RAC Installation

hi
i m trying to install 9i RAC on windows 2000....installation guide realy doesnt work....according to installation guide i created logical drives on my single hard disk and down loaded CLUSTER FILE SYSTEM pack from oracle website.....next step is to run CLUSTERSETUP.EXE file in preinstall_rac\clustersetup\folders but it returns me error when i click NEXT on second screen(Create Cluster) and error message is "Unable to find an oracle disk partition. Please exit from the wizard, create Oracle partitions and try again"
can some one tell me all steps briefly??? for example what would i do firt and what afterwards etc....
do i need to run something on all node before starting any installation??? if yes then how? and do i need to create raw unformated logical drives after performing any specific configuring other nods in RAC...kindly tell me all steps...may i have a single hard drive whos one partition is NTFS and on the same physical hard drive i can create extended and then logical p[artition?
Best Regards

you dont wrote about tasks of your rac installation.
if you need oas cluster there is a next problem: you cannt use network load balancer because nlb is not comppatible with mscs.
but i dont know about problems with database cluster.
im used such configuration last year.
Now i have the rac10g/db10g/ofs/mscs configuration.
wbr

Similar Messages

10g RAC installation fails....

Hello All,
I am new to RAC installation.while doing the installation in 2node cluster,till the configuration assisstants windows everything went fine. in CA while checking the status,the oracle clusterware config assistant failed with the following log....
INFO: Starting Install on nodes 'server004'
INFO: Saving Cluster Inventory
INFO: Running command 'C:\DOCUME~1\uit0076\LOCALS~1\Temp\1\OraInstall2010-05-18_11-41-42AM\oui\bin\setup.exe -jreLoc C:\DOCUME~1\uit0076\LOCALS~1\Temp\1\OraInstall2010-05-18_11-41-42AM\jre\1.4.2 -paramFile C:\DOCUME~1\uit0076\LOCALS~1\Temp\1\OraInstall2010-05-18_11-41-42AM\oui/clusterparam.ini -silent -ignoreSysPrereqs -attachHome -noClusterEnabled ORACLE_HOME=C:\oracle\product\10.2.0\crs ORACLE_HOME_NAME=OraCr10g_home CLUSTER_NODES=server003,server004 CRS=true "INVENTORY_LOCATION=C:\Program Files\Oracle\Inventory" LOCAL_NODE=server004 -remoteInvocation -invokingNodeName server003 -logFilePath "C:\Program Files\Oracle\Inventory/logs" -timestamp 2010-05-18_11-41-42AM' on the nodes 'server004'.
INFO: Deleting service 'OracleOUIOraCr10g_homeService' on nodes 'server004'.
INFO: Creating service 'OracleOUIOraCr10g_homeService' on nodes 'server004'.
INFO: Starting service 'OracleOUIOraCr10g_homeService' on nodes 'server004'.
INFO: Stopping service OracleOUIOraCr10g_homeService on nodes server004.
INFO: Deleting service 'OracleOUIOraCr10g_homeService' on nodes 'server004'.
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: RUN_RECOMMENDED_TOOLS FIRST is set to false
INFO: No of Recommended Tools5
INFO: plugin-list is created
INFO: pluginlist is updated for: Oracle Clusterware current size: 1
INFO: No of ExitOnly Tools in this session: 0
INFO: cf session for perform has hashcode: 1040982
INFO: detached tool list getting prepared fo comp: Oracle Clusterware
INFO: cfsession hashcode for exit only tools: 1040982
INFO: hashcode for action: 17596838
INFO: No of ExitOnly Tools: 0
INFO: saving exit only tools ...
INFO: no detached only tools in this session
INFO: exit-only tools are created in single installation
INFO: no. of sets of tools to be run: 1
INFO: ca page to be shown: true
INFO: exitonly tools to be excuted passed: 0
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/install/crssetup.config.bat
Step 1: checking status of CRS cluster
Step 2: creating directories (C:\oracle\product\10.2.0\crs)
Step 3: configuring OCR repository
ocr upgrade failed with (-1073741819)
Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/install/crssetup.config.bat has failed
INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\crs
Configuration directory is set to C:\oracle\product\10.2.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
Have 1GB RAM in both the nodes.
could any one help me to solve this?
Thanks,
Derick
Edited by: user4487322 on May 18, 2010 1:46 AM

