[Radeon] ATI Radeon X800XL - AGP

I have a Power Spec 8960
AMD 64 3400+
Windows XP Home
1 GB DDR333 SDRAM
250 GB Hard Drive
Via S3 K8M800 Unicrome Video Driver
I upgraded Video Card, Sound Card and Power Supply:
Video: ATI Radeon X800XL AGP
Sound: Sound Blaster XFi
Power: True Blue 2.0 (480 v.)
Since the video card upgrade I have had so many crashes, screen black outs and random restarts. All with new and interesting messages like:
Your computer has recovered from a serious error. or
VPU recovery. Restart for new video settings.
and sometimes my PC will just short out no beeps.
I have formated my hard drive and reinstalled all components, more than once. I have rolled back the drivers. I have tried the system without the new video card and everything seems fine.
I should say that the system can run fine for an hour and then bam! It seems like it happens when 3D graphics come into play.
Please any suggestion would be greatly appreciated.

Did you completely remove the old video card drivers?I would try this.download driver cleaner----http://www.drivercleaner.net/
Download the Omega Drivers-http://www.omegadrivers.net/--Radeon Omega Drivers 2.6.83 (Catalyst 5.11)
Go to add/remove programs.Remove the catalyst control center,dont restart.Remove the Video Card driver.Restart in safe mode.Then run the driver cleaner for ATI.Restart in normal mode.Install the omega drivers.Set everything up and then see what happens.I had poor performance with the ATI drivers.I used the omega drivers and it was like night and day especially using open-gl.

Similar Messages

Will the ATI Radeon 700 AGP card run two Studio 21 Displays?

I just bought a G4 MDD 1.4 GHZ Mac that has what I assume was the stock video card, which appears to be for LCD displays, since the cables from my Apple 21" Studio displays (CRTs) don't match up to it (those are called VGA monitors, right?).
On my present Mac (G4 Quicksilver) I am running both of these 21" Studio Displays, one plugged into the stock AGP card and the other connected to a PCI video card. As I prepare to switch over to my "new" MDD Mac now, I need to figure out how best to run the two monitors with this G4. (I will leave the video cards in the old Quicksilver and give it to a relative who also wants to run two monitors with it).
I notice a new Radeon 7000 AGP card being offered on Ebay which has one VGA port, and they provide an adapter so that the second (DVI) port can also run a VGA monitor. If that card would run both my 21" Studio Displays independently as claimed, it would be the ideal solution, if the performance is adequate.
I do lots of Photoshop(CS2)adjustment of digital camera images and also make video movies with Final Cut Express, iDVD, etc., with both monitors set to 1152 X 870 at 75 Hertz. Would such a card as this one be up to the task with both monitors?
Every time I try to post the link to the Ebay auction for this card, everything in this text box disappears. So I'll just copy and paste the description of the card from the auction: "ATI Radeon 7000 64MB DDR Dual Monitor capable AGP Video Card with VGA, DVI-I, and S-Video Out and a DVI to VGA adapter. The video card has ATI's latest firmware (v226) with the latest ATI Displays support. It does not have any sleep issues. The card is capable of dual true independent/simultaneous monitor support with extended desktop. The adapter allows for dual VGA operation. This model has been tested in a G4 Tower, G4 Cube, and G5 with several versions of OS X including OS 10.4/Tiger. This card is guaranteed to work in any Macintosh G4 Tower, G4 Cube, or G5 Tower with OS 9.2.2 or later that has an available AGP slot."
Sounds good---maybe too good to be true. Any drawbacks to such a setup as this?
Any advice most appreciated.
Tom

Thanks for the info Malcolm. I checked out those links you provided, and it appears that buying two adapters for the presently-inistalled video card which would allow it to run two VGA monitors looks like a workable solution, all right. But it would be more expensive than just buying that Radeon AGP card to run both monitors, if the latter would work (that's what I'm still wondering).
Also, I notice that the DVI to VGA adapter sold by Apple has some poor reviews and seems to have glitches. It is reported by several people to be unreliable and seems to turn a lot of displays magenta, and in other cases requires a lot of wiggling or careful positioning to make it work right. Sounds like Apple needs to work on the design.
I appreciate the info, but I'm still favoring the Radeon 700 AGP card if someone can tell me it might work.
As to which card my Mac has in it right now, I can't tell just by looking at it (why don't they put an identifying sticker or something on the things?) and I can't connect any of my VGA displays to it yet to let the Mac report what it has in it, so it's still a mystery.
Thanks again,
Tom

