RAC node restarting!
hi
one of our RAC environment keep restarting.
i've disable the init.cssd, init.crs, init.evmd in the /etc/inittab in order to check the logs.
this is the situation:
crsd.log:
2009-02-04 00:09:00.118: [ COMMCRS][9]clsc_connect: (8000000100318640) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_node1_loud))
2009-02-04 00:09:00.132: [ CSSCLNT][1]clsssInitNative: connect failed, rc 9
2009-02-04 00:09:00.134: [ CRSRTI][1]32CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2009-02-04 00:09:08.016: [ CRSD][1]32Daemon Version: 10.2.0.2.0 Active Version: 10.2.0.2.0
2009-02-04 00:09:08.016: [ CRSD][1]32Active Version and Software Version are same
2009-02-04 00:09:08.017: [ CRSMAIN][1]32Initializing OCR
2009-02-04 00:09:08.037: [ OCRRAW][1]proprioo: for disk 0 (/dev/rdsk/ora_ocr_raw), id match (1), my id set (752560621,1028247821) total id sets (1), 1st set
(752560621,1028247821), 2nd set (0,0) my votes (2), total votes (2)
2009-02-04 00:09:08.140: [ CSSCLNT][24]clssgsGroupJoin: CSS has not reached fatal mode.Registration is not yet safe. Retrying
ocssd.log:
[ CSSD]2009-02-03 21:52:08.651 [9] >USER: clssnmHandleUpdate: NODE 1 (node1l) IS ACTIVE MEMBER OF CLUSTER
[ CSSD]2009-02-03 21:52:08.651 [9] >TRACE: clssnmHandleUpdate: diskTimeout set to (200000)ms
[ CSSD]2009-02-03 21:52:08.651 [16] >TRACE: clssnmWaitForAcks: done, msg type(15)
[ CSSD]2009-02-03 21:52:08.651 [16] >TRACE: clssnmDoSyncUpdate: Sync Complete!
[ CSSD]2009-02-03 21:52:08.722 [1] >USER: NMEVENT_SUSPEND [00][00][00][00]
[ CSSD]2009-02-03 21:52:08.724 [17] >TRACE: clssgmReconfigThread: started for reconfig (1)
[ CSSD]2009-02-03 21:52:08.749 [17] >USER: NMEVENT_RECONFIG [00][00][00][02]
[ CSSD]2009-02-03 21:52:08.749 [17] >TRACE: clssgmEstablishConnections: 1 nodes in cluster incarn 1
[ CSSD]2009-02-03 21:52:08.751 [13] >TRACE: clssgmPeerListener: connects done (1/1)
[ CSSD]2009-02-03 21:52:08.752 [17] >TRACE: clssgmEstablishMasterNode: MASTER for 1 is node(1) birth(1)
[ CSSD]2009-02-03 21:52:08.752 [17] >TRACE: clssgmChangeMasterNode: requeued 0 RPCs
[ CSSD]2009-02-03 21:52:08.752 [17] >TRACE: clssgmMasterCMSync: Synchronizing group/lock status
[ CSSD]2009-02-03 21:52:08.752 [17] >TRACE: clssgmMasterSendDBDone: group/lock status synchronization complete
[ CSSD]CLSS-3000: reconfiguration successful, incarnation 1 with 1 nodes
[ CSSD]CLSS-3001: local node number 1, master node number 1
[ CSSD]2009-02-03 21:52:08.753 [17] >TRACE: clssgmReconfigThread: completed for reconfig(1), with status(1)
[ CSSD]2009-02-03 21:52:08.863 [10] >TRACE: clssgmClientConnectMsg: Connect from con(80000001008fd2a0) proc(8000000100ae26a8) pid() proto(10:2:1:1)
[ CSSD]2009-02-03 21:52:08.864 [10] >TRACE: clssgmClientConnectMsg: Connect from con(8000000100ae0128) proc(8000000100ae2a10) pid() proto(10:2:1:1) from con(8000000100aa32c0) proc(8000000100aa5b90) pid() proto(10:2:1:1)
alertlog:
[cssd(2535)]CRS-1601:CSSD Reconfiguration complete. Active nodes are node1 .
2009-02-03 23:55:20.821
[cssd(2575)]CRS-1605:CSSD voting file is online: /dev/rdsk/ora_voting_raw. Detai ls in /work/crs/product/10.2/crs/log/lourmel/cssd/ocssd.log.
2009-02-03 23:55:28.376
evmd.log:
Oracle Database 10g CRS Release 10.2.0.2.0 Production Copyright 1996, 2004, Oracle. All rights reserved
2009-02-04 00:08:58.331: [ EVMD][1]32EVMD waiting for CSS to be ready err = 3
2009-02-04 00:08:59.939: [ COMMCRS][9]clsc_connect: (800000010007d658) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_node1_loud))
2009-02-04 00:08:59.946: [ CSSCLNT][1]clsssInitNative: connect failed, rc 9
2009-02-04 00:08:59.948: [ EVMD][1]32EVMD waiting for CSS to be ready err = 3
2009-02-04 00:09:07.596: [ CSSCLNT][1]clssgsGroupJoin: CSS has not reached fatal mode.Registration is not yet safe. Retrying
syslog:
Feb 4 00:08:41 lourmel syslog: Oracle Cluster Ready Services starting up automatically.
Feb 4 00:08:45 lourmel sfd[2153]: starting the daemon.
Feb 4 00:08:45 lourmel su: + tty?? root-orac
Feb 4 00:08:45 lourmel krsd[2152]: Delay time is 300 seconds
Feb 4 00:08:43 lourmel syslog: Oracle Cluster Ready Services starting up automatically.
Feb 4 00:08:52 lourmel above message repeats 2 times
Feb 4 00:08:52 lourmel syslog: Cluster Ready Services completed waiting on dependencies.
Feb 4 00:08:53 lourmel syslog: Running CRSD with TZ =
when i checked(befor the restart) the command crs_stat i got the message:
ORA-0184: Cannot communicate wirh CRS
crsctl check crs gives us:
Failure 1 contacting CSS daemon
Cannot communicate with CRS
Cannot communicate with EVM
as i said befor, the machine always restarting
anyone have an idea?? please
Dear All,
I recently upgrade the Few RAC setups with Oracle 10g Patchset 3 (10.2.0.4) on Linux Servers
In one of the RAC setup, found servers are rebooting daily. The same setup was working fine and problem started only after applying the Patchset. Checked all the logs and Found nothing relevant.
Then i checked the things which added with this Patchset.
The Most interesting found , Oracle Added a New Daemon- oprocd.
# ps -efl | grep oprocd
4 S root 6440 6063 0 -40 - - 2114 - Mar03 ? 00:00:00 /opt/oracle/product/10.2.0/crs/bin/oprocd.bin run -t 1000 -m 500 -hsi 5:10:50:75:90 -f
These are Interesting Points about above line
1.This Process is running by root user
2. With Highest Priority -40
3. Probing every Seconds (t 1000)
4. waiting CPU response for 500 Milliseconds ( -m 500 means margin time is 500 Milli Seconds)
5. Process status is Fatal (-f)
Now I am concluding these points- This daemon will probe cpu every second and wait for response within 500 Mill seconds. If in the 500 Milli second not getting any response from the cpu, will assume the CPU is hang and try to Reboot the Machine. The OPERATING SYSTEM will not get enough time to write the system logs and server reboots.
So the solution is increase the Margin time for 500 Milli second to 10 seconds.
These are following steps to increase the Margin time.
Please Remember- The Modification process need Downtime and You need to stop cluster service in all member nodes.
1. Stop The CRS Process
#crsctl stop crs
#<CRS_HOME>/bin/oprocd stop
2. Ensure that Clusterware stack is down and not running
#ps -ef |egrep "crsd.bin|ocssd.bin|evmd.bin|oprocd"
This should return no processes.
3. From one node of the cluster, change the value of the "diagwait" parameter to 13 by issuing the command as root:
#crsctl set css diagwait 13 -force
4. Check if diagwait is successfully set.
#crsctl get css diagwait
5. Restart the Oracle Clusterware on all the nodes by executing:
#crsctl start crs
(Note- If facing any problem to restarting the CRS services, ASM and Database, You can reboot the Nodes.The Cluster and Database will come automatically due to init startup scripts.)
6. The oprocd daemon process will show with -m 10000
# ps -efl| grep oprocd
# 4 S root 6440 6063 0 -40 - - 2114 - Feb02 ? 00:00:00 /opt/oracle/product/10.2.0/crs/bin/oprocd.bin run -t 1000 -m 10000 -hsi 5:10:50:75:90 -f
Rollback Procedure-
If You need to unset oprocd value due any reason
#crsctl unset css diagwait
I am confident, The abnormal RAC Node restart problem will solve with this workaround.
Regards,
Sumit
Bangalore,India
Similar Messages
-
Hello everyone,
I have met an error,that is our RAC node auto restart with below messages.
#/u01/app/oracle/diag/rdbms/odsdb/odsdb1/trace/alert_odsdb1.log
Fri Jun 07 12:23:42 2013
Thread 1 cannot allocate new log, sequence 58363
Checkpoint not complete
Current log# 2 seq# 58362 mem# 0: +DATA/odsdb/onlinelog/group_2.265.812288839
Current log# 2 seq# 58362 mem# 1: +DATA/odsdb/onlinelog/group_2.266.812288839
Fri Jun 07 12:23:42 2013
NOTE: ASMB terminating
Errors in file /u01/app/oracle/diag/rdbms/odsdb/odsdb1/trace/odsdb1_asmb_32641.trc:
ORA-15064: ? ASM ??????
ORA-03113: ?????????
?? ID:
?? ID: 2047 ???: 5
Errors in file /u01/app/oracle/diag/rdbms/odsdb/odsdb1/trace/odsdb1_asmb_32641.trc:
ORA-15064: ? ASM ??????
ORA-03113: ?????????
?? ID:
?? ID: 2047 ???: 5
ASMB (ospid: 32641): terminating the instance due to error 15064
Fri Jun 07 12:23:44 2013
ORA-1092 : opitsk aborting process
Fri Jun 07 12:23:46 2013
ORA-1092 : opitsk aborting process
Instance terminated by ASMB, pid = 32641
Fri Jun 07 12:25:02 2013
Starting ORACLE instance (normal)
Fri Jun 07 12:25:23 2013
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Private Interface 'eth1:1' configured from GPnP for use as a private interconnect.
[name='eth1:1', type=1, ip=169.254.37.103, mac=00-26-55-eb-61-89, net=169.254.0.0/16, mask=255.255.0.0, use=haip:cluster_interconnect/62]
Public Interface 'eth0' configured from GPnP for use as a public interface.
[name='eth0', type=1, ip=135.33.2.8, mac=00-26-55-eb-61-88, net=135.33.2.0/27, mask=255.255.255.224, use=public/1]
Public Interface 'eth0:1' configured from GPnP for use as a public interface.
[name='eth0:1', type=1, ip=135.33.2.13, mac=00-26-55-eb-61-88, net=135.33.2.0/27, mask=255.255.255.224, use=public/1]
Picked latch-free SCN scheme 3
Using LOG_ARCHIVE_DEST_1 parameter default value as /u01/app/oracle/product/11.2.0/dbhome_2/dbs/arch
Autotune of undo retention is turned on.
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options.
ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_2
System name: Linux
Node name: odsdb1
Release: 2.6.18-308.el5
Version: #1 SMP Fri Jan 27 17:17:51 EST 2012
Machine: x86_64
Using parameter settings in server-side pfile /u01/app/oracle/product/11.2.0/dbhome_2/dbs/initodsdb1.ora
System parameters with non-default values:
processes = 4500
sessions = 6784
event = ""
spfile = "+DATA/odsdb/spfileodsdb.ora"
nls_language = "SIMPLIFIED CHINESE"
nls_territory = "CHINA"
memory_target = 170G
control_files = "+DATA/odsdb/controlfile/current.262.812288837"
control_files = "+DATA/odsdb/controlfile/current.261.812288837"
db_block_size = 8192
compatible = "11.2.0.0.0"
db_files = 4096
cluster_database = TRUE
db_create_file_dest = "+DATA"
db_recovery_file_dest = ""
db_recovery_file_dest_size= 38820M
thread = 1
undo_tablespace = "UNDOTBS1"
instance_number = 1
remote_login_passwordfile= "EXCLUSIVE"
db_domain = ""
dispatchers = "(PROTOCOL=TCP) (SERVICE=odsdbXDB)"
remote_listener = "odsdb-cluster-scan:1521"
job_queue_processes = 1000
audit_file_dest = "/u01/app/oracle/admin/odsdb/adump"
audit_trail = "DB"
db_name = "odsdb"
open_cursors = 300
diagnostic_dest = "/u01/app/oracle"
Cluster communication is configured to use the following interface(s) for this instance
169.254.37.103
cluster interconnect IPC version:Oracle UDP/IP (generic)
IPC Vendor 1 proto 2
Fri Jun 07 12:25:33 2013
PMON started with pid=2, OS id=22959
Fri Jun 07 12:25:33 2013
PSP0 started with pid=3, OS id=22962
Fri Jun 07 12:25:34 2013
VKTM started with pid=4, OS id=22971 at elevated priority
VKTM running at (1)millisec precision with DBRM quantum (100)ms
Fri Jun 07 12:25:34 2013
GEN0 started with pid=5, OS id=22977
Fri Jun 07 12:25:34 2013
DIAG started with pid=6, OS id=22979
Fri Jun 07 12:25:35 2013
DBRM started with pid=7, OS id=22981
Fri Jun 07 12:25:35 2013
PING started with pid=8, OS id=22983
Fri Jun 07 12:25:35 2013
ACMS started with pid=9, OS id=22985
Fri Jun 07 12:25:35 2013
DIA0 started with pid=10, OS id=22987
Fri Jun 07 12:25:35 2013
LMON started with pid=11, OS id=22989
Fri Jun 07 12:25:35 2013
LMD0 started with pid=12, OS id=22991
* Load Monitor used for high load check
* New Low - High Load Threshold Range = [61440 - 81920]
Fri Jun 07 12:25:35 2013
LMS0 started with pid=13, OS id=22994 at elevated priority
Fri Jun 07 12:25:35 2013
LMS1 started with pid=14, OS id=22998 at elevated priority
Fri Jun 07 12:25:35 2013
LMS2 started with pid=15, OS id=23002 at elevated priority
Fri Jun 07 12:25:35 2013
LMS3 started with pid=16, OS id=23006 at elevated priority
Fri Jun 07 12:25:35 2013
RMS0 started with pid=17, OS id=23010
Fri Jun 07 12:25:35 2013
LMHB started with pid=18, OS id=23013
Fri Jun 07 12:25:35 2013
MMAN started with pid=19, OS id=23015
Fri Jun 07 12:25:35 2013
DBW0 started with pid=20, OS id=23017
Fri Jun 07 12:25:35 2013
DBW1 started with pid=21, OS id=23019
Fri Jun 07 12:25:35 2013
DBW2 started with pid=22, OS id=23022
Fri Jun 07 12:25:35 2013
DBW3 started with pid=23, OS id=23024
Fri Jun 07 12:25:35 2013
DBW4 started with pid=24, OS id=23026
Fri Jun 07 12:25:35 2013
DBW5 started with pid=25, OS id=23028
Fri Jun 07 12:25:35 2013
DBW6 started with pid=26, OS id=23031
Fri Jun 07 12:25:35 2013
DBW7 started with pid=27, OS id=23033
Fri Jun 07 12:25:35 2013
LGWR started with pid=28, OS id=23035
Fri Jun 07 12:25:35 2013
CKPT started with pid=29, OS id=23037
Fri Jun 07 12:25:35 2013
SMON started with pid=30, OS id=23039
Fri Jun 07 12:25:35 2013
RECO started with pid=31, OS id=23041
Fri Jun 07 12:25:35 2013
RBAL started with pid=32, OS id=23043
Fri Jun 07 12:25:35 2013
ASMB started with pid=33, OS id=23045
Fri Jun 07 12:25:35 2013
MMON started with pid=34, OS id=23048
Fri Jun 07 12:25:35 2013
MMNL started with pid=35, OS id=23052
Fri Jun 07 12:25:35 2013
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
NOTE: initiating MARK startup
starting up 1 shared server(s) ...
Starting background process MARK
Fri Jun 07 12:25:35 2013
MARK started with pid=37, OS id=23056
NOTE: MARK has subscribed
lmon registered with NM - instance number 1 (internal mem no 0)
Reconfiguration started (old inc 0, new inc 119)
List of instances:
1 2 (myinst: 1)
Global Resource Directory frozen
* allocate domain 0, invalid = TRUE
Communication channels reestablished
* domain 0 valid according to instance 2
* domain 0 valid = 1 according to instance 2
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
LMS 3: 0 GCS shadows cancelled, 0 closed, 0 Xw survived
LMS 1: 0 GCS shadows cancelled, 0 closed, 0 Xw survived
LMS 2: 0 GCS shadows cancelled, 0 closed, 0 Xw survived
LMS 0: 0 GCS shadows cancelled, 0 closed, 0 Xw survived
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Submitted all GCS remote-cache requests
Fix write in gcs resources
Reconfiguration started (old inc 119, new inc 121)
List of instances:
1 2 (myinst: 1)
Nested reconfiguration detected.
Global Resource Directory frozen
Communication channels reestablished
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
LMS 0: 0 GCS shadows cancelled, 0 closed, 0 Xw survived
LMS 3: 0 GCS shadows cancelled, 0 closed, 0 Xw survived
LMS 2: 0 GCS shadows cancelled, 0 closed, 0 Xw survived
LMS 1: 0 GCS shadows cancelled, 0 closed, 0 Xw survived
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Fri Jun 07 12:25:45 2013
Submitted all GCS remote-cache requests
Fri Jun 07 12:26:08 2013
Fix write in gcs resources
Reconfiguration complete
Fri Jun 07 12:26:10 2013
LCK0 started with pid=40, OS id=23632
Fri Jun 07 12:26:10 2013
Starting background process RSMN
Fri Jun 07 12:26:10 2013
RSMN started with pid=41, OS id=23646
ORACLE_BASE not set in environment. It is recommended
that ORACLE_BASE be set in the environment
Reusing ORACLE_BASE from an earlier startup = /u01/app/oracle
Fri Jun 07 12:26:11 2013
ALTER SYSTEM SET local_listener=' (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=135.33.2.13)(PORT=1521))))' SCOPE=MEMORY SID='odsdb1';
ALTER DATABASE MOUNT /* db agent *//* {1:9971:2} */
Fri Jun 07 12:26:11 2013
NOTE: Loaded library: System
Fri Jun 07 12:26:11 2013
SUCCESS: diskgroup DATA was mounted
Fri Jun 07 12:26:11 2013
NOTE: dependency between database odsdb and diskgroup resource ora.DATA.dg is established
Fri Jun 07 12:26:16 2013
Successful mount of redo thread 1, with mount id 3452000551
Database mounted in Shared Mode (CLUSTER_DATABASE=TRUE)
Lost write protection disabled
Completed: ALTER DATABASE MOUNT /* db agent *//* {1:9971:2} */
ALTER DATABASE OPEN /* db agent *//* {1:9971:2} */
Picked broadcast on commit scheme to generate SCNs
Thread 1 advanced to log sequence 58364 (thread open)
Thread 1 opened at log sequence 58364
Current log# 2 seq# 58364 mem# 0: +DATA/odsdb/onlinelog/group_2.265.812288839
Current log# 2 seq# 58364 mem# 1: +DATA/odsdb/onlinelog/group_2.266.812288839
Successful open of redo thread 1
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Fri Jun 07 12:26:21 2013
SMON: enabling cache recovery
Fri Jun 07 12:26:23 2013
minact-scn: Inst 1 is a slave inc#:121 mmon proc-id:23048 status:0x2
minact-scn status: grec-scn:0x0000.00000000 gmin-scn:0x0000.00000000 gcalc-scn:0x0000.00000000
Fri Jun 07 12:26:34 2013
[23651] Successfully onlined Undo Tablespace 2.
Undo initialization finished serial:0 start:2061372614 end:2061384964 diff:12350 (123 seconds)
Verifying file header compatibility for 11g tablespace encryption..
Verifying 11g file header compatibility for tablespace encryption completed
Fri Jun 07 12:26:34 2013
SMON: enabling tx recovery
Database Characterset is ZHS16GBK
No Resource Manager plan active
Starting background process GTX0
Fri Jun 07 12:26:35 2013
GTX0 started with pid=45, OS id=23931
Starting background process RCBG
Fri Jun 07 12:26:35 2013
RCBG started with pid=46, OS id=23933
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
Fri Jun 07 12:26:35 2013
QMNC started with pid=48, OS id=23940
Completed: ALTER DATABASE OPEN /* db agent *//* {1:9971:2} */
Fri Jun 07 12:26:38 2013
Starting background process CJQ0
Fri Jun 07 12:26:38 2013
CJQ0 started with pid=55, OS id=23977
Fri Jun 07 12:27:56 2013
Thread 1 advanced to log sequence 58365 (LGWR switch)
Current log# 1 seq# 58365 mem# 0: +DATA/odsdb/onlinelog/group_1.263.812288839
Current log# 1 seq# 58365 mem# 1: +DATA/odsdb/onlinelog/group_1.264.812288839
Fri Jun 07 12:28:18 2013
Starting background process SMCO
Fri Jun 07 12:28:18 2013
SMCO started with pid=70, OS id=25166
Fri Jun 07 12:29:01 2013
Thread 1 cannot allocate new log, sequence 58366
Trace file /u01/app/oracle/diag/rdbms/odsdb/odsdb1/trace/odsdb1_asmb_32641.trc
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options
ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_2
System name: Linux
Node name: odsdb1
Release: 2.6.18-308.el5
Version: #1 SMP Fri Jan 27 17:17:51 EST 2012
Machine: x86_64
Instance name: odsdb1
Redo thread mounted by this instance: 0 <none>
Oracle process number: 33
Unix process pid: 32641, image: oracle@odsdb1 (ASMB)
*** 2013-05-14 15:37:08.705
*** SESSION ID:(3499.1) 2013-05-14 15:37:08.705
*** CLIENT ID:() 2013-05-14 15:37:08.705
*** SERVICE NAME:() 2013-05-14 15:37:08.705
*** MODULE NAME:() 2013-05-14 15:37:08.705
*** ACTION NAME:() 2013-05-14 15:37:08.705
NOTE: initiating MARK startup
*** 2013-05-14 15:37:16.835
instance health monitoring reports instance shutting down
*** 2013-06-07 12:23:42.700
NOTE: ASMB terminating
ORA-15064: ? ASM ??????
ORA-03113: ?????????
?? ID:
?? ID: 2047 ???: 5
error 15064 detected in background process
ORA-15064: ? ASM ??????
ORA-03113: ?????????
?? ID:
?? ID: 2047 ???: 5
kjzduptcctx: Notifying DIAG for crash event
----- Abridged Call Stack Trace -----
ksedsts()+461<-kjzdssdmp()+267<-kjzduptcctx()+232<-kjzdicrshnfy()+53<-ksuitm()+1332<-ksbrdp()+3344<-opirip()+623<-opidrv()+603<-sou2o()+103<-opimai_real()+266<-ssthrdmain()+252<-main()+201<-__libc_start_main()+244<-_start()+36
----- End of Abridged Call Stack Trace -----
*** 2013-06-07 12:23:42.783
ASMB (ospid: 32641): terminating the instance due to error 15064
/u01/app/grid/diag/asm/+asm/+ASM1/trace/alert_+ASM1.log
NOTE: ASMB process exiting, either shutdown is in progress
NOTE: or foreground connected to ASMB was killed.
Fri Jun 07 12:23:42 2013
NOTE: client exited [14808]
Fri Jun 07 12:23:44 2013
Received an instance abort message from instance 2
Please check instance 2 alert and LMON trace files for detail.
Fri Jun 07 12:23:44 2013
Received an instance abort message from instance 2
Please check instance 2 alert and LMON trace files for detail.
LMD0 (ospid: 31201): terminating the instance due to error 481
Instance terminated by LMD0, pid = 31201
Fri Jun 07 12:24:30 2013
* instance_number obtained from CSS = 1, checking for the existence of node 0...
* node 0 does not exist. instance_number = 1
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Private Interface 'eth1:1' configured from GPnP for use as a private interconnect.
[name='eth1:1', type=1, ip=169.254.37.103, mac=00-26-55-eb-61-89, net=169.254.0.0/16, mask=255.255.0.0, use=haip:cluster_interconnect/62]
Public Interface 'eth0' configured from GPnP for use as a public interface.
[name='eth0', type=1, ip=135.33.2.8, mac=00-26-55-eb-61-88, net=135.33.2.0/27, mask=255.255.255.224, use=public/1]
Picked latch-free SCN scheme 3
Using LOG_ARCHIVE_DEST_1 parameter default value as /u01/app/11.2.0.2/grid/dbs/arch
Autotune of undo retention is turned on.
LICENSE_MAX_USERS = 0
[grid@odsdb1 cssd]$ file core.30481
core.30481: ELF 64-bit LSB core file AMD x86-64, version 1 (SYSV), SVR4-style, from 'ocssd.bin'
[grid@odsdb1 cssd]$ gdb
gdb gdbserver gdbtui
[grid@odsdb1 cssd]$ gdb ocssd.bin core.30481
GNU gdb (GDB) Red Hat Enterprise Linux (7.0.1-42.el5)
Copyright (C) 2009 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-redhat-linux-gnu".
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>...
Reading symbols from /u01/app/11.2.0.2/grid/bin/ocssd.bin...(no debugging symbols found)...done.
