Racgons Failed

I am trying to install 10g Clusterware on cent O.S(4.8), 2 vitural servers and the host operating system being Windows 7 Ultimate . After the initial configuration of the operating system/packages etc..,I have configured 2 NIC's eth0- Public & Vip(which i keep it inactive) eth1- Interconnect, on both the nodes. I successfully run cluvfy and get no errors (Except for VIP). The installer runs fine, ./vipca runs fine too, but when completeing the installation, it tells me that there are a few pre-requisites which are failed.
When i look at the logs, I see that the below steps have failed.
u01/crs/oracle/product/10.2.0/crs/bin/racgons add_config rac1.localdomain:6200 rac2.localdomain:6200
/u01/crs/oracle/product/10.2.0/crs/bin/oifcfg setif -global eth0/192.168.1.0:public eth1/192.168.2.0:cluster_interconnect
/u01/crs/oracle/product/10.2.0/crs/bin/cluvfy stage -post crsinst -n rac1,rac2
Also, I cleaned up the install and tried to reinstall it agian, by running vipca or both the nodes as well as for each node once at a time. Also tried to clean up the OCR/VOting disk entries.
Tried googling it but there is no perfect solution for it, all i see is how to clean up the installation, but no one has posted a fix for it. I would highly appreciate if someone could shed some light on it.
Thanks,
Ab

Hi deyz;
I belive you can have more quick response on Forum Home » Grid Computing » RAC, ASM & Clusterware Installation, i suıggest move your issue to this forum part
Regard
Helios

Similar Messages

10g RAC installation fails....

Hello All,
I am new to RAC installation.while doing the installation in 2node cluster,till the configuration assisstants windows everything went fine. in CA while checking the status,the oracle clusterware config assistant failed with the following log....
INFO: Starting Install on nodes 'server004'
INFO: Saving Cluster Inventory
INFO: Running command 'C:\DOCUME~1\uit0076\LOCALS~1\Temp\1\OraInstall2010-05-18_11-41-42AM\oui\bin\setup.exe -jreLoc C:\DOCUME~1\uit0076\LOCALS~1\Temp\1\OraInstall2010-05-18_11-41-42AM\jre\1.4.2 -paramFile C:\DOCUME~1\uit0076\LOCALS~1\Temp\1\OraInstall2010-05-18_11-41-42AM\oui/clusterparam.ini -silent -ignoreSysPrereqs -attachHome -noClusterEnabled ORACLE_HOME=C:\oracle\product\10.2.0\crs ORACLE_HOME_NAME=OraCr10g_home CLUSTER_NODES=server003,server004 CRS=true "INVENTORY_LOCATION=C:\Program Files\Oracle\Inventory" LOCAL_NODE=server004 -remoteInvocation -invokingNodeName server003 -logFilePath "C:\Program Files\Oracle\Inventory/logs" -timestamp 2010-05-18_11-41-42AM' on the nodes 'server004'.
INFO: Deleting service 'OracleOUIOraCr10g_homeService' on nodes 'server004'.
INFO: Creating service 'OracleOUIOraCr10g_homeService' on nodes 'server004'.
INFO: Starting service 'OracleOUIOraCr10g_homeService' on nodes 'server004'.
INFO: Stopping service OracleOUIOraCr10g_homeService on nodes server004.
INFO: Deleting service 'OracleOUIOraCr10g_homeService' on nodes 'server004'.
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: cf session retrieved for key: OraCr10g_home oracle.crs
INFO: RUN_RECOMMENDED_TOOLS FIRST is set to false
INFO: No of Recommended Tools5
INFO: plugin-list is created
INFO: pluginlist is updated for: Oracle Clusterware current size: 1
INFO: No of ExitOnly Tools in this session: 0
INFO: cf session for perform has hashcode: 1040982
INFO: detached tool list getting prepared fo comp: Oracle Clusterware
INFO: cfsession hashcode for exit only tools: 1040982
INFO: hashcode for action: 17596838
INFO: No of ExitOnly Tools: 0
INFO: saving exit only tools ...
INFO: no detached only tools in this session
INFO: exit-only tools are created in single installation
INFO: no. of sets of tools to be run: 1
INFO: ca page to be shown: true
INFO: exitonly tools to be excuted passed: 0
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/install/crssetup.config.bat
Step 1: checking status of CRS cluster
Step 2: creating directories (C:\oracle\product\10.2.0\crs)
Step 3: configuring OCR repository
ocr upgrade failed with (-1073741819)
Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/install/crssetup.config.bat has failed
INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\crs
Configuration directory is set to C:\oracle\product\10.2.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
Have 1GB RAM in both the nodes.
could any one help me to solve this?
Thanks,
Derick
Edited by: user4487322 on May 18, 2010 1:46 AM