ATI/Radeon 9800 Pro 128 AGP 4x/2x in Gigabit Ethernet dual 450 PMac G4

Hi,
This is my first time posting to these discussion group... I've been going through related threads and have not found an answer to my problem...
I have a Gigabit Ethernet dual 450 G4. Awhile ago I upgraded the processor to a Sonnet 1.8ghz so I could run Leopard.
I just bough the ATI/Radeon 9800 Pro 128 AGP 4x/2x video card. I researched around and that seemed to be a card that would work in my machine. I even read a review on Amazon where someone had also upgraded to the 1.8 processor used this card with no issues.
I do have an older monitor - Apple Studio Display CRT with the ADC connector. So I also bought the Apple DVI to ADC adapter kit.
I installed the card and do not get any picture at all - I believe I have installed everything correctly. I'm pretty sure I can hear the fan on the video card in the machine. The monitor is getting power from the adapter since the button lights up when I press it - but it does not stay lit -- the monitor never turns on. Using my old graphics card the monitor makes a little "beep" when it turns on.
In reading the other topics I am wondering if it might be a power issue? According to Other World Computing's profile my machine has a max of 220 watts. Although they suggest this video card as one the will work in my machine.
I have disabled the hard drive that came with the machine (too small) and am using two Maxtor hard drives that I added - one ATA (120gb) and one SATA (500gb) that is connected to an SATA pci card. I also have two additional pci cards with usb 2.0/firewire ports.
In looking at the topics here I came across the link about taping the 3 and 11 pins on the video card. Even though the card I have is 4x/2x not 8x I thought I'd give it a shot. That did not work either.
Any help you can give would be greatly appreciated.

I don't wish to sound redundant here, but I've been reviewing the vendor's page:
It's OK- I don't mind beating this dead horse....
The maker says such to protect themselves from possible claims that may arise due to over loaded systems and power problems when their card is installed in said system.
Of course, 300w would be nice, but they didn't even specify the PSU rating a couple years ago. The Sawtooth, with it's 237w PSU, used to be listed as a compatible machine for the 9800...... They just didn't consider how far a Sawtooth might be modded.
Within reason, the early G4's (Sawtooths) are capable of using the Radeon 9800 Pro. The GE has the same 338w PSU as the DA (they are interchangeable), so there is plenty of power for the 9800.
One thing to remember, the requirements of the ADC port of the AGP slot are removed by using a non ADC card. This really changes the calculations of the power available.
It's kinda' a long post, but, if you care to get ALL the details, check the following:
http://discussions.apple.com/thread.jspa?messageID=7065653&#7065653
I think you'll be satisfied with the explanation.......
Which leaves your second, and very appropriate, point.
The main enemy of all, though, isn't power. Heat is the biggest concern.
Reducing heat/increasing cooling by using a third party fan on the 9800 is highly recommended. The 9800 is a hot card, and the stock fan is prone to early failure.
Adding additional cooling to remove the extra heat produced by the 9800, by using an exausting PCI fan, will also help the PSU provide adequate voltage to the system, by reducing the amount of hot air moving out of the PSU.
Super heated air moving through the PSU reduces the cooling ability of the PSU. A hot PSU doesn't produce reliable power.
So, add the 9800, add some cooling, and enjoy!

3D accelaration in ATI Radeon AGP 320M

hi, does anyone know how I can use my ATI Radeon AGP 320M graphic card to accelarate 3D graphics? I tried fglrx, but the mdule won't load, the error message was something like "device not found".
are there any free drivers I can install via pacman and/or enable via xorg.conf?

