RAC Installation (Valid IP Error)
Hello Guys,
I am installing 2 nodes RAC 10g R2 on windows XP platform.
Each node contains 2 network cards for private, public and virtual IPs.
Following is the seeting of TCP/IP on each node.
Node 1
Netwrok Card 1
Public IP : 192.168.0.140
Virtual IP : 192.168.0.141
Entry of these IPs exist in DNS
Network Card 2
Private IP : 10.0.0.1 - Entry exist in host file with the computer name
Node 2
Netwrok Card 1
Public IP : 192.168.0.142
Virtual IP : 192.168.0.143
Entry of these IPs exist in DNS
Network Card 2
Private IP : 10.0.0.2 - - Entry exist in host file with the computer name
Now during installtion where we have to configure IPs of node its says:
"The following Public IP do not resolve to a valid hostname. Enter Valid IP that maps hostname to continue"
How to rectify this error to continue....
Please Help.
Imran
Node 1
# Copyright (c) 1993-1999 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
127.0.0.1 localhost
10.0.0.2 bss-training71
bss-training71.beaconhouse.edu.pk is the public name of this node
192.168.0.142 is public IP Registerted in DNS
192.168.0.143 is Virtual IP Registerted in DNS
255.255.252.0 is the Subnet Mask for above IPs.
Node 2
# Copyright (c) 1993-1999 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
127.0.0.1 localhost
10.0.0.1 bss-training78
bss-training.beaconhouse.edu.pk is the public host name for this machine
192.168.0.140 is public IP Registerted in DNS
192.168.0.141 is Virtual IP Registerted in DNS
255.255.252.0 is the Subnet Mask for above IPs.
Hope it will clear the situation...
Regards,
Imran
Similar Messages
-
Oracle 9.2 RAC installation error on raw devices
During Oracle 9.2 RAC installation on Linux Red Hat 7.3 on raw devices
Database Configuration Assistant
returned the error message:
"Raw device validation check for Data File
"/dev/raw/clustdb_raw_cwmlite_100m" failed, No such file or directory".
Really this file exists, this is a link to a raw device.
How does Oracle validate the raw file?
What does this error mean?
Igor.During Oracle 9.2 RAC installation on Linux Red Hat 7.3 on raw devices
Database Configuration Assistant
returned the error message:
"Raw device validation check for Data File
"/dev/raw/clustdb_raw_cwmlite_100m" failed, No such file or directory".
Really this file exists, this is a link to a raw device.OK, so you are saying that /dev/raw/clustdb_raw_cwmlite_100m is link to /dev/raw/raw<x> (x some number)??
If not - there is your error.
How does Oracle validate the raw file?File MUST exists (or link) AND it must be a RAW device.
You can check it by raw -qa (it should display all raw devices, with theirs major-minor pairs)
What does this error mean?
Igor. Hrvoje -
CRS-0213 error during 10g RAC installation
The two nodes are 2 Sun machines. The Oracle CRS installation went smoothly without incidents. I then kicked in the 10g DB RAC installation. At the end of the installation, I got error. I took a snapshot here:
http://bostonfx.com/temp/ora10g.gif
Any advise is much appreciated,
LucasHi Lucas -
This sounds simliar to Bug 3584146 PRKR-1008 adding instance to CRS via SRVCTL. The published workaround follows:
The workaround is to give permissions on the vip resources for all oracle users on the machine.
crs_setperm ora.<nodename>.vip -u user:<orauser1>:rwx
crs_setperm ora.<nodename>.vip -u user:<orauser2>:rwx
Repeat this for all oracle users on the system.
Hope this helps
-shawn -
10g RAC installation fails....
Hello All,
I am new to RAC installation.while doing the installation in 2node cluster,till the configuration assisstants windows everything went fine. in CA while checking the status,the oracle clusterware config assistant failed with the following log....
