Radeon Drivers problems with BootCamp Windows 2008 Server R2

Hello !! I have some troubles with BootCamp and Windows 2008 Server R2... I can't find any graphic drivers for my AMD Radeon HD 6490 !! Heeeelp please
(I Have a Macbook Pro i7)

Shoooryuken, did you ever get this problem resolved? I have thhe same issue...
I have the 2011 MacBook Pro 15" 2.0ghz Quad Core i7 with integrated Intel HD Graphics 3000 and AMD Radeon 6490M.
I just installed Windows Server 2008 R2 (Which is based on Windows 7) using Boot Camp. After I installed it, the I only have 3 resolution options, all of which are stretched. I checked the device manager and found that the Apple Instal DVD did not work and only a "Standard VGA Graphics Adapter" was installed. It also reports a whopping 16MB of graphics memory
I downloaded the "detect and install" driver utility from AMD (http://support.amd.com/us/gpudownload/Pages/index.aspx) and it detected my correct OS and downloaded something (driver maybe?). When I clicked install, I recieved this message: "AMD Catalyst Mobility cannot be downloaded due to incompatible hardware/software on your computer. Your computer does not contain a proper graphics adapter."
I don't really know why Windows does not detect the graphics card. Right now I am trying to install the Intel graphics drivers for the Intel HD 3000 integrated graphics... I will report back if I get the integrated graphics running...

Similar Messages

Interesting problem with RAID, Windows 2008 server, and Ubuntu

sooooo, i got the system working and linux loved it. just adored it.
however, Windows did not. Windwos 2008 server hard locks from time to time. i fianlly figured out that it had to do with the RAID 0 i was running, that didn't really succeed.
However, when i rebuilt the RAID and everything on it, it refuses to recognize the disk, sayign that windwos cannot determine if this drive has a valid system volume on it.
Ubuntu 9.04 server, however, just took it and made it work great.
I enabled the PCI Bus SATA to be Master in the BIOS, and then Windows Server 2008 said that it could not determine if the drive was bootable. Then i went back and redid the raid, and it did the original error.
I inserted a windows xp disk, destroyed the RAID, and then installed the software on a NEW disk. While it installed fine, it gave me an IRQL_not_less_than_or_equal error. It boots in safe mode, but no where else. I tried installing the NVRAID and MCP55 drivers in safemode and what not, but still, it refused to cooperate. I went back to ubuntu, this time the desktop/workstation versions, and i am doing an alternate install with RAID...much to my disappointment becuase now i will have to use VirtualBox to isntall windows...and if that fails, i'll be really pissed.
My settings are as follows:
SATA Controller 0-5 enabled
NVRAID- enabled
PCI BUS SATA- Option ROM Enabled, Master Enabled, and 0040h latency
MAC LAN- same as above
MAC LAN1- has master disabled, but the other stuff is the same
Serial port A is on AUTO, B is disabled, and floppy is disabled.
Option Rom is PFA relocation.
Also, my AEC A6880 is giving me a ROM expansion error, even though, in both OSes it can be seen....usualy. I just want to fix it
lastly, my LSI PCI-E scsi adapter is not being seen at ALL.
thanks guys.

Quote
Also, my AEC A6880 is giving me a ROM expansion error, even though, in both OSes it can be seen....usualy. I just want to fix it
lastly, my LSI PCI-E scsi adapter is not being seen at ALL.
Turn off onboard raid ctrl 1st. There are conflicting.
Quote
I enabled the PCI Bus SATA to be Master in the BIOS, and then Windows Server 2008 said that it could not determine if the drive was bootable.
Known issue, partition mess:
http://www.google.bg/search?hl=bg&ei=W-l3Sq_4NMbdsgbHnKmmBQ&sa=X&oi=spell&resnum=0&ct=result&cd=1&q=windows+cannot+determine+if+this+drive+has+a+valid+system+volume+on+it.&spell=1
Quote
I inserted a windows xp disk, destroyed the RAID, and then installed the software on a NEW disk. While it installed fine, it gave me an IRQL_not_less_than_or_equal error. It boots in safe mode, but no where else. I tried installing the NVRAID and MCP55 drivers in safemode and what not, but still, it refused to cooperate.
What's the BSOD error? Are you using XP installation disk with included SP3?

