RAC Pre-requisite Problem

I would like to set up a RAC environment between 2 different sites. They are physically seperated in 2 different district. The ISP of machine A used is different from the ISP of machine B used. Do they need to be the same ISP in order to be RAC? if yes, why?
Any solution for this? Thanks.

If you can implement a cluster solution over the distance then just 2 machines could do the job. As I had never afford a HP box with OpenVMS - cannot comment.
As these two machines are going to be using THE SAME STORAGE, where will it be located and how will it communicate - IE Fibre Channel?
IMO use a cluster at site A with a Standby DB at site B or Multimaster replicated DB between site A & B. You do say words to the effect that you want all 3 hosts to be doing work.
If the work at 'B' is just to run reports then a 'standby' DB will do. If You need to have clients connecting and updating data - use replicated.
Have one site produce odd sequence numbers and the other even numbers and use them as your primary keys.
Maybe you should consult you local Oracle Rep. Note: A DB in 'standby' waiting for a disaster still has to have it's own license (even though the primary is unavailable during disaster). So if you need to buy another license, get your money's worth and see what Oracle support reccommend.

Similar Messages

  • Is  Unix Cluster is Pre-requisite for RAC

    Hi ,
    Can anyone please clarify whether for the setup of RAC , does the Unix need to be in clusters?. Is it the pre-requisite for rac installing.
    Thanks in advance.
    Regards,
    Hussain

    Hi Hussain,
    No, you don't need another OS cluster, only RAC, but you can use another clusterware with RAC (eg. SUN Cluster and others).
    I recommend to you read http://download.oracle.com/docs/cd/B19306_01/rac.102/b28759/toc.htm
    Regards,
    Rodrigo Mufalani
    http://mufalani.blogspot.com

