RAC node connected to outside DB and pass 2 IP address
Experts,
we have a 4 nodes 11.1 RAC at red hat
As we know each node have 3 IP. --public, vip and privated IP.
it works well in domain inside network.
But we get a problem when try to connect to outside network client's database.
the connection string pass 2 IPs to client firewall (based on network monitor).
listener log show that connection is OK. But Conection is still blocked by client's firewall side.
The client network staff told us that we passed two IP address during connected connection.
Could some experts explain why does the RAC node's connected requested passs two IP to client database?
It is only discovered by network staff. we could not see 2 IP information in listener log file.
Is it our firewall NAT setting issue? or client firewall NAT setting issue
Thanks
Jim
Edited by: user589812 on Jan 21, 2010 2:25 PM
Hi Experts
The Two IP addresses that were being passed were one of the load balancer and one of the db server. the load balancer was supposed to mask the load balancer IP address and only pass the db IP address. Somehow, we were sending both IP to client database--outside network. But IT works well in inter network side. How to eliminate the load balancer IP address from coming to client network firewall --to client database server side?
I looking for help!
JIm
Similar Messages
-
Node connectivity,user existence:oracle and group existence:oinstall fail
hi all
i am trying to install Oracle Grid Infrastructure 11g R2 on Oracle Linux Enterprise edition
but while installing the following 3 errors are displaying.
1. node connectivity,
2. user existence:oracle
3. group existence:oinstall fail.
plz can anyone help me out how to resolve the above error?1. check connectivity to ALL nodes is OK, test ping, test ssh (should be passwordless) ,etc
2. check if the software owner is consistent across all nodes, check the owner id
3. check if the software group is consistent across all nodes, check the group id too
Cheers
FZheng
Edited by: FZheng on May 16, 2011 9:57 AM -
RAC node process using 25% physical memory
We have a QA server is non-RAC, and production is two-node RAC. We have a migration app that does an INSERT from SELECT over 2 instances. All of the machines have been in successful day-to-day use for several months...our only troublespot seems to be the migration app.
Today we started the app on the QA server and watched the oracle processes using top. They ran normally and finished without any problems.
The same app started on either of the RAC nodes produced process memory errors and died.
As the app ran, there was a process reading the data from the source instance and a process writing to the target instance. We confirmed this by querying the session data. It doesn't matter which of the nodes runs which target process...the result is the same.
The reading process(session) on the source instance seems to run normally. The write process on the target instance, however, begins slowly accumulating memory in about 16M chunks and holds on to them.
We saw this in the RES and in the MEM columns of top. The target process never released any memory, but slowly grabbed it until its
RES was 4GB and the %MEM was about 30%. The app then died with process memory error. This is reproducible over several runs.
( Per Metalink Note 567506.1, the recommended value for Linux 64-bit is 4294967295 ..we have that set. )
There are other oracle processes and instances running on both nodes which do not seem to be affected. The total number of processes on each machine is around 750..much lower than the nprocs ulimit of 63K.
These process are both oracle sessions spawned by the app.
I haven't seen any info on the web or Metalink that matches these symptoms, so I thought I'd try the experts.
Why would the write session continuously use up physical memory, but only on RAC nodes?
We are running RHEL5 on Dell Poweredge 2950 w 16K Physical mem. Version of 10g is R2.0.4.user12017889 wrote:
The write process on the target instance, however, begins slowly accumulating memory in about 16M chunks and holds on to them.Exactly what process is this? An Oracle server process? Dedicated or shared server?
We saw this in the RES and in the MEM columns of top. The target process never released any memory, but slowly grabbed it until its
RES was 4GB and the %MEM was about 30%. How does the writer process work? Does it use PL/SQL? Does it use bulk processing? How does it call the reader process? Or does the reader process call it? Is this over a database link.
The app then died with process memory error. This is reproducible over several runs.If this is an Oracle server process, then there should be an entry in the alert log of the instance that recorded the crash and includes the name of the trace file generated by the crash. -
Bill to and ship to address on PO
Asper Business requirement we want Bill to and Ship to adrresses on PO.How to configure this
ThxHi,
You Want this in the PO Print out or in the PO screen it self.
if it is for PO it self ,you can define a Text feild in the header for the Bill to
And in the Item text for ship to .
If you Want the Ship to and Bill to from CSO in Print Out..(if the PO is third part CSO driven PO)
the Logic is EKKN-- sales order number ,And VBPA for the sales order partner functions
or else
The Bill to would be the Plant to which the vendor is raising the invoice
NOrmally it can be the Plant address from the first line item in the PO,which is not deleted.
Or the same can be Maintained in standard text So10.
Regarding Ship to.address it can be four ways-plant,customer,vendor,address ID
Plant
EKPO -Pass PO NUmber - collect the plant and pass in table T001W to get the address number
and pass the address number to ADRC table
Customer (third party)--item category 'S"
IN table EKPO -collect the customer Number-KUNNR and pass that value to KNA1 table and then get the address number and then get the address from ADRC table.
Direct address number ( created by t code MEAN- Type ME01)
This adress number-ADRNR can be taken from EKPO table and pass this value to adrc table to get the address.
Vendor ( subcontracting)
In this IN EKPO we will have the vendor field -LIFNR and this field collect the vendor number and pass in LFA1 and get the address number and then pass the address number to ADRC table
If in EKPO,the address number and customer vendor field are blank then it picked from the plant and we have to default the Plant Address
hope so it helps
Regards
Anjanna
Edited by: Shiva Rajanala on May 6, 2009 4:28 AM -
Huge number of idle connections from loopback ip on oracle RAC node
Hi,
We have a 2node 11gR2(11.2.0.3) oracle RAC node. We are seeing huge number of idle connection(more than 5000 in each node) on both the nodes and increasing day by day. All the idle connections are from VIP and loopback address(127.0.0.1.47971 )
netstat -an |grep -i idle|more
127.0.0.1.47971 Idle
any insight will be helpful.