Thank you madrid.I am installing the RAC in windows2003 sp2 server.in the link till the step no#12(12. The Configuration Assistants page appears.)everything went
fine.while checking the 'Virtual Private IP Configuration Assistant',the installation fails with following error.....
INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" succeeded
INFO: Command = C:\oracle\product\10.2.0\crs/bin/racgons.exe add_config server003:6200 server004:6200
INFO: Configuration assistant "Oracle Notification Server Configuration Assistant" succeeded
INFO: Command = C:\oracle\product\10.2.0\crs/bin/oifcfg.exe setif -global "Local Area Connection"/10.28.25.0:public "Local Area Connection 2"/10.10.10.0:cluster_interconnect
INFO: Configuration assistant "Oracle Private Interconnect Configuration Assistant" succeeded
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/bin/vipca.bat -silent -nodelist "server003,server004" -nodevips "server003/vipserver003/255.255.255.0/Local Area Connection,server004/vipserver004/255.255.255.0/Local Area Connection"
Execution of the plugin was aborted
INFO: Configuration assistant "Virtual Private IP Configuration Assistant" was canceled.
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\crs
Configuration directory is set to C:\oracle\product\10.2.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/bin/vipca.bat -silent -nodelist "server003,server004" -nodevips "server003/vipserver003/255.255.255.0/Local Area Connection,server004/vipserver004/255.255.255.0/Local Area Connection"
Execution of the plugin was aborted
INFO: Configuration assistant "Virtual Private IP Configuration Assistant" was canceled.
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/bin/vipca.bat -silent -nodelist "server003,server004" -nodevips "server003/vipserver003/255.255.255.0/Local Area Connection,server004/vipserver004/255.255.255.0/Local Area Connection"
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\crs
Configuration directory is set to C:\oracle\product\10.2.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
I am able tp ping all my IP's from both the nodes,with host name &alias specified in the host file.
any thing else to be checked to fix "Virtual Private IP Configuration Assistant"?Any help?

Is RAC node configuration when disk array fails on one node .

Hi ,
We recently had all the filesystem of node 1 of RAC cluster , turned into read only mode. Upon further investigation it was revealed that it was due to disks array failure on node 1 . The database instance on node 2 is up and running fine . The OS team are rebuilding the node 1 from scratch and will restore oracle installable from the backup .
My question is once all files are restored :
Do we need to add the node to the RAC configuration ?
Do we need to do relink of oracle binary files ?
Can the node be brought up directly once all the oracle installables are restored properly or will the oRacle team require to perform addition steps to bring the node into RAC configuration .Thanks,
Sachin K

Hi ,
If the restore fails in some way . We will require to first remove and then add the nodes to the node 1 cluster right ? Kindly confirm on the below steps.
In case of such situation below are the steps we plan to follow:
version ; 10.2.0.5
Affected node :prd_node1
Affected instance :PRDB1
Surviving Node :prd_node2
Surviving instance: PRDB2
DB Listener on prd_node1:LISTENER_PRD01
ASM listener on prd_node1:LISTENER_PRDASM01
DB Listener on prd_node2:LISTENER_PRD02
ASM listener on prd_node2:LISTENER_PRDASM02
Login to the surviving node .In our case its prd_node2
Step 1 - Remove ONS information :
Execute as root the following command to find out the remote port number to be used
$cat $CRS_HOME/opmn/conf/ons.config
and remove the information pertaining the node to be deleted using
#$CRS_HOME/bin/racgons remove_config prd_node1:6200
Step 2 - Remove resources :
In this step, the resources that were defined on this node has to be removed. These resources include (a) Database (b) Instance (c) ASM. A list of this can
be acquired by running crs_stat -t command from any node
The srvctl remove listener command used below is only applicable in 10204 and higher releases including 11.1.0.6. The command will report an error if the
clusterware version is less than 10204. If clusterware version is less than 10204, use netca to remove the listener
srvctl remove listener -n prd_node1 -l LISTENER_PRD01
srvctl remove listener -n prd_node1 -l LISTENER_PRDASM01
srvctl remove instance -d PRDB -i PRDB1
srvctl remove asm -n prd_node1 -i +ASM1
Step 3 Execute rootdeletenode.sh :
From the node that you are not deleting execute as root the following command which will help find out the node number of the node that you want to delete
#$CRS_HOME/bin/olsnodes -n
this number can be passed to the rootdeletenode.sh command which is to be executed as root from any node which is going to remain in the cluster.
#$CRS_HOME/install/rootdeletenode.sh prd_node1,1
Step 5 Update the Inventory :
From the node which is going to remain in the cluster run the following command as owner of the CRS_HOME. The argument to be passed to the CLUSTER_NODES is a
comma seperated list of node names of the cluster which are going to remain in the cluster. This step needs to be performed from once per home (Clusterware,
ASM and RDBMS homes).
## Example of running runInstaller to update inventory in Clusterware home
$CRS_HOME/oui/bin/runInstaller -updateNodeList ORACLE_HOME=$ORA_CRS_HOME "CLUSTER_NODES=prd_node2" CRS=TRUE
## Optionally enclose the host names with {}
## Example of running runInstaller to update inventory in ASM home
$CRS_HOME/oui/bin/runInstaller -updateNodeList ORACLE_HOME=$ASM_HOME "CLUSTER_NODES=prd_node2"
## Optionally enclose the host names with {}
## Example of running runInstaller to update inventory in RDBMS home
$CRS_HOME/oui/bin/runInstaller -updateNodeList ORACLE_HOME=$ORACLE_HOME "CLUSTER_NODES=prd_node2"
## Optionally enclose the host names with {}
We need steps to add the node back into the cluster . Can anyone please help us on this ?
Thanks,
Sachin K

