RAC - Cluvfy - TCP connectivity check failed for subnet

Hi ...this is Oracle RAC 10.2.0.4.0 .. has anyone witnessed this check failure or is able to comment on how I should debug the same
./runcluvfy.sh stage -post hwos -n all -verbose
Check: TCP connectivity of subnet "172.30.182.0"
Source Destination Connected?
sekiazu0230:172.30.182.67 sekiazu0231:172.30.182.68 failed
sekiazu0230:172.30.182.67 sekiazu0231:172.30.182.68 failed
Result: TCP connectivity check failed for subnet "172.30.182.0"
Interface information for node "sekiazu0230"
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
en0 172.30.182.67 172.30.182.0 172.30.182.67 172.30.182.1 1E:40:3D:1C:96:02 1500
en0 172.30.182.67 172.30.182.0 172.30.182.67 172.30.182.1 1E:40:3D:1C:96:02 1500 ===> Duplicated ?
en1 172.30.190.48 172.30.190.0 172.30.190.48 172.30.182.1 1E:40:3D:1C:96:03 1500
en2 10.252.34.9 10.252.34.0 10.252.34.9 172.30.182.1 1E:40:3D:1C:96:04 65390
Thank you for all feedback
Steve

Hello Buddy,
Please note that inode2:127.0.0.1 is using loopback IP, please check your network configuration and retry the cluvfy operation.
Cheers,
Rodrigo Mufalani
www.mufalani.com.br/blog

Similar Messages

  • TCP connectivity check failed for subnet

    hi
    im trying to add a node to my 11.2 grid infrastructure and the cluster verification is returning error
    Check: TCP connectivity of subnet "152.15.123.0"
    Source Destination Connected?
    inode2:127.0.0.1 inode2:152.15.123.4 failed
    Result: TCP connectivity check failed for subnet "152.15.123.0"
    this happens when i run cluvfy with pre nodeadd option, there is no other failure ...
    any idea what it could be ?

    Hello Buddy,
    Please note that inode2:127.0.0.1 is using loopback IP, please check your network configuration and retry the cluvfy operation.
    Cheers,
    Rodrigo Mufalani
    www.mufalani.com.br/blog

  • CLUVFY failing with 'User Equivalence check failed for...'

    New 2 node RAC configuration. Oracle 10gR2, Linux RHEL 5 x64. I'm at the post hardware config, pre install clusterware stage.
    Running the cluster verification utility command:
    cluvfy comp sys -n node-01,node-02 -p crs -verboseReturns the following error:
    Verifying system requirement
    ERROR:
    User equivalence unavailable on all the nodes.
    Verification cannot proceed.
    Verification of system requirement was unsuccessful on all the nodes.I've verified the following:
    1) RSA keys correctly configured on both nodes and I can ssh between without a password
    2) ping ip and private work correctly to and from both nodes.
    3) user, group ids are identical on both systems.
    I also ran cluvfy stage -post hwos -n node-01,node-02 -verbose and received the following output. This output is from node-01. node-02's is identical, except with equivalence to itself failing.
    Checking node reachability...
    Check: Node reachability from node "node-01"
      Destination Node                      Reachable?
      node-02                       yes
      node-01                       yes
    Result: Node reachability check passed from node "node-01".
    Checking user equivalence...
    Check: User equivalence for user "oracle"
      Node Name                             Comment
      node-02                       passed
      node-01                       failed
    Result: User equivalence check failed for user "oracle".
    WARNING:
    User equivalence is not set for nodes:
            node-01
    Verification will proceed with nodes:
            node-02
    Checking node connectivity...I get the same behavior on both nodes. Not quite sure what else to check. Any thoughts or suggestions? Thanks.

