Rac, statspack.snap and new job architecture
Hi %,
I want to install perfstat on a new rac database (10.2). In our old 9.2 database I used the job queue to run the snapshots on every instance seperately. Now I want to use the new scheduler to ran statspack.snap, but how do I tell the scheduler to run snap on on instance?
best regards
Andreas
I think I need a seperate job on every instance. Aren't the v$ views instance dependant? But perhaps I'm missing some fact about how statspack works. I always thougt, that statspack.snap samples the data of one instance.
(And statspack is just an example. Think about a report job which has to run on one defined instance, because someone wants to load balance manually - or an import job, which needs access to some special hardware, etc.)
regards
Andreas
Similar Messages
-
Questions on installtion and ram please help! Pc tech with new Job!
Im a Pc tech with a new job Im am in charg with a new Mac network . So Im great at PC.s just fuzzy on Macs.
Here is my problem.
IMac 17" flat panel.
New Hard drive , new cable (IDE), Tryed to install New OS ( just OS X) got throught the first 5 mins in the installer , the it stoped and told me that it had encountered an error and to restart.
Now I get an error 139 installer has unexspetanly stopped.
Press return to reboot.
Now pressing return never works have to hold start button to reboot.
Ran hardware test of cd Im gettting a a mem_/2/4 error.
I assusm that is a bad stick of memory? There is only 1 stick in there.
I belive that its using pc133 256meg for memory.
I have put a few pc133 sticks in the mac but none will work eather get a bad memory beep or no display .
Does it have to mac memory or special latency ?
Have opened the firmware and reset -all -nvram and defaults
Have remove Air Port card and all other stuff , onlly keyboard and mouse and power cord .
Does that sound right? If you need more info let me know.
Any other clues?
Any book that an tech like me (6 years fixing pcs) should read for macs? thanks for all your help in advance.
James
G5 Mac OS X (10.2.x)Another thing to consider, a free to use download (donationware) is
MacTracker; a small data base of Apple and Macintosh product specs.
If you don't already have it, see: http://www.mactracker.ca to download.
Some online manual sites had unauthorized copies of protected works
and those sites were pulled from the internet; but they had service
manuals in pdf for many models of computers. You may be able to get
the official versions of pdf manuals through a subscription service for
an annual fee; this may require searching and asking questions. It may
also require an IT budget you may not have, to get a Mac-only archive.
At one point I was given some technical support information to trouble-
shoot my own ailing under warranty Apple computer(s) and the information
is very helpful, when you have a need for the details they contain.
I was careful to use them for non-invasive troubleshooting only.
One older online source appears to have ftp:// links, but I was never
able to make them work. The site may not have valid content or could
be somehow blocked; so if you find such a site by searching for older
Apple Manuals online, it may not yield anything. Or it may be illegal.
Some of the low-end RAM chips can be problematic; I found at least
one to add major issues in my iMacG4 and made it hard to diagnose
another major hardware problem. Tossing the cheaper RAM (at retail
was higher cost than decent RAM) was the best thing; got a better one.
There should be a little information on boot ROM (firmware) per model in
the MacTracker database you can use offline. You may need to know more
about the use of Open Firmware in Macs. Hope this helps some.
PS: for a time, you could get tech manuals on CD from places
such as http://www.applerescue.com/ (they have OS installers
on disc for sale there, primarily) and also a search of the web
may get you a source of tech books for repair service. -
Printer is overprinting old jobs on top of new jobs. Using a Mac with OSx and a HP photosmart for over a year. this just started happening.
RReset printing system again and the restart in Safe Mode . This will clear some caches,to do this hold down the Shift key when you hear the startup tone until a progress bar appears, after it has fully booted restart normally and add the printer.
-
Creating a new job and position prompts customizing request...
Dear All,
I created a Job and Position through PP01 transaction. I am facing 2 issues while doing so...
1. System prompts for Customizing request when i try to save the new entry.
What table/settings do i need to maintain for turning of the customizing request promptings.
2. Once i save the entries(after entering some dummy customizing requests), when i check the
HRP1000 table for the new jobs and positions... The table entry shows 2 records for each Job and
position. One entry with Plan version '.:' and another with active Plan version '1'.
I need to have just one entry in HRP1000 table for each job/position with ACTIVE plan version.
I checked T77S0 table, it has active plan version maintained against the PLOGI-PLOGI entry.
Please let me know what table i need to maintain to handle my requirement.
Regards
NandaHi Nanda,
When you create new job or position in sandbox system it will not ask for the request number,since you generally dont transport the objects from sandbox to test system.
When you create a new job or position in development system, it will always ask for request number. This is because, in most of the cases, you need to transport the job and position to test system and then to production system.
Without a customizing request you wont be able to transport those changes to next system.
Thanks,
Supriya. -
Problems with SwingWorker and classes in my new job, ;), can you help me?
Hi all, ;)
First of all, sorry about my poor English.
I have a problem with Swing and Threads, I hope you help me (because I'm in the firsts two weeks in my new job)
I have two classes:
Form1: Its a JPanel class with JProgressBar and JLabel inside.
FormularioApplet: (the main) Its a JPanel class with a form1 inside.
I have to download a file from a server and show the progress of the download in the JProgressBar. To make it I do this:
In Form1 I make a Thread that update the progress bar and gets the fole from the server.
In FormularioApplet (the main) I call to the method getDownloadedFile from Form1 to get the File.
THE PROBLEM:
The execution of FormularioApplet finishes before the Thread of Form1 (with download the file) download the file. Then, when I call in FormularioApplet the variable with the file an Exception: Exception in thread "AWT-EventQueue-1" java.lang.NullPointerException is generated.
First main begins his execution, then call to Form1 (a thread) then continues his execution and when the execution is finished ends the execution os Form1 and his thread.
How can I do for main class call the function and the Thread download his file after main class assign the file of return method?
How can I pass information froma class include an a main class. Form1 can't send to main (because main class made a Form1 f1 = new Form1()) any information from his end of the execution. I think if Form1 can say to main class that he finishes is job, then main class can gets the file.
I put in bold the important lines.
Note: My level of JAVA, you can see, is not elevated.