  • Failing all pre-requisite checks for 11.2.0.2.0 RAC on HP-UX Itanium 64

    Hi Guys,
    For Typical OR Advanced Grid Installation (GUI), all pre-requisites are failing on both nodes, like memory, swap, node reachability, groups, user & lot more.....
    But when I try to check Pre-requisite from command line, everything seems to be ok.
    This is what the output...
    $ ./runcluvfy.sh stage -pre crsinst -n sph1erp,sph2erp -fixup -verbose
    Performing pre-checks for cluster services setup
    Checking node reachability...
    Check: Node reachability from node "sph1erp"
    Destination Node Reachable?
    sph1erp yes
    sph2erp yes
    Result: Node reachability check passed from node "sph1erp"
    Checking user equivalence...
    Check: User equivalence for user "oracle"
    Node Name Comment
    sph2erp passed
    sph1erp passed
    Result: User equivalence check passed for user "oracle"
    Checking node connectivity...
    Checking hosts config file...
    Node Name Status Comment
    sph2erp passed
    sph1erp passed
    Verification of the hosts config file successful
    Interface information for node "sph2erp"
    Name IP Address Subnet Gateway Def. Gateway HW Address MTU
    lan2 10.10.16.51 10.10.16.48 10.10.16.51 10.10.1.12 78:AC:C0:8A:07:76 1500
    lan900 10.10.1.174 10.10.0.0 10.10.1.174 10.10.1.12 78:AC:C0:8A:07:6E 1500
    Interface information for node "sph1erp"
    Name IP Address Subnet Gateway Def. Gateway HW Address MTU
    lan2 10.10.16.50 10.10.16.48 10.10.16.50 10.10.1.12 3C:4A:92:48:71:BE 1500
    lan900 10.10.1.173 10.10.0.0 10.10.1.173 10.10.1.12 3C:4A:92:48:71:B6 1500
    Check: Node connectivity of subnet "10.10.16.48"
    Source Destination Connected?
    sph2erp[10.10.16.51] sph1erp[10.10.16.50] yes
    Result: Node connectivity passed for subnet "10.10.16.48" with node(s) sph2erp,sph1erp
    Check: TCP connectivity of subnet "10.10.16.48"
    Source Destination Connected?
    sph1erp:10.10.16.50 sph2erp:10.10.16.51 passed
    Result: TCP connectivity check passed for subnet "10.10.16.48"
    Check: Node connectivity of subnet "10.10.0.0"
    Source Destination Connected?
    sph2erp[10.10.1.174] sph1erp[10.10.1.173] yes
    Result: Node connectivity passed for subnet "10.10.0.0" with node(s) sph2erp,sph1erp
    Check: TCP connectivity of subnet "10.10.0.0"
    Source Destination Connected?
    sph1erp:10.10.1.173 sph2erp:10.10.1.174 passed
    Result: TCP connectivity check passed for subnet "10.10.0.0"
    Interfaces found on subnet "10.10.0.0" that are likely candidates for VIP are:
    sph2erp lan900:10.10.1.174
    sph1erp lan900:10.10.1.173
    Interfaces found on subnet "10.10.16.48" that are likely candidates for a private interconnect are:
    sph2erp lan2:10.10.16.51
    sph1erp lan2:10.10.16.50
    Result: Node connectivity check passed
    Check: Total memory
    Node Name Available Required Comment
    sph2erp 63.9GB (6.7004024E7KB) 4GB (4194304.0KB) passed
    sph1erp 63.9GB (6.7004024E7KB) 4GB (4194304.0KB) passed
    Result: Total memory check passed
    Check: Available memory
    Node Name Available Required Comment
    sph2erp 53.3556GB (5.5947372E7KB) 50MB (51200.0KB) passed
    sph1erp 52.2323GB (5.47695E7KB) 50MB (51200.0KB) passed
    Result: Available memory check passed
    Check: Swap space
    Node Name Available Required Comment
    sph2erp 188.7773GB (1.97947352E8KB) 4GB (4194304.0KB) passed
    sph1erp 188.7773GB (1.97947352E8KB) 4GB (4194304.0KB) passed
    Result: Swap space check passed
    Check: Free disk space for "sph2erp:/var/tmp/"
    Path Node Name Mount point Available Required Comment
    /var/tmp/ sph2erp /var 13.8074GB 1GB passed
    Result: Free disk space check passed for "sph2erp:/var/tmp/"
    Check: Free disk space for "sph1erp:/var/tmp/"
    Path Node Name Mount point Available Required Comment
    /var/tmp/ sph1erp /var 13.8158GB 1GB passed
    Result: Free disk space check passed for "sph1erp:/var/tmp/"
    Check: User existence for "oracle"
    Node Name Status Comment
    sph2erp exists(199) passed
    sph1erp exists(199) passed
    Checking for multiple users with UID value 199
    Result: Check for multiple users with UID value 199 passed
    Result: User existence check passed for "oracle"
    Check: Group existence for "oinstall"
    Node Name Status Comment
    sph2erp exists passed
    sph1erp exists passed
    Result: Group existence check passed for "oinstall"
    Check: Group existence for "dba"
    Node Name Status Comment
    sph2erp exists passed
    sph1erp exists passed
    Result: Group existence check passed for "dba"
    Check: Membership of user "oracle" in group "oinstall" [as Primary]
    Node Name User Exists Group Exists User in Group Primary Comment
    sph2erp yes yes yes yes passed
    sph1erp yes yes yes yes passed
    Result: Membership check for user "oracle" in group "oinstall" [as Primary] passed
    Check: Membership of user "oracle" in group "dba"
    Node Name User Exists Group Exists User in Group Comment
    sph2erp yes yes yes passed
    sph1erp yes yes yes passed
    Result: Membership check for user "oracle" in group "dba" passed
    Check: Run level
    Node Name run level Required Comment
    sph2erp 3 3 passed
    sph1erp 3 3 passed
    Result: Run level check passed
    Check: Hard limits for "maximum open file descriptors"
    Node Name Type Available Required Comment
    sph2erp hard 63488 63488 passed
    sph1erp hard 63488 63488 passed
    Result: Hard limits check passed for "maximum open file descriptors"
    Check: Soft limits for "maximum open file descriptors"
    Node Name Type Available Required Comment
    sph2erp soft 1024 1024 passed
    sph1erp soft 63488 1024 passed
    Result: Soft limits check passed for "maximum open file descriptors"
    Check: Hard limits for "maximum user processes"
    Node Name Type Available Required Comment
    sph2erp hard 3687 3686 passed
    sph1erp hard 3687 3686 passed
    Result: Hard limits check passed for "maximum user processes"
    Check: Soft limits for "maximum user processes"
    Node Name Type Available Required Comment
    sph2erp soft 3687 2047 passed
    sph1erp soft 3687 2047 passed
    Result: Soft limits check passed for "maximum user processes"
    Check: System architecture
    Node Name Available Required Comment
    sph2erp ia64 ia64 passed
    sph1erp ia64 ia64 passed
    Result: System architecture check passed
    Check: Kernel version
    Node Name Available Required Comment
    sph2erp HP-UX B.11.31 B.11.31 passed
    sph1erp HP-UX B.11.31 B.11.31 passed
    Result: Kernel version check passed
    Check: Kernel parameter for "ksi_alloc_max"
    Node Name Configured Required Comment
    sph2erp 32768 32768 passed
    sph1erp 32768 32768 passed
    Result: Kernel parameter check passed for "ksi_alloc_max"
    Check: Kernel parameter for "executable_stack"
    Node Name Configured Required Comment
    sph2erp 0 0 passed
    sph1erp 0 0 passed
    Result: Kernel parameter check passed for "executable_stack"
    Check: Kernel parameter for "max_thread_proc"
    Node Name Configured Required Comment
    sph2erp 1024 1024 passed
    sph1erp 1024 1024 passed
    Result: Kernel parameter check passed for "max_thread_proc"
    Check: Kernel parameter for "maxdsiz"
    Node Name Configured Required Comment
    sph2erp 1073741824 1073741824 passed
    sph1erp 1073741824 1073741824 passed
    Result: Kernel parameter check passed for "maxdsiz"
    Check: Kernel parameter for "maxdsiz_64bit"
    Node Name Configured Required Comment
    sph2erp 2147483648 2147483648 passed
    sph1erp 2147483648 2147483648 passed
    Result: Kernel parameter check passed for "maxdsiz_64bit"
    Check: Kernel parameter for "maxssiz"
    Node Name Configured Required Comment
    sph2erp 134217728 134217728 passed
    sph1erp 134217728 134217728 passed
    Result: Kernel parameter check passed for "maxssiz"
    Check: Kernel parameter for "maxssiz_64bit"
    Node Name Configured Required Comment
    sph2erp 1073741824 1073741824 passed
    sph1erp 1073741824 1073741824 passed
    Result: Kernel parameter check passed for "maxssiz_64bit"
