RAC Install fails with "OCR upgrade failed with (-1073741819) on 10.2.0

I am trying to install RAC 10.2.0 with two Server 2003 R2 nodes connected to a fiber channel SAN. I have set up the shared storage, created the extended partitions, and setup the unformatted no drive letter volumes. Both servers see the unformatted volumes (and no others do). The preinstallation checks work fine and the installations works fine until the first configuration assistant runs. That would be the "Oracle Clusterware Configuration Assistant". It tries to run crssetup.config.bat and fails on step 3 (configuring OCR Repository) with
ocr upgrade failed with (-1073741819)
If I uninstall clusterware and try again it will not show the OCR and Voting disks as available disks until I delete the volumes and partitions and recreate them. I have run the precheck batch files and they show everything as good as well. When I define the OCR and Voting drives in the clusterware setup I do not select format or assign drive letter. Every time I try to do the install I get the exact same error.
Is there anything I am missing or some trick or patch I may not have done?

Take a look at this notes!!
Note 341214.1 - How To clean up after a Failed Oracle Clusterware Installation on Windows
Note 388730.1 - Oracle RAC Clusterware Installation on Windows Commonly Missed / Misunderstood Prerequisites
Rgrs,
Paulo.

Similar Messages

  • Windows 10 upgrade fail - black screen

    Hi - installed windows 10 via upgrade - failed part way through with the error message "something happened". Downloaded the install ISO for usb drive - did a clean install from that (including format HD) - win10 installed ok, then 10 min later screen went black. I left the pc for several hours - nothing happened so I did a hard reset. Now when I turn on it powers up, passes bios message, then hangs on black screen. If I hard reset again the windows diagnostic runs but finds no solution - I can boot in to Safe Mode but when restarting again goes back to black screen. I've tried plugging in an external monitor to the hdmi -no luck. Have tried clean reinstall several times- no luck. Any suggestions?

    If I don't install the graphics drivers, Windows Update automatically downloads and installs drivers which then cause the black screen. The only solution I have so far is to set my wifi connection as "metered" so it doesn't download and install updates automatically. I can install other updates and drivers manually, but this isn't ideal.

  • HELP WITH OCR

    Hello All. Thank Adobe for products and open SDK for developers it is useful.
    Please could anybody help me and may be some other developers with plug-in witch works with OCR.
    I try to OCR pdf file with 3 image pages inside, with help of Acrobat X 10.0.3 selfmade plug-in.
    There is minimum code inside my plug-in: just call OCR like:
    ASAtom cmdName;
    AVCommand cmd;
    cmdName      = ASAtomFromString("PaperCapture");
    cmd               = AVCommandNew (cmdName);
    ASCab config = ASCabNew();
    ASCabPutInt (config, "UIPolicy", kAVCommandUISilent);
    AVCommandSetConfig (cmd, config);  
    AVCommandStatus status = AVCommandExecute (cmd);
    All works fine, but during OCR process Acrobat shows "uncnown error on page 2" then "uncnown error on page 3" message with OK button.
    It happends when OCR at the end of the working with page when during creating outgouing content. It may be the bug inside OCR module.
    I try to separate all pages and page-by-page OCR works fine. Please help me and other users that try to make plug-ins to fix this.
    Best regards,
    Karpov M.A.
    Moscow, RUSSIA

    I don't see a link to the file.
    1 - There is a way to report bugs to Adobe, but I don't have the URL handy.  Try a web search.
    2 – You can use the various PDDoc & PDPage APIs to create new docs, and reassemble.
    From: Adobe Forums <[email protected]<mailto:[email protected]>>
    Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
    Date: Mon, 14 Nov 2011 09:02:45 -0800
    To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
    Subject: HELP WITH OCR
    Re: HELP WITH OCR
    created by AIR_MAK<http://forums.adobe.com/people/AIR_MAK> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4024644#4024644

  • TS1394 Can't re-install Leopard.  Trying to reinstall the OS because computer locks up.  It is a 2008 iMac that came with Leopard.  Upgraded to Snow Leopard.  Tried to archive and install from original DVD that came with iMac.  Installation failed, so tri

    Computer locks up, so I want to reinstall the OS. I had upgraded to Snow Leopard. 
    Tried to do an archive and install from the DVD that came with the computer, but that failed. 
    Tried to do an erase and install, but the install stops somewhere near the end, 13 minutes to go. Tried several times, same result.
    Can't reboot from the install disk, it just ejects the disk and I get the flashing question mark.
    Any suggestions will be appreciated.

    I think my hard drive is toast.  When I boot in single user mode, I get the following text:
    CSRHID Transition Driver: start booting in single user... will wait for window server
    Then the following text appears, repeating itself over and over, except that the numbers (indicated by "xxxxxxx")
    SAM Multimedia: READ or WRITE failed, SENSE_KEY = 0x03, ASC = 0x02, ASCQ = 0x00
    SAM Multimedia: READ or WRITE failed, SENSE_KEY = 0x03, ASC = 0x02, ASCQ = 0x00
    disk1s3: I/O error.
    0[level 3] [READUID 0] [Facility com.apple.system.fs] [ErrType IO] [Err No 51] [IDType READ] [PB1kNum xxxxxxxxx] [LB1kNum 0] [FSLogMsgID xxxxxxx] [FSLogMsgOrder First]
    0[Level 3] [READUID 0] [Facility com.apple.system.fs] [FSLogMsgID xxxxxxxxxx] [FSLogMsgOrder Last]
    These messages keep repeating with the numbers (xxxxxxxxx) changing with each iteration.
    Does this indicate a bad hard drive?
    Thanks.

  • SharePoint Search Service upgrade to 2013 fails: "Inner Exception: An item with the same key has already been added."

    Here's the situation:
    Upgrading a SharePoint Server 2010 Search Service Application dB to our SharePoint 2013 SP 1 development environment, using the Management Shell
    Running the following commands: 
    $applicationPool= Get-SPServiceApplicationPool -Identity 'SearchService_AppPool'
    $searchInst = Get-SPEnterpriseSearchServiceInstance -local
    Restore-SPEnterpriseSearchServiceApplication -Name 'SearchServiceApplication' -applicationpool $applicationPool -databasename 'SearchServiceApplicationDB' -databaseserver SERVERNAME -AdminSearchServiceInstance $searchInst
    Creates the search dBs (crawl, links, analytics) successfully; however, in the end, I get....
    "Exception: Action 15.0.107.0 of Microsoft.Office.Server.Search.Upgrade.SearchAdminDatabaseSequence failed."
    Looking at the ULS logs, I find the following:
    Inner Exception: An item with the same key has already been added.
    at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)     at Microsoft.Office.Server.Search.Administration.OOTBSchemaDefinition.FindAndFixExistingManagedProperties()     at Microsoft.Office.Server.Search.Administration.OOTBSchemaDefinition.InstallManagedProperties(Boolean
    upgrade)     at Microsoft.Office.Server.Search.Administration.OOTBSchemaDefinition.Upgrade()     at Microsoft.Office.Server.Search.Upgrade.UpdateAllOOTBProperties.Upgrade()     at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()
    Exception: Action 15.0.107.0 of Microsoft.Office.Server.Search.Upgrade.SearchAdminDatabaseSequence failed.
    at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()     at Microsoft.SharePoint.Upgrade.SPDatabaseSequence.Upgrade()     at Microsoft.Office.Server.Search.Upgrade.SearchDatabaseSequence.Upgrade()     at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object
    o, Boolean bRecurse)
    Anyone encounter anything like this during their search upgrade process? I'm not honestly even sure what duplicate value to look for at this point, if I were to run a SELECT Id, ClassId, ParentId, Name, Status, Version, Properties FROM Objects on
    "SharePoint_Config" in SSMS. Any insight or opinions on the matter are welcome; and thanks to those who choose to reply to this, in advance.

    Hi ,
    You can enable the ULS log on verbose level (note, remember to reset to default level after finished troubleshooting) for more information per the following article, then check there should be more useful message for helping solve the issue.
    http://www.brightworksupport.com/enabling-verbose-logging-to-compare-against-c/
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/12c99279-d3aa-46de-bc57-d5d250692ff0/upgrade-of-search-service-application-from-2010-to-2013-failure?forum=sharepointadmin
    https://www.simple-talk.com/blogs/2014/04/22/sharepoint-2010-to-2013-search-service-application-upgrade-issueaction-15-0-80-0-fails/http://blogs.msdn.com/b/biyengar/archive/2009/10/27/psconfig-failure-with-error-an-item-with-the-same-key-has-already-been-added.aspx
    Thanks,
    Daniel Yang
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] 
    Daniel Yang
    TechNet Community Support

  • Iphone 5- Won't show up in itunes. Error message " Device drivr software was not successfully installed. Please consult with your device manufacturer for assistance getting this device installed. Digital Still Camera- Failed" HELP!

