Radeon HD 3200 and HDMI output [Solved]

Alright so I'm on an HP pavilion dv5 laptop with an integrated radeon hd 3200 and for some reason, I can't seem to output to my 32inch TV after a certain part of the boot process. It's strange though, because if I have my HDMI cable plugged in during boot, I can see the BIOS/GRUB boot menu and part of the daemons being loaded in the beginning, then it all goes blank on the TV. When the HDMI is plugged in, xrandr returns
Screen 0: minimum 320 x 200, current 1280 x 800, maximum 8192 x 8192
VGA-0 disconnected (normal left inverted right x axis y axis)
LVDS connected 1280x800+0+0 (normal left inverted right x axis y axis) 331mm x 207mm
1280x800 60.0*+
1280x720 59.9
1152x768 59.8
1024x768 59.9
800x600 59.9
848x480 59.7
720x480 59.7
640x480 59.4
HDMI-0 connected (normal left inverted right x axis y axis)
1280x720 60.0 +
1024x768 60.0
800x600 60.3
720x480 59.9
640x480 60.0
I've googled around and searched through the forums but haven't been able to figure this out. Oh and I'm using the open source ATI driver, not the catalyst one from the AUR. So I'm quite stumped and am getting tired of having to boot into windows to stream stuff so any and all help (as always) is greatly appreciated.
[Solved]
Last edited by saint_13 (2011-06-22 20:43:07)

jlindgren wrote:Oddly enough, HDMI audio was *just* brought up on another thread. Take a look.
https://bbs.archlinux.org/viewtopic.php?id=119151
Alright I'll definitely be giving that a look over, however I'm still unable to output to my 32inch TV in my room. I mean it's definitely something with the TV, just no idea what. I've tried xrandr on the smallest resolution (like 640x400 or what have you) and still no go. My best guess is that it has something to do with the resolution, when the computer boots considering I can see my BIOS on my 32 inch but for the life of me I am just baffled. Anyways sorry for the late response, been busy with work and the like. So just to sum up so far; HDMI video out works on our 55 inch LCD @ any resolution but doesn't work on my little 32 inch. As always all help is greatly appreciated, especially you jlindgren for sticking around this long lol.

Similar Messages

AMD 780G Radeon HD 3200 Catalyst HDMI

Hi,
I got this gigabyte mainboard with the new AMD 780G chipset. Configured the BIOS to enable D-SUB and HDMI, installed arch with the 2008.04 RC USB stick image (wicked!) and got the newest catalyst drivers from [testing]. However I just can't get it to show anything on my TV attached via HDMI. The connection is ok, I even see my TV Manufacturer and its maximum resolution in the catalyst control center, but no matter what settings I chose, my TV shows only its default blue screen.
What do I need to do to get HDMI working? thanks for your help, chris

jlindgren wrote:Oddly enough, HDMI audio was *just* brought up on another thread. Take a look.
https://bbs.archlinux.org/viewtopic.php?id=119151
Alright I'll definitely be giving that a look over, however I'm still unable to output to my 32inch TV in my room. I mean it's definitely something with the TV, just no idea what. I've tried xrandr on the smallest resolution (like 640x400 or what have you) and still no go. My best guess is that it has something to do with the resolution, when the computer boots considering I can see my BIOS on my 32 inch but for the life of me I am just baffled. Anyways sorry for the late response, been busy with work and the like. So just to sum up so far; HDMI video out works on our 55 inch LCD @ any resolution but doesn't work on my little 32 inch. As always all help is greatly appreciated, especially you jlindgren for sticking around this long lol.

Coax and HDMI output simultaneously?

Prior to X1, I was able to output from the tuner two ways at the same time: via HDMI and coax. When I connect coax now, no signal goes through, even when I unplug the HDMI. Am I missing some step, or is this dual simultaneous output not possible? Thanks.

I would expect the coax output would work because the composite and component outputs (if applicable) still work when HDMI is being used. Hopefully you are aware that any devices you would have connected to the coax (RF) output needs to be set to channel 3???
buchan2 wrote:
Prior to X1, I was able to output from the tuner two ways at the same time: via HDMI and coax. When I connect coax now, no signal goes through, even when I unplug the HDMI. Am I missing some step, or is this dual simultaneous output not possible? Thanks.

G41TM-E43 - DVI and HDMI output at the same time?