    Check: Kernel parameter for "maxuprc"
    Node Name Configured Required Comment
    sph2erp 3686 3686 passed
    sph1erp 3686 3686 passed
    Result: Kernel parameter check passed for "maxuprc"
    Check: Kernel parameter for "msgmni"
    Node Name Configured Required Comment
    sph2erp 4096 4096 passed
    sph1erp 4096 4096 passed
    Result: Kernel parameter check passed for "msgmni"
    Check: Kernel parameter for "msgtql"
    Node Name Configured Required Comment
    sph2erp 4096 4096 passed
    sph1erp 4096 4096 passed
    Result: Kernel parameter check passed for "msgtql"
    Check: Kernel parameter for "ncsize"
    Node Name Configured Required Comment
    sph2erp 35840 35840 passed
    sph1erp 35840 35840 passed
    Result: Kernel parameter check passed for "ncsize"
    Check: Kernel parameter for "shmmax"
    Node Name Configured Required Comment
    sph2erp 1073741824 1073741824 passed
    sph1erp 1073741824 1073741824 passed
    Result: Kernel parameter check passed for "shmmax"
    Check: Kernel parameter for "shmmni"
    Node Name Configured Required Comment
    sph2erp 4096 4096 passed
    sph1erp 4096 4096 passed
    Result: Kernel parameter check passed for "shmmni"
    Check: Kernel parameter for "shmseg"
    Node Name Configured Required Comment
    sph2erp 512 512 passed
    sph1erp 512 512 passed
    Result: Kernel parameter check passed for "shmseg"
    Check: Kernel parameter for "tcp_smallest_anon_port"
    Node Name Configured Required Comment
    sph2erp 9000 9000 passed
    sph1erp 9000 9000 passed
    Result: Kernel parameter check passed for "tcp_smallest_anon_port"
    Check: Kernel parameter for "tcp_largest_anon_port"
    Node Name Configured Required Comment
    sph2erp 65500 65500 passed
    sph1erp 65500 65500 passed
    Result: Kernel parameter check passed for "tcp_largest_anon_port"
    Check: Kernel parameter for "udp_smallest_anon_port"
    Node Name Configured Required Comment
    sph2erp 9000 9000 passed
    sph1erp 9000 9000 passed
    Result: Kernel parameter check passed for "udp_smallest_anon_port"
    Check: Kernel parameter for "udp_largest_anon_port"
    Node Name Configured Required Comment
    sph2erp 65500 65500 passed
    sph1erp 65500 65500 passed
    Result: Kernel parameter check passed for "udp_largest_anon_port"
    Check: Package existence for "OS-Core-B.11.31( ia64)"
    Node Name Available Required Comment
    sph2erp OS-Core-B.11.31-0 OS-Core-B.11.31( ia64) passed
    sph1erp OS-Core-B.11.31-0 OS-Core-B.11.31( ia64) passed
    Result: Package existence check passed for "OS-Core-B.11.31( ia64)"
    Check: Operating system patch for "Patch PHKL_38938"
    Node Name Applied Required Comment
    sph2erp Patch PHKL_39646 Patch PHKL_38938 passed
    sph1erp Patch PHKL_39646 Patch PHKL_38938 passed
    Result: Operating system patch check passed for "Patch PHKL_38938"
    Check: Operating system patch for "Patch PHKL_39351"
    Node Name Applied Required Comment
    sph2erp Patch PHKL_40207 Patch PHKL_39351 passed
    sph1erp Patch PHKL_40207 Patch PHKL_39351 passed
    Result: Operating system patch check passed for "Patch PHKL_39351"
    Check: Operating system patch for "Patch PHSS_36354"
    Node Name Applied Required Comment
    sph2erp Patch PHSS_40546 Patch PHSS_36354 passed
    sph1erp Patch PHSS_40546 Patch PHSS_36354 passed
    Result: Operating system patch check passed for "Patch PHSS_36354"
    Check: Operating system patch for "Patch PHSS_37042"
    Node Name Applied Required Comment
    sph2erp Patch PHSS_37042 Patch PHSS_37042 passed
    sph1erp Patch PHSS_37042 Patch PHSS_37042 passed
    Result: Operating system patch check passed for "Patch PHSS_37042"
    Check: Operating system patch for "Patch PHSS_37959"
    Node Name Applied Required Comment
    sph2erp Patch PHSS_40804 Patch PHSS_37959 passed
    sph1erp Patch PHSS_40804 Patch PHSS_37959 passed
    Result: Operating system patch check passed for "Patch PHSS_37959"
    Check: Operating system patch for "Patch PHSS_39094"
    Node Name Applied Required Comment
    sph2erp Patch PHSS_40538 Patch PHSS_39094 passed
    sph1erp Patch PHSS_40538 Patch PHSS_39094 passed
    Result: Operating system patch check passed for "Patch PHSS_39094"
    Check: Operating system patch for "Patch PHSS_39100"
    Node Name Applied Required Comment
    sph2erp Patch PHSS_40540 Patch PHSS_39100 passed
    sph1erp Patch PHSS_40540 Patch PHSS_39100 passed
    Result: Operating system patch check passed for "Patch PHSS_39100"
    Check: Operating system patch for "Patch PHSS_39102"
    Node Name Applied Required Comment
    sph2erp Patch PHSS_41496 Patch PHSS_39102 passed
    sph1erp Patch PHSS_41496 Patch PHSS_39102 passed
    Result: Operating system patch check passed for "Patch PHSS_39102"
    Check: Operating system patch for "Patch PHSS_38141"
    Node Name Applied Required Comment
    sph2erp Patch PHSS_38141 Patch PHSS_38141 passed
    sph1erp Patch PHSS_38141 Patch PHSS_38141 passed
    Result: Operating system patch check passed for "Patch PHSS_38141"
    Check: Operating system patch for "Patch PHCO_40381"
    Node Name Applied Required Comment
    sph2erp Patch PHCO_40381 Patch PHCO_40381 passed
    sph1erp Patch PHCO_40381 Patch PHCO_40381 passed
    Result: Operating system patch check passed for "Patch PHCO_40381"
    Check: Operating system patch for "Patch PHKL_38038"
    Node Name Applied Required Comment
    sph2erp Patch PHKL_41005 Patch PHKL_38038 passed
    sph1erp Patch PHKL_41005 Patch PHKL_38038 passed
    Result: Operating system patch check passed for "Patch PHKL_38038"
    Checking for multiple users with UID value 0
    Result: Check for multiple users with UID value 0 passed
    Check: Current group ID
    Result: Current group ID check passed
    Starting Clock synchronization checks using Network Time Protocol(NTP)...
    NTP Configuration file check started...
    Network Time Protocol(NTP) configuration file not found on any of the nodes. Oracle Cluster Time Synchronization Service(CTSS) can be used instead of NTP for time synchronization on the cluster nodes
    No NTP Daemons or Services were found to be running
    Result: Clock synchronization check using Network Time Protocol(NTP) passed
    Checking Core file name pattern consistency...
    Core file name pattern consistency check passed.
    Checking to make sure user "oracle" is not in "root" group
    Node Name Status Comment
    sph2erp does not exist passed
    sph1erp does not exist passed
    Result: User "oracle" is not part of "root" group. Check passed
    Check default user file creation mask
    Node Name Available Required Comment
    sph2erp 022 0022 passed
    sph1erp 022 0022 passed
    Result: Default user file creation mask check passed
    Checking consistency of file "/etc/resolv.conf" across nodes
    Node Name Status
    sph2erp passed
    sph1erp passed
    The DNS response time for an unreachable node is within acceptable limit on all nodes
    File "/etc/resolv.conf" is consistent across nodes
    Check: Time zone consistency
    Result: Time zone consistency check passed
    Checking settings of device file "/dev/async"
    Node Name Available Comment
    sph2erp yes failed (incorrect setting for minor number.)
    sph1erp yes failed (incorrect setting for minor number.)
    Result: Check for settings of device file "/dev/async" failed.
    Starting check for The SSH LoginGraceTime setting ...
    WARNING:
    PRVE-0038 : The SSH LoginGraceTime setting on node "sph2erp" may result in users being disconnected before login is completed
    PRVE-0038 : The SSH LoginGraceTime setting on node "sph1erp" may result in users being disconnected before login is completed
    Check for The SSH LoginGraceTime setting passed
    Fixup information has been generated for following node(s):
    sph2erp,sph1erp
    Please run the following script on each node as "root" user to execute the fixups:
    '/tmp/CVU_11.2.0.2.0_oracle/runfixup.sh'
    Pre-check for cluster services setup was unsuccessful on all the nodes.
    What could be the issue ????
    Any help would be appreciated...
    Regards,
    Manish