    No, no banners. And I followed note 300548.1 to the letter. Several times :-)
    However, I believe my issue has to do with a CVUHOME/cv/admin/cvu_config.
    According to the documentation:
    CV_XCHK_FOR_SSH_ENABLED—If set to TRUE, it enables the X-Windows check for verifying user equivalence with ssh. By default, this entry is commented out and X-Windows check is disabledIt was not, unfortunately, disabled by default - once I set it to false, everything succeeded. I still need to figure out why XCHK itself is failing, but I think I can troll through the log to figure that out.

  • User equivalence check failed for user "oracle" while running cluvfy

    Hi All,
    I am getting User equivalence error as follows while executing cluvfy. I want to install CRS on this server.
    oracle@node200$ ./runcluvfy.sh stage -pre crsinst -n node200,node201,node202
    Performing pre-checks for cluster services setup
    Checking node reachability...
    Node reachability check passed from node "node200".
    Checking user equivalence...
    User equivalence check failed for user "oracle".
    Check failed on nodes:
    node202,node201,node200
    ERROR:
    User equivalence unavailable on all the nodes.
    Verification cannot proceed.
    Pre-check for cluster services setup was unsuccessful on all the nodes.
    I have sucessfully configured ssh and able to do ssh from all the nodes without prompting for the password. Also oracle uid and gid on all the servers are same.
    I also checked in .kshrc file and there is no tty entry in that file. and I have also setup /etc/hosts.equiv file on all the node.
    I still get the user equivalance error. Can anybody help me in this ?
    Regards,
    Raj.

    Hi,
    thanks.
    i need some more help because first time i am working on RAC,
    i am also having User equivalence check failed for user "oracle"
    i got two machines, one is IBM machine and one is DELL machine installed with solais 10 (AIX installation). both machines are not connected by private network now. and no shared external HDD available now. it will take one week time to set up the HW. the user equivalence check depends the above two factors?
    now public network is available and node reachability test "passed"
    could you please tell me what may be the reason for the user equivalence check in my case. details are given below
    i have oracle user in both machine. user creation done through SMC. home directory is /export/home/oracle
    the following are the details.
    1) $ ssh pc000905 id -a oracle
    Enter passphrase for key '/home/oracle/.ssh/id_rsa':
    uid=100(oracle) gid=300(oinstall) groups=301(dba)
    $ ssh pc026376 id -a oracle
    Enter passphrase for key '/home/oracle/.ssh/id_rsa':
    uid=100(oracle) gid=300(oinstall) groups=301(dba)
    2) user nobody exists.
    3) all files n .ssh directory have same permissions.
    4) ssh and scp is working with out password(rsa and dsa keys generated).
    5) oracle user is using bourne shell
    6)soft link of /usr/bin/ssh and /usr/bin/scp are created to /export/home/oracle/bin
    7)ForwardX11 is "yes" in sshd_config
    8) created a config file in .ssh directory and ForwardX11 is "no" in that file
    8) umask =022 in both nodes.
    error displaying is
    $/export/gome/cluvfy/runcluvfy.sh stage -pre crsinst -n pc026376,pc000905
    Performing pre-checks for cluster services setup
    Checking node reachability...
    Node reachability check passed from node "PC026376".
    Checking user equivalence...
    User equivalence check failed for user "oracle".
    Check failed on nodes:
    pc026376,pc000905
    ERROR:
    User equivalence unavailable on all the nodes.
    Verification cannot proceed.
    Pre-check for cluster services setup was unsuccessful on all the nodes.
    $

  • AIX SSH Connectivity,  existence check failed for bin/bash

    hello;
    I received error
    AIX 7 Oracle RAC 11g R2
    Oracle RAC AIX SSH Connectivity
    existence check failed for bin/bash on node2
    but the bin/bash exists
    have any idea?
    regards
    siyavus
    Edited by: sak on May 31, 2011 10:41 PM

    Does it really say "bin/bash"? It should have a slash in front of bin: "/bin/bash"
    Can you login to node 2 and do:
    echo $PATH
    ls -l /bin/bash

