RAC on Windows 2k3 using NAS.

Hi All
I am planning to install RAC on Windows 2k3.
Please anyone upload or post a link to the documentation on installing the RAC on Windows 2k3 using NAS.
Thanks a ton in advance.
-Bal

Hi
I searched a lot but didnt get anything. I am stuck becoz we dont have system admin or storage admin available.
I have 2 Dell 2950 PowerEdgde Servers and 500 GB Buffalo NAS with Windows 2K3 X64 EE, please tell me whether I can install Oracle RAC with this kit.
If yes , how can I configure shared storage and present it to OS so that both nodes can see it.
Please give as much detail as possible, I m ready to read a million pages.
Please help..

Similar Messages

RAC on Windows with NAS

Hi,
I'm working on installing a 11.2.0.3 2-node RAC on Windows 2008R2 64bit, with an EMC NAS for shared storage.
From my research, this configuration is possible through
1) iSCSI (MOS note ID 1054027.1)
or
2) Direct NFS
Network attached storage (NAS) systems use a network file system (NFS) to access data. You can store Oracle RAC data files and recovery files on a supported NAS server using the Oracle Direct NFS client. (Grid Infrastructure Installation Guide)
or
3) ASM
You can place voting disks and OCR files either in an Oracle ASM disk group, or on a cluster file system.
Oracle recommends that you choose Oracle ASM as the shared storage option for the database data files and recovery files.
Can/should the above be used in combination with each other? Please correct me if I'm wrong, but is iSCSI the only means of sharing the OCR/voting disk files? Perhaps my confusion comes from a misunderstanding of each options specific functionality.

1. Is Oracle RAC 11.2.0.4 on Windows 2012 supported with storage - NAS.
2. If we use NAS, can we use ASM or shared file system to install process
3. Do we have any performance impact if we use NAS
1. Yes, it is supported.
2. You should be able to use ASM or a shared (clustered) file system. Talk with your NAS vendor.
3. I run Oracle RAC on NAS and it works fine for us. However, NAS is TCP/IP connected and wont' be as fast as a SAN with top Fibre Channel connectivity.
When deploying Oracle RAC on NAS (or any other storage for that matter), work with the storage vendor. They should be able to provide you information on how to set it up correctly to support Oracle RAC databases.
Cheers,
Brian

Oracle 10g RAC on Windows

Installed Oracle 10g RAC on Windows... Everything was
working fine, now when I install CRS it completed at 100% and then in the configuration it gives error
INFO: exitonly tools to be excuted passed: 0
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/install/crssetup.config.bat
PROT-1: Failed to initialize ocrconfig
Step 1: checking status of CRS cluster
Step 2: creating directories (C:\oracle\product\10.2.0\crs)
Step 3: configuring OCR repository
ocr upgrade failed with (-1)
Execution of the plugin was aborted
INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" was canceled.
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\crs
Configuration directory is set to C:\oracle\product\10.2.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
I am using VMware WorkStation 5
http://www.oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnWindows2003UsingVMware.php
I can see my disks from both machines. Open the "Computer Management" dialog (Start > All Programs > Administrative Tools > Computer Management
I use Windows XP SP2 as the host operating system
Any suggestion?
Message was edited by:
MEXMAN

You know its not certified?
My first thought when I read the subject of this thread, and before reading what you posted, is that you've either done no research on RAC or didn't understand what you've read.
You can create a RAC cluster using any operating system certified by Oracle.
But the operating system is the least important part of creating a cluster. The questions you need to be able to address are:
1. What is your solution to created shared storage?
2. What is your solution to create the cache fusion interconnect and VIPs?
If you don't have an answer to these questions you can not build a RAC cluster.

How to install RAC on windows

Can anyone tell me step by step how to install RAC on windows advanced server. I want to know whether RAC must need Microsoft Clust Service. When I create a cluster with clustersetup.exe, I'm told that it's need oracle partition, but I don't know how to make it.
thanks advance!