Thank you madrid.I am installing the RAC in windows2003 sp2 server.in the link till the step no#12(12. The Configuration Assistants page appears.)everything went
fine.while checking the 'Virtual Private IP Configuration Assistant',the installation fails with following error.....
INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" succeeded
INFO: Command = C:\oracle\product\10.2.0\crs/bin/racgons.exe add_config server003:6200 server004:6200
INFO: Configuration assistant "Oracle Notification Server Configuration Assistant" succeeded
INFO: Command = C:\oracle\product\10.2.0\crs/bin/oifcfg.exe setif -global "Local Area Connection"/10.28.25.0:public "Local Area Connection 2"/10.10.10.0:cluster_interconnect
INFO: Configuration assistant "Oracle Private Interconnect Configuration Assistant" succeeded
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/bin/vipca.bat -silent -nodelist "server003,server004" -nodevips "server003/vipserver003/255.255.255.0/Local Area Connection,server004/vipserver004/255.255.255.0/Local Area Connection"
Execution of the plugin was aborted
INFO: Configuration assistant "Virtual Private IP Configuration Assistant" was canceled.
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\crs
Configuration directory is set to C:\oracle\product\10.2.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/bin/vipca.bat -silent -nodelist "server003,server004" -nodevips "server003/vipserver003/255.255.255.0/Local Area Connection,server004/vipserver004/255.255.255.0/Local Area Connection"
Execution of the plugin was aborted
INFO: Configuration assistant "Virtual Private IP Configuration Assistant" was canceled.
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/bin/vipca.bat -silent -nodelist "server003,server004" -nodevips "server003/vipserver003/255.255.255.0/Local Area Connection,server004/vipserver004/255.255.255.0/Local Area Connection"
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\crs
Configuration directory is set to C:\oracle\product\10.2.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
I am able tp ping all my IP's from both the nodes,with host name &alias specified in the host file.
any thing else to be checked to fix "Virtual Private IP Configuration Assistant"?Any help?

Oracle 11g R2 RAC installation on AIX

hi,
I wana setup Oracle 11g R2 RAC on Ibm with AIX. Is there any good document or cookbook explaining step by step procedure for the installation...I'll be thankful
thanx

Hi;
Please check below links which is mention about 11gR2 Rac installation on AIX
11gR2 RAC installation in AIX help urgent
Re: 11gR2 RAC installation in AIX help urgent...!!!!
11gR2 RAC Installation Manual (with ASM+Rawdevice)
http://www.goodus.com/knowledge_pds/%EA%B8%B0%EC%88%A0%EB%85%B8%ED%8A%B8_11gR2_RAC_Guide.pdf
Regard
Helios

Oracle 11gR2 RAC installation with DNS

Dear Guru's,
I want to configure RAC on two node cluster with DNS(For SCAN) in my testing server.
O.S: RHEL5.4(64 bit)
Oracle Version: 11gR2(11.2.0.2)
Note: Am creating nodes in VMware ESXi server.
Just I want to know whether DNS should be configure in any one of those NODES or in separate machine.
Bala :)

Hi Bala,
I want to configure my Database with & without DNS. (Will try both installation in different servers)I think, you have already received a link on very good article about Oracle RAC installation without DNS and DHCP (I mean Jeffrey Hunter's article).
There is one more about Oracle RAC installation with DNS and DHCP (http://gjilevski.com/2011/10/05/build-two-node-oracle-rac-11gr2-11-2-0-3-with-gns-dns-dhcp-and-haip/).
And want to know how it forwards the client connection if a node fails.. Can anyone update the URL for this..There are a lot of information about it:
- http://www.oracle.com/technetwork/database/features/oci/taf-10-133239.pdf
- http://docs.oracle.com/cd/E14072_01/java.112/e10589/apxracfan.htm
- http://www.oracle.com/technetwork/database/app-failover-oracle-database-11g-173323.pdf
Very good videos:
- http://www.dsvolk.ru/oracle/racdd4d/demos/video/taf/session/session_viewlet_swf.html
- http://www.dsvolk.ru/oracle/racdd4d/demos/video/taf/select/select_viewlet_swf.html
- http://www.dsvolk.ru/oracle/racdd4d/demos/video/taf/callback/callback_viewlet_swf.html
- http://www.dsvolk.ru/oracle/racdd4d/demos/video/fan/fan_viewlet_swf.html
Hope it helps,
Best regards,
Gena