The server is suffering memory issues occasionally (once in a month).
ORA-27300: OS system dependent operation:fork failed with status: 11
ORA-27301: OS failure message: Resource temporarily unavailable
Thanksuser12959884 wrote:
Hi,
We have a 2node 11gR2(11.2.0.3) oracle RAC node. We are seeing huge number of idle connection(more than 5000 in each node) on both the nodes and increasing day by day. All the idle connections are from VIP and loopback address(127.0.0.1.47971 )
netstat -an |grep -i idle|more
127.0.0.1.47971 Idle
any insight will be helpful.
The server is suffering memory issues occasionally (once in a month).
ORA-27300: OS system dependent operation:fork failed with status: 11
ORA-27301: OS failure message: Resource temporarily unavailable
Thankswe can not control what occurs on your DB Server.
How do I ask a question on the forums?
SQL and PL/SQL FAQ
post results from following SQL
SELECT * FROM V$VERSION; -
RAC Node hang and unexpected reboot
Hello friends
We are facing the intermittent issue of node hang and unexpected shutdown of node. This is 2 node rac 10.2.03 running on windows 2003. Here's crsd.log
2009-07-16 17:24:03.058: [ OCRMSG][5252]prom_rpc: CLSC recv failure..ret code 7
2009-07-16 17:24:03.058: [ OCRMSG][5252]prom_rpc: possible OCR retry scenario
2009-07-16 17:24:03.058: [ COMMCRS][5616]clscsendx: (0000000002AF5C60) Physical connection (0000000003892080) not active
2009-07-16 17:24:03.058: [ OCRMSG][5616]prom_rpc: CLSC send failure..ret code 11
2009-07-16 17:24:03.058: [ OCRMSG][5616]prom_rpc: possible OCR retry scenario
2009-07-16 17:24:03.105: [ COMMCRS][5252]clscsendx: (0000000002AF5C60) Connection not active
2009-07-16 17:24:03.105: [ OCRMSG][5252]prom_rpc: CLSC send failure..ret code 6
2009-07-16 17:24:03.105: [ OCRMSG][5252]prom_rpc: possible OCR retry scenario
2009-07-16 17:24:03.105: [ COMMCRS][5616]clscsendx: (0000000002AF5C60) Connection not active
2009-07-16 17:24:03.105: [ OCRMSG][5616]prom_rpc: CLSC send failure..ret code 6
2009-07-16 17:24:03.105: [ OCRMSG][5616]prom_rpc: possible OCR retry scenario
2009-07-16 17:24:03.152: [ COMMCRS][5252]clscsendx: (0000000002AF5C60) Connection not active
2009-07-16 17:24:03.152: [ OCRMSG][5252]prom_rpc: CLSC send failure..ret code 6
2009-07-16 17:24:03.152: [ OCRMSG][5252]prom_rpc: possible OCR retry scenario
2009-07-16 17:24:03.168: [ COMMCRS][5616]clscsendx: (0000000002AF5C60) Connection not active
2009-07-16 17:24:03.168: [ OCRMSG][5616]prom_rpc: CLSC send failure..ret code 6
2009-07-16 17:24:03.168: [ OCRMSG][5616]prom_rpc: possible OCR retry scenario
2009-07-16 17:24:03.215: [ COMMCRS][5252]clscsendx: (0000000002AF5C60) Connection not active
2009-07-16 17:24:03.215: [ OCRMSG][5252]prom_rpc: CLSC send failure..ret code 6
2009-07-16 17:24:03.215: [ OCRMSG][5252]prom_rpc: possible OCR retry scenario
2009-07-16 17:24:03.215: [ COMMCRS][5616]clscsendx: (0000000002AF5C60) Connection not active
2009-07-16 17:24:03.215: [ OCRMSG][5616]prom_rpc: CLSC send failure..ret code 6
2009-07-16 17:24:03.215: [ OCRMSG][5616]prom_rpc: possible OCR retry scenario
2009-07-16 17:24:03.261: [ COMMCRS][5616]clscsendx: (0000000002AF5C60) Connection not active
2009-07-16 17:24:03.261: [ OCRMSG][5616]prom_rpc: CLSC send failure..ret code 6
2009-07-16 17:24:03.261: [ OCRMSG][5616]prom_rpc: possible OCR retry scenario
Please throw me the light, what may be issue.I suggest you install [ IPD/OS|http://www.oracle.com/technology/products/database/clustering/ipd_download_homepage.html] on you cluster. This will give you all the relevant OS statistics so when a node reboot happens, you can figure out what the state of the nodes was at that time and then fix the problem. The hang is often caused by something other than Oracle RAC.
-
Hi, I use facetime regularly with my parents who live outside US and it stopped working. Their ipad2 rings,says connecting..and then 'call failed'. Upgrading their iOS5 (or 6) is not a option as my parents do not know to do this. I came across forums where this issue is mentioned on apple support and cnet.