OUI-25031 Cluster Configuration Assistant Fails Windows 2003 server RAC

Hi All
I am installing RAC on Windows 2003 Server X64, Dell PowerEdge 2950 Servers with iSCSI Storage.
I have 3 Network cards on each node which are configured like this
# Public
10.2.0.8 USTISDB-1.USTIS.Brgpoint.com USTISDB-1 --- in DNS
10.2.0.9 USTISDB-2.USTIS.Brgpoint.com USTISDB-2
#Virtual
10.2.0.10 USTISDB-1-vip.USTIS.Brgpoint.com USTISDB-1-vip --- in DNS
10.2.0.11 USTISDB-2-vip.USTIS.Brgpoint.com USTISDB-2-vip
#Private
192.168.2.2 USTISDB-1-priv.USTIS.Brgpoint.com USTISDB-1-priv --- in Hosts file
192.168.2.3 USTISDB-2-priv.USTIS.Brgpoint.com USTISDB-2-priv
#iSCSI Storage
192.168.1.2 Storage --- in DNS
Everything Pings everything.
When I start the installation , it installs clusterware and completes the remote operations but fails at cluster configuration window.
After checking the logs I found the list of failed commands and it says
INFO: Command = C:\WINDOWS\system32\cmd /c call E:\oracle\product\10.2.0\crs/install/crssetup.config.bat
PROT-1: Failed to initialize ocrconfig
Step 1: checking status of CRS cluster
Step 2: creating directories (E:\oracle\product\10.2.0\crs)
Step 3: configuring OCR repository
ocr upgrade failed with (-1)
Execution of the plugin was aborted
INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" was canceled.
and then I checked E:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands and i says
rem Copyright (c) 1999, 2005, Oracle. All rights reserved.
C:\WINDOWS\system32\cmd /c call E:\oracle\product\10.2.0\crs/install/crssetup.config.bat
E:\oracle\product\10.2.0\crs/bin/racgons.exe add_config USTISDB-1.USTIS.Brgpoint.com:6200 USTISDB-2.USTIS.Brgpoint.com:6200
E:\oracle\product\10.2.0\crs/bin/oifcfg.exe setif -global "public"/10.0.0.0:public "private"/192.168.2.0:cluster_interconnect
C:\WINDOWS\system32\cmd /c call E:\oracle\product\10.2.0\crs/bin/vipca.bat -silent -nodelist "USTISDB-1,USTISDB-2" -nodevips "USTISDB-1//255.0.0.0/public,USTISDB-2//255.0.0.0/public"
C:\WINDOWS\system32\cmd /c call E:\oracle\product\10.2.0\crs/bin/cluvfy.bat stage -post crsinst -n "USTISDB-1,USTISDB-2"
Please help, Any help will be highly appreciated.
Edited by: user651560 on Nov 13, 2008 3:24 PM

