RAC Node Addition fails with - " VIP is already in use "
We had a two-node RAC on oracle 10gR2 with ASM. We removed the second node and now trying to add it back as the second node again.
CRS and ASM got extended on to the second node but when trying to add the Db home, it gives an error in the oui :
"Unable to connect to the second node, when clicked ok is shows as VIP for node <NODENAME> is already in use"
CRS is running fine on both the nodes and VIP for both the nodes is shown in CRS_STAT.
Has anyone seen this error message earlier?
Edited by: user539083 on Dec 5, 2008 11:31 AM
See here...
The Backup disk image ... sparsebundle ... is already in use.
From Pondini’s excellent Information Here...
http://pondini.org/TM/Troubleshooting.htm
Similar Messages
-
F *** ERROR = Node 'bootstrap' failed with exit code 503.
Hi,
i installed the sap nw 7.2 trial version succesfully and due to sapgui problem i downloaded a new sapgui 720 patches from the service place and installed and when installation ,i installed jre for the sapgui. after that when i start the sap server the jstart.exe is not started it is stopped. and showing the errror message
F *** ERROR => Node 'bootstrap' failed with exit code 503.
dev_jstart
trc file: "dev_jstart.3508", trc level: 1, release: "720"
trc file: "dev_jstart.new", trc level: 1, release: "720"
sysno 00
sid CE1
systemid 560 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 22
intno 20020600
make multithreaded, Unicode, optimized
profile D:\usr\sap\CE1\SYS\profile\CE1_J00_boedge
pid 3508
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS All, egi
Sat May 22 10:55:11 2010
trace logging activated, max size = 52428800 bytes, 2 versions
arguments :
arg[ 0] : D:\usr\sap\CE1\SYS\exe\uc\NTI386\jstart.EXE
arg[ 1] : pf=D:\usr\sap\CE1\SYS\profile\CE1_J00_boedge
F
F Sat May 22 10:55:11 2010
F ********************************************************************************
F Java environment properties (D:\usr\sap\CE1\J00\work\jstart.jvm)
F root directory : D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007/sapjvm_6
F vendor : SAP AG
F version : 1.6.0_07
F cpu : x86
F java vm type : server
F java vm version : 6.1.007
F jvm library name : jvm.dll
F library path : D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin\server;D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin
F executable path : D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin
F ********************************************************************************
F SAP extensions : available
F ********************************************************************************
I [Thr 3512] MtxInit: 30002 0 2
trc file: "dev_jstart", trc level: 1, release: "720"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS All, egi
F [Thr 3512] *** LOG => connected to Enqueue Server.
F [Thr 3512] *** LOG => connected to Message Server.
F [Thr 3512] *** LOG => Starting run level 1.
F ********************************************************************************
F Java process [deployment] properties:
F section name : deployment
F config file : D:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F node name : Deploy_offline
F home directory : D:\usr\sap\CE1\J00\j2ee\cluster
F shutdown timeout : 136000 ms
F exit timeout : 7000 ms
F debuggable : false
F debugger active : false
F ********************************************************************************
F [Thr 3512] *** LOG => Instance state is "Deploying offline components" (STARTING @ 0, INACTIVE).
F [Thr 3512] *** LOG => Starting nodes: runlevel 1.
F ********************************************************************************
F Starting process: D:\usr\sap\CE1\SYS\exe\uc\NTI386\jstart.EXE
F arg[ 1] = -nodeId=0
F arg[ 2] = pf=D:\usr\sap\CE1\SYS\profile\CE1_J00_boedge
F arg[ 3] = -hostvm
F arg[ 4] = -nodeName=deployment
F arg[ 5] = -file=D:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F arg[ 6] = -jvmFile=D:\usr\sap\CE1\J00\work\jstart.jvm
F arg[ 7] = -traceFile=D:\usr\sap\CE1\J00\work\dev_deployment
F arg[ 8] = -javaOutFile=D:\usr\sap\CE1\J00\work\jvm_deployment.out
F env : JStart/ReserveSize=0x60000000
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin;D:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
F libPath : PATH=D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin\server;D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin;D:\usr\sap\CE1\J00\j2ee\os_libs;D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin;D:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
F stdout : D:\usr\sap\CE1\J00\work\std_deployment.out
F stderr : D:\usr\sap\CE1\J00\work\std_deployment.out
F console : no
F debugger: no
F nice : yes
F ********************************************************************************
F Process Deploy_offline started with pid 3648
F ********************************************************************************
F [Thr 3512] *** LOG => Process deployment started (pid 3648).
F
F [Thr 3512] Sat May 22 10:55:14 2010
F [Thr 3512] *** LOG => Process deployment stopping (pid 3648).
F
F [Thr 3656] Sat May 22 10:55:14 2010
F [Thr 3656] *** LOG => Signal 13 SIGCHLD.
F [Thr 3512] *** LOG => Process deployment stopped (pid 3648).
F [Thr 3512] *** LOG => Instance state is "Deploying offline components" (STOPPING @ 0, INACTIVE).
F [Thr 3512] *** LOG => Run level 1 completed.
F [Thr 3512] *** LOG => Starting run level 2.
F
F Sat May 22 10:55:15 2010
F ********************************************************************************
F Java process [bootstrap] properties:
F section name : bootstrap
F config file : D:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F node name : Instance_bootstrap
F home directory : D:\usr\sap\CE1\J00\j2ee\cluster
F shutdown timeout : 136000 ms
F exit timeout : 7000 ms
F debuggable : false
F debugger active : false
F ********************************************************************************
F [Thr 3512] *** LOG => Instance state is "Synchronizing binaries" (STARTING @ 0, INACTIVE).
F [Thr 3512] *** LOG => Starting nodes: runlevel 2.
F ********************************************************************************
F Starting process: D:\usr\sap\CE1\SYS\exe\uc\NTI386\jstart.EXE
F arg[ 1] = -nodeId=0
F arg[ 2] = pf=D:\usr\sap\CE1\SYS\profile\CE1_J00_boedge
F arg[ 3] = -hostvm
F arg[ 4] = -nodeName=bootstrap
F arg[ 5] = -file=D:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F arg[ 6] = -jvmFile=D:\usr\sap\CE1\J00\work\jstart.jvm
F arg[ 7] = -traceFile=D:\usr\sap\CE1\J00\work\dev_bootstrap
F arg[ 8] = -javaOutFile=D:\usr\sap\CE1\J00\work\jvm_bootstrap.out
F env : JStart/ReserveSize=0x60000000
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin;D:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
F libPath : PATH=D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin\server;D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin;D:\usr\sap\CE1\J00\j2ee\os_libs;D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin;D:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
F stdout : D:\usr\sap\CE1\J00\work\std_bootstrap.out
F stderr : D:\usr\sap\CE1\J00\work\std_bootstrap.out
F console : no
F debugger: no
F nice : yes
F ********************************************************************************
F Process Instance_bootstrap started with pid 3736
F ********************************************************************************
F [Thr 3512] *** LOG => Process bootstrap started (pid 3736).
F
F [Thr 3512] Sat May 22 10:55:20 2010
F [Thr 3512] *** LOG => Process bootstrap stopping (pid 3736).