  • Oracle 11g RAC on Red Hat EL 4 x86_64 check failed for glibc-2.3.4-2.19

    Hi , I had a Red Hat EL 4 linux with FULL installion, so all the packages are installed auto.
    when I check the glibc with RPM, I got :
    rpm -q --queryformat "%{NAME}-%{VERSION}.%{RELEASE}.%{ARCH}\n" glibc
    glibc-2.3.4.2.41.i686
    glibc-2.3.4.2.41.x86_64
    It looks the 32 bit and 64 bit glibc are all installed.
    but when I run cluvfy to check RAC installion , I got :
    Check: Package existence for "glibc-2.3.4-2.19"
    Node Name Status Comment
    wcmrac2 missing failed
    wcmrac1 missing failed
    Result: Package existence check failed for "glibc-2.3.4-2.19". -----32 bit check failed ??
    Check: Package existence for "glibc-2.3.4-2.19"
    Node Name Status Comment
    wcmrac2 glibc-2.3.4-2.41 passed
    wcmrac1 glibc-2.3.4-2.41 passed
    Result: Package existence check passed for "glibc-2.3.4-2.19".----64 bit check passed ??
    why does this ?

    Did you check the compatibility of Oracle Database 11g with RedHat 4 in the compatibility matrix or the installation docs?

  • Result: User equivalence check failed for user "oracle".

    While installing on Solaris-10, ssh, rlogin, scp works fine.
    Running runcluvfy.sh stage -post hwos -n rac-1,rac-2 -verbose returns the above error.
    Result: User equivalence check failed for user "oracle".
    ERROR:
    User equivalence unavailable on all the nodes.
    Verification cannot proceed.
    /bin/ssh & /bin/scp is in use.

    Hello,
    I am facing User equivalence check failed for user "oracle" error on my newly to be built RAC cluster.
    The Oracle users have been created identically and ssh have been setup as per RAC installation manual.
    Still I am facing the below problem. Please help me out
    Node1 > uname -a
    Linux purple-rac-node2 2.6.18-194.el5 #1 SMP Mon Mar 29 22:10:29 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
    Node2 > uname -a
    Linux purple-rac-node1 2.6.18-194.el5 #1 SMP Mon Mar 29 22:10:29 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
    clusterware/cluvfy/runcluvfy.sh stage -post hwos -n purple-rac-node1,purple-rac-node2 -verbose
    Performing post-checks for hardware and operating system setup
    Checking node reachability...
    Check: Node reachability from node "purple-rac-node1"
      Destination Node                      Reachable?
      purple-rac-node2                         yes
      purple-rac-node1                         yes
    Result: Node reachability check passed from node "purple-rac-node1".
    Checking user equivalence...
    Check: User equivalence for user "oracle"
      Node Name                             Comment
      purple-rac-node2                         failed
      purple-rac-node1                         failed
    Result: User equivalence check failed for user "oracle".
    ERROR:
    User equivalence unavailable on all the nodes.
    Verification cannot proceed.
    [oracle@purple-rac-node1 ~]$ id oracle
    uid=501(oracle) gid=501(dba) groups=501(dba),502(oper),503(oinstall)
    [oracle@purple-rac-node2 ~]$ id oracle
    uid=501(oracle) gid=501(dba) groups=501(dba),502(oper),503(oinstall)

  • RUNCLUVFY  Result: PRVF-4007 : User equivalence check failed for user "orac

    hello
    try to run runcluvfy.sh I receive the following screen rac2 is passed but rac 1 is failed can sombody help me?
    thanks
    [oracle@rac1 grid]$ ./runcluvfy.sh stage -pre crsinst -n rac1,rac2 -verbose
    Performing pre-checks for cluster services setup
    Checking node reachability...
    Check: Node reachability from node "rac1"
    Destination Node Reachable?
    rac2 yes
    rac1 yes
    Result: Node reachability check passed from node "rac1"
    Checking user equivalence...
    Check: User equivalence for user "oracle"
    Node Name Comment
    rac2 passed
    rac1 failed
    Result: PRVF-4007 : User equivalence check failed for user "oracle"
    WARNING:
    User equivalence is not set for nodes:
    rac1
    Verification will proceed with nodes:
    rac2
    Checking node connectivity...