INFO: Starting Install on nodes 'server004'
INFO: Saving Cluster Inventory
INFO: Running command 'C:\DOCUME~1\uit0076\LOCALS~1\Temp\1\OraInstall2010-05-18_11-41-42AM\oui\bin\setup.exe -jreLoc C:\DOCUME~1\uit0076\LOCALS~1\Temp\1\OraInstall2010-05-18_11-41-42AM\jre\1.4.2 -paramFile C:\DOCUME~1\uit0076\LOCALS~1\Temp\1\OraInstall2010-05-18_11-41-42AM\oui/clusterparam.ini -silent -ignoreSysPrereqs -attachHome -noClusterEnabled ORACLE_HOME=C:\oracle\product\10.2.0\crs ORACLE_HOME_NAME=OraCr10g_home CLUSTER_NODES=server003,server004 CRS=true "INVENTORY_LOCATION=C:\Program Files\Oracle\Inventory" LOCAL_NODE=server004 -remoteInvocation -invokingNodeName server003 -logFilePath "C:\Program Files\Oracle\Inventory/logs" -timestamp 2010-05-18_11-41-42AM' on the nodes 'server004'.
INFO: Deleting service 'OracleOUIOraCr10g_homeService' on nodes 'server004'.
INFO: Creating service 'OracleOUIOraCr10g_homeService' on nodes 'server004'.
INFO: Starting service 'OracleOUIOraCr10g_homeService' on nodes 'server004'.
INFO: Stopping service OracleOUIOraCr10g_homeService on nodes server004.
INFO: Deleting service 'OracleOUIOraCr10g_homeService' on nodes 'server004'.
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: RUN_RECOMMENDED_TOOLS FIRST is set to false
INFO: No of Recommended Tools5
INFO: plugin-list is created
INFO: pluginlist is updated for: Oracle Clusterware current size: 1
INFO: No of ExitOnly Tools in this session: 0
INFO: cf session for perform has hashcode: 1040982
INFO: detached tool list getting prepared fo comp: Oracle Clusterware
INFO: cfsession hashcode for exit only tools: 1040982
INFO: hashcode for action: 17596838
INFO: No of ExitOnly Tools: 0
INFO: saving exit only tools ...
INFO: no detached only tools in this session
INFO: exit-only tools are created in single installation
INFO: no. of sets of tools to be run: 1
INFO: ca page to be shown: true
INFO: exitonly tools to be excuted passed: 0
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/install/crssetup.config.bat
Step 1: checking status of CRS cluster
Step 2: creating directories (C:\oracle\product\10.2.0\crs)
Step 3: configuring OCR repository
ocr upgrade failed with (-1073741819)
Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/install/crssetup.config.bat has failed
INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\crs
Configuration directory is set to C:\oracle\product\10.2.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
Have 1GB RAM in both the nodes.
could any one help me to solve this?
Thanks,
Derick
Edited by: user4487322 on May 18, 2010 1:46 AMThank you madrid.I am installing the RAC in windows2003 sp2 server.in the link till the step no#12(12. The Configuration Assistants page appears.)everything went
fine.while checking the 'Virtual Private IP Configuration Assistant',the installation fails with following error.....
INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" succeeded
INFO: Command = C:\oracle\product\10.2.0\crs/bin/racgons.exe add_config server003:6200 server004:6200
INFO: Configuration assistant "Oracle Notification Server Configuration Assistant" succeeded
INFO: Command = C:\oracle\product\10.2.0\crs/bin/oifcfg.exe setif -global "Local Area Connection"/10.28.25.0:public "Local Area Connection 2"/10.10.10.0:cluster_interconnect
INFO: Configuration assistant "Oracle Private Interconnect Configuration Assistant" succeeded
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/bin/vipca.bat -silent -nodelist "server003,server004" -nodevips "server003/vipserver003/255.255.255.0/Local Area Connection,server004/vipserver004/255.255.255.0/Local Area Connection"
Execution of the plugin was aborted
INFO: Configuration assistant "Virtual Private IP Configuration Assistant" was canceled.