    Error message  " Device driver software was not successfully installed. Please consult with your device manufacturer for assistance getting this device installed. Digital Still Camera- Failed" HELP!

    Hi, I was able to reformat my iPod and that worked. I read it on one of the threads and I am copy pasting the method below:
    I opened the "My Computer" window and right-clicked on my ipod, and then selected "Format". I select "Yes" to format since I don't have anything on the nano to delete anymore.
    I then Eject my nano from the computer and did a restart while the nano is disconnected from the computer.
    Once Windows finish loading I reconnect the USB to the nano(back of computer) which automatically pulls up iTune. It asked me to name the new ipod detected and created a playlist for that specific ipod name.
    Pasted from <http://discussions.apple.com/thread.jspa?threadID=1050784&tstart=15>
    Thanks!

  • Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901

    Hi Everyone,
    I have a program that sends information(analog output) to lab windows cvi in the form of a text file or user input.
    The program runs on the computers that I have the field point explorer and lab windows cvi installed on. In order to run the program without always installing labwindows/cvi and field point; I wanted to create an executable file that could be load on another computer.
    I used the create distribution kit part of labwindows/cvi to do this.After creating the distribution kit, I then installed it
    to another computer.
    My user interface appears on the screen, when the user clicks on the exe. file, but no data is sent to the field point module. I know that the data is being read from the user and textfile because in it appears in the uir.
    The following are some details about the problem:
    1. On another computer without labwindows/cvi and field point explorer not installed - no data is sent to field point module
    I know this because a current is being read on the current meter connected to field point module.
    My questions are the following:
    1. What are the possible reasons for the data not being sent to the field point module?
    2. Do I still need to create an iak. (Installing Field point Explorer) file stored on any new computer that I install my created distribution kit file too?
    Thankyou very much for any help that you can provide. I greatly appreciate it.
    Faen9901

    Re: Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901Faen9901,
    1) If you do not install FieldPoint Explorer, the FieldPoint Server is not installed so there is nothing on the target computer that knows how to talk to the FieldPoint system.
    2) Yes, you need an IAK file on the target computer. Assuming the settings (i.e. com port#) are identical you can simply include the iak file as part of the distribution.
    3) You also need to include as part of your installer the file "fplwmgr.dll". If this file is not installed, your program will not be able to access the FieldPoint Server. Alternatively, this file is installed automatically if FieldPoint Explorer detects LabWindows/CVI or Measurement Studio Development versions on the target computer or if you choose to do a custom FieldPoint Explorer installation and
    choose to provide LabWindows/CVI support.
    Regards,
    Aaron

  • ERROR: Third party payload installer Install Lightroom 5 CCM.exe failed with exit code: 1603

    Anyone out there that knows how to get past this? I´m using Adobe Application Manager and nothing else.
    Installed Photoshop and Illustrator without problem, but as I try to install Lightroom 5 it is aborted.

    I am having the same problem, I am using win vista 64, and everything but LR 5 works,
    {{ Third party payload installer Install Lightroom 5 CCM.exe failed with exit code: 1603 }}
    any solutions out there??

  • Sccm 2012 agent not installing with error CcmSetup failed with error code 0x80041013

    We have sccm 2012 r2 enviroment , when we deploy client agent to one DC , client agent is not getting install with below error .. I can able to install agent to all the machines except one DC.
    CcmGetOSVersion failed with 0x80041013
    CcmSetup failed with error code 0x80041013
    Any idea ?

    The error code 0x80041013 translates to:
    Provider load failure
    Source: Windows Management (WMI)
    Like Briij suggested, you should try to fix the WMI repository.
    Regards,
    Nickolaj Andersen | www.scconfigmgr.com | @Nickolaja

  • G580 Upgrade to Windows 10 failed in the SAFE_OS phase with an error during BOOT operation

    0xC1900101-0x20017 I could not successfully upgrade from windows update, nor from the straight download site.   The installation failed in the SAFE_OS phase with an error during BOOT operation.  I see w10 bios updates for other models.  Has anyone been successful in upgrading to W10 from W8?

    2015-07-31 21:36:19, Error CDiagnosticsHelper:etSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
    2015-07-31 21:36:19, Error CDiagnosticsHelper:etSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
    2015-07-31 21:36:21, Error MOUPG CDlpActionImpl<class CDlpErrorImpl<class CDlpObjectInternalImpl<class CUnknownImpl<class IMoSetupDlpAction> > > >:uspend(1066): Result = 0xC18001042015-07-31 21:36:21, Error MOUPG CSetupManager::ExecuteInstallMode(656): Result = 0x800705BB
    2015-07-31 21:36:21, Error MOUPG CSetupManager::ExecuteDownlevelMode(376): Result = 0x800705BB
    2015-07-31 21:36:21, Error MOUPG CSetupManager::Execute(222): Result = 0x800705BB
    2015-07-31 21:36:21, Error MOUPG CSetupHost::Execute(370): Result = 0x800705BB
    2015-07-31 21:36:21, Error MOUPG CDlpManager::AsyncSerializeDisable(471): Result = 0x80070216
    2015-07-31 21:36:36, Error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010101)
    2015-07-31 21:36:40, Error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010101)
    2015-07-31 21:37:02, Error CDiagnosticsHelper:etSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
    2015-07-31 21:37:03, Error CDiagnosticsHelper:etSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
    2015-07-31 21:37:04, Error CDiagnosticsHelper:etDeferredSQMDatapoint: Attempting to set a deferred SQM datapoint in an invalid SQM session[gle=0x000000b7]
    2015-07-31 21:37:04, Error CDiagnosticsHelper:etDeferredSQMDatapoint: Attempting to set a deferred SQM datapoint in an invalid SQM session[gle=0x000000b7]
    2015-07-31 21:37:11, Error CDiagnosticsHelper:etSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
    2015-07-31 21:39:15, Error CDiagnosticsHelper:etSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
    2015-07-31 21:39:18, Error CDiagnosticsHelper:etDeferredSQMDatapoint: Attempting to set a deferred SQM datapoint in an invalid SQM session[gle=0x000000b7]

  • Since installing Maverick on my 21in. 3.2ghz iMac, cannot upload to any application without it locking up, Aperature opens automatically, my printers don't work and Apple has failed to reschedule a appointment with a Tech on Case *******in 3wks

    Since installing Maverick on my 21in. 3.2ghz iMac, cannot upload to any application without it locking up, Aperature opens automatically, my printers don't work and Apple has failed to reschedule a appointment with a Tech on Case ********* in 3wks
    <Edited by Host>

    Sorry you've decided this is a rant but the objective observer would know that  all I want is a solution to at least the 3 issues mentioned. I spent the better part of 2 nights with techs that had me doing all the standard refresh items, i.e. setting the PRAM... and as time goes on my frustration grows. Last week spent days trying to find the driver software Maverick now needs and Apple is supposed to have it and doesn't. So at what point does this become a rant? I've done things the right way had mucho patience thus far and as a kicker, Apple won't let me download Mountain Lion to reinstall and rid my self of Maverick. Tell me, would you complain?

  • Connection with license server failed sap after upgrade to 8.8

    Hi
    I had just upgraded to 2007b pl14 to 8.8 everything done good but when I login it giving me erroer "connection with license server failed"
    I had restarted the licence server but still it same
    And my licance server option is also disable ?
    plz help me out

    Hi,
    check the below link, it will help you........
    Re: Error in Server Tools Installation
    Rgds,
    Priya

  • I am trying to download & install Photoshop 6 but  setup fails with "Installer failed to initialize

    I am trying to download & install Photoshop 6 but  setup fails with "Installer failed to initialize Download Adobe Support Advisor" I then downloaded and ran the Support Advisor; it reported NO problems.
    I can still can not load Photoshop 6!

    Lw_jr01 to clarify when you are trying to install Photoshop CS6 you are receving the error message that the, "Installer Failed to Initialize."  Is that correct?  If so which operating system are you using?