THANKS A LOT
Form1 class:
package es.cambrabcn.signer.gui;
import java.awt.HeadlessException;
import java.io.ByteArrayOutputStream;
import java.io.IOException;
import java.io.InputStream;
import java.net.MalformedURLException;
import java.net.URL;
import java.util.StringTokenizer;
import java.util.Vector;
import javax.swing.SwingUtilities;
public class Form1 extends javax.swing.JPanel {
//Variables relacionadas con la clase original DownloadProgressBar
private InputStream file;
private int totalCicles;
private int totalFiles;
private int currentProgress;
private SwingWorker worker;
private ByteArrayOutputStream byteArray;
private boolean done;
/** Creates new form prueba */
public Form1() {
initComponents();
this.byteArray = new ByteArrayOutputStream();
progressBar.setStringPainted(true);
//this.totalFiles = totalFiles;
currentProgress = 0;
/** This method is called from within the constructor to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
// <editor-fold defaultstate="collapsed" desc=" C�digo Generado ">
private void initComponents() {
label1 = new javax.swing.JLabel();
progressBar = new javax.swing.JProgressBar();
statusLabel = new javax.swing.JLabel();
setBackground(new java.awt.Color(255, 255, 255));
setMaximumSize(new java.awt.Dimension(300, 150));
setMinimumSize(new java.awt.Dimension(300, 150));
setPreferredSize(new java.awt.Dimension(300, 150));
label1.setFont(new java.awt.Font("Arial", 1, 18));
label1.setHorizontalAlignment(javax.swing.SwingConstants.CENTER);
label1.setText("Barra de progreso");
statusLabel.setHorizontalAlignment(javax.swing.SwingConstants.CENTER);
statusLabel.setText("Cargando");
org.jdesktop.layout.GroupLayout layout = new org.jdesktop.layout.GroupLayout(this);
this.setLayout(layout);
layout.setHorizontalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(org.jdesktop.layout.GroupLayout.TRAILING, layout.createSequentialGroup()
.addContainerGap()
.add(layout.createParallelGroup(org.jdesktop.layout.GroupLayout.TRAILING)
.add(org.jdesktop.layout.GroupLayout.LEADING, statusLabel, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 280, Short.MAX_VALUE)
.add(org.jdesktop.layout.GroupLayout.LEADING, progressBar, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 280, Short.MAX_VALUE)
.add(org.jdesktop.layout.GroupLayout.LEADING, label1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 280, Short.MAX_VALUE))
.addContainerGap())
layout.setVerticalGroup(
layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(layout.createSequentialGroup()
.addContainerGap()
.add(label1)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(progressBar, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(statusLabel)
.addContainerGap(73, Short.MAX_VALUE))
}// </editor-fold>
// Declaraci�n de variables - no modificar
private javax.swing.JLabel label1;
private javax.swing.JProgressBar progressBar;
private javax.swing.JLabel statusLabel;
// Fin de declaraci�n de variables
public byte[] getDownloadedFile(String documentToSign){
//Variables locales
byte puente[] = null;
try{
//Leemos el documento a firmar
StringTokenizer st = new StringTokenizer(documentToSign, ";");
Vector<URL> fileURL = new Vector<URL>();
HttpSender sender = new HttpSender(null);
//Introducimos la lista de URLs de archivos a bajar en el objeto Vector
for(; st.hasMoreTokens(); fileURL.add(new URL(st.nextToken())));
//Para cada URL descargaremos un archivo
for(int i = 0; i < fileURL.size(); i++) {
file = sender.getMethod((URL)fileURL.get(i));
if(file == null) {
Thread.sleep(1000L);
throw new RuntimeException("Error descarregant el document a signar.");
System.out.println("Form1 Dentro de getDownloadFile, Antes de startDownload()");
//Fijamos el valor del n�mero de ciclos que se har�n seg�n el tama�o del fichero
this.totalCicles = sender.returnCurrentContentLength() / 1024;
this.progressBar.setMaximum(totalCicles);
//Modificamos el texto del JLabel seg�n el n�mero de fichero que estemos descargando
this.statusLabel.setText((new StringBuilder("Descarregant document ")).append(i + 1).append(" de ").append(fileURL.size()).toString());
statusLabel.setAlignmentX(0.5F);
*//Iniciamos la descarga del fichero, este m�todo llama internamente a un Thread*
*this.startDownload();*
*System.out.println("Form1 Dentro de getDownloadFile, Despu�s de startDownload()");*
*//if (pane.showProgressDialog() == -1) {*
*while (!this.isDone()){*
*System.out.println("No est� acabada la descarga");*
*if (this.isDone()){*
*System.out.println("Thread ACABADO --> Enviamos a puente el archivo");*
*puente = this.byteArray.toByteArray();*
*System.out.println("Form1 getDownloadFile() tama�o puente: " + puente.length);*
*else{*
*Thread.sleep(5000L);*
*// throw new RuntimeException("Proc�s de desc�rrega del document a signar cancel�lat.");*
catch (HeadlessException e) {
//javascript("onSignError", new String[] {
//(new StringBuilder("UI: ")).append(e.getMessage()).toString()});
e.printStackTrace();
catch (MalformedURLException e) {
//javascript("onSignError", new String[] {
//(new StringBuilder("CMS: ")).append(e.getMessage()).toString()});
e.printStackTrace();
catch (HttpSenderException e) {
//javascript("onSignError", new String[] {
//(new StringBuilder("CMS: ")).append(e.getMessage()).toString()});
e.printStackTrace();
catch (InterruptedException e) {
//javascript("onSignError", new String[] {
//(new StringBuilder("CMS: ")).append(e.getMessage()).toString()});
e.printStackTrace();
//System.out.println("Form1 getDownloadFile() tama�o puente: " + puente.length);
return puente;
public void updateStatus(final int i){
Runnable doSetProgressBarValue = new Runnable() {
public void run() {
progressBar.setValue(i);
SwingUtilities.invokeLater(doSetProgressBarValue);
public void startDownload() {
System.out.println("Form1 Inicio startDownload()");
System.out.println("Form1 Dentro de startDownload, antes de definir la subclase SwingWorker");
System.out.println(done);
worker = new SwingWorker() {
public Object construct() {
System.out.println("Form1 Dentro de startDownload, dentro de construct(), Antes de entrar en doWork()");
return doWork();
public void finished() {
System.out.println("Form1 Dentro de startDownload, dentro de finished(), Antes de asignar done = true");
System.out.println(done);
done = true;
System.out.println("Form1 Dentro de startDownload, dentro de finished(), Despu�s de asignar done = true");
System.out.println(done);
statusLabel.setText("Completado, tama�o del archivo: " + (byteArray.size() / 1024) + "KB");
System.out.println("Form1 Dentro de startDownload, antes de worker.start()");
worker.start();
System.out.println("Form1 Dentro de startDownload, antes de salir de startDownload");
System.out.println(done);
System.out.println("Form1 Dentro de startDownload, despu�s de worker.start()");
* M�todo doWork()
* Este m�todo descarga por partes el archivo que es necesario descargar, adem�s de actualizar
* la barra de carga del proceso de carga de la GUI.