    Check this older thread which has a lot of information on this:
    User equivalence check failed (RAC setup)

  • PRVF-4007 : User equivalence check failed for user "grid"

    Oracle Version 11.2.0.3.0 patched to 11.2.0.3.1
    I had installed GIU and RAC db on 2 node cluster
    but since yesterdy has this issue when running the commands
    [grid@vmorarac2 ~]$ cluvfy comp ocr -n all -verbose
    Verifying OCR integrity
    ERROR:
    PRVF-4008 : User equivalence unavailable on all the specified nodes
    Verification cannot proceed
    vmorarac1 and vmorarac2 r the two nodes
    as a grid user, from vmorarac1 i ran ssh vmorarac2 and it failed with above error and vice versa
    so i did the following
    from vmorarac1
    ssh vmorarac2
    yes and enter key
    exec /usr/bin/ssh-agent $SHELL
    /usr/bin/ssh-add
    i did the same on other node
    but the problem still exists.
    Edited by: 912919 on 23-May-2012 06:58

    Hi,
    The subject of thread "*PRVF-4007 : User equivalence check failed for user "grid*"
    Now..
    {code}
    PRVF-4657 : Name resolution setup check for "vmorarac-scan.pbi.global.pvt" (IP address: 152.144.199.201) failed
    PRVF-4664 : Found inconsistent name resolution entries for SCAN name "vmorarac-scan.pbi.global.pvt"
    PRVF-4664 : Found inconsistent name resolution entries for SCAN name "vmorarac-scan.pbi.global.pvt"
    {code}
    If you can see are different issue.
    If you are using DSN to resolve hostname "vmorarac-scan.pbi.global.pvt" check with "nslookup" if the name is resolved correctly.
    If you are using Hosts File to resolve hostname "vmorarac-scan.pbi.global.pvt" you must configure only one ip (152.144.199.201) to resolve "vmorarac-scan.pbi.global.pvt" this entrie must be on host file of all nodes of cluster.
    Levi Pereira

  • User equivalence check failed for user "oracle".

    Hi,
    I am trying to install the Oracle Clusterware 10g as part of my RAC setup.
    I have configured RHEL 4 in 2 nodes (rac and rac2). But when I run the runcluvfy utility, I get the below error:
    [oracle@rac cluvfy]$ ./runcluvfy.sh stage -pre crsinst -n rac,rac2
    Performing pre-checks for cluster services setup
    Checking node reachability...
    Node reachability check passed from node "rac".
    Checking user equivalence...
    User equivalence check failed for user "oracle".
    Check failed on nodes:
    rac
    WARNING:
    User equivalence is not set for nodes:
    rac
    Verification will proceed with nodes:
    rac2
    The problem is only with the first node(rac). The second node passes succesfully.
    ssh works fine. Not sure what is wrong!
    Thanks!

    Did you do Configure SSH for User Equivalence ?
    Or
    Did you Establish User Equivalence ?
    If yes.. please check...
    $ ssh rac hostname
    rac
    $ ssh rac2 hostname
    rac2
    You should Establish User Equivalence before...
    exec /usr/bin/ssh-agent $SHELL
    /usr/bin/ssh-add
    If You don't configure ssh for user equivalence
    http://www.oracle.com/technology/pub/articles/smiley_rac10g_install.html
    Or
    read SSH User equivalence is not set up on the remote nodes