    Started with Grid Installation. Copying Software to remote node & linking libraries were successfully without any issue (upto 76%). But got issue while executing root.sh on Node1
    sph1erp:/oracle/11.2.0/grid #sh root.sh
    Running Oracle 11g root script...
    The following environment variables are set as:
    ORACLE_OWNER= oracle
    ORACLE_HOME= /oracle/11.2.0/grid
    Enter the full pathname of the local bin directory: [usr/local/bin]:
    Copying dbhome to /usr/local/bin ...
    Copying oraenv to /usr/local/bin ...
    Copying coraenv to /usr/local/bin ...
    Creating /etc/oratab file...
    Entries will be added to the /etc/oratab file as needed by
    Database Configuration Assistant when a database is created
    Finished running generic part of root script.
    Now product-specific root actions will be performed.
    Using configuration parameter file: /oracle/11.2.0/grid/crs/install/crsconfig_params
    Creating trace directory
    LOCAL ADD MODE
    Creating OCR keys for user 'root', privgrp 'sys'..
    Operation successful.
    OLR initialization - successful
    root wallet
    root wallet cert
    root cert export
    peer wallet
    profile reader wallet
    pa wallet
    peer wallet keys
    pa wallet keys
    peer cert request
    pa cert request
    peer cert
    pa cert
    peer root cert TP
    profile reader root cert TP
    pa root cert TP
    peer pa cert TP
    pa peer cert TP
    profile reader pa cert TP
    profile reader peer cert TP
    peer user cert
    pa user cert
    Adding daemon to inittab
    CRS-2672: Attempting to start 'ora.mdnsd' on 'sph1erp'
    CRS-2676: Start of 'ora.mdnsd' on 'sph1erp' succeeded
    CRS-2672: Attempting to start 'ora.gpnpd' on 'sph1erp'
    CRS-2676: Start of 'ora.gpnpd' on 'sph1erp' succeeded
    CRS-2672: Attempting to start 'ora.cssdmonitor' on 'sph1erp'
    CRS-2672: Attempting to start 'ora.gipcd' on 'sph1erp'
    CRS-2676: Start of 'ora.gipcd' on 'sph1erp' succeeded
    CRS-2676: Start of 'ora.cssdmonitor' on 'sph1erp' succeeded
    CRS-2672: Attempting to start 'ora.cssd' on 'sph1erp'
    CRS-2672: Attempting to start 'ora.diskmon' on 'sph1erp'
    CRS-2676: Start of 'ora.diskmon' on 'sph1erp' succeeded
    CRS-2676: Start of 'ora.cssd' on 'sph1erp' succeeded
    ASM created and started successfully.
    Disk Group OCRVOTE created successfully.
    clscfg: -install mode specified
    Successfully accumulated necessary OCR keys.
    Creating OCR keys for user 'root', privgrp 'sys'..
    Operation successful.
    CRS-4256: Updating the profile
    Successful addition of voting disk ab847ed2b4f04f2dbfb875226d2bb194.
    Successful addition of voting disk 85c05a5b30384f8dbff48cc069de7a7c.
    Successful addition of voting disk 649196fbdd614f9cbf26a9a0e6670a6e.
    Successful addition of voting disk 8815dfcee2e64f64bf00b9c76626ab41.
    Successful addition of voting disk 8ce55fe5534f4f77bfa9f54187592707.
    Successfully replaced voting disk group with +OCRVOTE.
    CRS-4256: Updating the profile
    CRS-4266: Voting file(s) successfully replaced
    ## STATE File Universal Id File Name Disk group
    1. ONLINE ab847ed2b4f04f2dbfb875226d2bb194 (/dev/oracle/ocrvote1) [OCRVOTE]
    2. ONLINE 85c05a5b30384f8dbff48cc069de7a7c (/dev/oracle/ocrvote2) [OCRVOTE]
    3. ONLINE 649196fbdd614f9cbf26a9a0e6670a6e (/dev/oracle/ocrvote3) [OCRVOTE]
    4. ONLINE 8815dfcee2e64f64bf00b9c76626ab41 (/dev/oracle/ocrvote4) [OCRVOTE]
    5. ONLINE 8ce55fe5534f4f77bfa9f54187592707 (/dev/oracle/ocrvote5) [OCRVOTE]
    Located 5 voting disk(s).
    Start of resource "ora.cluster_interconnect.haip" failed
    CRS-2672: Attempting to start 'ora.cluster_interconnect.haip' on 'sph1erp'
    CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the following error:
    Start action for HAIP aborted
    CRS-2674: Start of 'ora.cluster_interconnect.haip' on 'sph1erp' failed
    CRS-2679: Attempting to clean 'ora.cluster_interconnect.haip' on 'sph1erp'
    CRS-2681: Clean of 'ora.cluster_interconnect.haip' on 'sph1erp' succeeded
    CRS-4000: Command Start failed, or completed with errors.
    Failed to start Oracle Clusterware stack
    Failed to start High Availability IP at /oracle/11.2.0/grid/crs/install/crsconfig_lib.pm line 1046.
    /oracle/11.2.0/grid/perl/bin/perl -I/oracle/11.2.0/grid/perl/lib -I/oracle/11.2.0/grid/crs/install /oracle/11.2.0/grid/crs/install/rootcrs.pl execution failed
    sph1erp:/oracle/11.2.0/grid #
    Last few lines from CRS Log for node 1, where error came
    [ctssd(6467)]CRS-2401:The Cluster Time Synchronization Service started on host sph1erp.
    2011-02-25 23:04:16.491
    [oracle/11.2.0/grid/bin/orarootagent.bin(6423)]CRS-5818:Aborted command 'start for resource: ora.cluster_interconnect.haip 1 1' for resource 'ora.cluster_int
    erconnect.haip'. Details at (:CRSAGF00113:) {0:0:178} in */oracle/11.2.0/grid/log/sph1erp/agent/ohasd/orarootagent_root/orarootagent_root.log.*
    2011-02-25 23:04:20.521
    [ohasd(5513)]CRS-2757:Command 'Start' timed out waiting for response from the resource 'ora.cluster_interconnect.haip'. Details at (:CRSPE00111:) {0:0:178} in
    */oracle/11.2.0/grid/log/sph1erp/ohasd/ohasd.log.*
    Few lines from */oracle/11.2.0/grid/log/sph1erp/agent/ohasd/orarootagent_root/orarootagent_root.log.*
    =====================================================================================================
    2011-02-25 23:04:16.823: [ USRTHRD][16] {0:0:178} Starting Probe for ip 169.254.74.54
    2011-02-25 23:04:16.823: [ USRTHRD][16] {0:0:178} Transitioning to Probe State
    2011-02-25 23:04:17.177: [ USRTHRD][15] {0:0:178} [NetHAMain] thread stopping
    2011-02-25 23:04:17.177: [ USRTHRD][15] {0:0:178} Thread:[NetHAMain]isRunning is reset to false here
    2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} Thread:[NetHAMain]stop }
    2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} thread cleaning up
    2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} pausing thread
    2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} posting thread
    2011-02-25 23:04:17.178: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop {
    2011-02-25 23:04:17.645: [ USRTHRD][16] {0:0:178} [NetHAWork] thread stopping
