Radeon 9800 pro and msi

dont know whats up with my card but when i Play games I dont get a constent 100 frame per seconded. I think it something to do with mY mobo but i dont know plz could u help. and on system overview this comes up (GFX) Intel(r) 82815 Graphics Controller,

Ummm, ok.
I have installed this card WITH the latest drivers on a boxed retail D845WN, an AMD 1800, AND another MSI 845PE MAX
board and my results have been, to say the least, angering...This card runs PERFECTLY with all other boards EXCEPT(u guessed it)THE MSI BOARD! I almost cannot believe that such a HUGE problem lingers with this particular line of MOBOS and I have A HUGE PROBLEM with this...
(consumer affairs anyone?)I haven't even TRIED to install it on the other 10 MOBOS I installed at one of my clients...
I find this to be very disheartening for the fact that I should have just requisitioned 10 INTEL Boxed boards as opposed to being cheap and requisitioning 10 MSI boards(never again)I am almost at a loss for words at this point seeing as how I staked my clients interests and my own on a product that does not carry itself even to the point where it can provide at least some of the functionality that was advertised(with exception to it turning on)
I DEMAND SATISFACTION!!!!!!!!!!!!!!
I DEMAND SATISFACTION!!!!!!!!!!!!!!
I DEMAND SATISFACTION!!!!!!!!!!!!!!
I DEMAND SATISFACTION!!!!!!!!!!!!!!
I DEMAND SATISFACTION!!!!!!!!!!!!!!
some rep from the company insert post here...

Similar Messages

Radeon 9800 pro and memory problem

Hey i was wondering if someone could help me. I have a kt4av-l board. I just put in a radeon 9800 pro and When i play some games im getting crappy fps i updated the chipset drivers and the card drivers but still no help i have a 2400+ processor. also I bought a stick of ddr 2700 1 gig and for some reason i can't use the ram get alot of errors with it. i have two sticks of ddr 400 in there now 2 different brands and sizes and that runs fine but when i put that other stick in there by itself it doesn't work.

Hello,
It could be a weak power supply, have a look on your power supply's sticker for the following
eg
400w
+12v = 13a
+5v = 40a
+3.3v = 28a
The new stick may actually be faulty.
http://www.memtest.org/download/1.51/memtest86+-1.51.floppy.zip
Here is a program to test the memory.
Try increasing the voltage to 2.7v and set the frequency to match the CPU FSB. (133Mhz)
Is the CPU running at 2Ghz?
Sometimes when you buy a new video card the previous cards driver may conflict with the new one.
Try a reinstall of windows.
Also did you plug a power connector into the 9800pro?
Are you using any ATi drivers?
Your board may need a bios update to fix a 9800 compatibility issue.
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=456&kind=1

ATI Radeon 9800 Pro and kt4 ultra

Hello
i was curious to know of any problems with the Kt4 ultra motherboard and the Radeon 9800 pro??
my system constantly crashes back to the desktop, or completely locks when i play Command & Conquer Renegade.
there are also some "misdrawn?" walls in the game also,...
i have all the latest drivers for the motherboard and the card,(including the released today catalyst drivers from ati.com)
i have also tried the drivers from driverheaven.net, but same thing happens,...
this is truly aggreviating...
some system specs:
kt4 ultra
antec 380 true ps
2500+ barton running at 11.5*173 @ 30c idle, 33c full load
corsair 2*256 3200LL
built by ati radeon 9800 pro 128mb
ive read where you can increase the agp voltage to try and fix the problem...and i also saw where one guy was just going to buy another motherboard b/c of the issues...
any help is truly appreciated
thx

FWIW, in case anybody is reading this thread in future and has problems with this Board and this card, I can report that I have now(at my second attempt) successfully installed a Radeon 9800 Pro on MY kt4 uLTRA motherboard.
As noted above, I purchased a new Antec True Power unit, prior to installing for a 2nd time. I am not sure whether that was necessary, but it certainly didn't hurt. The successful installation process was as follows:
1) Download the latest catalyst drivers from ATI
2) Set monitor to lowest possible standard (640 x 480, 16 colours if possible - in my case my digital monitor could not be set lower than 800 x 600)
3) Uninstall drivers for existing video card
4) Replace video card
5) Install ATI drivers
6) restore settings on monitor to maximum.
At that point, after restarting the computer, I had a CLI.exe error. After Googling for this problem, I discovered that I needed to download Net 1.1 from Microsoft. After downloading and installing that additional program, Radeon 9800 Pro is now working perfectly.

