Rac setup using vmware

Is there anyway I can simulate a rac environment in my pc . Is it possible using Vmware or any other means ?

My host OS is Windows-7. This docs. says your Host should be Centos OS and in which you will install VMware and Client tools also. In this way u can clone another Rac2 machine.
But I have Oracle VM Vistual Box installed on Windows-7. Another is VMware Player installed on Windows-7.
I want to install Oracle-10g RAC on my Laptop. Please any suggestions or Docs. related to this.
Shakeel

Similar Messages

RAC setup on VMware Workstation is possible?

Hi,
Is it possible to create a RAC setup on VMware workstation(VMware-workstation-6.5.1-126130) or VMware server is mandatory for such a setup.
My planned RAC setup will as show below.
OS:Enterprise-R5-U2-Server-i386
Oracle clusterware:10201_clusterware_linux32
Oracle Database:10201_database_linux32
I am planning to store OCR and Voting disks on shared RAW devices and database files on ASM.
Thank You and Regards...

Yes its possible to install it over workstation. There is as such o difference in both the products except that server is free but workstation is paid. Otherwise, both are virual machine softwares.
HTH
Aman....

RAC cloning using VMWare

hello,
Just curious if anyone has looked into cloning their RAC enviornment running on VMWare?
so create a vmware RAC template and then use it to create other RAC enviornments.
What would be some of the issues involved given the multiple layers?
Thank You.

First, I would never EVER use VMware for a RAC environment. RAC = High Availability. Splitting a single host into multiple "little" systems, then using RAC is IMProfessionO down right idiotic. Because as soon as the "host" system crashes, you no longer have HA. The only thing that I would "maybe" consider it for a test or even dev environment but never for production.
That being said, have you looked at the documentation?
http://www.oracle.com/technetwork/products/clustering/oracle-rac-in-oracle-vm-environment-131948.pdf

RAC setup on VMWARE..

Dear All,
I m setting RAC on VMWARE (RHEL4), while installing always get some errors that may of stack 10, or /dev/raw/raw1 is inaccessable etc all are related to raw devices only. I can ping to all the ips given permissions according to document, but while running root.sh in crs it gives errors which are related to rawdevices only?
How to crosscheck the rawdevices for having any issues or properly configured?

what error you are getting???
paste error.
which document you are using??

How to connect to Oracel 10g on RAC setup using JDBC type 4 driver

Hi ,
I am using websphere 5.1.1.0 server as my application server .Can some one please enlighten me on how can I configure my data source for 10g on RAC ( not stand alone ) . Rather I would like how different is it from configuring data source for a standalone database .

Hi,
Maybe this example cut will work for you. It passes and gets
string:
Statement stmt = conn.createStatement ();
CallableStatement cs = conn.prepareCall ("begin ? :=
MyFunction(?); end;");
cs.registerOutParameter(1,Types.CHAR);
cs.executeUpdate();
System.out.println (cs.getString(1).trim());
Robertas
Sudhir Kulkarni (guest) wrote:
: How to call Stored Functions from Oracle.. Does JDBC allow
this
: to do..
: Callable Statement allows only Stored Procedures.
: Does It allow to invoke Database Functions..
: Pl. Explain is there any other way to invoke Database
Functions..
: Thanks in Advance,
: Sudhir Kulkarni
null

Install RAC using vmware

Hi,
I am trying to install RAC 10g using vmware . I have windows vista 64bit as host OS. Now the problem i am facing during installation of vmware . if i try to install vmware server it's not being installed on vista as its not been supported by vista 64bit OS. if i try to install vmware workstation 6.5 it install fine but again it doesn't support clustering hence can't proceed with installation. Does some has installed RAC on same kind of configuration . Please share with me. Would be a great help.
Edited by: user7245803 on Jul 2, 2009 10:12 AM