E:\Staging\102010_win64_x64_clusterware\clusterware\cluvfy>runcluvfy stage -pre crsinst -n ustisdb-1,ustisdb-2 -verbose
The system cannot find the file specified.
Performing pre-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "USTISDB-1"
Destination Node Reachable?
ustisdb-1 yes
ustisdb-2 yes
Result: Node reachability check passed from node "USTISDB-1".
Checking user equivalence...
Check: User equivalence for user "Administrator"
Node Name Comment
ustisdb-2 passed
ustisdb-1 passed
Result: User equivalence check passed for user "Administrator".
Checking administrative privileges...
Checking node connectivity...
Interface information for node "ustisdb-2"
Interface Name IP Address Subnet
public 10.2.0.9 10.0.0.0
private 192.168.2.3 192.168.2.0
san 192.168.1.6 192.168.1.0
Interface information for node "ustisdb-1"
Interface Name IP Address Subnet
public 10.2.0.8 10.0.0.0
private 192.168.2.2 192.168.2.0
san 192.168.1.5 192.168.1.0
Check: Node connectivity of subnet "10.0.0.0"
Source Destination Connected?
ustisdb-2:public ustisdb-1:public yes
Result: Node connectivity check passed for subnet "10.0.0.0" with node(s) ustisdb-2,ustisdb-1.
Check: Node connectivity of subnet "192.168.2.0"
Source Destination Connected?
ustisdb-2:private ustisdb-1:private yes
Result: Node connectivity check passed for subnet "192.168.2.0" with node(s) ustisdb-2,ustisdb-1.
Check: Node connectivity of subnet "192.168.1.0"
Source Destination Connected?
ustisdb-2:san ustisdb-1:san yes
Result: Node connectivity check passed for subnet "192.168.1.0" with node(s) ustisdb-2,ustisdb-1.
Suitable interfaces for the private interconnect on subnet "10.0.0.0":
ustisdb-2 public:10.2.0.9
ustisdb-1 public:10.2.0.8
Suitable interfaces for the private interconnect on subnet "192.168.2.0":
ustisdb-2 private:192.168.2.3
ustisdb-1 private:192.168.2.2
Suitable interfaces for the private interconnect on subnet "192.168.1.0":
ustisdb-2 san:192.168.1.6
ustisdb-1 san:192.168.1.5
ERROR:
Could not find a suitable set of interfaces for VIPs.
Result: Node connectivity check failed.
Checking system requirements for 'crs'...
Check: Operating system version
Node Name Available Required Comment
ustisdb-2 Windows Server 2003 Windows Server 2003 passed
ustisdb-1 Windows Server 2003 Windows Server 2003 passed
Result: Operating system version check passed.
Check: Total memory
Node Name Available Required Comment
ustisdb-2 15.99GB (16771724KB) 512MB (524288KB) passed
ustisdb-1 15.99GB (16771724KB) 512MB (524288KB) passed
Result: Total memory check passed.
Check: Swap space
Node Name Available Required Comment
ustisdb-2 17.4GB (18241648KB) 1GB (1048576KB) passed
ustisdb-1 17.4GB (18241648KB) 1GB (1048576KB) passed
Result: Swap space check passed.
Check: System architecture
Node Name Available Required Comment
ustisdb-2 64-bit 64-bit passed
ustisdb-1 64-bit 64-bit passed
Result: System architecture check passed.
Check: Free disk space in "C:\DOCUME~1\ADMINI~1.UST\LOCALS~1\Temp\1" dir
Node Name Available Required Comment
ustisdb-2 23.7GB (24848248KB) 400MB (409600KB) passed
ustisdb-1 23.65GB (24797157KB) 400MB (409600KB) passed
Result: Free disk space check passed.
System requirement passed for 'crs'
Pre-check for cluster services setup was unsuccessful on all the nodes.

Bit locker drive encryption failed due to power failer and hard disk corrupted

I ran Bitlocker drive ecryption drive D. My pc is windows 7 ultimate, while it was in progress of 1% due to power failer the encryption failed, when power resume the drive didn't showed the file format nor the size but it shows the size in disk management.
It showed like this in My computer
I do Have the recovery code password and back of recovery password so I ran the "manage-bde-_unlock D:-rp[my code ]
and my pc got hang no other option rather than to press the restart button.
then I used commang "repair-bde -force D:I:-rp[my rp] and following info showed but it stucked in 1% about 8 hours, and there was no increase in the pecentage
I also connected the hardisk to mac but all othe partation showed but didn't showed the encrypted one.
I had lots of memorable picture and other backups so any one kindly help me to get out of this problem. Thanks for help

Hi,
The BitLocker encryption and decryption processes can be interrupted by turning the computer off, and it will resume where it left off the next time Windows starts. This is true even if the power is suddenly unavailable.
Bitlocker-repair (repair-bde) tool
can't repair a drive that failed during the encryption or decryption process.
In addition, could you please explain a bit for what drive you are trying to deal with? external one?
When you first restart your PC, have you seen any signs that indicate that the encryption is in process?
Regarding your scenario, please take a look to see if the following articles could help here:
Scenario 11: Recovering Data Protected by BitLocker Drive Encryption (Windows 7)
Besides, when running manage-bde command, did we followed the steps mentioned in the below article?
Scenario 14: Using a Data Recovery Agent to Recover BitLocker-Protected Drives (Windows 7)
Best regards
Michael Shao
TechNet Community Support

Cannot send email from my Touch (connection to smtp server fails)