public Object doWork() {
System.out.println("Form1 doWork() this.byteArray.size(): " + this.byteArray.size());
try {
byte buffer[] = new byte[1024];
for(int c = 0; (c = this.file.read(buffer)) > 0;) {
this.currentProgress++;
updateStatus(this.currentProgress);
this.byteArray.write(buffer, 0, c);
this.byteArray.flush();
this.file.close();
this.currentProgress = totalCicles;
updateStatus(this.currentProgress);
} catch(IOException e) {
e.printStackTrace();
System.out.println("Form1 doWork() FINAL this.byteArray.size(): " + this.byteArray.size());
//done = true;
System.out.println("AHORA DONE = TRUE");
return "Done";
public boolean isDone() {
return this.done;
FormularioApplet class (main)
package es.cambrabcn.signer.gui;
import java.awt.Color;
import java.io.File;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.net.URL;
import java.security.Security;
import java.util.StringTokenizer;
import java.util.Vector;
import javax.swing.SwingUtilities;
import netscape.javascript.JSObject;
import org.bouncycastle.jce.provider.BouncyCastleProvider;
import sun.security.provider.Sun;
import be.cardon.cryptoapi.provider.CryptoAPIProvider;
public class FormularioApplet extends java.applet.Applet {
//Variables globales
int paso = 0;
private static final String JS_ONLOAD = "onLoad";
private static final String JS_ONLOADERROR = "onLoadError";
private static final int SIGNATURE_PDF = 1;
private static final int SIGNATURE_XML = 2;
//private String signButtonValue;
private int signatureType;
private String documentToSign;
private String pdfSignatureField;
private Vector<String> outputFilename;
private Color appletBackground = new Color(255, 255, 255);
private Vector<byte[]> ftbsigned;
* Initializes the applet FormularioApplet
public void init(){
try {
SwingUtilities.invokeLater(new Runnable() {
//SwingUtilities.invokeAndWait(new Runnable() {
//java.awt.EventQueue.invokeAndWait(new Runnable() {
public void run() {
try{
readParameters();
initComponents();
catch(FileNotFoundException e){
javascript(JS_ONLOADERROR, new String[] {
(new StringBuilder("Init: ")).append(e.getMessage()).toString()});
e.printStackTrace();
catch(IOException e) {
javascript(JS_ONLOADERROR, new String[] {
(new StringBuilder("Init: ")).append(e.getMessage()).toString()});
e.printStackTrace();
catch (Exception e) {
javascript(JS_ONLOADERROR, new String[] {
(new StringBuilder("Init: ")).append(e.getMessage()).toString()});
e.printStackTrace();
javascript(JS_ONLOAD, null);
/** This method is called from within the init() method to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
// <editor-fold defaultstate="collapsed" desc=" C�digo Generado ">
private void initComponents() {
this.setSize(350, 450);
appletPanel = new javax.swing.JPanel();
jPanel1 = new javax.swing.JPanel();
jTextField1 = new javax.swing.JLabel();
jPanel2 = new javax.swing.JPanel();
label = new javax.swing.JLabel();
jPanel3 = new javax.swing.JPanel();
jButton1 = new javax.swing.JButton();
jButton2 = new javax.swing.JButton();
setLayout(new java.awt.BorderLayout());
appletPanel.setBackground(new java.awt.Color(255, 255, 255));
appletPanel.setMaximumSize(new java.awt.Dimension(350, 430));
appletPanel.setMinimumSize(new java.awt.Dimension(350, 430));
appletPanel.setPreferredSize(new java.awt.Dimension(350, 430));
jPanel1.setBackground(new java.awt.Color(255, 255, 255));
jPanel1.setBorder(javax.swing.BorderFactory.createLineBorder(new java.awt.Color(0, 102, 204)));
jTextField1.setFont(new java.awt.Font("Arial", 1, 18));
jTextField1.setHorizontalAlignment(javax.swing.SwingConstants.CENTER);
jTextField1.setText("SIGNATURA ELECTRONICA");
org.jdesktop.layout.GroupLayout jPanel1Layout = new org.jdesktop.layout.GroupLayout(jPanel1);
jPanel1.setLayout(jPanel1Layout);
jPanel1Layout.setHorizontalGroup(
jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel1Layout.createSequentialGroup()
.addContainerGap()
.add(jTextField1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 308, Short.MAX_VALUE)
.addContainerGap())
jPanel1Layout.setVerticalGroup(
jPanel1Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel1Layout.createSequentialGroup()
.addContainerGap()
.add(jTextField1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 24, Short.MAX_VALUE)
.addContainerGap())
jPanel2.setBackground(new java.awt.Color(255, 255, 255));
jPanel2.setBorder(javax.swing.BorderFactory.createLineBorder(new java.awt.Color(0, 102, 204)));
label.setHorizontalAlignment(javax.swing.SwingConstants.CENTER);
label.setIcon(new javax.swing.ImageIcon("C:\\java\\workspaces\\cambrabcn\\firmasElectronicas\\logo.gif"));
org.jdesktop.layout.GroupLayout jPanel2Layout = new org.jdesktop.layout.GroupLayout(jPanel2);
jPanel2.setLayout(jPanel2Layout);
jPanel2Layout.setHorizontalGroup(
jPanel2Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel2Layout.createSequentialGroup()
.addContainerGap()
.add(label, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, 308, Short.MAX_VALUE)
.addContainerGap())
jPanel2Layout.setVerticalGroup(
jPanel2Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(jPanel2Layout.createSequentialGroup()
.addContainerGap()
.add(label)
.addContainerGap(229, Short.MAX_VALUE))
jPanel3.setBackground(new java.awt.Color(255, 255, 255));
jPanel3.setBorder(javax.swing.BorderFactory.createLineBorder(new java.awt.Color(0, 102, 204)));
//this.jButton1.setVisible(false);
//this.jButton2.setVisible(false);
jButton1.setText("Seg\u00fcent");
jButton1.setAlignmentX(0.5F);
//Cargamos el primer formulario en el JPanel2
loadFirstForm();
//Modificamos el texto del bot�n y el contador de pasos.