Is there another option apart from upgrading ?Well, in his defense, his parents bought him the player so I guess we can't blame him. Though the 6 GB versions were available in November so I guess they really did get 'nervous' about Christmas and like to get their shopping done early! Kudo's to you for trying to remain with the Creative line but for what you're looking for it's obviously not the player for you. Creative seems to be fine-tuning their line for the audio crowd. I'm into mp3 players for the audio. Sure, the ability to watch video's and look at pictures on a decent screen is a plus but for me at least, it's all about the music. And with music, 6 GB is more than enough. Heck, 8 GB would have been more than enough for me. I'm a subscriber to Napster-to-go, so I don't feel the need to carry 00 plus GB of stuff on my portable player. I honestly don't understand the desire to watch movies or TV shows on tiny little screens. But you're also talking to a guy who doesn't watch television. What a complete waste of time and brain cells. Probably the **competitor products we can't discuss here** or one of those players would better suit your needs. Companies are definately picking their niche markets carefully and Creative's decision to not offer hard dri've players any more seems to definately be saying bye-bye to that market. I can't say I blame them. Hard dri'ves eventually give up the ghost and are quite delicate for people on the go. Good ridance, I say. Let Apple, Zune and all the others cater to the Z generation's need to be spoonfed their video/TV addictions anywhere and everywhere. I'll pass. It's one thing to be able to enjoy some music on the go and enhance an otherwise dull work day or dri've. But movies/TV shows at work, school, or wherever? Please. Cut the cord! Just my $.02 - YMMV! M.Message Edited by Dale-CL on 2-26-2007 :4 AM
-
Could not connect to the RAC node
Dear all,
I've setup an Oracle RAC on 2 nodes(Windows Server 2008) with iSCSI as storage. Currently I'm trying to verify the availibility of RAC using the following situation: Reboot the first node and and at the same time connect to the RAC using the VIP of that node. But I get the following error.
"The Network Adapter could not establish the connection"
My assumption is that the connection request'll be redirected to the 2nd node. But that doesnot happen. Could you please explain the situation.
Regards
KRADear Uwe Hesse,
Have you configured connect time failover in your tnsnames.ora?
Else the error is to be expected.
Show us the tnsnames.ora part for the connect descriptor you use for the connect, please!This is the connection descriptor used for testing failover :
jdbc:oracle:thin:@(DESCRIPTION =
(ADDRESS_LIST =
(failover = on)
(ADDRESS = (PROTOCOL = TCP)(HOST = RAC1-vip)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl.domain_name)
(FAILOVER_MODE = (TYPE = SELECT)(METHOD = BASIC)(RETRIES = 180)(DELAY = 5))
And that for evaluating performance of RAC is
jdbc:oracle:thin:@(DESCRIPTION =
(load_balance = on)
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = RAC1-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = RAC2-vip)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl.domain_name)
Edited by: KRA on Jul 25, 2011 5:14 PM -
Listener on RAC node 2 not accepting user connections
Hey guys i am experiencing a disturbing scenario, i have a 2 RAC node cluster . The problem is that the second listener is not registering any connections . I have verified the services of listener using lsnrctl status (the default name is LISTENER), i also have verified the local and remote listener parameters they are fine but running the fol query shows count =0 against inst_id=2;
SQL > select count() from gv$session where username='XYZ' and inst_id=2;*
Count
0
Any help is appreciated in this regard please.Yeah i know very well the purpose of SCAN . But web admins are sticking to the vip . Well here is the output of lsnrctl status:-
LSNRCTL for Solaris: Version 11.2.0.1.0 - Production on 11-APR-2013 16:41:55
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Solaris: Version 11.2.0.1.0 - Production
Start Date 10-MAR-2013 13:00:14
Uptime 17 days 2 hr. 42 min. 18 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/11.2.0/grid/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/fedb6/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=5.2.21.1)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=5.2.21.7)(PORT=1521)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM2", status READY, has 1 handler(s) for this service...
Service "grid1.xyz" has 1 instance(s).
Instance "grid12", status READY, has 1 handler(s) for this service...
Service "grid1XDB.xyz" has 1 instance(s).
Instance "grid12", status READY, has 1 handler(s) for this service...
Service "xyz" has 1 instance(s).
Instance "grid12", status READY, has 1 handler(s) for this service...
The command completed successfully
and here is tnsnames.ora output :-
GRID1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = grid1-scan)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = grid1.xyz)
PRIMARY1_SERV =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 5.2.21.1)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = grid1.xyz)
(INSTANCE_NAME= grid11)
PRIMARY2_SERV =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 5.2.21.6)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = grid1.xyz)
(INSTANCE_NAME = grid12)
) -
Yes, my cousins iPod is disabled. It says "ipod is disabled, connect to iTunes", I did that and it will not connect to iTunes, because it needs the pass code. The pass code key board will not show up and I cant connect. Please help me figure this problem out, my cousin is depending on me. Thanks, a concern customer.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I just bought a new Iphone and when I connected it to itunes and I downloaded the backup from my last device, now I can't pass this step and every time I connect it to itunes is the same thing. And I can't download any app because problems with my account regarding the credit card but the information is correct and it says it is not!!!
You'll have to contact iTunes store support regarding your credit card information problem: http://www.apple.com/emea/support/itunes/contact.html. I'm not clear on what you're saying about your backup. Are you saying that when you connect to iTunes it's asking you to restore from backup even though you already have?
-
Connecting Crystal reports with dashboards and passing parameters
Hi ,
Can anyone have any document on Connecting Crystal reports with dashboards and passing parameters.
I would appreciate for this.
Thank You.Hi Ganesh,
You can refer the following links for connecting Crystal reports with dashboards:
Dashboard integration in Crystal Reports using flash variables | Clariba Blog
https://websmp102.sapag.de/~sapidp/011000358700001426732009E/Xcelsius_EmbeddingInCR2008.pdf
http://events.asug.com/2012BOUC/0315_Integrating_SAP_Dashboards_into_SAP_Crystal_Reports.pdf
Regards,
Renu -
Oracle RAC Private Connection fail. what is the preferable node?
Hello Everyone! I need all your helps about Oracle RAC.
I would like to know that when the private network in oracle rac down, which is the preferable node in the cluster (cluster of 2 nodes) to takeover the cluster.
Can I set/get the failover policy to point to one node in the cluster?
Thank you in advance.Hi,
Base on my testing environment, I use VMware to build the oracle rac.