You MUST NOT use VMware Server to try install RAC!
You CAN DO it with VMware Workstation 6.5!
When use VMware Workstation 6.5 you get the message:
Clustering is not support for VMWare Workstation
This can ignored!
Important: When creating shared disks, the disk must be of type 4(preallocated ESX-type virtual disk)
Step by step: How to create shared disks with VMWare Worksation 6.5
[for Linux RAC|http://d-h-n.de/blog/?p=430]
[for Windows RAC|http://d-h-n.de/blog/?p=38]
(My Env: Windows XP sp.2, VMWare Workstation 6.5 beta)

Document on 10g RAC setup on solaris using vmware

Hi All,
I am planning to setup "Oracle 10g RAC setup on Solaris using vmware", but I am strucked up at installation of Soaris 10 in VMWare.
Can any body please help/provide me the document on Solaris 10 installation for RAC setup .
The main problems I am having during the SOlaris 10 setup is
1) Setting up the static public and private addresses required for RAC
2) Partitioning the disk space.
Thanks in advance,
Mahipal Reddy

Refer these,
http://www.scribd.com/doc/15650880/Install-Rac-on-Solaris-Vmware
http://www.disperu.com/using-vmware-server-install-10g-rac-on-solaris/
http://nayyares.blogspot.com/2008/11/step-by-step-rac-10g-r2-solaris-10.html
Thanks
Edited by: Cj on Dec 13, 2010 2:38 AM

How to install oracle RAC 11g on oracle linux 5 using vmware workstation ?

Hello;
I need to Install Oracle RAC 11g R2 with database 11g ( 2 nodes ) but by using vmware workstation ( not server 2) on oracle linux 5-6 .
So any document can help me please ..
regards.

http://www.oracle-base.com/articles/11g/oracle-db-11gr2-rac-installation-on-ol5-using-vmware-server-2.php
http://appsdbaworkshop.blogspot.in/2011/10/11gr2-rac-on-linux-56-using-vmware.html
http://robertgfreeman.blogspot.in/2009/12/11gr2-rac-on-vmware-part-one.html

Oracle RAC 10g on Solaris x86 using vmware

Guys,
I am practising 10g RAC installation on my laptop, wherein I have vmware workstation and
solaris-x86 version 10 installed on it.
I am trying to install Oracle 10g clusterware.
I have followed the steps for clusterware installation.
I am facing an errror on one of the node while running root.sh.
On the first node, the root.sh runs fine.
The following is the log.
bash-3.00# ./root.sh
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: xsan001 xsan001-priv xsan001
node 2: xsan002 xsan002-priv xsan002
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /dev/rdsk/c0d0s4
Format of 1 voting devices complete.
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
CSS is active on these nodes.
xsan001
CSS is inactive on these nodes.
xsan002
Local node checking complete.
Run root.sh on remaining nodes to start CRS daemons.
=============================
On the second node, the root.sh gives error.
bash-3.00# ./root.sh
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: xsan001 xsan001-priv xsan001
node 2: xsan002 xsan002-priv xsan002
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /dev/rdsk/c0d0s4
Format of 1 voting devices complete.
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Failure at final check of Oracle CRS stack.
10
Can you provide some sort of clue what could be done to resolve the above error?

Refer to http://www.oracleracsig.org/ Under documents section select OS=Solaris. You will find a document on Oracle RAC on Solaris10 using Vmware.