Hello,
I have a new iPod Touch with 1.1.4 and the January apps. I am having a problem setting the Mail application.
I am trying to connect to the IMAP/SMTP servers at my university. I am using the exact same settings and passwords I use on my laptop, which works fine. I can receive email fine on my Touch, but every time I try to send one it fails tellings me "the connection to the outgoing server smtp.myuniversity.edu failed".
If I on purpose write a wrong password for the outgoing mail, the error message I get is different ("check the account settings for the outgoing server smtp.myuniversity.edu").
The university IT people confirmed my settings, and told me that there is nothing blocking any handheld device from using the server.
Does anyone know why this would happen?
Thanks,
Marcelo

Thank you very much for your responses
1) the link to mail setup is (sorry, it's quite long)
http://www.knowledgepak.com/kpaksonline/kpol.asp?PiAlias=kpolpi17&k2dockey=04096 3251575739@kpol17&ViewLink=true&SkipHeader=false&printformat=true
2) I am indeed using SSL, as instructed by IT
3) I do use port 587 instead of 25 (25 does not work either)
Any ideas? Thanks again.
MC

BSI ConnectToDataSet...failed

Hi
We have a problem with the BSI, we had been getting a dump "RFC_ERROR_SYSTEM_FAILURE", I followed the SAP Note 1068271 for the debug, and the result is:
=Thu Jan 22 11:53:37 2009
=SAP AG, Walldorf - Business API for BSI TaxFactory 8.0
=RfcAccept called
=Mapping ABAP RFC_PAYROLL_TAX_CALC_US_80 to C function srv_Payroll_Tax_Calc_US_80
=Mapping ABAP RFC_HR_TAXLOCATOR_US_80 to C function srv_hr_taxlocator_us_80
=Waiting for ABAP function calls
=Running function srv_Payroll_Tax_Calc_US_80
=Loading import parameters
=Loading export parameters
=Loading internal tables
=Calling Payroll_Tax_Calc_US
=Running Connect_DB_Payroll_Tax_Calc_US
BSI dataset -> 110
ConnectToDataSource...Succeeded
ConnectToDataSet...failed
Error String -> 7777 - [Oracle][ODBC][Ora]ORA-00933: SQL command not properly ended
=RFC error
operation/code Connect_DB_Payroll_Tax_Calc_US
key RFC_ERROR_SYSTEM_FAILURE
status
message See RFC trace file or SAP system log for more details
internal status
The RFC under sm59 is working fine, the error is on the connection to the Dataset according to the Debug log "ConnectToDataSet...failed".
I don't know what to check about the Dataset, could you please help me?
Best Regards

Yes, it's correct.
I checked it's 8.0.
I think is a problem with the parameters under tf80server.bat.
SET
TF80_CONNECT_STRING=DSN=;UID=;PW
D=;
SET TF80_SCHEMA_NAME=.TF80
REM for SAP trace debugging, uncomment below & see file
errors.txt in gateway working directory
REM C:\BSI\TAXFACTORY\tf80serverdebug.exe %*
REM else for usual operation
C:\BSI\TAXFACTORY\tf80server.exe %*
I don't know what is the "ODBC_DSN_NAME"
I have the user, password, the database name...
Best Regards

Installation of IPC AP 7.0 Jar is getting Failed when uploading in CRM

Hello Experts,
we did some changes in the previosly uploded version of IPC AP 7.0 customer user exit Jar file in eclipse.
While uploading the new modified jar through transaction /SAPCND/UE_DEV in CRM we are getting error :" installation of module <Jar file name > has failed ".
when we checked the logs in SM 53 we seen the below mentioned error:
Message: Exception of type com.sap.sql.log.OpenSQLException caught: Exception of type com.sap.sql.sqlparser.CommonSQLParserException: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE ^ (reason: Modification of ABAP tables is not permit ted)" is not supported
caught: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE ^ (reason: Modification of ABAP tables is not permitted)" is not supported
--> com.sap.sql.log.OpenSQLException: Exception of type com.sap.sql.sqlparser.CommonSQLParserException: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE '^' (reason: Modification of ABAP tables is n" is not suppor ted
caught: - statement "DELETE FROM "SVMCRT_MOD_TR_T" WHERE "MODULE_NAME" LIKE ? ESCAPE '^' (reason: Modification of ABAP tables is not permitted)" is not supported
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Ljava/lang/Class;Ljava/lang/String;[Ljava/lang/Object;)Lcom/sap/sql/log/OpenSQLException;(Syslog.java:85)
at
if required i can post the complete stack trace.
any inputs/suggestions are most welcome.
Thanks & regards,
Siddharth

Hi Mark,
Yesterday after Posting the thread we found the same Note ,Issue occured because of JAVA write access was not enabled on the table ,After enabling it as mentioned in SAP Note, Jar file get successfully uploaded.
Thanks for your Help also.
Regards,
Siddharth