F
F [Thr 3744] Sat May 22 10:55:21 2010
F [Thr 3744] *** LOG => Signal 13 SIGCHLD.
F
F [Thr 3512] Sat May 22 10:55:21 2010
F [Thr 3512] *** LOG => Process bootstrap stopped (pid 3736).
F [Thr 3512] *** WARNING => Node bootstrap failed: result 1, exit code 503. [sfxxnode.hpp 1011]
F ********************************************************************************
F Native process [snapshot] properties:
F section name : snapshot
F config file : D:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F node name : snapshot
F home directory : D:\usr\sap\CE1\J00\work
F shutdown timeout : 122000 ms
F sf support : false
F ********************************************************************************
F ********************************************************************************
F Starting process: D:\usr\sap\CE1\SYS\exe\uc\NTI386\sapcontrol.EXE
F arg[ 1] = -prot
F arg[ 2] = PIPE
F arg[ 3] = -nr
F arg[ 4] = 00
F arg[ 5] = -function
F arg[ 6] = CreateSnapshot
F arg[ 7] = Servercrash
F arg[ 8] = postmortem?node=bootstrap&exitcode=503
F arg[ 9] = 1
F arg[10] = 10000
F arg[11] = ""
F arg[12] = ""
F arg[13] = DEFAULT
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=D:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
F libPath : PATH=D:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
F stdout : D:\usr\sap\CE1\J00\work\std_snapshot.out
F stderr : D:\usr\sap\CE1\J00\work\std_snapshot.out
F console : no
F debugger: no
F nice : yes
F ********************************************************************************
F Process snapshot started with pid 3884
F ********************************************************************************
F [Thr 3512] *** LOG => Process snapshot started (pid 3884).
F [Thr 3512] *** LOG => Process snapshot running (pid 3884).
F [Thr 3512] *** LOG => SAP Start Service (pid 1240) connected.
F [Thr 3512] *** LOG => SAP Start Service (pid 1240) disconnected.
F
F [Thr 3892] Sat May 22 10:55:29 2010
F [Thr 3892] *** LOG => Signal 13 SIGCHLD.
F
F [Thr 3512] Sat May 22 10:55:29 2010
F [Thr 3512] *** LOG => Process snapshot stopped (pid 3884).
F [Thr 3512] *** LOG => Instance state is "Synchronizing binaries" (STOPPING @ 0, INACTIVE).
F [Thr 3512] *** LOG => Run level 2 completed.
F [Thr 3512] *** LOG => Instance state is "Some processes failed" (STOPPED @ 0, INACTIVE).
I [Thr 3512] MPI: dynamic quotas disabled.
I [Thr 3512] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
F
F ********************************************************************************
F *** ERROR => Node 'bootstrap' failed with exit code 503.
F ***
F *** Please see section 'Failures in the 'synchronizing binaries' phase'
F *** in SAP Note 1316652 for additional information and trouble shooting advice.
F ********************************************************************************
F
F [Thr 3512] *** LOG => exiting (exitcode 22002, retcode 1).<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[2.0.7.1006]/>
<!NAME[C:\Documents and Settings\Administrator\.sdtgui\log\SDTServer.log]/>
<!PATTERN[SDTServer.log]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%6s]: %m)]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
May 23, 2015 10:45:07 AM [Info ]: *************************************************
May 23, 2015 10:45:07 AM [Info ]: Starting SL Controller ...
May 23, 2015 10:45:07 AM [Info ]: StorageService switched off.
May 23, 2015 10:45:07 AM [Info ]: Initializing SecurityManager ...
May 23, 2015 10:45:07 AM [Info ]: Key Store management switched off.
May 23, 2015 10:45:08 AM [Info ]: Configuring HTTPManager ...
May 23, 2015 10:45:08 AM [Info ]: WebstartService switched off.
May 23, 2015 10:45:08 AM [Info ]: RoleService switched off.
May 23, 2015 10:45:08 AM [Info ]: AlertService switched off.
May 23, 2015 10:45:08 AM [Info ]: Starting NotesService ...
May 23, 2015 10:45:08 AM [Info ]: ProcessService switched off.
May 23, 2015 10:45:08 AM [Info ]: Starting MIDService ...
May 23, 2015 10:45:08 AM [Info ]: Starting FileService ...
May 23, 2015 10:45:08 AM [Info ]: LogService switched off.
May 23, 2015 10:45:08 AM [Info ]: MailService switched off.
May 23, 2015 10:45:08 AM [Info ]: Starting services ...
May 23, 2015 10:45:08 AM [Info ]: Starting service "SAPinstService" ...
May 23, 2015 10:45:08 AM [Info ]: Service "SAPinstService" started
May 23, 2015 10:45:08 AM [Info ]: Services started.
May 23, 2015 10:45:08 AM [Info ]: Starting HTTP server listening on port 4239 ...
May 23, 2015 10:45:08 AM [Info ]: HTTP server started.
May 23, 2015 10:45:08 AM [Info ]: SL Controller started.
May 23, 2015 10:45:08 AM [Info ]: Starting GUI ...
May 23, 2015 10:45:11 AM [Info ]: GUI started.
May 23, 2015 10:46:53 AM [Info ]: *************************************************
May 23, 2015 10:46:53 AM [Info ]: Starting SL Controller ...
May 23, 2015 10:46:53 AM [Info ]: StorageService switched off.
May 23, 2015 10:46:53 AM [Info ]: Initializing SecurityManager ...
May 23, 2015 10:46:53 AM [Info ]: Key Store management switched off.
May 23, 2015 10:46:53 AM [Info ]: Configuring HTTPManager ...
May 23, 2015 10:46:53 AM [Info ]: WebstartService switched off.
May 23, 2015 10:46:53 AM [Info ]: RoleService switched off.
May 23, 2015 10:46:53 AM [Info ]: AlertService switched off.
May 23, 2015 10:46:53 AM [Info ]: Starting NotesService ...
May 23, 2015 10:46:53 AM [Info ]: ProcessService switched off.
May 23, 2015 10:46:53 AM [Info ]: Starting MIDService ...
May 23, 2015 10:46:53 AM [Info ]: Starting FileService ...
May 23, 2015 10:46:53 AM [Info ]: LogService switched off.
May 23, 2015 10:46:53 AM [Info ]: MailService switched off.
May 23, 2015 10:46:53 AM [Info ]: Starting services ...
May 23, 2015 10:46:53 AM [Info ]: Starting service "SAPinstService" ...
May 23, 2015 10:46:53 AM [Info ]: Service "SAPinstService" started
May 23, 2015 10:46:53 AM [Info ]: Services started.
May 23, 2015 10:46:53 AM [Info ]: Starting HTTP server listening on port 4239 ...
May 23, 2015 10:46:53 AM [Info ]: HTTP server started.
May 23, 2015 10:46:53 AM [Info ]: SL Controller started.
May 23, 2015 10:46:53 AM [Info ]: Starting GUI ...
May 23, 2015 10:46:56 AM [Info ]: GUI started.
May 23, 2015 10:47:19 AM [Info ]: *************************************************
May 23, 2015 10:47:19 AM [Info ]: Starting SL Controller ...
