RAC on AIX 6.1 with HACMP

Hi
Can I have installation procedure and documents to Install 10gR2 RAC on AIX 6.1 using HACMP(for cluster control) instead of Oracle Clusterware. Is that possible ? anyone tried it before and share the experience.
Regards,
Akthar

Do you have any particular reason for using HACMP cluster control instead of CRS?
As you are going to install 10GR2 RAC So there is no need to use HACMP because 10G CRS can be installed without OS clusterware.
However CRS can be installed along with HACMP but oracle services should be controlled with CRS inly.
Regards
Rajesh

Similar Messages

  • Oracle 11g upgrade in AIX 6.1 with HACMP

    Hi Friends,
    As i have two Power Servers running in AIX 6.1 with oracle 10g in HACMP in which SAP application is running.
    The one is standalone Database and other is central Instance.
    I have done the 11g upgrades successfully in my DEV and QAS servers which are non-cluster Environment.
    Now i want to do the same upgrade in PRD which is in HACMP.
    Please let me know what are the areas should i concentrate specially for cluster environment servers.
    Thanks,
    Hari

    DB Filesystems
    Filesystem GB blocks Free %Used Iused %Iused Mounted on
    /dev/hd4 4.00 2.62 35% 15438 3% /
    /dev/hd2 8.00 5.03 38% 57744 5% /usr
    /dev/hd9var 4.00 2.85 29% 10914 2% /var
    /dev/hd3 4.00 3.50 13% 2575 1% /tmp
    /dev/fwdump 1.00 1.00 1% 13 1% /var/adm/ras/platform
    /dev/hd1 1.00 1.00 1% 6 1% /home
    /dev/hd11admin 0.25 0.25 1% 107 1% /admin
    /proc - - - - - /proc
    /dev/hd10opt 1.00 0.58 43% 9040 7% /opt
    /dev/livedump 0.25 0.25 1% 7 1% /var/adm/ras/livedump
    /dev/lv_oracle 2.00 1.86 8% 21 1% /oracle
    /dev/lv_ora_pip 2.00 2.00 1% 80 1% /oracle/PIP
    /dev/lv_usr_sap 2.00 1.92 5% 78 1% /usr/sap
    /dev/lv_sapmnt 2.00 0.62 70% 978 1% /sapmnt
    /dev/dumplv 95.00 32.80 66% 26790 1% /dump
    /dev/saparchlv 2.00 1.99 1% 57 1% /home/pipadm
    /dev/lv_pip_64 10.00 5.73 43% 18988 2% /oracle/PIP/102_64
    /dev/lv_mirlogA 1.00 0.61 40% 6 1% /oracle/PIP/mirrlogA
    /dev/lv_mirlogB 1.00 0.61 40% 6 1% /oracle/PIP/mirrlogB