  • Mssql 2005 express SP4 upgrade fail with error code 1603

    The patch install through windows update is fail, then I do it manually, SQL server Database Services setup failed.
    Here is the setup log
    Property(S): USERNAME = Windows User
    Property(S): PackagecodeChanging = 1
    Property(S): ProductToBeRegistered = 1
    Property(S): ProductState = 5
    Property(S): TRANSFORMS = :SqlRun01.mst;:InstID01.mst;:InstName01.mst
    Property(S): PackageCode = {49616E1E-6C6B-4938-B811-352C355EFDCE}
    Property(S): MsiLogFileLocation = C:\Program Files (x86)\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_W2K8FS_SQL.log
    Property(S): AdministratorsGroup = BUILTIN\Administrators
    Property(S): UsersGroup = BUILTIN\Users
    Property(S): ModuleID_SYSDB2 = 75D79626_87FB_4E9A_B07F_87DAE18D0F36
    Property(S): TempFolder = C:\Users\admin\AppData\Local\Temp\
    Property(S): WindowsFolder = C:\Windows\
    Property(S): CommonFilesFolder.D9BC9C10_2DCD_44D3_AACC_9C58CAF76128 = C:\Program Files (x86)\Common Files\
    MSI (s) (B0:F8) [11:55:54:332]: Note: 1: 1729
    MSI (s) (B0:F8) [11:55:54:332]: Product: Microsoft SQL Server 2005 Express Edition -- Configuration failed.
    MSI (s) (B0:F8) [11:55:54:333]: Windows Installer reconfigured the product. Product Name: Microsoft SQL Server 2005 Express Edition. Product Version: 9.4.5000.00. Product Language: 1033. Reconfiguration success or error status: 1603.
    MSI (s) (B0:F8) [11:55:54:355]: Deferring clean up of packages/files, if any exist
    MSI (s) (B0:F8) [11:55:54:355]: MainEngineThread is returning 1603
    MSI (s) (B0:40) [11:55:54:356]: RESTART MANAGER: Session closed.
    MSI (s) (B0:40) [11:55:54:356]: No System Restore sequence number for this installation.
    === Logging stopped: 1/10/2012 11:55:54 ===
    MSI (s) (B0:40) [11:55:54:358]: User policy value 'DisableRollback' is 0
    MSI (s) (B0:40) [11:55:54:358]: Machine policy value 'DisableRollback' is 0
    MSI (s) (B0:40) [11:55:54:358]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (B0:40) [11:55:54:359]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (B0:40) [11:55:54:359]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (B0:40) [11:55:54:360]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
    MSI (s) (B0:40) [11:55:54:360]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
    MSI (s) (B0:40) [11:55:54:360]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
    MSI (s) (B0:40) [11:55:54:360]: Restoring environment variables
    MSI (s) (B0:40) [11:55:54:361]: Destroying RemoteAPI object.
    MSI (s) (B0:AC) [11:55:54:361]: Custom Action Manager thread ending.
    MSI (c) (04:88) [11:55:54:364]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
    MSI (c) (04:88) [11:55:54:366]: MainEngineThread is returning 1603
    Please help.... Thanks~~

    Thanks your quick reply,
    As I checked before, the version is 9.3.4035
    Please check the summary.txt
    Microsoft SQL Server 2005 9.00.5000.00 
    ============================== 
    OS Version      : Service Pack 2 (Build 6002) 
    Time            : Tue Jan 10 11:52:15 2012 
    w2k8fs : 64-bit ASP.Net is Registered. Required 32-bit ASP.Net to install Microsoft Reporting Services 2005(32-bit).
    Machine         : w2k8fs 
    Product         : Microsoft SQL Server Setup Support Files (English) 
    Product Version : 9.00.5000.00 
    Install         : Successful 
    Log File        : C:\Program Files (x86)\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_w2k8fs_SQLSupport_1.log 
    Machine         : w2k8fs 
    Product         : Microsoft SQL Server Native Client 
    Product Version : 9.00.5000.00 
    Install         : Successful 
    Log File        : C:\Program Files (x86)\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_w2k8fs_SQLNCLI_1.log 
    Machine         : w2k8fs 
    Product         : Microsoft SQL Server VSS Writer 
    Product Version : 9.00.5000.00 
    Install         : Successful 
    Log File        : C:\Program Files (x86)\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_w2k8fs_SqlWriter_1.log 
    Machine         : w2k8fs
    Product         : SQL Server Database Services
    Error           : The setup has encountered an unexpected error while Setting Internal Properties. The error is: Fatal error during installation.
    Machine         : w2k8fs 
    Product         : Microsoft SQL Server 2005 Express Edition 
    Product Version : 9.4.5000.00 
    Install         : Failed 
    Log File        : C:\Program Files (x86)\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_w2k8fs_SQL.log 
    Last Action     : SetInstanceProperty 
    Error String    : The setup has encountered an unexpected error while Setting Internal Properties. The error is: Fatal error during installation. 
    Error Number    : 29528 
     SQL Server Setup failed. For more information, review the Setup log file in %ProgramFiles%\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt. 

  • Root.ah fails on 2nd node(rac2) with [ ORA-15018,ORA-15017,ORA-15003 ]