May 23, 2015 10:47:19 AM [Info ]: StorageService switched off.
May 23, 2015 10:47:19 AM [Info ]: Initializing SecurityManager ...
May 23, 2015 10:47:19 AM [Info ]: Key Store management switched off.
May 23, 2015 10:47:20 AM [Info ]: Configuring HTTPManager ...
May 23, 2015 10:47:20 AM [Info ]: WebstartService switched off.
May 23, 2015 10:47:20 AM [Info ]: RoleService switched off.
May 23, 2015 10:47:20 AM [Info ]: AlertService switched off.
May 23, 2015 10:47:20 AM [Info ]: Starting NotesService ...
May 23, 2015 10:47:20 AM [Info ]: ProcessService switched off.
May 23, 2015 10:47:20 AM [Info ]: Starting MIDService ...
May 23, 2015 10:47:20 AM [Info ]: Starting FileService ...
May 23, 2015 10:47:20 AM [Info ]: LogService switched off.
May 23, 2015 10:47:20 AM [Info ]: MailService switched off.
May 23, 2015 10:47:20 AM [Info ]: Starting services ...
May 23, 2015 10:47:20 AM [Info ]: Starting service "SAPinstService" ...
May 23, 2015 10:47:20 AM [Info ]: Service "SAPinstService" started
May 23, 2015 10:47:20 AM [Info ]: Services started.
May 23, 2015 10:47:20 AM [Info ]: Starting HTTP server listening on port 4239 ...
May 23, 2015 10:47:20 AM [Info ]: HTTP server started.
May 23, 2015 10:47:20 AM [Info ]: SL Controller started.
May 23, 2015 10:47:20 AM [Info ]: Starting GUI ...
May 23, 2015 10:47:23 AM [Info ]: GUI started.
May 23, 2015 11:27:57 AM [Info ]: Stopping services ...
May 23, 2015 11:27:57 AM [Info ]: Stopping service "SAPinstService" ...
May 23, 2015 11:27:57 AM [Info ]: Service "SAPinstService" stopped.
May 23, 2015 11:27:57 AM [Info ]: Services stopped.
May 23, 2015 11:27:57 AM [Info ]: Server shutdown by SAPinstService -
JStart.exe not started on CE7.2- Node 'bootstrap' failed with exit code 503
Hi,
I installed on SAP Composition Environment 7.2 on Windows7 32bit .
So, once i start the CE1 server from sapmmc the jstart.exe status is 'stopped'. How can i solve this issue that make me can
Thanks for any comments.
sysno 00
sid CE1
systemid 560 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 22
intno 20020600
make multithreaded, Unicode, optimized
profile C:\usr\sap\CE1\SYS\profile\CE1_J00_LN5362-288
pid 3492
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS All, egi
Sun Jun 19 15:14:34 2011
trace logging activated, max size = 52428800 bytes, 2 versions
arguments :
arg[ 0] : C:\usr\sap\CE1\SYS\exe\uc\NTI386\jstart.EXE
arg[ 1] : pf=C:\usr\sap\CE1\SYS\profile\CE1_J00_LN5362-288
F
F Sun Jun 19 15:14:35 2011
F ********************************************************************************
F Java environment properties (C:\usr\sap\CE1\J00\work\jstart.jvm)
F root directory : C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007/sapjvm_6
F vendor : SAP AG
F version : 1.6.0_07
F cpu : x86
F java vm type : server
F java vm version : 6.1.007
F jvm library name : jvm.dll
F library path : C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin\server;C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin
F executable path : C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin
F ********************************************************************************
F SAP extensions : available
F ********************************************************************************
I [Thr 996] MtxInit: 30002 0 2
trc file: "dev_jstart", trc level: 1, release: "720"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS All, egi
F [Thr 996] *** LOG => connected to Enqueue Server.
F
F [Thr 996] Sun Jun 19 15:14:48 2011
F [Thr 996] *** LOG => connected to Message Server.
F [Thr 996] *** LOG => Starting run level 1.
F ********************************************************************************
F Java process [deployment] properties:
F section name : deployment
F config file : C:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F node name : Deploy_offline
F home directory : C:\usr\sap\CE1\J00\j2ee\cluster
F shutdown timeout : 136000 ms
F exit timeout : 7000 ms
F debuggable : false
F debugger active : false
F ********************************************************************************
F [Thr 996] *** LOG => Instance state is "Deploying offline components" (STARTING @ 0, INACTIVE).
F [Thr 996] *** LOG => Starting nodes: runlevel 1.
F ********************************************************************************
F Starting process: C:\usr\sap\CE1\SYS\exe\uc\NTI386\jstart.EXE
F arg[ 1] = -nodeId=0
F arg[ 2] = pf=C:\usr\sap\CE1\SYS\profile\CE1_J00_LN5362-288
F arg[ 3] = -hostvm
F arg[ 4] = -nodeName=deployment
F arg[ 5] = -file=C:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F arg[ 6] = -jvmFile=C:\usr\sap\CE1\J00\work\jstart.jvm
F arg[ 7] = -traceFile=C:\usr\sap\CE1\J00\work\dev_deployment
F arg[ 8] = -javaOutFile=C:\usr\sap\CE1\J00\work\jvm_deployment.out
F env : JStart/ReserveSize=0x60000000
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin;C:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files\PC Connectivity Solution;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files\Windows Live\Shared;C:\Program Files\QuickTime\QTSystem
F libPath : PATH=C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin\server;C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin;C:\usr\sap\CE1\J00\j2ee\os_libs;C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin;C:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files\PC Connectivity Solution;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files\Windows Live\Shared;C:\Program Files\QuickTime\QTSystem
F stdout : C:\usr\sap\CE1\J00\work\std_deployment.out
F stderr : C:\usr\sap\CE1\J00\work\std_deployment.out
F console : no
F debugger: no
F nice : yes
F ********************************************************************************
F Process Deploy_offline started with pid 3768
F ********************************************************************************
F [Thr 996] *** LOG => Process deployment started (pid 3768).
F
F [Thr 996] Sun Jun 19 15:14:56 2011
F [Thr 996] *** LOG => Process deployment stopping (pid 3768).
F
F [Thr 5952] Sun Jun 19 15:14:56 2011
F [Thr 5952] *** LOG => Signal 13 SIGCHLD.
F [Thr 996] *** LOG => Process deployment stopped (pid 3768).
F [Thr 996] *** LOG => Instance state is "Deploying offline components" (STOPPING @ 0, INACTIVE).
F [Thr 996] *** LOG => Run level 1 completed.
F [Thr 996] *** LOG => Starting run level 2.
F ********************************************************************************
F Java process [bootstrap] properties:
F section name : bootstrap
F config file : C:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F node name : Instance_bootstrap
F home directory : C:\usr\sap\CE1\J00\j2ee\cluster
F shutdown timeout : 136000 ms
F exit timeout : 7000 ms
F debuggable : false
F debugger active : false
F ********************************************************************************
F [Thr 996] *** LOG => Instance state is "Synchronizing binaries" (STARTING @ 0, INACTIVE).
