Radeon card keeps losing signal in games in 8x AGP mode.
I have a problem with my boardand i was wondering if anyone else had the same problem.
i have a MSI K8t Neo2
Athlon 64 3500+ (Venice)
Radeon x850xt PE
1 gig ddr 3200 ram in dual channel
In 3d applications my monitor looses signal so i thin ktis a graphics card failure. It only happens in 8x AGP mode, when i use 4x mode everything is lovely and stable.
I have to keep rebooting and its getting annoying, id rather run my system in 8x mode than 4x mode even if i only gain marginal performance increases.
I have all the latest drivers and bios.
the gfx card has fast writes on and vlink 8x on. the frequency is set at 66mhz. The voltage is set at default ( with higher voltages the problem seems worse)
I am wondering if the problem is related to the Ram as its running in dual channel but the 2 modules are not a matched pair but are by the same manufacturer I belive they run at the same timings.
I know its not the cards fault as i just upgraded fro ma 9700 pro and the same problem occured.
Is this a fixable solution or do i just have to wait for a new bios???
Thanks
Adam
I doubt it. Certain ATi cards are known to be at odds with this board. I suspect it can and will eventually be fixed in Bios but I am not an authority on the matter. If you suspect it's your board maybe the better part of vallor is to contact MSI and explain the issue to them. If they feel it's your board then they will give you an RMA. Some folks have done certain testing on an issue in the past and MSI has sent them a specific Bios version to test out as well. So it is hard to say how they will handle the issue unless you get hold of them.
http://support.msi.com.tw
Similar Messages
-
Please help. My iPhone 4S keeps losing signal (no service) I am with EE orange uk. The phone is only Agee days old. Never had this issue with previous phones.
Same problem!!!
There are many ways to fix it
First you must change the USB cable... Or download new version iTunes bro...
Or if your laptop says " the usb NOT recognize " try to pull up the laptop charger,
It's work for my device, try this bro !!
Im sorry my english is bad!!! -
Airport Keeps Losing Signal!!!
Hi every body!
I'm using a powerbook and a Ibook and i've just installed Apple remote desktop 2.2 but when i'm using it to manage one of my computer.....the airport of the two PWB an IB keep losing signal and i have to reconect it for lots of times.
Does anyone know what happen with it?If you're having the same problem,please share it.....any help would be appreciate.
ibook G4 8oomhz 640mb Mac OS X (10.4.3)First try a channel change on the base station to see if you are experiencing interference.
-
Why does my mini keep losing signal
I have a G4 mac mini and have it connected to my TV, however it keeps losing signal does anybody why?
can you try to fix the problem into a corner maybe, by checking if you can connect to another TV or Monitor, or by exchanging the cable?
-
Keep losing signal & poor speed
Hi
Over the last few days I keep losing my internet connection, I've run several speed tests today connected directly to the router with an ethernet cable & master socket and I'm still struggling to get more than 0.5Mb - usually we average 1.5Mb (Warmwell exchange)
I've tried replacing the router for a brand new netgear as the BT homehub kept losing the signal even at our old address but it's made no difference and over the last 48 hours it's become unbearable.
I've done the test using speedster.btcom, that also shows 0.5Mb.
There are no listed service issues in my area so what's going on?
Cheers,
Andy.Hi Welcome to the forums
Here are some help pages done by CL Keith http://forumhelp.dyndns.org/speed/Speed.html
also post your full hub stats by entering 192.168.1.254 into your web browser address bar and navigate to adsl or use a-z, if netgear enter 192.168.0.1
Can you also post the full results from BT Speedtest speedtester.bt.com
Have you tried connecting to the test socket at the rear of the master socket
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’ -
Sky HD box keeps losing signal but is fixed with a power cycle
Hi all, I'm having issues with my Sky HD box. Every day (recently), I'm having to powercycle the box to get a signal.After the power recovery the signal is fine, so I think the dish is fine. It's seems the the box is losing signal while it's on stand by mode. Any ideas? Thanks in advance Jason
I had this problem too but in the end the solution was for Sky to come out and replace the dish and LNBs, since when the signal has been perfect. I would check what signal strength you are getting - I believe it's in the settings menu.
-
MacAir keeps losing signal
Open System Preferences (from the dock, or under the Apple icon in the menu bar).
Choose "Network". Then choose "Assist me ..." on the bottom. Then choose "Assistant ...". It should help. -
5600FX losing signal during games...
Greetings, any help here appreciated.
During gameplay I seem to lose the signal from my graphics card. As if I had shut my computer down and left the monitor on. After the signal is lost, you can hear the rest of the system hang, random wierd noises and such. This has become more and more frequent lately, though initially after I installed the video card I didn't notice any crashing.
Games that have crashed:
Morrowind(crashes very frequently)
Ghost Recon
Max Payne 2
Diablo2(only a couple times)
Thinking this was perhaps a windows issue I reinstalled windows(and nothing else unnecessary), tried both MSI and NVIDIA versions of drivers with no improvement.
I have swapped my card with my roommates(MSI NVIDIA Geforce4 Ti 4800SE). I have had zero crashes or anything even similar to a crash. My roommate hasn't encountered the loss of signal issue but he has had more crashing to windows issues with my card.
Note I am not an overclocker nor have I done any similar fiddling.
Any Ideas? Just a bad card?
ThanksThe IRQ's XP is claiming, and the order it listed them...For some reason they aren't listed totally in order.