    Hi All,
    I m trying to setup 11gR2 Grid installation on two-node Rac . When it comes to running root.sh on second node (i.e. rac2) it fails with below error. Could please anyone help me out. This is my 3rd attempt and all fails with below errors on node 2.
    rac2:
    [root@rac2 grid_home]# ./root.sh
    Running Oracle 11g root.sh script...
    The following environment variables are set as:
        ORACLE_OWNER= grid
        ORACLE_HOME=  /u01/grid_home
    Enter the full pathname of the local bin directory: [/usr/local/bin]:
       Copying dbhome to /usr/local/bin ...
       Copying oraenv to /usr/local/bin ...
       Copying coraenv to /usr/local/bin ...
    Creating /etc/oratab file...
    Entries will be added to the /etc/oratab file as needed by
    Database Configuration Assistant when a database is created
    Finished running generic part of root.sh script.
    Now product-specific root actions will be performed.
    2013-07-10 18:53:15: Parsing the host name
    2013-07-10 18:53:15: Checking for super user privileges
    2013-07-10 18:53:15: User has super user privileges
    Using configuration parameter file: /u01/grid_home/crs/install/crsconfig_params
    Creating trace directory
    LOCAL ADD MODE
    Creating OCR keys for user 'root', privgrp 'root'..
    Operation successful.
    Adding daemon to inittab
    CRS-4123: Oracle High Availability Services has been started.
    ohasd is starting
    CRS-2672: Attempting to start 'ora.gipcd' on 'rac2'
    CRS-2672: Attempting to start 'ora.mdnsd' on 'rac2'
    CRS-2676: Start of 'ora.gipcd' on 'rac2' succeeded
    CRS-2676: Start of 'ora.mdnsd' on 'rac2' succeeded
    CRS-2672: Attempting to start 'ora.gpnpd' on 'rac2'
    CRS-2676: Start of 'ora.gpnpd' on 'rac2' succeeded
    CRS-2672: Attempting to start 'ora.cssdmonitor' on 'rac2'
    CRS-2676: Start of 'ora.cssdmonitor' on 'rac2' succeeded
    CRS-2672: Attempting to start 'ora.cssd' on 'rac2'
    CRS-2672: Attempting to start 'ora.diskmon' on 'rac2'
    CRS-2676: Start of 'ora.diskmon' on 'rac2' succeeded
    CRS-2676: Start of 'ora.cssd' on 'rac2' succeeded
    CRS-2672: Attempting to start 'ora.ctssd' on 'rac2'
    CRS-2676: Start of 'ora.ctssd' on 'rac2' succeeded
    DiskGroup CRS creation failed with the following message:
    ORA-15018: diskgroup cannot be created
    ORA-15017: diskgroup "CRS" cannot be mounted
    ORA-15003: diskgroup "CRS" already mounted in another lock name space
    Configuration of ASM failed, see logs for details
    Did not succssfully configure and start ASM
    CRS-2500: Cannot stop resource 'ora.crsd' as it is not running
    CRS-4000: Command Stop failed, or completed with errors.
    Command return code of 1 (256) from command: /u01/grid_home/bin/crsctl stop resource ora.crsd -init
    Stop of resource "ora.crsd -init" failed
    Failed to stop CRSD
    CRS-2673: Attempting to stop 'ora.asm' on 'rac2'
    CRS-2677: Stop of 'ora.asm' on 'rac2' succeeded
    CRS-2673: Attempting to stop 'ora.ctssd' on 'rac2'
    CRS-2677: Stop of 'ora.ctssd' on 'rac2' succeeded
    CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'rac2'
    CRS-2677: Stop of 'ora.cssdmonitor' on 'rac2' succeeded
    CRS-2673: Attempting to stop 'ora.cssd' on 'rac2'
    CRS-2677: Stop of 'ora.cssd' on 'rac2' succeeded
    CRS-2673: Attempting to stop 'ora.gpnpd' on 'rac2'
    CRS-2677: Stop of 'ora.gpnpd' on 'rac2' succeeded
    CRS-2673: Attempting to stop 'ora.gipcd' on 'rac2'
    CRS-2677: Stop of 'ora.gipcd' on 'rac2' succeeded
    CRS-2673: Attempting to stop 'ora.mdnsd' on 'rac2'
    CRS-2677: Stop of 'ora.mdnsd' on 'rac2' succeeded
    Initial cluster configuration failed.  See /u01/grid_home/cfgtoollogs/crsconfig/rootcrs_rac2.log for details
    [root@rac2 grid_home]#
    rac2  alertrac2.log
    [root@rac2 rac2]# cat -n alertrac2.log
         1  Oracle Database 11g Clusterware Release 11.2.0.1.0 - Production Copyright 1996, 2009 Oracle. All rights reserved.
         2  2013-07-10 18:53:16.145
         3  [client(13088)]CRS-2106:The OLR location /u01/grid_home/cdata/rac2.olr is inaccessible. Details in /u01/grid_home/log/rac2/client/ocrconfig_13088.log.
         4  2013-07-10 18:53:16.228
         5  [client(13088)]CRS-2101:The OLR was formatted using version 3.
         6  2013-07-10 18:53:31.734
         7  [ohasd(13132)]CRS-2112:The OLR service started on node rac2.
         8  2013-07-10 18:53:31.893
         9  [ohasd(13132)]CRS-2772:Server 'rac2' has been assigned to pool 'Free'.
        10  2013-07-10 18:53:53.762
        11  [ohasd(13132)]CRS-2302:Cannot get GPnP profile. Error CLSGPNP_NO_DAEMON (GPNPD daemon is not running).
        12  2013-07-10 18:53:55.381
        13  [cssd(14409)]CRS-1713:CSSD daemon is started in exclusive mode
        14  2013-07-10 18:54:01.530
        15  [cssd(14409)]CRS-1709:Lease acquisition failed for node rac2 because no voting file has been configured; Details at (:CSSNM00031:) in /u01/grid_home/log/rac2/cssd/ocssd.log
        16  2013-07-10 18:54:19.113
        17  [cssd(14409)]CRS-1601:CSSD Reconfiguration complete. Active nodes are rac2 .
        18  2013-07-10 18:54:19.910
        19  [ctssd(14465)]CRS-2403:The Cluster Time Synchronization Service on host rac2 is in observer mode.
        20  2013-07-10 18:54:19.920
        21  [ctssd(14465)]CRS-2407:The new Cluster Time Synchronization Service reference node is host rac2.
        22  2013-07-10 18:54:20.903
        23  [ctssd(14465)]CRS-2401:The Cluster Time Synchronization Service started on host rac2.
        24  [client(14715)]CRS-10001:ACFS-9327: Verifying ADVM/ACFS devices.
        25  [client(14719)]CRS-10001:ACFS-9322: done.
        26  2013-07-10 18:54:47.104
        27  [ctssd(14465)]CRS-2405:The Cluster Time Synchronization Service on host rac2 is shutdown by user
        28  2013-07-10 18:54:55.837
        29  [cssd(14409)]CRS-1603:CSSD on node rac2 shutdown by user.
    rac2 rootcrs logfile
    [root@rac2 rac2]# cat  /u01/grid_home/cfgtoollogs/crsconfig/rootcrs_rac2.log
    2013-07-10 18:53:15: The configuration parameter file /u01/grid_home/crs/install/crsconfig_params is valid
    2013-07-10 18:53:15: Checking for super user privileges
    2013-07-10 18:53:15: User has super user privileges
    2013-07-10 18:53:15: ### Printing the configuration values from files:
    2013-07-10 18:53:15:    /u01/grid_home/crs/install/crsconfig_params
    2013-07-10 18:53:15:    /u01/grid_home/crs/install/s_crsconfig_defs
    2013-07-10 18:53:15: ASM_DISCOVERY_STRING=
    2013-07-10 18:53:15: ASM_DISKS=ORCL:CRS1
    2013-07-10 18:53:15: ASM_DISK_GROUP=CRS
    2013-07-10 18:53:15: ASM_REDUNDANCY=EXTERNAL
    2013-07-10 18:53:15: ASM_SPFILE=
    2013-07-10 18:53:15: ASM_UPGRADE=false
    2013-07-10 18:53:15: CLSCFG_MISSCOUNT=
    2013-07-10 18:53:15: CLUSTER_GUID=
    2013-07-10 18:53:15: CLUSTER_NAME=rac-scan
    2013-07-10 18:53:15: CRS_NODEVIPS='rac1-vip/255.255.255.0/eth0,rac2-vip/255.255.255.0/eth0'
    2013-07-10 18:53:15: CRS_STORAGE_OPTION=1
    2013-07-10 18:53:15: CSS_LEASEDURATION=400
    2013-07-10 18:53:15: DIRPREFIX=
    2013-07-10 18:53:15: DISABLE_OPROCD=0
    2013-07-10 18:53:15: EMBASEJAR_NAME=oemlt.jar
    2013-07-10 18:53:15: EWTJAR_NAME=ewt3.jar
    2013-07-10 18:53:15: EXTERNAL_ORACLE_BIN=/opt/oracle/bin
    2013-07-10 18:53:15: GNS_ADDR_LIST=
    2013-07-10 18:53:15: GNS_ALLOW_NET_LIST=
    2013-07-10 18:53:15: GNS_CONF=false
    2013-07-10 18:53:15: GNS_DENY_ITF_LIST=
    2013-07-10 18:53:15: GNS_DENY_NET_LIST=
    2013-07-10 18:53:15: GNS_DOMAIN_LIST=
    2013-07-10 18:53:15: GPNPCONFIGDIR=/u01/grid_home