Hi, I am Nirmal ([email protected]) Please try this out
Requirements:
H/W: External shared hdd
RAM: 256 MB
OS:win Advance server ,win 2000
PATCH:
The Windows CFS and Clusterware Patch for 9.2.0.6 -- available in Metalink under Patch number 3973928
The 2.2.0.18.0 Oracle Universal Installer -- available in Metalink under Patch number 2878462
The 9.2.0.6 RDBMS patchset -- available in Metalink under Patch number 3948480
1.Install shared disk array.
2.Install cluster interconnect and public Network hardware
a)Create two entries of NIC-Ensure Public IP listed at the top and private IP should be listed below the public IP.
b)Inter connection between two nodes are connected by switch.
3.Ensure the IP/Hostname of all node is entered in hosts file.
4.Ensure the temp /tmp directories are same accross all node.
5.Ensure that all nodes have same local admin name which has full access on the oracle home drive and win home drive.
6.Run the final clustercheck which is available in patch 3973928 which will check the above process if any incorrect it will indicate.(Location is 3973928\Disk1\preinstall_rac\clustercheck subdirectory).
7.Prepare the Logical Drives in Windows dont format or give any drive letter.
8.Install and Configure Cluster software with RAW Datafile.
a)Install oracle home on NTFS partitions and Datafile on Shared Logical Partition.
9.Run Oracle cluster setup wizard.
a)Click clustersetup command line.
b)A welcome page launches click next.
c)Create a cluster. click next.
d)Choose "user private network for interconnect" and click Next.
e)Network config page appears, enter the cluster name. then enter the public hostname for all nodes. Accept the default or change as appropriate for your cluster configuration. click next.
f)Cluster file system option page appears. Choose No Cfs. click next.
g)Disk config page appears. Click "Create Oracle Symbolic links button" label as srvcfg to the partition we have created.
h)Oracle Object link Manage window appears:
     1)From symbolic Link column, select an empty row.
     2)Type in the desired datafile link name and hit enter to save
     3)click apply button to commit.
     4)When the progress bar at the bottom of the screen stops      moving choose close.
i)VIA Detection screen appears. Choose yes or no depending on your config.(VIA-Virtual Interface Architecture).
j)Install location screen appears. its default win_home\system32\osd9i accept .click finish.
k)Cluster setup window appears if no error it will complete and close automatically.
l)Check the serices,
     1.oracleobjectservice
     2.oracleCMService9i
(if any error check the error log)
10.Install the 22018 OUI
a)home oracle_home.
b)Click all nodes and install.
11.If necessary install RDBMS Software into oracle home.
RAC Database using DBCA::
a)Create listeners using Net configuration assistant on each node
b)Run DBCA from command prompt.
c)Welcome page displays with the selection to create a cluster or
single instance database. choose oracle cluster database. next
d)Operation page is displayed. choose create database. Next.
e)Node selection page. Select all nodes. Next.check OracleGSDService
is running on all nodes.
f)Database Templates page is displayed. Choose new database. next.
g)Database Identification page. Enter the Global Database name and
SID (oracle will register SID prefix with a number, this will
become the SID of each node.)
h)Option page for java and inter media database. Choose according to
your need.
i)Connection option select dedicated or shared server .
j)Initialization parameter page. Add required values.
k)Database storage window.(ensure the storage information points to
the symbolic links specified in cluster.)
l)Creation page displayed, click finish.
m)DBCA summary page click create database and ok.
Note:
1)During Java creation it may slow down or hang. Check the CPU
usage and at 95-99% it will slow down please wait check the log.
2)ORA-29807 error may come. Ignore it its a (bug 2925665).
3)alter installation run the script prvtxml.plb, utlrp.sql
4)Any other error please check the alert log.
Message was edited by:
user474717

Advantages/Disadvantages of installing Oracle RAC on Windows 2003 VS Linux

Hello Guys,
I am not very good with linux, have to create a Oracle RAC environment using dataabse 10g.
I just need to know the advantages/disadvantages of configuring RAC on windows and on linux operating system.
Please help me with this. Please also specify what is the best available windows and linux version to configure RAC.
Regards,
Imran

Go with th eOS you have the skills in, if you have onsite expertise in windows then it makes no sense to use Linux because some guy on the internet says its better. Windows can be a highly available server OS when is managed by professional well quallified adminstrators.
Personally I would use linux because I am more familiar with the OS than windows. I also find oracle makes more sense on a *NIX type platform but there are shops that run oracle on windows with the required high availability.