ATI Radeon 9800 Pro and Apple Cinema Display compatibility

I'd like to buy an Apple Cinema Display for my 5-year-old Power Mac G5 with an ATI Radeon 9800 Pro, but I'm having trouble understanding what I can and can't hook up to my system.
I was thinking of getting a 30" display, but the Apple Store says I need a Dual-Link DVI, which I don't think my graphics card supports, but the Store also says I need an ATI Radeon 9650 or better, which I imagine the 9800 Pro is.
I've looked at the ATI site for data on the graphics card, but their online manual shows a completely different set of connections on the card. They show VGA and S-Video out ports that mine doesn't have.
Does my ATI Radeon 9800 Pro have dual-link? If so, can I use the 30" display? If not, can I still use the 30" display?
If I can't use the 30" display, are there any compatibility problems with the 23" Apple Cinema Display?

The 9800 is faster than the 9650, but it doesn't have a dual-link DVI port.
Make sure you were looking at the Mac section of ATI's site. PC and Mac versions of the same card may have different port configurations.
AGP cards with dual-link DVI, starting with the fastest:
ATI Radeon X800 XT 256MB (ADC, dual-link DVI) (Some reports of problems with Leopard)
<http://www.welovemacs.com/0831xeghr.html>
NVIDIA GeForce 6800 Ultra 256 MB (Two dual-link DVI)
<http://www.welovemacs.com/6613332.html>
NVIDIA GeForce 6800 GT 256 MB (Two dual-link DVI)
<http://www.welovemacs.com/6613441.html>
ATI Radeon 9650 XT (Single-link, dual-link DVI)
<http://www.mac-pro.com/ATI-Radeon-9650-256MB-for-G5-661-3593?sc=2&category=42>
ATI Radeon 9600 Pro PC & MAC Edition RoHS 256MB AGP (Single-link, dual-link DVI)
<http://shop.ati.com/product.asp?sku=3170809>
A 23" will work with any G5 card.

Ms-6570 Radeon 9800 pro keeps freezing up

hello I just purchased at radeon 9800 pro and everytime i play a game the screen freezes up at random and the sound starts to echo. I know this is a video card problem as my gf4 works fine in my system. I have read most of the posts in this forum and have disabled and enabled all kinds of stuff trying to aleviate this problem but nothing seems to work. Good ol Nvidia, why did I ever doubt you? All my components are farely new and all my drivers and bios are up to date. I have tried doing a fresh install of windows xp as well. I am torn, I have been eye ballin a DFI lan party motherboard, but I am wondering if a MSi 5950FX would fix my problem. I doubt i will ever purchase an ati again, sad, but they will not return my emails and put you on hold for countless hours. Replacing my existing hardware is a last resort though as i would like to get some klipsh 5.1 instead! Pleae help, so many games, so little time, so many Freezes!!!!!!!

isa 0 system timer
isa 3 com2
isa 4 com1
isa 6 floppy
isa 8 system cmos
isa 9 MS axpi compliant system
isa 13 numeric data processor
pci 5 nvidia nforce pci system managment
pci 14 nvidia nforce spp/igp ata controller
pci 15 nvidia nforce spp/igp ata controller
pci 16 creative sb audigy 2 wdm
pci 17 ohci compliant ieee 1394 host controller
pci 19 radeon 9800 pro
pci 20 standard enhanced pci to usb host controller
pci 21 nvidia nforce mcp networking controller
pci 21 standard openhcd usb host controller
pci 22 standard openhcd usb host controller