    2013-07-10 18:53:15: GPNPGCONFIGDIR=/u01/grid_home
    2013-07-10 18:53:15: GPNP_PA=
    2013-07-10 18:53:15: HELPJAR_NAME=help4.jar
    2013-07-10 18:53:15: HOST_NAME_LIST=rac1,rac2
    2013-07-10 18:53:15: ID=/etc/init.d
    2013-07-10 18:53:15: INIT=/sbin/init
    2013-07-10 18:53:15: IT=/etc/inittab
    2013-07-10 18:53:15: JEWTJAR_NAME=jewt4.jar
    2013-07-10 18:53:15: JLIBDIR=/u01/grid_home/jlib
    2013-07-10 18:53:15: JREDIR=/u01/grid_home/jdk/jre/
    2013-07-10 18:53:15: LANGUAGE_ID=AMERICAN_AMERICA.AL32UTF8
    2013-07-10 18:53:15: MSGFILE=/var/adm/messages
    2013-07-10 18:53:15: NETCFGJAR_NAME=netcfg.jar
    2013-07-10 18:53:15: NETWORKS="eth0"/192.168.0.0:public,"eth1"/192.168.1.0:cluster_interconnect
    2013-07-10 18:53:15: NEW_HOST_NAME_LIST=
    2013-07-10 18:53:15: NEW_NODEVIPS='rac1-vip/255.255.255.0/eth0,rac2-vip/255.255.255.0/eth0'
    2013-07-10 18:53:15: NEW_NODE_NAME_LIST=
    2013-07-10 18:53:15: NEW_PRIVATE_NAME_LIST=
    2013-07-10 18:53:15: NODELIST=rac1,rac2
    2013-07-10 18:53:15: NODE_NAME_LIST=rac1,rac2
    2013-07-10 18:53:15: OCFS_CONFIG=
    2013-07-10 18:53:15: OCRCONFIG=/etc/oracle/ocr.loc
    2013-07-10 18:53:15: OCRCONFIGDIR=/etc/oracle
    2013-07-10 18:53:15: OCRID=
    2013-07-10 18:53:15: OCRLOC=ocr.loc
    2013-07-10 18:53:15: OCR_LOCATIONS=NO_VAL
    2013-07-10 18:53:15: OLASTGASPDIR=/etc/oracle/lastgasp
    2013-07-10 18:53:15: OLRCONFIG=/etc/oracle/olr.loc
    2013-07-10 18:53:15: OLRCONFIGDIR=/etc/oracle
    2013-07-10 18:53:15: OLRLOC=olr.loc
    2013-07-10 18:53:15: OPROCDCHECKDIR=/etc/oracle/oprocd/check
    2013-07-10 18:53:15: OPROCDDIR=/etc/oracle/oprocd
    2013-07-10 18:53:15: OPROCDFATALDIR=/etc/oracle/oprocd/fatal
    2013-07-10 18:53:15: OPROCDSTOPDIR=/etc/oracle/oprocd/stop
    2013-07-10 18:53:15: ORACLE_BASE=/u01/11.2.0
    2013-07-10 18:53:15: ORACLE_HOME=/u01/grid_home
    2013-07-10 18:53:15: ORACLE_OWNER=grid
    2013-07-10 18:53:15: ORA_ASM_GROUP=asmadmin
    2013-07-10 18:53:15: ORA_DBA_GROUP=oinstall
    2013-07-10 18:53:15: PRIVATE_NAME_LIST=
    2013-07-10 18:53:15: RCALLDIR=/etc/rc.d/rc0.d /etc/rc.d/rc1.d /etc/rc.d/rc2.d /etc/rc.d/rc3.d /etc/rc.d/rc4.d /etc/rc.d/rc5.d /etc/rc.d/rc6.d
    2013-07-10 18:53:15: RCKDIR=/etc/rc.d/rc0.d /etc/rc.d/rc1.d /etc/rc.d/rc2.d /etc/rc.d/rc4.d /etc/rc.d/rc6.d
    2013-07-10 18:53:15: RCSDIR=/etc/rc.d/rc3.d /etc/rc.d/rc5.d
    2013-07-10 18:53:15: RC_KILL=K19
    2013-07-10 18:53:15: RC_KILL_OLD=K96
    2013-07-10 18:53:15: RC_START=S96
    2013-07-10 18:53:15: SCAN_NAME=rac-scan.naveed.com
    2013-07-10 18:53:15: SCAN_PORT=1521
    2013-07-10 18:53:15: SCRBASE=/etc/oracle/scls_scr
    2013-07-10 18:53:15: SHAREJAR_NAME=share.jar
    2013-07-10 18:53:15: SILENT=false
    2013-07-10 18:53:15: SO_EXT=so
    2013-07-10 18:53:15: SRVCFGLOC=srvConfig.loc
    2013-07-10 18:53:15: SRVCONFIG=/var/opt/oracle/srvConfig.loc
    2013-07-10 18:53:15: SRVCONFIGDIR=/var/opt/oracle
    2013-07-10 18:53:15: VNDR_CLUSTER=false
    2013-07-10 18:53:15: VOTING_DISKS=NO_VAL
    2013-07-10 18:53:15: ### Printing other configuration values ###
    2013-07-10 18:53:15: CLSCFG_EXTRA_PARMS=
    2013-07-10 18:53:15: CRSDelete=0
    2013-07-10 18:53:15: CRSPatch=0
    2013-07-10 18:53:15: DEBUG=
    2013-07-10 18:53:15: DOWNGRADE=
    2013-07-10 18:53:15: HAS_GROUP=oinstall
    2013-07-10 18:53:15: HAS_USER=root
    2013-07-10 18:53:15: HOST=rac2
    2013-07-10 18:53:15: IS_SIHA=0
    2013-07-10 18:53:15: OLR_DIRECTORY=/u01/grid_home/cdata
    2013-07-10 18:53:15: OLR_LOCATION=/u01/grid_home/cdata/rac2.olr
    2013-07-10 18:53:15: ORA_CRS_HOME=/u01/grid_home
    2013-07-10 18:53:15: SUPERUSER=root
    2013-07-10 18:53:15: UPGRADE=
    2013-07-10 18:53:15: VF_DISCOVERY_STRING=
    2013-07-10 18:53:15: addfile=/u01/grid_home/crs/install/crsconfig_addparams
    2013-07-10 18:53:15: crscfg_trace=1
    2013-07-10 18:53:15: crscfg_trace_file=/u01/grid_home/cfgtoollogs/crsconfig/rootcrs_rac2.log
    2013-07-10 18:53:15: hosts=
    2013-07-10 18:53:15: oldcrshome=
    2013-07-10 18:53:15: oldcrsver=
    2013-07-10 18:53:15: osdfile=/u01/grid_home/crs/install/s_crsconfig_defs
    2013-07-10 18:53:15: parameters_valid=1
    2013-07-10 18:53:15: paramfile=/u01/grid_home/crs/install/crsconfig_params
    2013-07-10 18:53:15: platform_family=unix
    2013-07-10 18:53:15: srvctl_trc_suff=0
    2013-07-10 18:53:15: unlock_crshome=
    2013-07-10 18:53:15: user_is_superuser=1
    2013-07-10 18:53:15: ### Printing of configuration values complete ###
    2013-07-10 18:53:15: Oracle CRS stack is not configured yet
    2013-07-10 18:53:15: CRS is not yet configured. Hence, will proceed to configure CRS
    2013-07-10 18:53:15: Cluster-wide one-time actions... Done!
    2013-07-10 18:53:15: Oracle CRS home = /u01/grid_home
    2013-07-10 18:53:15: Host name = rac2
    2013-07-10 18:53:15: CRS user = grid
    2013-07-10 18:53:15: Oracle CRS home = /u01/grid_home
    2013-07-10 18:53:15: GPnP host = rac2
    2013-07-10 18:53:15: Oracle GPnP home = /u01/grid_home/gpnp
    2013-07-10 18:53:15: Oracle GPnP local home = /u01/grid_home/gpnp/rac2
    2013-07-10 18:53:15: GPnP directories verified.
    2013-07-10 18:53:15: Checking to see if Oracle CRS stack is already configured
    2013-07-10 18:53:15: Oracle CRS stack is not configured yet
    2013-07-10 18:53:15: ---Checking local gpnp setup...
    2013-07-10 18:53:15: The setup file "/u01/grid_home/gpnp/rac2/profiles/peer/profile.xml" does not exist
    2013-07-10 18:53:15: The setup file "/u01/grid_home/gpnp/rac2/wallets/peer/cwallet.sso" does not exist
    2013-07-10 18:53:15: The setup file "/u01/grid_home/gpnp/rac2/wallets/prdr/cwallet.sso" does not exist
    2013-07-10 18:53:15: chk gpnphome /u01/grid_home/gpnp/rac2: profile_ok 0 wallet_ok 0 r/o_wallet_ok 0
    2013-07-10 18:53:15: chk gpnphome /u01/grid_home/gpnp/rac2: INVALID (bad profile/wallet)
    2013-07-10 18:53:15: ---Checking cluster-wide gpnp setup...
    2013-07-10 18:53:15: chk gpnphome /u01/grid_home/gpnp: profile_ok 1 wallet_ok 1 r/o_wallet_ok 1
    2013-07-10 18:53:15: gpnptool: run /u01/grid_home/bin/gpnptool verify -p="/u01/grid_home/gpnp/profiles/peer/profile.xml" -w="file:/u01/grid_home/gpnp/wallets/peer" -wu=peer
    2013-07-10 18:53:15: Running as user grid: /u01/grid_home/bin/gpnptool verify -p="/u01/grid_home/gpnp/profiles/peer/profile.xml" -w="file:/u01/grid_home/gpnp/wallets/peer" -wu=peer
    2013-07-10 18:53:15: s_run_as_user2: Running /bin/su grid -c ' /u01/grid_home/bin/gpnptool verify -p="/u01/grid_home/gpnp/profiles/peer/profile.xml" -w="file:/u01/grid_home/gpnp/wallets/peer" -wu=peer '
    2013-07-10 18:53:15: Removing file /tmp/file0qKE0c
    2013-07-10 18:53:15: Successfully removed file: /tmp/file0qKE0c
    2013-07-10 18:53:15: /bin/su successfully executed
    2013-07-10 18:53:15: gpnptool: rc=0
    2013-07-10 18:53:15: gpnptool output:
    Profile signature is valid.
    2013-07-10 18:53:15: Profile "/u01/grid_home/gpnp/profiles/peer/profile.xml" signature is VALID for wallet "file:/u01/grid_home/gpnp/wallets/peer"
    2013-07-10 18:53:15: gpnptool: run /u01/grid_home/bin/gpnptool verify -p="/u01/grid_home/gpnp/profiles/peer/profile.xml" -w="file:/u01/grid_home/gpnp/wallets/prdr" -wu=peer
    2013-07-10 18:53:15: Running as user grid: /u01/grid_home/bin/gpnptool verify -p="/u01/grid_home/gpnp/profiles/peer/profile.xml" -w="file:/u01/grid_home/gpnp/wallets/prdr" -wu=peer
    2013-07-10 18:53:15: s_run_as_user2: Running /bin/su grid -c ' /u01/grid_home/bin/gpnptool verify -p="/u01/grid_home/gpnp/profiles/peer/profile.xml" -w="file:/u01/grid_home/gpnp/wallets/prdr" -wu=peer '