    /dev/lv_oraarch 200.00 121.48 40% 433 1% /oracle/PIP/oraarch
    /dev/lv_oralogA 1.00 0.59 41% 8 1% /oracle/PIP/origlogA
    /dev/lv_oralogB 1.00 0.59 41% 8 1% /oracle/PIP/origlogB
    /dev/fslv01 2.00 1.97 2% 102 1% /oracle/PIP/saparch
    /dev/lv_sapbkp 5.00 5.00 1% 40 1% /oracle/PIP/sapbackup
    /dev/lv_sapchk 5.00 5.00 1% 80 1% /oracle/PIP/sapcheck
    /dev/lv_data1 200.00 86.26 57% 30 1% /oracle/PIP/sapdata1
    /dev/lv_data2 200.00 84.92 58% 26 1% /oracle/PIP/sapdata2
    /dev/lv_data3 200.00 84.92 58% 26 1% /oracle/PIP/sapdata3
    /dev/lv_data4 200.00 84.92 58% 26 1% /oracle/PIP/sapdata4
    /dev/lv_data5 200.00 84.92 58% 26 1% /oracle/PIP/sapdata5
    /dev/lv_data6 200.00 84.92 58% 26 1% /oracle/PIP/sapdata6
    /dev/lv_data7 200.00 84.92 58% 26 1% /oracle/PIP/sapdata7
    /dev/lv_data8 200.00 84.93 58% 26 1% /oracle/PIP/sapdata8
    /dev/lv_saporg 20.00 20.00 1% 7 1% /oracle/PIP/sapreorg
    /dev/saptrance 5.00 4.92 2% 588 1% /oracle/PIP/saptrace
    /dev/lv_inventry 2.00 1.99 1% 55 1% /oracle/oraInventory
    /dev/lv_102_64 10.00 5.05 50% 11044 1% /oracle/stage/102_64
    CI
    /dev/hd4 4.00 1.99 51% 14429 3% /
    /dev/hd2 8.00 5.01 38% 57680 5% /usr
    /dev/hd9var 4.00 3.38 16% 10936 2% /var
    /dev/hd3 4.00 3.82 5% 1362 1% /tmp
    /dev/fwdump 1.00 1.00 1% 18 1% /var/adm/ras/platform
    /dev/hd1 1.00 1.00 1% 55 1% /home
    /dev/hd11admin 0.25 0.25 1% 5 1% /admin
    /proc - - - - - /proc
    /dev/hd10opt 1.00 0.58 42% 9024 7% /opt
    /dev/livedump 0.25 0.25 1% 8 1% /var/adm/ras/livedump
    /dev/lv_oracle 2.00 2.00 1% 9 1% /oracle
    /dev/lv_ora_pip 2.00 2.00 1% 52 1% /oracle/PIP
    /dev/lv_usr_sap 10.00 10.00 1% 17 1% /usr/sap
    /dev/lv_client 2.00 1.86 8% 16 1% /oracle/client
    /dev/lv_smnt_pip 10.00 2.20 78% 114142 18% /sapmnt/PIP
    /dev/lv_sap_pip 10.00 8.10 19% 1577 1% /usr/sap/PIP
    /dev/lv_sap_cms 5.00 5.00 1% 8 1% /usr/sap/ccms
    root@pagedb:/ $ su - orapip
    pagedb:orapip 1> echo $ORACLE_HOME
    /oracle/PIP/102_64
    i have upgraded successfully in my DEV and QAS.
    So can i go with the same procedure as i went with non-cluster Env.
    Thanks