Thanks
IRQ's
0 - system timer
1 - keyboard
3 - com2
4 - com1
6 - floppy controller
8 - cmos/real time clock
9 - acpi
12 - ps/2 mouse
13 - numeric data processor
14 - primary IDE channel
15 - secondary IDE
11 - Intel(R) 82801EB SMBus controller - 24D3
16 - Intel(R) 82801EB USB universal host controller - 24D2
16 - Intel(R) 82801EB USB universal host controller - 24DE
16 - NVIDIA GeForce FX 5600
16 - OHCI compliant IEEE 1394 host controller
18 - Intel(R) 82801EB USB universal host controller - 24D7
18 - Intel(R) PRO/1000 CT network connection
19 - Creative SB Audigy
19 - Intel(R) 82801EB USB universal host controller - 24D4
21 - VIA OHCI compliant IEEE 1394 host controller
23 - Intel(R) 82801EB USB2 enhanced host controller - 24DD -
9800 keeps losing signal displaying sos
My torch 9800 is always displaying sos. I have tried a new sim card, tried rebooting it and manual signal search but nothing work. Help does any 1 else have this problem
Hello ebourneus21,
Welcome to the BlackBerry Support Community.
The following article will provide you with more information regarding the SOS signal on your BlackBerry® Torch™ 9800 smartphone smartphone:
Network status indicator shows "SOS" on the BlackBerry smartphone - http://www.blackberry.com/btsc/KB03448
Thank you.
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)! -
Why do i suddenly keep losing signal strength?
All of a sudden, my signal strength for Airport Extreme keeps falling and disappearing. This hasn't happened before and all connections are fine, the modem and router haven't been moved and my laptop is where it has always been.
Does anyone know why this is happening and what i can do to increase signal strength?
Thank you
ChandniFind out what channel the neighbour's network is on using the Airport Traffic Control Widget and ensure your channel is at least three channels away.
If it is a phone then try your network on channels 1 or 11.
iFelix -
YouView box horribly slow and keeps losing signal.
We've had our box for several months now and have been generally happy with it.
Over the last few weeks though it has become almost unusable. The following problems exist:
It is very slow to respond to commands from the remote. Press a button and nothing happens for several seconds. Then the requested action begins but then freezes again; as an example if I press "3" to change to channel three nothing happens for several seconds. Then the number 3 appears on the screen and again nothing further happens for up to 20 seconds before the channel finally switches over.
The channel guide has become veerrryyyy slooowww... Again it takes several seconds for the guide to appear after which it hangs on"loading" for ages, sometimes for ever.
Finally. Several times a week on switching on from standby an error message tells us there is no signal. And the only way to recover from this is to do a hard power off and switch back on. Once this is done the box is OK for 1 to 3 days before the same fault recurs.
There is no signal problem as verified by other devices that receive the same signal in other locations in the house.
The box is currently virtually unusable and has been so for a free weeks now. It's a shame because up till then it's been pretty good.
How do we resolve these issues?Did you fill in the Contact form as requested?
Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Helpful Post?
If a post has been helpful, say thanks by clicking the ratings star. -
HT4623 I keep losing my wifi signal when I move away from my router on my iPhone 4
I keep losing signal on my iphone4 when I move away from router,I can't seem to get any wifi in another room in house.any ideas
Yes it's the long srew on the top inside the phone wich rely the board with the alluminum chassis oh the iphone 4.
Good luck -
After update my Iphone 4 s to ios 8.1 this device keep losing signal from 3 G and wifi , to fix that is necessary to me turn on and off airplane mode ,
How can i fix this mess from Apple ios 8.1 ??? I do not have this problem before when was ios 7hello...
I am having the same issue here... just upgraded my 5s to 7.1.1 (never jailbroken - factory unlocked) and then boom... NO Service!!! Searching ... that's it. currently using Smart Telecom Sim... at first it was working for me... after 6-7 hours, it started the No Service issue. I cannot send a text or make a call...
I did the steps you have taken but it is still not working... any updates on your end? -
Macbook air keeps disconnecting from internet when going to sleep mode
New macbook air keeps losing Internet connection when going into sleep mode. Have tried deleting and re adding network and adding DNS 8.8.8.8 still is disconnecting.
Also, since Lion update 2 days ago Internet is very sluggish
HELPPPPPP!!!You're not the only one. See here:
https://discussions.apple.com/thread/3704539?start=0&tstart=0
The current fix is to turn off sleep mode or use an Ethernet cable. -
I purchased my IPad in June and it keeps losing the GPS signal why is this?
I purchased my IPad 3 in June and it keeps losing its GPS signal why is this please? I have not been able to use the NavFree or SatVav applications or search google whilst travelling
If you mean adding a GPS receiver into the iPad then no, an iPad can't have it's hardware changed. There are stand-alone GPS units that work with the iPad e.g. Bad Elf GPS receiver (I haven't got one but I've seen it mentioned on here a few times)
Maybe you are looking for
-
I need to visualize a document attached on a pdf file on an iPad. Is there any application to do that ?
-
Box in Template Cell(Smartforms)
Hi all, I am having a text inside a Template Cell. I need to have box,all around the text. The system (ECC 6.0)is not allowing borders in the template. Please suggest some way to do this. Thanks in advance Regards Ananya
-
Here we go again. You really have to be kidding, right?
As of today, the complete 4 week new release list for music is gone again for the 3rd time since store 7 launched. Let's review: It was not until after the first week of the launch that the complete new release list was fully operable (first time sys
-
Hi, In tcode MD04, there's a Purchase Order, which delivery date lies <b>after</b> the date of requirement elements, but no execptio message showed by the system, is there anything wrong with the settings? Please kindly advise. Thanks and best regard
-
What is the cause of these usual characters when I "man patch"? Am I missing a locale or something? Last edited by graysky (2011-10-19 17:29:53)