F [Thr 996] *** LOG => Starting nodes: runlevel 2.
F ********************************************************************************
F Starting process: C:\usr\sap\CE1\SYS\exe\uc\NTI386\jstart.EXE
F arg[ 1] = -nodeId=0
F arg[ 2] = pf=C:\usr\sap\CE1\SYS\profile\CE1_J00_LN5362-288
F arg[ 3] = -hostvm
F arg[ 4] = -nodeName=bootstrap
F arg[ 5] = -file=C:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F arg[ 6] = -jvmFile=C:\usr\sap\CE1\J00\work\jstart.jvm
F arg[ 7] = -traceFile=C:\usr\sap\CE1\J00\work\dev_bootstrap
F arg[ 8] = -javaOutFile=C:\usr\sap\CE1\J00\work\jvm_bootstrap.out
F env : JStart/ReserveSize=0x60000000
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin;C:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files\PC Connectivity Solution;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files\Windows Live\Shared;C:\Program Files\QuickTime\QTSystem
F libPath : PATH=C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin\server;C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin;C:\usr\sap\CE1\J00\j2ee\os_libs;C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin;C:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files\PC Connectivity Solution;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files\Windows Live\Shared;C:\Program Files\QuickTime\QTSystem
F stdout : C:\usr\sap\CE1\J00\work\std_bootstrap.out
F stderr : C:\usr\sap\CE1\J00\work\std_bootstrap.out
F console : no
F debugger: no
F nice : yes
F ********************************************************************************
F Process Instance_bootstrap started with pid 3776
F ********************************************************************************
F [Thr 996] *** LOG => Process bootstrap started (pid 3776).
F
F [Thr 996] Sun Jun 19 15:15:03 2011
F [Thr 996] *** LOG => Process bootstrap stopping (pid 3776).
F
F [Thr 5316] Sun Jun 19 15:15:03 2011
F [Thr 5316] *** LOG => Signal 13 SIGCHLD.
F [Thr 996] *** LOG => Process bootstrap stopped (pid 3776).
F [Thr 996] *** WARNING => Node bootstrap failed: result 1, exit code 503. [sfxxnode.hpp 1011]
F ********************************************************************************
F Native process [snapshot] properties:
F section name : snapshot
F config file : C:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F node name : snapshot
F home directory : C:\usr\sap\CE1\J00\work
F shutdown timeout : 122000 ms
F sf support : false
F ********************************************************************************
F ********************************************************************************
F Starting process: C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapcontrol.EXE
F arg[ 1] = -prot
F arg[ 2] = PIPE
F arg[ 3] = -nr
F arg[ 4] = 00
F arg[ 5] = -function
F arg[ 6] = CreateSnapshot
F arg[ 7] = Servercrash
F arg[ 8] = postmortem?node=bootstrap&exitcode=503
F arg[ 9] = 1
F arg[10] = 10000
F arg[11] = ""
F arg[12] = ""
F arg[13] = DEFAULT
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=C:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files\PC Connectivity Solution;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files\Windows Live\Shared;C:\Program Files\QuickTime\QTSystem
F libPath : PATH=C:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files\PC Connectivity Solution;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files\Windows Live\Shared;C:\Program Files\QuickTime\QTSystem
F stdout : C:\usr\sap\CE1\J00\work\std_snapshot.out
F stderr : C:\usr\sap\CE1\J00\work\std_snapshot.out
F console : no
F debugger: no
F nice : yes
F ********************************************************************************
F Process snapshot started with pid 3772
F ********************************************************************************
F [Thr 996] *** LOG => Process snapshot started (pid 3772).
F [Thr 996] *** LOG => Process snapshot running (pid 3772).
F
F [Thr 996] Sun Jun 19 15:15:05 2011
F [Thr 996] *** LOG => SAP Start Service (pid 2304) connected.
F [Thr 996] *** LOG => SAP Start Service (pid 2304) disconnected.
F
F [Thr 4340] Sun Jun 19 15:15:13 2011
F [Thr 4340] *** LOG => Signal 13 SIGCHLD.
F
F [Thr 996] Sun Jun 19 15:15:13 2011
F [Thr 996] *** LOG => Process snapshot stopped (pid 3772).
F [Thr 996] *** LOG => Instance state is "Synchronizing binaries" (STOPPING @ 0, INACTIVE).
F [Thr 996] *** LOG => Run level 2 completed.
F [Thr 996] *** LOG => Instance state is "Some processes failed" (STOPPED @ 0, INACTIVE).
I [Thr 996] MPI: dynamic quotas disabled.
I [Thr 996] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
F
F ********************************************************************************
F *** ERROR => Node 'bootstrap' failed with exit code 503.
F ***
F *** Please see section 'Failures in the 'synchronizing binaries' phase'
F *** in SAP Note 1316652 for additional information and trouble shooting advice.
F ********************************************************************************
F
F [Thr 996] *** LOG => exiting (exitcode 22002, retcode 1).
Edited by: Thongie on Jun 19, 2011 10:21 AM
Edited by: Thongie on Jun 19, 2011 10:26 AMThe lastes log
sysno 00
sid CE1
systemid 560 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 22
intno 20020600
make multithreaded, Unicode, optimized
profile C:\usr\sap\CE1\SYS\profile\CE1_J00_LN5362-288
pid 3492
F ********************************************************************************
F Process snapshot started with pid 3772
F ********************************************************************************
F [Thr 996] *** LOG => Process snapshot started (pid 3772).
F [Thr 996] *** LOG => Process snapshot running (pid 3772).
F
F [Thr 996] Sun Jun 19 15:15:05 2011
F [Thr 996] *** LOG => SAP Start Service (pid 2304) connected.
F [Thr 996] *** LOG => SAP Start Service (pid 2304) disconnected.
F
F [Thr 4340] Sun Jun 19 15:15:13 2011
F [Thr 4340] *** LOG => Signal 13 SIGCHLD.
F
F [Thr 996] Sun Jun 19 15:15:13 2011
F [Thr 996] *** LOG => Process snapshot stopped (pid 3772).
F [Thr 996] *** LOG => Instance state is "Synchronizing binaries" (STOPPING @ 0, INACTIVE).
F [Thr 996] *** LOG => Run level 2 completed.
F [Thr 996] *** LOG => Instance state is "Some processes failed" (STOPPED @ 0, INACTIVE).
I [Thr 996] MPI: dynamic quotas disabled.
I [Thr 996] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
F
F ********************************************************************************
F *** ERROR => Node 'bootstrap' failed with exit code 503.
F ***
F *** Please see section 'Failures in the 'synchronizing binaries' phase'
F *** in SAP Note 1316652 for additional information and trouble shooting advice.
F ********************************************************************************
F
F [Thr 996] *** LOG => exiting (exitcode 22002, retcode 1).
Edited by: Thongie on Jun 19, 2011 10:22 AM
Edited by: Thongie on Jun 19, 2011 10:30 AM -
Hi,
When i am trying to deploy sharepoint 2010 application in VS 2010, i am getting the below error:
"Error occurred in deployment step 'Add Solution': The definition specifies a claim provider with a name already in use."
How to fix this?
