RAC using QFS on Sun Solaris 10

Dear DBA's,
I am planning to implement RAC using QFS on Sun Solaris10, i dont have any idea of QFS, kindly provide any document how to use qfs and implement rac using qfs on solaris.
Best Regards,
SG

Please also see these links:
http://www.lmgtfy.com/?q=QFS+Oracle+RAC
http://www.lmgtfy.com/?q=QFS+Oracle+RAC+Oracle+E-Business+Suite
Thanks,
Hussein

Similar Messages

RAC using QFS on Sun Solaris 10 -VIP configuration

Hi DBA's
how to create Virtual IP address in Virtual Box?
I just add in the host file my IP address but i am not able to Ping the Virtual IP address
My host file is as follows. Kindly guide me how to create Virtual IP Address?
bash-3.00# cat /etc/hosts
# Internet host table
::1 localhost
127.0.0.1 localhost
192.168.1.10 rac1.orademo.com rac1
192.168.1.11 rac2.orademo.com rac2
192.168.0.10 rac1-priv.orademo.com rac1-priv
192.168.0.11 rac2-priv.orademo.com rac2-priv
192.168.1.12 rac1-vip.ordemo.com rac1-vip
192.168.1.13 rac2-vip.orademo.com rac2-vip
192.168.1.100 rac-scan.orademo.com rac-scan
192.168.1.6 win
bash-3.00#
Regards,
SG

HI,
Pls mentioned OS and DB version.
Meanwhile check below MOS document for help:-
Modifying the VIP or VIP Hostname of a 10g or 11g Oracle Clusterware Node [ID 276434.1]
Configuring Solaris IP Multipathing (IPMP) for the Oracle 10g VIP [ID 283107.1]
Configuring Linux for the Oracle 10g VIP or private interconnect using bonding driver [ID 298891.1]
Configuring the IBM AIX 5L Operating System for the Oracle 10g VIP [ID 296856.1]
How to Configure Solaris Link-based IPMP for Oracle VIP [ID 730732.1]
Oracle 10g VIP (Virtual IP) changes in Oracle 10g 10.1.0.4 [ID 296878.1]
Thanks,
JD

11g r2 non rac using asm for sun cluster os (two node but non-rac)

I am going to install grid installation for non-rac using asm for two node sun cluster environment..
How to create candidate disk in solaris cluster (sparc os) to install grid home in asm.. please provide me the steps if anyone knows

Please refer the thread Re: 11GR2 ASM in non-rac node not starting... failing with error ORA-29701
and this doc http://docs.oracle.com/cd/E11882_01/install.112/e24616/presolar.htm#CHDHAAHE

Oracle 9i RAC on Sun Solaris 5.10/64 bit version.Is that supported ?

I want to install Oracle 9i RAC on Sun Solaris 10 64 bit. Is that officially supported ?
I dont this combination on metalink certify matrix

I know we dont get support from oracle.But, you initially mentioned that you couldn't find the required information on metalink, therefore I provided that information, which I thought you were looking for.
Is anybody still using this combination ? Does it work ? yes, we are using it and it has been working fine for over 4 years...of course we patched it to the latest - 9.2.0.8 to be on the supported release/patch.

DO I need SFRAC for Oracle 10g RAC on Sun Solaris

My platform is SUN Solaris 10 64 bit on v490 server. On the backend side, we are using EMC CX500 storage. We will use Veritas File system and Veritas CFS.
I would like to ask, Do I must need SFRAC to configure Oracle 10g RAC or Can I just use only Oracle CRS. I do not want to use ASM.
Please advise
Thanks,
Sam..

The VCFS usually requires a Veritas Cluster, thus you would have to use the product combination that is bundled as SFRAC as mentioned before. Metalink in addition says:
10 10gR2 64-bit Veritas Storage Foundation for Oracle RAC 5.0 Certified
There is one exception to this rule: Linux.
Veritas and Oracle support a standalone version of the Veritas Cluster Files System (and only this component) on Linux. This does not hold true for Solaris.
Concluding, if you want to use the VCFS you would need to get a VCS, which then basically means using SFRAC.
However, in this case, as mentioned before, you would not need ASM.

Can I use coldfusion 8 standard version in Sun / Solaris?

