIP to relocate? And I've already told you how to test it: kill the node. Just reboot it. -
Solaris x86 with Oracle RAC 10g Enterprise Edition Release 10.2.0.3.0
Hello,
Maybe you can help me (new on RMAN backup) in doing this.
I have configured a single Oracle 10g database to have backup with RMAN with following steps:
1. $ mkdir $ORACLE_BASE/rman_scripts
2. $ mkdir $ORACLE_BASE/logs
3. $ mkdir $ORACLE_BASE/tracking
4. $ mkdir $ORACLE_BASE/c_backup
5. $ sqlplus sys/<password> as sysdba
6. SQL> alter system set db_recovery_file_dest_size = 50G scope=both;
7. SQL> alter system set db_recovery_file_dest='${ ORACLE_BASE}/flash_recovery_ area' scope=both;
8. SQL> alter system set log_archive_dest_10='location= use_db_recovery_file_dest';
9. SQL> shutdown immediate
10. SQL> startup nomount
11. SQL> alter database archivelog;
12. SQL> alter database open;
13. SQL> alter database enable block change tracking using file '${ORACLE_BASE}/tracking/rman_ change_track.f';
14. $ rman target /
15. RMAN> CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK
TO '/var/opt/oracle/flash_ recovery_area/ORCL/c_backup/% F';
16. RMAN> CONFIGURE CONTROLFILE AUTOBACKUP ON;
17. RMAN> CONFIGURE BACKUP OPTIMIZATION ON;
18. RMAN> CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
19. RMAN> exit
I need to configure incremental backup with RMAN on a two node Solaris x86 with Oracle RAC 10g Enterprise Edition Release 10.2.0.3.0 installation.
We also use ASM to store database files, and have Oracle software installed on separate file systems (two Oracle roots for Node1 and Node2).
I have following questions:
1) where to put Flash Recovery Area (FRA)?
I saw recommendations to put FRA on the ASM, is this the best way to do it?
2) Can I put FRA on another file system (not on the ASM) which is available only from Node1? This way I can save space on the ASM.
3) Is it possible/recommended to run RMAN from Node1 only?
Below is the script used to run RMAN on the normal Oracle database (without RAC) which I need to change :
=============================================================================================
2.0 Oracle backup script: /opt/app/oracle/rman_scripts/backup.sh
Use this for daily backups, possiblly as a cron job.
Once a week run this: /opt/app/oracle/rman_scripts/backup.sh FULL
All other days of the week: /opt/app/oracle/rman_scripts/backup.sh INCREMENTAL
Note: You may have to change ORACLE_SID, ORACLE_BASE below to match your database.
=============================================================================================
#!/usr/bin/ksh
ORACLE_SID=orcl
ORACLE_BASE=/opt/app/oracle
ORACLE_HOME=${ORACLE_BASE}/product/10.2.0/db_1
PATH=${ORACLE_HOME}/bin:/usr/bin
LOGDIR=${ORACLE_BASE}/logs
LOGFILE=${LOGDIR}/rman.log
if [[ $# < 1 ]]
then
echo "usage: backup.sh FULL|INCREMENTAL"
exit;
fi
BACKUPTYPE=${1}
full='FULL'
incremental='INCREMENTAL'
if [[ $BACKUPTYPE == $full ]]
then
$ORACLE_HOME/bin/rman target / nocatalog log ${LOGFILE} append << eof
run {
backup database;
SQL 'alter system archive log current';
backup archivelog all;
delete noprompt obsolete;
exit;
eof
echo ''
fi
if [[ $BACKUPTYPE == $incremental ]]
then
$ORACLE_HOME/bin/rman target / nocatalog log ${LOGFILE} append << eof
run {
backup database;
backup incremental level 1 database;
SQL 'alter system archive log current';
backup archivelog all;
delete noprompt obsolete;
exit;
eof
echo ''
fiHi [email protected],
Q1) where to put Flash Recovery Area (FRA)?
A1) With RAC: on the shared storage
I saw recommendations to put FRA on the ASM, is this the best way to do it?