Oracle 11gr2 RAC installation

Hi Gurus,
In new project we have proposed to have 2 nodes single site RAC database Oracle 11gR2 64 Bit . We are going to have OEL 5.4 64 Bit Linux as OS and IBM as machine .
We are migrating standalone 10g R2 database to 11r2 Rac and from HP-UX to OEL Linux . We are migrating from different datacenter .
What would be the pfile configuration (i mean memory size doubles ) in RAC ?
We are going to use IBM storage . Need light on followings . Pls help me out
1>Requirements for installation
2>Grid installation requirements
3>ASM instance is physical database instance or just service ?
4>Any oracle document for installation of 11gR2 Grid and RAC?
If you provide me authorized links of RAC installation that would be better .
Thanks & Regards

1>Requirements for installation
Resp.: http://www.oracle.com/pls/db112/to_toc?pathname=install.112/e10840/toc.htm
2>Grid installation requirements
Resp.: http://www.oracle.com/pls/db112/to_toc?pathname=install.112/e10812/toc.htm
3>ASM instance is physical database instance or just service ?
Resp.: ASM is a database instance (i.e. just the memory structures, no physical files). See this link:
4>Any oracle document for installation of 11gR2 Grid and RAC?
Resp.: http://www.oracle.com/pls/db112/to_toc?pathname=install.112/e10813/toc.htm (RAC), the GI is in item 2 above.
Always check the documentation site 1st: http://www.oracle.com/pls/db112/homepage

Oracle RAC installation failover

Hi,
I have an Oracle RAC installation with 2 nodes with the data stored on a shared OCFS partition. I had a client test the connection using jdbc string for RAC failover. I tried shutting down one of the nodes on the RAC installation and the client could not connect to the oracle cluster database for the next 5 to 10mins.
I understand that the client would failover to the next available listener (On the next retry connection) if the node it is currently listening to has failed. Is there any configuration i should make to increase the failover efficiency?
Thanks for any advice.

Hi,
Server side failover is arranged by setting the remote_listener parameter.
Client side failover is set by using T(ransparent) A(pplication) F(ailover) (9i and higher)
or F(ast)C(onnection)F(ailover). Both are documented in the Net administrators manual for the version you didn't care to mention.
As far as I know, both TAF and FCF are not supported by the JDBC thin driver.
Sybrand Bakker
Senior Oracle DBA

Oracle 11g RAC installation on windows 2008 64 bit

Hello Everyone,
can i get some details regarding Oracle 11g RAC installation on windows 2008,
minimum Hardware Requirement
Will windows support ASM
Can i get a documentation regarding the RAC installation on windows. we were planning to have 11.5 on windows 2008.
please send me some docs regarding os requirements, installation and ASM details.
Thank you

Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC , Clusterware 11g R2 64 Bit.

Best practice of 11G release 2 Grid & RAC installation on Solaris 10

Hi Experts,
Please share 11g Release 2 Grid infrastructure and RAC installation experiennce on Sun SPARC.
Appreciate if you can provide documentation which provde complete information from server setup to database setup(other than oracle documentaion)
Also please let me know which is the best storage option( NFS , ASM,...) and pros and cons
Regards,
Rasin M

Hi,
Appreciate if you can provide documentation which provde complete information from server setup to database setup(other than oracle documentaion)Check this in MOS:
RAC Assurance Support Team: RAC Starter Kit and Best Practices (Solaris)
https://support.oracle.com/CSP/main/article?cmd=show&id=811280.1&type=NOT
Regards,
Levi Pereira
http://levipereira.wordpress.com