    2013-07-10 18:53:16: Removing file /tmp/filebkOtBv
    2013-07-10 18:53:16: Successfully removed file: /tmp/filebkOtBv
    2013-07-10 18:53:16: /bin/su successfully executed
    2013-07-10 18:53:16: gpnptool: rc=0
    2013-07-10 18:53:16: gpnptool output:
    Profile signature is valid.
    2013-07-10 18:53:16: Profile "/u01/grid_home/gpnp/profiles/peer/profile.xml" signature is VALID for wallet "file:/u01/grid_home/gpnp/wallets/prdr"
    2013-07-10 18:53:16: chk gpnphome /u01/grid_home/gpnp: OK
    2013-07-10 18:53:16: GPnP Wallets ownership/permissions successfully set.
    2013-07-10 18:53:16: gpnp setup checked: local valid? 0 cluster-wide valid? 1
    2013-07-10 18:53:16: Taking cluster-wide setup as local
    2013-07-10 18:53:16:   copy "/u01/grid_home/gpnp/profiles/peer/profile.xml" => "/u01/grid_home/gpnp/rac2/profiles/peer/profile.xml"
    2013-07-10 18:53:16:   set ownership on "/u01/grid_home/gpnp/rac2/profiles/peer/profile.xml" => (grid,oinstall)
    2013-07-10 18:53:16:   copy "/u01/grid_home/gpnp/wallets/peer/cwallet.sso" => "/u01/grid_home/gpnp/rac2/wallets/peer/cwallet.sso"
    2013-07-10 18:53:16:   set ownership on "/u01/grid_home/gpnp/rac2/wallets/peer/cwallet.sso" => (grid,oinstall)
    2013-07-10 18:53:16:   copy "/u01/grid_home/gpnp/wallets/prdr/cwallet.sso" => "/u01/grid_home/gpnp/rac2/wallets/prdr/cwallet.sso"
    2013-07-10 18:53:16:   set ownership on "/u01/grid_home/gpnp/rac2/wallets/prdr/cwallet.sso" => (grid,oinstall)
    2013-07-10 18:53:16:   copy "/u01/grid_home/gpnp/profiles/peer/profile_orig.xml" => "/u01/grid_home/gpnp/rac2/profiles/peer/profile_orig.xml"
    2013-07-10 18:53:16:   set ownership on "/u01/grid_home/gpnp/rac2/profiles/peer/profile_orig.xml" => (grid,oinstall)
    2013-07-10 18:53:16:   copy "/u01/grid_home/gpnp/wallets/root/ewallet.p12" => "/u01/grid_home/gpnp/rac2/wallets/root/ewallet.p12"
    2013-07-10 18:53:16:   set ownership on "/u01/grid_home/gpnp/rac2/wallets/root/ewallet.p12" => (grid,oinstall)
    2013-07-10 18:53:16:   copy "/u01/grid_home/gpnp/wallets/pa/cwallet.sso" => "/u01/grid_home/gpnp/rac2/wallets/pa/cwallet.sso"
    2013-07-10 18:53:16:   set ownership on "/u01/grid_home/gpnp/rac2/wallets/pa/cwallet.sso" => (grid,oinstall)
    2013-07-10 18:53:16:   copy "/u01/grid_home/gpnp/wallets/root/b64certificate.txt" => "/u01/grid_home/gpnp/rac2/wallets/root/b64certificate.txt"
    2013-07-10 18:53:16:   set ownership on "/u01/grid_home/gpnp/rac2/wallets/root/b64certificate.txt" => (grid,oinstall)
    2013-07-10 18:53:16:   copy "/u01/grid_home/gpnp/wallets/peer/cert.txt" => "/u01/grid_home/gpnp/rac2/wallets/peer/cert.txt"
    2013-07-10 18:53:16:   set ownership on "/u01/grid_home/gpnp/rac2/wallets/peer/cert.txt" => (grid,oinstall)
    2013-07-10 18:53:16:   copy "/u01/grid_home/gpnp/wallets/pa/cert.txt" => "/u01/grid_home/gpnp/rac2/wallets/pa/cert.txt"
    2013-07-10 18:53:16:   set ownership on "/u01/grid_home/gpnp/rac2/wallets/pa/cert.txt" => (grid,oinstall)
    2013-07-10 18:53:16: GPnP Wallets ownership/permissions successfully set.
    2013-07-10 18:53:16: gpnp setup: GOTCLUSTERWIDE
    2013-07-10 18:53:16: Validating for SI-CSS configuration
    2013-07-10 18:53:16: Retrieving OCR main disk location
    2013-07-10 18:53:16: Opening file OCRCONFIG
    2013-07-10 18:53:16: Value () is set for key=ocrconfig_loc
    2013-07-10 18:53:16: Unable to retrieve ocr disk info
    2013-07-10 18:53:16: Checking to see if any 9i GSD is up
    2013-07-10 18:53:16: libskgxnBase_lib = /etc/ORCLcluster/oracm/lib/libskgxn2.so
    2013-07-10 18:53:16: libskgxn_lib = /opt/ORCLcluster/lib/libskgxn2.so
    2013-07-10 18:53:16: SKGXN library file does not exists
    2013-07-10 18:53:16: OLR location = /u01/grid_home/cdata/rac2.olr
    2013-07-10 18:53:16: Oracle CRS Home = /u01/grid_home
    2013-07-10 18:53:16: Validating /etc/oracle/olr.loc file for OLR location /u01/grid_home/cdata/rac2.olr
    2013-07-10 18:53:16: /etc/oracle/olr.loc already exists. Backing up /etc/oracle/olr.loc to /etc/oracle/olr.loc.orig
    2013-07-10 18:53:16: Oracle CRS home = /u01/grid_home
    2013-07-10 18:53:16: Oracle cluster name = rac-scan
    2013-07-10 18:53:16: OCR locations = +CRS
    2013-07-10 18:53:16: Validating OCR
    2013-07-10 18:53:16: Retrieving OCR location used by previous installations
    2013-07-10 18:53:16: Opening file OCRCONFIG
    2013-07-10 18:53:16: Value () is set for key=ocrconfig_loc
    2013-07-10 18:53:16: Opening file OCRCONFIG
    2013-07-10 18:53:16: Value () is set for key=ocrmirrorconfig_loc
    2013-07-10 18:53:16: Opening file OCRCONFIG
    2013-07-10 18:53:16: Value () is set for key=ocrconfig_loc3
    2013-07-10 18:53:16: Opening file OCRCONFIG
    2013-07-10 18:53:16: Value () is set for key=ocrconfig_loc4
    2013-07-10 18:53:16: Opening file OCRCONFIG
    2013-07-10 18:53:16: Value () is set for key=ocrconfig_loc5
    2013-07-10 18:53:16: Checking if OCR sync file exists
    2013-07-10 18:53:16: No need to sync OCR file
    2013-07-10 18:53:16: OCR_LOCATION=+CRS
    2013-07-10 18:53:16: OCR_MIRROR_LOCATION=
    2013-07-10 18:53:16: OCR_MIRROR_LOC3=
    2013-07-10 18:53:16: OCR_MIRROR_LOC4=
    2013-07-10 18:53:16: OCR_MIRROR_LOC5=
    2013-07-10 18:53:16: Current OCR location=
    2013-07-10 18:53:16: Current OCR mirror location=
    2013-07-10 18:53:16: Current OCR mirror loc3=
    2013-07-10 18:53:16: Current OCR mirror loc4=
    2013-07-10 18:53:16: Current OCR mirror loc5=
    2013-07-10 18:53:16: Verifying current OCR settings with user entered values
    2013-07-10 18:53:16: Setting OCR locations in /etc/oracle/ocr.loc
    2013-07-10 18:53:16: Validating OCR locations in /etc/oracle/ocr.loc
    2013-07-10 18:53:16: Checking for existence of /etc/oracle/ocr.loc
    2013-07-10 18:53:16: Backing up /etc/oracle/ocr.loc to /etc/oracle/ocr.loc.orig
    2013-07-10 18:53:16: Setting ocr location +CRS
    2013-07-10 18:53:16: Creating or upgrading Oracle Local Registry (OLR)
    2013-07-10 18:53:16: OLR successfully created or upgraded
    2013-07-10 18:53:16: /u01/grid_home/bin/clscfg -localadd
    2013-07-10 18:53:16: Keys created in the OLR successfully
    2013-07-10 18:53:16: GPnP setup state: new-cluster-wide
    2013-07-10 18:53:16: GPnP cluster configuration already performed
    2013-07-10 18:53:16: Registering ohasd
    2013-07-10 18:53:16: init file = /u01/grid_home/crs/init/init.ohasd
    2013-07-10 18:53:16: Copying file /u01/grid_home/crs/init/init.ohasd to /etc/init.d directory
    2013-07-10 18:53:16: Setting init.ohasd permission in /etc/init.d directory
    2013-07-10 18:53:16: init file = /u01/grid_home/crs/init/ohasd
    2013-07-10 18:53:16: Copying file /u01/grid_home/crs/init/ohasd to /etc/init.d directory
    2013-07-10 18:53:16: Setting ohasd permission in /etc/init.d directory
    2013-07-10 18:53:16: Removing "/etc/rc.d/rc3.d/S96ohasd"
    2013-07-10 18:53:16: Removing file /etc/rc.d/rc3.d/S96ohasd
    2013-07-10 18:53:16: Failure with return code 1 from command rm /etc/rc.d/rc3.d/S96ohasd
    2013-07-10 18:53:16: Failed to remove file:
    2013-07-10 18:53:16: Creating a link "/etc/rc.d/rc3.d/S96ohasd" pointing to /etc/init.d/ohasd
    2013-07-10 18:53:16: Removing "/etc/rc.d/rc5.d/S96ohasd"
    2013-07-10 18:53:16: Removing file /etc/rc.d/rc5.d/S96ohasd
    2013-07-10 18:53:16: Failure with return code 1 from command rm /etc/rc.d/rc5.d/S96ohasd
    2013-07-10 18:53:16: Failed to remove file:
    2013-07-10 18:53:16: Creating a link "/etc/rc.d/rc5.d/S96ohasd" pointing to /etc/init.d/ohasd