If you want your backups to be available for both nodes you have to use shared storage or tape using an mml library.
So if you want to use the FRA for rman backups and the database is on ASM just make ASM the standard for the FRA as well.
Q2) Can I put FRA on another file system (not on the ASM) which is available only from Node1? This way I can save space on the ASM.
A2) Than you cannot recover in case Node1 is down. Best would be to send your storage admin to a training course so he can manage the clustered raw devices needed for ASM.
Q3) Is it possible/recommended to run RMAN from Node1 only?
A3) No see A2.
Regards,
Tycho -
Problem of using OCFS2 as shared storage to install RAC 10g on VMware
Hi, all
I am installing a RAC 10g cluster with two linux nodes on VMware. I created a shared 5G disk for the two nodes as shared storage partition. By using OCFS2 tools, i formatted this shared storage partition and successfully auto mounted it on both nodes.
Before installing, i use the command "runcluvfy.sh stage -pre crsinst -n node1,node2" to determine the installation prerequisites. Everything is ok except an error "Could not find a suitable set of interfaces for VIPs.". By searching the web, i found this error could be safely ignored.
The OCFS2 works well on both nodes, i formatted the shared partition as ocfs2 file system and configure o2bc to auto start ocfs service. I mounted the shared disk on both nodes at /ocfs directory. By adding an entry into both nodes' /etc/fstab, this partition can be auto mounted at system boots. I could access files in shared partition on both nodes.
My problem is that, when installing clusterware, at the stage "Specify Oracle Cluster Registry", I enter "/ocfs/OCRFILE" for Specify OCR Location and "/ocfs/OCRFILE_Mirror" for Specify OCR Mirror Location. But got an error as following:
----- Error Message ----
The location /ocfs/OCRFILE, entered for the Oracle Cluster Registry(OCR) is not shared across all the nodes in the cluster. Specify a shared raw partition or cluster file system that is visible by the same name on all nodes of the cluster.
------ Error Message ---
I don't know why the OUI can't recognize /ocfs as shared partition. On both nodes, using command "mounted.ocfs2 -f", i can get the result:
Device FS Nodes
/dev/sdb1 ocfs2 node1, node2
What's the possible wrong? Any help is appreciated!
Addition information:
1) uname -r
2.6.9-42.0.0.0.1.EL
2) Permission of shared partition
$ls -ld /ocfs/
drwxrwxr-x 6 oracle dba 4096 Aug 3 18:22 /ocfs/Hello
I am not sure how far this following solution is relevant to your problem (regardless when it was originally posted - may help someone who is reading this thread), here is what I faced and here is how I fixed it:
I was setting up RAC using VMWare. I prepared rac1 [installed OS, configured disks, users, etc] and the made a copy of it as rac2. So far so good. When, as per the guide I was following for RAC configuration, I started OCFS2 configuration, faced the following error on RAC2 when I tried to mount the /dev/adb1:
===================================================
[Root @ *rac2* ~] # mount - t ocfs2 - o datavolume, nointr / dev / sdb1 / ocfs
ocfs2_hb_ctl: OCFS2 DIRECTORY corrupted WHILE reading uuid ocfs2_hb_ctl: OCFS2 DIRECTORY corrupted WHILE reading uuid
mount.ocfs2: Error WHEN attempting TO run / sbin / ocfs2_hb_ctl: "Operation not permitted" mount.ocfs2: Error WHEN attempting TO run / sbin / ocfs2_hb_ctl: "Operation not permitted"
===================================================
After a lot of "googling around", I finally bumped into a page, the kind person who posted the solution said [in my words below and more detailed ]:
o shutdown both rac1 and rac2
o in VMWare, "edit virtual machine settings" for rac1
o remove the disk [make sure you drop the correct one]
o recreate it and select *"allocate all disk space now"* [with same name and in the same directory where it was before]
o start rac1 and login as *"root"* and *"fdisk /dev/sdb"* [or whichever is/was your disk where you r installing ocfs2]
Once done, repeat the steps for configuring OCFS2. I was successfully able to mount the disk on both machines.
