RAc 11gR2 to RAC Cloning

Hello,
Could you provide me the exact steps to do a RAC 11gR2 to RAC cloning as a part of a clusterware + RAC database rebuild from scratch?
Thank you

Hi there,
allow a little addition, please: the links point to the latest version of the documentation (thanks, Levi), which assumes 11.2.0.2.
I would recommend using 11.2.0.2, but if the customer insisits on 11.2.0.1, then be aware that the configuration wizard used in the documentation did not exist in 11.2.0.1. You will need a different sequence of step in this case. The easiest and best would therefore be to use 11.2.0.2 - the information was not given in the original request, hence I thought I would add this information here.
Hope it helps. Thanks,
Markus

Similar Messages

  • Steps to do the R12 on 11.2.0.2 RAC to Non-Rac cloning on Win2008 64bit

    Please brief the steps to do the R12 on 11.2.0.2 RAC to Non-Rac cloning on Windows 2008 64-bit.
    There is a metalink document but that says it for linux environment but not windows. Please brief the steps if someone has done it on windows.

    ora-appsdba wrote:
    Please brief the steps to do the R12 on 11.2.0.2 RAC to Non-Rac cloning on Windows 2008 64-bit.
    There is a metalink document but that says it for linux environment but not windows. Please brief the steps if someone has done it on windows.
    The steps should be the same for Windows (with minor changes, like you may need to create Oracle service before duplicating the database).
    Cloning Oracle Applications Release 12 with Rapid Clone [ID 406982.1]
    Rapid Clone Documentation Resources For Release 11i and 12 [ID 799735.1]
    Cloning Oracle E-Business Suite Release 12 RAC-Enabled Systems with Rapid Clone [ID 559518.1]
    Certified RAC Scenarios for E-Business Suite Cloning [ID 783188.1]
    Thanks,
    Hussein

  • RAC to NON-RAC Cloning in R 12 using Rapid Clone

    Hi,
    We are using EBS 12.0.4 with DB version Oracle Database 10g Enterprise Edition Release 10.2.0.4.0.
    Initilally the RAC to non RAC cloning were not supported using rapid clone for this.But from Oct 19 Oracle has certified the same.
    Can anybody specify me the document which contain the step by step process for RAC to NON-RAC Cloning using Rapid Clone.I cant find this.
    Regards,
    Susmit

    Hi;
    Please check below previos thread:
    Cloning RAC to non RAC
    RAC -> NON RAC ebiz clone
    Re: Clone Oracle Apps 11.5.10.2 RacDB to Non-RAC DB
    Regard
    Helios

  • R12 shared application file system with Rac cloning help

    Hello,
    We have R12 with two application servers(Shared File system) and two db servers(on RAC). The same setup we have on test as well. We are using linux servers. Can anyone help me with cloning steps? Shared file system to Shared file system and RAC to RAC cloning. I am waiting for your replies.
    Thanks
    Mehmood

    Hi,
    Please refer to:
    Note: 783188.1 - Certified RAC Scenarios for E-Business Suite Cloning
    Note: 559518.1 - Cloning Oracle E-Business Suite Release 12 RAC-Enabled Systems with Rapid Clone
    Note: 799735.1 - Rapid Clone Documentation Resources, Release 11i and 12
    Note: 756050.1 - Troubleshooting Autoconfig issues with Oracle Applications RAC Databases
    Thanks,
    Hussein

  • Oracle Apps RAC TO RAC cloning from Netbackup(tape)

    Hi,
    I am doing RAC to RAC cloning on linux 5 following is the note id i follow
    Cloning Oracle E-Business Suite Release 12 RAC-Enabled Systems with Rapid Clone [ID 559518.1]
    In this note step 4.2 we use adclone.pl to prepare the stage on source using "Method=Rman", i think this creates image backup of the database on source system
    In step 5.1.4.1 we restore the database on target using the stage backup we took in source.
    So, here i was thinking if it is possible to use Netbackup server (tapes) for "rmanstage=" parameter. Because we don't have that much disk space to accommodate backup and as with Rman duplicate database we directly connect to tape with auxiliary for cloning, Please let me know if we can use this process with the above adclone.pl
    Thanks,
    Tanveer Mohammed

    Hi Tanveer,
    Yes what you want is allowed, you are free to clone your DB using rman outside of the cloning utilities.
    When you want this make sure you follow:
    Cloning Oracle E-Business Suite Release 12 RAC-Enabled Systems with Rapid Clone [ID 559518.1] >> Section 8: Advanced Cloning Scenarios >> 8.1 Cloning the Database Separately
    Regards,
    Ronald Rademaker

  • R12.1.1 Rac to non Rac Cloning

    Can anybody provide information on Rac to non Rac cloning. I have metalink notes but i need clear steps for Rac cloning to non Rac.
    Thanks