Is anyone else having these problems with Bootcamp Windows 7 on MBP?

Ok, I bought a new MBP on Amazon a couple of days ago to be able to put Windows 7 on it with Bootcamp. I wanted the OS with the hardware the MBP had to offer, but have since run into a few problems. Let me know if you've run into similar problems and/or you have solutions.
1. After installing the drivers for Windows, my webcam doesnt work. It says that the drivers are not installed yet I downloaded the most recent driver package from Apple.
2. The MBP gets REALLY hot when running windows 7. This cant be good for the computer components, but is it a fire risk as well?
3. Videos on youtube do not expand fully to the screen, instead leaving black bars on the bottom and right sides.
4. The battery life has decreased from 7 hours to about 2.5 hours while on Windows.
5. When I click an icon on the taskbar, its title flashes over it. (not the biggest deal but its annoying)
These things shouldn't be happening at this price tag. Any help is greaty appreciated.

I personally have no knowledge of how windows runs on a mac. Other then the mac having a efi instead of a bios the hardware is the same. Apple has restricted windows in some ways. After all apple supplies os x. I do know a few people the run windows on their macs and they don't seem to have any really problems.
If you look around HP, Dell, Toshiba, Sony all use i7 cpus and have system that come with ati or nvidia graphics cards.

I am having a problem installing the x86 drivers on a Windows 2008 server for a hp 4000n.

I am having a problem installing the x86 drivers on a Windows 2008 server for a hp laserjet 4000n.

Hi all,
Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
Please help !
Regards,
Vipul

Problem with 10.2.0.5 patch on Windows 2008 Server R2 64bit

Hello
I have HP server with Windows 2008 Server R2 64bit. I installed
latest 64-bit version of Oracle Database 10.2.0.4 and everything works fine and later installed the patch 10.2.0.5 (64 bits) as the Oracle maintains that with the R2 version of the system it is necessary to correct work.
Now, after uploading the patch database starts and closes
after about 15 minutes and my alert log file is changed to the binary version which do not see anything (means that after patch installation (10.2.0.5) the alert log file isn't normal text file and it looks like that:
Źýţ cśy iµ•eű .Ź ťy ťy Ř®y hčN)
You can read only the beginning and it's very large - 13 Mb after unpacking from ZIP.
Can anyone met with this configuration and knows how to solve
problem?
This is the link to my strange alert log file:
http://www.2shared.com/file/22MFap1V/alert_orcl.html
I attached my spfile.ora file too:
http://www.2shared.com/file/gUmID0fh/SPFILEORCL.html

Your alertlog is corrupted, it could be something about a virus or even a problem with disk drives. Have you scanned your server with anti-virus software? Have you scanned the disks?
Last questison: Have you upgraded your database after you installed the patch?
SQL> SHUTDOWN IMMEDIATE
SQL> STARTUP UPGRADE
SQL> SPOOL patch.log
SQL> @ORACLE_BASE\ORACLE_HOME\rdbms\admin\catupgrd.sql
SQL> SPOOL OFFIf not, please read the "readme" file which comes with patchset (do not just run the above commands without reading Oracle documention).
Best Regards,
Gokhan
If this question is answered, please mark appropriate posts as correct/helpful and the thread as closed. Thanks

Problem with update SCCM client to Sp1 CU3 on Windows 2008 server

Hi all,
I have problem with update SCCM client on Windows 2008 Server to 2012 Sp1 CU3. I have sent to deployment package with update (SP1 Cumulative Update 3 - server update) on four servers and after few minutes I have got in Monitoring\Deployment details four
this same errors in "Asset Details":
USER Message ID
Status type Description
NT\AUTHORITY\SYSTEM 1006
Error 3003
I love that types of error... which is har to find answer on google :-( I have tried but I haven't find any constructive :-( Did you met with something similar? Which log I should check (sorry - I'm still noob in SCCM2012) to update actual SCCM Client SP1
(5.00.7804.1000) to SP1 CU3 (5.00.7804.1400)?
Thank you.