    2011-02-25 23:04:17.645: [ USRTHRD][16] {0:0:178} Thread:[NetHAWork]isRunning is reset to false here
    2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop }
    2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop {
    2011-02-25 23:04:17.645: [ USRTHRD][12] {0:0:178} Thread:[NetHAWork]stop }
    2011-02-25 23:04:17.891: [ora.cluster_interconnect.haip][12] {0:0:178} [start] Start of HAIP aborted
    2011-02-25 23:04:17.892: [   AGENT][12] {0:0:178} UserErrorException: Locale is
    2011-02-25 23:04:17.893: [ora.cluster_interconnect.haip][12] {0:0:178} [start] clsnUtils::error Exception type=2 string=
    CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the following error:
    Start action for HAIP aborted
    2011-02-25 23:04:17.893: [    AGFW][12] {0:0:178} sending status msg [CRS-5017: The resource action "ora.cluster_interconnect.haip start" encountered the foll
    owing error:
    Start action for HAIP aborted
    ] for start for resource: ora.cluster_interconnect.haip 1 1
    2011-02-25 23:04:17.893: [ora.cluster_interconnect.haip][12] {0:0:178} [start] clsn_agent::start }
    2011-02-25 23:04:17.894: [    AGFW][10] {0:0:178} Agent sending reply for: RESOURCE_START[ora.cluster_interconnect.haip 1 1] ID 4098:661
    2011-02-25 23:04:18.552: [ora.diskmon][12] {0:0:154} [check] DiskmonAgent::check {
    2011-02-25 23:04:18.552: [ora.diskmon][12] {0:0:154} [check] DiskmonAgent::check } - 0
    2011-02-25 23:04:19.573: [    AGFW][10] {0:0:154} Agent received the message: AGENT_HB[Engine] ID 12293:669
    2011-02-25 23:04:20.510: [ora.cluster_interconnect.haip][18] {0:0:178} [start] got lock
    2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] tryActionLock }
    2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] abort }
    2011-02-25 23:04:20.511: [ora.cluster_interconnect.haip][18] {0:0:178} [start] clsn_agent::abort }
    2011-02-25 23:04:20.511: [    AGFW][18] {0:0:178} Command: start for resource: ora.cluster_interconnect.haip 1 1 completed with status: TIMEDOUT
    2011-02-25 23:04:20.512: [ora.cluster_interconnect.haip][8] {0:0:178} [check] NetworkAgent::init enter {
    2011-02-25 23:04:20.513: [ora.cluster_interconnect.haip][8] {0:0:178} [check] NetworkAgent::init exit }
    2011-02-25 23:04:20.517: [    AGFW][10] {0:0:178} Agent sending reply for: RESOURCE_START[ora.cluster_interconnect.haip 1 1] ID 4098:661
    2011-02-25 23:04:20.519: [ USRTHRD][8] {0:0:178} Ocr Context init default level 23886304
    2011-02-25 23:04:20.519: [ default][8]clsvactversion:4: Retrieving Active Version from local storage.
    [   CLWAL][8]clsw_Initialize: OLR initlevel [70000]
    Few lines from */oracle/11.2.0/grid/log/sph1erp/ohasd/ohasd.log.*
    =====================================================================================================
    2011-02-25 23:04:21.627: [UiServer][30] {0:0:180} Done for ctx=6000000002604ce0
    2011-02-25 23:04:21.642: [UiServer][31] Closed: remote end failed/disc.
    2011-02-25 23:04:26.139: [ CLSINET][33]Returning NETDATA: 1 interfaces
    2011-02-25 23:04:26.139: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
    erconnect'
    2011-02-25 23:04:26.973: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
    2011-02-25 23:04:26.973: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
    DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
    2011-02-25 23:04:26.992: [UiServer][30] {0:0:181} processMessage called
    2011-02-25 23:04:26.993: [UiServer][30] {0:0:181} Sending message to PE. ctx= 6000000001b440f0
    2011-02-25 23:04:26.993: [UiServer][30] {0:0:181} Sending command to PE: 67
    2011-02-25 23:04:26.994: [   CRSPE][29] {0:0:181} Processing PE command id=173. Description: [Stat Resource : 600000000135f760]
    2011-02-25 23:04:26.997: [UiServer][30] {0:0:181} Done for ctx=6000000001b440f0
    2011-02-25 23:04:27.012: [UiServer][31] Closed: remote end failed/disc.
    2011-02-25 23:04:31.135: [ CLSINET][33]Returning NETDATA: 1 interfaces
    2011-02-25 23:04:31.135: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
    erconnect'
    2011-02-25 23:04:32.318: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
    2011-02-25 23:04:32.318: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
    DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
    2011-02-25 23:04:32.332: [UiServer][30] {0:0:182} processMessage called
    2011-02-25 23:04:32.333: [UiServer][30] {0:0:182} Sending message to PE. ctx= 6000000001b45ef0
    2011-02-25 23:04:32.333: [UiServer][30] {0:0:182} Sending command to PE: 68
    2011-02-25 23:04:32.334: [   CRSPE][29] {0:0:182} Processing PE command id=174. Description: [Stat Resource : 600000000135f760]
    2011-02-25 23:04:32.338: [UiServer][30] {0:0:182} Done for ctx=6000000001b45ef0
    2011-02-25 23:04:32.352: [UiServer][31] Closed: remote end failed/disc.
    2011-02-25 23:04:36.155: [ CLSINET][33]Returning NETDATA: 1 interfaces
    2011-02-25 23:04:36.155: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
    erconnect'
    2011-02-25 23:04:37.683: [UiServer][31] CS(60000000014b0790)set Properties ( root,60000000012e0260)
    2011-02-25 23:04:37.683: [UiServer][31] SS(6000000001372270)Accepted client connection: saddr =(ADDRESS=(PROTOCOL=ipc)(DEV=92)(KEY=OHASD_UI_SOCKET))daddr = (A
    DDRESS=(PROTOCOL=ipc)(KEY=OHASD_UI_SOCKET))
    2011-02-25 23:04:37.702: [UiServer][30] {0:0:183} processMessage called
    2011-02-25 23:04:37.703: [UiServer][30] {0:0:183} Sending message to PE. ctx= 6000000002604ce0
    2011-02-25 23:04:37.703: [UiServer][30] {0:0:183} Sending command to PE: 69
    2011-02-25 23:04:37.704: [   CRSPE][29] {0:0:183} Processing PE command id=175. Description: [Stat Resource : 600000000135f760]
    2011-02-25 23:04:37.708: [UiServer][30] {0:0:183} Done for ctx=6000000002604ce0
    2011-02-25 23:04:37.722: [UiServer][31] Closed: remote end failed/disc.
    2011-02-25 23:04:41.156: [ CLSINET][33]Returning NETDATA: 1 interfaces
    2011-02-25 23:04:41.156: [ CLSINET][33]# 0 Interface 'lan2',ip='10.10.16.50',mac='3c-4a-92-48-71-be',mask='255.255.255.240',net='10.10.16.48',use='cluster_int
    erconnect'
    What could be the issue ????
    Experts Please help me. Doing setup for the PRoduction Env...
    Do response ASAP...... Thanks
    Regards,
    Manish