ATI Radeon 9800 PRO openGL Troubles

Machine Name: Power Mac G4
Machine Model: PowerMac3,5
CPU Type: PowerPC 60? (1.1)
Number Of CPUs: 1
CPU Speed: 2 GHz
L2 Cache (per CPU): 512 KB
Memory: 1.25 GB
Bus Speed: 133 MHz
Display
ATI Radeon 9800 Pro:
Chipset Model: ATY,R350
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x4e48
Revision ID: 0x0000
ROM Revision: 113-A07525-130
I have been looking for someone with the same or similar problem as mine to no avail
Ok so heres my problem...a few months ago i noticed that the screen saver had frozen on my G4 mac
At the time i didn't think anything of it so i try to reboot but it wouldn't get any further than the "Blue" screen after weeks of trouble shooting, reading through logs and surfing what felt like 90% of the net i tracked it down to the "ATI Radeon9700 Extensions" in my system folder.
As you can see from above i have a "ATI Radeon 9800 PRO" and i presume that it runs off the 9700 drivers because there are no 9800 extenstions in the driver updates from ATI....
Anyway this is the strange bit ....if i boot up in "Safe Mode" and delete all the "ATI Radeon9700 Extenstions" below
ATIRadeon9700.kext
ATIRadeon9700DVDDriver.bundle
ATIRadeon9700GA.plugin
ATIRadeon9700GLDriver.bundle
ATIRadeon9700VADriver.bundle
Then trash...
Extensions.kextcache
Extensions.mkext
Then put a new copy of the "Radeon9700 Extensions" from the 10.4.8 upgrade back in, it boots fine.
These extensions come with the apple OS updates so everytime i upgrade the OS i have to go through the above steps again.
I am starting to think that the openGL capabilities of my card is fooked because the screensaver that im talking about is "Flurry" and it is really jerky now if i try to run it
I know that the SS users openGL
Also if i try and launch UT2k4 i get a crash log error of "unable to create pixel format.
This is what the boot up log looks like before i trash the extensions
13:03:04 localhost kernel[0]: 962:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 963:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 964:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 965:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 966:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 967:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 968:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 969:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 970:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 971:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 972:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 973:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 974:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 975:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 976:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 977:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 978:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 979:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 980:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 981:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 982:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 983:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 984:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 985:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 986:0xffffffff
Dec 28 13:03:04 localhost kernel[0]: 987:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 988:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 989:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 990:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 991:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 992:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 993:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 994:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 995:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 996:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 997:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 998:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 999:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1000:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1001:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1002:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1003:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1004:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1005:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1006:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1007:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1008:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1009:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1010:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1011:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1012:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1013:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1014:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1015:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1016:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1017:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1018:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1019:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1020:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1021:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1022:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 1023:0xffffffff
Dec 28 13:03:05 localhost kernel[0]: 0xaeba99b7
Dec 28 13:03:05 localhost kernel[0]: ** ASIC Hang Log End **
Dec 28 13:13:02 localhost kernel[0]: ATIRadeon9700::waitfor_rbspace: Overflowed block waiting for FIFO space. Have 2, need 5. RBBM_STATUS 0x8401c100
Dec 28 13:13:12 localhost kernel[0]: ** ASIC Hang Log Start **
Dec 28 13:13:12 localhost kernel[0]: 0x01004e48 4f000207 00000007 20080178
Dec 28 13:13:12 localhost kernel[0]: 0x13c280a4 c0003a0c 00000002 00000008
Dec 28 13:13:12 localhost kernel[0]: 0x80000003 0000001f 00002a2a 8401c100
Dec 28 13:13:12 localhost kernel[0]: 0x00000002 00100000 51b3a220 40000000
Dec 28 13:13:12 localhost kernel[0]: 0x60000000 0002000a 0008bbbb 00000000
Dec 28 13:13:12 localhost kernel[0]: 0x00000003 0000444f 10031004
Dec 28 13:13:12 localhost kernel[0]: 0:0x000101ce
There was a lot more of this but i dont want to spam the thread
This is the interesting bit...
" Dec 28 13:03:05 localhost kernel[0]: ** ASIC Hang Log End **
Dec 28 13:13:02 localhost kernel[0]: ATIRadeon9700::waitfor_rbspace: Overflowed block waiting for FIFO space. Have 2, need 5. RBBM_STATUS 0x8401c100"
Any ideas ...please dont just say"Buy a new card" i would really like to get to the bottom of this...if it turns out that my card is fried then fair enough
Quick silver 2002 Mac OS X (10.4.8) processor upgrade to 2Ghz gigadesign 7A</