  • OSB 10.2.0.2 Implementation on AIX 5.2 with HACMP - SSL Trust Issues??

    Hello All
    I think I'm on a bit of a long shot with this one unfortunately, but I am trying to implement an OSB solution on a production HACMP cluster. The configuration would look as follows:
    OSB Admin & Media Host : Windows 2003 x86 (Host: FPTXOSB01)
    OSB Clients : Server 'pserver1' is node 1 in an HACMP cluster, public IP address 192.168.14.6
    : Server 'pserver2' is node 2 in the same HACMP cluster, pubic IP address 192.168.14.10
    : Server 'ptest1' is a stand alone AIX 5.2 host)
    OSB Version : 10.2.0.2.0
    I have implemented the solution on the stand alone host 'ptest1' without any problems, and performed a full database RMAN backup on this test servr at the first time of asking. The problem I am running into is with adding the HACMP clients to the OSB admin domain.
    HACMP is configured in such a way (rightly or wrongly I do not know as yet) with boot, public and cluster service addresses. Eg. Server 'pserver1' will return 'pserver1' if you enter the 'hostname' command at the AIX command prompt. Entering the 'uname -a' command also returns 'pserver1' as the machine host name. However, in the folder '/usr/local/oracle/backup/bin there is a link to a binary called 'hostinfo' and this is called by the installob routine during the installation phase. When I run this command manually, it returns the HACMP host boot address 'pserver1_boot'. The /etc/hosts file looks like this on one of the nodes:
    # Internet Address Hostname # Comments
    # 192.9.200.1 net0sample # ethernet name/address
    # 128.100.0.1 token0sample # token ring name/address
    # 10.2.0.2 x25sample # x.25 name/address
    127.0.0.1 loopback localhost
    10.10.10.86 pserver1_boot1 pserver1
    10.10.10.87 pserver2_boot1 pserver2
    10.11.10.86 pserver1_boot2
    10.11.10.87 pserver2_boot2
    10.12.10.86 pserver1_hb
    10.12.10.87 pserver2_hb
    192.168.14.5 pserver_svc
    192.168.14.6 pserver1_pers
    192.168.14.10 pserver2_pers
    As you can see, the main host name is tagged on the same line as the boot1 IP addresses. Unfortunately, the 10.10.10.xx range is private and dedicated to the HACMP cluster configuration. So the situation is, all of the clients on the network access the cluster via the 'pserver_svc' virtual IP, which is fine. The Oracle databases listen on that VIP too, no problems. For telnet/SSH access to the host, we log on via the '?_pers' addresses (persistent addresses), no problem. However, two hosts themselves see their own respective hosts as the '?boot1' name. So, on 'pserver1' if I were to ping 'pserver1' it resolves to the 10.10.10.86 IP. All good, however the OSB admin server is going to come in on the 192.168.14 public network.
    When adding the host using either the 'mkhost' command or the web tool, the host creation just sits there and eventually times out. If I change the '/etc/hosts' file such that 'pserver1' as en entry sits on a line on its own and configured with the correct persistent address of 192.168.14.6 and then try adding the host in OSB, the host adds okay. However, if I then try and ping the host using OSB, it returns the following:
    ob> pingh pserver1
    Error: can't connect to NDMP server on pserver1 (address 192.168.14.6) - timeout waiting for connection status message
    pserver1 (address 192.168.14.6): Oracle Secure Backup services are available
    Additionally, we have to switch the '/etc/hosts' configuration back because the HACMP cluster services expect that configuration and it will fail over if it performs a cluster host state check.
    With this in mind, we've introduced cabling on to another unused NIC port on the two hosts, and put these NICs on the network on 192.168.13.110 and 111. I have retried adding the hosts with the machines actual host name, with the boot address (pserver1_boot1) and also with a new alias for the new NICs of 'pserver1_en1'. In most of these cases, adding the host actually comes back with a success status. However, the OSB ping consistently fails.
    I believe that the mismatch in host names on each of the cluster hosts is causing the OSB trust relationships to break down as the certificates will be created with the non routable host/IP combination. The following is an extract of the 'observiced.log' from 'pserver2' following the host addition specifying the '192.168.13 .xxx' network:
    2009/01/07.14:33:53 listening for requests on --
    2009/01/07.14:33:53 en0 (10.10.10.87) port 400
    2009/01/07.14:33:53 en2 (10.11.10.87) port 400
    2009/01/07.14:33:53 en1 (192.168.13.111) port 400
    2009/01/07.14:34:01 listening for NDMP connections on --
    2009/01/07.14:34:01 en0 (10.10.10.87) port 10000
    2009/01/07.14:34:01 en2 (10.11.10.87) port 10000
    2009/01/07.14:34:01 en1 (192.168.13.111) port 10000
    2009/01/07.14:38:54 failure to negotiate SSL connection with component obtool on fd 6 - SSL fatal alert during negotation (FSP Oracle network security functions)
    I am clearly looking for help from anyone else who has had the unfortunate experience of implementing OSB in an HACMP environment. Speaking to people who work with HACMP tell me that the configuration is perfectly normal. To me, its odd that machine called one thing should return another value when it looks up itself, one that isn't routable.
    If anyone can suggest anything that might help, additional tracing, manually creating SSL certificates to work around the host name, disabling SSL, anything that might allow two way communications on ports 400 and 10000 using the OSB tools.
    Any helps here would be much appreciated.
    Regards
    Simon

    I already have.
    Thanks,

  • What is restriction on HOSTANEM as a name to install ORACLE RAC on AIX

    Hi all..
    we plan to install new Oracle RAC on AIX 64 bit with 6.1 version . we need to know what is restriction on hostname ..like it should not contain dash character or not exceed X Character ...
    Best Regards,
    Mohammed

    Check if this thread is relevant
    Single NIC card and RAC ???
    Thanks,
    Ajay More
    http://www.moreajays.com

  • 10G RAC on AIX without ASM & HACMP.