Consultancy Services for RAC installation and Internet Security Audit

Dear All,
"Warm greetings from Venkatesh"
We are proud to announce that, we have started a leading Database, Networking and Internet security Consulting organization at PUNE with a global presence through which we offers a focused, Excellence Solutions for Database, Networking and internet security for vulnerabilities and ethical hacking to the organizations to achieve a sustainable performance and results, and to contribute to the delivery of Quality Product, Solutions and Services to transform the human lives every day.
We offer a customized Consulting and Corporate Training Services at competitive sizes of organization in all major verticals for Performance Excellence as under with six months maintenance support after RAC installation
Design and Implementation of Oracle RAC (Real Application Cluster)
- Oracle solution for High Availability & Grid Computing
- Versions: Oracle 10gR2, 11gR1 & 11gR2
- Operating System: Linux, Windows, Solaris, AIX
- Storage: ASM, OCFS2
- ASM Cluster File System (ACFS) in Oracle 11gR2
- Building RAC setup in VMware Environment
- Feature: Load Balancing, Failover, Dynamic addition of Nodes to Grid
Design and Implementation of Oracle Data Guard
- Oracle solution for Disaster Management
- Primary & Secondary Sites
- Logical & Physical Standby Database
Internet Security Audit for Vulnerabilities and Ethical Hacking
- Penetration testing
- Source code audit
- Information security training
- Website design and development
- Data Centre audit
- ISO 27701 consultancy
We also offer Corporate Trainings for
- Oracle RAC Administration
- Automatic Storage Management (ASM)
- Data Guard
Please feel free to revert back for any queries.
Regards
Venkatesh
mail: [email protected]
Edited by: vjpune on Apr 17, 2010 4:44 AM

Hi! keyur,
Greetings from venkatesh
Sorry for delay, i was busy with some assignments.
Actually, we are consultancy service provider for those organization who needs to Install Oracle RAC server. We provide entire services i.e. from designing to implementation of RAC server, provide solution for load balancing, desaster management and so on.. what i had mention in the earlier post.
Also we offer corporate training to the organization in RAC administration, ASM, Data Guard.
I think this info will get you to understand our services..
we welcome inquires if any from your end.
Regards
Venkatesh
mail: [email protected]

Steps For Oracle10gR2 RAC installation on windows 2003 enteprise edition

can any one tell me what are the steps for oracle 10gR2 installation on windows 2003 enterprise edition. i would like to know two-node RAC setup with SAN

Hi,
Were you able you do the 11gr1 RAC installation on Windows 2008? I am struck with configuring Storage as onfigure Shared Storage windows does not show any disks. Also runcluvfy fails with below error.
Check: System architecture
Node Name Available Required Comment
rac11 unknown 32-bit failed
rac22 unknown 32-bit failed
Result: System architecture check failed.
Can anyone throw more light to resolve this issue.
Note that i have successfully does this on Windows 2003.
Any help will be highly appreciable.
Thanks
Nilanjan

10gR2 SE RAC installation on Windows 2003

Hello,
I want to install RAC on two nodes with Windows 2003 operating system.
I have the following questions:
Do I need Windows Clustering Software installed before I go for RAC clusterware installation?
If not, how do I setup shared drive so that both systems can see and access OCR and voting disks?
Is there any good documentation for RAC installation on Windows platform?
Thanks
J

Hi,
Do I need Windows Clustering Software installed before I go for RAC clusterware installation? No, you dont need any Windows clustering software for implement Oracle RAC.
If not, how do I setup shared drive so that both systems can see and access OCR and voting disks?You need install the clusterware pre-requisites before install the Oracle Clusterware, you must see the next documentation. There explain how configure the shared disk and other pre-requisites for Clusterware, for example raw devices and other settings.
http://download.oracle.com/docs/cd/B19306_01/install.102/b14207/storage.htm#sthref244
Is there any good documentation for RAC installation on Windows platform?Yea, there is a good documentation for RAC Installation on Windows, look the next URL for more information.
http://download.oracle.com/docs/cd/B19306_01/install.102/b14207/toc.htm
Luck.
Have a good day.
Regards.

Problems with RAC installation with Windows 2000 Advanced Server

Hello,
I've two servers in cluster mode with W2K Advanced Server, and a RAID-5 array of 4 disks shared by both of them. My problem is that I've installed The Cluster Service of Windows in order to have an active/passive configuration of my servers, because I have a common directory structure that is accessed by the PC's of the LAN.
By another hand, I want to install Oracle Real Application Cluster to manage my Oracle database but after create the extended partition and the logical drives when I execute the file \preinstallation_rac\clustersetup\clustersetup.exe to create the cluster, when I select the option Create a cluster the following error message appears me:
"Any disk Oracle partition has been found. Stop this wizard, create an Oracle partition and try it
again."
I'd like to know if it's possible to have the Service Cluster of Windows 2k and the Oracle clusterware?¿ Altough before begining the installation I've stopped my Cluster Service as documentation suggests. If somebody knows what it's happening to me I'd be really very grateful.
Thanks in advance,
Isabel