11g R2 - 2 node RAC on Windows X64 2003 Server

hi
we are soon going to start building a 2 node 11g R2 RAC on Windows X64 2003 server
questions
1. In 11g R2, is creating 2 disk group DATA and FRA still considered the best practice?
2. On which disk group should we place the OCR and Voting Disk
3. If there are issues placing OCR and Voting Disk on ASM (there definitely appears to be some concerns / reported issues on this), is using OCFS2 still a viable option?
4. Can someone point us to a document such as step by step installation of 11g R2 RAC on Windows with ASM or best practices 11g R2 RAC on Windows?
thanks

A bit late maybe, but you can check Note 811271.1 - RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows).
Edited by: olmartins on Jun 2, 2010 11:53 AM

Requeriments OS for installation Oracle 11g RAC in Windows 2003

I plan to install Oracle 11g Standard with RAC in Windows 2003 Server.
I will use 2 nodes with the same OS.
I will use a SAN with fibre channel, to store the DB.
It is possible to install Oracle RAC in W2003 Standard ?
I need obligatory W2003 Enterprise?
The cluster of the 2 nodes is made by OS or by Oracle Clusterware?
Thanks in advance.

You can install on Windows 2003 Standard, it works with this OS. On the other hand the cluster is configured by the oracle clusterware. You need to make absolutely sure you are able to write from both nodes to the shared storage. Specific details on the regedit parameters you have to configure and specific OS issues are detailed at the above reference Werner posted.
~ Madrid

Please save me(rac on windows)

Hi
Hey guys I am into Oracle Real Application Cluster Setup on widows 2000. I am doing it for demo purpose only so I am not using high-end hardware devices like SAN box (Storage Area Network) or RAID etc. What I am using is two desktop machines with sufficiemt RAM and hard disk.
At one of my machines I have made two extended logical partiotions for setting up cluster. I have installed oracle 9i on both the machines . but when i try to install oracle cluster file system I get an error prki-2016 which states that ocfs cannot detect disk partitions.
Friends this is a kind of R&D. Please tell me is it possible to setup RAC this way on minimal hardware. I would be thankful if you help me in pulling this one off.
Please provide all your suggestions whatever comes to your mind.
Thanks

Hi,
Found an article on OTN about using linux to do it on the cheap but not sure about windows....
http://www.oracle.com/technology/pub/articles/hunter_rac10g.html
Think it needs to be some sort of external disk array but never setup rac on windows so not sure. The above article uses firewire....
If you've got access to metalink loads of articles/notes on rac on there - step by step guides and faqs etc...

Using NAS devices inside zone clusters

I was reading the docs regarding using NAS devices with Sun Cluster. It mentioned installing a vendor supplied package onto each cluster node to support their NAS, for example, NetApp has the NTAPclnas package. We are using Hitachi HNAS and I doubt they have a an equivalent package. (I'm looking into this but my hopes are not high)
What exactly do I need this for? Are there any problems with simply adding the NFS mounts I need to the /etc/vfstab of each zone cluster node?
In my case I will be running our oracle dev/test databases on NFS file-systems and our production clusters will use NFS file-systems for writing RMAN backups into. We aren't using RAC (today) but quite possibly will be moving to RAC in the future.
I was just curious what the level of integration detailed in http://download.oracle.com/docs/cd/E19680-01/html/821-1556/ewplp.html#eyprn provided? Also will using a vanilla /etc/vfstab approach work if Hitachi doesn't have such a package available.
Thanks for any info.

IIRC, that package provides locking and fencing support. You need to be able to ensure that nodes that are not supposed to be able to write to a piece of shared storage cannot do so. With an NFS server, this is done by revoking the share. The second part is NFS lock release.
So, if you don't have this package, you don't have these features. Without fencing control, you risk data integrity. Without lock release, you risk not being able to access your files.
That said, there are some circumstances when you probably don't need them. Just dumping RMAN backups to a dump area may be OK. I don't know quite enough about RMAN to comment.
Tim
---

Rac on windows.