Because ifdown command reacts differently, now I use vmware feature on Network interface "disconnect" as pulling out the link from network interface.
Please, kindly have a look on the actions, I have done. Correct me if I am wrong.
I have two nodes which are node1 "rac1" and node2 "rac2".
1. I start crs on node2 "rac2" so that node2 have the role to write to OCR
2. After node2 start completely, I start crs on node1 "rac1" to join cluster.
3. I use disconnect network link from private network on node1, and I also check using ethtool to check link detected:
[root@rac1 ~]# ethtool eth1 | grep Link
Link detected: no
[root@rac1 ~]# ifconfig eth1
eth1 Link encap:Ethernet HWaddr 00:0C:29:6A:73:20
inet addr:192.168.2.231 Bcast:192.168.2.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:2658671 errors:0 dropped:0 overruns:0 frame:0
TX packets:2069398 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1615768514 (1.5 GiB) TX bytes:985464556 (939.8 MiB)
4. After some seconds, I checked the log file
[cssd(9517)]CRS-1612:Network communication with node rac2 (2) missing for 50% of timeout interval. Removal of this node from cluster in 14.620 seconds
2013-02-12 04:12:30.419
[cssd(9517)]CRS-1611:Network communication with node rac2 (2) missing for 75% of timeout interval. Removal of this node from cluster in 6.610 seconds
2013-02-12 04:12:34.436
[cssd(9517)]CRS-1610:Network communication with node rac2 (2) missing for 90% of timeout interval. Removal of this node from cluster in 2.590 seconds
2013-02-12 04:12:37.036
[cssd(9517)]CRS-1607:Node rac2 is being evicted in cluster incarnation 251972986; details at (:CSSNM00007:) in /u01/app/11.2.0/grid/log/rac1/cssd/ocssd.log.
2013-02-12 04:12:39.136
[cssd(9517)]CRS-1625:Node rac2, number 2, was manually shut down
2013-02-12 04:12:39.140
[cssd(9517)]CRS-1601:CSSD Reconfiguration complete. Active nodes are rac1 .
2013-02-12 04:12:39.157
[crsd(9957)]CRS-5504:Node down event reported for node 'rac2'.
2013-02-12 04:12:45.519
[crsd(9957)]CRS-2773:Server 'rac2' has been removed from pool 'Generic'.
2013-02-12 04:12:45.519
[crsd(9957)]CRS-2773:Server 'rac2' has been removed from pool 'ora.oradb'
5. I check the status resource of cluster and I see that Node1 "rac1" is the survived node.
Please help me to analyze it.
Thanks,
Edited by: 985243 on Feb 12, 2013 1:53 AM -
Hello, please help, my interface is connected to the microphone and when i open Logic 9 it does´t work. But I opened garageband to check and it works fine. I can record voice with any effect... With Logic i see the sound passes in the interface but does not arrive in Logic. The Loops works fine and i can hear. Is just the sound to record the voice it does not work. What can i do ??? I used Logic before in the same computer and it worked fine. Thank you so much, I´m a begginer recording myself.
Make sure you go into preferences in Logic and set the audio input to be your interface and the audio output to be either built in output or the interface, if that is hooked up to something else. It sounds like Garageband has the audio interface set as the input but not Logic.
Also make sure you close all other applications except Logic to ensure it is not running in slave mode... -
Hello everyone,
I have met an error,that is our RAC node auto restart with below messages.
#/u01/app/oracle/diag/rdbms/odsdb/odsdb1/trace/alert_odsdb1.log
Fri Jun 07 12:23:42 2013
Thread 1 cannot allocate new log, sequence 58363
Checkpoint not complete
Current log# 2 seq# 58362 mem# 0: +DATA/odsdb/onlinelog/group_2.265.812288839
Current log# 2 seq# 58362 mem# 1: +DATA/odsdb/onlinelog/group_2.266.812288839
Fri Jun 07 12:23:42 2013
NOTE: ASMB terminating
Errors in file /u01/app/oracle/diag/rdbms/odsdb/odsdb1/trace/odsdb1_asmb_32641.trc:
ORA-15064: ? ASM ??????
ORA-03113: ?????????
?? ID:
?? ID: 2047 ???: 5
Errors in file /u01/app/oracle/diag/rdbms/odsdb/odsdb1/trace/odsdb1_asmb_32641.trc:
ORA-15064: ? ASM ??????
ORA-03113: ?????????
?? ID:
?? ID: 2047 ???: 5
ASMB (ospid: 32641): terminating the instance due to error 15064
Fri Jun 07 12:23:44 2013
ORA-1092 : opitsk aborting process
Fri Jun 07 12:23:46 2013
ORA-1092 : opitsk aborting process
Instance terminated by ASMB, pid = 32641
Fri Jun 07 12:25:02 2013
Starting ORACLE instance (normal)
Fri Jun 07 12:25:23 2013
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Private Interface 'eth1:1' configured from GPnP for use as a private interconnect.
[name='eth1:1', type=1, ip=169.254.37.103, mac=00-26-55-eb-61-89, net=169.254.0.0/16, mask=255.255.0.0, use=haip:cluster_interconnect/62]
Public Interface 'eth0' configured from GPnP for use as a public interface.
[name='eth0', type=1, ip=135.33.2.8, mac=00-26-55-eb-61-88, net=135.33.2.0/27, mask=255.255.255.224, use=public/1]
Public Interface 'eth0:1' configured from GPnP for use as a public interface.
[name='eth0:1', type=1, ip=135.33.2.13, mac=00-26-55-eb-61-88, net=135.33.2.0/27, mask=255.255.255.224, use=public/1]
Picked latch-free SCN scheme 3
Using LOG_ARCHIVE_DEST_1 parameter default value as /u01/app/oracle/product/11.2.0/dbhome_2/dbs/arch
Autotune of undo retention is turned on.