All this problem was apparently caused by not choosing "allocate all disk space now" option while creating the disk to be used for OCFS2.
If you still have any questions or problem, email me at [email protected] and I'll try to get back to you at my earliest.
Good luck!
Muhammad Amer
[email protected] -
RAC 10g on Linux VMs problems with smp
I'm following Vincent Chan's article "Install Oracle RAC 10g on Oracle Enterprise Linux Using VMware Server" in order to get up to speed on Oracle RAC on Linux. I've had good success so far but it appears that when the kernel was created it was created as smp even though I only had processor count set to 1. I went on to choose the oracleasm-2.6.9-42.0.0.1EL driver for UP kernel not realizing I had an smp kernel. Now that I'm trying to create ASM disks I get the following message:
Writing Oracle ASM library driver configuration: [ OK ]
Loading module "oracleasm": Unable to load module "oracleasm"
[FAILED]
I'm assuming this problem is due to the wrong asm driver being installed.
So my question is, since I truly have a single processor virtual machine, should I try to rebuild the kernel as UP? Or should I try to re-install the smp version of oracleasm and keep the kernal as smp with 1 processor?
Additional info:
# rpm -qa | grep asm
ibmasm-3.0-7
oracleasm-support-2.0.3-2
oracleasmlib-2.0.2-1
oracleasm-2.6.9-42.0.0.0.1.EL-2.0.3-2
# uname -r
2.6.9-42.0.0.0.1.ELsmpHi Frits,
I had the same problem but could not find the right rpm.
Can you give the URL?
My problem:
[root@rac2 ~]# /etc/init.d/oracleasm configure
Configuring the Oracle ASM library driver.
This will configure the on-boot properties of the Oracle ASM library
driver. The following questions will determine whether the driver is
loaded on boot and what permissions it will have. The current values
will be shown in brackets ('[]'). Hitting <ENTER> without typing an
answer will keep that current value. Ctrl-C will abort.
Default user to own the driver interface []: oracle
Default group to own the driver interface []: dba
Start Oracle ASM library driver on boot (y/n) [n]: y
Fix permissions of Oracle ASM disks on boot (y/n) [y]: y
Writing Oracle ASM library driver configuration: [ OK ]
Loading module "oracleasm": Unable to load module "oracleasm"
[FAILED]
[root@rac2 cmshare]# uname -r
2.6.9-42.0.0.0.1.ELsmp
[root@rac2 cmshare]# rpm -qa | grep oracleasm
oracleasmlib-2.0.2-1
oracleasm-support-2.0.3-2
oracleasm-2.6.9-42.0.0.0.1.EL-2.0.3-2
Regards,
Chungmen -
Hi All
I am installing Oracle RAC 10g 10.2.0.1 on HP-UX B.11.31 U ia64 but can not complete
hosts file
#Public IPs
10.144.1.111 spgdb01
10.144.1.112 spgdb02
#Private IPs
10.144.2.2 spgdb01p
10.144.2.3 spgdb02p
#Virtual IPs
10.144.1.113 spgdb01v
10.144.1.114 spgdb02v
I do installation with runInstaller without error. It copy and link is ok. When I run root.sh then It cannot complete as following
Checking to see if Oracle CRS stack is already configured
Checking to see if any 9i GSD is up
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/oracle/product/10.2.0' is not owned by root
WARNING: directory '/oracle/product' is not owned by root
WARNING: directory '/oracle' is not owned by root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 0: spgdb01 spgdb01p spgdb01
node 1: spgdb02 spgdb02p spgdb02
Creating OCR keys for user 'root', privgrp 'sys'..
Operation successful.
Now formatting voting device: /ora/crs/votedisk01
waitpid(-1, 0x7fffdf50, WUNTRACED) .................................................................................................... [sleeping]
Now formatting voting device: /oracle/oradata1/crs/votedisk02
Now formatting voting device: /oracle/oradata2/crs/votedisk03
Format of 3 voting devices complete.
