Radar graph - fill

Hi all,
Here is the example of what I mean
http://peltiertech.com/Excel/Charts/VBAdrawradar.html
Radar graph in OBIEE has a fill of series. How to achieve to have only line without fill?
Thanks all

Thanks for the link. It is impressive. However, I am after the source code for radar graph, also known as spider graph or star graph. It is an x,y chart.
Any help would be welcome. I have been searching for it for the last 2 weeks.
Thanks
Alina

Similar Messages

In a graph, fill base line both -infinity and infinity

Hello,
In a graph is it possible to fill base line to both negative infinity and positive infinity?
Thanks

Could you explain what you are imagining this to look like? If the plot color was red and you could fill this to both -infinity and +infinity then the whole graph would be colored red...
If you meant for the colors to be different an easy work around is to the set either the -infinity or +infinity and then color the background of the graph to the other color:

3d graph fill to -infinity?

In a 2D graph, I am using the feature "fill to -infinity" on a plot to fill in the area under the line. Now, I want to have several plots and plot them in 3D, with the 3rd dimension being the plot number. I'm running into a problem though... I can't find an equivalent for "fill to -infinity" with the 3D Curve graph.
Any suggestions?
Thanks!
mlloyd

If this is the kind of graph you want to build, just add Z values lower than the lowest Z scale value to your data.
See the attached vi.
Message Edité par chilly charly le 08-27-2005 03:05 AM
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
3D to infinity.png ‏31 KB
3D to infinity.vi ‏68 KB

Creating a percentage value radar graph

I'm building a report in Adobe InDesign CS6 and I need to include a couple of Percentage Based Radar Chart (see attached). One will be divided into 10 segments and the other in 9.
I've found a Pie Chart by Percentage in MS Excel but the formula is very, very complicated.
I am not at all familiar with Adobe Illustrator (CS6) so any help would be greatly appreciated.

Millennium, Thank you for your unhelpful and opinionated response. Of course I can build triangles and that is what I've done as shown. What I'm looking for is a graph template or builder to generate the graph from the numbers being input same as you would with a Radar Chart or Pie Chart.
Not quite sure how you got to the level of MVP like that.

PDF Graph Fill Error

Hey All,
I am having an issue where PDF output on a bar chart report does not fill correctly on the first 15 or so pages. After that it draws the charts correctly. Here is what the first 15 look like, various colors are missing in the bars and in the key.
!http://img32.yfrog.com/img32/3849/mistakeh.jpg!
http://img32.yfrog.com/img32/3849/mistakeh.jpg
It fills correctly after the first 15 or so pages.
!http://img689.yfrog.com/img689/6066/46454945.jpg!
http://img689.yfrog.com/img689/6066/46454945.jpg
Has anyone ran into this problem before? Every other output format (ppt, html) draws correctly.
-Luke

Your question is not a feature request, please repost in the Acrobat Windows forum.

Zoom Radar Graph/Plot

Hello,
is there a way to zoom in/out in a radar plot. (http://zone.ni.com/reference/en-XX/help/371361J-01/lvpict/radar_plot/)
Thanks in advance!

as the output of this vi is a picture control, you can use the zoomfactor property-node:
"..\National Instruments\LabVIEW 2014\examples\Graphics and Sound\Picture Plots\Simple Radar Plot.vi"
♜♖ LabView 8.6 - LabView 2014 ♖♜

DVT graph not filling entire container width

Experts,
I have a DVT bar graph in my tabbed panel having "AFStretchWidth" set inside a panelHeader. But my graph is not stretching to fit the entire screen. I have also tried to set the "AFStretchWidth" in the graph but not productive.
eg: panelheader having
- panelTabbed styleclass set "AFStretchWidth" containing
- dvt styleclass set "AFStretchWidth"
Any ideas how to make the graph fill the entire container width ?
thnks

Make sure that Tab Panel (or parent of DVT Component) is stretched.
Set dynamicResize property value of DVT to DYNAMIC_SIZE.