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options.
ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_2
System name: Linux
Node name: odsdb1
Release: 2.6.18-308.el5
Version: #1 SMP Fri Jan 27 17:17:51 EST 2012
Machine: x86_64
Using parameter settings in server-side pfile /u01/app/oracle/product/11.2.0/dbhome_2/dbs/initodsdb1.ora
System parameters with non-default values:
processes = 4500
sessions = 6784
event = ""
spfile = "+DATA/odsdb/spfileodsdb.ora"
nls_language = "SIMPLIFIED CHINESE"
nls_territory = "CHINA"
memory_target = 170G
control_files = "+DATA/odsdb/controlfile/current.262.812288837"
control_files = "+DATA/odsdb/controlfile/current.261.812288837"
db_block_size = 8192
compatible = "11.2.0.0.0"
db_files = 4096
cluster_database = TRUE
db_create_file_dest = "+DATA"
db_recovery_file_dest = ""
db_recovery_file_dest_size= 38820M
thread = 1
undo_tablespace = "UNDOTBS1"
instance_number = 1
remote_login_passwordfile= "EXCLUSIVE"
db_domain = ""
dispatchers = "(PROTOCOL=TCP) (SERVICE=odsdbXDB)"
remote_listener = "odsdb-cluster-scan:1521"
job_queue_processes = 1000
audit_file_dest = "/u01/app/oracle/admin/odsdb/adump"
audit_trail = "DB"
db_name = "odsdb"
open_cursors = 300
diagnostic_dest = "/u01/app/oracle"
Cluster communication is configured to use the following interface(s) for this instance
169.254.37.103
cluster interconnect IPC version:Oracle UDP/IP (generic)
IPC Vendor 1 proto 2
Fri Jun 07 12:25:33 2013
PMON started with pid=2, OS id=22959
Fri Jun 07 12:25:33 2013
PSP0 started with pid=3, OS id=22962
Fri Jun 07 12:25:34 2013
VKTM started with pid=4, OS id=22971 at elevated priority
VKTM running at (1)millisec precision with DBRM quantum (100)ms
Fri Jun 07 12:25:34 2013
GEN0 started with pid=5, OS id=22977
Fri Jun 07 12:25:34 2013
DIAG started with pid=6, OS id=22979
Fri Jun 07 12:25:35 2013
DBRM started with pid=7, OS id=22981
Fri Jun 07 12:25:35 2013
PING started with pid=8, OS id=22983
Fri Jun 07 12:25:35 2013
ACMS started with pid=9, OS id=22985
Fri Jun 07 12:25:35 2013
DIA0 started with pid=10, OS id=22987
Fri Jun 07 12:25:35 2013
LMON started with pid=11, OS id=22989
Fri Jun 07 12:25:35 2013
LMD0 started with pid=12, OS id=22991
* Load Monitor used for high load check
* New Low - High Load Threshold Range = [61440 - 81920]
Fri Jun 07 12:25:35 2013
LMS0 started with pid=13, OS id=22994 at elevated priority
Fri Jun 07 12:25:35 2013
LMS1 started with pid=14, OS id=22998 at elevated priority
Fri Jun 07 12:25:35 2013
LMS2 started with pid=15, OS id=23002 at elevated priority
Fri Jun 07 12:25:35 2013
LMS3 started with pid=16, OS id=23006 at elevated priority
Fri Jun 07 12:25:35 2013
RMS0 started with pid=17, OS id=23010
Fri Jun 07 12:25:35 2013
LMHB started with pid=18, OS id=23013
Fri Jun 07 12:25:35 2013
MMAN started with pid=19, OS id=23015
Fri Jun 07 12:25:35 2013
DBW0 started with pid=20, OS id=23017
Fri Jun 07 12:25:35 2013
DBW1 started with pid=21, OS id=23019
Fri Jun 07 12:25:35 2013
DBW2 started with pid=22, OS id=23022
Fri Jun 07 12:25:35 2013
DBW3 started with pid=23, OS id=23024
Fri Jun 07 12:25:35 2013
DBW4 started with pid=24, OS id=23026
Fri Jun 07 12:25:35 2013
DBW5 started with pid=25, OS id=23028
Fri Jun 07 12:25:35 2013
DBW6 started with pid=26, OS id=23031
Fri Jun 07 12:25:35 2013
DBW7 started with pid=27, OS id=23033
Fri Jun 07 12:25:35 2013
LGWR started with pid=28, OS id=23035
Fri Jun 07 12:25:35 2013
CKPT started with pid=29, OS id=23037
Fri Jun 07 12:25:35 2013
SMON started with pid=30, OS id=23039
Fri Jun 07 12:25:35 2013
RECO started with pid=31, OS id=23041
Fri Jun 07 12:25:35 2013
RBAL started with pid=32, OS id=23043
Fri Jun 07 12:25:35 2013
ASMB started with pid=33, OS id=23045
Fri Jun 07 12:25:35 2013
MMON started with pid=34, OS id=23048
Fri Jun 07 12:25:35 2013
MMNL started with pid=35, OS id=23052
Fri Jun 07 12:25:35 2013
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
NOTE: initiating MARK startup
starting up 1 shared server(s) ...