I am looking to output to 2x 1920x1200 displays...nothing 3D and nothing that needs to be decoded...just some power point presentatinos and some flash within a browser window.
I am pretty sure the resolution isn't going to be a problem, but using both the DVI and HDMI ports at the same time is something I am concerned about. I am looking for people with actual knowledge that this works...no guessing please.
Regards,
Dan

Quote
I am looking for people with actual knowledge that this works...no guessing please.
The likelihood is that you won't be able to use DVI & HDMI at the same time, but you could use one or the other in conjunction with the VGA (D-Sub) port.
But as this is a user-to-user forum, and you may have to wait for someone with actual experience of this to see this thread and respond, for a definitive answer, contact MSI Support direct:
http://support.msi.com
But please do post back with the answer, as this could be useful for others in the future with the same question.

Radeon R6850 and hdmi output woes

Hi there, new to the forum and hoping someone can help me out.
I have both a small hdmi and dvi capable 20 inch monitor and a Sony kdl w4000 hdtv. I can output via hdmi and dvi to the small monitor without issue but i cannot for the life of me figure out how to output the signal via hdmi to the Sony tv - either alone or simply as a clone of the desktop on the smaller monitor.
Both displays (when the small monitor goes via dvi and the Sony via hdmi) are picked up by catalyst control centre but they are both labelled '1' which is odd in itself.
I have messed around with changing resolutions to something the Sony should accept, I have messed around with the settings on the TV to ensure hdmi is selected but none of this has helped at all.
I am running the latest drivers for the card.
BTW, I have another Radeon based laptop in the house and that will output to the Sony tv via hdmi without messing around with any settings - you simply plug the cable into both and its immediately detected.
Can anyone kindly advise?
Thanks in advance.
Dan

jlindgren wrote:Oddly enough, HDMI audio was *just* brought up on another thread. Take a look.
https://bbs.archlinux.org/viewtopic.php?id=119151
Alright I'll definitely be giving that a look over, however I'm still unable to output to my 32inch TV in my room. I mean it's definitely something with the TV, just no idea what. I've tried xrandr on the smallest resolution (like 640x400 or what have you) and still no go. My best guess is that it has something to do with the resolution, when the computer boots considering I can see my BIOS on my 32 inch but for the life of me I am just baffled. Anyways sorry for the late response, been busy with work and the like. So just to sum up so far; HDMI video out works on our 55 inch LCD @ any resolution but doesn't work on my little 32 inch. As always all help is greatly appreciated, especially you jlindgren for sticking around this long lol.

Intel 4500hd and hdmi output / vga port

hi guys, any hint on how to use my hdmi port or vga port to output on my lcd with a intel 4500hd integrated graphic card? thanks

samuele.mattiuzzo wrote:hi guys, any hint on how to use my hdmi port or vga port to output on my lcd with a intel 4500hd integrated graphic card? thanks
To be honest... it just works here for me. I use KMS and don't have a xorg.conf.

W540 + Dock station (40A20170EU), Audio and HDMI problems - SOLVED

Hello,
I have recently bought your dock station (40A20170EU) and as soon as I started using it the problems began:
- Audio jack on the dock is not working and is emitting static.
- As soon as I connect a display via HDMI port (on the dock station) my laptop display starts flickering (the display was tested on the PC and works).
I have updated the dock firmware to 2.21.000, nothing changed.
PS. The second monitor running from the docking stations display port is working fine.
I need your help!
Thank you!

SOLVED.
1) Removed all display drivers.
2) In BIOS I changed the display setting from standard to advanced.
3) Reinstalled all the display drivers.
4) Reconnect the HDMI monitor and now it’s working.
5) WINNING J
Thanks anyway.

Qosmio X500 and HDMI output does not work automatically

Sorry for my english..
Good morning.
I have a Qosmio x500 recently that runs on Windows 8.1
Previously, when I plugged in a hdmi cable from the PC to the TV, I had ( Samsung TV ), after a beep on the PC , automatically binding and made ??the TV is lit ( if it was in standby).
I could even control the PC with the TV remote control, put a movie , pause, etc.. Super convenient!
Source indicated on the TV Anynet + Toshiba pc.
And when I commutais with the TV remote control on TV, the PC screen is lit .
Off, despite repeated attempts with at least 5 software (drivers ?) Different Toshiba certified HDMI, I do not have it and I have to manually switch to see the PC on the TV (choose HDMI source on the TV) .
HDMICtrlMan is a folder where after installation, there are:
ChangeOutput.exe
HCMSoundChanger.exe
HDMICtrlCfg.exe
HDMICtrlMan.exe
But nothing works !
I also updated the video and audio driver: gforce gts 360m
But now I hold!
And I do not know the logical progression of the computer when you plug an HDMI cable (totally depends on the graphics chip ?).
If someone has an idea or experience of this problem, thank you in advance