[New Thread 30486]
[New Thread 30530]
[New Thread 30526]
[New Thread 30525]
[New Thread 30523]
[New Thread 30522]
[New Thread 30521]
[New Thread 30520]
[New Thread 30519]
[New Thread 30504]
[New Thread 30503]
[New Thread 30495]
[New Thread 30485]
[New Thread 30484]
[New Thread 30483]
[New Thread 30481]
Reading symbols from /u01/app/11.2.0.2/grid/lib/libhasgen11.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libhasgen11.so
Reading symbols from /u01/app/11.2.0.2/grid/lib/libocr11.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libocr11.so
Reading symbols from /u01/app/11.2.0.2/grid/lib/libocrb11.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libocrb11.so
Reading symbols from /u01/app/11.2.0.2/grid/lib/libocrutl11.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libocrutl11.so
Reading symbols from /u01/app/11.2.0.2/grid/lib/libclntsh.so.11.1...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libclntsh.so.11.1
Reading symbols from /u01/app/11.2.0.2/grid/lib/libskgxn2.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libskgxn2.so
Reading symbols from /lib64/libdl.so.2...(no debugging symbols found)...done.
Loaded symbols for /lib64/libdl.so.2
Reading symbols from /lib64/libm.so.6...(no debugging symbols found)...done.
Loaded symbols for /lib64/libm.so.6
Reading symbols from /lib64/libpthread.so.0...(no debugging symbols found)...done.
[Thread debugging using libthread_db enabled]
Loaded symbols for /lib64/libpthread.so.0
Reading symbols from /lib64/libnsl.so.1...(no debugging symbols found)...done.
Loaded symbols for /lib64/libnsl.so.1
Reading symbols from /u01/app/11.2.0.2/grid/lib/libasmclntsh11.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libasmclntsh11.so
Reading symbols from /u01/app/11.2.0.2/grid/lib/libcell11.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libcell11.so
Reading symbols from /u01/app/11.2.0.2/grid/lib/libskgxp11.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libskgxp11.so
Reading symbols from /u01/app/11.2.0.2/grid/lib/libnnz11.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libnnz11.so
Reading symbols from /lib64/libc.so.6...(no debugging symbols found)...done.
Loaded symbols for /lib64/libc.so.6
Reading symbols from /usr/lib64/libaio.so.1...(no debugging symbols found)...done.
Loaded symbols for /usr/lib64/libaio.so.1
Reading symbols from /lib64/ld-linux-x86-64.so.2...(no debugging symbols found)...done.
Loaded symbols for /lib64/ld-linux-x86-64.so.2
Reading symbols from /u01/app/11.2.0.2/grid/lib/libnque11.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libnque11.so
Reading symbols from /opt/oracle/extapi/64/asm/orcl/1/libasm.so...(no debugging symbols found)...done.
Loaded symbols for /opt/oracle/extapi/64/asm/orcl/1/libasm.so
warning: no loadable sections found in added symbol-file system-supplied DSO at 0x7fff505fd000
Core was generated by `/u01/app/11.2.0.2/grid/bin/ocssd.bin '.
Program terminated with signal 6, Aborted.
#0 0x000000369ea30265 in raise () from /lib64/libc.so.6
(gdb) where
#0 0x000000369ea30265 in raise () from /lib64/libc.so.6
#1 0x000000369ea31d10 in abort () from /lib64/libc.so.6
#2 0x00002afc67f9aeda in scls_abort (flags=0) at scls.c:7088
#3 0x000000000040babd in clssscExit (thrd=0x10d325a0, status=clssscreasonSHUTNORM) at clsssc.c:2155
#4 0x0000000000446221 in clssgmClientShutdown (thrd=0x10d325a0, cmInfo=0x10b40090) at clssgmc.c:6415
#5 0x0000000000436707 in clssgmProcClientReqs (thrd=0x10d325a0, clctx=0x10b40630) at clssgmc.c:704
#6 0x0000000000436405 in clssgmclientlsnr (thrd=0x10d325a0) at clssgmc.c:644
#7 0x000000000040ac2f in clssscthrdmain (thrd=0x10d325a0) at clsssc.c:1716
#8 0x000000369fa0677d in start_thread () from /lib64/libpthread.so.0
#9 0x000000369ead49ad in clone () from /lib64/libc.so.6
(gdb)
2013-06-07 12:19:37.377: [ CSSD][1085888832]clssscSelect: cookie accept request 0x10b40630
2013-06-07 12:19:37.377: [ CSSD][1085888832]clssgmAllocProc: (0x2aaab0133ea0) allocated
2013-06-07 12:19:37.379: [ CSSD][1085888832]clssgmClientConnectMsg: properties of cmProc 0x2aaab0133ea0 - 1,2,3,4,5
2013-06-07 12:19:37.379: [ CSSD][1085888832]clssgmClientConnectMsg: Connect from con(0x6ae44fa) proc(0x2aaab0133ea0) pid(14139/14139) version 11:2:1:4, properties: 1,2,3,4,5
2013-06-07 12:19:37.379: [ CSSD][1085888832]clssgmClientConnectMsg: msg flags 0x0000
2013-06-07 12:19:37.384: [ CSSD][1085888832]clssscSelect: cookie accept request 0x2aaab0133ea0
2013-06-07 12:19:37.384: [ CSSD][1085888832]clssscevtypSHRCON: getting client with cmproc 0x2aaab0133ea0
2013-06-07 12:19:37.384: [ CSSD][1085888832]clssgmRegisterClient: proc(69/0x2aaab0133ea0), client(1/0x2aaab010c5c0)
2013-06-07 12:19:37.385: [ CSSD][1085888832]clssgmRegisterShared: grp DBODSDB, mbr 0, type 1
2013-06-07 12:19:37.385: [ CSSD][1085888832]clssgmQueueShare: (0x2aaab0085790) target global grock DBODSDB member 0 type 1 queued from client (0x2aaab010c5c0), global grock DBODSDB, refcount 23
2013-06-07 12:19:37.385: [ CSSD][1085888832]clssgmRegisterShared: global grock DBODSDB member 0 share type 1, refcount 23
2013-06-07 12:19:37.391: [ CSSD][1085888832]clssscSelect: cookie accept request 0x2aaab0133ea0
2013-06-07 12:19:37.391: [ CSSD][1085888832]clssscevtypSHRCON: getting client with cmproc 0x2aaab0133ea0
2013-06-07 12:19:37.391: [ CSSD][1085888832]clssgmRegisterClient: proc(69/0x2aaab0133ea0), client(2/0x2aaab0061f10)
what is the problem
Edited by: 徐振富 on 2013-6-7 下午6:38
Edited by: 徐振富 on 2013-6-7 下午6:45is your ASM instance up?
If not, trying bring up ASM instance up just by itself and see if it throws any error?
Post status of crsctl status cluster -all -
RAC node outage causes SOA Suite 10.1.3.4 BPEL failure
Using weblogic 9.2 and the SOA Suite 10.1.3.4. We use a 10g Oracle RAC ( 2 nodes ); the WL cluster has a multi data source of 2 pools, each pool pointing to a single node in the rac, each pool deployed to the cluster, and the multi data source in load-balancing mode.
So the other night, one of the db nodes had a hardware failure ( ironically, with a remote monitoring / management card ). Annoying, but it should not have caused the BPEL servers to be in "FAILED NOT RESTARTABLE" status the next morning.
Jun 9, 2009 12:10:07 AM EDT> <Warning> <JDBC> <BEA-001129> <Received exception while creating connection for pool "esbaqds2": Io exception: The Network Adapter could not establish the connection>
SEVERE: Destroying JMSDequeuer failed
oracle.jms.AQjmsException: Connection has been administratively destroyed. Reconnect.
at oracle.jms.AQjmsSession.preClose(AQjmsSession.java:980)
at oracle.jms.AQjmsObject.close(AQjmsObject.java:409)
at oracle.jms.AQjmsSession.close(AQjmsSession.java:1020)
at oracle.tip.esb.server.dispatch.JMSDequeuer.destroy(JMSDequeuer.java:419)
at oracle.tip.esb.server.dispatch.JMSDequeuer.destroyWithoutUnsubscribing(JMSDequeuer.java:395)
at oracle.tip.esb.server.dispatch.JMSDequeuer.dequeue(JMSDequeuer.java:175)
at oracle.tip.esb.server.dispatch.agent.ESBWork.process(ESBWork.java:174)
at oracle.tip.esb.server.dispatch.agent.ESBWork.run(ESBWork.java:132)
at weblogic.connector.security.layer.WorkImpl.runIt(WorkImpl.java:108)
at weblogic.connector.security.layer.WorkImpl.run(WorkImpl.java:44)
at weblogic.connector.work.WorkRequest.run(WorkRequest.java:93)
at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
followed by a 2 GB log file containing 1.3 million iterations of the following within the next 10 minutes before the managed servers failed.
java.lang.NullPointerException
at java.lang.String.<init>(String.java:144)
at oracle.tip.esb.server.dispatch.JMSDequeuer.dequeue(JMSDequeuer.java:168)
at oracle.tip.esb.server.dispatch.agent.ESBWork.process(ESBWork.java:174)
at oracle.tip.esb.server.dispatch.agent.ESBWork.run(ESBWork.java:132)
at weblogic.connector.security.layer.WorkImpl.runIt(WorkImpl.java:108)
at weblogic.connector.security.layer.WorkImpl.run(WorkImpl.java:44)
at weblogic.connector.work.WorkRequest.run(WorkRequest.java:93)
at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
Both managed instances of the BPEL cluster failed, even though the 1st node of the Oracle RAC was still available.
Our 10.3 cluster, also using multi data sources to the same RAC for the OSB components, simply went on about its business using the remaining rac node pool.
Seems to be a single point of failure...We haven't changed the JDBC connection string yet, but we did run a test in the same environment while Oracle support considers the situation.
For the test, we simply shutdown one node of the RAC and watched to see what happens. Within the space of a minute, the JDBC "Failed Reserve Request Count" was increasing by thousands on every refresh of the screen. We restarted the RAC node after 5 minutes, by which time the "Failed Reserve Request Count" was over 190,000
The 2 BPEL managed servers remained in Running status and each created a 660 MB log file within that 5 minutes. In the original outage, the nodes were down for about 15 minutes. Most of the logging is being generated from within the oracle.tip.esb classes, not by the weblogic classes. It looks like that once the pool pointing to the downed RAC node becomes disabled, the Oracle BPEL code is still trying to use it even though the multi-source JNDI is the published lookup:
INFO: JMSDequeuer::createConnection - AQ Topics
java.sql.SQLException: weblogic.common.ResourceException:
esbaqds(esbaqds2): Pool esbaqds2 is disabled, cannot allocate resources to applications..
esbaqds(esbaqds1): Pool esbaqds1 is disabled, cannot allocate resources to applications..
at weblogic.jdbc.common.internal.JDBCUtil.wrapAndThrowResourceException(JDBCUtil.java:250)
at weblogic.jdbc.common.internal.RmiDataSource.getPoolConnection(RmiDataSource.java:348)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:364)
at oracle.tip.esb.server.dispatch.JMSDequeuer.createAQConnection(JMSDequeuer.java:559)
at oracle.tip.esb.server.dispatch.JMSDequeuer.dequeue(JMSDequeuer.java:159)
at oracle.tip.esb.server.dispatch.agent.ESBWork.process(ESBWork.java:174)
at oracle.tip.esb.server.dispatch.agent.ESBWork.run(ESBWork.java:132)
at weblogic.connector.security.layer.WorkImpl.runIt(WorkImpl.java:108)
at weblogic.connector.security.layer.WorkImpl.run(WorkImpl.java:44)
at weblogic.connector.work.WorkRequest.run(WorkRequest.java:93)
at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
Caused by: weblogic.common.ResourceException:
esbaqds(esbaqds2): Pool esbaqds2 is disabled, cannot allocate resources to applications..
esbaqds(esbaqds1): Pool esbaqds1 is disabled, cannot allocate resources to applications..
at weblogic.jdbc.common.internal.MultiPool.searchLoadBalance(MultiPool.java:331)
at weblogic.jdbc.common.internal.MultiPool.findPool(MultiPool.java:202)
at weblogic.jdbc.common.internal.ConnectionPoolManager.reserve(ConnectionPoolManager.java:77)
at weblogic.jdbc.common.internal.RmiDataSource.getPoolConnection(RmiDataSource.java:346)
... 11 more
SEVERE: Failed to process deferred message
oracle.tip.esb.server.dispatch.QueueHandlerException: Error creating "weblogic.common.ResourceException: No good connections available."
at oracle.tip.esb.server.dispatch.JMSDequeuer.createAQConnection(JMSDequeuer.java:661)
at oracle.tip.esb.server.dispatch.JMSDequeuer.dequeue(JMSDequeuer.java:159)
at oracle.tip.esb.server.dispatch.agent.ESBWork.process(ESBWork.java:174)
at oracle.tip.esb.server.dispatch.agent.ESBWork.run(ESBWork.java:132)
at weblogic.connector.security.layer.WorkImpl.runIt(WorkImpl.java:108)
at weblogic.connector.security.layer.WorkImpl.run(WorkImpl.java:44)
at weblogic.connector.work.WorkRequest.run(WorkRequest.java:93)
at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181) -
Exception while failing over to 2nd RAC Node
We are using Weblogic 10.3.4. Our setup is that we have a Web Application (A tapestry front end Web UI) and EJb 2.1 back-end talking to the Oracle database. The EJB’s are CMP. Our product always was just stand alone and it wasn’t until this release we needed to make it work with RAC. To get this to work we followed the model of having a Multidatasource with datasources pointing to our RAC nodes. We have two types of datasources that we use persistent and non-persistent. And we are using the Oracle thin driver – non-XA for RAC Service Instances, supporting global transactions.