Upgrade to ERp6 phase STARTSAP_NBAS error: DDIC login fails

Hi
During an upgrade from 4.7 to ERP6 I get the following error
message in phase STARTSAP_NBAS:
SYSTEM START failed, code -2
-2: the test rfc did not work.
Try to log on to the system with user DDIC
When I try to log on to the system as user DDIC, I get the following
error message:
DB-Error -0
SAP* can log in .The password I submit is correct. I have not changed this password at
any time.
Any ideas are most welcome

Hi,
DB-Error -0 indicate problem with kernel, try to upgrade kernel.
check Note 760175 - 6.20: Logon not possible (after DB export or system copy)
regards,
kaushal

Running workbook from .bat fails to start application missing CORE40 dll

I have been running several workbook via windows task scheduler / vbscript &/or bat files.
I now have a new box which I access thru Remote Desktop Connection, so I can run all these automated updates without having my screen blinking everytime a shedule workbook starts.
If I click on the actual Discoverer icon, or the discoverer workbook shortuct, all works well.
If I click on the .bat file, or try to run the workbook via the cmd , it gives me the following error:
DIS4USR.EXE – Unable To Locate Component
“this application has failed to start because CORE40.DLL was not found. Re-installing the application may fix this problem.”
The dll is under c/orant/bin/core40.dll, which is where I've read it should be, and it works fine in my regular box...
Please help! URGENT :)
Thanks!

Hello
Check the PATH environment variables for the machine you are on and the one you are connecting to.
You might not have Discoverer's objects in the PATH.
Another possibility is that you have more than one piece of ORACLE software on the machine and you may need to also set the ORACLE_HOME within the BAT file.
Best wishes
Michael

Due to my laptop screen failing i have to return to facory settings, can i reinstall adobe reader and adobe air afterwards?

Due to my laptop screen failing I have to return it to factory settings, can I reinstall adobe reader and air afterwards?

I don't see why not. Do you foresee a special difficulty?

Downloads to documents folder fail due to parallel upload

Hi, mobile documents is a great tool that I use to replicate all business relevant documents to mobile clients. However there is one great disadvantage for me. When you download a file that is a bit larger (>1 MB), during the download the client will already start uploading the temporary file. So the download then fails as it cannot convert the temporary file into the final one.
This is something that does not happen for equivalent clients (for example skydrive). Do you think this is something that can be fixed?
thanks,
Heiko

Hi Heiko,
Let me explain again:
You said "uploader locks the file so that it can no longer be changed". For the temporary file it is the downloader which have locked the file. Hence, the impression that file is getting uploaded because it is locked is hence not correct.
The next version might be available in Q1\Q2 2014. We will keep everyone updated via community.
Best Regards,
Ashwani Kr Sharma

Jabber call to voice mail fails with fast busy over VPN

I have an issue that I ran into with CIPC phones over a VPN. If a CIPC phone called over a VPN and started ringing a phone the call would fail with fast busy at the time the call would be forwarded to voicemail. I found the issue was when remote the CIPC phone would negotiate the g.729 codec, when forwarded to a voicemail pilot over a SIP trunk set to g.711 the call would fail due to codec missmatch when no transcoders are present.
So now I am running into what I believe to be the same issue with Jabber, when on premise the calls to voice mail work just fine, but when remote they fail. I can directly call the voicemail pilot without error, but if calling a phone the call gets fast busy at the point we are forwarded to voicemail. Even though all my regions are set to talk to all other regions on G.711 and the voicemail SIP trunk is set to G.711, I believe with the new features in CUCM9 that a lower speed codec has been negotiated since the we are going over the VPN, or Jabber has done this as it knows it's over VPN (not sure). WIth CIPC I could go into the settings and turn off the Optimize for Bandwidth check box and the call would negotiate G.711. With Jabber I can't find anything that would tell my Jabber client to stay on G.711 and I can only imagine this is a codec missmatch as the following are true.
1. CIPC and Jabber share the same line
2. VPN established and CIPC optimised for low bandwidth un-checked
3. Over the same VPN the CIPC phone can leave a voicemail
4. Over the same VPN the Jabber client gets fast busy once forwarded to voicemail
5. Voicemail environment is Exchange-UM over SIP trunk
6. SIP trunk is assigned a Device Pool, that is assigned to a region that all other regions communicate G.711 to
7. On CIPC if optimised for low bandwidth is checked I get the exact same issue as I get with the Jabber client (fast busy when forwarded to voicemail)
Would anyone know what I can do in CUCM 9 to fix this issue, as said no issue when all devices are on premise. Wondering if there is a service parameter or a way to change the codec selection so the Jabber client attempts to always negotiate G.711. The correct answer would be to get some PVDM DSP resources and kick up a transcoder in my resource group, and that may be what I talk them into doing if I have no other options.