>The problem is that with the drivers windows 7 64 bit, HDMI worked.
The problem is that you changed to a Windows system which is NOT supported on this notebook.
Of course you can use Windows 8.1 on this Qosmio X500 model but this does not mean that all notebook features would work properly.
Windows 8.1 is completely different and many Windows 7 tools and utilities are not compatible with Win 8.1
I dont know if this will help you but the Windows 8.1 Toshiba System Driver is very important software when in comes to use Windows 8.1 on Toshiba notebooks.
Try to install this Windows 8.1 Toshiba System Driver released for Qosmio X870/875 series.
But if this will not work, I dont see any other possible solutions.
Either you will give up the Windows 8.1 and will switch back to supported Win 7 or you would use Win 8.1 but without the automatic HDMI support.

MOVED: Re: G41TM-E43 - DVI and HDMI output at the same time?

This topic has been moved to Intel Core-iX boards.
https://forum-en.msi.com/index.php?topic=144229.0

Quote
I am looking for people with actual knowledge that this works...no guessing please.
The likelihood is that you won't be able to use DVI & HDMI at the same time, but you could use one or the other in conjunction with the VGA (D-Sub) port.
But as this is a user-to-user forum, and you may have to wait for someone with actual experience of this to see this thread and respond, for a definitive answer, contact MSI Support direct:
http://support.msi.com
But please do post back with the answer, as this could be useful for others in the future with the same question.

Re: H57M-GD65 - DVI and HDMI output at the same time?

Hi..,
apollos here. I also am preparing my m.b. retired my 2.5 yr old abit fatal1ty f190HD matx m.b to try this (MSI H57M-ED65 w\i5 661) My plan is port out all three 'display port, 'hdmi' and sub 15.
(L.V room hdmi projector, kitchen display port monitor, bedroom vga.) hdmi no change to L.V., vga to bedroom same.
? distances only concern is 'display port' signal....it's about 20ft. Any confirmations?
thnx,
apollos

Thnx moderator henry (for the sep)
1. I didn't really 'get' the 'iX' syntx for the topic .....so any 'i' series socket....yeah makes sense .....maybe put a couple '' for denotation. and a space bar.
2. re: hjking....wasn't intentional ....just typed....'h57m' in the 'search' box. the ' G41TM-E43' only one that came up; so I ran with it.
this is more appropriate though.
m-xmas; h-nyr!!!

HP 6735s with Radeon HD 3200 and Windows 7 RC - screen brightness problem (+)

Hello.
I installed a win 7 rc 64x on my HP 6735s and surprised when find brightness control did not work correctly. When i try move brightness slide bar in power plans or in win+x app it slide back to minimum right now. However, sometimes it changes to 70% and brightness change too, but only in this session - logoff, reboot or hibernate - and brightness again goes to minimum.
fn+f keys dont work at all, only in bios stage.
I tried all drivers i can find - ati whql for win7, ati beta, hp keys for vista 64 - its all dont work. What can i do else? HP engineers know about this problem? In ms forums only one solution - hp will release correct drivers before win 7 starts.

Just go to www.hp.com -> Support & Drivers -> Step1: Download drivers and software (and firmware) -> Step 2: 6735s (your laptop model), GO -> Select HP Compaq 6735s Notebook PC -> Microsoft Windows Vista Business (64-bit) -> HP Quick Launch Buttons.
In fact, it's the same version for all Vista Edition, just choose 32-bit or 64-bit.
Regards.

Component and hdmi issues

So I wanted to see if I could send the ATV signal from both component and hdmi outputs. Currently, I am using HDMI only to my Pioneer Pro 1120 at the 720 setting, but I wanted to send the signal to another tv (with component only) as well.
I could not output both signals, but when I went to output only the component signal, I could not get a signal (even on the Pioneer which auto adjusts the video resolution based on the input). Do I need to reboot when changing the AV output? I have tried the component on two different tv's. Do I have a bad component output on my ATV or am I missing a setting step somewhere?
Thanks,
Chris

Yes. I just had mine replaced today and it works nice!