Thank youYou can use:
$provider = Get-SPClaimProvider | where {$_.DisplayName -eq "Provider DisplayName"}
$mgr = Get-SPClaimProviderManager
$mgr.ClaimProviders.Remove($prov)
$mgr.Update()
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Error message: "conflicts with a path already in use"
I am trying to establish through Contribute version 2's
Connection Wizard a new connection to www.charlesfigley.com. After
I enter this web address and hit "next >" I receive the
following:
Network paths can’t overlap
The network path you have entered conflicts with a path
already in use by one of your website connections. If you need to
access this site at a higher level, edit the path of your existing
connection.
You cannot create a connection to a subfolder using this
network path.
I have checked with GoDaddy and they can find nothing on
their end to account for such a conflict. Can you help solve this
mystery? Thanks to anyone who reads this.
Thanks,
CharlesI do not know Contribute 2, but what I do know that in later
versions of the program, this message means that you have another
connection in Contribute pointing to the same webaddress.
Check this by doing the following:
1. in the main menu go to Edit>My Connections
2. check all connections there to find the path you described
3. delete or adjust this connection -
RDBMS 11.2.0.2 Install fails with VIP error
I have already successfully installed 11.2.0.2 Grid infrastructure, and have a working 10gR2 RAC database.
I am trying to install 11.2.0.2 Database binaries, but get errors during the pre-requisite checks.
Error is
PRVF-10205 : The VIPs do not all share the same subnetwork, or the VIP subnetwork does not match that of any public network interface in the clusterDetails of interfaces are as follows
/u01/app/product/11.2.0/grid/bin/oifcfg iflist -p -n
bond0 10.180.0.0 PRIVATE 255.255.0.0
bond1 10.255.255.0 PRIVATE 255.255.255.0
bond1 169.254.0.0 UNKNOWN 255.255.0.0and
/u01/app/product/11.2.0/grid/bin/oifcfg getif -global
bond1 10.255.255.0 global cluster_interconnect
bond0 10.180.201.0 global publicifconfig returns the following
bond0 Link encap:Ethernet HWaddr 00:1A:4B:DC:F8:54
inet addr:10.180.201.15 Bcast:10.180.255.255 Mask:255.255.0.0
inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
RX packets:9193348 errors:0 dropped:0 overruns:0 frame:0
TX packets:20200012 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1000409336 (954.0 MiB) TX bytes:30330339159 (28.2 GiB)
bond0:1 Link encap:Ethernet HWaddr 00:1A:4B:DC:F8:54
inet addr:10.180.201.21 Bcast:10.180.255.255 Mask:255.255.0.0
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
bond0:4 Link encap:Ethernet HWaddr 00:1A:4B:DC:F8:54
inet addr:10.180.201.115 Bcast:10.180.255.255 Mask:255.255.0.0
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
bond1 Link encap:Ethernet HWaddr 00:1A:4B:DC:C4:72
inet addr:10.255.255.15 Bcast:10.255.255.255 Mask:255.255.255.0
inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
RX packets:12504677 errors:0 dropped:0 overruns:0 frame:0
TX packets:11844935 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4286044266 (3.9 GiB) TX bytes:3697250614 (3.4 GiB)
bond1:1 Link encap:Ethernet HWaddr 00:1A:4B:DC:C4:72
inet addr:169.254.136.7 Bcast:169.254.255.255 Mask:255.255.0.0
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
eth0 Link encap:Ethernet HWaddr 00:1A:4B:DC:F8:54
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
RX packets:7795753 errors:0 dropped:0 overruns:0 frame:0
TX packets:20200012 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:842020036 (803.0 MiB) TX bytes:30330339159 (28.2 GiB)
Interrupt:169 Memory:f6000000-f6012100
eth1 Link encap:Ethernet HWaddr 00:1A:4B:DC:C4:72
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
RX packets:12504291 errors:0 dropped:0 overruns:0 frame:0
TX packets:11844935 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:4286019502 (3.9 GiB) TX bytes:3697250614 (3.4 GiB)
Interrupt:169 Memory:fa000000-fa012100
eth2 Link encap:Ethernet HWaddr 00:1A:4B:DC:F8:54
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
RX packets:1397595 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:158389300 (151.0 MiB) TX bytes:0 (0.0 b)
Interrupt:193
eth3 Link encap:Ethernet HWaddr 00:1A:4B:DC:C4:72
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
RX packets:386 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:24764 (24.1 KiB) TX bytes:0 (0.0 b)
Interrupt:169
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1478358 errors:0 dropped:0 overruns:0 frame:0
TX packets:1478358 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:391073271 (372.9 MiB) TX bytes:391073271 (372.9 MiB)What could be causing this issue?
Thanks
SkullsThanks. Yes other nodes are on same subnet.
What is confusing is that some cluvfy utility report a problem, but others dont.
For example, If I run the utility with options -pre dbinst I get the failure on node connectivity (as well as VIP failure)
./runcluvfy.sh stage -pre dbinst -n rac-node1 -verbose
Performing pre-checks for database installation
Checking node reachability...
Check: Node reachability from node rac-node1
Destination Node Reachable?
rac-node1 yes
Result: Node reachability check passed from node rac-node1
Checking user equivalence...
Check: User equivalence for user oracle
Node Name Comment
rac-node1 passed
Result: User equivalence check passed for user oracle
Checking node connectivity...
Checking hosts config file...
Node Name Status Comment
rac-node1 passed
Verification of the hosts config file successful
Interface information for node rac-node1
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
bond0 10.180.201.15 10.180.0.0 0.0.0.0 10.180.10.1 00:1A:4B:DC:F8:54 1500
bond0 10.180.201.21 10.180.0.0 0.0.0.0 10.180.10.1 00:1A:4B:DC:F8:54 1500
bond0 10.180.201.115 10.180.0.0 0.0.0.0 10.180.10.1 00:1A:4B:DC:F8:54 1500
bond1 10.255.255.15 10.255.255.0 0.0.0.0 10.180.10.1 00:1A:4B:DC:C4:72 1500
bond1 169.254.136.7 169.254.0.0 0.0.0.0 10.180.10.1 00:1A:4B:DC:C4:72 1500
Check: Node connectivity for interface bond1
Result: Node connectivity passed for interface bond1
Check: Node connectivity for interface bond0
Result: Node connectivity failed for interface bond0
Result: Node connectivity check failed
<snipped>But if I just run the component with comp nodecon it succeeds!
runcluvfy.sh comp nodecon -n rac-node1 -verbose
Verifying node connectivity
Checking node connectivity...
Checking hosts config file...