I see in fodler with CU3 updates, are four packages:
- SP1 Cumulative update 3 - x64 client update
- SP1 Cumulative update 3 - x86 client update
- SP1 Cumulative update 3 - server update
- SP1 Cumulative update 3 - console update
It will be stupid but... maybe I should deploy x64 client update package?

Problem with upgrade Windows 2003 to Windows 2008

Hi,
I have problem with upgrade Windows 2003 to Windows 2008 R2
When I run installer it check compatibility drivers and programs after that appear message that I need to uninstall "adaptec storage manager" but I already remove this driver from the system and registry.
Any ideas to solve this problem?
My server it's IBM System x3500
Regards

Not sure if this issue was solved or no longer relevant, but I had the same issue with the same IBM x3500 server type.
Based on the SETUPACT.LOG output from the Server 2003 to 2008 upgrade compatibility check, the problem was that the driver AACMGT.SYS is unsigned, and hence not acceptable for running in Windows Server 2008.
AACMGT.SYS is a part of IBM ServeRAID but unfortunately, even the latest versions 9.3 to not seem to update or replace this file. It's also possible this file is a residue of an earlier, deprecated version of ServeRAID, I don't know.
In the end, to get passed the Upgrade check hard stop, I did this, though I'm not sure if all steps are needed:
0. Make sure you have a system backup in case you break something doing this steps. If you do break your system and cannot recover from backups, it's not my fault!
1. Go into Device Manager --> Disks and check the Driver properties for the disks on your system. You might have AACMGT.SYS listed for some/all disks and also listed as unsigned.
2. Uninstall IBM ServeRAID from the system, just in case
3. Do into Device Manager and go under Disks, and manually Uninstall all the disks in the list including "AdaptecArray SCSI Disk" and some other secondary. I did not reboot right away.
4. Go to console, go into C:\WINDOWS\SYSTEM32\DRIVERS, and rename AACMGT.SYS to something else.
5. Reboot the system and hope it still boots. Go into Device Manager -> Disks and make sure that AACMGT.SYS is no longer listed.
6. Run the 2003 to 2008 Upgrade process again. The Compatibility checker should no longer flag "Adaptec Storage Manager" as a blocker.

Does Windows 2008 Server run ok under Mac Mini Bootcamp?

Does anyone have any experience of installing and running Windows 2008 Server on a Mac Mini (of which has either Mac OS or Mac OS Server installed), under Bootcamp?
I currently have an old Dell with Windows 2008 server which acts as my Domain Controller, Exchange Server for a small home-office network. It's due an upgrade as the hardware is so old (and noisy!) and like the idea of having a nice compact, quiet Mac Mini, but want to make sure it can carry out the same duties under bootcamp on Win2008?

Windows 2008 can be installed in Boot Camp. However I don't believe it is officially supported by Apple so there may or may not be issues with installing the Boot Camp Drivers (or future updates to the Boot Camp drivers.) Not something I'd be recommending for a "production" environment. If this is a test/dev system, then probably worth trying, depending on how critical your network uptime is.
Also, you didn't mention if your Dell came with Windows 2008 preinstalled, but if it did, then likely it has a "branded" version of Windows that won't activate correctly on non-Dell hardware. (If your Windows disks have "Dell" on them, they won't work with the Mac.) So you may need to purchase a retail or volume license copy of Windows 2008.
In general, for a server running as a DC & Exchange, you'd want RAID1 as a minimum so that would be the Mac Mini Server, not the "desktop" Mac Mini. Unless you have one lying around, you're looking at something around $1500-$2000 to start, depending on whether you can transfer your existing Windows 2008 & Exchange installations. (Another $500-$2000 depending on what vesions of Windows & Exchange.) And probably 8GB of RAM since Windows 2008 & Exchange on 4GB is pushing it. Considering the costs, I suggest you look at the Dell T110 series or the HP Proliant 110 series. Both lines are very quiet and are supported for Windows 2008 from the factory, including Windows Small Business Server, which includes Exchange. While not as small as a Mac Mini, they are mini towers and about the size of a typical PC desktop.
If you really wanted a small footprint, then HP has a "microserver" series. You'd probably need to call HP to get the build you want as the online ordering is limited for that model. From Dell, there is the Zino model desktop. Again, not supported for a "server", but you were going to consider a the non-server version of the Mac Mini, then the Zino has at least a chance of you reusing your existing versions of Windows if they're Dell branded, thus saving your something in the range of $500-$2000 for new software. (But I would NOT recommend a non-server chassis without RAID1 hard drives, so the Zino is not my choice. I just offer it as a possibility if you accept the risk of an unsupported installation, as would have been installing Windows 2008 in Boot Camp.)
So yes, it will work. But I wouldn't recommend it for a production environment, especailly if you have the "desktop" computer without RAID1.