Hi,
I would like to know if I can use coldfusion 8 standard
version in Sun / Solaris
Thank you.

banguitainf wrote:
> Hi,
>
> I would like to know if I can use coldfusion 8 standard
version in Sun / Solaris
No.
http://www.adobe.com/products/coldfusion/systemreqs/#support_matrix
Mack

Now I am using Windows Xp Labview program now i want control the Sun Solaris OS Board.Is it Possible in Windows XP Labview?

Now I am using Windows Xp Labview program now i want control the Sun Solaris OS Board.Is it Possible in Windows XP Labview?

You better should post your question in the LabVIEW forum - this one here is dedicated to LabWindows/CVI...

Installation problem sun solaris 9 x86 on intel

I am trying to install sun solaris 9 x86 intel platform edition on my home pc hp e-vectra, configuration is PIII 800 Mhz, 10 GB HDD, 128 MB Ram, 17" color monitor, but it giving me following error :-
BooT Panic: trap type e, error 0 at 117499
Cr0: 800000011, cr1: 4, cr3: 17e000
Eax: 0, ebx: 7e2c, ecx: 0 edx: 16e350
Es: fffffffe, edi: 17dfe0, ebp: 7e40, esp: 7e20
Entering boot debugger:
Please help me, how can I install sun solaris 9 x86 on my HP E-Vectra PC.
Kalpesh Mehta

I had similar problems several months ago. I suspect this happens when host pc does not have floppy drive(or bios somehow misreports it) as it was in my case. Solaris 8 seems to work fine in the same environment, so I keep using it for now. Possible workaround might be to use DCA from Solaris 8: Installation of Sol9 started just fine after I entered Sol8 DCA and asked it to boot from Sol9 CD.
Hope this problem will be fixed in subsequent Sol9 releases.
Victor

Sun Solaris 10 installation problem on IBM ThinkPad R31Notebook

Hello,
I have tried to install Sun Solaris 10 on my IBM ThinkPad R31 notebook, but the system has problem at initial stage of loading the installation software from CD. Here is the message I see on the screen when the CD is loaded:
loading stage2 ....
GNU GRUB Version 0.95 (639K lower / 514880K upper memory"
Solaris
Solaris Serial Console ttya
Solaris Serial Console ttyb (for 1x50, v60x and v65x
SunOS Release 5.10 version Generic_118855-33 32-bit
Copyright 1983-2006 Sun Microsystems, Inc All Right reserved
Use is subject to license terms
Rebooting
Rebooting
Rebooting
Rebooting
Rebooting
Rebooting
Rebooting
Rebooting
I changed both memory and the hard drive but I still have the same problem. Can anyone please tell me what the problem might be or what remedial step I should take to install Solaris 10 on R31?
Thanks

Did you try install check CD before the installation?
I think that there might be two main reasons:
1. Your computer is not supported
2. Hard drive may need to be formated to FAT32 or UFS

Oracle 10g R2 installation on sun solaris 10 Sparc machine

Hi there,
I encountered the following problem during oracle 10g R2 installation on sun solaris 10 Sparc machine
Error encountered:
Using paramFile: /u01/Oracle/10gr2_db_sol/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
Passed
Checking Temp space: must be greater than 250 MB. Actual 2266 MB Passed
Checking swap space: must be greater than 500 MB. Actual 2335 MB Passed
Checking monitor: must be configured to display at least 256 colors Failed <<<<
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY variable is set.
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,at which time they will be rechecked.
Continue? (y/n) [n]
The following were the steps taken before encountering the above error
1. logged into a workstation
2. From its xterm terminal I logged to the oracle server via ssh oracle@ip
3. keyed in the following at the command prompt
DISPLAY=machine_name:0.0; export DISPLAY
4. executed the following from the command prompt
./runInstaller
Note: when executing the ./runInstaller, the preinstallation checking just hangs at Checking monitor: must be configured to display at least 256 colors. But the log file shows it failed during preinstallation checking as shown in Error encountered
Please help me with this problem.
Thank you
Ravindran Kanniah

It is because of UNIX shell. I also faced this error during installation.
First check your shell by the following command.
$ echo $SHELL
Then select the below.
For csh shell
$ setenv DISPLAY 192.168.1.128:0.0
$ export DISPLAY
For sh,ksh and bash
$ DISPLAY=192.168.1.128:0.0
$ export DISPLAY
After you do this check the value of DISPLAY variable.
$ echo $DISPLAY
If the DISPLAY variable is set then run ./runInstaller.
One advice: Keep a complete log of your terminal session. This will help you in future :)
-aijaz

Duplex print with Report 6i on SUN Solaris

Dear All,
I would like to know if it's possible to print in duplex mode using Report 6i on SUN Solaris. If yes! show me the way.Thanks for help.