Radar plot with category label changed

Hi
I tried this example vi, Line Graph (Excel).vi, with some modification as shown in the attached picture. I changed the plot to a xlRadar. After I run the vi, I got the result as shown in another attached picture. I would like to know how to change the font size of the Category Label programmatically in my vi.
Thank you & Regards
Lee
Attachments:
test 2 - vi.JPG ‏61 KB
test 2 - result (modified).JPG ‏173 KB

Lee,
I thought that the example would work the same with the line graph and the radar graph, but it looks like I was mistaken. I attempted to drill down to the property nodes and change the font size there, but this was unsuccessful. Digging into the lower level VIs which the Set Graph Font VI calls, I could not find a way to do this either.
The problem stems from the Axis Type input on the Set Graph Font VI. The options are xlvalue, xlcategory, and xlseriesaxis. Certain scale types cannot be used with certain chart types. For instance, xlSerisAxis cannot be used with any chart type because it is only supported in 3D charts (which we do not support in RGT). Further, xlCategory is only valid with the xlXY charts and xlBubble charts--which the radar graph is not part of.
Therefore, you won't be able to change the category label font size with the built in functionality of the RGT. Since the RGT uses ActiveX calls to Excel to manipulate the graphs, if you wanted to build in this functionality, you could do so with ActiveX. Your best source for this would be the MSDN.
Please let me know if you have any more questions.
Regards,
Craig D
Applications Engineer
National Instruments

Charts and graphs

hi all
I have an application that gives me a real time signal that should be displayed continuously . Well, when i connect the wire that is giving me a signal to a waveform graph, the signal keeps appearing properly until the graph fills and looks like your compressing a spring .
i have tried to turn the X autoscale ON and OFF and the same for Y but nothing revealed .
BUT when i use a waveform chart it works well and i can see a real time signal .
any help ?
Bill David

I think you might want to read the difference between a graph and a chart. You will understand why stuff is happening.
http://www.ni.com/academic/students/learnlabview/graphs.htm
or
http://zone.ni.com/reference/en-XX/help/371361J-01/lvconcepts/types_of_graphs_and_charts/
Kind regards,
- Bjorn -
Have fun using LabVIEW... and if you like my answer, please pay me back in Kudo's
LabVIEW 5.1 - LabVIEW 2012

How to make editable pieces of pie/circle segments?

I want a graphic a bit like this:
How can I draw so that each of these 50 segments is an independent object that I can fill with color or delete?
Also, out of curiosity: what is this kind of plot called - is it a radar graph? Or a polar graph? I'm pretty sure it has a name, I just don't know what it is.

Marie,
That is just another way of creating it. Often there are multiple/several ways of creating things, sometimes with different advantages. They way you created this allows more freedom, such as not being bound by specific integer ratios between the circles.
You can still select everything and Pathfinder>Divide to get the 50 closed paths to fill separately, after Ungrouping if you wish.

Mac book starts to boot, then turns off

I have Mac Book Pro (13", Yr2011) which will not boot. It has a 1TB HD which has been partitioned for Mt Lion (primary) and Snow Leopard. The computer has worked fine in this configuration. For about 6 wks, the computer was not used and apparently the battery charge depleted to zero. When an attempt was made to use the computer with battery only, the screen was just light gray with a circular wait icon. After several minutes with no change, the battery was noted to be discharged. A charger was connected, but there was no change in the screen. The computer was then turned off and left to fully charge. On first attempt to turn on, the computer did come to life. However, when attempting to Update software, it displayed No Internect connection - even though it was connected by ethernet. The computer was power cycled, however the screen then again only showed light gray with wait icon. Now when attempting to boot, the screen shows light gray, circular wait icon & horizontal bar graph indicating something is loading. After about several minutes, the bar graph fills & disappears, however, the screen remains light gray with wait icon - indefinitely. On a few attempts, the computer and screen simply turned off after about 30secs.
If I hold the Option key while powering on, then the Mac does boot ok to Snow Leopard. Apparently, the Mt Lion side of the HD was corrupted during the low battery boot appempt. The last time I backup MtLion was several months ago, so if I prefer not to reformat and reload from scratch.
Since the Mac did boot up once, I'm wondering if there is a way to recover without having to reformat and start again.
Don

Tough without the Install disc, but some things to try...
Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).

