Rack mount kits doesn't fit the depth of Agilent rack

I have a PXI 1085 Chassis which I want to mount in an Agilent rack.  I purchased the front and rear rack mount kits, the height and width are great, but the depth of my rack doesn’t allow me to use both the front and rear rack mount kits.  Is there some kind of adapter I can buy which will extend the rear rack mount so that it can reach the back?

Hi Chall,
Unfortuantely we only offer the kits for a certain size range. If this does not fit your rack then you will have to create a custom rack mount.
Regards,
Kaitlin N.
National Instruments
Applications Engineer

Similar Messages

  • Catalyst 3850 rack mount kit: 3850-RACK-KIT or C3850-4PT-KIT ?

    When purchasing a Cisco Catalyst 3850, do we need to buy the rack mounting kit to install it in  a standard 19" rack? 3850-RACK-KIT or C3850-4PT-KIT ? Is the 4-point kit really necessary, can the 3850 hang only on the front of the rack?

    No, you don't need the C3850-4PT-KIT.  3850-RACK-KIT comes in the box and it is good enough as long as you rack it nice and tide. The reason some people use C3850-4PT-KIT is because the switch will hang from the back a little when using 3850-RACK-KIT and so if you don't like that than you want the 4PT.
    HTH

  • Extras from the Rack Mount Kit

    With the XServe rack mount kits sending us parts for both the shallow and deep racks, is there something we can do with all the extra parts we do not use? Does apple have a recycle/reuse for them or do we just send them down to the local recycler along with the soda cans from install night?
    I also keep thinking there has to be some good use for that large white plastic shipping cover that comes on the XServe but we only have so many doors needing propped open.
    Any suggestions?

    Your local Apple Authorized Service Provider would probably love them! If you gave them to him free, he would be your new best friend, and you would strike up a relationship with someone who may work with you when it comes time to procure new hardware.

  • MCS-7835H3-OFFER= Is a rack mounting kit included?

    I have a customer who is getting their MCS7835H2-DMM51K9 server replaced with a MCS-7835H3-OFFER=
    All I need to know is, does the MCS-7835H3-OFFER=  come with a rack mounting kit or not? If not, could the existing MCS7835H2-DMM51K9 server's rails be reused?
    I'm assuming that it's the same chassis but with a faster processor and more mem/disk and would be a straight swap but can anyone clarify if this "H3" part number comes with a rack mount kit?
    Thanks,
    DR

    All currently shipping Cisco MCS 7800 servers include a “generic/third-party rail kit”.
    ● Compliant with 19-inch Industry-standard EIA-310D
    ● Depth range of the slides is from 440mm to 790mm
    ● Threaded racks: M6, 10-32, and 12-24
    ● Also enables punched round and square hole racks
    Cisco Unified Communications Solutions Ordering Guide
    Page 64
    http://www.cisco.com/web/partners/downloads/partner/WWChannels/technology/ipc/downloads/UC_8_6_OG.pdf

  • Rack mount Kit for ESW500

    Hi Team,
    Looking that either the rack mount kit for ESW500 is orderable as a spare. I'm not sure if the one for UC520 can fit the ESW500s
    ACS-UC500RM-19=
    https://supportforums.cisco.com/docs/DOC-9698
    Best Regards,
    Sohaib

    Hi Victor, you're right the separate skus aren't for sale. However, I'd recommend to call the SBSC team. A lot of times, if your product is under warranty, they are able to ship a replacement unit to you then you can remove the rack mount and just return the package. It's worth a shot!
    -Tom
    Please mark answered for helpful posts

  • Rack mount kit - WLC 2100

    What's the Part Number for the Cisco WLC 2100 rack mount kit?
    Thanks in advance.

    Allows for convenient desktop mounting or rack mounting, with optional rack mount kit for flexible deployment.
    http://www.cisco.com/en/US/products/ps7206/products_data_sheet0900aecd805aaab9.html

  • Rack mount kit for SRW208P?

    Hello all -- anybody with 2 x rack mount kits for a SRW208P that they don't want? I need to rack mount these devices but my predecessor very wisely decided to throw them out and Cisco does not sell the racks as a separate SKU. Thanks.
    Victor

    Hi Victor, you're right the separate skus aren't for sale. However, I'd recommend to call the SBSC team. A lot of times, if your product is under warranty, they are able to ship a replacement unit to you then you can remove the rack mount and just return the package. It's worth a shot!
    -Tom
    Please mark answered for helpful posts

  • Mac Pro Rack Mount Kit?

    Come on Apple.  If you are change from Xserve to Mac Pro for servers, at least offer a rack mount kit or a case that has attachable rails.  I don't want to use 12U of space to stand up a Mac Pro on a shelf in a rack.
    I apologize if you already offer this as an optio, but I sure couldn't find it.

    Some rumor sites are saying that a new Mac Pro cabinet is being developed which will change rack mounting. We may know more about it by the end of the summer.

  • ASA5505 Rack Mount Kit

    May I know the rack mount kit for ASA 5505 released yet? May I have the part number of it?
    Many Thanks!

    I checked with my local SE before, they also haven't any information.
    Because my local SE give me wrong part no of this rack mount kit, I need to provide this part no for replacement!
    Many Thanks!
    Hang

  • Anyone have a used rack mounting kit (076-1234) ?

