RAC utility kit

Hi ,
you sent me mail to download the RAC utilit kit and when i stert the process and entering my user name and password the next page is failed with message SURVEY ERROR.
how can i get the RAC utility kit?
Regards.

Similar Messages

Oracle RAC utilizing 10g Standard Edition

Hi all,
is it possible to implement cluster utilizing Oracle 10g Standard Edition on windows 2003 platform?
Thanks

Hi,
Yes, you can setup RAC on Oracle 10g Standard Edition with no aditional cost.
This document may helps u http://www.jobcestbon.com/oracle/RacOnWindows.pdf
Regards,
Rodrigo Mufalani
http://mufalani.blogspot.com

How to install 11gR2 RAC on 64 bit linux OS

I am completely new to this topic of RAC and need to be installing and standing up RAC on Linux 64 bit OS . I have good knowledge of installing oracle database ENTERPRISE version 11gR2.
Can you guide me as to how to start. I am looking for leads. Probably we will have 2 nodes.
Thank you very much for helping me in advance

If you are a My Oracle Support (Metalink) user, go check out these two notes created by the Oracle RAC Assurance Team. They are excellent.
NOTE: 810394.1 RAC Assurance Support Team: RAC Starter Kit and Best Practices (Generic)
NOTE: 811306.1 RAC Assurance Support Team: RAC Starter Kit (Linux)
In the Linux note mentioned above there is a link to a Linux Step by Step Instruction Guide. This step by step instruction guide is the best start to finish document I've seen for how to set-up and install Oracle RAC. I believe the guide is written for installing release 11.2.0.2.

RAC installation error

Hi!
Can anyone help me with this one?
I have trying to installa RAC 10g R2 in Windows Server 2008 R2. I am encountering the error below:
OUI-35073: Exception occured while starting service in the remote nodes. Could not start the service 'OracleClusterVolumeService' in the remote cluster
nodes. The specified service does not exist as an installed service

Hi,
same as your other posts. Please have a look at the documentation and search for the RAC Starter Kits in support.oracle.com.
I believe you have a general setup problem in your environment.
Please post some more information, than just the error. Otherwise it is hard to help you.
Regards
Sebastian

RAC Installation on AIX 5.3 oracle(10.2.0.4.0)

Hi,
I am planning to setup RAC on AIX 5.3 in oracle 10.2.0.4.0
Please provide me any document for step by step installation of RAC on AIX 5.3 in oracle 10.2.0.4.0.
If possible provide me metalink document ID.
Thanks

Hi user;
Please check below notes and links:
IBM General Parallel File System (GPFS) and Oracle RAC [ID 302806.1]
RAC Assurance Support Team: RAC Starter Kit and Best Practices (AIX) [ID 811293.1]
RAC: Frequently Asked Questions [ID 220970.1]
I also suggest check below googling which has very great notes:
http://www.google.com.tr/search?hl=tr&source=hp&q=RAC+on+AIX&aq=f&aqi=&aql=&oq=&gs_rfai=
Regard
Helios

NIC ROUTER requirement for 10g RAC database

I need to know what hardware to order in setting up an 10g RAC database without a single-point-of-failure. My question centers on the networks. If each server has one NIC for the public interface and one NIC for the private interconnect, aren't the routers these NICs are attached to a single point of failure? If each server has two NICs bonded together for the public interface and two NICs bonded together for the private interconnect, does each NIC attach to a different router?

sayantan chakraborty wrote:
is RDMA and infiband ar same??Infiniband is a switched fabric layer for high speed communication. RDMA is a protocol for "+remote direct memory access+".
Infiniband supports the Internet Protocol suite over Infiniband, or IPoIB. It also supports RDMA over Infiniband.
so do we need only infiband SDR / QDR switch to set infiband OR what else??You need an Infiniband switch - Cisco and Voltaire are two companies that supply this type of hardware. The latter is used by Oracle in its Exadata database machines. Unsure about Cisco's commitment to Infiniband switches as they have discontinued their Infiniband switches with integrated fibre channel gateways. A sore point with us after we bought into this technology about 2 years ago, in part on their very own recommendations - and now own very expensive, somewhat buggy and totally unsupported hardware. Seems like the new Cisco California servers are GigE and not Infiniband, which perhaps explain this (flawed) decision of theirs...
For each cluster node, you need an Infiniband PCI card (typically has 2 ports). If you are going to use bonding, you will need a pair of Infiniband cables per server. Also remember to get spares - both PCI cards and cables.
If you want redundancy at the switch, you need to get yourself 2 Infiniband switches.
But if you're planning to invest this into a RAC cluster, then surely you should also invest money in RAC licensing and support - and with that gain access to very useful documentation like the RAC Starter Kit and so on.