Starting background process MARK
Fri Jun 07 12:25:35 2013
MARK started with pid=37, OS id=23056
NOTE: MARK has subscribed
lmon registered with NM - instance number 1 (internal mem no 0)
Reconfiguration started (old inc 0, new inc 119)
List of instances:
1 2 (myinst: 1)
Global Resource Directory frozen
* allocate domain 0, invalid = TRUE
Communication channels reestablished
* domain 0 valid according to instance 2
* domain 0 valid = 1 according to instance 2
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
LMS 3: 0 GCS shadows cancelled, 0 closed, 0 Xw survived
LMS 1: 0 GCS shadows cancelled, 0 closed, 0 Xw survived
LMS 2: 0 GCS shadows cancelled, 0 closed, 0 Xw survived
LMS 0: 0 GCS shadows cancelled, 0 closed, 0 Xw survived
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Submitted all GCS remote-cache requests
Fix write in gcs resources
Reconfiguration started (old inc 119, new inc 121)
List of instances:
1 2 (myinst: 1)
Nested reconfiguration detected.
Global Resource Directory frozen
Communication channels reestablished
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
LMS 0: 0 GCS shadows cancelled, 0 closed, 0 Xw survived
LMS 3: 0 GCS shadows cancelled, 0 closed, 0 Xw survived
LMS 2: 0 GCS shadows cancelled, 0 closed, 0 Xw survived
LMS 1: 0 GCS shadows cancelled, 0 closed, 0 Xw survived
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Fri Jun 07 12:25:45 2013
Submitted all GCS remote-cache requests
Fri Jun 07 12:26:08 2013
Fix write in gcs resources
Reconfiguration complete
Fri Jun 07 12:26:10 2013
LCK0 started with pid=40, OS id=23632
Fri Jun 07 12:26:10 2013
Starting background process RSMN
Fri Jun 07 12:26:10 2013
RSMN started with pid=41, OS id=23646
ORACLE_BASE not set in environment. It is recommended
that ORACLE_BASE be set in the environment
Reusing ORACLE_BASE from an earlier startup = /u01/app/oracle
Fri Jun 07 12:26:11 2013
ALTER SYSTEM SET local_listener=' (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=135.33.2.13)(PORT=1521))))' SCOPE=MEMORY SID='odsdb1';
ALTER DATABASE MOUNT /* db agent *//* {1:9971:2} */
Fri Jun 07 12:26:11 2013
NOTE: Loaded library: System
Fri Jun 07 12:26:11 2013
SUCCESS: diskgroup DATA was mounted
Fri Jun 07 12:26:11 2013
NOTE: dependency between database odsdb and diskgroup resource ora.DATA.dg is established
Fri Jun 07 12:26:16 2013
Successful mount of redo thread 1, with mount id 3452000551
Database mounted in Shared Mode (CLUSTER_DATABASE=TRUE)
Lost write protection disabled
Completed: ALTER DATABASE MOUNT /* db agent *//* {1:9971:2} */
ALTER DATABASE OPEN /* db agent *//* {1:9971:2} */
Picked broadcast on commit scheme to generate SCNs
Thread 1 advanced to log sequence 58364 (thread open)
Thread 1 opened at log sequence 58364
Current log# 2 seq# 58364 mem# 0: +DATA/odsdb/onlinelog/group_2.265.812288839
Current log# 2 seq# 58364 mem# 1: +DATA/odsdb/onlinelog/group_2.266.812288839
Successful open of redo thread 1
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Fri Jun 07 12:26:21 2013
SMON: enabling cache recovery
Fri Jun 07 12:26:23 2013
minact-scn: Inst 1 is a slave inc#:121 mmon proc-id:23048 status:0x2
minact-scn status: grec-scn:0x0000.00000000 gmin-scn:0x0000.00000000 gcalc-scn:0x0000.00000000
Fri Jun 07 12:26:34 2013
[23651] Successfully onlined Undo Tablespace 2.
Undo initialization finished serial:0 start:2061372614 end:2061384964 diff:12350 (123 seconds)
Verifying file header compatibility for 11g tablespace encryption..
Verifying 11g file header compatibility for tablespace encryption completed
Fri Jun 07 12:26:34 2013
SMON: enabling tx recovery
Database Characterset is ZHS16GBK
No Resource Manager plan active
Starting background process GTX0
Fri Jun 07 12:26:35 2013
GTX0 started with pid=45, OS id=23931
Starting background process RCBG
Fri Jun 07 12:26:35 2013
RCBG started with pid=46, OS id=23933
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
Fri Jun 07 12:26:35 2013
QMNC started with pid=48, OS id=23940
Completed: ALTER DATABASE OPEN /* db agent *//* {1:9971:2} */
Fri Jun 07 12:26:38 2013
Starting background process CJQ0
Fri Jun 07 12:26:38 2013
CJQ0 started with pid=55, OS id=23977
Fri Jun 07 12:27:56 2013
Thread 1 advanced to log sequence 58365 (LGWR switch)
Current log# 1 seq# 58365 mem# 0: +DATA/odsdb/onlinelog/group_1.263.812288839
Current log# 1 seq# 58365 mem# 1: +DATA/odsdb/onlinelog/group_1.264.812288839
Fri Jun 07 12:28:18 2013
Starting background process SMCO
Fri Jun 07 12:28:18 2013
SMCO started with pid=70, OS id=25166
Fri Jun 07 12:29:01 2013
Thread 1 cannot allocate new log, sequence 58366
Trace file /u01/app/oracle/diag/rdbms/odsdb/odsdb1/trace/odsdb1_asmb_32641.trc
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options
ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_2
System name: Linux
Node name: odsdb1
Release: 2.6.18-308.el5
Version: #1 SMP Fri Jan 27 17:17:51 EST 2012
Machine: x86_64
Instance name: odsdb1
Redo thread mounted by this instance: 0 <none>
Oracle process number: 33
Unix process pid: 32641, image: oracle@odsdb1 (ASMB)
*** 2013-05-14 15:37:08.705
*** SESSION ID:(3499.1) 2013-05-14 15:37:08.705
*** CLIENT ID:() 2013-05-14 15:37:08.705
*** SERVICE NAME:() 2013-05-14 15:37:08.705
*** MODULE NAME:() 2013-05-14 15:37:08.705
*** ACTION NAME:() 2013-05-14 15:37:08.705
NOTE: initiating MARK startup
*** 2013-05-14 15:37:16.835
instance health monitoring reports instance shutting down
*** 2013-06-07 12:23:42.700
NOTE: ASMB terminating
ORA-15064: ? ASM ??????