    Hi,
    You just need to follow the steps in the Rapid Clone doc -- Please refer to these docs for details.
    Certified RAC Scenarios for E-Business Suite Cloning [ID 783188.1]
    Rapid Clone Documentation Resources, Release 11i and 12 [ID 799735.1]
    Thanks,
    Hussein

  • EBS 12.1.3 RAC to RAC Cloning

    BismillahirRehmanirRahim
    Dear All,
    I need to Clone our Production EBS Environment from RAC to RAC with Shared APPL_TOP and Multi Tier Appl Tiers.
    We have EBS 12.1.3 Environment with 2 Appl Tier Nodes with Shared Appl_Top & EBS DB is on 11gR2 RAC 11..2.0.4.
    I am following Doc IDs 406982.1 & 559518.1.
    But its not clear which directories need to be copy and restore for Shared Appl top on each Node.
    Also what Steps will need to be executed on Each Nodes and
    What Steps need to be executed only on one Node.
    Appreciate your feedback.
    P.S.
    Kindly share if anyone have Step by Step Doc for RAC to RAC EBS Cloning.

    Jay
    Edit /u01/startapps.sh  and stopapps.sh
    Add VIS to the environment lines " . /u01/E-BIZ/apps/apps_st/appl/APPS*.env"
    Change to => ". /u01/E-BIZ/apps/apps_st/appl/APPSVIS*.env"
    I had the same problem found the solution here...refer to the Fix Environment File section of the following
    http://ltd.kentw.co.uk/technical/r12-installation/create-apps-vm/
    A little late, I hope it helps someone in the future..
    Ben

  • EBS 12.1.3 RAC to RAC Cloning with Shared Appl_Top

    BismillahirRehmanirRahim
    Dear All,
    I need to Clone our Production EBS Environment from RAC to RAC with Shared APPL_TOP and Multi Tier Appl Tiers.
    We have EBS 12.1.3 Environment with 2 Appl Tier Nodes with Shared Appl_Top & EBS DB is on 11gR2 RAC 11..2.0.4.
    I am following Doc IDs 406982.1 & 559518.1.
    But its not clear which directories need to be copy and restore for Shared Appl top on each Node.
    Also what Steps will need to be executed on Each Nodes and
    What Steps need to be executed only on one Node.
    Appreciate your feedback.
    P.S.
    Kindly share if anyone have Step by Step Doc for RAC to RAC EBS Cloning.

    Hi Hussein,
    thanks for the reply.
    +The path is different (first path is db while the second one is apps), so copy the file from the source instance to $COMMON_TOP/clone/context/apps directory on the target instance and try then -- Troubleshooting RapidClone issues with Oracle Applications R12 [ID 603104.1]+
    What I meant to say that CTXORIG.xml already exists in the correct directory in the target system:
    $COMMON_TOP/clone/context/apps
    Anyways, I recopied the file from source to the target system $COMMON_TOP/clone/context/apps, but still the same problem. I'll continue reading "Troubleshooting RapidClone issues with Oracle Applications R12 [ID 603104.1]".
    I noticed below when running "perl adcfgclone.pl appsTier" with perl debug mode:
    Cwd::_backtick_pwd(<10.1.3 ORACLE_HOME>/perl/lib/5.8.3/aix-thread-multi/Cwd.pm:204):
    204: local @ENV{qw(PATH IFS CDPATH ENV BASH_ENV)};
    DB<1> s
    Cwd::_backtick_pwd(<10.1.3 ORACLE_HOME>/perl/lib/5.8.3/aix-thread-multi/Cwd.pm:205):
    205: my $cwd = `$pwd_cmd`;
    DB<1> s
    pwd: No such file or directory
    Cwd::_backtick_pwd(<10.1.3 ORACLE_HOME>/perl/lib/5.8.3/aix-thread-multi/Cwd.pm:207):
    207: local $/ = "\n";
    DB<1> s
    BR,
    TH

  • RAC Cloning using hot backup

    Hi,
    can somebody help me with the steps for cloning 2 node to 2 node RAC, using hot backup.
    Thx.

    Actually, the procedure to clone a RAC database do not differ substantially from those of a single-instance database.
    You can perform your cloning as if it is a single instance database and once you have your single instance up, you just have to add another instance - and the high level steps would be:
    1) Preparing the init.ora file for the second instance.
    2) Adding the redo logs for thread 2;
    3) Updating the OCR
    HTH
    Thanks
    -Chandra Pabba

  • Rac cloning

    hello,
    os: rhel
    db: 10.2.0.2
    cloning from rac to rac using RMAN.
    so at the time of cloning it will create onlineredo logs ?
    after that we should open database in resetlogs?
    and any extra activities has to be done after cloning.
    can answer these posts please
    Thanks in advance.
    Edited by: user5420 on Jun 11, 2010 8:35 AM

    I agree with Fahd Mirza that it is very easy to clone to a single instance using the RMAN duplicate database command, and then convert that clone to a RAC cluster. You need to modify a copy of the init.ora file for your cluster, then duplicate the database. Bring up the database as a stand alone to make certain it is functioning. Then take it down and add in the entires to the init.ora to make it a cluster database. Bring the database online using the RAC-enabled pfile, create your spfile from the pfile, then shutdown and startup as a RAC cluster.
    Final test is to use the RAC tools like srvctl to stop and start your database and nodeapps, etc. Then you are done.