Windows 2008 server with a Z77A-GD65 m/b?

Hi,
I picked up a Z77A-GD65 last evening assuming I could install Windows 2008 server on it. Upon trying, the install DVD doesn't even see the hard drives.
Any suggestions? Is this m/b not compatible with Win 2008 servers?
Thanks!
--Ben

Try loading the AHCI drivers just like you would raid drivers.
(Intel Rapid Storage Drivers)
http://www.msi.com/product/mb/Z77A-GD65.html#/?div=Driver&os=Win7%2064
If you are trying to use SATA_7 or SATA_8 you will need to load the AS Media controller drivers:

Windows 2008 Server, M93P Drivers

We recently purchaced a M93P for server, we installed windows 2008 server on it and there are 6 drivers missing. I've searched for then on the Lenovo website with little luck. Does anyone know where I can find drivers for the following
Ethernet Controller
PCI Serial Bus
PCI Simple Communications Controller
SM Bus Controller
US Controller
And there's an unknown device, listed as ACPI\LEN4001
Thanks for the help.
-Kallie

Is it possible that I could have a copy of WS 2008 64-bit from you?
Thanks,

Windows 8.1 Enterprise DirectAccess with a Windows 2008 R2 DA server

I don't suppose anyone out there is using Windows 8.1 Enterprise with a Windows 2008 R2 DirectAccess setup?
We have an existing 2008 R2 DA setup used by 50+ Windows 7 Enterprise laptops without any issues.
We're testing Windows 8.1 Enterprise and the DirectAccess functionality seems to be very intermittent, you can't use any of the Windows 8.1 powershell commands to look at the status as it's not using the new 2012 functionality but DA is there and works.
The problem is it seems to take a long time to connect, anything from 15 minutes to several hours and in some instances seems to fail to connect entirely. I can't see anything in the event logs and I'm really struggling to work out why it's so intermittent.
Cheers
Robert Grigsby

Hi,
DirectAccess performance is dependent on many factors such as the speed of the DirectAccess client’s connection to the Internet, Internet latency and congestion between the
DirectAccess client and server, and the current load on the DirectAccess server. Another reason might be the type of Internet Protocol version 6 (IPv6) encapsulation being used over the Internet Protocol version 4 (IPv4) Internet. 6to4 and Teredo tend to have
higher performance because the encapsulation is simpler to process. Internet Protocol over Secure Hypertext Transfer Protocol (IP-HTTPS) tends to have lower performance because of the higher protocol overhead and the additional Secure Hypertext Transfer Protocol
(HTTPS)-based encryption and decryption.
When examining performance issues, one of the first places to look is the display of the
ipconfig command on the DirectAccess server, which indicates the type of encapsulation based on the interface that has a global IPv6 address assigned.
The related KB:
DirectAccess Client Connection is Slow
http://technet.microsoft.com/en-us/library/ee844161(v=ws.10).aspx
Regards.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Looking for T61 Drivers to support Windows 2008 Server