How to create a blank theme with no embedded textures?

Hi,
I have created a custom theme based on the "White" theme thinking that it was truly blank. But when I save my new theme, I see that it weighs a hefty 11Mb.
After looking in the package contents, I see that there are marble textures remaining from the White theme. These are used on the default charts.
I tried creating new default charts that contain none of the textures but they are still saved with the template. I cannot delete these files directly in the package because I get a "Missing File" error when using the theme. Unchecking "Copy theme images into document" in the preferences doesn't change anything.
My question is: how do you create a truly empty theme with no textures nor images embedded in the package?
Many thanks for any ideas.
e)
Dual 1 Ghz Power Mac G4 Mac OS X (10.4.6)

egoes, if you haven't already, you might consult the Keynote User Guide, page 181. The guide talks about how to create new themes, and how to define default chart styles for those themes. The instructions are unfortunately not terribly clear, but it appears that you have to create default charts for each chart type. (I would imagine that the new theme would use old defaults for any charts that aren't newly defined, which would leave in the textures you want to eliminate.)
If you have no luck following the User Guide directions, and size is important, you might instead start with a smaller theme as your base (e.g., Pinstripe is only 3.1MB, and the default graph fill is a colour fill, not a texture). From this you can strip out the background and other graphics you don't want. With just a blank Master with the background removed, this theme is only 612KB. This is likely the easiest way to produce what you want.
PowerMac G5 Mac OS X (10.4.4)

How do i create a fitness countdown in motion 5 similar to p90 x or insanity?

How do I create a fitness countdown in motion 5 that is similar to p90 x or insanity?

Google my friend...
I think this is what you want... made this in a few secs.
Library... Generators... Timecode.
Set the text properties for the Timecode text. Use a mono space text, Courier. Turned off background color if you wish.
Clone the Timecode layer (turn off the original Timecode layer)
Properties... Timing... Reverse.
As for the bar graph... There probably a right way to do this and I probably didn't do it right. I just made a bar graph with an outline and fill, duped it. The top bar graph with outline no fill, bottom bar graph fill no outline. Keyed the bottom bar graph to travel from right to left. Cloned the bar graph layer and placed a mask (revered) to cover the red bar as it traveled to the right. You can add tick marks with text to the bar graph.

How to override confirmation message as part of batch action?

I have created an action in Illustrator CS5 that ungroups a radar graph and deletes the axis lines. And I would like to run this action on a batch of 100 files. The problem I am having is that when I run the action, I get the following pop-up message at the ungroup command:
If I click OK, the action continues. But, as part of a batch, it becomes a bit tedious to have to click "OK" 100 times, and it sort of defeats the purpose of running the action as a batch.
I see options in the batch window to override action "Save As" and "Export" commands, but is there a way to have the batch override this confirmation message? I suspect there may be a way to do this with a script, but I am not proficient enough with scripting yet to take that route.
Thanks for looking at my questions.
NW

One year of patience. That's commendable …
Neil, I have not done what you did, but my suggestion would be to take the Flatten Transparency command instead of the Ungroup command in your action.
You should get the same result – that is, ungrouped (expanded) graph objects – if you carefully set up the Flatten Transparency dialog.

Connection for load cell to NI9237

Hi,
I have this omega load cell part LCKD-10 which is a half bridge load cell that I need to connect to the NI9237. Please advice on the connection.
Thanks
Joelle

Thanks. I need to write out a program which checks the centrality of force. I will be using 5nos of the omega load cell, 1 in the centre(Isolated) and the other 4 at all 4 corners. I'm suppose to firstly calibrate the load cell and then take measurement of the force applied to the 5 load cell and display the result in a form of a radar graph (Just a dot in the centre of the graph to show the centrality of the force). Appreciate if you can provide some procedures or program that I can use or try out.

Radar graph - fill

Similar Messages

Maybe you are looking for