Try here - http://wiki2.archlinux.org/index.php/At … rnel%202.6

ATI Radeon 9600 Pro 256MB 8x Dual (DVI/DVI) (AGP) Video Card for PC/Mac

We want to be able to use our 30" cinema display from the G4 and was advised in a previous discussion to buy the ATI Radeon 9600 Pro 256MB 8x Dual (DVI/DVI) (AGP) Video Card for PC/Mac. It doesn't seem to be available anywhere. Does anybody know of an alternate video card that's currently available that will get us there? (We had the display running from a G5 that quit / logic board failure).
Many thanks,
Philip

The Nvidia 7800GS is a flashed card, runs a 30" with ease.
BruinMacs on Ebay is a great place to get one, you support the guy who wrote the original ROM for these.
He doesn't seem to have any for sale right now, but if you email him, maybe he will list one.
There are also flashed X800s that work on your MDD and can run a 30". They are pricey but will offer dual DVI while the 7800GS is single DVI with VGA for second display.
There are also flashed 6600GT AGP cards which will work, but harder to find.
Any of the above 3 will run circles around a 9600.

What is the correct installation sequence for my ATI Radeon 9800 PRO MAC AGP 128MB into my Quicksilver 867 G4?

Hi.
I just got my used ATI Radeon 9800 PRO MAC AGP 128MB card.
What is the correct installation sequence into my Quicksilver 867 G4 running 10.4.11 on one drive 10.5 on another?
The original NVIDIA GeForce2 MX - 32MB SDRAM went bust.
Is the driver build in 10.4?
Do I remove the old driver?
If I need to install the driver that came with it, (10.3.6) should the card be installed first?
What about firmware updates?
Thank you for all your time and patience.
W.W.

I think it's the card, but here are some files that may affect it...
/Users/YourUserName/Library/Preferences/ByHost /com.apple.preference.displays.<12digitHex#>.plist
/Library/Preferences/com.apple.windowserver.plist
/Users/YourUserName/Library/Preferences/ByHost/com.apple.windowserver.<12digitHe x#>.plist
/Users/YourUserName/Library/Preferences/ByHost/.GlobalPreferences.<12digitHex#>. plist

K7N420 Pro AGP ATI Radeon 7200

Hi,
This may sound like a stupid question to many - forgive me my ignorance.
I have a K7N420 Pro and I was thinking of fitting my ATI Radeon 7200 (64MB SDRAM). This is a "3 Golden fingered" AGP card 3.3V and 1.5V 2x/4x compatible.
I noticed my motherboard's manual says that only 1.5V AGP cards can be used.
All I really need to know is, can I fit this card to my MoBo without damaging it - Electrically (I know it fits physically).
Any help you can give me - greatly appreciated.
Thanx in advance
AxelUKToo

Hello Again
Actually I did use the onboard video - and found that text on screen (WinXP) was barely readable - my Radeon however has no such handicap.
Thanx for posts so far
:P

Graphics card for PM G5 AGP-ATI Radeon 800 vs Nvidia Geforce 6800

Any comments as to which of the two cards ATI Radeon 800 vs Nvidia Geforce 6800 is better suited for Photoshop-Aperture work?
I need to upgrade from a Nvidia 5200 that does not support Aperture and want to support at least one 30" + one 23" Apple cinema displays.
My PM is an AGP one, so these are the two high end contenders on the retail market.

I have the 6800GT, which works fairly well for me. I think the X800 is overall a slightly faster card, depending on what is benchmarked. Here is something you might want to look at:
http://www.barefeats.com/radx800.html
I don't know if you should pay more attention to the gaming benchmarks or the Motion rendering benchmark. I haven't seen any Aperture tests of these products. But I imagine if I was upgrading I would probably go for the X800. One thing I like about the 6800GT is it supports two 30 inch monitors. Unfortunately it takes up 2 slots. I have a pair of SATA cards in my Dual 2.5, so there go all my slots.

MSI ATI Radeon X800 SE 256MB DDR3 TV-Out/DVI (AGP) problems

i recently purchased a MSI ATI Radeon X800 SE 256MB DDR3 TV-Out/DVI (AGP)
it says it can automaticlay download new bios etc using MSI live update,
but when i click on VGA Bios, it says my card does not do this??? how do i check the bios and if there is a new one available?
any ideas?
ive heard you can unlock the MSI ATI Radeon X800 SE 256MB DDR3 TV-Out/DVI (AGP)
from 8 pipes to 12 pipes, how do i do this
also any idea on what the best drivers are for a MSI ATI Radeon X800 SE 256MB DDR3 TV-Out/DVI (AGP)
catalyst?
omega?
MSI std drivers?
thanks

Jobbie,
The best Drivers for your Vid Card are the ATi Catalyst Drivers.
Take Care,
Richard