Tty on HDMI output?

Hi, i've an asrock nettop ion 330 which provides vga and hdmi output, it is connected to a TV via hdmi.
If it is powered on before the tv, i can't see bios post messages nor kernel messages, nor any tty (works if i switch the tv on before the nettop)
When Xorg takes control, it correctly initializes hdmi output, but even switching to a tty leads to a black screen.
I suspect that it defaults to vga at boot if it can't see any hdmi device connected.
Is it possible force linux to output to the hdmi output even if it wasn't seen by the bios?
Something make me think that it should be possible, because if i turn on the tv, then turn on the box and then hibernate it, when it resumes it still outputs to hdmi (ttys+xorg) even if the tv was switched off at resume time.
Thanks
Last edited by kokoko3k (2010-12-19 18:35:11)

Which driver?
With KMS drivers you can force outputs on/off or force resolutions with 'video=' in the kernel line.
For example
video=HDMI-1:e video=LVDS-1:d
or
video=HDMI-1:1920x1080@60
With the nvidia driver you're probably out of luck.
Last edited by thestinger (2010-12-19 19:03:13)

[solved] Radeon HD 3200 & AIGLX

Hey all, I just purchased an HP Pavilion dm3, which by the way was a hell of a deal: http://www.officemax.com/technology/com … rod2850237
The machine is very thin and light, and has been the most linux-compliant laptop I've played with.
At any rate, I've got arch up and running beautifully (after fixing HP's effed up partitioning *shakes fist*) Everything is working: Wireless, audio, webcam, suspend, hibernate, etc.
My last problem is that I'm only getting sudo GPU acceleration, and no AIGLX.
I'm running completely without an xorg.conf file (woohoo!) Here's what I'm seeing:
Xorg.0.log wrote:
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.3.902 (1.7.4 RC 2)
Release Date: 2009-12-26
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-ARCH i686
Current Operating System: Linux shane-arch 2.6.32-ARCH #1 SMP PREEMPT Mon Jan 25 20:06:48 UTC 2010 i686
Kernel command line: root=/dev/disk/by-uuid/0ec557fe-c784-4c83-b129-12b05cd9a4c1 ro 5 vga=0x369 edd=off resume=/dev/sda5
Build Date: 26 December 2009 11:37:45AM
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 5 10:58:25 2010
(II) Loader magic: 0x81e4c60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 7
(--) PCI:*(0:1:5:0) 1002:9612:103c:3656 ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] rev 0, Mem @ 0xe0000000/268435456, 0xf2200000/65536, 0xf2100000/1048576, I/O @ 0x00006000/256
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default ati Device 0"
Driver "ati"
EndSection
Section "Screen"
Identifier "Builtin Default ati Screen 0"
Device "Builtin Default ati Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default ati Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default ati Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default ati Device 0"
(==) No monitor specified for screen "Builtin Default ati Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AutoAddDevices.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 6.12.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 6.12.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.0.901, module version = 2.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750,
ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650,
ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
ATI FirePro M5750, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI RS880
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 01@00:05:0
(WW) Falling back to old probe method for vesa
(II) RADEON(0): TOTO SAYS 00000000f2200000
(II) RADEON(0): MMIO registers at 0x00000000f2200000: size 64KB
(II) RADEON(0): PCI bus 1 card 5 func 0
(II) RADEON(0): Creating default Display subsection in Screen section
"Builtin Default ati Screen 0" for depth/fbbpp 24/32
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon HD 3200 Graphics" (ChipID = 0x9612)
(--) RADEON(0): Linear framebuffer at 0x00000000e0000000
(II) RADEON(0): PCI card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom:
SubsystemVendorID: 0x103c SubsystemID: 0x3656
IOBaseAddress: 0x6000
Filename: BR34990.bin
BIOS Bootup Message:
HP_Arwen RS780M DDR2 200e/500m
(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0x17ffb000
(II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0x17ffb000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 500000
(II) RADEON(0): Default Memory Clock: 333000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 14320
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.31.0
(==) RADEON(0): Page Flipping disabled on r5xx and newer chips.
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Detected total video RAM=393216K, accessible=262144K (PCI BAR=262144K)
(--) RADEON(0): Mapped VideoRAM: 262144 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling disabled
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 1432, min_out_pll: 64800, max_out_pll: 120000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 500.000000, mclk: 333.000000
(II) RADEON(0): PLL parameters: rf=1432 rd=12 min=64800 max=120000; xclk=40000
(WW) RADEON(0): LVDS Info:
XRes: 1366, YRes: 768, DotClock: 69300
HBlank: 96, HOverPlus: 32, HSyncWidth: 48
VBlank: 22, VOverPlus: 3, VSyncWidth: 6
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): I2C bus "LVDS" initialized.
(II) RADEON(0): Output VGA-0 has no monitor section