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\crs
Configuration directory is set to C:\oracle\product\10.2.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/bin/vipca.bat -silent -nodelist "server003,server004" -nodevips "server003/vipserver003/255.255.255.0/Local Area Connection,server004/vipserver004/255.255.255.0/Local Area Connection"
Execution of the plugin was aborted
INFO: Configuration assistant "Virtual Private IP Configuration Assistant" was canceled.
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/bin/vipca.bat -silent -nodelist "server003,server004" -nodevips "server003/vipserver003/255.255.255.0/Local Area Connection,server004/vipserver004/255.255.255.0/Local Area Connection"
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\crs
Configuration directory is set to C:\oracle\product\10.2.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
I am able tp ping all my IP's from both the nodes,with host name &alias specified in the host file.
any thing else to be checked to fix "Virtual Private IP Configuration Assistant"?Any help? -
I have an iPhone 4 so I downloaded iOS 7.03 but it doesn't installe it says error accured what can I do to make it install
when one download something from the Internet corruption can happen making the data defect
when this happen the computer notice it and don't attempt to install the damaged software on the phone which would damage it
if one try right away to redownload something from the Internet ones isp just give one a copy from their cache (they can't detect if all data in their cache is valid because that would slow everything down)
wait a bit and the cache will be cleared and you will have a new attempt to download and flash your ios device with the update should it prove uncorrupted this time -
Steps For Oracle10gR2 RAC installation on windows 2003 enteprise edition
can any one tell me what are the steps for oracle 10gR2 installation on windows 2003 enterprise edition. i would like to know two-node RAC setup with SAN
Hi,
Were you able you do the 11gr1 RAC installation on Windows 2008? I am struck with configuring Storage as onfigure Shared Storage windows does not show any disks. Also runcluvfy fails with below error.
Check: System architecture
Node Name Available Required Comment
rac11 unknown 32-bit failed
rac22 unknown 32-bit failed
Result: System architecture check failed.
Can anyone throw more light to resolve this issue.
Note that i have successfully does this on Windows 2003.
Any help will be highly appreciable.
Thanks
Nilanjan -
Problems with RAC installation with Windows 2000 Advanced Server
Hello,
I've two servers in cluster mode with W2K Advanced Server, and a RAID-5 array of 4 disks shared by both of them. My problem is that I've installed The Cluster Service of Windows in order to have an active/passive configuration of my servers, because I have a common directory structure that is accessed by the PC's of the LAN.
By another hand, I want to install Oracle Real Application Cluster to manage my Oracle database but after create the extended partition and the logical drives when I execute the file \preinstallation_rac\clustersetup\clustersetup.exe to create the cluster, when I select the option Create a cluster the following error message appears me:
"Any disk Oracle partition has been found. Stop this wizard, create an Oracle partition and try it
again."
I'd like to know if it's possible to have the Service Cluster of Windows 2k and the Oracle clusterware?¿ Altough before begining the installation I've stopped my Cluster Service as documentation suggests. If somebody knows what it's happening to me I'd be really very grateful.
Thanks in advance,
IsabelHello Joel,
I've already read all documentation provided by Oracle about Real Application Clusters
and I've not found anything to solve my problem. Certainly I want to use OCFS but when I
try to execute preinstall_rac\clustersetup.exe to install CFS the error appear and I can't
continue with RAC installation.
Besides I've tried command "lsnodes -v" and got :
Could not load CM.dll
Could not initialize cluster
And when I've tried to run "clustercheck" I've got :
** Copy File: Create Directory failed - Error 183
** Directory = \\192.168.1.111\Cy$\Temp\opsm
Created directory \\192.168.1.112\Cy$\Temp\opsm
Could not copy file to other nodes [error = 183]
I've read metalink Note 186130.1 Clustercheck Fails with Windows Error 183 and the only
proof I haven't done is get the clustercheck.exe release1(9.0.1).