  • Connection verification failed for data source on port 1433

    Trying to set up a DSN for a SQL Server database on a new computer and it's failing every time.
    Connection verification failed for data source: csf
    java.sql.SQLNonTransientConnectionException: [Macromedia][SQLServer JDBC Driver]Error establishing socket to host and port: SANDYPC:1433. Reason: Connection refused: connect
    The root cause was that: java.sql.SQLNonTransientConnectionException: [Macromedia][SQLServer JDBC Driver]Error establishing socket to host and port: SANDYPC:1433. Reason: Connection refused: connect
    Now, when I installed CF 11, it installed on port 8500.  However, when I try changing the port in the setup to 8500, I get this error:
    Connection verification failed for data source: csf
    java.sql.SQLException: Timed out trying to establish connection
    The root cause was that: java.sql.SQLException: Timed out trying to establish connection
    I cannot find anything online on how to fix this!  HELP!!! 

    Hi,
    Is that SQL Express edition? If so perhaps TCP protocol is not enabled. Is Windows firewall turned on? Check port 1433 is open.
    Normally you would not create a datasource to apache port 8500, that is a web server not database server port.
    HTH, Carl.

  • Result: PRVF-4007 : User equivalence check failed for user "oracle"

    Hi
    I get below error everytime I run ./cluvfy stage -pre crsinst -n node01,node02 -fixup -verbose > a.log
    Checking user equivalence...
    Check: User equivalence for user "oracle"
    Node Name Comment
    node02 passed
    node01 failed
    Result: PRVF-4007 : User equivalence check failed for user "oracle"
    WARNING:
    User equivalence is not set for nodes:
    node01
    Verification will proceed with nodes:
    node02
    node01 is the local node, if I run from node02 It comes back saying the same thing about node2!
    I have checked oracle uid and groups all set correctly and ssh working fine ...
    I have ran the same command for grid user and getting the same error !!

    i know what it was, i should have done ssh localnode date for once at least!!
    I only did ssh remotenode date :)

  • LMS3.1 psu problem - Consistency check failed for base package

    Hi all,
    I tried to install the following packges for CiscoView 6.1.9:
    Rtr2900.cv50.v2-0.zip
    Rtr3900.cv50.v2-0.zip
    but it gives me the following error:
    Consistency check failed for base package NGMARShare
    There are no Packages to be installed.
    I uninstalled all packages and installed them again after I copied these two packages in the packages sources folder but it failed again.
    Any one can help?
    Thanks

    the new package you try to install depends on a package that you don't have
    DEPENDENT PACKAGE
    =================
    DtShare V1.5 (DtShare.cv50.v1-5.zip)
    this can be seen from the error message you got
    "Consistency check failed for base package DtShare"
    my advice is to read the "Release Information" for the packages you try to install
    you can find the Release Information in the same page of the download.
    hope this helps,
    also it's better to update all the device packages if your server have internet connectivity from CS > Software Center > device update.

  • Post install checks failed for DBC file - Oracle App11.5.10.2 Linux  5.3

    Hi everybody,
    I tried Installing Oracle E-Business Suite 11.5.10.2 on Red Hat Enterprise Linux Server release 5.3
    The Post install checks failed for DBC file, HTTP, JSP and PHP. Apparently the DBC hadn’t been created. I had verified the log file, while executing adgendbc.sh, it throwing below error.
    Generating /jith/d01/oracle/appl/visappl/fnd/11.5.0/secure/prithvi.bangalore.bedford.local_vis.dbc
    DBC generation failed with exit code 127
    Generating /jith/d01/oracle/appl/visappl/fnd/11.5.0/secure/prithvi_vis.dbc
    DBC generation failed with exit code 127
    Updating Server Security Authentication
    Updating Server Security Authentication failed with exit code 127
    adgendbc.sh exiting with status 127
    ERRORCODE = 127 ERRORCODE_END
    .end std out.
    touch: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
    sqlplus: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
    mkdir: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    sed: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    /jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
    cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    /jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
    cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    /jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
    cp: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    /jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
    /jith/d01/oracle/appl/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
    .end err out.
    Thanks in advance.
    sreejith