//this.jButton1.setText("Siguiente");
//this.jButton1.setVisible(true);
//this.jButton2.setVisible(true);
jButton1.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jButton1ActionPerformed(evt);
jButton2.setText("Cancel\u00b7lar");
jButton2.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jButton2ActionPerformed(evt);
org.jdesktop.layout.GroupLayout jPanel3Layout = new org.jdesktop.layout.GroupLayout(jPanel3);
jPanel3.setLayout(jPanel3Layout);
jPanel3Layout.setHorizontalGroup(
jPanel3Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(org.jdesktop.layout.GroupLayout.TRAILING, jPanel3Layout.createSequentialGroup()
.addContainerGap()
.add(jButton1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 94, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED, 112, Short.MAX_VALUE)
.add(jButton2, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, 102, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addContainerGap())
jPanel3Layout.setVerticalGroup(
jPanel3Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(org.jdesktop.layout.GroupLayout.TRAILING, jPanel3Layout.createSequentialGroup()
.addContainerGap()
.add(jPanel3Layout.createParallelGroup(org.jdesktop.layout.GroupLayout.BASELINE)
.add(jButton2)
.add(jButton1))
.addContainerGap())
org.jdesktop.layout.GroupLayout appletPanelLayout = new org.jdesktop.layout.GroupLayout(appletPanel);
appletPanel.setLayout(appletPanelLayout);
appletPanelLayout.setHorizontalGroup(
appletPanelLayout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(org.jdesktop.layout.GroupLayout.TRAILING, appletPanelLayout.createSequentialGroup()
.addContainerGap()
.add(appletPanelLayout.createParallelGroup(org.jdesktop.layout.GroupLayout.TRAILING)
.add(org.jdesktop.layout.GroupLayout.LEADING, jPanel2, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE)
.add(org.jdesktop.layout.GroupLayout.LEADING, jPanel1, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE)
.add(org.jdesktop.layout.GroupLayout.LEADING, jPanel3, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE))
.addContainerGap())
appletPanelLayout.setVerticalGroup(
appletPanelLayout.createParallelGroup(org.jdesktop.layout.GroupLayout.LEADING)
.add(org.jdesktop.layout.GroupLayout.TRAILING, appletPanelLayout.createSequentialGroup()
.addContainerGap()
.add(jPanel1, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(jPanel2, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, Short.MAX_VALUE)
.addPreferredGap(org.jdesktop.layout.LayoutStyle.RELATED)
.add(jPanel3, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE, org.jdesktop.layout.GroupLayout.DEFAULT_SIZE, org.jdesktop.layout.GroupLayout.PREFERRED_SIZE)
.addContainerGap())
add(appletPanel, java.awt.BorderLayout.CENTER);
}// </editor-fold>
private void jButton2ActionPerformed(java.awt.event.ActionEvent evt) {
this.destroy();
private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) {
changeForms(this.paso);
// Declaraci�n de variables - no modificar
private javax.swing.JPanel appletPanel;
private javax.swing.JButton jButton1;
private javax.swing.JButton jButton2;
private javax.swing.JPanel jPanel1;
private javax.swing.JPanel jPanel2;
private javax.swing.JPanel jPanel3;
private javax.swing.JLabel jTextField1;
private javax.swing.JLabel label;
// Fin de declaraci�n de variables
* M�todo readParameters
* M�todo que inicializa los valores de los par�metros internos, recibidos por par�metro.
private void readParameters() throws FileNotFoundException, IOException {
???????????????? deleted for the forum
addSecurityProviders();
* M�tode loadFirstForm
* Aquest m�tode carrega a jPanel2 el formulari que informa sobre la c�rrega dels arxius
private void loadFirstForm(){
//Form1 f1 = new Form1(stream, i + 1, fileURL.size(), sender.returnCurrentContentLength(), appletBackground);
//Form1 f1 = new Form1(fileURL.size(), sender.returnCurrentContentLength());
Form1 f1 = new Form1();
//Lo dimensionamos y posicionamos
f1.setSize(310, 150);
f1.setLocation(10, 110);
//A�adimos el formulario al JPanel que lo contendr�
this.jPanel2.add(f1);
//Validem i repintem el JPanel
jPanel2.validate();
jPanel2.repaint();
//Descarreguem l'arxiu a signar
*System.out.println("FormularioApplet Dentro de loadFirstForm(), antes de llamar a getDownloadFile()");*
*byte obj[] = f1.getDownloadedFile(this.documentToSign);*
if (obj == null){
System.out.println("Lo que devuelve f1.getDownloadedFile(this.documentToSign) es NULL");
else{
System.out.println("Lo que devuelve f1.getDownloadedFile(this.documentToSign) NO es NULL");
System.out.println("obj: " + obj.length);
this.ftbsigned.add(obj);
System.out.println("FormularioApplet Dentro de loadFirstForm(), despu�s de llamar a getDownloadFile()");
//Indicamos que el primer paso ya se ha efectuado
this.paso++;
* M�tode changeForms
* Aquest m�tode carrega a jPanel2 un formulari concret segons el valor de la variable global "paso"
private void changeForms(int paso){
/*A cada paso se cargar� en el JPanel y formulario diferente
* Paso previo: Se realiza en la inicializaci�n, carga el formulario, descarga el archivo y muestra la barra de carga.