When we do failover to the 2nd node we get a nasty exception in our GUI but after logging out and logging back it we are fine.
My question is that I assumed I shouldn't have to restart our web-application and it should have stayed up ?? Or is there something wrong with our setup ?
Thanks,
IanShowing us the exception and/or the error messages at the server might help...
Note that failing over does not save any ongoing connection or transaction that
had been to the dead RAC node... Does your web-app get-use-close JDBC
connections on a per-user-invoke basis, or does it hold onto connections?
Joe -
RAC database restarting by itself
All,
I have a 2 node Win 2003 64bit cluster using ASM.
Node 1 fell over yesterday and restarted about 2 minutes later. I know why it fell over (there's another patch to be applied). Is there somewhere within the RAC config to say to RAC to restart the Node 1 instance after a certain time? I can't find anything in the RAC logs (css, evm & crs). Any ideas?
Many thanks
Vic> Is there somewhere within the RAC config to say to RAC to restart the Node 1 instance after a certain time?
No. It is the purpose of each cluster node to be part of the collective. So there is not twiddling of thumbs on the part of a node outside the cluster. It will attempt to rejoin it now and not later. As it should. (and resistance is futile)
The CRS service is configured to autostart when a node boots. When CRS successfully starts, it will then start all services it has on that node. Node apps, ASM, RAC, etc.
That is the way it works and should work.. not sure what you are expecting by suggesting that it should only join again after a certain time? -
Hi all,
I am woserking on two node rac environment.One of my rac node is rebooting so frequently.I am using oracle 10g database and clusterware also(10.2.0.1).
Ihave checked os logs(linux AS 4),and rac related logs.Not able to find out anything.Posting all logs please suggest.Hi i am posting alert log,os log and ocssd logs....
clusterware alert log....._
[crsd(5649)]CRS-1201:CRSD started on node ctmisdb1.
2012-03-21 09:50:38.188
[cssd(7490)]CRS-1601:CSSD Reconfiguration complete. Active nodes are ctmisdb1 .
2012-03-21 09:50:46.726
[crsd(5649)]CRS-1204:Recovering CRS resources for node ctmisdb2.
2012-03-21 09:55:21.760
[cssd(7490)]CRS-1601:CSSD Reconfiguration complete. Active nodes are ctmisdb1 ctmisdb2 .
2012-03-21 12:07:46.681
[cssd(7426)]CRS-1605:CSSD voting file is online: /dev/raw/raw2. Details in /u01/app/oracle/product/crs/log/ctmisdb1/cssd/ocssd.log.
2012-03-21 12:07:50.432
[cssd(7426)]CRS-1601:CSSD Reconfiguration complete. Active nodes are ctmisdb1 ctmisdb2 .
2012-03-21 12:07:50.893
[crsd(5549)]CRS-1012:The OCR service started on node ctmisdb1.
2012-03-21 12:07:50.942
[evmd(7304)]CRS-1401:EVMD started on node ctmisdb1.
2012-03-21 12:07:52.827
[crsd(5549)]CRS-1201:CRSD started on node ctmisdb1.
2012-03-21 12:48:41.908
[cssd(7448)]CRS-1605:CSSD voting file is online: /dev/raw/raw2. Details in /u01/app/oracle/product/crs/log/ctmisdb1/cssd/ocssd.log.
2012-03-21 12:48:45.741
[cssd(7448)]CRS-1601:CSSD Reconfiguration complete. Active nodes are ctmisdb1 ctmisdb2 .
2012-03-21 12:48:49.173
[crsd(5546)]CRS-1012:The OCR service started on node ctmisdb1.
2012-03-21 12:48:49.190
[evmd(7328)]CRS-1401:EVMD started on node ctmisdb1.
2012-03-21 12:48:50.818
[crsd(5546)]CRS-1201:CRSD started on node ctmisdb1.
2012-03-21 13:26:36.398
[cssd(7343)]CRS-1605:CSSD voting file is online: /dev/raw/raw2. Details in /u01/app/oracle/product/crs/log/ctmisdb1/cssd/ocssd.log.
2012-03-21 13:26:40.492
[cssd(7343)]CRS-1601:CSSD Reconfiguration complete. Active nodes are ctmisdb1 ctmisdb2 .
2012-03-21 13:26:40.939
[crsd(5542)]CRS-1012:The OCR service started on node ctmisdb1.
2012-03-21 13:26:40.977
[evmd(7223)]CRS-1401:EVMD started on node ctmisdb1.
2012-03-21 13:26:42.772
[crsd(5542)]CRS-1201:CRSD started on node ctmisdb1.
node os log....+
Mar 21 12:06:35 ctmisdb1 rc: Starting readahead: succeeded
Mar 21 12:06:35 ctmisdb1 messagebus: messagebus startup succeeded
Mar 21 12:06:36 ctmisdb1 cups-config-daemon: cups-config-daemon startup succeeded
Mar 21 12:06:36 ctmisdb1 haldaemon: haldaemon startup succeeded
Mar 21 12:06:37 ctmisdb1 fstab-sync[6267]: removed all generated mount points
Mar 21 12:06:37 ctmisdb1 fstab-sync[6378]: added mount point /media/cdrecorder for /dev/hde
Mar 21 12:06:37 ctmisdb1 su(pam_unix)[6323]: session opened for user oracle by (uid=0)
Mar 21 12:06:37 ctmisdb1 su(pam_unix)[6324]: session opened for user oracle by (uid=0)
Mar 21 12:06:37 ctmisdb1 su(pam_unix)[6229]: session opened for user oracle by (uid=0)
Mar 21 12:06:37 ctmisdb1 su(pam_unix)[6229]: session closed for user oracle
Mar 21 12:06:37 ctmisdb1 su(pam_unix)[6644]: session opened for user oracle by (uid=0)
Mar 21 12:06:37 ctmisdb1 kernel: matroxfb: cannot set xres to 800, rounded up to 832
Mar 21 12:06:37 ctmisdb1 last message repeated 2 times
Mar 21 12:06:41 ctmisdb1 su(pam_unix)[6323]: session closed for user oracle
Mar 21 12:06:41 ctmisdb1 su(pam_unix)[6644]: session closed for user oracle
Mar 21 12:06:41 ctmisdb1 su(pam_unix)[6324]: session closed for user oracle
Mar 21 12:06:41 ctmisdb1 logger: Cluster Ready Services completed waiting on dependencies.
Mar 21 12:06:41 ctmisdb1 last message repeated 2 times
Mar 21 12:06:45 ctmisdb1 gdm(pam_unix)[6379]: session opened for user root by (uid=0)
Mar 21 12:06:46 ctmisdb1 gconfd (root-7052): starting (version 2.8.1), pid 7052 user 'root'
Mar 21 12:06:47 ctmisdb1 gconfd (root-7052): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Mar 21 12:06:47 ctmisdb1 gconfd (root-7052): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 1
Mar 21 12:06:47 ctmisdb1 gconfd (root-7052): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2
Mar 21 12:06:55 ctmisdb1 gconfd (root-7052): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 0
Mar 21 12:07:41 ctmisdb1 su(pam_unix)[5547]: session opened for user oracle by (uid=0)
Mar 21 12:07:41 ctmisdb1 logger: Running CRSD with TZ =
Mar 21 12:07:43 ctmisdb1 su(pam_unix)[7399]: session opened for user oracle by (uid=0)
Mar 21 12:12:49 ctmisdb1 sshd(pam_unix)[15323]: session opened for user root by root(uid=0)
Mar 21 12:12:57 ctmisdb1 su(pam_unix)[15531]: session opened for user oracle by root(uid=0)
Mar 21 12:47:05 ctmisdb1 syslogd 1.4.1: restart.
ocssd log....
[ CSSD]2012-03-21 11:24:41.045 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x800661f0c0) proc(0x8006622560) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 11:24:41.078 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x800660cfe0) proc(0x800662ba70) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:07:44.564 >USER: Oracle Database 10g CSS Release 10.2.0.1.0 Production Copyright 1996, 2004 Oracle. All rights reserved.
[ clsdmt]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=ctmisdb1DBG_CSSD))
[ CSSD]2012-03-21 12:07:44.564 >USER: CSS daemon log for node ctmisdb1, number 1, in cluster crs
[ CSSD]2012-03-21 12:07:44.581 [28260544] >TRACE: clssscmain: local-only set to false
[ CSSD]2012-03-21 12:07:44.603 [28260544] >TRACE: clssnmReadNodeInfo: added node 1 (ctmisdb1) to cluster
[ CSSD]2012-03-21 12:07:44.621 [28260544] >TRACE: clssnmReadNodeInfo: added node 2 (ctmisdb2) to cluster
[ CSSD]2012-03-21 12:07:44.627 [72925824] >TRACE: clssnm_skgxnmon: skgxn init failed, rc 1
[ CSSD]2012-03-21 12:07:44.627 [28260544] >TRACE: clssnm_skgxnonline: Using vacuous skgxn monitor
[ CSSD]2012-03-21 12:07:44.641 [28260544] >TRACE: clssnmInitNMInfo: misscount set to 60
[ CSSD]2012-03-21 12:07:44.655 [28260544] >TRACE: clssnmDiskStateChange: state from 1 to 2 disk (0//dev/raw/raw2)
[ CSSD]2012-03-21 12:07:46.661 [72925824] >TRACE: clssnmDiskStateChange: state from 2 to 4 disk (0//dev/raw/raw2)
[ CSSD]2012-03-21 12:07:46.690 [72925824] >TRACE: clssnmReadDskHeartbeat: node(2) is down. rcfg(18) wrtcnt(7920) LATS(0) Disk lastSeqNo(7920)
[ CSSD]2012-03-21 12:07:46.752 [28260544] >TRACE: clssnmFatalInit: fatal mode enabled
[ CSSD]2012-03-21 12:07:46.752 [94777984] >TRACE: clssnmconnect: connecting to node 1, flags 0x0001, connector 1
[ CSSD]2012-03-21 12:07:46.753 [94777984] >TRACE: clssnmconnect: connecting to node 0, flags 0x0000, connector 1
[ CSSD]2012-03-21 12:07:46.753 [94777984] >TRACE: clssnmClusterListener: Probing node(2)
[ CSSD]2012-03-21 12:07:46.755 [94777984] >TRACE: clssnmConnComplete: connected to node 2 (con 0x8006601040), state 3 birth 0, unique 1332303918/1332303918 prevConuni(0)
[ CSSD]2012-03-21 12:07:46.756 [106332800] >TRACE: clssgmclientlsnr: listening on (ADDRESS=(PROTOCOL=ipc)(KEY=Oracle_CSS_LclLstnr_crs_1))
[ CSSD]2012-03-21 12:07:46.756 [106332800] >TRACE: clssgmclientlsnr: listening on (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_ctmisdb1_crs))
[ CSSD]2012-03-21 12:07:46.757 [151810688] >TRACE: clssnmPollingThread: Connection complete
[ CSSD]2012-03-21 12:07:46.757 [162296448] >TRACE: clssnmSendingThread: Connection complete
[ CSSD]2012-03-21 12:07:46.757 [172782208] >TRACE: clssnmRcfgMgrThread: Connection complete
[ CSSD]2012-03-21 12:07:46.757 [172782208] >TRACE: clssnmRcfgMgrThread: Local Join
[ CSSD]2012-03-21 12:07:46.757 [172782208] >WARNING: clssnmLocalJoinEvent: takeover aborted due to connected but inactive nodes
[ CSSD]2012-03-21 12:07:47.339 [94777984] >TRACE: clssnmHandleSync: Acknowledging sync: src[2] srcName[ctmisdb2] seq[5] sync[18]
[ CSSD]2012-03-21 12:07:47.759 [172782208] >TRACE: clssnmRcfgMgrThread: lastleader(2) unique(1332311864)
[ CSSD]2012-03-21 12:07:48.341 [94777984] >TRACE: clssnmSendVoteInfo: node(2) syncSeqNo(18)
[ CSSD]2012-03-21 12:07:50.346 [94777984] >TRACE: clssnmUpdateNodeState: node 0, state (0/0) unique (0/0) prevConuni(0) birth (0/0) (old/new)
[ CSSD]2012-03-21 12:07:50.346 [94777984] >TRACE: clssnmDeactivateNode: node 0 () left cluster
[ CSSD]2012-03-21 12:07:50.346 [94777984] >TRACE: clssnmUpdateNodeState: node 1, state (1/2) unique (1332311864/1332311864) prevConuni(0) birth (0/18) (old/new)
[ CSSD]2012-03-21 12:07:50.346 [94777984] >TRACE: clssnmUpdateNodeState: node 2, state (4/3) unique (1332303918/1332303918) prevConuni(0) birth (0/16) (old/new)
[ CSSD]2012-03-21 12:07:50.346 [94777984] >USER: clssnmHandleUpdate: SYNC(18) from node(2) completed
[ CSSD]2012-03-21 12:07:50.346 [94777984] >USER: clssnmHandleUpdate: NODE 1 (ctmisdb1) IS ACTIVE MEMBER OF CLUSTER
[ CSSD]2012-03-21 12:07:50.346 [94777984] >USER: clssnmHandleUpdate: NODE 2 (ctmisdb2) IS ACTIVE MEMBER OF CLUSTER
[ CSSD]2012-03-21 12:07:50.429 [28260544] >USER: NMEVENT_SUSPEND [00][00][00][00]
[ CSSD]2012-03-21 12:07:50.429 [183267968] >TRACE: clssgmReconfigThread: started for reconfig (18)
[ CSSD]2012-03-21 12:07:50.429 [183267968] >USER: NMEVENT_RECONFIG [00][00][00][06]
[ CSSD]2012-03-21 12:07:50.429 [183267968] >TRACE: clssgmEstablishConnections: 2 nodes in cluster incarn 18
[ CSSD]2012-03-21 12:07:50.430 [140255872] >TRACE: clssgmInitialRecv: (0x102a0360) accepted a new connection from node 2 born at 16 active (2, 2), vers (10,3,1,2)
[ CSSD]2012-03-21 12:07:50.430 [140255872] >TRACE: clssgmInitialRecv: conns done (2/2)
[ CSSD]2012-03-21 12:07:50.430 [183267968] >TRACE: clssgmEstablishMasterNode: MASTER for 18 is node(2) birth(16)
[ CSSD]2012-03-21 12:07:50.430 [183267968] >TRACE: clssgmChangeMasterNode: requeued 0 RPCs
[ CSSD]2012-03-21 12:07:50.432 [140255872] >TRACE: clssgmHandleDBDone(): src/dest (2/65535) size(72) incarn 18
[ CSSD]CLSS-3000: reconfiguration successful, incarnation 18 with 2 nodes
[ CSSD]CLSS-3001: local node number 1, master node number 2
[ CSSD]2012-03-21 12:07:50.433 [183267968] >TRACE: clssgmReconfigThread: completed for reconfig(18), with status(1)
[ CSSD]2012-03-21 12:07:50.550 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x8006603bb0) proc(0x8006608b00) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:07:50.551 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x80066066f0) proc(0x8006608d70) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:07:53.569 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x800660ec70) proc(0x8006611260) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:08:00.829 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x8006610990) proc(0x800660de00) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:08:04.698 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x8006613030) proc(0x8006612930) pid(8115) proto(10:2:1:1)