  • Pre requisits for Internation HR and Payroll Setups

    Hi All,
    Can any one help me in Pre requisits for Internation HR and Payroll Setups.
    Thanks in advance.

    Here's some stuff to get you started:
    International HR and Payroll (Doc ID 261452.1)
    Running International HR and Payroll Setup (Doc ID 278006.1)
    HOW TO ENABLE ENHANCED RETROPAY FOR INTERNATIONAL HRMS PAYROLL SETUP (Doc ID 458535.1)
    If you have specific problems, please give full details of what they are and error messages (etc) and I'm sure someone can help further.

  • Pre requisites and steps for BI content installation.

    Hi ,
    We need to install Complete BI content in our production system , I am aware of the steps to be exeuted in SPRO but wanted to know the complete procedure step by step .
    1) what are the pre requisites and checks before and after doing activation in SPRO .
    2) If we already have some BI content installed and now we do complete reinstallation, will that create any issue .
    3)Can we do activation directly in Production ?
    Thanks,
    Neetika.

    Hello Neethika, for your second question
    2) If we already have some BI content installed and now we do complete reinstallation, will that create any issue
    If the object which you are going to install is already active and if it is customised, and if you go for reinstallation, new standard object will reinstall the already customised existing oblect. However, if you select the check box MATCH (X) or COPY and do the installation, object will be activated with retainging customisation. so there will be no need to customise it again.
    It is always recommended to go for manual collection of objects rather then automatic collection, because there might be wierd chances that all the objects might not get activated and this will cause a problem while you move the same from DEV to PRODUCTION.
    feel free write if any further clarication need
    Thanks

  • Pre Requisites to export dashboard into PDF format

    Dear Xcelsiuis Experts,
    Am unable to export the dashboard either into PDF format. Please let me know are there any pre requisites to export the same into PDF format.
    Regards
    Narendra Reddy

    Hi,
    Do you have Adobe Acrobat on your system ? i have version 6.0 Installed on my System and i can Export it and it is working fine in pdf format. I have tried with Word, PowerPoint and other available format too all are working fine here.
    You can do this by Following Steps Bellow
    1.
    --> Open DashBoard you want to Export into PDF or any other Format like Flash (SWF), HTML, PowerPoint or Word.
    --> Go to Menu --> File --> Export --> from here you can select the Format you want.
    2.
    --> You can also select these option from Toolbar if you don't have at the Screen Please Follow steps.
    --> Go to Menu --> View --> Toolbar --> and Select "Export"
    --> it will show you up the Toolbar from here you can also Export.
    Hope will solve out your problem,
    Kind Regards,
    Faisal