Hi DG,
Thanks a lot for being patient with me.
Here is what df -k returned.
# df -k
Filesystem kbytes used avail capacity Mounted on
/dev/dsk/c0d1s0 1139022 711306 370765 66% /
/proc 0 0 0 0% /proc
fd 0 0 0 0% /dev/fd
mnttab 0 0 0 0% /etc/mnttab
swap 215536 4 215532 1% /var/run
swap 215848 316 215532 1% /tmp
/dev/dsk/c0d1s7 6404645 4938156 1402443 78% /export/home
# who
root console Jul 20 14:09 (:0)
root pts/4 Jul 20 14:10 (:0.0)
The foregoing list shows that I do not have sufficient disk space. Oracle Install documentation says I should have 3GB for a full install. My second hard disk should be able to handle this, but I do not know yet how I can add more disk space to the file system. Can you please tell me how I can do this?
Meanwhile I am deleting the 13 files 9iAS10220_part1 through 9iAS10220_part13 to free up some disk space. Having extracted files and created Disk1 through Disk5, I do not think I will need these 13 files anymore.
I am still trying to understand what runInstaller script is trying to do.
Roger
null

PCC-S-02014 error while compiling with in Sun Solaris

We are porting our application from HP-UX to Sun Solaris and as part of that I am trying the compile a Pro*C program in Sun Solaris using SUNWspro C++ compiler. Precompiling is failing with following error.
PRECOMP set: /u01/app/oracle/product/10.2.0/bin/proc dbms=native code=cpp mode=ansi include=/u01/app/oracle/product/10.2.0/precomp
ireclen=255 oreclen=255
define=__sparc define=__SUNPRO_C include=/usr/include include=. include=/u01/app/SUNWspro/prod/include/CC/stlport4 include=/u01/app/oracle/product/10.2.0/rdbms/public/ include=/u01/app/oracle/product/10.2.0/network/public/ include=/u01/app/oracle/product/10.2.0/rdbms/demo/ errors=yes select_error=no
sqlcheck=limited ltype=NONE
release_cursor=no hold_cursor=no
Pro*C/C++: Release 10.2.0.3.0 - Production on Thu Dec 18 03:09:59 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
System default option values taken from: /u01/app/oracle/product/10.2.0/precomp/admin/pcscfg.cfg
Syntax error at line 44, column 30, file /u01/app/SUNWspro/prod/include/CC/stlport4/algorithm:
Error at line 44, column 30 in file /u01/app/SUNWspro/prod/include/CC/stlport4/a
lgorithm
# include STLPNATIVE_HEADER(algorithm)
.............................1
PCC-S-02014, Encountered the symbol "(" when expecting one of the following:
: [ ] + / . .. an identifier, a numeric constant, newline,
define, elif, else, endif, error, if, ifdef, ifndef, include,
line, pragma, undef, exec, sql, begin, end, var, type,
oracle, an immediate preprocessor command, a C token, create,
function, package, procedure, trigger, or, replace,
Normal C++ files are getting compiled with out eny issues. This particular file is having functions written in C fashion. Any idea what is missing in the compiler option.
regards
Vinu

Hi Vinu,
I'm not sure if this is still an issue for you. When I have encountered issues like this with Pro*C I have ended up specifying parse=none to the proc command and then putting all declarations between "EXEC SQL BEGIN DECLARE SECTION" and "EXEC SQL END DECLARE SECTION" markers. I have also moved any "special" declarations into a specific header file and then placed the "#include <special header file>" inside the declare section as well.
Perhaps that will help a bit,
Regards,
Mark

BPEL Server installation on JBOSS application Server on SUN SOLARIS

I have a question about Oracle BPEL installation. For our project exists the requirement, to install BPEL Server on SUN SOLARIS, whereby the appropriate Version of Application server JBOSS already exists and it should be used.
The version of the Oracle BPEL server for JBOSS, which we found on the Download side, is made available only with JBOSS (version 3.2.6) in a Package.
During the BPEL server installation this bound JBOSS server version is installed automatically, without giving selection. Is there a BPEL installation for JBOSS on SUN-SOLARIS, which can be installed at the already existing JBOSS server?