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output HDMI-0 has no monitor section
(II) RADEON(0): I2C bus "HDMI-0" initialized.
(II) RADEON(0): Port0:
XRANDR name: LVDS
Connector: LVDS
LCD1: INTERNAL_KLDSCP_LVTMA
DDC reg: 0x7e50
(II) RADEON(0): Port1:
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_KLDSCP_DAC1
DDC reg: 0x7e40
(II) RADEON(0): Port2:
XRANDR name: HDMI-0
Connector: HDMI-A
DFP1: INTERNAL_UNIPHY
DDC reg: 0x7e60
(II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0.
(II) RADEON(0): EDID vendor "LGD", prod id 556
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1446 1462 768 771 777 790 -hsync -vsync (47.4 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: LGD Model: 22c Serial#: 0
(II) RADEON(0): Year: 2009 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 29 vert.: 17
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.589 redY: 0.349 greenX: 0.337 greenY: 0.548
(II) RADEON(0): blueX: 0.155 blueY: 0.122 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 69.3 MHz Image Size: 294 x 166 mm
(II) RADEON(0): h_active: 1366 h_sync: 1398 h_sync_end 1446 h_blank_end 1462 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
(II) RADEON(0): LG Displayf
(II) RADEON(0): LP133WH1-TLA2
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0030e42c0200000000
(II) RADEON(0): 00130103801d11780ad5d59659568c27
(II) RADEON(0): 1f505400000001010101010101010101
(II) RADEON(0): 010101010101121b5660500016302030
(II) RADEON(0): 360026a6100000190000000000000000
(II) RADEON(0): 00000000000000000000000000fe004c
(II) RADEON(0): 4720446973706c61790a2020000000fe
(II) RADEON(0): 004c503133335748312d544c41320002
finished output detect: 0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 1
(II) RADEON(0): I2C device "HDMI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
finished output detect: 2
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): EDID vendor "LGD", prod id 556
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1446 1462 768 771 777 790 -hsync -vsync (47.4 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: LGD Model: 22c Serial#: 0
(II) RADEON(0): Year: 2009 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 29 vert.: 17
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.589 redY: 0.349 greenX: 0.337 greenY: 0.548
(II) RADEON(0): blueX: 0.155 blueY: 0.122 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 69.3 MHz Image Size: 294 x 166 mm
(II) RADEON(0): h_active: 1366 h_sync: 1398 h_sync_end 1446 h_blank_end 1462 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
(II) RADEON(0): LG Display
(II) RADEON(0): LP133WH1-TLA2
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0030e42c0200000000
(II) RADEON(0): 00130103801d11780ad5d59659568c27
(II) RADEON(0): 1f505400000001010101010101010101
(II) RADEON(0): 010101010101121b5660500016302030
(II) RADEON(0): 360026a6100000190000000000000000
(II) RADEON(0): 00000000000000000000000000fe004c
(II) RADEON(0): 4720446973706c61790a2020000000fe
(II) RADEON(0): 004c503133335748312d544c41320002
(II) RADEON(0): EDID vendor "LGD", prod id 556
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output HDMI-0 disconnected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output LVDS using initial mode 1366x768
(II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
after xf86InitialConfiguration
(**) RADEON(0): Display dimensions: (290, 170) mm
(**) RADEON(0): DPI set to (119, 204)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Will attempt to use R6xx/R7xx EXA support if DRI is enabled.
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules/libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 2.5.0
ABI class: X.Org Video Driver, version 6.0
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(--) Depth 24 pixmap format is 32 bpp
(II) RADEON(0): RADEONScreenInit e0000000 0 0
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x18000000
(II) RADEON(0): MC_FB_LOCATION : 0x00d700c0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Allocating from a screen of 262080 kb
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00801000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00805000
(II) RADEON(0): Will use 8196 kb for front buffer at offset 0x00000000
(II) RADEON(0): Will use 64 kb for PCI GART at offset 0x0fff0000
(II) RADEON(0): Will use 8196 kb for back buffer at offset 0x00809000
(II) RADEON(0): Will use 8256 kb for depth buffer at offset 0x0100a000
(II) RADEON(0): Will use 117760 kb for textures at offset 0x0181a000
(II) RADEON(0): Will use 119640 kb for X Server offscreen at offset 0x08b1a000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xe0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [pci] 32768 kB allocated with handle 0xf95fa000
(II) RADEON(0): [pci] ring handle = 0xf95fa000
(II) RADEON(0): [pci] Ring mapped at 0xa6ea3000
(II) RADEON(0): [pci] Ring contents 0x00000000
(II) RADEON(0): [pci] ring read ptr handle = 0xf96fb000
(II) RADEON(0): [pci] Ring read ptr mapped at 0xb76f3000
(II) RADEON(0): [pci] Ring read ptr contents 0x00000000
(II) RADEON(0): [pci] vertex/indirect buffers handle = 0xf96fc000
(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0xa6ca3000
(II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEON(0): [pci] GART texture map handle = 0xf98fc000
(II) RADEON(0): [pci] GART Texture map mapped at 0xa5023000
(II) RADEON(0): [drm] register handle = 0x2e440000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00d700c0 0x00d700c0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 18