  • Pre-requisites for running report for P45 RPCP45GN

    Hi,
    We would like to know that are there pre-requisites steps that are now required to run RPCP45GN program and if so what are they?
    Regards
    Nimmi

    Hi,
    The following are Pre-requisites for RPCP45GN in new year legal changes:
    1> The starter report RPUEFO_STARTER should be run before running the    leaver report RPCP45GN.
    2> Last payroll should be run for that perner.
    3> The actions must performed e.g. leaver, payroll area changed, etc.
    4> Infotype 65 should be correct maintained.
    5> Address infotype 6 should be maintained for the perner.
    Hope this could solve your problem.
    Regards
    Roop

  • AutoCreate Final Assembly Orders - Pre-requisite setup details needed

    Hi ,
    I am a technical person and bit new to  WIP module but to my understanding when AutoCreate Final Assembly Orders program runs, it creates a WO and also Requisition.
    I was doing few test and found that for some sales order it is creating WO but not requisition i.e. I don't see Requisition Import being called by AutoCreate Final Assembly Orders program.
    Can you please provide me what is the setup or pre-requisite for the AutoCreate Final Assembly Orders program to generate Requisition?
    Thanks,
    SM

    [email protected] wrote:
    [SOLVED]
    There seems to be an issue with partitioning a swap partition as "swap" (wtf?) when using dm-crypt/Swap encryption.  This is odd to me since reportedly systemd processes crypttab before fstab, but maybe it looks at the drives first before looking at either table file and then assumes all swaps are not encrypted and just mounts the standard unencrypted swap essentially reserving the partition so that dm-crypt can't access it - would be nice if systemd didn't do that, maybe not logically possible?  Or, time for a new partition type, encrypted-swap?  Anyway, I digress and notice that now my encrypted swap works as expected but still shows a partition type of "unknown"which feels like a hack.
    So the solution:
    sudo cryptsetup luksDump /dev/sdaX
    Then follow the steps from the "dm-crypt/Swap encryption" wiki.  Aside from long term solutions maybe this could be added to that wiki article?
    thanks!
    b1k
    Had more time to play with this.  The "cryptsetup" command isn't necissary.  While this effectively "fixed" my swap partition that was partitioned as a "swap" partition - all that one needs to do is partition their swap as anything BUT swap.  So maybe a quick blurb mentioning that in the "dm-crypt/Swap encryption" wiki article will save another noob a couple hours.  It is sorta mentioned in the "Swap (Activation by systemd)" wiki article but it's hard to understand what the author was trying to convey (after re-reading I'm still not sure what problem the author is solving exactly).

  • FI  Substitutions with Pre requisites

    Hi Experts,
    I want to mention as a pre requisite that my substitution exit should work for a given Range of company Codes (Bseg-Bukrs)
    Do i need to create a set directory or what are the steps involved?
    Please tell me.
    Thanks
    Dany

    You can create FI substitutions using the transaction GGB1.
    In this transaction - You will find a tree control where you will implement the substitution rules. Once you have identified the area ( say for example I need to do a substitution at Item level of Cost Accounting) the you create your substitution rules under it,.
    When you are creating a Substitution rule - It will show you the list of Data/Structures available to you and
    1. Prerequisite Conditions - Here you specify the filetr conditions for the logic - Say you want this rule to be appliacle for Company Code = CC01 only.
    2. Substitution Rule - It can be a directly value change, or a piece of code.
    Hope it helps.
    revert back in case of problems.

  • Failing PATH pre-requisite check installing 11g client

    Greetings -
    I'm trying to install the 32bit oracle 11g database client on Win 7 Professional x64. I'm stuck with this error when the installer gets to the "Perform Prerequisite Checks" step:
    Environment variable: "PATH" - This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
    Details:
    -      PRVF-3919 : Failed to retrieve value of environment variable "PATH"
    - Cause: Environment variable value could not be determined.
    - Action: Check user equivalence and whether the user has administrative privileges on the node.
    Google tells me this might be related to an excessive PATH environment variable length, so I made multiple repetitions of "clean some crap out and try to install again" with no effect. Currently it is set to:
    C:\>path
    PATH=C:\Windows\system32;C:\Windows;
    And the installer still fails.
    I've tried explicitly running the installer via "Run as Administrator" and as a regular user (who is in the Administrators group). No change either way.
    Someone on my team suggested making sure the installation target path has no spaces in it. I'm keeping the default path suggested by the installer, which is
    D:\app\ladams\product\11.2.0\client_1
    where ladams is my Windows user name. I did some experimentation here, changing the install path to things like "D:\oracle" and that hasn't resolved the issue.
    Interestingly, if I open the installer log, I can find this line in it near the top:
    INFO: PATH has :==>C:\Users\ladams\AppData\Local\Temp\OraInstall2013-01-28_02-19-03PM\jdk\jre\bin;C:\Windows\system32;C:\Windows;C:\Windows\system32;C:\Windows;;;.
    So it can apparently read the path at some point before the pre-requisite check, although it seems to be doubling up the contents for some reason...
    Later on in the log file, I see this:
    INFO: -----------------------------------------------
    INFO: *********************************************
    INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
    INFO: Severity:CRITICAL
    INFO: OverallStatus:OPERATION_FAILED
    INFO: -----------------------------------------------
    Is there some way to work around this issue, or just skip the prerequisites check entirely? I found something on a blog via google about being able to pass a "-ignoreSysPrereqs" switch to the installer to bypass the check. When I tried that, the installer still performed it's checks, and failed with the same error, so apparently that was bad info...
    Any help would be appreciated.

    Thanks for the reply.
    I did indeed take a look at the client installation instructions here: http://docs.oracle.com/cd/E11882_01/install.112/e24282/toc.htm#BABGCIFF
    However, it appears to be out of date, or at least not applicable to my problem. Step 10 refers to an Ignore All button:
    "Note: Oracle recommends that you use caution in checking the Ignore All option. If you check this option, then Oracle Universal Installer may not confirm that your system is able to install Oracle Database successfully."
    I don't have an ignore all button. At least if there is, it's cleverly disguised. The only option I have after the check fails is "Cancel."
    Is there another section of the fine manual I should take a look at?
    Edited by: 984635 on Jan 28, 2013 6:09 PM
    Edited by: 984635 on Jan 28, 2013 6:17 PM

  • Win2000: Installer quits during "Executing pre-requisites..."