[ CSSD]2012-03-21 12:08:04.816 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x8006612950) proc(0x8006613c20) pid(8115) proto(10:2:1:1)
[ CSSD]2012-03-21 12:08:04.832 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x8006612950) proc(0x8006613c20) pid(8115) proto(10:2:1:1)
[ CSSD]2012-03-21 12:08:06.615 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x8006612950) proc(0x8006613c20) pid(8171) proto(10:2:1:1)
[ CSSD]2012-03-21 12:08:07.114 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x8006615960) proc(0x8006616350) pid(8175) proto(10:2:1:1)
[ CSSD]2012-03-21 12:08:11.373 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x80066192a0) proc(0x8006619470) pid(8302) proto(10:2:1:1)
[ CSSD]2012-03-21 12:08:11.669 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x800661bf60) proc(0x800661ee20) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:08:17.135 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x800661bf60) proc(0x800661ee70) pid(8458) proto(10:2:1:1)
[ CSSD]2012-03-21 12:08:17.268 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x800661fc00) proc(0x80066220d0) pid(8460) proto(10:2:1:1)
[ CSSD]2012-03-21 12:08:17.305 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x80066223e0) proc(0x8006625250) pid(8462) proto(10:2:1:1)
[ CSSD]2012-03-21 12:08:17.353 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x8006625560) proc(0x8006628430) pid(8464) proto(10:2:1:1)
[ CSSD]2012-03-21 12:08:24.585 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x8006625560) proc(0x8006628430) pid(8645) proto(10:2:1:1)
[ CSSD]2012-03-21 12:08:27.957 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x8006628740) proc(0x800662b610) pid(8722) proto(10:2:1:1)
[ CSSD]2012-03-21 12:08:30.931 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x800662cce0) proc(0x800662c860) pid(8801) proto(10:2:1:1)
[ CSSD]2012-03-21 12:08:36.400 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x800661c5f0) proc(0x800661eb50) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:08:37.863 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x800662f1c0) proc(0x800661eee0) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:08:38.537 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x800662f1c0) proc(0x800661d500) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:08:39.232 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x800661bf60) proc(0x800661d500) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:08:43.085 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x8006611630) proc(0x8006611210) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:08:58.971 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x800660b830) proc(0x80066112c0) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:09:59.290 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x8006611630) proc(0x800660b190) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:10:59.589 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x8006611630) proc(0x800660b190) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:11:59.904 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x8006611630) proc(0x800660b190) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:13:00.203 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x8006611630) proc(0x800660b190) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:13:14.029 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x800660b830) proc(0x800660b190) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:14:00.501 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x8006611630) proc(0x8006611210) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:15:00.809 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x8006611630) proc(0x8006628670) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:16:01.117 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x8006611630) proc(0x8006628670) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:17:01.447 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x8006611630) proc(0x800662f0f0) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:18:01.762 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x8006611630) proc(0x8006628670) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:18:39.841 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x8006611630) proc(0x8006628670) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:18:42.123 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x800660b830) proc(0x8006628670) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:18:42.316 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x8006611630) proc(0x8006628670) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:18:42.843 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x8006611630) proc(0x8006628670) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:18:42.963 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x800660b830) proc(0x8006628670) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:18:43.098 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x800660b260) proc(0x800662bd20) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:18:44.173 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x800660b830) proc(0x8006628670) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:18:44.368 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x800660b260) proc(0x800660b310) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:18:45.351 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x800660b830) proc(0x8006628670) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:18:46.236 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x800660b830) proc(0x800662f0f0) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:18:47.031 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x800660b830) proc(0x800662f0f0) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:18:47.694 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x800660b830) proc(0x800662f0f0) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:18:47.819 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x800660b260) proc(0x800660b310) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:18:48.103 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x800660b830) proc(0x800662f0f0) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:18:48.327 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x800660b260) proc(0x800660b310) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:18:48.484 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x800660b830) proc(0x8006611210) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:18:48.758 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x8006611630) proc(0x800662f0f0) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:18:49.529 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x800660b830) proc(0x800662f0f0) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:18:50.509 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x8006611630) proc(0x800662f0f0) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:18:51.060 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x800660b830) proc(0x800662f0f0) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:18:51.558 [106332800] >TRACE: clssgmClientConnectMsg: Connect from con(0x8006611630) proc(0x800662f0f0) pid() proto(10:2:1:1)
[ CSSD]2012-03-21 12:48:39.836 >USER: Oracle Database 10g CSS Release 10.2.0.1.0 Production Copyright 1996, 2004 Oracle. All rights reserved.
[ clsdmt]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=ctmisdb1DBG_CSSD))
[ CSSD]2012-03-21 12:48:39.836 >USER: CSS daemon log for node ctmisdb1, number 1, in cluster crs
[ CSSD]2012-03-21 12:48:39.849 [28260544] >TRACE: clssscmain: local-only set to false
[ CSSD]2012-03-21 12:48:39.865 [28260544] >TRACE: clssnmReadNodeInfo: added node 1 (ctmisdb1) to cluster
[ CSSD]2012-03-21 12:48:39.872 [28260544] >TRACE: clssnmReadNodeInfo: added node 2 (ctmisdb2) to cluster
[ CSSD]2012-03-21 12:48:39.879 [72925824] >TRACE: clssnm_skgxnmon: skgxn init failed, rc 1
[ CSSD]2012-03-21 12:48:39.879 [28260544] >TRACE: clssnm_skgxnonline: Using vacuous skgxn monitor
[ CSSD]2012-03-21 12:48:39.881 [28260544] >TRACE: clssnmInitNMInfo: misscount set to 60
[ CSSD]2012-03-21 12:48:39.888 [28260544] >TRACE: clssnmDiskStateChange: state from 1 to 2 disk (0//dev/raw/raw2)
[ CSSD]2012-03-21 12:48:41.892 [72925824] >TRACE: clssnmDiskStateChange: state from 2 to 4 disk (0//dev/raw/raw2)
[ CSSD]2012-03-21 12:48:41.915 [72925824] >TRACE: clssnmReadDskHeartbeat: node(2) is down. rcfg(20) wrtcnt(10367) LATS(0) Disk lastSeqNo(10367)
[ CSSD]2012-03-21 12:48:41.959 [28260544] >TRACE: clssnmFatalInit: fatal mode enabled
[ CSSD]2012-03-21 12:48:41.959 [94777984] >TRACE: clssnmconnect: connecting to node 1, flags 0x0001, connector 1
[ CSSD]2012-03-21 12:48:41.959 [94777984] >TRACE: clssnmconnect: connecting to node 0, flags 0x0000, connector 1
[ CSSD]2012-03-21 12:48:41.959 [94777984] >TRACE: clssnmClusterListener: Probing node(2)
[ CSSD]2012-03-21 12:48:41.961 [94777984] >TRACE: clssnmConnComplete: connected to node 2 (con 0x8006702790), state 3 birth 0, unique 1332303918/1332303918 prevConuni(0)
[ CSSD]2012-03-21 12:48:41.962 [106332800] >TRACE: clssgmclientlsnr: listening on (ADDRESS=(PROTOCOL=ipc)(KEY=Oracle_CSS_LclLstnr_crs_1))
[ CSSD]2012-03-21 12:48:41.962 [106332800] >TRACE: clssgmclientlsnr: listening on (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_ctmisdb1_crs))
[ CSSD]2012-03-21 12:48:41.963 [152330880] >TRACE: clssnmPollingThread: Connection complete
[ CSSD]2012-03-21 12:48:41.963 [162816640] >TRACE: clssnmSendingThread: Connection complete
[ CSSD]2012-03-21 12:48:41.963 [173302400] >TRACE: clssnmRcfgMgrThread: Connection complete
[ CSSD]2012-03-21 12:48:41.963 [173302400] >TRACE: clssnmRcfgMgrThread: Local Join
[ CSSD]2012-03-21 12:48:41.963 [173302400] >WARNING: clssnmLocalJoinEvent: takeover aborted due to connected but inactive nodes
[ CSSD]2012-03-21 12:48:42.631 [94777984] >TRACE: clssnmHandleSync: Acknowledging sync: src[2] srcName[ctmisdb2] seq[13] sync[20]
[ CSSD]2012-03-21 12:48:42.965 [173302400] >TRACE: clssnmRcfgMgrThread: lastleader(2) unique(1332314319)
[ CSSD]2012-03-21 12:48:43.636 [94777984] >TRACE: clssnmSendVoteInfo: node(2) syncSeqNo(20)
[ CSSD]2012-03-21 12:48:45.640 [94777984] >TRACE: clssnmUpdateNodeState: node 0, state (0/0) unique (0/0) prevConuni(0) birth (0/0) (old/new)
[ CSSD]2012-03-21 12:48:45.640 [94777984] >TRACE: clssnmDeactivateNode: node 0 () left cluster
[ CSSD]2012-03-21 12:48:45.640 [94777984] >TRACE: clssnmUpdateNodeState: node 1, state (1/2) unique (1332314319/1332314319) prevConuni(0) birth (0/20) (old/new)
[ CSSD]2012-03-21 12:48:45.640 [94777984] >TRACE: clssnmUpdateNodeState: node 2, state (4/3) unique (1332303918/1332303918) prevConuni(0) birth (0/16) (old/new)
[ CSSD]2012-03-21 12:48:45.640 [94777984] >USER: clssnmHandleUpdate: SYNC(20) from node(2) completed
[ CSSD]2012-03-21 12:48:45.640 [94777984] >USER: clssnmHandleUpdate: NODE 1 (ctmisdb1) IS ACTIVE MEMBER OF CLUSTER
[ CSSD]2012-03-21 12:48:45.640 [94777984] >USER: clssnmHandleUpdate: NODE 2 (ctmisdb2) IS ACTIVE MEMBER OF CLUSTER
[ CSSD]2012-03-21 12:48:45.737 [28260544] >USER: NMEVENT_SUSPEND [00][00][00][00]
[ CSSD]2012-03-21 12:48:45.738 [183788160] >TRACE: clssgmReconfigThread: started for reconfig (20)
[ CSSD]2012-03-21 12:48:45.738 [183788160] >USER: NMEVENT_RECONFIG [00][00][00][06]
[ CSSD]2012-03-21 12:48:45.738 [183788160] >TRACE: clssgmEstablishConnections: 2 nodes in cluster incarn 20
[ CSSD]2012-03-21 12:48:45.739 [140776064] >TRACE: clssgmInitialRecv: (0x102a0370) accepted a new connection from node 2 born at 16 active (2, 2), vers (10,3,1,2)
[ CSSD]2012-03-21 12:48:45.739 [140776064] >TRACE: clssgmInitialRecv: conns done (2/2)
[ CSSD]2012-03-21 12:48:45.739 [183788160] >TRACE: clssgmEstablishMasterNode: MASTER for 20 is node(2) birth(16)
[ CSSD]2012-03-21 12:48:45.739 [183788160] >TRACE: clssgmChangeMasterNode: requeued 0 RPCs
[ CSSD]2012-03-21 12:48:45.741 [140776064] >TRACE: clssgmHandleDBDone(): src/dest (2/65535) size(72) incarn 20
[ CSSD]CLSS-3000: reconfiguration successful, incarnation 20 with 2 nodes
Plz check and help.......... -
I have a pre-production 2-node cluster running on Solaris 10, Oracle 10.2.0.3 with the Oracle CRS, and using a NetApp filer as the shared storage.