Putting Oracle Apps 11i on 10g RAC using VMware

Hello All,
I am building a Oracle Applications 11i on 10g RAC, using VMware..Since there aren't any docs I could find on internet explaining how to do this, I have come up with my own. I have combined the MEtalink doc:362135.1 and the docs describing building a 10gRAC "database" using VMware..I want to know if the below process is good enough to get the required results:
Steps:
-Install VMware on HOST m/c
-Configure 1st virtual m/c, say RAC1
-Install RHEL on RAC1
-Install 11i with 9i database on the local SCSI bus- SCSI 0:0
-Install VMware client tools
-Create a new ethernet adapter(for private interconnect) on RAC1
-Create shared disks on RAC1
-Partition the disks
-Add the disks as RAW devices in /etc/rawdevices
-Clone RAC1 to a new virtual m/c,say RAC2
-Delete the 11i apps directories from its local SCSI bus..since these would be redundant on RAC2
-Install Clusterware s/w on RAC1 using the same oraInventory that is used by the Applications 11i installation-
-Install the 10g DB software and create ASM instances using dbca
-Install Database componenets from 10g companion CD
-Upgrade CRS abd DB s/w to 10.2.0.4
-Upgrade the 9i database to 10g using dbua from the 10g ORACLE_HOME
-Convert the newly upgraded 10g databse to RAC using the rconfig tool
-Post migration steps for RAC
-Enable AutoConfig on the Applications Database tier
- Follow the "Establish Applications Environment for RAC" section from Doc:362135.1
-Configure PArallel Concurrent Processing(PCP)
Thanks,
Sandeep

(Considering that there are only 2 nodes the scenario the steps would be as follows:
1. Install RAC using the steps provided at the link:
http://oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnCentos4UsingVMware.php
2.On RAC1 create a single instance of Oracle 11i (Both DB and Apps are on the same node)
3. Follow the steps outlined in the Note:362135.1
One thing to note is that the steps are the same whether the nodes are real or virtual.

How to identify Which ports are using in RAC setup?

Hi,
how to identify Which ports are using in RAC setup?
Thnaks,

[Viewing Port Numbers and Access URLS|http://download.oracle.com/docs/cd/B19306_01/install.102/b14205/ports.htm#sthref1208]

Installing Oracle 10g rac on linux 4 using vmware :problem

Hi Expert ,
I'm facing problem on installing oracle 10g rac on centos 4x using vmware, installation is showing errors . The command failed are oifcfg, cluvfy
on running ./cluvfy stage -post crsinst -n rac1,rac2
error:
OCR integrity found invalid for rac1
OCR integrity found invalid for rac2
Please advice...
regards,
Shaan

hi Experts,
orccheck failed for one of the node, can you please suggest what needs to be done now..
filename :/dev/raw/raw1
error "device/file integrity check failed"
error "device not configured"
Regards
Message was edited by:
Shaan_dmp

Problem of using OCFS2 as shared storage to install RAC 10g on VMware

Hi, all
I am installing a RAC 10g cluster with two linux nodes on VMware. I created a shared 5G disk for the two nodes as shared storage partition. By using OCFS2 tools, i formatted this shared storage partition and successfully auto mounted it on both nodes.
Before installing, i use the command "runcluvfy.sh stage -pre crsinst -n node1,node2" to determine the installation prerequisites. Everything is ok except an error "Could not find a suitable set of interfaces for VIPs.". By searching the web, i found this error could be safely ignored.
The OCFS2 works well on both nodes, i formatted the shared partition as ocfs2 file system and configure o2bc to auto start ocfs service. I mounted the shared disk on both nodes at /ocfs directory. By adding an entry into both nodes' /etc/fstab, this partition can be auto mounted at system boots. I could access files in shared partition on both nodes.
My problem is that, when installing clusterware, at the stage "Specify Oracle Cluster Registry", I enter "/ocfs/OCRFILE" for Specify OCR Location and "/ocfs/OCRFILE_Mirror" for Specify OCR Mirror Location. But got an error as following:
----- Error Message ----
The location /ocfs/OCRFILE, entered for the Oracle Cluster Registry(OCR) is not shared across all the nodes in the cluster. Specify a shared raw partition or cluster file system that is visible by the same name on all nodes of the cluster.
------ Error Message ---
I don't know why the OUI can't recognize /ocfs as shared partition. On both nodes, using command "mounted.ocfs2 -f", i can get the result:
Device FS Nodes
/dev/sdb1 ocfs2 node1, node2
What's the possible wrong? Any help is appreciated!
Addition information:
1) uname -r
2.6.9-42.0.0.0.1.EL
2) Permission of shared partition
$ls -ld /ocfs/
drwxrwxr-x 6 oracle dba 4096 Aug 3 18:22 /ocfs/