MBO MSI 645 Ultra and Ati Radeon x1650pro 512MB agp

I tried to upgrade my comp. with new graphic card Ati radeon X1650pro, 512Mb, AGP. X1650pro works great 3 days and then colapsed. When I became a new one from shop, It hapen the same: work great 3 days and then colapsed. I dont know what to do. I have old MBO MSI 645 ultra, intel pentium 4 on 2,4 Ghz, 1280 RAM, 80Gb + 120Gb hard drives, Samsung DVD player and LG DVD-RW... I think this motherboard dont support Ati Radeon X1650pro graphic card. I have before Ati Radeon 9600pro 256Mb and it work perfectly. Dont tell me that its time to buy all new (MBO, procesor, etc...) Regards from Croatia...

If you place Ati 9600 back in system, is all OK?
Could be faulty 1650pro card...........
Please couls you list all components in your system.........

K8MM-ILSR PROBLEM with ATI Radeon 9550 of 256MB AGP port 8X...

Hello, I have a motherboard MSI-K8MM-ILSR, when use the onboard video card works correctly, but the problem begins when I install a ATI Radeon 9550 of 256MB, is AGP port 8X and has its dissipator, in other machines it works well and your temperature is ok. My monitor is Samsung Sync Master 793s at 75 Hz. The Problem is the following: the machine crash and the video is distorted and it is congealed, this happens after playing a little, the video card drivers are updated (Catalyst 5,6), I'm use Windows XP Service Pack 1, Thanks... and excuse me my English...

Some other options you can try:
- uninstall the previous vid-drivers and use driver cleaner software to uninstall everything
- disable onboard video in the BIOS;
- set fastwrite to disabled/no (if it's there)
- set AGP Aperture Size to 128 (if it doesn't do anything, go to 64);
- set AGP port to 4x.
- Start hoping .... good luck!
(BTW, the last two options may cause your system to operate slightly slower, but it's hardly worth mentioning ... )

K7-Master 6341 &ATI Radeon 7500 4x/"1x2x" AGP Video Issue (XP Crashes

I know the K7-master is old.... but maybe someone will know how to help me keep my PC from crashing if I put the bios setting on 4x instead of 1x/2x. Thanks.
System: MSI K7-Master (MS6341)
BIOS V. 1.5 (Newest)
OS: WindowsXP(SP1)
CPU: AthlonXP 2000+ Model 6
AMD AGP Miniport V5.33 Installed
Radeon 7500 AGP 64Mb
Video Drivers V6.13.10.6166
Display Driver V7.76-020815b-005727c-ATI
Control Panel V6.13.10.3027
Catalyst V02.3
Clean XP install.... no software... only AGP Card in Machine... no PCI or other cards.
Card Bought New in Box
Issue: WindowsXP crashes on boot (apprx 4seconds into loading desktop)and recovers to largest resuloution 640x??? 4 colors if BIOS setting for "AGP Data Transfer Mode"="4x" If BIOS is set to "1x/2x" system boots and runs without error.
ErrorMessages: "Windows has revovered from a serious error" Possible cause "ATI Radeon 7500 display driver" Sent to Microsoft with no help back from Microsoft.
Current System Bios Settings and Values.
"Video BIOS Shadow" = "Disabled" (Possible Settings, Enabled-Disabled)
"System BIOS Cachable"="Disabled" (Enabled-Disabled)
"Video RAM Cacheable"="Disabled" (Enabled-Disabled)
"Memory Hole at 15M-16M"="Disabled" (Enabled,Disabled)
"AGP Aperture Size MB"="64" (32,64,128,256)
"AGP ISA Aliasing" = "Disabled" (Enabled,Disabled) I dont know what that is anyway.
"AGP Secondary Lat Timer" = "20h" (00h,20h,40h,60h,80h,C0h,FFh)Unknown what this is too.
"AGP Fast Write"= "Disabled" (Enabled,Disabled)
"AGP Data Transfer Mode" = ("4x" Crashes & "1x/2x" No system crash)
"Init Display First" = "AGP" (PCI Slot,AGP)
"PNP OS Installed" ="YES" (No,Yes)
"Resources Controlled By"= "AUTO ESCD"
"PCI/VGA Palette Snoop" = "Disabled" (Enable,Disable)
I know this is alot of information I just hope you can help me get my ATI Radeon 7500 transfering at 4x bus speed. I know the card is "older" than the super powerful ones but I want to get everyting out of this card I paid for. I thank you in advance for your help. Please let me know if you need any more information.
Thanks,
Dan