Any suggestion will be very appreciated.Thanks,
Isabel -
hi
i m trying to install 9i RAC on windows 2000....installation guide realy doesnt work....according to installation guide i created logical drives on my single hard disk and down loaded CLUSTER FILE SYSTEM pack from oracle website.....next step is to run CLUSTERSETUP.EXE file in preinstall_rac\clustersetup\folders but it returns me error when i click NEXT on second screen(Create Cluster) and error message is "Unable to find an oracle disk partition. Please exit from the wizard, create Oracle partitions and try again"
can some one tell me all steps briefly??? for example what would i do firt and what afterwards etc....
do i need to run something on all node before starting any installation??? if yes then how? and do i need to create raw unformated logical drives after performing any specific configuring other nods in RAC...kindly tell me all steps...may i have a single hard drive whos one partition is NTFS and on the same physical hard drive i can create extended and then logical p[artition?
Best Regardsyou dont wrote about tasks of your rac installation.
if you need oas cluster there is a next problem: you cannt use network load balancer because nlb is not comppatible with mscs.
but i dont know about problems with database cluster.
im used such configuration last year.
Now i have the rac10g/db10g/ofs/mscs configuration.
wbr -
Hi
I am trying to install RAC on vmware (10gr2 , OEL5) using two virtual machines named RAC1 and RAC2
i am able to do ssh rac1 date and ssh rac2 date without password.
But while installing clusterware i get following on the command prompt.
Caught Cluster ExceptionPRKC-1044 : Failed to check remote command execution setup for node rac1.localdomain using shells /usr/bin/ssh and /usr/bin/rsh
rac1.localdomain: Connection refused
[PRKC-1044 : Failed to check remote command execution setup for node rac1.localdomain using shells /usr/bin/ssh and /usr/bin/rsh
rac1.localdomain: Connection refused]
[PRKC-1044 : Failed to check remote command execution setup for node rac1.localdomain using shells /usr/bin/ssh and /usr/bin/rsh
rac1.localdomain: Connection refused
[PRKC-1044 : Failed to check remote command execution setup for node rac1.localdomain using shells /usr/bin/ssh and /usr/bin/rsh
rac1.localdomain: Connection refused]]
is it normal??? am i missing something.
KhuranaYes, SSH equivalence is some thing you will need for clusterware install, operations, any future node additions and any kind of Oracle Home propagation. Get cluvfy's opinion on ssh equivalence, if cluvfy thinks it is working, it will work.
I would certainly run cluvfy before and after clusterware installation. Check out cluvfy documentation for pre crsinst and post crsinst options. Make sure to address all cluvfy errors and warnings before you proceed from each stage to the next stage of your RAC installation.
Good luck -
How to cleanup / remove RAC installation (CRS,RDBMS,ASM)
Hi, all
How to remove or cleanup RAC installation after ran OUI deinstall it couldn't finish and get a error... because 1 node of 3 was off (the box).
ACSDon't forget to mention the Oracle version you're working with.
-
Today I noticed this message in the event viewer:
Event ID: 16387Severity: ErrorSource: Microsoft-Windows-Security-SPPLog: ApplicationMessage: Failed to run task \Microsoft\Windows\WS\License Validation. Error Code: 0x80041326
Does this mean the free eval use version of Windows Server 2012 has expired?