We have been getting the exact same thing for almost a year now... since switching to FiOS Digital Voice in May of last year! Every time I call in to report it they 'escalate' the issue but it never gets resolved. The problem seems to be in the initial connection. Most of the time it works fine but, several times a month, after I call to get messages and it starts to play the new message it goes dead and I get the busy signal. I get the same message when I call back: “I’m sorry – that account is in use at this time. Please try again later!” I have even called in with my cell phone and get the same message! I HAVE EVEN used the Internet to see if I could get my messages and, when I hit Play, I get a pop-up saying: “Your Voice Mail box is currently in being accessed; please try again later. If the problem continues, please contact our Customer Support Center at 1-888-553-1555. We apologize for any inconvenience.” This is obviously a software bug that Verizon has no clue on how to troubleshoot OR fix!!! I wonder how many people have the problem and just don’t bother reporting it because of the hassle? When it first started happening they destroyed my entire mailbox and I had to re-enter the complete mailbox setup again – 3 times!!! NEVER let them talk you into that!!! It’s their problem and they need to fix it!!!!!!! I wish I could go back to the ‘normal’ voicemail we originally had… they want hundred$ to switch back because I’d be breaking my #$@%^&* contract! Good luck if you have Verizon………

Gmail access fails on safari. But it works when i login as administrator. Please help!

I am unable to use gmail from a regular user account on my iMac.It fails with an error string that ends with "... becasue Safari can't establish a secure connection to the server "accounts.google.com". "
I have tried resetting safari and it does not help.
I have tried adding DNS entries based on some discussion board suggestions and that does not help either.
I am able to access gmail as an administator on the same machine though!
Please point me in the right direction, please! Thanks!

You may have to take the computer to the Apple store to have the computer checked out.
Dead line is tuesday?
1. Try an external USB keyboard.
2. This may help.
    http://support.apple.com/kb/PH10680
3. Virtual keyboard
    There is a virtual keyboard available in OS X 10.8.4
    System Preferences > Keyboard
    Checkmark the box beside "Show Keyboard & Character Viewrs in menu bar.
    Click "Input Sources" and then "Show input menu in menu bar".
Best.

SSL VPN, "Login failed" and "WebVPN: error creating WebVPN session!"

Hi,
Just ran the wizard for Anyconnect SSL VPN, created a tunnel group, a vpn pool and added user to it. When trying to logon on the SSL service, it simply says "login failed". I suspect that the user might not be in correct groups or so?
some relevant config
webvpn
enable wan
svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1
svc enable
group-policy vpnpolicy1 internal
group-policy vpnpolicy1 attributes
vpn-tunnel-protocol svc
tunnel-group admins type remote-access
tunnel-group admins general-attributes
address-pool sslpool2
default-group-policy vpnpolicy1
username myuser password 1234567890 encrypted privilege 15
username myuser attributes
vpn-group-policy vpnpolicy1
Debug:
asa01# debug webvpn 255
INFO: debug webvpn enabled at level 255.
asa01# webvpn_allocate_auth_struct: net_handle = CD5734D0
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_login_resolve_tunnel_group: tgCookie = NULL
webvpn_login_resolve_tunnel_group: tunnel group name from default
webvpn_login_resolve_tunnel_group: TG_BUFFER = DefaultWEBVPNGroup
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
webvpn_portal.c:webvpn_login_aaa_not_resuming[3137]
webvpn_portal.c:http_webvpn_kill_cookie[790]
webvpn_auth.c:http_webvpn_pre_authentication[2321]
WebVPN: calling AAA with ewsContext (-867034168) and nh (-849922864)!
webvpn_add_auth_handle: auth_handle = 17
WebVPN: started user authentication...
webvpn_auth.c:webvpn_aaa_callback[5138]
WebVPN: AAA status = (ACCEPT)
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
webvpn_portal.c:webvpn_login_aaa_resuming[3093]
webvpn_auth.c:http_webvpn_post_authentication[1485]
WebVPN: user: (myuser) authenticated.
webvpn_auth.c:http_webvpn_auth_accept[2938]
webvpn_session.c:http_webvpn_create_session[184]
WebVPN: error creating WebVPN session!
webvpn_remove_auth_handle: auth_handle = 17
webvpn_free_auth_struct: net_handle = CD5734D0
webvpn_allocate_auth_struct: net_handle = CD5734D0
webvpn_free_auth_struct: net_handle = CD5734D0