Is there any specific performance challenges or CRS issues or difficult troubleshooting on windows because of which very less customer are on windows

888114 wrote:
Is there any specific performance challenges or CRS issues or difficult troubleshooting on windows because of which very less customer are on windowsThe challenge is equal to the Unix/Linx environment, what changes is your knowledge and experience in managing Clusterware and Windows. If you do not have expertise in managing Windows, will be like manage any OS for the first time.
I always say that a good DBA (Especially Grid Administrator) must be familiar with the Platform and Storage Vendor that he is administering. Our work depends on it.
To some DBAs Oracle on UNIX/Linux is more pleasant to manage, but we must not forget that Oracle RAC on Windows is certified by Oracle Corporation, for small enterprises and large enterprises no restriction.
In the My Oracle Support you can find many documents to help you in this challenge. Search for "RAC on Windows"
*How to Monitor, Detect and Analyze OS and RAC Resource Related Degradation and Failures on Windows [ID 810915.1]*
Also you can use the CHM to simplify troubleshooting.
*How to Install Oracle Cluster Health Monitor (former IPD/OS) on Windows [ID 811151.1]*
Levi Pereira

Re-Installing Windows 7 Using Recovery Media (DVD's)

Notebook: HP-430 Notebook
OS: Windows 7 (64-bit)
HDD: 298 GB
When i newly bought my HP-430 notebook, I re-partitioned HDD using some other third party software.I created one additional partition (M:\). Here is the info, of how i had repartitioned....
C:\ - 100GB (changed from 284 GB to 100 GB).
D:\ - Did not make any changes.
M:\ - 184 GB (Created a drive by my self).
Then after some days for testing purpose i thought of using recovery manager. So i run the setup and chose the First option (System Restore) which said that it will only reformat the system drive (C:\), and will not perform any other HDD changes. But to my surprise it deleted/reformated the full HDD, and i lost all my documents, music, photos, and all my important files, which i had stored/backed up on M:\ (which i had created)....
Can some one tell me why the hack this happened.....????
Then now, next point. After recovery manager had restored the OS, i again repartitioned it, But this time with Windows Disk Management Tool. But Windows Disk Management didnt allow me to shrink(resize) the C:\(Systemdrive) less than 150 GB. So i resized C:\ to 150 GB from 284 GB, and created one more drive (M:\) of size 147 GB. And i deleted the Recovery Drive (D:\), but i have created the Recovery DVD's before deleting Recoevery Drive from my HDD.
Again now its time for me to reinstall Windows 7 using Recovery media, as i have messed up with some system files while installing a theme for Windows 7, and now my OS is completely unstable. So now i want to reinstall windows 7, but I cant understand which option to chose in recovery manager (when run from Recovery DVD's)
Options shown in recovery manager
1. Recover using Microsoft Recovery
2. System Recovery (The option which i had chosen for the first time and got all my stuff deleted)....it says it only reinstalls the OS and wont perform any other HDD changes.
3. Minimised Image Recovery
4.Factory Reset.
So now my question to you guys is that.......which option do i chose in recovery manager so that all my backed up content and my stuff on M:\ (which i created) wont be deleted..and the OS will be reinstalled.....
PLIZZZZZ HELPPPPPPPPPPPP.........................
This question was solved.
View Solution.