I'm getting exactlly the same error. This occures after several weeks of sudden & spontaneous shutdowns. And now I get this error whenever I try to launch W.o.W.
Feb 25 07:41:52 drive-0 kernel[0]: ** ASIC Hang Log End **
Feb 25 07:41:53 drive-0 kernel[0]: ATIRadeon9700::waitfor_rbspace: Overflowed block waiting for FIFO space. Have 2, need 5. RBBM_STATUS 0x80016100
Feb 25 07:42:04 drive-0 kernel[0]: ** ASIC Hang Log Start **
Now, my card is actually a 9800 Pro. I think it's something to do with OpenGL. I'm gonna try to launch other apps that access OpenGL directly and see what I get.

ATI Radeon1900 XT vs ATI Radeon 9800 Pro + 30" Cinema Display

I bought a used G5 2.5 quad (PPC). It has two graphics cards one is an ati radeon x1900. In order to use my cinema display with this card I have to have that cute extra little white power supply box, oh joy! My G5 1.8 single has a Radeon 9800 Pro and the 30" plugs right in without need of xtra power supply. Can I switch the 9800 in the 1.8 single and the x1900 in the 2.5 quad? Isn't the 9800 Pro a better graphics card than the x1900 anyway? I don't mind using the power supply on the 1.8 as I won't use it that much any more anyway and prefer less "stuff" on my main "new" unit. Most of my work involves flash, photoshop and FCP.
Advice on this would be much appreciated. (PS. Leopard really ROCKS, just got it!)

Thanks tons for you help. I hadn't opened the machine up yet to see what the heck, or done any research on the quad in regards to slots, guess I was too excited about SPEED! The card/slot type would definitely pose a problem. Good thing I had a spare power supply around for the monitor! Thanks for the input on the quality of the card. I don't know my p's and q's around monitors and cards so I really didn't know what I was looking for in regards to this.
Thanks Again.

[Athlon64] MSI K8T NEO-V : incompatibility with ATI RADEON 9800 PRO

Hi,
I read all the subjets on this forum about Radeon problems with MSI K8T NEO motherboard. Most of the peple can't use their graphic card in all situations.
My PC is :
-MSI K8T NEO-V
-AMD-64 3200
-Power : 400W
-ATI RADEON 9800 PRO
-1 Go DDRAM (2x512 in single channel)
-Hercules Digifires 7.1
I bought a new MSI K8T NEO-V with AMD 64.
The problem is that I can't use the computer in the games with AGP 8X even if I try to enable-disable all the options possibles in BIOS and Windows (fast write ...) : The computer freeze (screen disapear as if there was no video signal), reboot or return to Windows disabling the accelerated mode.
But in AGP 4X, all the game run without problem with all setups of BIOS !!!
I tried all the drivers (the new and the old drivers). Even if all are updated, it freeze.
There are no BIOS update for my motherboard. I saw that some people had BIOS update for compatibility with some Radeon cards ...
So, I don't know how to repair the problem because AGP 8X is AGP 8X and not 4X, and my Radeon run fine on other computer, and nothing say that Radeon 9800 pro don't run on this motherboard.
Does someone have the solution to make it work ? Does a new BIOS or driver update exist somewhere for Radeon cards ?