I also have a separate Solaris server running Grid Control 10.2.0.3, with the repository as one of the databases on the RAC (don't know if this is relevant to my problem).
Periodically both RAC nodes reboot, with no trace of why (the GC server is fine). There is nothing logged in the Solaris logs (messages file), CRS logs, Oracle logs or the NetApp logs.
All that is shown is the relevant service starting up following the shutdown.
Has anyone any experience of this, or any thoughts on which component may cause such an issue?
Thanks in advance
BobWhat type of Sun hardware are you using?
Below is the Action Plan Oracle support sent me on my SR on this issue, not sure if any of this was provided to you or would be of help.
ACTION PLAN
============
1. there is nothing on the files at all that sheds any light on the issue
agian 3 sperate sets of clusters all losing all nodes at the same tiem is a very strange occurance. Please be sure to have the admin look for
anything in common wiht all custers.
2. advice placing oswatcher on the systems Note.301137.1 Ext/Pub OS Watcher User Guide
if we should have another occurances we will want the oswatcher logs for 1 hr before issue thru issue
also see if the unix admin perhaps has any os stats from this occurance
3. advice settign ntpd to run with -x option I do see that you are having negative time changes
at times
-x will give us a skew rather then an abbrupt time change
4. advice setting this when you can
Please do the following
set the diagwait parameter:
crsctl set css diagwait N [-force]
Where N is the number of seconds to wait for a filesystem sync to
complete (after this wait the node will reboot regardless of whether the
sync has completed). This change must be made with the clusterware
down, which will require the '-force', or with the stack up on just 1
node, after which the stack on that node must be restarted before the
stack starts up on any of the other nodes.
N should be set to 25 (25 seconds)
5. advice that you have with pcw mlr#6 Patch 5980915 on the systems as well
but I do not believe that this was an oracle bug the reason for placing the patch on is for advanced diagnostics that is in that patchset
6. the two issues sun is workking on
Sun is working to resolve a time skew issue and a Solaris 10 kernel SIGALRM Sun#6292092 in addition to Sun#6595936.
7. we do have a diagnostic oprocd that soem sites have used but on thier test systems. It stops reboots adn dumps information but I have
been hesitant to place it on production boxes if you continue to have issues we may consider download the oprocd_skewfix_noreboot fro
m Bug 6279879 but at this time I do not belvve that is warrented -
JDBC read stuck if RAC node goes down
We did several tests with Java applications against our RAC DB and face a hanging application if we power off the RAC node that executes the current (long) running query.
We can see that the application receives HA-events via UCP:
2015-01-22 13:02:11 | r-thread-1 | WARN | o.ucp.jdbc.oracle.ONSDatabaseFailoverEvent | NO timezone in HA event
However, the application started a query before and the query is not aborted with an exception. A Thread dump after about 7 minutes shows that the application is hanging in a socket read call:
"pool-1-thread-1" #32 prio=5 os_prio=0 tid=0x00007fedf45b2000 nid=0xbc4 runnable [0x00007fee00cd3000]
java.lang.Thread.State: RUNNABLE
at java.net.SocketInputStream.socketRead0(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:150)
at java.net.SocketInputStream.read(SocketInputStream.java:121)
at oracle.net.ns.Packet.receive(Packet.java:283)
at oracle.net.ns.DataPacket.receive(DataPacket.java:103)
at oracle.net.ns.NetInputStream.getNextPacket(NetInputStream.java:230)
at oracle.net.ns.NetInputStream.read(NetInputStream.java:175)
at oracle.net.ns.NetInputStream.read(NetInputStream.java:100)
at oracle.net.ns.NetInputStream.read(NetInputStream.java:85)
at oracle.jdbc.driver.T4CSocketInputStreamWrapper.readNextPacket(T4CSocketInputStreamWrapper.java:123)
at oracle.jdbc.driver.T4CSocketInputStreamWrapper.read(T4CSocketInputStreamWrapper.java:79)
at oracle.jdbc.driver.T4CMAREngine.unmarshalUB1(T4CMAREngine.java:1122)
at oracle.jdbc.driver.T4CMAREngine.unmarshalSB1(T4CMAREngine.java:1099)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:288)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:191)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:523)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:207)
at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:863)
at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1153)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1275)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3576)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3620)
- locked <0x00000000c0ddcb20> (a oracle.jdbc.driver.T4CConnection)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeQuery(OraclePreparedStatementWrapper.java:1491)
at org.springframework.jdbc.core.JdbcTemplate$1.doInPreparedStatement(JdbcTemplate.java:703)
The expected behaviour would be that a running query is aborted with an exception. (BTW: This happens if the service is taken down with "shutdown immediate". All ok for this case.)
We consider to implement custom ONS listeners [1], but we actually expect that UCP would handle such situations or lets us register strategies/callbacks for certain events.
Our config:
Oracle Enterprise 11.2.0.4.0 with RAC
ons.jar 12.1.0.1
ojdbc6.jar 11.2.0.2
ucp.jar 12.1.0.1
Server JRE 1.8.0_25
Any hints appreciated.
[1] http://docs.oracle.com/cd/E11882_01/java.112/e16548/apxracfan.htm#JJDBC28945You're concept isn't right:
http://docs.oracle.com/cd/E11882_01/server.112/e25494/restart.htm#ADMIN13178
Overview of Fast Application Notification
FAN is a notification mechanism that Oracle Restart can use to notify other processes about configuration changes that include service status changes, such as UP or DOWN events. FAN provides the ability to immediately terminate inflight transaction when an instance or server fails. Integrated Oracle clients receive the events and respond. Applications can respond either by propagating the error to the user or by resubmitting the transactions and masking the error from the application user. When a DOWN event occurs, integrated clients immediately clean up connections to the terminated database. When an UP event occurs, the clients create new connections to the new primary database instance.
Also, take a look at these docs: http://docs.oracle.com/cd/E11882_01/java.112/e12265/rac.htm#JJUCP08100 ; and https://support.oracle.com/epmos/faces/DocumentDisplay?_afrLoop=890204623685515&id=566573.1&_afrWindowMode=0&_adf.ctrl-s…
And make a test, execute a query that took about 1 minute and after you executed, just power down the node where it is executing, to see if it will retrieve the results.
Regards. -
If use MSSQ , when oracle rac node reboot, client get TPEOS error
Hi, all
in my tuxedo applicaton, if we use Single Server, Single Queue mode , when reboot any Oracle RAC node, our application is ok, client can get correct result. but if we use MSSQ（Multi Server, Single Queue) , if Oracle RAC node is ok , our application also is ok. but if we reboot any Oracle RAC node, client program can continue run, get correct result, but always get TPEOS error , for this situation， server can get client request, but client can not get server reply, only get TPEOS error.
our enviroment is :
oracle RAC ,10g 10.2.0.4 , two instances ,rac1 rac2, and two DTP services s1 and s2, set s1 and s2 services TAF is basic
tuxedo 10R3 , two nodes ,work in MP model ，use XA access oracle rac database，services have Transaction and not Transaction
OS is linux AS4 U5, 64bits
service program use OCI
can any one encounter this problem ?Hi, first thanks you
in ULOG file , only have failover information, not any other error message, in client side also has no other error.
not use MSSQ, ubb file about MSSQ config
SERVERS
DEFAULT:
CLOPT="-A "
sinUpdate_server SRVGRP=GROUP11 SRVID=80 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinUpdate_server SRVGRP=GROUP12 SRVID=160 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinCount_server SRVGRP=GROUP11 SRVID=240 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinCount_server SRVGRP=GROUP12 SRVID=320 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinSelect_server SRVGRP=GROUP11 SRVID=360 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinSelect_server SRVGRP=GROUP12 SRVID=400 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinInsert_server SRVGRP=GROUP11 SRVID=520 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinInsert_server SRVGRP=GROUP12 SRVID=560 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinDelete_server SRVGRP=GROUP11 SRVID=600 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinDelete_server SRVGRP=GROUP12 SRVID=640 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinDdl_server SRVGRP=GROUP11 SRVID=700 MIN=5 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinDdl_server SRVGRP=GROUP12 SRVID=740 MIN=5 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
lockselect_server SRVGRP=GROUP11 SRVID=800 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
lockselect_server SRVGRP=GROUP12 SRVID=840 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
#mulup_server SRVGRP=GROUP11 SRVID=1 MIN=2 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
#mulup_server SRVGRP=GROUP12 SRVID=60 MIN=2 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinUpdate_server SRVGRP=GROUP13 SRVID=83 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinUpdate_server SRVGRP=GROUP14 SRVID=164 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinCount_server SRVGRP=GROUP13 SRVID=243 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinCount_server SRVGRP=GROUP14 SRVID=324 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinSelect_server SRVGRP=GROUP13 SRVID=363 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinSelect_server SRVGRP=GROUP14 SRVID=404 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinInsert_server SRVGRP=GROUP13 SRVID=523 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinInsert_server SRVGRP=GROUP14 SRVID=564 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinDelete_server SRVGRP=GROUP13 SRVID=603 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinDelete_server SRVGRP=GROUP14 SRVID=644 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinDdl_server SRVGRP=GROUP13 SRVID=703 MIN=5 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
sinDdl_server SRVGRP=GROUP14 SRVID=744 MIN=5 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
lockselect_server SRVGRP=GROUP13 SRVID=803 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
lockselect_server SRVGRP=GROUP14 SRVID=844 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
#mulup_server SRVGRP=GROUP13 SRVID=13 MIN=2 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
#mulup_server SRVGRP=GROUP14 SRVID=64 MIN=2 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y
WSL SRVGRP=GROUP11 SRVID=1000
CLOPT="-A -- -n//120.3.8.237:7200 -I 60 -T 60 -w WSH -m 50 -M 100 -x 6 -N 3600"
WSL SRVGRP=GROUP12 SRVID=1001
CLOPT="-A -- -n//120.3.8.238:7200 -I 60 -T 60 -w WSH -m 50 -M 100 -x 6 -N 3600"
WSL SRVGRP=GROUP13 SRVID=1003