* Case 1: Se carga el formulario de selecci�n de tipo de firma.
* Case 2: Se carga el formulario de datos de la persona que firma.
this.paso = paso;
switch(paso){
case 1:
//Creamos un objeto de formulario (seleccion de tipo de firma)
Form2 f2 = new Form2();
//Lo dimensionamos y posicionamos
f2.setSize(310, 185);
f2.setLocation(10, 110);
//Quitamos el formulario 1 y a�adimos el formulario 2 al JPanel
this.jPanel2.remove(1);
this.jPanel2.add(f2);
//Validem i repintem el JPanel
jPanel2.validate();
jPanel2.repaint();
//Modificamos el contador de pasos.
this.paso++;
break;
case 2:
//Creamos un objeto de formulario (seleccion de tipo de firma)
Form3 f3 = new Form3();
//Lo dimensionamos y posicionamos
f3.setSize(310, 175);
f3.setLocation(15, 130);
//Quitamos el formulario 1 y a�adimos el formulario 3 al JPanel
this.jPanel2.remove(1);
this.jPanel2.add(f3);
//Validem i repintem el JPanel
jPanel2.validate();
jPanel2.repaint();
//Modificamos el texto del bot�n y el contador de pasos.
this.jButton1.setText("Finalizar");
this.paso++;
break;
default:
//Finalizar el Applet
//C�digo que se encargue de guardar el archivo en el disco duro del usuario
break;
private void addSecurityProviders() throws FileNotFoundException, IOException {
Security.addProvider(new CryptoAPIProvider());
if (signatureType == SIGNATURE_PDF) {
Security.addProvider(new BouncyCastleProvider());
else {
Security.addProvider(new Sun());
private File createOutputFile(String filename, int index) {
return new File((String)outputFilename.get(index));
protected Object javascript(String function, String args[]) throws RuntimeException {
//Remove
if (true) return null;
try {
Vector<String> list = new Vector<String>();
if(args != null) {
for(int i = 0; i < args.length; i++) {
list.addElement(args);
if(list.size() > 0) {
Object objs[] = new Object[list.size()];
list.copyInto(objs);
return JSObject.getWindow(this).call(function, objs);
} catch(UnsatisfiedLinkError e) {
e.printStackTrace();
throw new RuntimeException((new StringBuilder()).append(e).append("\nFunci�: ").append(function).toString());
} catch(Throwable e) {
e.printStackTrace();
throw new RuntimeException((new StringBuilder()).append(e).append("\nFunci�: ").append(function).toString());
return JSObject.getWindow(this).call(function, new Object[0]);
Edited by: Kefalegereta on Oct 31, 2007 3:54 AM
Edited by: Kefalegereta on Oct 31, 2007 4:00 AMLook at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
How to create a new variant and a job sheduled to use it for the ......
How to create a new variant and a job sheduled to use it for the exisisting programs
Hi
1. The ALV Grid Control is a tool with which you can output non-hierarchical lists in a
standardized format. The list data is displayed as a table on the screen.
The ALV Grid Control offers a range of interactive standard list functions that users need
frequently (find, sort, filter, calculate totals and subtotals, print, print preview, send list,
export list (in different formats), and so on. These functions are implemented in the
proxy object class. You as the programmer have the possibility to turn off functions not
needed. In most cases the implementations of the standard functions provided by the
control are sufficient. However, if required, you can adjust these implementations to
meet application-specific needs.
You can add self-defined functions to the toolbar, if necessary.
The ALV Grid Control allows users to adjust the layout of lists to meet their individual
requirements (for example, they can swap columns, hide columns, set filters for the
data to be displayed, calculate totals, and so on). The settings (list customizing) made
by a specific user are called a display variant. Display variants can be saved on a userspecific
or on a global basis. If such display variants exist for a list, they can be offered
to the user for selection. If a display variant is set as the default variant, the associated
list is always displayed based on the settings of this variant.
2. REUSE_ALV_LIST_DISPLAY
REUSE_ALV_GRID_DISPLAY
REUSE_ALV_FIELDCATALOG_MERGE
REUSE_ALV_COMMENTARY_WRITE
3. Use of Field Catalog is to determines the technical properties & add formating information of the column.
6. all the definition of internal table, structure, constants are declared in a type-pool called SLIS.
7.fieldcat-fieldname
fieldcat-ref_fieldname
fieldcat-tabname
fieldcat-seltext_m
5. Form user_command using r_ucomm like sy-ucomm rs_selfield type slis_selfield.
Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length.
In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output.
The report output can contain up to 90 columns in the display with the wide array of display options.
<b>The commonly used ALV functions used for this purpose are;</b>
1. REUSE_ALV_VARIANT_DEFAULT_GET
2. REUSE_ALV_VARIANT_F4
3. REUSE_ALV_VARIANT_EXISTENCE
4. REUSE_ALV_EVENTS_GET
5. REUSE_ALV_COMMENTARY_WRITE
6. REUSE_ALV_FIELDCATALOG_MERGE
7. REUSE_ALV_LIST_DISPLAY
8. REUSE_ALV_GRID_DISPLAY
9. REUSE_ALV_POPUP_TO_SELECT
Purpose of the above Functions are differ not all the functions are required in all the ALV Report.
But either no.7 or No.8 is there in the Program.
<b>
How you call this function in your report?</b>
After completion of all the data fetching from the database and append this data into an Internal Table. say I_ITAB.
Then use follwing function module.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'Prog.name'
I_STRUCTURE_NAME = 'I_ITAB'
I_DEFAULT = 'X'
I_SAVE = 'A'
TABLES
T_OUTTAB = I_ITAB.
IF SY-SUBRC <> 0.
WRITE: 'SY-SUBRC: ', SY-SUBRC .
ENDIF.