Node Name Status Comment
rac-node1 passed
Verification of the hosts config file successful
Interface information for node rac-node1
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
bond0 10.180.201.15 10.180.0.0 0.0.0.0 10.180.10.1 00:1A:4B:DC:F8:54 1500
bond0 10.180.201.21 10.180.0.0 0.0.0.0 10.180.10.1 00:1A:4B:DC:F8:54 1500
bond0 10.180.201.115 10.180.0.0 0.0.0.0 10.180.10.1 00:1A:4B:DC:F8:54 1500
bond1 10.255.255.15 10.255.255.0 0.0.0.0 10.180.10.1 00:1A:4B:DC:C4:72 1500
bond1 169.254.136.7 169.254.0.0 0.0.0.0 10.180.10.1 00:1A:4B:DC:C4:72 1500
Check: Node connectivity of subnet 10.180.0.0
Source Destination Connected?
rac-node1[10.180.201.15] rac-node1[10.180.201.21] yes
rac-node1[10.180.201.15] rac-node1[10.180.201.115] yes
rac-node1[10.180.201.21] rac-node1[10.180.201.115] yes
Result: Node connectivity passed for subnet 10.180.0.0 with node(s) rac-node1
Check: TCP connectivity of subnet 10.180.0.0
Source Destination Connected?
rac-node1:10.180.201.15 rac-node1:10.180.201.21 passed
rac-node1:10.180.201.15 rac-node1:10.180.201.115 passed
Result: TCP connectivity check passed for subnet 10.180.0.0
Check: Node connectivity of subnet 10.255.255.0
Result: Node connectivity passed for subnet 10.255.255.0 with node(s) rac-node1
Check: TCP connectivity of subnet 10.255.255.0
Result: TCP connectivity check passed for subnet 10.255.255.0
Check: Node connectivity of subnet 169.254.0.0
Result: Node connectivity passed for subnet 169.254.0.0 with node(s) rac-node1
Check: TCP connectivity of subnet 169.254.0.0
Result: TCP connectivity check passed for subnet 169.254.0.0
Interfaces found on subnet 10.180.0.0 that are likely candidates for VIP are:
rac-node1 bond0:10.180.201.15 bond0:10.180.201.21 bond0:10.180.201.115
Interfaces found on subnet 169.254.0.0 that are likely candidates for VIP are:
rac-node1 bond1:169.254.136.7
Interfaces found on subnet 10.255.255.0 that are likely candidates for a private interconnect are:
rac-node1 bond1:10.255.255.15
Result: Node connectivity check passed
Verification of node connectivity was successful.I'm not sure why? -
Time machine error - backup fails due to sparsebundle already in use
Since upgrading, Time machine reports backup error:
TIme Machine Error
The backup disk image ...sparsebundle is already in use.
Any thoughts?Thanks russ. After the initial upgrade to Mt Lion, no backups have been made. Every attempt reports the sparsebundle error. I recently updated to 10.8.1 and a whole new set of problems have shown up which is having me question the wisdom of continuing to invest in Apple product.
I have decided to pack it in with regard to the timecapsule product, as it is just too unreliable, and certainly not worth the continued time and effort it has been taking to try and get it to work. I have instead gone with an online backup service, Crashplan. I have the backup service I am seeing and I am no longer frittering away valuable time on something that ought to just work.
Problem solved. -
Cluster node addition fails on cleanup
We have a 2 node cluster setup already
(2) HP BL460c G8 servers connected to a VNX5300 SAN (Nodes 1 & 2)
Server 2012 Datacenter installed
Quarum: Node + Disk
all failover tests went perfectly and all VMs are healthy
Verification on the cluster show some warnings but no failures
We have rebuilt a server (node 3) renamed it and have run a single machine verification test to see if it is suitable for clustering. it succeeded with minor warnings
We ran verification on all three machines and received the formentioned warnings but no game stoppers, however when trying to add the host to the cluster we get the following error in the logs:
WARN mscs::ListenerWorker::operator (): ERROR_TIMEOUT(1460)' because of '[FTI][Initiator] Aborting connection because NetFT route to node <machine name> on virtual IP fe80::cdf2:f6ea:5ce:5f9c:~3343~ has failed to come up.'
This happens after the node is added to the cluster but reports a failure on cleanup processes and reverts everything back. I have done all of this under my domain_admin account.
before and after the attempt to add the NetFT adapter is in media disconnect, during the attempts it does pull down a 169 address as it is supposed to
Node 3 Networking breakdown
The new host uses an Intel/HP NC365T Quard port adaptor
port 1: Mgmt : Static assignment subnet 1
port 2: VM net: Static assignment sibmet 2
port 3: Heartbeat: assigned via DHCP subnet 1 pool (we have attempted the above with this disabled as well)
NCU is not installed for the adapter and bridging in server 2012 is not enabled.
I am at a loss, and would appreciate any additional help as i have spent 3 days researching this to try and find the cause.Hi,
The error message mentioned an IPv6 address, have you enable IPv6 network for the cluster?
Check the IPv6 network configuration in the 3<sup>rd</sup> node server, what’s the status, enabled or disabled?
When two or more cluster nodes are running IPv6 for heartbeat communications, they will require any additional nodes that join to also running IPv6. If the node server has IPv6 disabled, it will fail to join.
Also whether these cluster node server has antivirus software installed, you may temporarily disable it and rejoin the new node.
Check that and give us feedback for further troubleshooting, for more information please refer to following MS articles:
Failover Cluster Creation Issue
http://social.technet.microsoft.com/Forums/en-US/winserverClustering/thread/1ed1936d-6283-46cc-951d-9c236329b8be
Failure to re-add rebuilt cluster node to Windows 2008 R2 Cluster: System error 1460 has occurred (0x000005b4). Timeout.
http://social.technet.microsoft.com/Forums/en-US/winserverClustering/thread/a21e9a8e-9f68-4d83-a747-204000cda65a
Hope this helps!
TechNet Subscriber Support
If you are
TechNet Subscription
user and have any feedback on our support quality, please send your feedback
here.
Lawrence
TechNet Community Support -
On HP-UX 11g rac cluvfy tool failed with "/dev/async" (incorrect setting for minor number.)
Hi ,
We are planing to upgrade our 10g R2 CRS to 11g R2 CRS on HP-UX server ,while running cluvfy tool we are getting the below error.Please help me to fix this issue.
Checking settings of device file "/dev/async"
Node Name Available Comment
erpdev04 yes failed (incorrect setting for minor number.)
erpdev03 yes failed (incorrect setting for minor number.)
Result: Check for settings of device file "/dev/async" failed.
Pre-check for cluster services setup was unsuccessful on all the nodes.
oracle.oracle.erpdev03.fwprod_app1> (/app/oracle/oracle_source/patches/bin)# /sbin/mknod /dev/async c 101 0x104
-
11gr2 rac silent install failed with INS-35421
When ran 11gr2 silent installation. it has this warning info:
[WARNING] [INS-35421] This option installs a single instance database only.
CAUSE: You have chosen to perform a Desktop class install on a cluster. This option will not install Oracle RAC.
ACTION: If you wish to install Oracle RAC, choose to perform a Server class install.