Startup will be queued to init within 30 seconds.
====================
I have waited for 10 mins but still not complete
Additionally, log from runInstaller, I got
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2011-04-28_12-13-31AM. Please wait ...-bash-4.2$ Oracle Universal Installer, Version 10.2.0.1.0 Production
Copyright (C) 1999, 2005, Oracle. All rights reserved.
Private Interconnect : null
Private Interconnect : null
Private Interconnect : null
Private Interconnect : null
So, please help me fix this issue
Thank youI had this problem and resolved it by transporting the file to the installation server with the correct ftp datatype (binary).
On page 54 of the install guide (..Server\Oracle_Business_Intelligence\doc\doc\bi.1013\b31765.pdf) that comes with the installation files, there is an instruction to make sure that any ftp activity is done in binary.
This may not have occured with the license.xml file if you use a tool which offers the "feature" of automatic datatype recognition.
Hope this helps. -
Error when adding a new node to RAC 10g
Hi all,
I have a RAC 10g environment test in Linux Red Hat Umbreakble 5 with two nodes. This RAC is fine on 2 nodes.
I want to add a new node (rac3) of the following way:
- The node 1 (rac1) is started and the instance ORCL1 is online.
- The node 2 (rac2) is offline. i.e the machine is off.
- The node 3 (rac3). The machine is on and already configured
So that when I execute the CRS_home\oui\bin\addnode.bat on node 1 and put the information of node 3 (Public node name, Private node name, Virtual host name) and press next I get the following message:
OUI-35000: Fatal cluster error encountered (PRKC-1071 Nodes rac2 did not respond to ping in 30 seconds) - Sure: The machine is off;
My question is: Can´t I add a new node on RAC if a node is off ?
Anybody can help me.
Thanks.
(Wander Brazil)Interesting question.
You might have better luck getting an answer if you ask where people discuss RAC, instead of asking where people report documentation issues. (Go to http://forums.oracle.com and scroll down to 'Grid Computing' to see RAC forums.) -
Oracle 10g rel2 Forms on windows Vista (Patches7047034 and Opatch 6880880).
Hello All,
I have been trying to apply patch 7047034 by using Opatch Universal Installer (Opatch 6880880). But I have not been able to do this. The main reason of applying this patch is to enable my forms 10.1.2.0.2 to be upgraded to 10.1.2.3., so that it can run on windows vista with Internet explorer 7.
At the momment it does not run the forms it just show a grey page after trying to run the Test.fmx form.
If I try to run any other form it comes up with an ORA-12560 :TNS: Protocol Adapter Error.
When I click on the ok button, it comes up with the login page. When I try to re-login without entring the connect identifier it comes up with thesame error message ORA-12560 :TNS: Protocol Adapter Error.
But when i try relogin using a connect identifier it comes up with ORA-12154: TNS: Could not resolve connect identifier specified. Then a grey page is all i see on the screen. I found that a bit strange since am already logged on, on forms 10g. Why is is it still asking me for further credentials.
Having read several literature from the forum i thought the patch was what i needed. And this is what i did to apply the patch.
After setting environment variable ORACLE_HOME
C:\DevSuiteHome_1>set ORACLE_HOME=c:\oracle\product\10.2.0\db_1
C:\DevSuiteHome_1>cd opatch
C:\DevSuiteHome_1\OPatch>set ACTIVE_STATE__PERL=TRUE
C:\DevSuiteHome_1\OPatch>opatch apply c:\DevSuiteHome_1\OPatch\p7047034_10105_WI
NNT
"OPatch could not detect Perl. Please set PERL5LIB appropriately and invoke Perl
"OPatch is certified with Perl Version 5.6.1."