Hello Joel,
I've already read all documentation provided by Oracle about Real Application Clusters
and I've not found anything to solve my problem. Certainly I want to use OCFS but when I
try to execute preinstall_rac\clustersetup.exe to install CFS the error appear and I can't
continue with RAC installation.
Besides I've tried command "lsnodes -v" and got :
Could not load CM.dll
Could not initialize cluster
And when I've tried to run "clustercheck" I've got :
** Copy File: Create Directory failed - Error 183
** Directory = \\192.168.1.111\Cy$\Temp\opsm
Created directory \\192.168.1.112\Cy$\Temp\opsm
Could not copy file to other nodes [error = 183]
I've read metalink Note 186130.1 Clustercheck Fails with Windows Error 183 and the only
proof I haven't done is get the clustercheck.exe release1(9.0.1).
Any suggestion will be very appreciated.Thanks,
Isabel

OUI does not detect RAC installation while installing 10.2.0.3

Hello all,
I have a 2 node rac on 10.2.0.2 on Solaris 10.
The other day when i tried to upgrade them to 10.2.0.3, the installer was not detecting
installation as a RAC(the cluster nodes were not shown), but as single installation. Even 'opatch lsinventory' didnt show the rac details which it was supposed to show in a RAC. So i have left my CRS with 10.2.0.3 and RDBMS as 10.2.0.2.. Seems like inventory got screwed, but not sure.
I am not sure how this installation was done.
A friend of mine said that there could be another means of installing RAC other than letting the OUI itself to copy the files to the node2 while installation and that is why it doesn't show the RAC details.
Is it possible to have Oracle Single instances on 2 machines to act as a rac by doing some changes?
Could someone let me know the different methods of setting up RAC (other than the default method of letting the OUI to do the part.) ?
Will there be some problem if i proceed installing 10.2.0.3 even if the OUI does not identify it as a rac installation?
TIA,
JJ