ENDFORM. " GET_FINAL_DATA
The object F_IT_ALV has a field, the activity ACTVT, which can
contain four permitted values: 01, 02, 03 and 70. Each of the
activities 01, 02 and 70 controls the availability of particular
functions (in the menu and the toolbar) of the ALV line item list:
a) 01: "Settings -> Display variant -> Save..."
b) 02: "Settings -> Display variant -> Current..." and
"Settings -> Display variant -> Current header rows "
c) 70: "Settings -> Display variant -> Administration..."
Activity 03 corresponds to the minimum authorization, which is the
most restricted one: The user can only select layouts which have
been configured already. In particular, all of the other functions
named above are inactive with activity 03.
Now if you want to permit a user to change the column selection and
the headers as well as to save the layout thus created, for example,
but if you do not want to permit the user to administrate the
layouts, you grant him or her the authorization for activities 01
and 02.
Check this link it will be mosty usefull for u
http://www.sap-img.com/fu017.htm
Reward all helpfull answers
Regards
Pavan -
I'm not sure if i am in the right room to ask but, i got a new job and my w-4 is online threw the adobe acrobat reader ans is filled out but it wont connect to the browser to get it submitted. what is wrong?@
I doubt that the W-4 has a submit button. If you are using Reader XI (actually the topic of the Reader forum, not this one), you should be able to save it and then print and deliver. If it is set to be submitted by the browser, then it may be your Reader and the browser are not talking properly. If there is a generic URL that you can provide that has the W-4, we might be able to give you more info. A lot depends on what your particular form looks like. Hand carrying it should always be an option.
-
Uniques constraint violation error while executing statspack.snap
Hi,
I have configured a job to run the statspack snap at a interval of 20 min from 6:00 PM to 3:00 AM . Do perform this task , I have crontab 2 scripts : one to execute the job at 6 PM and another to break the job at 3 AM. My Oracle version is 9.2.0.7 and OS env is AIX 5.3
My execute scripts look like:
sqlplus perfstat/perfstat <<EOF
exec dbms_job.broken(341,FALSE);
exec dbms_job.run(341);
The problem is , that the job work fine for weekdays but on weekend get aborted with the error :
ORA-12012: error on auto execute of job 341
ORA-00001: unique constraint (PERFSTAT.STATS$SQL_SUMMARY_PK) violated
ORA-06512: at "PERFSTAT.STATSPACK", line 1361
ORA-06512: at "PERFSTAT.STATSPACK", line 2471
ORA-06512: at "PERFSTAT.STATSPACK", line 91
ORA-06512: at line 1
After looking on to metalink , I came to know that this is one listed bug 2784796 which was fixed in 10g.
My question is , why there is no issue on weekdays using the same script. There is no activity on the db on weekend and online backup start quite late at night.
Thanks
AnkyThe reasons for hitting this bug are explained in Metalink, "...cursors with same sql text (at least 31 first characters), same hash_value but a different parent cursor...", you can also find the workaround in Note:393300.1.
Enrique -
Stopping Statspack snap to run automatically
Hello All,
The statspack snap is being executed automatically every 15minutes. I want to stop this process.
SQL> select * from user_jobs;
no rows selected
column begin_interval_time format A25
column END_interval_time format A25
SELECT snap_id, begin_interval_time, end_interval_time
FROM dba_hist_snapshot
ORDER BY 1
SNAP_ID BEGIN_INTERVAL_TIME END_INTERVAL_TIME
205 05-OCT-12 11.30.55.051 AM 05-OCT-12 11.45.07.392 AM
206 05-OCT-12 11.45.07.392 AM 05-OCT-12 12.00.07.900 PM
207 05-OCT-12 12.00.07.900 PM 05-OCT-12 12.15.08.347 PM
208 05-OCT-12 12.15.08.347 PM 05-OCT-12 12.30.08.808 PM
209 05-OCT-12 12.30.08.808 PM 05-OCT-12 12.45.09.325 PM
210 05-OCT-12 12.45.09.325 PM 05-OCT-12 01.00.09.806 PM
211 05-OCT-12 01.00.09.806 PM 05-OCT-12 01.15.10.277 PM
212 05-OCT-12 01.15.10.277 PM 05-OCT-12 01.30.01.823 PM
213 05-OCT-12 01.30.01.823 PM 05-OCT-12 01.45.01.743 PMHow to stop the statspack snap being taken automatically?Madhu.149 wrote:
Hello All,
The statspack snap is being executed automatically every 15minutes. I want to stop this process.
<snip>
>
How to stop the statspack snap being taken automatically?So did you create the job with the code I gave you at Reg: Statspack schedule ?
If so, you can drop the job with
begin
DBMS_SCHEDULER.drop_job (job_name => 'STATSPACK_SNAPSHOTS');
end;
/Also, if so, I'd suggest that when someone hands you some code, you leverage that for your own education. You should go to the reference manual and read up on DBMS_SCHEDULER. Read up on all the related views that give information about scheduled jobs. -
Create Functional Area via Job Architecture in Non-English language
Dear Experts,
We're running following environment.
- Windows Server 2003 Std SP2 64bit (32bit conversion completed)
- SAP ERP 6.0 EhP 4 Unicode system as back-end system for STVN
- STVN 2.1 SP1 with Japanese Language pack
- Language = Japanese and English
- TREX setting is not ready (will be ready soon)
The problem is we cannot create Functional Area via Job Architecture
if we log on Job Architecture module with JAPANESE.
(We can create Functional Area if we log on with ENGLISH)
[Procedure]
1. Launch Job Architecture module with Japanese
2. Job Architecture => Create Functional Area (under Tasks)
3. Key in [Title] and [Abbreviation], and then click [Add]
4. Error message "Not able to load DLL or CLASS" appears
I have already confirmed that if I do same thing with English,
Functional Area was created in ECC environment.
What settings am I missing?
Best Regards,
Masaya IizumiDear Luke and Eugene
Thank you very much for the reply.
I have understood that it is known issue for .NET platform for 2.1 SP1.
I will communicate with Nakisa Support.
Again, thank you very much for your kind cooperation.