    Hi,
    I want to install ORACLE 10G RAC on AIX but I dont want ot use ASM or HACMP/GPFC.
    Just want to install with CRS and RAW devices.Is it possible to install 10g RAC with CRS and RAW devices.
    What is the best approach for this.
    Regards
    MMU

    We're running CRS on AIX. No ASM or HACMP.
    We do have the db datafiles on GPFS. We've also got one voting disk on GPFS and two on raw devices.

  • Cannot install CRS on AIX 5.3 ML09 with HACMP 5.4.1

    We have a two-node HACMP cluster, it's handling the networking and storage. (raw LV's) It's a fairly simple setup. I followed the instructions in document 404474.1 "Status of Certification of Oracle Clusterware with HACMP 5.3 & 5.4" to ensure it's compatible.
    Full OS and software Versions:
    AIX 5.3 ML9 (53-09_SP1_5300-09-01-0847)
    HACMP 5.4.1.4
    Oracle 10gR2 (10.2.0.1 from the install media, DBA will be updating to .3 or .4 after install)
    We've run the cluvfy script. It does complain about some missing patches; however, I've verified that none apply to our system. Ie, some of the patches apply to previous AIX ML, etc. Cluvfy does, however, detect the presence of the cluster and successfully collects the networking info from both nodes.
    So, the cluster is running, we run rootpre.sh successfully on both nodes. It properly detects the presence of the cluster and successfully makes several changes to the system.
    Next, we fire up the installer. (runInstaller) We provide it with the details for the various directories and what-not, everything is successful until we get to the "Specify Cluster Configuration" screen. It's blank. For some reason, it's not talking to the HACMP and can't acquire any of the cluster configuration data. There are no errors in any logs. We ran the installer through truss at the request of Oracle support, but it didn't seem to show us anything useful.
    Has anyone experienced this before? Is there something we need to do in order for the installer to communicate with HACMP?
    Thanks!
    Adam

    Dear Kushan,
    Few hints from my side
    1) For ECC 6.0 EHP4 -> First ECC 6.0 will be installed on NW7.01 stack. Later you will need to use ehpi tool to upgrade to EHP4.
    2) For SCM 7.0 plan the resource allocation for Livecache and Optimizer server. Ensure that they have ample resources for operation.
    Regards,
    Deepak Kori

  • RAC Newbie: Does RAC on AIX require HACMP?

    I've never installed/configured RAC before, and the documentation I'm finding has conflicts on whether HACMP needs to be installed. One FAQ states the following:
    Is HACMP needed for RAC on AIX 5.2 using GPFS file system?
    The newest version of GPFS can be used without HACMP, if it is available for AIX 5.2 then you do not need HACMP
    Another documentation article states HACMP is REQUIRED for 9i RAC on AIX.
    Does anyone know the real answer to this question? Our configuration is AIX 5.3, GPFS 2.1, Oracle 9.2.0.4. Thanks in advance!!

    The latest information from Oracle says:
    Oracle9i RAC always requires HACMP.
    HACMP is optional for Oracle Database 10g RAC.
    See details in metalink note
    IBM General Parallel File System (GPFS) and Oracle RAC on AIX 5L and IBM eServer pSeries
    Note:302806.1
    Werner

  • Oracle 9i rac waits+aix

    rac waits after restarting database.
    buffer busy global CR 6,083,927 1,386,593 48.20
    global cache cr request 40,081,544 960,533 33.39
    buffer busy waits 5,081,718 428,610 14.90
    PX Deq: Signal ACK 17,248 42,099 1.46
    db file sequential read 3,176,639 20,033 .70
    please state where is the problem