What Bas said about 30+ amps on the 12v rail does have merit. Even if you don't use it now there may come a time when you want to upgrade the system and certainly you won't want to buy yet another PSU then. A High end vid card now takes almost as much as the CPU to operate. Now days the 12v rail is the most important. Past systems regulated everything off the 5v railk and 12v was used mostly for powering drive motors. Now though the MB's use the 12v line to regulate all the voltages for the CPU, Chipset and other features as does the Vid cards. 3.3 volt lines are used for memory so we hardly use any 5v nowdays.
You have an older viod card and that does not eat much 12v but if you upgrade the most likely peice will be the vid card. You could go through this whole thing all over again if you are not careful to plan for that now with a new PSU purchase.
If the computer shop gives you a bunch of bull about power needs havbe them stop by the forum and we can help set them straight on this. There is more than enough data from MSI and historical data here that suggests that 16a on the 12v rail is certainly not enough. Hey I am not trying to sell you anything. I am just trying to help you get it right. The computer shop is the one trying to sell you something we just feel they are selling the wrong junk.

875P INF Drivers and Radeon 9800 Pro All in Wonder

Please help; I am at my absolute wits end. I will try to be brief but I doubt that there is much chance that it will be. Basically I have narrowed things down to this. My video card is a Radeon 9800 Pro All in Wonder 128mb version. My motherboard is a MSI 875p. Lately I realized (long story not important) that I did not have the inf drivers from intel installed for my mobo. This seemed to make sense as to why I was having display issues in games; IE Morrowind. So I installed them, and when I rebooted I was pleasantly surprised to find that the monitor would simply turn off right before I could get to the login. Now I have reinstalled windows several times and installed several different combinations of intel inf updates with different version of the Catalyst drivers. Pretty much, if I have the INF drivers installed, I will not be able to get into windows. However, if I don't have them installed (like right now) normal things, like typing this message, I can do, but I can't play any games . From what I have read I am thinking that it is one of a few things. A, it has something to do with the AGP driver/ and voltage setting things. Many people were talking about issues like this with the 9600, and 9800 pro (not all in wonder). So there might be some bios settings that would help; though I have no knowledge of how such things work. B, is that the card is just a dud and I should just give it up and try to send it back in. I am afraid of option B mainly because I know it will take forever, and then I have no comp, and because of dreaded option C. The motherboard is simply incompatabile with the Radeon 9800 Pro All in Wonder 128mb version. Please let me know if anyone has had similiar problems, if I am up a creek, or how to set the bios... Here is my system specs; I will check back to see if I need to add anything. Thanks a bunch.
p4 2.6gigahertz
MSI 875P
1gig ram kingston hyper x
120gig western digital harddrive
21' Viewsonic
Radeon 9800 Pro All in Wonder 128mb
Sound Blaster Audigy 2 Platinum
Antec Performance Plus SOHO File Server Case ATX12V
(There doesn't seem to be anything in the Bios updates that will help me luckily, because I want to avoid flashing it if I can.)

Okay, I will try to answer any questions as they came. First off, Windows XP Professional is what I have. I tried to install the video drivers with both the inf update from intel, and the one from MSI installed. Again it crashes at login screen with any sort of inf update (ie agp drivers) installed. Radeon is running at 4x with fast writes disabled, however there is one interesting thing I learned Another thing to note about the problem is when I got to the ATI SMARTGART advanced settings little program (within the ati folder under program files) I can see that PCI write, and read are both on, and AGP read and write are both off. I am not a genius in relation to computers, but how could this card be acting as a PCI card, when it is installed in a AGP slot? Is this because since I don't have the inf update installed, so as far as the computer knows that agp slot is a PCI one? A further thing to note is that whenever I install the video card driver for my All in Wonder 9800 Pro, is that it installs two cards from what device manager shows. One is "ALL-IN-WONDER 9800 SERIES" the other is ALL-IN-WONDER 9800 SERIES - Secondary". According to device manager they are both located on PCI Bus 1, device 0. Disabling one or the other does not seem to make difference. A final thing to note is that I took an All in Wonder 9000 out of a friends comp and put it into my with the inf update installed; it booted windows and detected it fine. Does this mean my card is a dud and needs to be sent in for repairs, or is there some kind of voltage issue? As for other PCI cards, I have a modem that is not even installed at:
PCI Slot 2 (PCI bus 3, device 1, function 0)
Sound card at PCI Slot 3 (PCI bus 3, device 2, function 0)
Again Video Card (PCI bus 1, device 0, function 0)
The onboard Gigabit Ethernet is at (PCI bus 2, device 1, function 0)
Another thing that might help clue someone in is that I have
Standard Enhanced PCI to USB Host Controller
Listed 5 times; IRQ's are 23, 16, 19, 18, 16
The IRQ of my All-In-Wonder is also 16 if this means anything. No conflicts listed of course. Another note is that my onboard ethernet's irq is 18, same as one of the usb host controllers, and it works fine...
I can't think of anything else to add, let me know what you think. Thanks a ton so far guys.