And i find that the db was not been created.( I selected creating database in response file)
The folowing is my response file:(this file was created by OUI, and i did not find where to set the option of desktop/server class)
oracle.install.responseFileVersion=/oracle/install/rspfmt_dbinstall_response_schema_v11_2_0
oracle.install.option=INSTALL_DB_AND_CONFIG
ORACLE_HOSTNAME=node1.us.oracle.com
UNIX_GROUP_NAME=oinstall
INVENTORY_LOCATION=/home/oracle/app/oraInventory
SELECTED_LANGUAGES=en
ORACLE_HOME=/home/oracle/app/oracle/product/11.2.0/dbhome_1
ORACLE_BASE=/home/oracle/app/oracle
oracle.install.db.InstallEdition=EE
oracle.install.db.isCustomInstall=false
oracle.install.db.customComponents=
oracle.install.db.DBA_GROUP=dba
oracle.install.db.OPER_GROUP=dba
oracle.install.db.CLUSTER_NODES=node1,node2
oracle.install.db.config.starterdb.type=GENERAL_PURPOSE
oracle.install.db.config.starterdb.globalDBName=orcl.us.oracle.com
oracle.install.db.config.starterdb.SID=orcl
oracle.install.db.config.starterdb.characterSet=AL32UTF8
oracle.install.db.config.starterdb.memoryLimit=791
oracle.install.db.config.starterdb.memoryOption=true
oracle.install.db.config.starterdb.installExampleSchemas=true
oracle.install.db.config.starterdb.enableSecuritySettings=true
oracle.install.db.config.starterdb.password.ALL=Oracle123
oracle.install.db.config.starterdb.password.SYS=
oracle.install.db.config.starterdb.password.SYSTEM=
oracle.install.db.config.starterdb.password.SYSMAN=
oracle.install.db.config.starterdb.password.DBSNMP=
oracle.install.db.config.starterdb.control=DB_CONTROL
oracle.install.db.config.starterdb.gridcontrol.gridControlServiceURL=
oracle.install.db.config.starterdb.dbcontrol.enableEmailNotification=false
oracle.install.db.config.starterdb.dbcontrol.emailAddress=
oracle.install.db.config.starterdb.dbcontrol.SMTPServer=
oracle.install.db.config.starterdb.automatedBackup.enable=false
oracle.install.db.config.starterdb.automatedBackup.osuid=
oracle.install.db.config.starterdb.automatedBackup.ospwd=
oracle.install.db.config.starterdb.storageType=FILE_SYSTEM_STORAGE
oracle.install.db.config.starterdb.fileSystemStorage.dataLocation=/storage/oradata
oracle.install.db.config.starterdb.fileSystemStorage.recoveryLocation=
oracle.install.db.config.asm.diskGroup=
oracle.install.db.config.asm.ASMSNMPPassword=
MYORACLESUPPORT_USERNAME=
MYORACLESUPPORT_PASSWORD=
SECURITY_UPDATES_VIA_MYORACLESUPPORT=false
DECLINE_SECURITY_UPDATES=true
PROXY_HOST=
PROXY_PORT=
Edited by: user778302 on Jun 9, 2010 8:21 PMWindows 7 Enterprise
I have read portions of the Installation manual, and yes, I am aware of the issues with DHCP but that's how we do things here, so I'm not going to change that setting. From reading through the installation instructions, I see that the 11gR1 installation program asked for much more information, i.e., many more decisions than the 11gR2 installation program. I do not know if this is because of some choice up front that then excludes other options. Thanks.
Ken
Kwn -
Weblogic 12c fails with exception: DefaultResponseDestination already bound while deploying an ear
The stack trace is as follows:
Unable to deploy EJB: ATT_RNM_MDB from interface-ejb-jar.jar:
DefaultResponseDestination is already bound
Caused By: javax.naming.NameAlreadyBoundException: DefaultResponseDestination is already bound; remaining name 'app/ejb/interface-ejb-jar/jar/#ATT_RNA_MDB/comp/env/jms'
We have an ear- ATT_JMS_Interface which has 2 MDBs- ATT_RNM_MDB and ATT_RNA_MDB. Both are pointing to the same defaultResponseDestination queue as mentioned in the weblogic-ejb-jar.xml below:
weblogic-enterprise-bean>
<ejb-name>ATT_RNA_MDB</ejb-name>
<resource-description>
<res-ref-name>jms/DefaultResponseConnectionFactory</res-ref-name>
<jndi-name>weblogic.jms.XAConnectionFactory</jndi-name>
</resource-description>
<resource-env-description>
<resource-env-ref-name>jms/DefaultResponseDestination</resource-env-ref-name>
<jndi-name>com.amdocs.att.jms.rnmResponseQueue</jndi-name>
</resource-env-description>
<dispatch-policy>WorkManager-RNX</dispatch-policy>
</weblogic-enterprise-bean>
<weblogic-enterprise-bean>
<ejb-name>ATT_RNM_MDB</ejb-name>
<resource-description>
<res-ref-name>jms/DefaultResponseConnectionFactory</res-ref-name>
<jndi-name>weblogic.jms.XAConnectionFactory</jndi-name>
</resource-description>
<resource-env-description>
<resource-env-ref-name>jms/DefaultResponseDestination</resource-env-ref-name>
<jndi-name>com.amdocs.att.jms.rnmResponseQueue</jndi-name>
</resource-env-description>
<dispatch-policy>WorkManager-RNX</dispatch-policy>
</weblogic-enterprise-bean>
NOTE: This works perfectly fine on weblogic 10.3.3Try to clean the weblogic server cache directory located under Servers\XXXServer\cache.
Restart the weblogic instance and redeploy the applicatioṇ
Let us know if the issue still persists
Thanks,
Vijaya -
WLC 2504 - Ap join fails with "Unknown AP type. Using Controller Version!!!"
Hi,
I haven't encountered this problem before. On my WLC 2504 I've tried now software versions 8.0.100.0, 7.6.130.0 and 7.4.121.0 (as per recommendation from other supportforum-posts), but still get this debug error when I'm trying to join ap models 1142 and 2602:
(Cisco Controller) >debug capwap errors enable
(Cisco Controller) >*spamApTask5: Jan 02 02:11:46.549: Unknown AP type. Using Controller Version!!!
*spamApTask0: Jan 02 02:11:46.550: 88:43:e1:78:10:08 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 5,joined Aps =0
*spamApTask5: Jan 02 02:11:56.670: f8:66:f2:14:4e:c1 Deleting AP 10.68.254.101 which has not been plumbed
*spamApTask5: Jan 02 02:11:56.673: f8:66:f2:14:4e:c1 DTLS connection was closed
(Cisco Controller) >
Does anyone know what is failing here? Surely the ap's should be "known" in these software versions?
Best
Bent EskilHi I have the same issue, today i rebooted the controller after that no Access Point is joining the controller. While debug i can see same logs as given above. I have configured option 43 and 60 as well on cisco switch. Pool commands are:
ip dhcp pool Room-1
host 192.168.30.113 255.255.255.0
client-identifier 0188.1dfc.f7cb.30
default-router 192.168.30.3
domain-name mina.local
option 43 hex f108.aca8.1e68
dns-server 192.168.30.1 4.2.2.2
option 60 ascii "Cisco AP c3702
I have checked the time and country code all fine but still Access point are not joining. Can you help me out to figure out the issue.
Thanks -
Android: https fails with current 3.8 beta using URLStream
Hi,
i made a bug ticket https://bugbase.adobe.com/index.cfm?event=bug&id=3581906
Anybody also having the issue or does have a workaround?HI, Tomas
may i give you an advise?
If you really want your app run stable . PLZ package with "captive runtime" .