OS: Windows Server 2012 RC Build 8400
ThanksHello Darrell:
Thank you for responding to my issue. Here is the output you requested:
Windows Script Host
Software licensing service version: 6.2.8400.0
Name: Windows(R), ServerDatacenter edition
Description: Windows(R) Operating System, RETAIL channel
Activation ID: c3dbac02-e65b-48bc-a61e-e14befbdd674
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 03612-01333-001-000805-00-1033-8400.0000-2382012
Installation ID: 090195464127466880553502868392878303995792363977152161148874086
Use License URL: https://activation.sls.microsoft.com/SLActivateProduct/SLActivateProduct.asmx?configextension=Retail
Validation URL: https://validation.sls.microsoft.com/SLWGA/slwga.asmx
Partial Product Key: 78KXV
License Status: Licensed
Evaluation End Date: 1/15/2013 3:59:59 PM
Remaining Windows rearm count: 1000
Trusted time: 9/15/2012 3:37:56 PM
OK
Your request for info got me thinking about another oddity I've been working on this week - My firewall (NetGear SRX5308) shows dropped incoming packets from ip 65.55.121.94 with source port 443 and destination port 55338. ARIN shows the ip belongs
to MICROSOFT-1BLK, aka Microsoft. Is it possible that my firewall is blocking communication to MS's licensing servers? -
SWPM RAC DB instance install error on srvctl add database -d
Hello,
We are currently installing a distributed NW 7.31 system with Oracle RAC on ASM.
SCS ran successfully ,and now we are trying to install db instance.
During phase 'Create database' the installation stops with error code 1.
The log is:
WARNING 2014-04-28 19:14:00.451
CJSlibModule::writeWarning_impl()
Execution of the command "/oracle/ISP/112/bin/srvctl add database -d ISP -o /oracle/ISP/112 -p +ISP_DATA/ISP/spfileISP.ora -a ISP_DATA" finished with return code 1. Output:
/oracle/ISP/112/bin/srvctl: line 87: dirname: No such file or directory
/oracle/ISP/112/bin/srvctl: line 94: dirname: No such file or directory
/oracle/ISP/112/bin/srvctl: line 148: uname: No such file or directory
****ORACLE_HOME environment variable is not set.
ORACLE_HOME should be set to the main
directory that contains Oracle products.
Set and export ORACLE_HOME, then re-run.
ERROR 2014-04-28 19:14:00.454
CJSlibModule::writeError_impl()
CJS-30023 Process call '/oracle/ISP/112/bin/srvctl add database -d ISP -o /oracle/ISP/112 -p +ISP_DATA/ISP/spfileISP.ora -a ISP_DATA' exits with error code 1. For details see log file(s) srvctl.log.
I don't know why the SWPM asks for the spfile if this is a fresh installation. The only file that exists is initISP.ora
Perhaps SWPM was supposed to create an spfile<SID>.ora from init<SID>.ora?
I hope someone out there has encountered this before
Best Regards,
FabianHello,
I'm facing the same problem with SWPM:
An error occurred while processing option SAP NetWeaver 7.0 including Enhancement Package 2 > Software Life-Cycle Options > System Copy > Oracle > Target System Installation > Distributed System > Based on AS Java > Database Instance( Last error reported by the step: Process call '/oracle/DEP/112/bin/srvctl add database -d DEP -o /oracle/DEP/112 -p +DEVDEP01/DEP/spfileDEP.ora -a DEVDEP01' exits with error code 2. For details see log file(s) srvctl.log.)
[oracle@sapdtdb01 DB]$ cat srvctl.log
/oracle/DEP/112/bin/srvctl: line 87: dirname: No such file or directory
/oracle/DEP/112/bin/srvctl: line 94: dirname: No such file or directory
/oracle/DEP/112/bin/srvctl: line 148: uname: No such file or directory
PRCD-1025 : Failed to create database DEP
PRCT-1011 : Failed to run "srvctl". Detailed error: [/oracle/DEP/112/bin/srvctl: line 87: dirname: No such file or directory, /oracle/DEP/112/bin/srvctl: line 94: dirname: No such file or directory, /oracle/DEP/112/bin/srvctl: line 148: uname: No such file or directory]
Manualy I can execute and register the db:
/oracle/DEP/112/bin/srvctl add database -d DEP -o /oracle/DEP/112 -p +DEVDEP01/DEP/spfileDEP.ora -a DEVDEP01
I updated de .bash_profile and .bashrc
PATH=$PATH:$HOME/bin:/oracle/DEP/112/bin
ORACLE_HOME=/oracle/DEP/112
ORACLE_SID=DEP
ORACLE_BASE=/oracle/DEP
GRID_HOME=/crs/product/11.2.0.3/
LD_LIBRARY_PATH=/oracle/DEP/112/lib
export PATH
export ORACLE_HOME
export ORACLE_SID
export ORACLE_BASE
export LD_LIBRARY_PATH
Can you please advise?