    I bought a great Early 2008 Xserve from a guy. I'm building it up now with fresh ram, new enterprise hard drives etc. It's coming out great. But I need to get a square hole rack mount kit. I thought that would be the easy part, but they're really hard to find. The only places that carry them online, are price gouging the crap out of them because apple has stopped selling them. I don't need a nice shiny new kit though. A well used, paint-scraped rail kit would be perfect.

    Hi stephenberry,
    I have 2 Right brackets because it was shipped wrongly from a reseller as well. Would you be willing to trade a left bracket for a right bracket?

  • Workspace doesn't fit the screen anymore...

    Hello.
    Since today (and Mac OS X's update I installed this morning, I guess), my Photoshop CS6 workspace doesn't fit the screen of my 12 inch Cintiq (connected to a 2014 Macbook Air).  No matter what I do, it keeps it wrong.
    Trying to set the photoshop window to the whole Cintiq screen with the "green" Mac OS corner button, this is what I get:
    Hitting F won't do the trick, this is what it gets me:
    I tried to clear the Photoshop prefs, without success.  I checked for updates and found there was a Photoshop update I had not yet installed, and I did install it, to no success.  Needless to say, this makes my copy of Photoshop most unusable, which is a really big problem for an illustrator like me.  I really wish I can solve this as soon as possible.
    Thanks.

    Yeah, no results. Still the same.
    If I take my main window and move it up by myself, it's just gonna stay there until the next click somewhere, then it gets back to this wrong placement,.

  • Battery failure although my battery doesn't fit the exchange program?

    hello there!
    i know there have been a lot of threads about the battery life and failures in the macbook pro but i don't know which one fits my case...
    my mbp is a week 13 and has no problems at all. i don't use the battery that often - by now i have 14 cycles.
    my battery's serial number doesn't fit the exchange program but today happened this odd thing:
    i used my mbp on battery for less than two hours and the battery symbol said that i still have about 50 minutes of battery power. all of a sudden it turned off (as described in many other threads) without any warning and i couldn't turn it on without plugging in the power cable. when i turned it on it started from deep sleep mode (dimmed desktop).
    ...of course i did reset the pram and stuff - but what is going on? as i said i don't meet the exchange program for faulty batteries but still it doesn't seem to work proper.
    what can i do?
    thanks in advance, guys!
    j.

    hi and thank you all for your replies so far!
    over the weekend i took some screenshots showing the various total of mAh. i have no idea if that is normal like this? and the battery is behaving normal again, no random shutdown... you can find the images under the following link...
    http://www.propaganda-pixel.de/mbp/mbp.htm
    in addition i added a photo of my magsafe... now that it comes to the battery issue i got slightly concerned if this crimpy cord should be like this (not that this thing starts to melt on me!).
    when i transport my mbp i wind the cord around those two hooks and i never pull the magsyfe by the cord out. but still it looks like this.
    the power cord is from a week 10 macbook pro which i got exchanged for a week 13 but i had to keep the cord...
    i know, this has nothing to do with the battery issue and no, i'm not paranoid - just now that i started this thread i thought i could add it...
    so my questions are:
    - shall i request a new battery considering the various mAh indications?
    - shall i request a new power cord? or does mine look normal?
    why i ask is because i don't want to request something when there is no need for a replacement.
    thank you all!

  • Booklet .pdf with crop marks, booklet doesn't fit the current paper size warning

    Hello. I am on XP using CS4 InDesign.
    I have the document set up as 4 pages, each 8.5 x 11, however, when creating a booklet .pdf, I mean it to be 2 pages 11x17.
    When I add in the crop marks they do not appear on the .pdf when it is created. I receive a warning in the booklet diaglog that the booklet doesn't fit the current paper size and it says to specify a larger paper size.
    What can I do to have the crop marks on my file? I understand the .pdf will be a little larger than 11x17 in order to fit the crop marks.
    Thanks for any help in advance.

    Hi Peter,
    Thank you. I did try that first, but now I figured out what I did wrong. When the .pdf was made and opened, I cropoped the page according to the marks, but the page remained 12 x 18 instead of 11x17. I made sure that the "automatically adjust to fit marks and bleeds" and "use document bleed settings" was checked in the booklet dialog and print InDesign dialog.
    When I cropped the page again to make sure I sized it correctly, it was 11x17.
    Thank you!!!

  • A5 booklet  "doesn't fit the current [A4] paper size". What's wrong?

    Hi,
    Sorry, I'm new to InDesign, and am having a bit of a freakout over a booklet I need to complete by this afternoon.
    The page sizes are all A5. I try to print with A4 paper settings and the preview looks okay, but says underneath "the booklet doesn't fit the current paper size". Obviously A5, A4, it should fit perfectly, as  it looks to in the preview. When I actually print it the pages are slightly jumbled - 3 with 24  (of 24 pages), 4 with 23 etc., with the centrefold 12-13 split (12-15, 13-14).
    Any idea what's going on here? Is it something to do with crop areas? I can't work it out.
    Thank you! An enormous amount of gratitude to anyone who can help me fix this.

    OH HEY  it's suddenly saying it's fine now, even though the  only thing I've changed is to add a  bit  of  text, nothing that should fundamentally affect the structure. Thanks InDesign!

  • My thunderbolt to firewire adapter doesn't fit the firewire???

    I bought the apple store "Thunderbolt to FireWire Adapter" today.  I'm trying to put my old iMac in Target Mode and move old files.  The firewire cord doesn't fit into it???  I'm sitting here feeling pretty stupid and stumped?

    Your firewire cord is the wrong size.  Apple's cord is 800 port.  What size is your cord? 

Maybe you are looking for