Oracle RAC 11g R2 on AIX

Hello All,
I am new to RAC installations. I want to install Oracle RAC 11g R2 on an AIX server.
Please can you provide me a link with the detailed and easy steps to follow and install Oracle 11g R2 on AIX.
i am cheking the Oracle Installation guide, but it is not easy and it does not include the detailed steps; for ex what to add to the hosts file..
any more simple guide/link ?
Regards,

Hi,
I am new to RAC installations. I want to install Oracle RAC 11g R2 on an AIX server.
Please can you provide me a link with the detailed and easy steps to follow and install Oracle 11g R2 on AIX.
i am cheking the Oracle Installation guide, but it is not easy and it does not include the detailed steps; for ex what to add to the hosts file..
any more simple guide/link ?Pl Refer MOS tech notes:
*RAC Assurance Support Team: RAC Starter Kit and Best Practices (AIX) [ID 811293.1]*
*Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]*
*Master Note for Automatic Storage Management (ASM) [ID 1187723.1]*
*Can We Install 10gr2/11gr2 on AIX 64-bit OS When Running in 32bit Kernel Mode [ID 956449.1]*
*Master Note for Real Application Clusters (RAC) Oracle Clusterware and Oracle Grid Infrastructure [ID 1096952.1]*
Also refer:
http://download.oracle.com/docs/cd/E11882_01/rac.112/e16795/toc.htm
http://download.oracle.com/docs/cd/E11882_01/install.112/e17214/toc.htm
http://www-03.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/WP101176
Re: 11gR2 RAC installation in AIX help urgent...!!!!
Hope helps :)
thanks,
X A H E E R

Best practice of 11G release 2 Grid & RAC installation on Solaris 10

Hi Experts,
Please share 11g Release 2 Grid infrastructure and RAC installation experiennce on Sun SPARC.
Appreciate if you can provide documentation which provde complete information from server setup to database setup(other than oracle documentaion)
Also please let me know which is the best storage option( NFS , ASM,...) and pros and cons
Regards,
Rasin M

Hi,
Appreciate if you can provide documentation which provde complete information from server setup to database setup(other than oracle documentaion)Check this in MOS:
RAC Assurance Support Team: RAC Starter Kit and Best Practices (Solaris)
https://support.oracle.com/CSP/main/article?cmd=show&id=811280.1&type=NOT
Regards,
Levi Pereira
http://levipereira.wordpress.com

Oracle RAC 10.2.0.4 installation error in windows 2008 R2

Hi!
below is the error i got;
INFO: Command = C:\Windows\system32\cmd /c call C:\oracle\product\10.2.0\crs/install/crssetup.config.bat
Step 1: checking status of CRS cluster
Step 2: creating directories (C:\oracle\product\10.2.0\crs)
Step 3: configuring OCR repository
ocr upgrade failed with (-1)
Execution of the plugin was aborted
INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" was canceled.

Hi,
this is not enough information to help you with this problem.
=> Have you checked any necessary prerequisites (Documentation and RAC Starter Kit in support.oracle.com)
=> Do you use OCFS or RAW devices for OCR?
=> Do you use an english Windows version or another language?
=> What is included in the clusterware logs?
etc...
Regards
Sebastian

Best practice for installation oracle 11g rac on windows 2008 server x64

hello!
can somebody tell me a good book or an other kind of literature regarding "best practice for installation oracle 11g rac on windows 2008 server x64"? thx in advance!
best regards,
christian

Hi Christian,
Check this on MOS
*RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows) [ID 811271.1]*
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=811271.1
DOC Modified: 14-DEC-2010
Regards,
Levi Pereira