ORA-03113: ?????????
?? ID:
?? ID: 2047 ???: 5
error 15064 detected in background process
ORA-15064: ? ASM ??????
ORA-03113: ?????????
?? ID:
?? ID: 2047 ???: 5
kjzduptcctx: Notifying DIAG for crash event
----- Abridged Call Stack Trace -----
ksedsts()+461<-kjzdssdmp()+267<-kjzduptcctx()+232<-kjzdicrshnfy()+53<-ksuitm()+1332<-ksbrdp()+3344<-opirip()+623<-opidrv()+603<-sou2o()+103<-opimai_real()+266<-ssthrdmain()+252<-main()+201<-__libc_start_main()+244<-_start()+36
----- End of Abridged Call Stack Trace -----
*** 2013-06-07 12:23:42.783
ASMB (ospid: 32641): terminating the instance due to error 15064
/u01/app/grid/diag/asm/+asm/+ASM1/trace/alert_+ASM1.log
NOTE: ASMB process exiting, either shutdown is in progress
NOTE: or foreground connected to ASMB was killed.
Fri Jun 07 12:23:42 2013
NOTE: client exited [14808]
Fri Jun 07 12:23:44 2013
Received an instance abort message from instance 2
Please check instance 2 alert and LMON trace files for detail.
Fri Jun 07 12:23:44 2013
Received an instance abort message from instance 2
Please check instance 2 alert and LMON trace files for detail.
LMD0 (ospid: 31201): terminating the instance due to error 481
Instance terminated by LMD0, pid = 31201
Fri Jun 07 12:24:30 2013
* instance_number obtained from CSS = 1, checking for the existence of node 0...
* node 0 does not exist. instance_number = 1
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Private Interface 'eth1:1' configured from GPnP for use as a private interconnect.
[name='eth1:1', type=1, ip=169.254.37.103, mac=00-26-55-eb-61-89, net=169.254.0.0/16, mask=255.255.0.0, use=haip:cluster_interconnect/62]
Public Interface 'eth0' configured from GPnP for use as a public interface.
[name='eth0', type=1, ip=135.33.2.8, mac=00-26-55-eb-61-88, net=135.33.2.0/27, mask=255.255.255.224, use=public/1]
Picked latch-free SCN scheme 3
Using LOG_ARCHIVE_DEST_1 parameter default value as /u01/app/11.2.0.2/grid/dbs/arch
Autotune of undo retention is turned on.
LICENSE_MAX_USERS = 0
[grid@odsdb1 cssd]$ file core.30481
core.30481: ELF 64-bit LSB core file AMD x86-64, version 1 (SYSV), SVR4-style, from 'ocssd.bin'
[grid@odsdb1 cssd]$ gdb
gdb gdbserver gdbtui
[grid@odsdb1 cssd]$ gdb ocssd.bin core.30481
GNU gdb (GDB) Red Hat Enterprise Linux (7.0.1-42.el5)
Copyright (C) 2009 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-redhat-linux-gnu".
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>...
Reading symbols from /u01/app/11.2.0.2/grid/bin/ocssd.bin...(no debugging symbols found)...done.
[New Thread 30486]
[New Thread 30530]
[New Thread 30526]
[New Thread 30525]
[New Thread 30523]
[New Thread 30522]
[New Thread 30521]
[New Thread 30520]
[New Thread 30519]
[New Thread 30504]
[New Thread 30503]
[New Thread 30495]
[New Thread 30485]
[New Thread 30484]
[New Thread 30483]
[New Thread 30481]
Reading symbols from /u01/app/11.2.0.2/grid/lib/libhasgen11.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libhasgen11.so
Reading symbols from /u01/app/11.2.0.2/grid/lib/libocr11.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libocr11.so
Reading symbols from /u01/app/11.2.0.2/grid/lib/libocrb11.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libocrb11.so
Reading symbols from /u01/app/11.2.0.2/grid/lib/libocrutl11.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libocrutl11.so
Reading symbols from /u01/app/11.2.0.2/grid/lib/libclntsh.so.11.1...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libclntsh.so.11.1
Reading symbols from /u01/app/11.2.0.2/grid/lib/libskgxn2.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libskgxn2.so
Reading symbols from /lib64/libdl.so.2...(no debugging symbols found)...done.
Loaded symbols for /lib64/libdl.so.2
Reading symbols from /lib64/libm.so.6...(no debugging symbols found)...done.
Loaded symbols for /lib64/libm.so.6
Reading symbols from /lib64/libpthread.so.0...(no debugging symbols found)...done.
[Thread debugging using libthread_db enabled]
Loaded symbols for /lib64/libpthread.so.0
Reading symbols from /lib64/libnsl.so.1...(no debugging symbols found)...done.
Loaded symbols for /lib64/libnsl.so.1
Reading symbols from /u01/app/11.2.0.2/grid/lib/libasmclntsh11.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libasmclntsh11.so
Reading symbols from /u01/app/11.2.0.2/grid/lib/libcell11.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libcell11.so
Reading symbols from /u01/app/11.2.0.2/grid/lib/libskgxp11.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libskgxp11.so
Reading symbols from /u01/app/11.2.0.2/grid/lib/libnnz11.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libnnz11.so
Reading symbols from /lib64/libc.so.6...(no debugging symbols found)...done.
Loaded symbols for /lib64/libc.so.6
Reading symbols from /usr/lib64/libaio.so.1...(no debugging symbols found)...done.