Best regards
António -
How to change of NAME and IP after RAC installation.
Hi Friends,
I have a challenge here...Would appreciate if anyone can help me..
I have to install 10.2.0.3 Oracle RAC on windows 2003 server 64 bit.
My issue is now the server names and ips are set and I am going to install the RAC.
But the client need is that after one month, they need to change the names and ips of the servers (a one time change).
Because according to their server naming standards, current production servers are having the acceptable names and ips.
The installation was on a 32 bit OS, so they are facing out of process memory errors. Thats why they are going to 64 bit OS on new servers.
After the new servers are ready, the data will be migrated to new server. After a month, they need to change the names of new servers to that of the old (current production) servers.
Could anybody help me by giving me information about how to change the NAME and IP after a RAC installation ?
Any metalink notes or commands as it is........
Thank you,
Mahesh.Hi,
You can change the IP later but you can not change the hostname of the system.
You have to install CRS freah if you want to change the hostname of the system.
Please let us know which IP you want to change.
You can see the metalink Note.276434.1 for VIP or VIP hostname change.
Regards,
KK -
Not valid month Error Ora 01843
hi
This is an error while running a report 6i. in Oracle 8i Environment.
"Not valid month Error Ora 01843"
This report is working fine in Production. But it is not working in Development Database.
Development database is the image of Production system.
Any reason for this Error?Dear Naseer C ,
We got similar experiences for several time.
We quried like that.
Selet moth from table;
08-AUG-1988
08-08-1988
08-08-88
We changed several time until diappear the message.
Hopefully, it will help you.
Best regards,
S!G -
Photoshop 13.1.2 for Creative Cloud
Installation failed. Error Code: U44M1P7What is the current version of Ps (Help->System Info), if you have 13.0.1.2 already applied then you need to re-install Ps to get Ps 13.1.2.
As 13.1.2 is a subscription patch this would not get applied over 13.0.1.2.
If this still does not resolves your issue, Kindly mail me installer logs.
For Mac:
"Library/Logs/Adobe",
For Win:
Program Fies(x86)\Common Files\Adobe\Installers
Please mail me @ [email protected]
Regards,
Ashutosh
Maybe you are looking for
-
Process: iPhoto [845] Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto Identifier: com.apple.iPhoto Version: 9.4.1 (9.4.1) Build Info: iPhotoProject-701067000000000~10 App Item ID: 408981381 App External I
-
Dear Experts, One of mine DEV server is running out of space in the SAP drive ( D: ) ECC 6.0 and SQL SERVER 2005 Total size Allocated : 270 GB SIDData1 : 24 GB SIDData2 : 23 GB SIDData3 : 24 GB SIDLOG1 : 170 GB Now the message showing in Low Disk Sp
-
How to remove the window border in SAP Script
Hi, In my requirement when I create any window in SAP Script, in the output the border around the window should not be displayed. Request to suggest how to proceed on this. Thanks, Naresh
-
How to install Just the 64bit Version?
I got 32GB of RAM and WIN 7 64bit ENT ED. so why would I want to waist my HDD space with a 32bit version. I only use 32bit if its only available in 32bit. Some advanced options would be nice in the Application Manager
-
Please help with web services (JSR 172)
Hello! I'm in need of some help. I've only worked with web services some few weeks. I have two web services that I want to access from J2ME. Both works nice in regular Java (J2SE). I use axis so with the help of WSDL2Java I got a working client. One