In my experience. Adobe guys will change API Behavior ,change API ,change everything random except themself . Do you remember the ShareObject behavior changed at AIR3.5.
since they cann't be trusted , you should always embeded AIR runtime . for your users, for yourself ,especially for adobe .
For all of AS3 developer ,God ,please bless us.
Raymond -
Account error "already in use".
When adding an email address to messages settings, and the verify fails with the message "already in use", what are common reasons for this. This is an aol account, which works fine.
Hi thanks, yes this account set up is on an iPad, for receiving messages, but when I add it to an iPhone to get messages at the same time, this is when I get the message "already in use". This aol address, is not the same as my apple Id email address, on either address.
-
Issues while Add / Delete RAC Node in Oracle 10g R2
Hi,
I have an requirement to add a New Node in the existing 2 Node RAC at Production, where 1 Node is Active & other one is passive due to licence issue & cannot keep both the nodes as active. Due to performance issues (Memory , CPU Cores ..etc) we are adding another new node.
Right now we are planning to add a 3rd database node making the new node as active and current active one as passive which is a swap & later on after final observation delete and decommission the current passive node.
This activity is checked at the Dev database with the same infrastructure (OS + Memory ..etc) but want to check what is the best approach (or) challenges we face during the RAC Node Addition / Deletion
RAC DB Version : 10.2.o.4
OS Version : RHEL 5.8
(1) Is the approach is right one , First Adding the node & later on delete
(2) If the approach is the correct , what would be the behavious of the 3rd node in means of active (or) passive
(3) We have taken RMAN backup , OS backup , CRS , ORACLE_HOME , ASM_Home backup , OCR & VD.
(4) Could you please give detail steps for adding / deleting node in 10g R2.
(5) Are they any known bugs to us with the DB release (or) OS while performing this activity.
Since this is a production machine we want to more proactive . Please correct or add any thing i am missing out ...
With Thanks,
RakeshHello Rakesh,
Please follow the following steps.
Node Addition Steps
1. Install and configure OS and hardware for new node.
2. Add Oracle Clusterware to the new node.
3. Configure ONS for the new node.
4. Add ASM home to the new node.
5. Add Databse home to the new node.
6. Add a listener to the new node.
7. Add ASM instance to the New Node.
8. Add a database instance to the new node.
Details of steps
1. run cluvfy to verify whether New node is ready for addition or not.
$ cluvfy stage -pre crsinst -n node2
2. from node1, execute
$/u01/app/crs11g/oui/bin/addNode.sh
3. Specify node2 vip address and follow instructions.
4. In the last of installtion it may through an wornig and will ask to click on YES. click on YES
5. from node1,
/u01/app/crs11g/bin/racgons add_config node2:6200
6. from Node1,set ORACLE_HOME=ASM_HOME and then execute addNode.sh from $ASM_HOME/oui/bin and Follow instrusctions.
7. From node1, set ORACLE_HOME=DB_HOME and then
/u01/app/oracle/product/11.1.0/db_1/oui/bin/addNode.sh
and Follow instructions.
8. from node2 start NETCA and configure listener for new node. While configuring Listener select the name of new node.
9. from node1 start dbca from ASM Home to configure ASM instance for new node.
10. Again from node1 start dbca from DB Home to add DB instance
Node deletion Steps
1. Delete the Database instance on the node to be deleted.
2. Clean up the ASM instance.
3. Remove the listener from the node to be deleted.
4. Remove the node from the database.
5. Remove the node from ASM.
6. Remove ONS configuration from the node to be deleted.
7. Remove the node from the clusterware
Details of Steps
1. Remove database Instance of node2
Dbca -> instance Management -> delete instance -> password for sys -> select node -> finish.
2. Stop asm for node2 from any nodes.
$srvctl stop asm –n node2
3. Remove asm for node2
$ srvctl remove asm -n node2
4. Remove Listener from Node2 using NETCA.
5. From Node2:
./runInstaller -updateNodeList ORACLE_HOME=$ORACLE_HOME "CLUSTER_NODES=node2" -local
6. From Node2, start runinstaller from Oracle_DB_Home/oui/bin, and remove "DB_HOME"
$ ./runinstaller
On the WELCOME Screen -> Deinstall product -> Select dbhome name (OraDb10g_Home1) -> Remove
7. From Node1:
./runInstaller -updateNodeList ORACLE_HOME=$ORACLE_HOME "CLUSTER_NODES=node1"
8. From Node2, set Oracle_Home to asm_1 and then fire:
./runInstaller -updateNodeList ORACLE_HOME=$ORACLE_HOME "CLUSTER_NODES=node2" -local
9. From Node2, start OUI and deinstall ASM Home.
10. From Node1, Set ORACLE_HOME= /u01/app/oracle/product/11.1.0/asm_1
11. From Node1: from /u01/app/oracle/product/11.1.0/asm_1/oui/bin, start OUI
./runInstaller -updateNodeList ORACLE_HOME=$ORACLE_HOME "CLUSTER_NODES=node1"
12. From Node2: as a root user (#) execute rootdelete.sh from /u01/app/crs11g/install
# /u01/app/crs11g/install/rootdelete.sh
13.From Node-1 first find out the node numbers
# /u01/app/crs11g/bin/olsnodes -n
output : node1 1
node2 2
14. From Node-1 as a root user (#):
# /u01/app/crs11g/install/rootdeletenode.sh node2[Node_Name] 2[node_no]
output:
CRS nodeapps are deleted successfully
clscfg: EXISTING configuration version 4 detected.
clscfg: version 4 is 11 Release 1.
Node deletion operation successful.
'node2' deleted successfully
15. From Node2 set ORACLE_HOME=CRS_HOME and then execute
$$ORACLE_HOME/oui/bin/runInstaller -updateNodeList ORACLE_HOME=$ORACLE_HOME "CLUSTER_NODES=node2" CRS=TRUE -local
16. ./runInstaller and remove CRS_HOME
17. From Node-1:
$ /u01/app/crs11g/oui/bin/runInstaller -updateNodeList ORACLE_HOME=$ORACLE_HOME "CLUSTER_NODES=node1" CRS=TRUE
18. check node is deleted from ./crs_stat -t
Maybe you are looking for
-
Pretty much like it says up top. I have a 27" imac that was running 10.6. Now that I upgraded to 10.7, it thinks it's a 24" for some reason and the resolution differential is making my mouse track annoying slow while inside programs. (But not on the
-
I can browse through tumblr just fine, but whenever I go to the login page it said: Secure Connection Failed. An error occurred during a connection to www.tumblr.com. Cannot communicate securely with peer: no common encryption algorithm(s). (Error co
-
I recently ran an updatedafter being prompted multiple times. Now I find there are a number of songs that I cannot sync to my iPhone. Some are songs purchased from iTunes. Is there anyway to remedy this? I'd really prefer not to have to repurchase
-
Classpath in - system variable or user variable?
Where should the classpath be specified? I am using the same machine so is it better to use system variables for specifying classpath in control panel or should I use user variable?
-
hi gurus, solution manager transaction codes. How it will help ful for us how to start it please help me am new to this course i would like to learn from the starting. Thanks & Regards rack29 points will be rewarded