Hello:
I recently bought a T61 that came with Vista Ultimate. I ventured into installing Windows 2008 Server on it.
I have been almost successful in my attempt. The machine does operate and I was able to use the Vista drivers to configure the components.
I compare the Device Listings under Vista and under Server 2008 and I see the following missing components:
Bluetooth Radios
    Microsoft Bluetooth Enumerator
Disk drives
    IMD-0
Human Interface Devices
    Bluetooth Remote Control
    HD-compliant consumer control device
IDE ATA/ATAPI controllers
    IDE Channel
Monitors
    ThinkPad Display 1440x900 (mine says Generic PnP Monitor)
Network Adapters
    Bluetooth Device (Pesoanl Area Network)
    Bluetooth Device (RFCOMM Protocol TDI)
SM Driver
    SM Bus Service
System Devices
    UMBus Enumerator
The good news is that the laptop works fine as a Server. If I could resolve these missing components, it will be nice.
I searched through Google but I don't seem to have any luck identifying the drivers. And, of course Lenovo Technical Support said that they do not support that OS on this laptop even though I have proved them wrong!)
Can somebody advise me?
venki

Hello venki,
I have run server 2008 on my T61 7665-b68.
I have installed all Drivers for Vista 64 from Lenovo with systemupdate.
For the bluetooth installation look hier: http://capitalhead.com/articles/enable--install-microsoft-bluetooth-stack-on-windows-server-2008-x64...
regards
Sven
IBM T61 - 7665-B68 - 4GB RAM - 250GB HD - 1,8 GHz T7100 - 14,1" Display -1440x900 Intel 4965 a/g/n WLAN - DVDRW Multidrive III - Bluetooth 2.0 - Fingerprint

JFServer.exe fault in Windows 2008 server with Central V 5.7

I have an installation of Central 5.7 running 6 instances on Windows 2008 server 64 bit and have noticed that the six instances don't always come up when the machine is rebooted. Here is the error that it logs in the Central Log.
"Open of table 'C:\Users\Userid|Appdata\Local\Temp\JFX8A00.tmp' failed.
This also sometimes happens when I make changes to jobs in one of the instances and there seems to be no pattern wo what instances it happens in.
This behavior does not appear to happen with Central 5.7 running on XP or 2003 server.
Any thoughts on why this might be happening?

This is a recently known issue specific to Central on Windows 2008
Contact Adobe Support to obtain the patch. You can find their contact details in your support agreement.

Error: SAP installation of ERP Sr3 with ORACLE 10g on Windows 2008 server

Dear all,
while installaing SAP ERP SR3 with ORACLE 10g on windows 2008 server...
we are getting error as not support.
please confirm wether this version of OS is uspported or not.
thanking you in all,
by
Animesh

actualy we tried to change Oraparam.ini file in the installation folder...
edited ... windows= 5.0, 5.1, 6.0
we had entered 6.0
Yes - that is necessary.
and started ... but after starting we are getting ERROR like unKNOWN and installation popup (OUI popup) exiting with .. error popup.
Yes - because Oracle delivers its own Java version - which is too old to run on Windows 2008.
if you suggest us to use 2003 64 bit for temporaray .... purpose.
and is there any specified procedure to UPgrade OS.
like... DB should be updated before OS upgradation.
You can run 10.2.0.4 on Windows 2003 x64 nicely and upgrade to Windows 2008. Since there is no "upgrade" (it is the highest version supported) there´s no need to do anything.
The question you have to ask is:
Why do you need Windows 2008? Is there any technical implication?
Markus

In Windows 2008 server 64 bit database problem

Hi
In windows 2008 server (64 bit) application is deployed and database is oracle 10g. I got the error ORA-06502: PL/SQL: numeric or value error: character string buffer too small for one storeprocedure. The same database is dump in window 2003 server the application is working.No error. Given solution for window 2008 server.
Regards
ncsubbu

Hello,
You may check for the exact Oracle Release (with four digit) and scroll down to Oracle Database 10g Release 2 on the link below:
http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
In Windows *2008* you need to be in *10.2.0.3* (for 32 bit OS) or *10.2.0.4* (for 64 bit OS).
In Windows *2008 R2* you need to be in *10.2.0.5*.
Hope this help.
Best regards,
Jean-Valenti

Radeon Drivers problems with BootCamp Windows 2008 Server R2

Similar Messages

Maybe you are looking for