Best Regards,
Masaya -
Is there anyway that I can sync this Motorola G5 dual, OS 10.5.8 with my ibook OS 10.6.8 so I can use the quicktime application on the Mororola? I need to network the two computers and if someone could kindly tell me how to do this with either wifi, USB, orFirewire, I'd be very grateful. My ethernet connection is in use and I only have one and no hub. Doing this will give me the ability to work for a site that needs my expertise in recording but I have old equipment right now on the recording end. No chance to upgrade at this point as we're broke and I'm severly injured, so I am trying to find a workaround that will let me access this copmuter, with snow leapord to work with the old one with (Motorola G5 dual w/10.5.8). It means a few bucks to us if I can make it happen, and my family really need to dough. It will keep me from having to convert things to a youtube format, take the extra time involved to do that, when, instead, I could just take screen recordings instead. Unfortunately, I don't have Pro Tools on this computer or all would be fixable.
I'm really hoping that you or someone else can help me get these two macs synced so I can do this. DO you think you can help me? Thanks so much! Scotty GoldbergThanks so much for your reply but that won't help in my current situation. Maybe I didn't make it clear. The latest version of Quicktime as new as it sounds doesn't support screen recording on a powermac G5 Motorola chip with OS 10.5.8 which is the highest os I can go with that machine. If I can sync the two computers so I can get the application to record from my newer computer then I'm ok. I just don't have the recording application for audio that I'm using to demo for the website on the laptop as it's about 10,000 dollars. So, I have to use the older computer to do the audio presentation and try to get the newer computer synced to it so I can use the new version that works on snow leopard to record a screen shot that will hopefully appear on my laptop instead of the old machine. Hope that makes sense. It's a bit confusing but in a nutshell it's like this:
1. I am a Pro Tools Instructor which is the state of the art application and recording device for audio and movie scoring and I have a new job where I make small snippets of tips using Pro Tools which I'd like to record with quicktime on screen as they happen
2. the best version of Quicktime Pro available for the Power Mac, OS 10.5.8 will not do screen recording on it.
3. I can use the Quicktime application from my newer laptop but I need to sync it to the old machine
4. I'm hoping but I don't know, if I do this, that I can record Pro Tools in action from my new machine buy seeing it on this laptop screen and then recording it with the new quicktime.
5. If I can sync the two computers, I'm hoping this can happen but I can't use my ethernet connection as I have it used to connect to my recording console and can't afford to buy anything new like an ethernet hub yo connect the two so I'm hoping that there's another way to connect them.
I hope that makes sense and that possible you or someone else can help. Thanks so much! Scott -
CA error - when adding a new job.
Hi,
Receive the below error while invoking a job on CA.
when try to add a new job ->select template->Select Environment->Select Initial upgrade->Exception comes
jre1.6.0_03 installed in the server.
Exception java.lang.NumberFormatException caught in sun.misc.FloatingDecimal.readJavaFormatString() empty String java.lang.NumberFormatException: empty String at sun.misc.FloatingDecimal.readJavaFormatString(Unknown Source) at java.lang.Float.valueOf(Unknown Source) at com.peoplesoft.pt.changeassistant.Job.initStatus(Job.java:715) at
Performed the below action but issue not resolved.
--Make sure that when creating the Environments for the Upgrade, that the correct ids and passwords have been entered. A userid and userid password plus the accessid and accessid password need to be entered. The connectid, many times "People", should not be entered where accessid is supposed to be entered.
--Reinstall the Change Assistant
--Be sure that the accessid and password being used is valid.
--Be sure that there is not an & character in PSRELEASE.Releaselabel column. Change this to a text 'and' if you find one there.
Thanks
SoundappanIn the installation notes of PeopleTools 8.52.07 at the bottom it says:
PATCH NOTES
IMPORTANT: Please read this section in its entirety before applying the PeopleTools 8.52.07 patch. This section covers any last-minute information or existing issues that may impact your PeopleSoft implementation whether or not you choose to apply this PeopleTools patch. This section does not list the items fixed/included in this patch. Information on patch content can be accessed via instructions found at the bottom of this UserDoc.
13906590 – Change Assistant gives error while creating a new job for upgrade
Problem: Change Assistant gives error while creating a new job for upgrade
Workaround:
DB2 customers running Change Assistant must set the variable 'override_connection_reset' to the value 1 in the following registry key:
HKEY_CURRENT_USER\Software\PeopleSoft\PeopleTools\Release8.40\Profiles\Default\Database Options
When they are done using Change Assistant, they must change the value to 0 before they use any other PeopleSoft 2 tier applications.
That look a lot like your issue :)
Try setting the registry key value as defined above to see if it solves your issue. -
Unique Constraint error while executing statspack.snap procedure
The following is the error which popped up when i was trying to execute statspack.snap procedure from perfstat user:
ORA-00001: unique constraint (PERFSTAT.STATS$LATCH_CHILDREN_PK) violated
ORA-06512: at "PERFSTAT.STATSPACK", line 1619
ORA-06512: at "PERFSTAT.STATSPACK", line 71
ORA-06512: at line 1
How could i resolve such a problem, as all the constraints and objects for this user are created while running the oracle supplied script 'spcreate.sql'.
If any 1 knows how to handle such a situation , can come forward n please help me out.SQL> execute statspack.snap (i_snap_level=>10);
ERROR at line 1:
ORA-00001: unique constraint (PERFSTAT.STATS$LATCH_CHILDREN_PK) violated
ORA-06512: at "PERFSTAT.STATSPACK", line 1619
ORA-06512: at "PERFSTAT.STATSPACK", line 71
ORA-06512: at line 1
Cause
-- Its because of the bug # 2384758.
"STATSPACK.SNAP GIVES ORA-1 ON STATS$LATCH_CHILDREN_PK WHEN I_SNAP_LEVEL=>10"
-- The STATS$LATCH_CHILDREN table has a primary key constraint on (snap_id, dbid, instance_number, latch#, child#).
Fix
-- This is fixed in 9.0.2 and will not be backported to earlier versions because the level 10 is not a normal level to be setting unless requested by oracle support. -
With Abhiram Kramadhati
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about the upgrade, migration methods, and new features of the latest released Version 10.0 of Cisco Unified Contact Center Express (UCCX) with Cisco expert Abhiram Kramadhati.