Quote
Originally posted by nutt2118
Here is part of the message from ATI about this problem that I need help with.
"Try lowering the AGP support (i.e. from AGP 4X to AGP 2X). If this resolves
the issue, you may consider contacting the motherboard/chipset vendor for more
information regarding the GART support available on the motherboard/chipset."
Does the MS-6341 K7-Master support "GART" and what is "GART"
Thanks,
Dan
I returned my Nvidia GeForce4 Ti4600 PNY Verto back to PNY last year, after I had it for a few months, and it kept crashing at AGP 4x. They sent me a new one, I tried it at 4x, with the latest Nvidia Detonator drivers, I have tried it under fresh installs of Windows 2000 SP3, and WindowsXP, both crashing when the card is set to 4x. I believe there is major bugs in this board and it does not truly support AGP 4x. I am goin to try and RMA my board back to MSI, demanding a board that can support my card, or a suitable replacement that will support my current CPU and memory. This is the first MB I ever bought from MSI, and depending on how they resolve this situation, it will probably be the last. This is the 10th machine I have built on my own, I have just not had to time to deal with this issue, and have dealt with it at AGP 2x, but it is slow as hell, especially with games like Battlefield 1942.

Will the mid-04 AGP 2.5 DP work with PCI-X graphics (ati radeon 7000?)

Got a G5 with a burnt out AGP slot, will it work with this? ---->http://www.ebay.com/itm/Apple-Mac-G4-G5-ATI-Radeon-7000-PCI-64MB-Video-Card-DVI- VGA-S-Video-TV-Out-OS9-/200710223413#vi-content

Okay now is there any possible fix? I just turned it on and it the display came up just fine. But then I tried to boot it off of my powerbook from firewire and no show.I don't have it screwed down because I have been swapping cards but should I try that or are there any other suggestions?

BIOS AGP setings for MSI6712 (KT4V-L) using ATI Radeon 9600XT video card ?

Because I am having graphic issues with Battlefield-2 since the new patch, I want to know what should be the BIOS AGP setings to go accordingly with my ATI Radeon 9600XT video card ?
I have all or part of the following BIOS AGP setings below. I picked this up on the net but I don't recall all the values I have as I am at the office right now.
**AGP timing Control**
AGP Mode: 8x <== that's what I remember having
AGP Fast Write: Enabled <== that's what I remember having
AGP Aperture Size: 256 MB <== that's what I changed it to yesterday
AGP Master 1 W/S Write: Enabled <== that's what I remember having
AGP Master 1 W/S Read: Disabled <== that's what I think I have
AGP Read Synchronization: Disabled <== don't remember what I have
PCI Delay Transaction: Enabled <== don't remember if I have it

I still don't think this is mobo thing. Please use the Internet. There are lots of people having problems with the patch you mention.
One thing I come across is that you should install something called Special Forces b e f o r e you install the patch.
This is in your favourite language Swedish , it took me too long to find in English, but maybe you can find some search criteria for your own Internet search:
http://64.233.183.104/search?q=cache:ISNg7CPnQaQJ:forum.directconnect.se/archive/index.php/t-8074.html+patch+1.12+Battlefield+2&hl=sv
Adding: When searching for software or hard ware solutions to a problem, just add "problem" in the Search-for-box".