"Invoke OPatch manually using the following command format:"
" <path to Perl>/perl <path to OPatch>/opatch.pl <patch command> [options]"
"You can use the following command format to view help information:"
" <path to Perl>/perl <path to OPatch>/opatch.pl [<patch command>] -help"
OPatch returns with error code = 0
I also noticed that the PERL directory has version 5.8.3 instead of the 5.6.1
I had gone on the perl website to download perl 5.6.1, but i found the following
Latest stable version of ActivePerl 5.6: 5.6.1 build 638
Gzipped tarball (Unix)
Zip file (Windows)
Patch against Perl 5.6.1 sources
I do not know which one to download. Is it the zip file for windows or the Patch against perl 5.6.1
Please does anybody have any idea what i need to do.
Thanks in advance
Cheers
AjHello Hsawwan,
Thanks for your reply. It is not part of Oracle E-Business. But this is Oracle Forms Application server release 10.1.2.0.2, and oracle Database 10g. rel2, installed seperatelly. I can connect ok to the database from forms 10g. But when it comes to running the forms, the browser comes up and i can see the java sign on the browser, after that it prompts me for username, password and connect identifier. As mentioned earlier, when i supply 2 criteria ie, the username scott, and password tiger I get ORA-12560: TNS: Protocol Adapter error. However, when i supply all 3 questions, ie username, password and connect identifier- ORCL, I get error message
ORA- 12154: TNS: Could not resolve the connect identifier specified.
Also i need to download Perl 5.6.1, does any body knows where i can download this?
Because the I currently have perl 5.8.3 and opatch is pointing to perl 5.6.1.
The site i found has error cannot display page.
Also where is the application env file located, and what should i be setting in this file.
Sorry for the long explanation. I hope I am making some sense.
Thanks in advance
Cheers
Aj -
Class oracle/jpub/runtime/dbws/DbwsProxy does not exists on 10g Rel2
I trying using UTL_DBWS with samle from url http://www.freelists.org/archives/oracle-l/03-2005/msg00670.html in 10g Rel2 but I take error: class oracle/jpub/runtime/dbws/DbwsProxy does not exists .What I do incorrect?
However, using web service in Oracle rdms very hard...May be exists simply example for dummies?Not really for dummies, but it may be a good way to get started:
Oracle Database Programming Using Java and Web Services, by Kuassi Mensah.
You have also the following resouces on OTN: Database Web Services.
-- Eric -
Oracle RAC 10g on Windows XP Professional
Hi All,
I read many articlaes that we can not install Oracle 10g RAC on Windows xp professional but the problem is I have a laptop where I am installing VMWARE with Unix O/S I can not upgrade my XP to Server edition as I do not have money o buy license.
Please help me what all files I need to change to make my XP one of the nodes os RAC 10g.Thanks for replying.
Can by downloading the kit,I will be able to install Oracle RAC?
My question was:
I have windows xp on my machine.I have vmware software also.I need to install Oracle RAC 10g on winxp and an guest opertaing system which will be linux.I want to test RAC by making 1 node on linux and one node on guest operating system winxp.
Problem is RAC can only be installed on Server edition.Can it be possible to do it on WinXP?
Maybe you are looking for
-
Installation errors with Oracle 10g Express Edition client.
Hi, I want to use the Oracle 10g XE client on my Ubuntu (Lucid) laptop. I am following the installation instructions as mentioned at Installing Database Oracle XE Client. When I run the .sh file for my bash shell, I keep getting this error message: r
-
Multiple calls of same pricing routine while saving sale order
Hi, I have a requirement where I have to modify a pricing routine 9XX for sale order. In pricing procedure, I observed that this routine 9XX is assigned to multiple pricing conditions (ZNN, ZMM, ZDD etc). I saw that this routine is getting called man
-
Transfer a message of high dimension from client to client
What i must use to di it? Ftp? SocketChannel? Thanks.
-
I don't know my backup password
Hello everybody , I made a backup for my Iphone on the itunes in my Windows 8 laptop . When i wanted to restore it to my iphone it asked me to enter a password for the backup but i don't know it. I don't remember that i put a password for my backup.
-
ENHANCEMENT: parse condition queries in builder
The conditions box on item attributes does not seem to parse the condition statement when saving; unlike the region source or process source. It would be helpful if the conditions box parsed the statements of type plsql expression, function body, sql