  • RAC cloning using VMWare

    hello,
    Just curious if anyone has looked into cloning their RAC enviornment running on VMWare?
    so create a vmware RAC template and then use it to create other RAC enviornments.
    What would be some of the issues involved given the multiple layers?
    Thank You.

    First, I would never EVER use VMware for a RAC environment. RAC = High Availability. Splitting a single host into multiple "little" systems, then using RAC is IMProfessionO down right idiotic. Because as soon as the "host" system crashes, you no longer have HA. The only thing that I would "maybe" consider it for a test or even dev environment but never for production.
    That being said, have you looked at the documentation?
    http://www.oracle.com/technetwork/products/clustering/oracle-rac-in-oracle-vm-environment-131948.pdf

  • RAC Cloning failing with ORA-12505: TNS:listener does not currently know of SID given in connect

    Hi Folks
      Application cloning is failing with "ORA-12505: TNS:listener does not currently know of SID given in connect"
    Database cloning is completed successfuly .   database cloned in two nodes node1 and node2
    Now cloning applicatino tier with above cloned database nodes but faicing above issue .
    Thanks

    There are many reasons why an ORA-12505 might be raised at applications cloning. For anyone on this board to assist, you will have to post the log file detail or list the clone execution file which raises this exception.
    Thanks,
    Arif.

  • RAC TO RAC CLONING ERROR IN EBS R12

    Hi ,
    Hussain i need your support in this issue i am facing the same error ...
    At the third stage of RMAN restore ...

    1011023 wrote:
    Hi ,
    Hussain i need your support in this issue i am facing the same error ...
    At the third stage of RMAN restore ...
    Please post the details of the application release, database version and OS.
    What are you trying to achieve here?
    What is the command you are running?
    What is the error you are getting?
    Please provide more details.
    Thanks,
    Hussein

  • Db context file creation for rac to single instance cloning

    DOC ID: 559518.1 Section 6: RAC to Single Instance Cloning mentions that the context file creation should be done as in the case of Single Instance cloning
    what would be the command syntax?

    Thanks Hussein. However, section 6 of doc 559518.1 mentions that part 5.1.3 when cloning from rac to single node should be done as in the case of Single Instance cloning.
    the syntax for rac to rac cloning (which is in 5.1.3) is
    perl adclonectx.pl \
    contextfile=[PATH to OLD Source RAC contextfile.xml] \
    template=[NEW ORACLE_HOME]/appsutil/template/adxdbctx.tmp \
    pairsfile=[NEW ORACLE_HOME]/appsutil/clone/pairsfile.txt \
    initialnode
    so what is the syntax for rac to single instance? I reckon I will still use adclonectx.pl, but now what would be the complete sysntax for single instance cloning?

  • R12 cloning from RAC to NON RAC

    Is there any document available either on metalink or on any other site regarding the cloning of R12 APPS and DB Tiers. as I have R12 EBS on RAC DB with OCFS2. Ichecked on metalink they said that they are not supporting for this cloning.
    Thanks,
    imran

    Welcome to the forums !
    RAC to non-RAC cloning is supported under certain conditions - pl see MOS Doc 783188.1 (Certified RAC Scenarios for E-Business Suite Cloning). Which scenario does your install fit into ?
    HTH
    Srini

Maybe you are looking for

  • Dreamweaver no longer asks to copy image to root folder

    Dreamweaver CS3 on Mac - whenever I copied an image from my "Pictures" folder into a HTML page, it always used to remind me to copy it into my "images" folder within the site and for some reason it no longer does that.  Does anyone know why and how I

  • Install Developer 6i on ORACLE 8.1.7 client

    Saw that a lot of you have problems with Developer 6i and ORACLE 8.1.7 server. I have installed 8.1.7 client only on my computer (this version is mandatory, for corporate standard); when I try to install Developer 6i, I get the error message: The loc

  • Can I use my iTunes Store account with more than one PC ?

    Hi all, Am I able to use my iTunes Store account with more than one PC ? I use my account on my PC - but I would like to download the latest version of iTunes onto my Mum's laptop, log in to my own iTunes Store account and rent a movie for her to dow

  • LSMW-Direct Method

    Hi, Can any body send LSMW step by step process for direct method to this ID [email protected] Thanks in Advance regards, SaravanaKumar Edited by: saravana kumar on Mar 6, 2008 8:15 AM

  • Display problems on macbook pro

    I send my macbook pro to a authorized service in Brazil, because my macbook just do not display images anymore, so today they emailed me the price for repairing, about US$1000, gosh what a ****..... help me.