Hi,
I don't believe that any of the recovery options from the Disc will retain your custom partition - As far as I know, the only time you will get a prompt to keep a custom partition is when using the 'Minimized Image Recovery' option from the Recovery Partition D which you have removed.
You could try the following work-around.
Download the correct Windows 7 Disc Image from the link below - this must be exactly the same version as your OEM installation - ie if your notebook came with Windows 7 Home Premium 64bit this is the version you would need to download.
Windows-7 sp1-iso-official-32-bit-and-64-bit
Use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here.
Use the disc you create to perform the installation - when you get to the option to choose the type of installation, choose Custom and select the C partition.
When asked, enter the Windows activation key found on the underside of your notebook, then when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers you may need can be found starting Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How to install windows 8 using bootcamp with no optical drive

Hi,
I have a mac book pro 17" late 2011 with Mountain Lion installed.
I have previously installed a windows 7 using bootcamp without an optical drive by creating an install disk as part of boot camp option.
I still don't have an optical drive.
The other day I removed my Windows 7 since I want to try Windows 8 but when I try using boot camp to install windows 8 it is asking for an optical drive and the option to create an install disk is not available anymore.
Any idea on this issue?
Thanks much

Windows 8: enable Hyper-V, it really helps.
http://www.gizmodo.com.au/2012/03/windows-8-on-a-macbook-air-beautiful-and-kinda -broken/
http://www.windows-now.com/blogs/robert/hyper-v-3-0-confirmed-for-windows-8-clie nt.aspx
http://www.windows8update.com/2011/12/06/enabling-hyper-v-in-windows-8/
http://huguesval.com/blog/2012/02/installing-windows-7-on-a-mac-without-superdri ve-with-virtualbox/
Disable Windows 8’s Adaptive Brightness to Fix Dark Screen Problems
http://www.howtogeek.com/107173/disable-windows-8s-adaptive-brightness-to-fix-da rk-screen-problems/
It should be straight forward and no different, except you are burning an ISO and that always needs to be done at slowest burn speed for any version of Windows.Otherwise it won't work (even if it manages to install it will fail on restart or some other point).
Windows 8 Release Preview
http://msdn.microsoft.com/en-us/windows/apps/default
https://blogs.msdn.com/b/b8/?Redirected=true

Hi I have two questions. I am using NAS 4.1 and was wondering is it possible to set a different session timeout for different users? How is the session timeout set? Thanks, YS

<i>I am using NAS 4.1 and was wondering is it possible to set a different session timeout for different users?</i>
Um, there is no such thing as NAS4.1.
I'm assuming that you mean NAS4.0 (maybe NAS4.0sp1?). If so, then the session timeouts are specified in the session section of the NTV configuration files.
AFAIK, you can specify session timeouts on a per user basis.

I'm running windows XP using boot camp. What key do I push on the keyboard to bring up my desktop?

I'm running windows XP using boot camp. What key do I push on the keyboard to bring up/go to my desktop?

Have a look here http://en.wikipedia.org/wiki/Table_of_keyboard_shortcuts
Stefan

How to add entire new row at the top of table in pdf report from c# windows forms using iTextSharp