Hi,
myuolicdbd01 [SHCL1N01]$ ./opatch lsinventory -oh $ORA_CRS_HOME
Invoking OPatch 10.2.0.2.0
Oracle interim Patch Installer version 10.2.0.2.0
Copyright (c) 2005, Oracle Corporation. All rights reserved..
Oracle Home       : /u01/app/oracle/product/crs
Central Inventory : /u01/app/oracle/oraInventory
   from           : /u01/app/oracle/product/crs/oraInst.loc
OPatch version    : 10.2.0.2.0
OUI version       : 10.2.0.3.0
OUI location      : /u01/app/oracle/product/crs/oui
Log file location : /u01/app/oracle/product/crs/cfgtoollogs/opatch/opatch-2007_Dec_04_15-33-47-JST_Tue.log
Lsinventory Output file location : /u01/app/oracle/product/crs/cfgtoollogs/opatch/lsinv/lsinventory-2007_Dec_04_15-33-47-JST_Tue.txt
Installed Top-level Products (2):
Oracle Clusterware                                                   10.2.0.1.0
Oracle Database 10g Release 2 Patch Set 2                            10.2.0.3.0
There are 2 products installed in this Oracle Home.
There are no Interim patches installed in this Oracle Home.
Rac system comprising of multiple nodes
Local node = myuolicdbd01
Remote node = myuolicdbd02
OPatch succeeded.
myuolicdbd01 [SHCL1N01]$The below is for the RDBMS home and it does not show the node list.
myuolicdbd01 [SHCL1N01]$ ./opatch lsinventory -oh $ORACLE_HOME
Invoking OPatch 10.2.0.2.0
Oracle interim Patch Installer version 10.2.0.2.0
Copyright (c) 2005, Oracle Corporation. All rights reserved..
Oracle Home       : /u01/app/oracle/product/10.2.0/db_1
Central Inventory : /u01/app/oracle/oraInventory
   from           : /u01/app/oracle/product/10.2.0/db_1/oraInst.loc
OPatch version    : 10.2.0.2.0
OUI version       : 10.2.0.2.0
OUI location      : /u01/app/oracle/product/10.2.0/db_1/oui
Log file location : /u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/opatch/opatch-2007_Dec_04_15-34-22-JST_Tue.log
Lsinventory Output file location : /u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/opatch/lsinv/lsinventory-2007_Dec_04_15-34-22-JST_Tue.txt
Installed Top-level Products (2):
Oracle Database 10g                                                  10.2.0.1.0
Oracle Database 10g Release 2 Patch Set 1                            10.2.0.2.0
There are 2 products installed in this Oracle Home.
Interim patches (2) :
Patch 5490848      : applied on Thu Nov 16 01:26:37 JST 2006
   Created on 5 Oct 2006, 10:16:33 hrs US/Eastern
   Bugs fixed:
     5407466, 5092134, 4925103, 5099995, 5079037, 5242650, 5079038, 4604970
     4763768, 4523125, 5225799, 5490937, 5490848, 4669305
Patch 5117016      : applied on Wed Jul 19 19:48:22 JST 2006
   Created on 30 Mar 2006, 12:52:17 hrs US/Pacific
   Bugs fixed:
     5117016
OPatch succeeded.
myuolicdbd01 [SHCL1N01]$Details of the Cluster Verification Utility
==============================
myjpsuolicdbd01 [SHCL1N01]$ cluvfy stage -post crsinst -n myuolicdbd01,myuolicdbd02
Performing post-checks for cluster services setup
Checking node reachability...
Node reachability check passed from node "myuolicdbd01".
Checking user equivalence...
User equivalence check passed for user "oraprd".
Checking Cluster manager integrity...
Checking CSS daemon...
Daemon status check passed for "CSS daemon".
Cluster manager integrity check passed.
Checking cluster integrity...
Cluster integrity check passed
Checking OCR integrity...
Checking the absence of a non-clustered configuration...
All nodes free of non-clustered, local-only configurations.
Uniqueness check for OCR device passed.
Checking the version of OCR...
OCR of correct Version "2" exists.
Checking data integrity of OCR...
Data integrity check for OCR passed.
OCR integrity check passed.
Checking CRS integrity...
Checking daemon liveness...
Liveness check passed for "CRS daemon".
Checking daemon liveness...
Liveness check passed for "CSS daemon".
Checking daemon liveness...
Liveness check passed for "EVM daemon".
Checking CRS health...
CRS health check passed.
CRS integrity check passed.
Checking node application existence...
Checking existence of VIP node application (required)
Check passed.
Checking existence of ONS node application (optional)
Check passed.
Checking existence of GSD node application (optional)
Check passed.
Post-check for cluster services setup was successful.TIA,
J J

CRS-0213 error during 10g RAC installation

The two nodes are 2 Sun machines. The Oracle CRS installation went smoothly without incidents. I then kicked in the 10g DB RAC installation. At the end of the installation, I got error. I took a snapshot here:
http://bostonfx.com/temp/ora10g.gif
Any advise is much appreciated,
Lucas

Hi Lucas -
This sounds simliar to Bug 3584146 PRKR-1008 adding instance to CRS via SRVCTL. The published workaround follows:
The workaround is to give permissions on the vip resources for all oracle users on the machine.
crs_setperm ora.<nodename>.vip -u user:<orauser1>:rwx
crs_setperm ora.<nodename>.vip -u user:<orauser2>:rwx
Repeat this for all oracle users on the system.
Hope this helps
-shawn

Oracle 9.2 RAC installation error on raw devices

During Oracle 9.2 RAC installation on Linux Red Hat 7.3 on raw devices
Database Configuration Assistant
returned the error message:
"Raw device validation check for Data File
"/dev/raw/clustdb_raw_cwmlite_100m" failed, No such file or directory".
Really this file exists, this is a link to a raw device.
How does Oracle validate the raw file?
What does this error mean?
Igor.

During Oracle 9.2 RAC installation on Linux Red Hat 7.3 on raw devices
Database Configuration Assistant
returned the error message:
"Raw device validation check for Data File
"/dev/raw/clustdb_raw_cwmlite_100m" failed, No such file or directory".
Really this file exists, this is a link to a raw device.OK, so you are saying that /dev/raw/clustdb_raw_cwmlite_100m is link to /dev/raw/raw<x> (x some number)??
If not - there is your error.
How does Oracle validate the raw file?File MUST exists (or link) AND it must be a RAW device.
You can check it by raw -qa (it should display all raw devices, with theirs major-minor pairs)
What does this error mean?
Igor. Hrvoje

RAC Installation

Similar Messages

Maybe you are looking for