Hi There,
Dis you get any good responces to your question ?
Thanks
[email protected]

Front end of PL/SQL for Sun solaris

Hi,
What are the popular front ends and also Which is best front end of PL/SQL under
UNIX (Sun Solaris) platform.

You can use Sql Navigator from Qwest Software
which can run on Win95/NT/2000. You can use SQL*NET to connect to your Sun Solaris or any other Oracle instance running on UNIX platform.
Jack
null

Unable to connect Informatica on Sun Solaris to a SQL Server datasource

Background*
We have a fully operational OBIEE with OBIA Apps infrastructure running with Informatica PC8.6 ETL suite. Informatica services are running on a Sun Solaris 64 bit platform.
We currently extract data from two Oracle EBS 11.5.10 sources. Now we are trying to extract data from a new MS SQL Server 2000 source into the OBAW.
Problem*
I'm trying the use the native ODBC 5.2 Data Direct driver to connect the the data source.
I've gone through and completed the 9 steps of the 'Connecting to an ODBC Data Source' chapter in Informatica on our Solaris Unix box.
I've made the following changes to the *.profile*
# ODBC HOME
ODBC_HOME=/oracle/Informatica/PowerCenter8.6.0/ODBC5.2
export ODBC_HOME
ODBC_INI=/oracle/Informatica/PowerCenter8.6.0/ODBC5.2/odbc.ini
export ODBC_INI
PATH=${PATH}:$ODBC_HOME/bin
export PATH
LD_LIBRARY_PATH=${LD_LIBRARY_PATH}:$ODBCHOME/lib
export LD_LIBRARY_PATH
I've also made changes to the odbc.ini file as suggested:
[MSS_DB]
Driver=/oracle/Informatica/PowerCenter8.6.0/ODBC5.2/lib/DWmsss22.so
Description=DataDirect 5.2 SQL Server Wire Protocol
Address=MssServer.xxx.co.uk,1433
AlternateServers=
AnsiNPW=Yes
ConnectionRetryCount=0
ConnectionRetryDelay=3
Database=MIS_Report_DB
LoadBalancing=0
LogonID=myuser
Password=mypwd
QuotedId=No
ReportCodePageConversionErrors=0
InstallDir=/oracle/Informatica/PowerCenter8.6.0/ODBC5.2
I've created the Connection--> Relational --> ODBC connection on Workflow Manager
I've specified the username/pwd and connect string MssServer.xxx.co.uk@MIS_Report_DB. I've called it exactly the same as MSS_DB specified in the odbc.ini
When I run the workflow. It fails but doesn't throw up any error/error code in the session log. The last 3 lines of the Session Log below and then it just bombs out within 5 secs.
PETL_24006 : Starting data movement.
TM_6660 : Total Buffer Pool size is 4234808 bytes and Block size is 468312 bytes.
DBG_21438 : Reader: Source is [MssServer.xxx.co.uk], user [myuser]
If you ping from the Unix server it says 'MssServer.xxx.co.uk is alive'
Can anyone suggest what we need to do different or spot something obvious?
Edited by: bebedi123 on 13-Apr-2010 09:43

user00726 wrote:
i am able to create files in /tmp
$ pwd
/tmp
$ touch test
$ ls -l
total 64
drwxr-xr-x   2 root     other        194 May 27 14:20 OraInstall2009-05-27_02-20
-02PM
drwxr-xr-x   2 root     other        194 May 27 14:35 OraInstall2009-05-27_02-35
-06PM
drwxr-xr-x   6 root     other        445 May 27 14:38 OraInstall2009-05-27_02-38
-48PM
-rw-rw-r--   1 root     sys         6644 May 27 14:00 ps_data
-rw-r--r--   1 oracle   dba            0 May 27 16:04 test
$and i have also removed /tmp_dir_n8ai9b files
but still there is a problemYou have root as owner of subdirectories (e.g. OraInstall2009-05-27_02-38-48PM) and not oracle:
- do you install as root now?
- or make the directories writable for oracle, too.The write flag is missing (something like chmod -R a+w OraInstall2009-05-27_02-38-48PM)
Edited by: TanteKaethe on May 28, 2009 9:54 AM

RAC using QFS on Sun Solaris 10

Similar Messages

Maybe you are looking for