Hi for past 3 days i was thinking and breaking my head on how to add entire new at top table created in pdf report from c# windows forms with iTextSharp.
First: I was able to create/export sql server data in form of table in pdf report from c# windows forms. Given below is the code in c#.
using System;
using System.Collections.Generic;
using System.Configuration;
using System.Text;
using System.Data;
using System.IO;
using System.Data.SqlClient;
using System.Windows.Forms;
using iTextSharp.text;
using iTextSharp.text.pdf;
namespace DRRS_CSharp
public partial class frmPDFTechnician : Form
public frmPDFTechnician()
InitializeComponent();
private void btnExport_Click(object sender, EventArgs e)
Document doc = new Document(PageSize.A4.Rotate());
var writer= PdfWriter.GetInstance(doc, new FileStream("Technician22.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(7);
table.TotalWidth=585f;
table.LockedWidth = true;
PdfPTable inner = new PdfPTable(1);
inner.WidthPercentage = 115;
PdfPCell celt=new PdfPCell(new Phrase(new Paragraph("Institute/Hospital:AIIMS,NEW DELHI",FontFactory.GetFont("Arial",14,iTextSharp.text.Font.BOLD,BaseColor.BLACK))));
inner.AddCell(celt);
Paragraph para = new Paragraph("DCS Clinical Report-Technician wise", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK));
para.Alignment = iTextSharp.text.Element.TITLE;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(95f, 95f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn=new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select t.technician_id,td.Technician_first_name,td.Technician_middle_name,td.Technician_last_name,t.technician_dob,t.technician_sex,td.technician_type from Techniciandetail td,Technician t where td.technician_id=t.technician_id and td.status=1", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("ID");
table.AddCell("First Name");
table.AddCell("Middle Name");
table.AddCell("Last Name");
table.AddCell("DOB" );
table.AddCell("Gender");
table.AddCell("Designation");
while (dr.Read())
table.AddCell(dr[0].ToString());
table.AddCell(dr[1].ToString());
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString());
table.AddCell(dr[4].ToString());
table.AddCell(dr[5].ToString());
table.AddCell(dr[6].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(inner);
doc.Add(table);
doc.Close();
The code executes well with no problem and get all datas from tables into table in PDF report from c# windows forms.
But here is my problem how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
As the problem i am facing is my title or Header(DCS Clinical Report-Technician wise) is at top of my image named:logo5.png and not coming to it's center position of my image.
Second the problem i am facing is how to add new entire row to top of existing table in pdf report from c# windows form using iTextSharp?.
given in below is the row and it's data . So how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
as you can see how i create my columns in table in pdf report and populate it with sql server data. Given the code below:
Document doc = new Document(PageSize.A4.Rotate());
var writer= PdfWriter.GetInstance(doc, new FileStream("Technician22.pdf", FileMode.Create));
doc.SetMargins(50, 50, 50, 50);
doc.SetPageSize(new iTextSharp.text.Rectangle(iTextSharp.text.PageSize.LETTER.Width, iTextSharp.text.PageSize.LETTER.Height));
doc.Open();
PdfPTable table = new PdfPTable(7);
table.TotalWidth=585f;
table.LockedWidth = true;
Paragraph para = new Paragraph("DCS Clinical Report-Technician wise", FontFactory.GetFont("Arial", 14, iTextSharp.text.Font.BOLD, BaseColor.BLACK));
para.Alignment = iTextSharp.text.Element.TITLE;
iTextSharp.text.Image png = iTextSharp.text.Image.GetInstance("logo5.png");
png.ScaleToFit(95f, 95f);
png.Alignment = Element.ALIGN_RIGHT;
SqlConnection conn=new SqlConnection("Data Source=NPD-4\\SQLEXPRESS;Initial Catalog=DRRS;Integrated Security=true");
SqlCommand cmd = new SqlCommand("Select t.technician_id,td.Technician_first_name,td.Technician_middle_name,td.Technician_last_name,t.technician_dob,t.technician_sex,td.technician_type from Techniciandetail td,Technician t where td.technician_id=t.technician_id and td.status=1", conn);
conn.Open();
SqlDataReader dr;
dr = cmd.ExecuteReader();
table.AddCell("ID");
table.AddCell("First Name");
table.AddCell("Middle Name");
table.AddCell("Last Name");
table.AddCell("DOB" );
table.AddCell("Gender");
table.AddCell("Designation");
while (dr.Read())
table.AddCell(dr[0].ToString());
table.AddCell(dr[1].ToString());
table.AddCell(dr[2].ToString());
table.AddCell(dr[3].ToString());
table.AddCell(dr[4].ToString());
table.AddCell(dr[5].ToString());
table.AddCell(dr[6].ToString());
dr.Close();
table.SpacingBefore = 15f;
doc.Add(para);
doc.Add(png);
doc.Add(table);
doc.Close();
So my question is how to make my column headers in bold?
So these are my questions.
1. how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
2. how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
3.how to make my column headers in bold?
I know that i have to do some modifications to my code but i dont know how to do it. Can anyone help me please.
Any help or guidance in solving this problem would be greatly appreciated.
vishal

Hi,
>>1. how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
2. how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
3.how to make my column headers in bold?<<
I’m sorry for the issue that you are hitting now.
This itextsharp is third party control, for this issue, I recommended to consult the control provider directly, I think they can give more precise troubleshooting.
http://sourceforge.net/projects/itextsharp/
Thanks for your understanding.
Regards,
Marvin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

RAC on Windows 2k3 using NAS.

Similar Messages

Maybe you are looking for