CLOPT="-A -- -n//120.3.8.237:7203 -I 60 -T 60 -w WSH -m 50 -M 100 -x 6 -N 3600"
WSL SRVGRP=GROUP14 SRVID=1004
CLOPT="-A -- -n//120.3.8.238:7204 -I 60 -T 60 -w WSH -m 50 -M 100 -x 6 -N 3600"
if we use MSSQ ,ubb file about MSSQ config is
*SERVERS
DEFAULT:
CLOPT="-A -p 1,60:1,30"
sinUpdate_server SRVGRP=GROUP11 SRVID=80 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinUpdate11 REPLYQ=Y
sinUpdate_server SRVGRP=GROUP12 SRVID=160 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinUpdate12 REPLYQ=Y
sinCount_server SRVGRP=GROUP11 SRVID=240 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinCount11 REPLYQ=Y
sinCount_server SRVGRP=GROUP12 SRVID=320 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinCount12 REPLYQ=Y
sinSelect_server SRVGRP=GROUP11 SRVID=360 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinSelec11 REPLYQ=Y
sinSelect_server SRVGRP=GROUP12 SRVID=400 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinSelect12 REPLYQ=Y
sinInsert_server SRVGRP=GROUP11 SRVID=520 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinInsert11 REPLYQ=Y
sinInsert_server SRVGRP=GROUP12 SRVID=560 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinInsert12 REPLYQ=Y
sinDelete_server SRVGRP=GROUP11 SRVID=600 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinDelete11 REPLYQ=Y
sinDelete_server SRVGRP=GROUP12 SRVID=640 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinDelete12 REPLYQ=Y
sinDdl_server SRVGRP=GROUP11 SRVID=700 MIN=5 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinDdl11 REPLYQ=Y
sinDdl_server SRVGRP=GROUP12 SRVID=740 MIN=5 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinDdl12 REPLYQ=Y
lockselect_server SRVGRP=GROUP11 SRVID=800 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=lockselect11 REPLYQ=Y
lockselect_server SRVGRP=GROUP12 SRVID=840 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=lockselect12 REPLYQ=Y
#mulup_server SRVGRP=GROUP11 SRVID=1 MIN=2 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=mulup11 REPLYQ=Y
#mulup_server SRVGRP=GROUP12 SRVID=60 MIN=2 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=mulup12 REPLYQ=Y
sinUpdate_server SRVGRP=GROUP13 SRVID=83 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinUpdate13 REPLYQ=Y
sinUpdate_server SRVGRP=GROUP14 SRVID=164 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinUpdate14 REPLYQ=Y
sinCount_server SRVGRP=GROUP13 SRVID=243 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinCount13 REPLYQ=Y
sinCount_server SRVGRP=GROUP14 SRVID=324 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinCount14 REPLYQ=Y
sinSelect_server SRVGRP=GROUP13 SRVID=363 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinSelec13 REPLYQ=Y
sinSelect_server SRVGRP=GROUP14 SRVID=404 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinSelect14 REPLYQ=Y
sinInsert_server SRVGRP=GROUP13 SRVID=523 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinInsert13 REPLYQ=Y
sinInsert_server SRVGRP=GROUP14 SRVID=564 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinInsert14 REPLYQ=Y
sinDelete_server SRVGRP=GROUP13 SRVID=603 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinDelete13 REPLYQ=Y
sinDelete_server SRVGRP=GROUP14 SRVID=644 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinDelete14 REPLYQ=Y
sinDdl_server SRVGRP=GROUP13 SRVID=703 MIN=5 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinDdl13 REPLYQ=Y
sinDdl_server SRVGRP=GROUP14 SRVID=744 MIN=5 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=sinDdl14 REPLYQ=Y
lockselect_server SRVGRP=GROUP13 SRVID=803 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=lockselect13 REPLYQ=Y
lockselect_server SRVGRP=GROUP14 SRVID=844 MIN=10 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=lockselect14 REPLYQ=Y
#mulup_server SRVGRP=GROUP13 SRVID=13 MIN=2 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=mulup13 REPLYQ=Y
#mulup_server SRVGRP=GROUP14 SRVID=64 MIN=2 MAX=30 MAXGEN=10 GRACE=10 RESTART=Y RQADDR=mulup14 REPLYQ=Y
WSL SRVGRP=GROUP11 SRVID=1000
CLOPT="-A -- -n//120.3.8.237:7200 -I 60 -T 60 -w WSH -m 50 -M 100 -x 6 -N 3600"
WSL SRVGRP=GROUP12 SRVID=1001
CLOPT="-A -- -n//120.3.8.238:7200 -I 60 -T 60 -w WSH -m 50 -M 100 -x 6 -N 3600"
WSL SRVGRP=GROUP13 SRVID=1003
CLOPT="-A -- -n//120.3.8.237:7203 -I 60 -T 60 -w WSH -m 50 -M 100 -x 6 -N 3600"
WSL SRVGRP=GROUP14 SRVID=1004
CLOPT="-A -- -n//120.3.8.238:7204 -I 60 -T 60 -w WSH -m 50 -M 100 -x 6 -N 3600"
about above ubb file ,has any error ? or not correct use MSSQ
look forward to you answer,thanks. -
Dbconsole failed to start on one RAC node
Hi
I have 2 RAC nodes (RHEL 4) and 10.2.0.1. On one dbconsole is running and on other I get the following. Earlier dbconsole
on both the nodes used to run perfectly fine. I will appreacite any suggestions to rectify this problem.
Regards
oracle@rac01<18>:/u01/app/oracle/product/10.2/db_1/rac01_RACDB1/sysman/log> emctl start dbconsole
TZ set to Canada/Newfoundland
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://rac01:1158/em/console/aboutApplication
Agent Version : 10.1.0.4.1
OMS Version : Unknown
Protocol Version : 10.1.0.2.0
Agent Home : /u01/app/oracle/product/10.2/db_1/rac01_RACDB1
Agent binaries : /u01/app/oracle/product/10.2/db_1
Agent Process ID : 23329
Parent Process ID : 21132
Agent URL : http://rac01:3938/emd/main
Started at : 2007-07-25 11:37:32
Started by user : oracle
Last Reload : 2007-07-25 11:37:32
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 371
Size of XML files pending upload(MB) : 7.66
Available disk space on upload filesystem : 44.78%
Agent is already started. Will restart the agent
Stopping agent ... stopped.
Starting Oracle Enterprise Manager 10g Database Control ............................................................................................. failed.
Logs are generated in directory /u01/app/oracle/product/10.2/db_1/rac01_RACDB1/sysman/log
oracle@rac01<19>:/u01/app/oracle/product/10.2/db_1/rac01_RACDB1/sysman/log>
ON OTHER NODE:
oracle@rac02<2>:/u01/app/oracle> emctl start dbconsole
TZ set to Canada/Newfoundland
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://rac01:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control .................................... started.
Logs are generated in directory /u01/app/oracle/product/10.2/db_1/rac02_RACDB2/sysman/log
oracle@rac02<3>:/u01/app/oracle>Thanks for your time and reply .
Well, here is what I got, couldn't make out from here.
Regards
oracle@rac01<19>:/u01/app/oracle/product/10.2/db_1/rac01_RACDB1/sysman/log> ls -lart
total 13500
drwxr----- 7 oracle dba 4096 Jul 14 10:48 ..
-rw-r----- 1 oracle dba 0 Jul 14 10:48 emdctl.log
drwxrwx--- 2 oracle dba 4096 Jul 14 10:54 nmcRACDB11521
-rw-r----- 1 oracle dba 4655792 Jul 24 23:01 emoms.trc
-rw-r----- 1 oracle dba 4655792 Jul 24 23:01 emoms.log
drwxr----- 3 oracle dba 4096 Jul 25 11:35 .
-rw-r----- 1 oracle dba 4096 Jul 25 12:05 emdb.nohup.lr
-rw-r----- 1 oracle dba 1074 Jul 25 12:05 emagent_perl.trc
-rw-r----- 1 oracle dba 1731 Jul 25 12:06 emagent.log
-rw-r----- 1 oracle dba 1080 Jul 25 12:07 emagentfetchlet.trc
-rw-r----- 1 oracle dba 1080 Jul 25 12:07 emagentfetchlet.log
-rw-r----- 1 oracle dba 81089 Jul 25 13:28 emdctl.trc
-rw-r----- 1 oracle dba 3309143 Jul 25 13:28 emdb.nohup
-rw-r----- 1 oracle dba 1044518 Jul 25 13:28 emagent.trc
oracle@rac01<20>:/u01/app/oracle/product/10.2/db_1/rac01_RACDB1/sysman/log> cat emagent.log
2007-07-14 10:50:44 Thread-3086936288 Starting Agent 10.1.0.4.1 from /u01/app/oracle/product/10.2/db_1 (00701)
2007-07-14 10:51:16 Thread-3086936288 EMAgent started successfully (00702)
2007-07-14 14:38:21 Thread-3086935744 Starting Agent 10.1.0.4.1 from /u01/app/oracle/product/10.2/db_1 (00701)
2007-07-14 14:39:00 Thread-3086935744 EMAgent started successfully (00702)
2007-07-24 07:05:06 Thread-3086935744 Starting Agent 10.1.0.4.1 from /u01/app/oracle/product/10.2/db_1 (00701)
2007-07-24 07:07:11 Thread-3086935744 target {+ASM1_rac01, osm_instance} is broken: cannot compute dynamic properties in time. (00155)
2007-07-24 07:07:14 Thread-3086935744 EMAgent started successfully (00702)
2007-07-24 12:06:27 Thread-3086935744 EMAgent normal shutdown (00703)
2007-07-24 12:08:26 Thread-3086935744 Starting Agent 10.1.0.4.1 from /u01/app/oracle/product/10.2/db_1 (00701)
2007-07-24 12:08:51 Thread-3086935744 EMAgent started successfully (00702)
2007-07-25 11:35:35 Thread-3086935744 EMAgent normal shutdown (00703)
2007-07-25 11:37:32 Thread-3086935744 Starting Agent 10.1.0.4.1 from /u01/app/oracle/product/10.2/db_1 (00701)
2007-07-25 11:39:29 Thread-3086935744 target {+ASM1_rac01, osm_instance} is broken: cannot compute dynamic properties in time. (00155)
2007-07-25 11:39:30 Thread-3086935744 EMAgent started successfully (00702)
2007-07-25 12:03:36 Thread-3086935744 EMAgent normal shutdown (00703)
2007-07-25 12:05:15 Thread-3086935744 Starting Agent 10.1.0.4.1 from /u01/app/oracle/product/10.2/db_1 (00701)
2007-07-25 12:06:23 Thread-3086935744 target {+ASM1_rac01, osm_instance} is broken: cannot compute dynamic properties in time. (00155)
2007-07-25 12:06:24 Thread-3086935744 EMAgent started successfully (00702)
oracle@rac01<21>:/u01/app/oracle/product/10.2/db_1/rac01_RACDB1/sysman/log> cat emagentfetchlet.log
2007-07-14 11:01:44,208 [main] WARN track.OracleInventory collectInventory.439 - ECM: The inventory location file for the special Windows NT case does not exist or is unreadable.
2007-07-14 14:40:29,096 [main] WARN track.OracleInventory collectInventory.439 - ECM: The inventory location file for the special Windows NT case does not exist or is unreadable.
2007-07-24 07:10:44,123 [main] WARN track.OracleInventory collectInventory.439 - ECM: The inventory location file for the special Windows NT case does not exist or is unreadable.
2007-07-24 12:12:48,187 [main] WARN track.OracleInventory collectInventory.439 - ECM: The inventory location file for the special Windows NT case does not exist or is unreadable.
2007-07-25 11:41:25,628 [main] WARN track.OracleInventory collectInventory.439 - ECM: The inventory location file for the special Windows NT case does not exist or is unreadable.
2007-07-25 12:07:30,335 [main] WARN track.OracleInventory collectInventory.439 - ECM: The inventory location file for the special Windows NT case does not exist or is unreadable.
oracle@rac01<22>:/u01/app/oracle/product/10.2/db_1/rac01_RACDB1/sysman/log>
oracle@rac01<22>:/u01/app/oracle/product/10.2/db_1/rac01_RACDB1/sysman/log> tail -40 emagentfetchlet.trc
2007-07-14 11:01:44,208 [main] WARN track.OracleInventory collectInventory.439 - ECM: The inventory location file for the special Windows NT case does not exist or is unreadable.
2007-07-14 14:40:29,096 [main] WARN track.OracleInventory collectInventory.439 - ECM: The inventory location file for the special Windows NT case does not exist or is unreadable.
2007-07-24 07:10:44,123 [main] WARN track.OracleInventory collectInventory.439 - ECM: The inventory location file for the special Windows NT case does not exist or is unreadable.
2007-07-24 12:12:48,187 [main] WARN track.OracleInventory collectInventory.439 - ECM: The inventory location file for the special Windows NT case does not exist or is unreadable.
2007-07-25 11:41:25,628 [main] WARN track.OracleInventory collectInventory.439 - ECM: The inventory location file for the special Windows NT case does not exist or is unreadable.