    2013-07-10 18:53:16: Removing "/etc/rc.d/rc0.d/K19ohasd"
    2013-07-10 18:53:16: Removing file /etc/rc.d/rc0.d/K19ohasd
    2013-07-10 18:53:16: Failure with return code 1 from command rm /etc/rc.d/rc0.d/K19ohasd
    2013-07-10 18:53:16: Failed to remove file:
    2013-07-10 18:53:16: Creating a link "/etc/rc.d/rc0.d/K19ohasd" pointing to /etc/init.d/ohasd
    2013-07-10 18:53:16: Removing "/etc/rc.d/rc1.d/K19ohasd"
    2013-07-10 18:53:16: Removing file /etc/rc.d/rc1.d/K19ohasd
    2013-07-10 18:53:16: Failure with return code 1 from command rm /etc/rc.d/rc1.d/K19ohasd
    2013-07-10 18:53:16: Failed to remove file:
    2013-07-10 18:53:16: Creating a link "/etc/rc.d/rc1.d/K19ohasd" pointing to /etc/init.d/ohasd
    2013-07-10 18:53:16: Removing "/etc/rc.d/rc2.d/K19ohasd"
    2013-07-10 18:53:16: Removing file /etc/rc.d/rc2.d/K19ohasd
    2013-07-10 18:53:16: Failure with return code 1 from command rm /etc/rc.d/rc2.d/K19ohasd
    2013-07-10 18:53:16: Failed to remove file:
    2013-07-10 18:53:16: Creating a link "/etc/rc.d/rc2.d/K19ohasd" pointing to /etc/init.d/ohasd
    2013-07-10 18:53:16: Removing "/etc/rc.d/rc4.d/K19ohasd"
    2013-07-10 18:53:16: Removing file /etc/rc.d/rc4.d/K19ohasd
    2013-07-10 18:53:16: Failure with return code 1 from command rm /etc/rc.d/rc4.d/K19ohasd
    2013-07-10 18:53:16: Failed to remove file:
    2013-07-10 18:53:16: Creating a link "/etc/rc.d/rc4.d/K19ohasd" pointing to /etc/init.d/ohasd
    2013-07-10 18:53:16: Removing "/etc/rc.d/rc6.d/K19ohasd"
    2013-07-10 18:53:16: Removing file /etc/rc.d/rc6.d/K19ohasd
    2013-07-10 18:53:16: Failure with return code 1 from command rm /etc/rc.d/rc6.d/K19ohasd
    2013-07-10 18:53:16: Failed to remove file:
    2013-07-10 18:53:16: Creating a link "/etc/rc.d/rc6.d/K19ohasd" pointing to /etc/init.d/ohasd
    2013-07-10 18:53:16: The file ohasd has been successfully linked to the RC directories
    2013-07-10 18:53:16: Starting ohasd
    2013-07-10 18:53:16: itab entries=
    2013-07-10 18:53:21: Created backup /etc/inittab.no_crs
    2013-07-10 18:53:21: Appending to /etc/inittab.tmp:
    2013-07-10 18:53:21: h1:35:respawn:/etc/init.d/init.ohasd run >/dev/null 2>&1 </dev/null
    2013-07-10 18:53:21: Done updating /etc/inittab.tmp
    2013-07-10 18:53:21: Saved /etc/inittab.crs
    2013-07-10 18:53:21: Installed new /etc/inittab
    2013-07-10 18:53:36: ohasd is starting
    2013-07-10 18:53:36: Checking ohasd
    2013-07-10 18:53:37: ohasd started successfully
    2013-07-10 18:53:37: Creating CRS resources and dependencies
    2013-07-10 18:53:37: Configuring HASD
    2013-07-10 18:53:37: Registering type ora.daemon.type
    2013-07-10 18:53:37: Registering type ora.mdns.type
    2013-07-10 18:53:37: Registering type ora.gpnp.type
    2013-07-10 18:53:38: Registering type ora.gipc.type
    2013-07-10 18:53:38: Registering type ora.cssd.type
    2013-07-10 18:53:38: Registering type ora.cssdmonitor.type
    2013-07-10 18:53:39: Registering type ora.crs.type
    2013-07-10 18:53:39: Registering type ora.evm.type
    2013-07-10 18:53:39: Registering type ora.ctss.type
    2013-07-10 18:53:40: Registering type ora.asm.type
    2013-07-10 18:53:40: Registering type ora.drivers.acfs.type
    2013-07-10 18:53:40: Registering type ora.diskmon.type
    2013-07-10 18:53:51: ADVM/ACFS is configured
    2013-07-10 18:53:51: Successfully created CRS resources for cluster daemon and ASM
    2013-07-10 18:53:51: Checking if initial configuration has been performed
    2013-07-10 18:53:51: Starting CSS in exclusive mode
    2013-07-10 18:54:19: CRS-2672: Attempting to start 'ora.gipcd' on 'rac2'
    2013-07-10 18:54:19: CRS-2672: Attempting to start 'ora.mdnsd' on 'rac2'
    2013-07-10 18:54:19: CRS-2676: Start of 'ora.gipcd' on 'rac2' succeeded
    2013-07-10 18:54:19: CRS-2676: Start of 'ora.mdnsd' on 'rac2' succeeded
    2013-07-10 18:54:19: CRS-2672: Attempting to start 'ora.gpnpd' on 'rac2'
    2013-07-10 18:54:19: CRS-2676: Start of 'ora.gpnpd' on 'rac2' succeeded
    2013-07-10 18:54:19: CRS-2672: Attempting to start 'ora.cssdmonitor' on 'rac2'
    2013-07-10 18:54:19: CRS-2676: Start of 'ora.cssdmonitor' on 'rac2' succeeded
    2013-07-10 18:54:19: CRS-2672: Attempting to start 'ora.cssd' on 'rac2'
    2013-07-10 18:54:19: CRS-2672: Attempting to start 'ora.diskmon' on 'rac2'
    2013-07-10 18:54:19: CRS-2676: Start of 'ora.diskmon' on 'rac2' succeeded
    2013-07-10 18:54:19: CRS-2676: Start of 'ora.cssd' on 'rac2' succeeded
    2013-07-10 18:54:19: Querying for existing CSS voting disks
    2013-07-10 18:54:19: Performing initial configuration for cluster
    2013-07-10 18:54:21: Start of resource "ora.ctssd -init" Succeeded
    2013-07-10 18:54:21: Configuring ASM via ASMCA
    2013-07-10 18:54:21: Executing as grid: /u01/grid_home/bin/asmca -silent -diskGroupName CRS -diskList ORCL:CRS1 -redundancy EXTERNAL -configureLocalASM
    2013-07-10 18:54:21: Running as user grid: /u01/grid_home/bin/asmca -silent -diskGroupName CRS -diskList ORCL:CRS1 -redundancy EXTERNAL -configureLocalASM
    2013-07-10 18:54:21:   Invoking "/u01/grid_home/bin/asmca -silent -diskGroupName CRS -diskList ORCL:CRS1 -redundancy EXTERNAL -configureLocalASM" as user "grid"
    2013-07-10 18:54:40: Configuration of ASM failed, see logs for details
    2013-07-10 18:54:40: Did not succssfully configure and start ASM
    2013-07-10 18:54:40: Exiting exclusive mode
    2013-07-10 18:54:40: Command return code of 1 (256) from command: /u01/grid_home/bin/crsctl stop resource ora.crsd -init
    2013-07-10 18:54:40: Stop of resource "ora.crsd -init" failed
    2013-07-10 18:54:40: Failed to stop CRSD
    2013-07-10 18:55:04: Initial cluster configuration failed.  See /u01/grid_home/cfgtoollogs/crsconfig/rootcrs_rac2.log for details
    Also below are some of the configs related to rac2 node
    [root@rac2 rac2]# rpm -qa | grep oracleasm
    oracleasmlib-2.0.4-1.el5
    oracleasm-support-2.1.8-1.el5
    oracleasm-2.6.18-274.el5xen-2.0.5-1.el5
    oracleasm-2.6.18-274.el5-2.0.5-1.el5
    oracleasm-2.6.18-274.el5debug-2.0.5-1.el5
    oracleasm-2.6.18-274.el5-debuginfo-2.0.5-1.el5
    [root@rac2 rac2]# /usr/sbin/oracleasm configure
    ORACLEASM_ENABLED=true
    ORACLEASM_UID=grid
    ORACLEASM_GID=asmadmin
    ORACLEASM_SCANBOOT=true
    ORACLEASM_SCANORDER=""
    ORACLEASM_SCANEXCLUDE=""
    ORACLEASM_USE_LOGICAL_BLOCK_SIZE="false"
    [root@rac2 rac2]# /usr/sbin/oracleasm status
    Checking if ASM is loaded: yes
    Checking if /dev/oracleasm is mounted: yes
    [root@rac2 rac2]# /usr/sbin/oracleasm listdisks
    CRS1
    DATA1
    FRA1
    [root@rac2 rac2]# ls -l /dev/oracleasm/disks/
    total 0
    brw-rw---- 1 grid asmadmin 8, 17 Jul 10 18:35 CRS1
    brw-rw---- 1 grid asmadmin 8, 33 Jul 10 18:36 DATA1
    brw-rw---- 1 grid asmadmin 8, 49 Jul 10 18:36 FRA1
    [root@rac2 rac2]# cat /etc/hosts
    # Do not remove the following line, or various programs
    # that require network functionality will fail.
    127.0.0.1               localhost.localdomain localhost
    ::1             localhost6.localdomain6 localhost6
    #Public IP's(eth0)
    192.168.0.101    rac1.naveed.com    rac1
    192.168.0.102    rac2.naveed.com    rac2
    #Private IP's(eth1)
    192.168.1.101    rac1-prv.naveed.com   rac1-prv
    192.168.1.102    rac2-prv.naveed.com   rac2-prv
    #VIPS
    192.168.0.221    rac1-vip.naveed.com   rac1-vip
    192.168.0.222    rac2-vip.naveed.com   rac2-vip
    #DNS server IP
    192.168.0.10    naveeddns.naveed.com   naveeddns
    [root@rac2 rac2]#
    Thanks in advance