Loaded symbols for /usr/lib64/libaio.so.1
Reading symbols from /lib64/ld-linux-x86-64.so.2...(no debugging symbols found)...done.
Loaded symbols for /lib64/ld-linux-x86-64.so.2
Reading symbols from /u01/app/11.2.0.2/grid/lib/libnque11.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libnque11.so
Reading symbols from /opt/oracle/extapi/64/asm/orcl/1/libasm.so...(no debugging symbols found)...done.
Loaded symbols for /opt/oracle/extapi/64/asm/orcl/1/libasm.so
warning: no loadable sections found in added symbol-file system-supplied DSO at 0x7fff505fd000
Core was generated by `/u01/app/11.2.0.2/grid/bin/ocssd.bin '.
Program terminated with signal 6, Aborted.
#0 0x000000369ea30265 in raise () from /lib64/libc.so.6
(gdb) where
#0 0x000000369ea30265 in raise () from /lib64/libc.so.6
#1 0x000000369ea31d10 in abort () from /lib64/libc.so.6
#2 0x00002afc67f9aeda in scls_abort (flags=0) at scls.c:7088
#3 0x000000000040babd in clssscExit (thrd=0x10d325a0, status=clssscreasonSHUTNORM) at clsssc.c:2155
#4 0x0000000000446221 in clssgmClientShutdown (thrd=0x10d325a0, cmInfo=0x10b40090) at clssgmc.c:6415
#5 0x0000000000436707 in clssgmProcClientReqs (thrd=0x10d325a0, clctx=0x10b40630) at clssgmc.c:704
#6 0x0000000000436405 in clssgmclientlsnr (thrd=0x10d325a0) at clssgmc.c:644
#7 0x000000000040ac2f in clssscthrdmain (thrd=0x10d325a0) at clsssc.c:1716
#8 0x000000369fa0677d in start_thread () from /lib64/libpthread.so.0
#9 0x000000369ead49ad in clone () from /lib64/libc.so.6
(gdb)
2013-06-07 12:19:37.377: [ CSSD][1085888832]clssscSelect: cookie accept request 0x10b40630
2013-06-07 12:19:37.377: [ CSSD][1085888832]clssgmAllocProc: (0x2aaab0133ea0) allocated
2013-06-07 12:19:37.379: [ CSSD][1085888832]clssgmClientConnectMsg: properties of cmProc 0x2aaab0133ea0 - 1,2,3,4,5
2013-06-07 12:19:37.379: [ CSSD][1085888832]clssgmClientConnectMsg: Connect from con(0x6ae44fa) proc(0x2aaab0133ea0) pid(14139/14139) version 11:2:1:4, properties: 1,2,3,4,5
2013-06-07 12:19:37.379: [ CSSD][1085888832]clssgmClientConnectMsg: msg flags 0x0000
2013-06-07 12:19:37.384: [ CSSD][1085888832]clssscSelect: cookie accept request 0x2aaab0133ea0
2013-06-07 12:19:37.384: [ CSSD][1085888832]clssscevtypSHRCON: getting client with cmproc 0x2aaab0133ea0
2013-06-07 12:19:37.384: [ CSSD][1085888832]clssgmRegisterClient: proc(69/0x2aaab0133ea0), client(1/0x2aaab010c5c0)
2013-06-07 12:19:37.385: [ CSSD][1085888832]clssgmRegisterShared: grp DBODSDB, mbr 0, type 1
2013-06-07 12:19:37.385: [ CSSD][1085888832]clssgmQueueShare: (0x2aaab0085790) target global grock DBODSDB member 0 type 1 queued from client (0x2aaab010c5c0), global grock DBODSDB, refcount 23
2013-06-07 12:19:37.385: [ CSSD][1085888832]clssgmRegisterShared: global grock DBODSDB member 0 share type 1, refcount 23
2013-06-07 12:19:37.391: [ CSSD][1085888832]clssscSelect: cookie accept request 0x2aaab0133ea0
2013-06-07 12:19:37.391: [ CSSD][1085888832]clssscevtypSHRCON: getting client with cmproc 0x2aaab0133ea0
2013-06-07 12:19:37.391: [ CSSD][1085888832]clssgmRegisterClient: proc(69/0x2aaab0133ea0), client(2/0x2aaab0061f10)
what is the problem
Edited by: 徐振富 on 2013-6-7 下午6:38
Edited by: 徐振富 on 2013-6-7 下午6:45is your ASM instance up?
If not, trying bring up ASM instance up just by itself and see if it throws any error?
Post status of crsctl status cluster -all
Maybe you are looking for
-
Lock/unlock and charging sound.
Yesterday night at 12:35am my lumia 535 phone lock/ unlock and charging sound was not work. So can. I or you please resolve this issue.
-
I have received a message when trying to open Mirosoft Outlook on my Mac - tekking me to delete the Microsoft Database daemon from the startup Items - I do not know how to do this.
-
Supplier Group Creation Error in SRM 7.0
Hello, We are on SRM 7.0, SP 9. When creating a root supplier group using tcode PPOCV_BBP in SRM, we are getting a "DATA_LENGTH_0", "CX_SY_RANGE_OUT_OF_BOUNDS" error in the program "SAPLRHOMDETAIL_PP01". This error happens during the new supplier
-
I have windows server 2008 (64 bit), can I install Crystal Reports & BOE XI 3.1 on the server, will it work without any issue. Reason for asking this is, I installed Oracle 10g Client (32 bit) on the server and stated getting problems, it didn't crea
-
Hr report category custom with from, to date and current period
I have created custom hr report category of type 'Payroll report category'. But it showing from and to date like it showing in 'master data infotype'. How to add that functionality to 'Payroll report category' custom report. thank you