Hello
I am not sure how far this following solution is relevant to your problem (regardless when it was originally posted - may help someone who is reading this thread), here is what I faced and here is how I fixed it:
I was setting up RAC using VMWare. I prepared rac1 [installed OS, configured disks, users, etc] and the made a copy of it as rac2. So far so good. When, as per the guide I was following for RAC configuration, I started OCFS2 configuration, faced the following error on RAC2 when I tried to mount the /dev/adb1:
===================================================
[Root @ *rac2* ~] # mount - t ocfs2 - o datavolume, nointr / dev / sdb1 / ocfs
ocfs2_hb_ctl: OCFS2 DIRECTORY corrupted WHILE reading uuid ocfs2_hb_ctl: OCFS2 DIRECTORY corrupted WHILE reading uuid
mount.ocfs2: Error WHEN attempting TO run / sbin / ocfs2_hb_ctl: "Operation not permitted" mount.ocfs2: Error WHEN attempting TO run / sbin / ocfs2_hb_ctl: "Operation not permitted"
===================================================
After a lot of "googling around", I finally bumped into a page, the kind person who posted the solution said [in my words below and more detailed ]:
o shutdown both rac1 and rac2
o in VMWare, "edit virtual machine settings" for rac1
o remove the disk [make sure you drop the correct one]
o recreate it and select *"allocate all disk space now"* [with same name and in the same directory where it was before]
o start rac1 and login as *"root"* and *"fdisk /dev/sdb"* [or whichever is/was your disk where you r installing ocfs2]
Once done, repeat the steps for configuring OCFS2. I was successfully able to mount the disk on both machines.
All this problem was apparently caused by not choosing "allocate all disk space now" option while creating the disk to be used for OCFS2.
If you still have any questions or problem, email me at [email protected] and I'll try to get back to you at my earliest.
Good luck!
Muhammad Amer
[email protected]

Install RAC OBS on single node using VMWare

Re: How to install Muti_node R12 using VMWARE
Mine is a little different.
I have the Test server which has OEL5 and one OAS 10g(Oracle application Server) with 10g database.
I want to install RAC OBS on this server by installing VMWare for the single node. I do not want to wipe out the OAS, reinstore OSL5 and start from a blank machine.
Can I keep what I have on the server and install RAC OBS by installing VMWare, configuring the virtual sharing disks, and install RAC OBS using ASM?

Hi,
Can I keep what I have on the server and install RAC OBS by installing VMWare, configuring the virtual sharing disks, and install RAC OBS using ASM?Yes, you can. Just make sure you have sufficient resources on this machine.
Note: 388577.1 - Using Oracle 10g Release 2 Real Application Clusters and Automatic Storage Management with Oracle E-Business Suite Release 12
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=388577.1
Regards,
Hussein

N/W Setup during RAC Config on VMWARE Workstation 7

Hi Guru's,
I am new to RAC, while i am trying to configure RAC using below mentioned post i am able to do that but the pt where i stuck is to configure the n/w
I am currently using VMWARE Workstation and OS is Centos 06.
http://gurpartapblog.blogspot.in/2010/06/install-oracle-rac-11gr2-on-vmware-with.html
http://www.oracle-base.com/articles/10g/oracle-db-10gr2-rac-installation-on-centos-4-using-vmware.php
Thanks for your help in advance

Hi,
I am not sure "shared disks" works with every VMWare Workstation version.
Also CentOS is not a supported OS for Oracle RAC.
I personally would advice taking Oracle Linux (which is also free) and use Virtual Box, because I know shared disks works in there flawlessly:
http://www.oracle-base.com/articles/11g/oracle-db-11gr2-rac-installation-on-oel5-using-virtualbox.php
However if you do have an exact question, on what is unclear, maybe other can help you further.
Regards
Sebastian

Rac setup using vmware

Similar Messages

Maybe you are looking for