    Hi,
    GPFS is not free, and needs to be purchased.
    ONLY GPFS 2.3 is certified with RAC as for today.
    Certification for 3.1 ion under way.
    About 9iRAC and HACMP on AIX 5.3, ONLY HACMP 5.1,5.2 and 5.3 are supported, not yet HACMP 5.4. For info, 10gRAC is only supported with HACMP 5.1 and 5.2.
    To find out how to setup HACMP for a 9iRAC installation, you can use the following document, available on http://www.oracleracsig.org :
    CookBook V3.2 - Oracle 9iRAC on IBM@server pSeries running AIX5L
    (Step-by-step installation guide for 9iRAC on AIX5L. Whith HACMP for database on concurrent raw devices And IBM GPFS for database on shared cluster filesystem. Including HACMP and GPFS setup.
    The document covers HACMP 5.1 or 5.2, not 5.3 release, but it should be nearly the same with some screen changes.
    Point which is different with the cookbook for now, it's the way to create the lv (logical volume), you should use the "-T O" options for it.
    Hope it will help.
    Regards.
    Fred.

  • 10g R2 RAC in AIX

    Hello,
    I always work with Linux (red hat) to build our RAC clusters, and I never have seen "abnormal" performance and stability issues.
    Well, now I'm in a project to build a RAC in AIX 5.3. Somebody please can share the experience on this plataform? What is the "best practice" use or not HACMP? I've search in metalink and there's a lot of bugs related to Clusterware in AIX, the system is stable with RAC?
    Thanks.

    Hi user572788,
    HACMP is optional option for RAC on AIX, start with 10g, Oracle Clusterware doesn't depends on vendor cluster. I have a RAC 10g on AIX running with HACMP too, as long as you configured correctly and in certification matrix, you shouldn't see any problems. For me RAC on AIX is quite stable but still has a small issues. No system is perfect in this world
    Cheers
    http://fiedizheng.blogspot.com/

  • RAC on AIX

    Does RAC on AIX require HACMP or GPFS?. I think these are licensed products of IBM. Can't I use CRS without HACMP or GPFS?.
    OS: AIX 6.1
    DB : 10.2.0.4

    Hi Boochi,
    Yes. It is possible!
    See on http://download.oracle.com/docs/cd/B19306_01/install.102/b14201/storage.htm#sthref602
    You must use raw devices to store OCR and Voting disks and ASM to store database files
    Regards,
    Rodrigo Mufalani
    htp://mufalani.blogspot.com

  • Can ASM dose work with HACMP? (AIX5L)

    I installed Oracle RAC + ASM + HACMP on our server, because I need run oracle RAC and our application on same server.
    Dose ASM maybe not work with HACMP?

    Posting just once the same thread is just enough. This thread will be continued at : Can I use ASM?
    ~ Madrid.

  • SE 11g2 RAC in AIX

    Hi.
    Can I use Oracle 11g R2 (SE) RAC on AIX platform if one node on processor "POWER 6" and second node on processor "POWER 7"?
    Regard
    Spencer

    Ty Helios:
    I read this documents before post thread and hasn't found the answer to question about different processor within cluster.
    Ty Werner:
    Please post always a 4-digit version number, not only Oracle marketing labels.Oracle Standard Edition Database 11.2.0.1.0.
    11.2.0.2 is certified for Single Instance ONLY Can you post link on documentation about this ?....
    In general I prefer same configuration in a RAC environment, even if some differences are tolerated. If one node is much more powerful than the other(s), the >whole internal RAC handling is likely confused.
    Technically it's possible to install 11.2.0.1 in such an environment.Thanks for the help. It's nice.
    Regard
    Spencer