Having trouble with my G4 MDD 867MHz DP and ATi Radeon 9800 Pro video card.

I just recently purchased the ATi Radeon 9800 Pro Mac edition card on ebay. I installed the card on my G4 and turned it on thinking everything would work with no problems, but when I turned it on the grey apple screen came up fine and then it changed to a sky-blue screen with nothing on it and remained on that screen. My desktop or any of my apps did not load up at all. I reset the PRAM and the NVRAM as the seller I bought the card from instructed me to and still I get the same result. Is anyone familiar with this problem? I was wondering if my monitor was the problem because I'm using a Dell LCD monitor as the display for right now? I need help! I'm trying to get this up and running so I can start editing. Whatever information anyone can give me will be greatly appreciated!

Sometimes display cards that support multiple displays (or a second display card in the same Mac) can cause the display you are using to be the SECOND display in a multiple-display "extended desktop".
When this happens, the MenuBar and cursor may be drawn perfectly, but be on the "other" screen, and it is very difficult to determine what has happened. \[This problem is sometimes caused by inadvertently leaving an adapter or cable on an unused display port.]
Try moving the mouse many times to the right to see if the cursor suddenly transitions onto your screen, then try the same experiment to the left.

Digital Audio G4 and Radeon 9800 Pro

Has anyone had the same fuss w/a Digital Audio and ATI Radeon 9800 Pro Mac Edition? Been through about 5 cards (lost count somewhat) and constantly getting a display of the video card (with its power connector flashing red) on a black screen. Only by opening the box and reconnecting the power connections, and sometimes reseating the card, do I get successful results, with the Mac booting properly.
No other card (others that I use do not require an additional power connector like the 9800 does) seems to have this problem; all boot properly.
There is a Sonnet 1.8 Ghz Dual CPU upgrade, 2 internal hard drives, a raid card, and FW 800 and FW 400/USB2 cards, but additional power connections for those have been unplugged. I'm good with letting any external devices run on their own power.
Thanks much, to anyone that may have a suggestion or a solution.

Hi-
With regards to the connector graphic, this invariably means that there isn't power connected.
State the obvious, but, have you tried pulling power from a different connector? Maybe try a new extension........ Molex connectors can work loose from the cap, and slide back when attaching to a device. This would give the appearance of being connected, though in reality, otherwise.
Have you tried without any of the PCI cards installed? I wouldn't want to remove the processor, either, though the dual does pull some power at boot. The DA PSU, however, should be able to handle both the processors and the 9800..... unless the PSU has a weak 12v/5v/3.3v rail....
Pulling the PCI cards will clear up whether or not the problem is with power in the PCI bus.
As for posting a picture, you need to host the picture at a site like Photobucket or Imageshack. Then, place a link (produced at the host site) in your thread.

Aperture and ATI Radeon 9800 Pro Mac Special Edition

I have noticed a few people on this board have the ATI Radeon 9800 Pro Mac Special Edition (256MB- G5 only) listed on thier specs on the bottom of posts
so I was wondering what your experience using this card is like with Aperture, even-though it I realize that it is not the current top of the line card ?
How about a rating from 0 to 5 stars where 5 would be the best currently available.
Robert
P.S lets not get into a p**** match over what IS the best video card for Aperture; I am just looking for subjective views on THIS card!