Shared Storage allocation for Oracle 10g RAC

Hi,
I am about to implement a Two Node Oracle 10g RAC on Windows 2008 (32-Bit) servers. We are going to use EVA4400 storeage and we have 600 GB for Oracle RAC and database.
I intend to follow the steps given in RACGuides_Rac10gR2OnWindows.pdf mentioned in Note 811271.1 (RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows)).
I would like to know how should I allocated the storage for OCR,Vote, Database and Flash Recovery Area. Meaning how many LUNs and of what size to be created and presented to both the servers. To start with I need to create a 25 GB database. We will be using Raw Device for OCR and Vote and ASM for Database and Flash Recovery Area.
Please advice.
Thanks,
Thiru

I am about to implement a Two Node Oracle 10g RAC on Windows 2008 (32-Bit) servers. Oracle 10g on Windows 2008 is not supported. Anyway installing a cluster as of today i would use a 64-bit operating system together with a 64-bit database. Everything else is not state-of-the-art anymore.
As of today i would go with 11g Release 1 (11.1.0.7.0) plus latest patches for Clusterware and ASM. Because you are using Windows 2008 you must use 11g Release 1 for the database as well. Bear in mind that Windows 2008 R2 is at this point in time not supported for 11g R1 or 11g R2 either.
I would like to know how should I allocated the storage for OCR,Vote, Database and Flash Recovery Area. Meaning how many LUNs and of what size to be created and presented to both the servers. This is said in the installation documents. Rule of thumb: At least three LUNs of 2 GB for OCR and three LUNs of 2 GB for Voting disk.
To start with I need to create a 25 GB database. We will be using Raw Device for OCR and Vote and ASM for Database and Flash Recovery Area.According to Oracles recommendations: Two disk groups: one for database files, the other for the flashback area.
But your setup may be different (more disk groups,....)
Ronny Egner
My blog: http://ronnyegner.wordpress.com

11g R2 - 2 node RAC on Windows X64 2003 Server

hi
we are soon going to start building a 2 node 11g R2 RAC on Windows X64 2003 server
questions
1. In 11g R2, is creating 2 disk group DATA and FRA still considered the best practice?
2. On which disk group should we place the OCR and Voting Disk
3. If there are issues placing OCR and Voting Disk on ASM (there definitely appears to be some concerns / reported issues on this), is using OCFS2 still a viable option?
4. Can someone point us to a document such as step by step installation of 11g R2 RAC on Windows with ASM or best practices 11g R2 RAC on Windows?
thanks

A bit late maybe, but you can check Note 811271.1 - RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows).
Edited by: olmartins on Jun 2, 2010 11:53 AM

Oracle10g rac installation steps in windows2008R2

Hello All ,
Grettings....
Is it possible to have oracle10g RAC in windows2008R2?
can i have the steps to install Oracle10g RAC in windows2008R2...
Thanks,
Edited by: user4487322 on Mar 30, 2011 2:53 AM

Hi,
a.) RTFM: otn.oracle.com/documentation
b.) RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows) (Doc ID 811271.1)
https://support.oracle.com/oip/faces/secure/km/DocumentDisplay.jspx?id=811271.1
Regards
Sebastian

Upgrade database for RAC

I have 11g standard edition database installed without RAC in a server environment. But, now I have needed to keep this database in RAC. Could I install or upgrade database with RAC environment without re-installation of oracle software/database from the scratch?

depends
you can relink the database home with RAC option on Linux/UNIX platforms: RAC Survival Kit: Rac On / Rac Off - Relinking the RAC Option [ID 211177.1]
but not on Windows
if you already have grid infrastructure (clusterware) configured as Oracle Restart, you can convert it to cluster configuration:
http://docs.oracle.com/cd/E11882_01/install.112/e22489/rem_orcl.htm#CBHEEJAA
otherwise you will have to install it (this can be higher version than your database home)

RAC management utilities

srvctl
srvconfig
EM
crs_ctl
gsdctl
what other utilities we can use to manage RAC DBs, any body has some notes for RAC Utilies?

If you go to http://forums.oracle.com you may note a 'topic' titled 'Grid Computing with a number of RAC related forums. You may ALSO get relevant answers to your RAC question by asking people who are heavily interested in RAC.
In the mean time - your list misses SQLPLUS and RMAN to name a few.

RAC utility kit

Similar Messages

Maybe you are looking for