  • Error initializing LiveCycle ES3 on AIX, Websphere 7 with DB2 9.5

    Hello,
    I'm having a problem during configuration of LiveCycle ES3 on an AIX 6.1 with WebSphere 7.0.0.25 and DB2 9.5 on the same machine.
    I'm getting following error:
    com.adobe.livecycle.lcm.core.LCMException[ALC-LCM-000-000]: Failed on step 'Invoking component bootstrapper' for task 'Bootstrapping DocumentServiceContainer'
    ALC-TTN-103-000: Bootstrapping request failed on server.  Message from server:
    ALC-TTN-011-031: Bootstrapping failed for platform component [DocumentServiceContainer].  The wrapped exception's message
    reads:
    See nested exception; nested exception is: com.adobe.pof.schema.ObjectTypeNotFoundException: Object Type: dsc.proxy_permissions not
    found.
    Check application server logs for details.Bootstrapping Error: ALC-TTN-103-0000
            at com.adobe.livecycle.lcm.headless.HeadlessLCMImpl.bootstrapPlatform(HeadlessLCMImpl.java:4 00)
            at com.adobe.livecycle.lcm.headless.HeadlessLCMImpl.bootstrapPlatform(HeadlessLCMImpl.java:2 82)
            at com.adobe.livecycle.lcm.cli.InitializeLiveCycleCLI.executeCommandLineImpl(InitializeLiveC ycleCLI.java:81)
            at com.adobe.livecycle.lcm.cli.LCMCLI.execute(LCMCLI.java:299)
            at com.adobe.livecycle.lcm.cli.LCMCLI.main(LCMCLI.java:344)
    Caused by: com.adobe.livecycle.bootstrap.BootstrapException: ALC-TTN-103-000: Bootstrapping request failed on server.  Message from server:
    ALC-TTN-011-031: Bootstrapping failed for platform component [DocumentServiceContainer].  The wrapped exception's message
    reads:
    See nested exception; nested exception is: com.adobe.pof.schema.ObjectTypeNotFoundException: Object Type: dsc.proxy_permissions not
    found.
    Check application server logs for details.
            at com.adobe.livecycle.bootstrap.client.BootstrapRequestClient.analyzeResponse(BootstrapRequ estClient.java:152)
            at com.adobe.livecycle.bootstrap.client.BootstrapRequestClient.bootstrap(BootstrapRequestCli ent.java:63)
            at com.adobe.livecycle.bootstrap.client.BootstrapManager.executeStep(BootstrapManager.java:2 03)
            at com.adobe.livecycle.lcm.headless.HeadlessLCMImpl.bootstrapPlatform(HeadlessLCMImpl.java:3 93)
            ... 4 more
    I already searched within this forum, but i did not find a topic, wehere the solution has been helpful for me.
    So i wonder, if you have any idea to solve my problem.
    The server type on the WAS is Cluster.
    Thanks and best regards,
    Coopar8502

    > MOS-01109  Needed space on mountpoint /usr is 100000 KB, but got only 41736 KB.
    > /dev/hd2        1984.00     40.76   98%    42811    63% /usr
    The system says it needs 100 GB on /usr but you provide on 42.
    Markus

  • RAC and AIX and NetApp

    Hi everybody,
    I can find numerous certification statements confirming RAC 9iR2 runs on AIX.
    I can also find certifications that NetApp will support 9iR2 RAC.
    I haven't yet found a certifiaction statement covering all three.
    Has anybody out there implemented 9iR2 RAC on AIX on a NetApp device?
    Adrian

    ORA-600 is Oracle internal error. Most likely you hit a bug somewhere.
    Login to metalink check
    What is an ORA-600 Internal Error?
    Doc ID: Note:146580.1
    and use
    ORA-600/ORA-7445 Troubleshooter
    to find out if this is known issue.
    Otherwise Oracle support will be able to help.

  • Question: Rac Install Aix With HACMP

    Hello,
    I will be installing Rac on 11g aix and will be using raw partitions to configure OCR & voting disks without using HACMP. I however have the HACMP file sets installed, will this affect my install or cause any problems.

    Hi There
    I had issues installing 10.2.0.1 CRS software.. not too sure about 11g however in principle this will have a problem .. We had to cleanup the filesets.
    You will have issues when you run root.sh and will error message like following
    "Failure at final check of Oracle CRS stack"
    10
    # Find out AIX Filesets.
    lslpp -l |grep -i hacmp
    # Uninstall file sets
    HACMP filesets
    RSCT filesets
    Make usre you remove /opt/ORCLcluster directory .. and follow the CRS reinstall metalink doc if you have already tried installing CRS once.
    Hope this helps
    Thanks
    Prashant

Maybe you are looking for