2007-07-25 12:07:30,335 [main] WARN track.OracleInventory collectInventory.439 - ECM: The inventory location file for the special Windows NT case does not exist or is unreadable.
oracle@rac01<25>:/u01/app/oracle/product/10.2/db_1/rac01_RACDB1/sysman/log> tail -10 emdctl.trc
2007-07-25 13:01:02 Thread-3086935744 WARN http: snmehl_connect: connect failed to (rac01:1158): Connection refused (error = 111)
2007-07-25 13:04:41 Thread-3086935744 WARN http: snmehl_connect: connect failed to (rac01:1158): Connection refused (error = 111)
2007-07-25 13:07:12 Thread-3086935744 WARN http: snmehl_connect: connect failed to (rac01:1158): Connection refused (error = 111)
2007-07-25 13:10:50 Thread-3086935744 WARN http: snmehl_connect: connect failed to (rac01:1158): Connection refused (error = 111)
2007-07-25 13:14:32 Thread-3086935744 WARN http: snmehl_connect: connect failed to (rac01:1158): Connection refused (error = 111)
2007-07-25 13:18:09 Thread-3086935744 WARN http: snmehl_connect: connect failed to (rac01:1158): Connection refused (error = 111)
2007-07-25 13:20:40 Thread-3086935744 WARN http: snmehl_connect: connect failed to (rac01:1158): Connection refused (error = 111)
2007-07-25 13:24:27 Thread-3086935744 WARN http: snmehl_connect: connect failed to (rac01:1158): Connection refused (error = 111)
2007-07-25 13:28:06 Thread-3086935744 WARN http: snmehl_connect: connect failed to (rac01:1158): Connection refused (error = 111)
2007-07-25 13:31:43 Thread-3086935744 WARN http: snmehl_connect: connect failed to (rac01:1158): Connection refused (error = 111)
oracle@rac01<28>:/u01/app/oracle/product/10.2/db_1/rac01_RACDB1/sysman/log> tail -10 emagent.trc
2007-07-25 13:31:44 Thread-43162528 WARN http: snmehl_connect: connect failed to (rac01:1158): Connection refused (error = 111)
2007-07-25 13:31:44 Thread-43162528 ERROR pingManager: nmepm_pingReposURL: Cannot connect to http://rac01:1158/em/upload/: retStatus=-32
2007-07-25 13:32:14 Thread-74791840 WARN http: snmehl_connect: connect failed to (rac01:1158): Connection refused (error = 111)
2007-07-25 13:32:14 Thread-74791840 ERROR pingManager: nmepm_pingReposURL: Cannot connect to http://rac01:1158/em/upload/: retStatus=-32
2007-07-25 13:32:14 Thread-74791840 WARN http: snmehl_connect: connect failed to (rac01:1158): Connection refused (error = 111)
2007-07-25 13:32:14 Thread-74791840 ERROR pingManager: nmepm_pingReposURL: Cannot connect to http://rac01:1158/em/upload/: retStatus=-32
2007-07-25 13:32:44 Thread-74791840 WARN http: snmehl_connect: connect failed to (rac01:1158): Connection refused (error = 111)
2007-07-25 13:32:44 Thread-74791840 ERROR pingManager: nmepm_pingReposURL: Cannot connect to http://rac01:1158/em/upload/: retStatus=-32
2007-07-25 13:32:44 Thread-74791840 WARN http: snmehl_connect: connect failed to (rac01:1158): Connection refused (error = 111)
2007-07-25 13:32:44 Thread-74791840 ERROR pingManager: nmepm_pingReposURL: Cannot connect to http://rac01:1158/em/upload/: retStatus=-32
Message was edited by:
Singh -
Have lost a RAC node (10gr2) some years ago. We recovered the node via a bit of a hack - pulling a mirrored root disk from another cluster node and changing the config of that root disk, after boot, to that of the lost node (including recreating local node log directories and so on). But that was done as a result of a crisis... ;-)
Have lost a 11gr2 RAC node (3 node RAC, 1st node) this weekend during scheduled maintenance (was told that the root disks crashed badly when server was restarted). O/s has been reinstalled in the meantime. I've been looking for an official support note or section in an Oracle manual that describes the most painless way to get a lost node working again. Have not found anything.
Is the recommended approach to remove the lost node from the cluster and then add it as a brand new node? Or did I miss an alternative or even recommended Oracle method, in my googling and looking through the docs and Metalink notes?Is the recommended approach to remove the lost node from the cluster and then add it as a brand new node?i think so and This doc may help in this case as new node has no information of existing node setup.
Steps to Remove Node from Cluster When the Node Crashes Due to OS/Hardware Failure and cannot boot up [ID 466975.1] -
What is best use of 1400 gb SGA (2 rac nodes 768gb each)
currently using 11.2.0.3.0 on unix sun sever with 2 RAC nodes each 8 UltraSPARC-T1 cpus (came out in 2005) four threads each so oracle sees 32 CPUS very slow(1.2 gb). Database is 4TB in size on regular SAN (10k speed).
8gb SGA.
New boss wants to update system to the max to get best performance possible Money is a concern of course but budget is pretty high, Our use case is 12-16 users at same time, running reports some small others very large (return single row or 10000s or rows). reports take 5 sec to 5 minutes, Our job is get the fastest system possible, We have total of 8 licenses available so we can have 16 cores. We are also getting a 6tb all flash SSD array for database. we can get any CPU we want but we cant use parallel query server due to all kinds of issues we have experienced (too many slaves, RAC interconnect saturation etc, whack-a-mole). sparc has too many threads and without PS oracle runs query in single thread.
we have speced out the following system for each RAC node
HP ProLiant DL380p Gen8 8 SFF server
2 Intel Xeon E5-2637v2 3.5GHz/4-core cpus
768 gb ram
2 HP 300GB 6G SAS 15K drives for database software
this will give us total of 4 Xeon E5-2637v2 cpus 16 cores total (,5 factor for 8 licenses) and 1536 ram (leaving ~1400 for sga). this will guarantee an available core for each user. we intend to create very very large keep pool around 300 gb for each node that will hold all our dimension tables. this we hope will reduce reads from the SSD to just data from fact tables.,
Are we doing a massive overkill here? the budget for this was way less than what our boss expected. will that big an sga be wasted will say a 256gb be fine. or will oracle take advantage of it and be able to keep most blocks in there.
will an sga that big cause oracle problems due to overhead of handling that much ram?Current System:
===========
a. Version : 11.2.0.3
b. Unix Sun
c. CPU - 8 cpus with 4 threads => 32 logical cpus or cores
d. database 4TB
e. SAN - 10k speed disk drives
f. 8gb SGA
g. 1.2 gb ??
h. Users --> 12-16 concurrent and run reports varying size
i. reports elasped time 5 sec to 5 mins
j. cpu license -->8
Target System
===========
a. Version: 11.2.0.3
b. HP ProLiant DL380p Gen8 8 SFF server
c. RAM --> 768 GB
d. 2 HP 300GB 6G SAS 15K drives for database software
e. large keep pool -->90 gb to hold all dimension tables.
f. SSD to just data from fact tables
g. SGA -->256gb
Reassessment of the performance issues of current system appears to be required.Good performance tuning expert is required to look into tuning issues of current application by analyzing awr performance metrics . If 8GB SGA is not enough,then reason behind so is that queries running in the system are not having good access path to select lesser data to avoid flushing out of recent buffers from different tables involved in the query. Until those issues are identified , wherever you go, performance issue wont be going away as table size increase in future , problem will reappear.Even if the queries are running with more FULL Scan , then re-platforming to Exadata might be right decision as Exadata has smart scan , cell offloading feature which works faster and might be right direction for best performance and best investment for future.Compression (compress for OLTP) could be one of the other feature to exploit to improve further efficiency while reading the lesser block in lesser read time.
Investment in infrastructure will solve a few issue in short term but long term issue will again arise.
Investment in identifying the performance issues of current system would be best investment in current scenario. -
Private Interconnect: Should any nodes other than RAC nodes have one?
The contractors that set up our four-node production 10g RAC (and a standalone development server) also assigned private interconnect addresses to 2 Apache/ApEx servers and a standalone development database server.
There are service names in the tnsnames.ora on all servers in our infrastructure referencing these private interconnects- even the non-rac member servers. The nics on these servers are not bound for failover with the nics bound to the public/VIP addresses. These nics are isolated on their own switch.
Could this configuration be related to lost heartbeats or voting disk errors? We experience rac node expulsions and even arbitrary bounces (reboots!) of all the rac nodes.I do not have access to the contractors. . . .can only look at what they have left behind and try to figure out their intention. . .
I am reading the Ault/Tumha book Oracle 10g Grid and Real Application Clusters and looking through our own settings and config files and learning srvctl and crsctl commands from their examples. Also googling and OTN searching through the library full of documentation. . .
I still have yet to figure out if the private interconnect spoken about so frequently in cluster configuration documents are the binding to the set of node.vip address specifications in the tnsnames.ora (bound the the first eth adaptor along with the public ip addresses for the nodes) or the binding on the second eth adaptor to the node.prv addresses not found in the local pfile, in the tnsnames.ora, or the listener.ora (but found at the operating system level in the ifconfig). If the node.prv addresses are not the private interconnect then can anyone tell me that they are for? -
Found the errors in CSSD logs of RAC node
Found the below error in CSSD logs in One of RAC nodes from 5:15 to 5:18 PM, after this the error got disappeared. Could anyone please have an idea what could be the reason of this error.
Also, at that time we didn't find any errors in the alert log.
[ CSSD]2009-07-19 17:15:51.048 [3600] >TRACE: Authorization failed (112bd2a70), timed out, start 17:13:51.041, duration 120009
[ CSSD]2009-07-19 17:15:51.048 [3600] >TRACE: Authorization prepare time: 2 ms
[ CSSD]2009-07-19 17:15:51.233 [3086] >TRACE: clssgmClientConnectMsg: Connect from con(112b67930) proc(112b680b0) pid(1049540) proto(10:2:1:1)
[ CSSD]2009-07-19 17:15:51.268 [3600] >TRACE: Authorization failed (112bd4a10), timed out, start 17:13:51.268, duration 120003
[ CSSD]2009-07-19 17:15:51.268 [3600] >TRACE: Authorization prepare time: 3 ms
[ CSSD]2009-07-19 17:15:52.544 [3086] >TRACE: clssgmClientConnectMsg: Connect from con(112b67930) proc(112b680b0) pid(786918) proto(10:2:1:1)
[ CSSD]2009-07-19 17:15:53.297 [3600] >TRACE: Authorization failed (112c38af0), timed out, start 17:13:53.290, duration 120009
[ CSSD]2009-07-19 17:15:53.297 [3600] >TRACE: Authorization prepare time: 3 ms
[ CSSD]2009-07-19 17:15:53.317 [3600] >TRACE: Authorization failed (112d356f0), timed out, start 17:13:53.320, duration 120000
[ CSSD]2009-07-19 17:15:53.317 [3600] >TRACE: Authorization prepare time: 2 ms
[ CSSD]2009-07-19 17:16:02.342 [3086] >TRACE: clssgmClientConnectMsg: Connect from con(112b932b0) proc(112b67d10) pid(1336252) proto(10:2:1:1)
[ CSSD]2009-07-19 17:16:02.977 [3600] >TRACE: Authorization failed (112d04f70), timed out, start 17:14:02.978, duration 120001
[ CSSD]2009-07-19 17:16:02.977 [3600] >TRACE: Authorization prepare time: 2 ms
[ CSSD]2009-07-19 17:16:03.007 [3600] >TRACE: Authorization failed (112d38210), timed out, start 17:14:03.006, duration 120002
[ CSSD]2009-07-19 17:16:03.007 [3600] >TRACE: Authorization prepare time: 2 ms
[ CSSD]2009-07-19 17:16:10.447 [3600] >TRACE: Authorization failed (112bd7e30), timed out, start 17:14:10.441, duration 120007
[ CSSD]2009-07-19 17:16:10.447 [3600] >TRACE: Authorization prepare time: 2 ms
[ CSSD]2009-07-19 17:16:10.847 [3600] >TRACE: Authorization failed (112d3ee70), timed out, start 17:14:10.840, duration 120008
[ CSSD]2009-07-19 17:16:10.847 [3600] >TRACE: Authorization prepare time: 2 ms
Thanks,
MahiCheck the metalink note:
6996694-OCSSD.BIN CONSUMING 100% CPU AND ASM/DB HANGING -
Question on Rebooting RAC Nodes
Hi, I heard that when rebooting all RAC nodes, one has to wait at least 5 minutes between each node reboot. So you would reboot node 1 at 0 time, node 2 5 minutes later etc.
However, I could not find any documentation on this, can someone please point me to the right place to look? Thanks.I have not heard that before. I generally use srvctl to stop/start the databases, I do not think it waits 5 minutes between starting nodes as it does not take 15 minutes to stop/start the databases. As far as rebooting the hosts, the only time interval between machines was the time it took to send the reboot command to the host.
Maybe you are looking for
-
Installing 11i apps on windows xp and Red Hat linux AS 3.0
Hi, I am a newbie to Oracle E-business suite............i will be very helpful if anybody could help me with the full procedure on how to install Oracle apps on windows on Windows XP and Red Hat linux AS 3.0.........starting with configuring ip.....i
-
Problems In the Special G/L Transaction
Hy people, I have the following problem: The same vendor can be service, material and productive. I have it registered only once (at the request of the audit). He is classified as an account of conciliation 213007 (material). I can´t register this v
-
My Itouch still won't connect to my network. My Xbox live and Macbook are running just fine off of the router (Yes, I turned it off and on), and obviously know my password. The Itouch recognizes my network, but says it's unable to join. I've restored
-
How can I remove Babylon and put Google into toolbar?
How can I remove Babylon toolbar and put Google´s into my Firefox toolbar? Thanks
-
Motion path changes gets larger when copied to Shape Position parameter
Hello There, Richard Gerard has been helpful, and well as other people. I have sorta figured out how get a stroke to follow a motion path. I (so far) am unable to get a shape to follow the same motion path. My shape is a small ellipse commonly known