Zen Kernel and new ati radeon oss driver

Hey together!
A few days ago I get new ati-driver from testing and since then, I can't start the xserver with the zen kernel and ums. I can use the normal kernel 2.6.33 normally.
Here is my Xorg log:
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-ARCH i686
Current Operating System: Linux linux-laptop 2.6.33-ZEN #1 ZEN SMP PREEMPT Fri Mar 5 13:29:19 CET 2010 i686
Kernel command line: root=/dev/disk/by-uuid/5394d0b7-4952-4f87-87bc-a4762f73b8c4 ro quiet
Build Date: 18 March 2010 07:32:34PM
Current version of pixman: 0.16.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 19 14:12:54 2010
(II) Loader magic: 0x81e4c60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 7
(--) PCI:*(0:1:0:0) 1002:5653:144d:e003 ATI Technologies Inc Radeon Mobility X700 (PCIE) rev 0, Mem @ 0xd0000000/134217728, 0xc0100000/65536, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default ati Device 0"
Driver "ati"
EndSection
Section "Screen"
Identifier "Builtin Default ati Screen 0"
Device "Builtin Default ati Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default ati Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default ati Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default ati Device 0"
(==) No monitor specified for screen "Builtin Default ati Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AutoAddDevices.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 6.12.192
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.7.5.902, module version = 6.12.192
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750,
ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650,
ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
ATI FirePro M5750, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4290,
CYPRESS, ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5900 Series, ATI Radeon HD 5900 Series,
ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 5700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, CEDAR, CEDAR, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, CEDAR, ATI Radeon HD 5450,
CEDAR
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 01@00:00:0
(II) [KMS] drm report modesetting isn't supported.
(WW) Falling back to old probe method for vesa
(II) RADEON(0): TOTO SAYS 00000000c0100000
(II) RADEON(0): MMIO registers at 0x00000000c0100000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(II) RADEON(0): Creating default Display subsection in Screen section
"Builtin Default ati Screen 0" for depth/fbbpp 24/32
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Mobility Radeon X700 (M26) (PCIE)" (ChipID = 0x5653)
(--) RADEON(0): Linear framebuffer at 0x00000000d0000000
(II) RADEON(0): PCIE card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom:
SubsystemVendorID: 0x144d SubsystemID: 0x5653
IOBaseAddress: 0x3000
Filename:
BIOS Bootup Message:
M26-P Samsung M26 Firenze ATOMBIOS BR14537/rel9.10.1.0/CL199610
(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0x7ffb000
(II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0x7ffb000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 358000
(II) RADEON(0): Default Memory Clock: 345000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 500000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 200000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 27000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.32.0
(==) RADEON(0): Page Flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=131072K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): PLL parameters: rf=2700 rd=7 min=20000 max=50000; xclk=40000
(WW) RADEON(0): LVDS Info:
XRes: 1280, YRes: 800, DotClock: 68900
HBlank: 128, HOverPlus: 21, HSyncWidth: 32
VBlank: 16, VOverPlus: 4, VSyncWidth: 4
(II) RADEON(0): Skipping TV-Out
(II) RADEON(0): TMDS PLL from BIOS: 16500 b0112
(II) RADEON(0): Skipping Component Video
(II) RADEON(0): Output VGA-0 has no monitor section
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): I2C bus "LVDS" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Port0:
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_DAC1
DDC reg: 0x60
(II) RADEON(0): Port1:
XRANDR name: LVDS
Connector: LVDS
LCD1: INTERNAL_LVDS
DDC reg: 0x1a808
(II) RADEON(0): Port2:
XRANDR name: DVI-0
Connector: DVI-D
DFP1: INTERNAL_TMDS1
DDC reg: 0x64
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 0
Backtrace:
0: /usr/bin/X (xorg_backtrace+0x3b) [0x809f7db]
1: /usr/bin/X (0x8048000+0x54715) [0x809c715]
2: (vdso) (__kernel_rt_sigreturn+0x0) [0x7785e40c]
3: /usr/lib/xorg/modules/drivers/radeon_drv.so (0x77226000+0x83208) [0x772a9208]
4: /usr/lib/xorg/modules/drivers/radeon_drv.so (0x77226000+0x3790c) [0x7725d90c]
5: /usr/lib/xorg/modules/drivers/radeon_drv.so (0x77226000+0x3988b) [0x7725f88b]
6: /usr/bin/X (InitOutput+0x5c8) [0x80ab048]
7: /usr/bin/X (0x8048000+0x1a550) [0x8062550]
8: /lib/libc.so.6 (__libc_start_main+0xe6) [0x7747db86]
9: /usr/bin/X (0x8048000+0x1a2f1) [0x80622f1]
Segmentation fault at address 0x7734f808
Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting
Can anyone help me? Thanks!

When I install an old xf86-video-ati package from 27.02.2010, everything works. So the problem seems to be the new ati-driver.

[Radeon] ATI Radeon X800XL - AGP

Similar Messages

Maybe you are looking for