    Hello all. I tried to install Oracle 8.1.7 on Windows 2000
    Advanced Server (w/SP2) and every time the installer just quits--
    no error message, nothing, the window just disappears--after
    choosing the type (Typical, Minimum, Custom), about 30% through
    the status bar when it says "Executing Pre-requisites...".
    Since didn't have much luck with that, I went ahead and
    installed Oracle on a Linux machine. Now I get the same problem
    when I just try to install the Client on Windows 2000. After
    choosing the type of client (Admin, Programmer, etc) it starts a
    status bar, and the installer just disappears after it gets
    to "Executing Pre-requisites..."
    Anyone have any idea what's going on here? This has actually
    occurred on two different Win2000 machines here. The only common
    factor I could see was that both of them had been upgraded to
    Internet Explorer 6. So I installed an old 4.7 versino of
    Netscape and tried again but had the same problem.
    Thanks a lot.
    --Dan

    Hello All,
    I got the same problem when installed Oracle8i with Intel
    Pentium 4...So I thought that Oracle8i did not support Intel P4
    at all...In fact, they did not support P4 in this time....If
    anyone figures it out..please share big references...
    Regards,
    -- Jerry --

  • Sharepoint 2013 - Error installing pre-requisite on Windows Server 2012 R2

    I have been trying to get my Sharepoint 2013 installed on windows server 2012 R2. I was never able to get past the pre-requisite installer. It keeps failing at "Configuring Application Server Role, Web Server (IIS) Role" and was never able to get
    past that.
    In the last 3 days i tried almost all of the suggestions posted in various forums but was never able to get it work. Any insight in to this error and resolution is greatly appreciated.
    Tried all things explained here but didn't work
    KrisS

    I voted for the SharePoint 2013 isn't supported yet link. I spent 4 hours resolving the issue. In my installation, there were many claims by the installer that the application server role is corrupt or unavailable. I dove deep into the installer files and
    found 1 file that was not in the correct place. I am not going to mention it, because it is the reason the installer should fail.
    Downloading and installing sharepoint 2013 sp1 was the answer. Why? Because Windows Server 2012 R2 was my operating system. Windows Server 2012 R2 was not a supported type of installation for SharePoint 2013 until SharePoint 2013 SP1 was released.
    I hope this helps those whom have ben in dire need. Even though Paul was initially correct in his statement, the release of SharePoint 2013 sp1 opens doors.
    @Microsoft, as a former PFE I think you could have done better.

  • Swap Space error in pre requisite check of NWDS2004(Support Pack18)install

    Hi,
    Trying to install NWDI SP 18 (SAP Netweaver Developer Workplace ) trial version on my machine with Windows XP.
    The installation (after installing J2EE Engine + MaxDB + NWDS 2004 etc), it has thrown some error regarding page size.
    So when we check the pre requisites for the installation of the software, it is giving the below error that the swap size needs to be increased.
    ==============================================
    Condition:- Swap Size
    Result Code:- Condition not met
    Severity:- HIGH
    Message:- For the selected services atleast 7135 MB swap space recommeneded.Current value 3921 MB(updated 2005-06-24)
    =============================================
    Please anybody let me know if there is a way to increase the swap size and fix the issue at the earliest.

    Hi Gandhi,
    Right click my on computer ->Select Properties -> Click Advanced Tab ->Click Settings (performance) -> Select Advanced Tab -> In virtual memory -> Change ; You canIncrease swap space/page file here.
    regards
    Juan
    Please reward with points if helpful

  • What are the System pre-requisite for the BODS installation(SAP Data services)

    I am trying to install SAP Data services, please help me to get system pre-requisite. checked in PAM but i couldnot get it.

    Hi Siddhu,
    Please refer to the below SCN Link which will give you all the details and pre-requisites before instalalling DS 4.x
    Tutorial: How to install SAP Data Services 4.2 - Part 1
    Regards
    Arun Sasi

  • Pre-requisites and steps for uploading chart of accounts in sap r/3

    Hi,
    I am a fresher in SAP FI. I have a completly new set of Chart of Accounts which i need to upload in the system. How do i do it and are there any pre-requisites for the same i.e variants to be defined and assigned completly before uploading the Chart of Accounts.
    I have heard of LSMW , but then how do i use it can anybody help me on the same.
    Thanks
    Poornima

    Hi,
    Yes, you need to define first the chart of account name and it should be assigned to the company code in OBY6.
    Please refer below thread:-
    [Upload Chart Of Accounts - Indian Localisation;
    Regards,
    Gaurav

Maybe you are looking for

  • ITunes does not see my Remote app...

    Hello everyone! I'm trying to set up home sharing, and I feel like this is rocket science. It's been 2 hours and I still can't get it to work. I have the latest version of iTunes, the latest version of Remote app. I am using Windows 7, and my iOS is

  • Re: Payment_method_lookup_code in supplier conversion using api

    Hi,      We have a requirement where we need to update payment_method_lookup_code and Pay_group_lookup_code in ap_supplier_sites_all table (for the provided vendor details like vendor name,vendor site code and account number). Can you please explain

  • Vertical alignment is middle regardless of setting

    Running LiveCycle Designer ES 8.2 and Adobe Acrobat Pro 9 on Windows 7. I'm designing a form with many text fields.  Most of them work great.  However, I several text fields--some standalone, some table cells--where the vertical alignment of the user

  • How to use Script Editor to open iTunes visualizer?

    I have an AppleScript which I used to use in previous versions of OS X to open a visualizer and put it into full screen if music was currently playing. If no music was playing, then it would turn off the visualizer and take iTunes out of full screen.

  • AS 3 with old SWF files

    My website has several SWF files running with AS2. I am now considering switching my new files to AS3. My main swf as2 file loads other as2 swf files using load() and places them at different levels. Can this main file load as3 swf files? If I change