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0x00d700c0 is: 0x00d700c0
(WW) RADEON(0): MC_AGP_LOCATION was: 0x003f0000 is: 0x00030000
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00d700c0 0x00d700c0
(II) RADEON(0): MC_AGP_LOCATION : 0x00030000
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Setting EXA maxPitchBytes
(II) EXA(0): Offscreen pixmap area of 122511360 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(II) UploadToScreen
(II) DownloadFromScreen
(II) RADEON(0): Acceleration enabled
(==) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Set up textured video
Output DIG0 transmitter setup success
Output CRT1 disable success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Mode 1366x768 - 1462 790 10
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00d700c0 0x00d700c0
(II) RADEON(0): MC_AGP_LOCATION : 0x00030000
freq: 69300000
best_freq: 69298571
best_feedback_div: 813
best_ref_div: 14
best_post_div: 12
(II) RADEON(0): crtc(0) Clock: mode 69300, PLL 69290
(II) RADEON(0): crtc(0) PLL : refdiv 14, fbdiv 0x32D(813), pdiv 12
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
Output DIG0 transmitter setup success
Output DIG2 encoder setup success
Output DIG2 encoder setup success
Output DIG0 transmitter setup success
Output DIG0 transmitter setup success
Output DIG0 transmitter setup success
Enable CRTC memreq 0 success
Enable CRTC 0 success
Unblank CRTC 0 success
Output CRT1 disable success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(EE) AIGLX error: dlopen of /usr/lib/xorg/modules/dri/r600_dri.so failed (/usr/lib/xorg/modules/dri/r600_dri.so: file too short)
(EE) AIGLX: reverting to software rendering
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 361 x 203
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device ImPS/2 Generic Wheel Mouse
(**) ImPS/2 Generic Wheel Mouse: always reports core events
(**) ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event12"
(II) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
(II) ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
(II) ImPS/2 Generic Wheel Mouse: Found relative axes
(II) ImPS/2 Generic Wheel Mouse: Found x and y relative axes
(II) ImPS/2 Generic Wheel Mouse: Configuring as mouse
(**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
(**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE)
(**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
(**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
(II) ImPS/2 Generic Wheel Mouse: initialized for relative axes.
(II) config/hal: Adding input device hp webcam
(**) hp webcam: always reports core events
(**) hp webcam: Device: "/dev/input/event11"
(II) hp webcam: Found keys
(II) hp webcam: Configuring as keyboard
(II) XINPUT: Adding extended input device "hp webcam" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event3"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event7"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event5"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) RADEON(0): EDID vendor "LGD", prod id 556
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1446 1462 768 771 777 790 -hsync -vsync (47.4 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: LGD Model: 22c Serial#: 0
(II) RADEON(0): Year: 2009 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 29 vert.: 17
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.589 redY: 0.349 greenX: 0.337 greenY: 0.548
(II) RADEON(0): blueX: 0.155 blueY: 0.122 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 69.3 MHz Image Size: 294 x 166 mm
(II) RADEON(0): h_active: 1366 h_sync: 1398 h_sync_end 1446 h_blank_end 1462 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
(II) RADEON(0): LG Display
(II) RADEON(0): LP133WH1-TLA2
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0030e42c0200000000
(II) RADEON(0): 00130103801d11780ad5d59659568c27
(II) RADEON(0): 1f505400000001010101010101010101
(II) RADEON(0): 010101010101121b5660500016302030
(II) RADEON(0): 360026a6100000190000000000000000
(II) RADEON(0): 00000000000000000000000000fe004c
(II) RADEON(0): 4720446973706c61790a2020000000fe
(II) RADEON(0): 004c503133335748312d544c41320002
(II) RADEON(0): EDID vendor "LGD", prod id 556
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "LGD", prod id 556
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1446 1462 768 771 777 790 -hsync -vsync (47.4 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: LGD Model: 22c Serial#: 0
(II) RADEON(0): Year: 2009 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 29 vert.: 17
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.589 redY: 0.349 greenX: 0.337 greenY: 0.548
(II) RADEON(0): blueX: 0.155 blueY: 0.122 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 69.3 MHz Image Size: 294 x 166 mm
(II) RADEON(0): h_active: 1366 h_sync: 1398 h_sync_end 1446 h_blank_end 1462 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
(II) RADEON(0): LG Display
(II) RADEON(0): LP133WH1-TLA2
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0030e42c0200000000
(II) RADEON(0): 00130103801d11780ad5d59659568c27
(II) RADEON(0): 1f505400000001010101010101010101
(II) RADEON(0): 010101010101121b5660500016302030
(II) RADEON(0): 360026a6100000190000000000000000
(II) RADEON(0): 00000000000000000000000000fe004c
(II) RADEON(0): 4720446973706c61790a2020000000fe
(II) RADEON(0): 004c503133335748312d544c41320002