    Hi,
    First of all thanks a lot for the response. You wont't beleive this is my 7th fresh installation and everytime in node 2 i m hit with this same error.
    Also i tried below procedure instead of fresh installation
    once i deconfig & rerun (./rootcrs.pl -verbose -deconfig -force) on node 2
    Using configuration parameter file: ./crsconfig_params
    PRCR-1119 : Failed to look up CRS resources of ora.cluster_vip_net1.type type
    PRCR-1068 : Failed to query resources
    Cannot communicate with crsd
    PRCR-1070 : Failed to check if resource ora.gsd is registered
    Cannot communicate with crsd
    PRCR-1070 : Failed to check if resource ora.ons is registered
    Cannot communicate with crsd
    CRS-4535: Cannot communicate with Cluster Ready Services
    CRS-4000: Command Stop failed, or completed with errors.
    CRS-2791: Starting shutdown of Oracle High Availability Services-managed resources on 'rac2'
    CRS-2673: Attempting to stop 'ora.drivers.acfs' on 'rac2'
    CRS-2673: Attempting to stop 'ora.asm' on 'rac2'
    CRS-2673: Attempting to stop 'ora.ctssd' on 'rac2'
    CRS-2673: Attempting to stop 'ora.mdnsd' on 'rac2'
    CRS-2677: Stop of 'ora.mdnsd' on 'rac2' succeeded
    CRS-2677: Stop of 'ora.asm' on 'rac2' succeeded
    CRS-2673: Attempting to stop 'ora.cluster_interconnect.haip' on 'rac2'
    CRS-2677: Stop of 'ora.ctssd' on 'rac2' succeeded
    CRS-2677: Stop of 'ora.cluster_interconnect.haip' on 'rac2' succeeded
    CRS-2673: Attempting to stop 'ora.cssd' on 'rac2'
    CRS-2677: Stop of 'ora.cssd' on 'rac2' succeeded
    CRS-2673: Attempting to stop 'ora.gipcd' on 'rac2'
    CRS-2677: Stop of 'ora.drivers.acfs' on 'rac2' succeeded
    CRS-2677: Stop of 'ora.gipcd' on 'rac2' succeeded
    CRS-2673: Attempting to stop 'ora.gpnpd' on 'rac2'
    CRS-2677: Stop of 'ora.gpnpd' on 'rac2' succeeded
    CRS-2793: Shutdown of Oracle High Availability Services-managed resources on 'rac2' has completed
    CRS-4133: Oracle High Availability Services has been stopped.
    Successfully deconfigured Oracle clusterware stack on this node
    [root@rac2 grid_home]# ./root.sh
    Performing root user operation for Oracle 11g
    The following environment variables are set as:
        ORACLE_OWNER= grid
        ORACLE_HOME=  /u01/grid_home
    Enter the full pathname of the local bin directory: [/usr/local/bin]:
    The contents of "dbhome" have not changed. No need to overwrite.
    The contents of "oraenv" have not changed. No need to overwrite.
    The contents of "coraenv" have not changed. No need to overwrite.
    Entries will be added to the /etc/oratab file as needed by
    Database Configuration Assistant when a database is created
    Finished running generic part of root script.
    Now product-specific root actions will be performed.
    Using configuration parameter file: /u01/grid_home/crs/install/crsconfig_params
    User ignored Prerequisites during installation
    OLR initialization - successful
    Adding Clusterware entries to inittab
    CRS-2672: Attempting to start 'ora.mdnsd' on 'rac2'
    CRS-2676: Start of 'ora.mdnsd' on 'rac2' succeeded
    CRS-2672: Attempting to start 'ora.gpnpd' on 'rac2'
    CRS-2676: Start of 'ora.gpnpd' on 'rac2' succeeded
    CRS-2672: Attempting to start 'ora.cssdmonitor' on 'rac2'
    CRS-2672: Attempting to start 'ora.gipcd' on 'rac2'
    CRS-2676: Start of 'ora.cssdmonitor' on 'rac2' succeeded
    CRS-2676: Start of 'ora.gipcd' on 'rac2' succeeded
    CRS-2672: Attempting to start 'ora.cssd' on 'rac2'
    CRS-2672: Attempting to start 'ora.diskmon' on 'rac2'
    CRS-2676: Start of 'ora.diskmon' on 'rac2' succeeded
    CRS-2676: Start of 'ora.cssd' on 'rac2' succeeded
    ASM created and started successfully.
    Disk Group CRS mounted successfully.
    clscfg: -install mode specified
    Successfully accumulated necessary OCR keys.
    Creating OCR keys for user 'root', privgrp 'root'..
    Operation successful.
    Successful addition of voting disk 636af26485ef4f27bfec31523aaa0660.
    Successfully replaced voting disk group with +CRS.
    CRS-4266: Voting file(s) successfully replaced
    ##  STATE    File Universal Id                File Name Disk group
    1. ONLINE   636af26485ef4f27bfec31523aaa0660 (ORCL:CRS1) [CRS]
    Located 1 voting disk(s).
    Start of resource "ora.crsd" failed
    CRS-2800: Cannot start resource 'ora.asm' as it is already in the INTERMEDIATE state on server 'rac2'
    CRS-4000: Command Start failed, or completed with errors.
    Failed to start Oracle Grid Infrastructure stack
    Failed to start Cluster Ready Services at /u01/grid_home/crs/install/crsconfig_lib.pm line 1286.
    /u01/grid_home/perl/bin/perl -I/u01/grid_home/perl/lib -I/u01/grid_home/crs/install /u01/grid_home/crs/install/rootcrs.pl execution failed

Maybe you are looking for

  • Request set not getting picked up by concurrent manager.

    Hi All We have an issue today where the daily scheduled request set did not run and status for which remained at "Pending Scheduled". Concurrent Manager did not pick up this and status remained: This request is waiting to be processed by the Conflict

  • WPS54G connection question

    I never had a wireless server before so my question may not make sense, but here is what I am trying to do. My wife's computer is in another room of the house, and it is connected to the Internet through a cable modem (we use Comcast cable for intern

  • IPod Nano 5th Gen... Deleting Songs from iPod while connected to iTunes

    Hello, There are some songs on my iPod Nano that I want to delete from the iPod but still keep in Library... When I connect my iPod to my Mac, all of the songs show up that are on my iPod but I am unable to click the song and delete it from my iPod.

  • Send mail using class

    Hi, I need to send PDF files as attachment to a mail using Classes. Is there a way to do it ? Thanks. David

  • Anyone Else Have Troubles With 11.1.2 (32) -- Slow? Freezing? ...

    The only change I've made to my system recently is upgrading when the software upgrade asked me to.  Now I find iTunes sorta wonky -- especially in the "Albums View" -- it lags, it freezes, that beachball spins, ... I'm still running OSX 10.6.8 and a