AnyConnect says:
"The secure gateway has rejected the agents VPN connect or reconnect request. A new connection requires re-authentication and must be started manually. Please contact your network administrator if this problem persists.
The following message was received from the secure gateway: Host or network is 0"
Other resources indicate that it's either the tunnel group, or the address pool.. The address pool is:
ip local pool sslpool2 172.16.20.0-172.16.20.254 mask 255.255.255.0
asa01# debug webvpn 255
INFO: debug webvpn enabled at level 255.
asa01# debug http 255
debug http enabled at level 255.
asa01# webvpn_allocate_auth_struct: net_handle = CE9C3208
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_login_resolve_tunnel_group: tgCookie = NULL
webvpn_login_resolve_tunnel_group: tunnel group name from default
webvpn_login_resolve_tunnel_group: TG_BUFFER = DefaultWEBVPNGroup
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
webvpn_portal.c:webvpn_login_aaa_not_resuming[3137]
webvpn_portal.c:http_webvpn_kill_cookie[790]
webvpn_auth.c:http_webvpn_pre_authentication[2321]
WebVPN: calling AAA with ewsContext (-845538720) and nh (-828624376)!
webvpn_add_auth_handle: auth_handle = 22
WebVPN: started user authentication...
webvpn_auth.c:webvpn_aaa_callback[5138]
WebVPN: AAA status = (ACCEPT)
webvpn_portal.c:ewaFormSubmit_webvpn_login[3203]
webvpn_portal.c:webvpn_login_validate_net_handle[2234]
webvpn_portal.c:webvpn_login_allocate_auth_struct[2254]
webvpn_portal.c:webvpn_login_assign_app_next[2272]
webvpn_portal.c:webvpn_login_cookie_check[2289]
webvpn_portal.c:webvpn_login_set_tg_buffer_from_form[2325]
webvpn_portal.c:webvpn_login_transcend_cert_auth_cookie[2359]
webvpn_login_transcend_cert_auth_cookie: tg_cookie = NULL, tg_name =
webvpn_portal.c:webvpn_login_set_tg_cookie_form[2421]
webvpn_portal.c:webvpn_login_set_tg_cookie_querry_string[2473]
webvpn_portal.c:webvpn_login_resolve_tunnel_group[2546]
webvpn_portal.c:webvpn_login_negotiate_client_cert[2636]
webvpn_portal.c:webvpn_login_check_cert_status[2733]
webvpn_portal.c:webvpn_login_cert_only[2774]
webvpn_portal.c:webvpn_login_primary_username[2796]
webvpn_portal.c:webvpn_login_primary_password[2878]
webvpn_portal.c:webvpn_login_secondary_username[2910]
webvpn_portal.c:webvpn_login_secondary_password[2988]
webvpn_portal.c:webvpn_login_extra_password[3021]
webvpn_portal.c:webvpn_login_set_cookie_flag[3040]
webvpn_portal.c:webvpn_login_set_auth_group_type[3063]
webvpn_login_set_auth_group_type: WEBVPN_AUTH_GROUP_TYPE = 4
webvpn_portal.c:webvpn_login_aaa_resuming[3093]
webvpn_auth.c:http_webvpn_post_authentication[1485]
WebVPN: user: (myuser) authenticated.
webvpn_auth.c:http_webvpn_auth_accept[2938]
HTTP: net_handle->standalone_client [0]
webvpn_session.c:http_webvpn_create_session[184]
webvpn_session.c:http_webvpn_find_session[159]
WebVPN session created!
webvpn_session.c:http_webvpn_find_session[159]
webvpn_remove_auth_handle: auth_handle = 22
webvpn_portal.c:ewaFormServe_webvpn_cookie[1805]
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE9C3208
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE9C3208
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE9C3208
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_allocate_auth_struct: net_handle = CE9C3208
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE9C3208
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C3208
webvpn_allocate_auth_struct: net_handle = CE863DE8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE863DE8
webvpn_allocate_auth_struct: net_handle = CE863DE8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE863DE8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE863DE8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE863DE8
webvpn_allocate_auth_struct: net_handle = CE863DE8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE863DE8
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
HTTP: Periodic admin session check (idle-timeout = 1200, session-timeout = 0)
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_allocate_auth_struct: net_handle = CE9C32C8
webvpn_auth.c:webvpn_auth[581]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
WebVPN: session has been authenticated.
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_allocate_auth_struct: net_handle = CE9C32C8
ewsStringSearch: no buffer
Close 0
webvpn_free_auth_struct: net_handle = CE9C32C8
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:http_webvpn_find_session[159]
webvpn_allocate_auth_struct: net_handle = CC894AA8
webvpn_session.c:http_webvpn_find_session[159]
webvpn_session.c:webvpn_update_idle_time[1463]
Close 1043041832
webvpn_free_auth_struct: net_handle = CC894AA8

Racgons Failed

Similar Messages

Maybe you are looking for