(II) RADEON(0): EDID vendor "LGD", prod id 556
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "LGD", prod id 556
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1446 1462 768 771 777 790 -hsync -vsync (47.4 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: LGD Model: 22c Serial#: 0
(II) RADEON(0): Year: 2009 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 29 vert.: 17
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.589 redY: 0.349 greenX: 0.337 greenY: 0.548
(II) RADEON(0): blueX: 0.155 blueY: 0.122 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 69.3 MHz Image Size: 294 x 166 mm
(II) RADEON(0): h_active: 1366 h_sync: 1398 h_sync_end 1446 h_blank_end 1462 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
(II) RADEON(0): LG Display
(II) RADEON(0): LP133WH1-TLA2
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0030e42c0200000000
(II) RADEON(0): 00130103801d11780ad5d59659568c27
(II) RADEON(0): 1f505400000001010101010101010101
(II) RADEON(0): 010101010101121b5660500016302030
(II) RADEON(0): 360026a6100000190000000000000000
(II) RADEON(0): 00000000000000000000000000fe004c
(II) RADEON(0): 4720446973706c61790a2020000000fe
(II) RADEON(0): 004c503133335748312d544c41320002
(II) RADEON(0): EDID vendor "LGD", prod id 556
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "LGD", prod id 556
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1446 1462 768 771 777 790 -hsync -vsync (47.4 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: LGD Model: 22c Serial#: 0
(II) RADEON(0): Year: 2009 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 29 vert.: 17
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.589 redY: 0.349 greenX: 0.337 greenY: 0.548
(II) RADEON(0): blueX: 0.155 blueY: 0.122 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 69.3 MHz Image Size: 294 x 166 mm
(II) RADEON(0): h_active: 1366 h_sync: 1398 h_sync_end 1446 h_blank_end 1462 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
(II) RADEON(0): LG Display
(II) RADEON(0): LP133WH1-TLA2
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0030e42c0200000000
(II) RADEON(0): 00130103801d11780ad5d59659568c27
(II) RADEON(0): 1f505400000001010101010101010101
(II) RADEON(0): 010101010101121b5660500016302030
(II) RADEON(0): 360026a6100000190000000000000000
(II) RADEON(0): 00000000000000000000000000fe004c
(II) RADEON(0): 4720446973706c61790a2020000000fe
(II) RADEON(0): 004c503133335748312d544c41320002
(II) RADEON(0): EDID vendor "LGD", prod id 556
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "LGD", prod id 556
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1446 1462 768 771 777 790 -hsync -vsync (47.4 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: LGD Model: 22c Serial#: 0
(II) RADEON(0): Year: 2009 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 29 vert.: 17
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.589 redY: 0.349 greenX: 0.337 greenY: 0.548
(II) RADEON(0): blueX: 0.155 blueY: 0.122 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 69.3 MHz Image Size: 294 x 166 mm
(II) RADEON(0): h_active: 1366 h_sync: 1398 h_sync_end 1446 h_blank_end 1462 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
(II) RADEON(0): LG Display
(II) RADEON(0): LP133WH1-TLA2
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0030e42c0200000000
(II) RADEON(0): 00130103801d11780ad5d59659568c27
(II) RADEON(0): 1f505400000001010101010101010101
(II) RADEON(0): 010101010101121b5660500016302030
(II) RADEON(0): 360026a6100000190000000000000000
(II) RADEON(0): 00000000000000000000000000fe004c
(II) RADEON(0): 4720446973706c61790a2020000000fe
(II) RADEON(0): 004c503133335748312d544c41320002
(II) RADEON(0): EDID vendor "LGD", prod id 556
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): EDID vendor "LGD", prod id 556
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1366x768"x0.0 69.30 1366 1398 1446 1462 768 771 777 790 -hsync -vsync (47.4 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: LGD Model: 22c Serial#: 0
(II) RADEON(0): Year: 2009 Week: 0
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 29 vert.: 17
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.589 redY: 0.349 greenX: 0.337 greenY: 0.548
(II) RADEON(0): blueX: 0.155 blueY: 0.122 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 69.3 MHz Image Size: 294 x 166 mm
(II) RADEON(0): h_active: 1366 h_sync: 1398 h_sync_end 1446 h_blank_end 1462 h_border: 0
(II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 790 v_border: 0
(II) RADEON(0): LG Display
(II) RADEON(0): LP133WH1-TLA2
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0030e42c0200000000
(II) RADEON(0): 00130103801d11780ad5d59659568c27
(II) RADEON(0): 1f505400000001010101010101010101
(II) RADEON(0): 010101010101121b5660500016302030
(II) RADEON(0): 360026a6100000190000000000000000
(II) RADEON(0): 00000000000000000000000000fe004c
(II) RADEON(0): 4720446973706c61790a2020000000fe
(II) RADEON(0): 004c503133335748312d544c41320002
(II) RADEON(0): EDID vendor "LGD", prod id 556
Dac detection success
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
I've bolded the sections in question. Here's a little more info:
[shane@shane-arch ~]$ glxinfo | grep direct
direct rendering: Yes
[shane@shane-arch ~]$ lsmod | grep kms
drm_kms_helper 21971 1 radeon
drm 126588 4 radeon,ttm,drm_kms_helper
Any help would be appreciated I'd like to get compiz up and running.
-Shane
Last edited by krazyshane (2010-02-05 17:23:00)