    Welcome to the forums !
    Pl post EBS related question in the EBS forums at http://forums.oracle.com/forums/category.jspa?categoryID=3
    HTH
    Srini

  • RME 4.3.1 device update failing 'WARNING : Cat3560(7.3):Consistency check failed for base package SharedNetshowIOS'

    Hi Guys,
    I'm having some issues updating the device packages for my RME 4.3.1 install.
    I've downloaded and tried to update the 'Cat3560.zip' package via the GUI, but the job fails with the above error.
    I pulled up the PSU.log and found the following:
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : isExistsVersionFile=true
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : _CURCMVER=5.2.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : CMF Package Map Available.
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : CMVERSION=5.2.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : MDFVERSION=1.41
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : isExistsVersionFile=true
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty]  : VERSION=4.3
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty]  : PATCHVER=1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : _CURRMEVER=4.3.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty]  : Mdf=1.41:MDF Package
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : RMEVERSION=4.3.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : MDFVERSION=1.41
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : isExistsVersionFile=true
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : _CURCMVER=5.2.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : CMF Package Map Available.
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : CMVERSION=5.2.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>]  : MDFVERSION=1.41
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [PackageManager : initAdapters]  : Adapter for CM already loaded.
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [PackageManager : initAdapters]  : Adapter for CVW already loaded.
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [DFMPSUAdapter : <clinit>]  : isExistsVersionFile=true
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [DFMPSUAdapter : <clinit>]  : _CURDFMVER=3.2.0
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [DFMPSUAdapter : <clinit>]  : CMF Package Map Available.
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [DFMPSUAdapter : <clinit>]  : DFMVERSION=3.2.0
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [DFMPSUAdapter : <clinit>]  : MDFVERSION=1.41
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : isExistsVersionFile=true
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty]  : VERSION=4.3
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty]  : PATCHVER=1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : _CURRMEVER=4.3.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty]  : Mdf=1.41:MDF Package
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : RMEVERSION=4.3.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : MDFVERSION=1.41
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [PackageManager : initAdapters]  : Adapter for RME already loaded.
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [PackageManager : initAdapters]  : Adapter for CVW already loaded.
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : isExistsVersionFile=true
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty]  : VERSION=4.3
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty]  : PATCHVER=1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : _CURRMEVER=4.3.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty]  : Mdf=1.41:MDF Package
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : RMEVERSION=4.3.1
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>]  : MDFVERSION=1.41
    [ Thu May 27 10:11:49 PDT 2010 ] INFO   [PackageManager : initAdapters]  : Adapter for RME already loaded.
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PackageManager : installPackages]  : Locking package repository..
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PackageInstaller : installStep_resolve]  : Checking Dependencies...
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : pickUnselectedBasePackages]  : SharedSwim2900XL has 17 dependent packages
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[ImageParserAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Lower version of dependent package[SharedDcmaIOS] installed
    [ Thu May 27 10:11:50 PDT 2010 ] ERROR  [PsuPkgResolver : pickUnselectedBasePackages]  : Consistency check failed for base package SharedDcmaIOS
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[DistributionAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Lower version of dependent package[LibSwim] installed
    [ Thu May 27 10:11:50 PDT 2010 ] ERROR  [PsuPkgResolver : pickUnselectedBasePackages]  : Consistency check failed for base package LibSwim
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[SwimJobOptionsAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[ImageAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[SoftwareAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[ConfigAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Lower version of dependent package[LibCommon] installed
    [ Thu May 27 10:11:50 PDT 2010 ] ERROR  [PsuPkgResolver : pickUnselectedBasePackages]  : Consistency check failed for base package LibCommon
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[SystemAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[ImageListAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[ContainmentAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[FlashAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[MemoryAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[RemoteStageAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Dependent package[SwimCCOAG] already installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent]  : Lower version of dependent package[SharedSwimIOS] installed
    [ Thu May 27 10:11:50 PDT 2010 ] ERROR  [PsuPkgResolver : pickUnselectedBasePackages]  : Consistency check failed for base package SharedSwimIOS
    [ Thu May 27 10:11:50 PDT 2010 ] WARN   [PsuPkgResolver : pickLatest]  : No packages to pick ..Empty package set passed .
    [ Thu May 27 10:11:50 PDT 2010 ] ERROR  [PsuPkgResolver : populateResolverResult]  : All selected packages failed consistency check..
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [SimpleProgress : progressInfo]  : Progress: WARNING: SharedSwim2900XL(2.2.3): Consistency check failed for base package SharedDcmaIOS
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PackageInstaller : installStep_resolve]  : Packages selected for install (satisfies consistency check) : []
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [SimpleProgress : progressInfo]  : Progress: No packages to be installed
    [ Thu May 27 10:11:50 PDT 2010 ] INFO   [PackageManager : installPackages]  : Creating maps in D:\CSCOpx\www\classpath\com\cisco\nm\xms\psu\pkgs\rme
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.11.2.3.7.5.19 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6010 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6020 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6030 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7101 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.8110 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6040 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7102 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7201 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6050 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7103 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7301 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6060 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7203 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7401 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7501 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7303 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7213 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6070 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7502 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7223 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7503 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7504 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : * not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:12:31 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.9.1.99999999 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6010 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6020 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6030 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7101 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.8110 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6040 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7102 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7201 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6050 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7103 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7301 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6060 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7203 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7401 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7501 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7303 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7213 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.6070 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7502 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7223 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7503 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps]  : oid : 1.3.6.1.4.1.141.1.1.7504 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
    [ Thu May 27 10:13:44 PDT 2010 ] INFO   [PackageManager : installPackages]  : Releasing lock...
    [ Thu May 27 10:13:44 PDT 2010 ] INFO   [DeviceSupportHistory : init]  : Loading history db fromD:\CSCOpx\lib\classpath\com\cisco\nm\xms\psu\conf\historyDB
    [ Thu May 27 10:13:44 PDT 2010 ] INFO   [DeviceSupportHistory : init]  : Number of Events Loaded in init()6
    Before i started to bug TAC, I figured I'd post this here.
    Let me know your thoughts