Abhiram will address the following on the latest release of Cisco UCCX Version 10.0:
Installation
Upgrade from previous versions - both Linux and Windows
Migration from MCS to Cisco UCS environment - Different methods and best practices
New features - Overview and limitations
This discussion will center on install and upgrade best practices, changes in hardware support, and migration methods from MCS to Cisco UCS. He can also briefly discuss the new features introduced in 10.0. The discussion focuses the latest versions, but queries about general Cisco UCCX topics can be addressed too if time allows.
Abhiram Kramadhati is an engineer with the Contact Center Backbone group. He has been working with Cisco UCCX since he joined Cisco. During two years at Cisco, he has built his expertise around Cisco UCCX telephony applications, Java Telephony API (JTAPI) integration, Cisco UCCX system behavior, LDAP components, and Cisco UCCX as IP interactive voice response in Unified Contact Center Enterprise (UCCE) environments. He also works on other technologies, including Unified Communications Manager and UCCE. He has been involved in many technical escalations in the Asia Pacific region. Abhiram also holds a CCIE in voice (40065).
For more details about this topic, refer to the recently published Tech-Talk Video and Blog.
Remember to use the rating system to let Abhiram know if you have received an adequate response.
Abhiram might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation in the Voice, Video, and Collaboration community, sub-community, Contact Center discussion forum shortly after the event. This event lasts through January 31, 2014. Visit this forum often to view responses to your questions and the questions of other community members.Hi Anurag,
Thanks for your questions.
1:Is there change in DB architecture as CUIC is the only option as compared to previous linux version UCCX ?
I assume this is from the tables regarding historical data. The database schema essentially remains the same since UCCX 9.0 had CUIC too and we had a seperate DB Space for CUIC and we still continue with that. The traditional historical tables remain and the replication process remains the same too.
2:Is there any version change for Linux OS used as VOS,
The Linux version is Red Hat Linux 5. To be precise:
[root@uccx10pub /]# cat etc/redhat-release
Red Hat Enterprise Linux Server release 5.7 (Tikanga)
3:Is there any API architecture change in UCCX 10 from previous releases ?
I can answer this more of an overview. The only enhancement in the API side is the introduction of REST API step in the script editor. You can now make REST calls from the script and this ofcourse opens up a whole new world of possiblities.
4:Since from UCCX 10 , we can only use either CAD or Finnesse at one time, whats the impact of changing this after some time in production, let say , i used CAD for 2 months and then i decided to move to Finesse, whats the impact ? or is it a smooth change as switching CUIC and HRC in previoius release ?
For the scenario you mentioned, there is absolutely no problem. The point to note is that the Finesse services are activated/deactivated but the CAD desktop services are ALWAYS running. The only condition to keep in mind is that you can use ONLY ONE type of agent desktop at any time. Also if Finesse is not used and CAD operations are used extensively, it is advisable to shutdown the Finesse service.
5:Is 3rd Party UCS hardware supported by UCCX 10 instead of using Cisco manufactured UCS , can i use HP hardware for Virtualisation ?
Yes, it can be used. This is something called as "Third party specs based specification". The most important things seen for compatibility are:
Inter CPU Model
It it is on thVMWare Hardware Compatibilty List
You can get more information about this on the "Can I use this server?" section of UC Virtualized Hardware page:
http://docwiki.cisco.com/wiki/UC_Virtualization_Supported_Hardware#.22Can_I_use_this_server.3F.22
6:Is Host name change supported?
Yes, the hostname change is supported. The prcocedure is documented in the UCCX 10.0 Administration Guide:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_10_0/configuration/guide/UCCX_BK_W1AF9DDD_00_uccx-admin-guide-10.0.pdf (Pg 168)
Cheers,
Abhiram Kramadhati -
How to create a database trigger for automatic run statspack.snap
Hi,
I want to create a database trigger to run statspack.snap at startup.
connect /as sysdba
grant create any trigger to perfstat;
connect perfstat/perfstat
create or replace trigger auto_snap
after startup on database
begin
statspack.snap;
end;
after startup on database
error at line 2:
ora-01031: insufficient privileges
connect /as sysdba
create or replace trigger perfstat.auto_snap
after startup on database
begin
statspack.snap;
end;
Trigger created.
after shutdown and startup the database, the trigger has not been run. (no statspack snapshot)
What I have done wrong?981145 wrote:
hi... I have created a database link but it is showing some error. Can you please tell me, do we have to update the details in TNSNAMES.ora file regarding the database which i am creating now before creating database link?????
awaiting for your response,
Thanks in advanceI'm sorry, but "showing some error" is NOT an actionable error message. Why do you think we can solve your error if you don't tell us what the error is?
Yes you will need to adjust your tnsnames. When a process in a database_A accesses database_B via a dblink in database_A, the database_A is acting as a client to database_B. At that point database_A is just like sqlplus or sqldeveloper, and all tns considerations are the same.
Maybe you are looking for
-
Recovering iMessage history after clean install - reindex
With the release of 10.9 and after suffering from some cruft issues in my 10.8 install I decided to do a nuke and pave. I am almost back to 100% however i discovered that my iMessage history no longer present. Reading another post I have found the ar
-
Status in WEB GOA "error in process"
How can i extract in BBP_PD equivalent error in process" i want to extract what are the GOAs are in error in process" since i dont have a option to search via WEB Error in status? i have seen this status Released,Locked,In distribution,Distributed,Di
-
EVENTLISTENERS, VARIABLES, CPU TIME OR SPORTS CAREER.
Hello, I have global variables and event listeners, will they decrease cpu times if they are removed? The delete(); method does not work on dynamic variables such as object, I suppose dynamic variables are simply display object on the stage. Is there
-
Hi, Can we do explicit type casting vigorously in a java class? Im in a situation that i've to do explicit casting 40 to 50 times in a class. Is there any overhead for JVM or any performance issue with this?
-
hey guy, can anyone tell me how to solve this problem, ...i been using the chinese character to type in corel draw and skype and etc... it's work fine but it doesn't show up the charater when i type since i made the 1st save of my document....i encou