I have noticed a few people on this board have the
ATI Radeon 9800 Pro Mac Special Edition (256MB- G5
only) listed on thier specs on the bottom of posts
so I was wondering what your experience using this
card is like with Aperture, even-though it I realize
that it is not the current top of the line card ?
How about a rating from 0 to 5 stars where 5 would be
the best currently available.
I have just the card you mentioned.
I think how happy you'd be with it depends on what kinds of files you are using. I work with TIFF files because my camera is not supported, and performance with those is better than with true RAW files.
I generally do not see much delay but a few adjustmnet tools (Shadows & Highlights & Spot/Patch) can get a bit pokey.
Honestly if I were upgrading my card all over again I would bit the bullet and get the x800XT, which I am mulling over even now... I was hoping it might drop a bit more in price but it does not seem to be doing so.
If you want an absolute rating I guess I'd give it three stars, though again that is with the files that I use. For other larger RAW formats like D2H files and such, I think it's more of a two.
One last thing to note is that I have not tired other raw formats since the update, so it might be upgraded from a two... I was waiting to see what kind of speedup Aperture 1.1 offered in addition to just the system update. I'll report back when that update comes out.

K7N2 and Radeon 9800 Pro Prob..

I work at a computer store in Killeen texas and am having an issue with the K7n2 Mobo. When we use a Radeon 9800 pro from ATI, we do not get video on every boot. The system will go itno windows but will not show a post screen or windows. This only happend with version 3.4 of the bios. We downgraded to version 3.3 And the card worked perfect. Their is a new 3.5 Bios. Was wondering if I should upgrade to this bios or Leave it at 3.3. By the way....We tried three other K7n2 boards and two different Raddy9800s. We also had a similar prob with the All in wonder 8500. And again version 3.3 of the bios worked fine. Any Ideas....

leave it at 3.3 as its not changed
but its not all boards and all ati its wierd

Hello, I purchase a radeon 9800 pro 128mg, I have a mac G4 (Double mirrors) I am replacing the old Radeon 9800 pro 128mb. I am using 10.4 TIGER. I installed the card and I am still getting a black screen. my monitor works on my g4 powerbook desktop Help?

Question #1
Hello, I purchase a Radeon 9800 pro 128mb from ebay. I own a mac G4 ( double mirror doors) I am using tiger10.4 I am replacing my old radeon 9800 pro 128mb with one from ebay. I installed the card properly but I am still getting a black screen. why? Monitor works on my powerbook G4 laptop.
QUESTIN #2
Can I upgrade my hard drive to a 2tb with the proper PCI card and cable ?

#1, tough to tell, is it using the VGA or DVI output?
#2, yes, if you can find a Mac compatible card.

Quicksilver 733 and Radeon 9800 Pro 128MB

My dad just purchased a new iMac for himself and he's given his older Quicksilver 733 to my nephews. I'm trying to setup this Mac so the kids can use it to play games like Battlefield 1942, Command & Conquer, Star Wars Galatic Battleground, etc.
The Quicksilver has 1.12 GBs of RAM and a new 350 GB Seagate SATA hard drive with controller. I just installed a flashed Radeon 9800 Pro w/ 128MB of VRAM, but for some reason the computer still seems sluggish.
I'm currently running Mac OS X 10.3.9. I also noticed that in the ATI Utility shows the Radeon 9800 Pro's profile, but it doesn't indicate any refresh rates, which is odd. What am I doing wrong?
Thanks,
Kelly

I also noticed that in the ATI Utility shows the Radeon 9800 Pro's profile, but it doesn't indicate any refresh rates, which is odd.
You will only have refresh rate options with VGA monitors.
DVI monitors all default to approx. 60Hz.

Radeon 9800 pro and msi

Similar Messages

Maybe you are looking for