You nailed it with the ati-dri package! Had a corrupt checksum! Forced a reinstall and now all good
Thanks for the quick reply!
-Shane

[SOLVED] How to use the HDMI output of my laptop (Openbox)

Hi everyone
I use ArchLinux along with Openbox, PcManFM, LXterminal (no desktop environment) on my Asus X52F (CPU/GPU = Intel core i3-350M).
I'd like to be able to use my HDMI output to watch movies on my TV.
When I used it with Ubuntu/Linux Mint, the HDMI output worked out of the box when I pressed Fn+F8 on my keyboard, but now it doesn't anymore.
I guess some packages or configuration are missing, because my others multimedia keys (Fn+Fx) to control the brightness of the screen, sound volume... are working, but since I didn't find anything on the wiki, I'm asking you.
Thank you ;]
EDIT: Arg, wrong section, sorry
Last edited by Lowra (2012-02-13 22:26:28)

What I did to solve it:
- Installed "lxrandr" from the official repo
- Configured Openbox to launch lxrandr when I pushed Fn+F8.
Now, If I want to watch something on my TV through HDMI:
1) Push Fn+F8
2) Tick the HDMI button under lxrandr, and click Apply
3] Enjoy :]

Radeon HD 3200 and HDMI output [Solved]

Similar Messages

Maybe you are looking for