    Looks like your package repository has been corrupted.  TAC can provide a procedure  to recover from this corruption.  The following DOC indicates  why this can happen and has suggestions on how to avoid these problems  from re-occuring.

Maybe you are looking for

  • C++ (Win32) V2.0.3 encoding problem

    I've tried to run on WinNT this program: if (ecode = xmlpar.xmlinit()) cout << "Failed to initialize XML parser, error " << ecode << endl;; return 1; if (ecode = xmlpar.xmlparse((oratext *) "testcase.xml", (oratext *) NULL, flags)) return 1; then I r

  • Can edit event title, day, and hour, but *not* minutes - Help!

    I can edit everything about my calendar event title, day, and hour, but not the minutes. This is very annoying and I'm not able to have accurate calendar entries. It's like there' s a glitch in the program. Can it be reloaded/rebooted? Using iCal 3.0

  • How to run Flash Player Lite on Xperia X1

    Hello, The installed program (metronome) that I want to run needs a running Flash Lite, otherwise it will not start. I´ve installed the Flash Player Lite 3.0 on my Sony Ericsson Xperia. But I can not find the Flash-Lite-Program in the program-folder

  • Since Mavericks installed Download Helper no longer works with YouTube

    Download helper now downloads empty files with no content, in both .flv and .mp4 formats.

  • RemoteFX hardships

    I am trying to get RemoteFX working. The Hyper-V host server is an HP DL380 G6 server with Intel E5540 cpu's. I have already verified that Intel VT-x with EPT is supported on the CPU. http://ark.intel.com/products/37104/Intel-Xeon-Processor-E5540-%28