Radeon HD 6490M performance problem in Lion

I installed Lion in my 2011-early MacBook Pro (Core i7, 4GB, Radeon HD 6490M 256MB). When the integrated Intel HD Graphics 3000 is working, everything is fine. But when I switch to Radeon HD 6490M, graphic performance seems so bad that even swiping between spaces becomes very unsmooth, just like very low FPS in 3D games.

I have a Lion running on a new MacBook Pro 15", early 2011 model, 8GB RAM, AMD Radeon HD 6490M 256 MB, and I'm a little dissapointed in the graphics performance. Like you, I'm seeing what appears to be low FPS, which is exhibited mostly noticeably in window resizing: there's a lot of stuttering and lag. Yesterday I played around with the high-end MacBook Pro with the AMD Radeon HD 6750M graphics cards. I noticed that the display unit was set to always use the advanced card--in fact, in systems prefs, I could not change it to default auto switching. Windows resizing was noticeabley smoother and responsive on this unit. On my MacBook, I see no difference between using the onboard HD 3000 graphics support and the advanced 6490M card--at least in terms of window resizing. Not sure what this adds to the conversation, but here you go!

Similar Messages

Radeon HD 6490m Switchable Graphics Problems

Hello.
My notebook has been really sluggish lately, especially when browsing the internet, gaming or photo editing. It started a few weeks ago... never had any problems before. I didn't install any new programs, updates or drivers, so I don't know what caused it.
I did a clean install of Windows 7-64bit last night and got all the drivers from HP support. It was still being sluggish, so I disabled hardware acceleration on Chrome and ie11 and that solved the problem on those two programs.. but the rest is still being slow (even the mouse pointer is lagging). So I'm thinking the problem has to do with the graphics card (?).It's a Radeon HD 6490m (switchable w/ Intel HD Graphics).
I have my power option set to High Performance and the switchable graphics set to High Performance GPU. Are there any other settings I could tweak? Or a compatible driver I could try?
Thanks

Hi @johnw80 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv7-6179us Entertainment Notebook and issues with performance lags. Thank you for all the information about what is happening and what you have done thus far. Something is slowing the Notebook down. Did you install some virus protection or a firewall? If you disable the virus software, are your speeds better.
Here is a document on improving your system.
Try seeing what is active in the task manager, ctrl +alt+ del see what is running.
If that does not help at the end of this document it shows you to do a hardware test. The final thing you should try is to reload the factory BIOS settings.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system at the time of purchase. It will make sure all your updates have been completed.
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Does anyone know about Master Collection CS6 performance problems on OSX Mountain Lion?

I have a 15" MBP (late 2011) and I'm having some poor performance problems even after a clear install, reindexing the system and fixing all permission errors in Disk Utility. I have some suspicions about compatibility problems with Adobe Master Collection CS6 cause those are the programms I always work with and in wich I have experienced a bad performance.
Hardware test says everything is fine. Any sugestion?

Guys, I suffered the same problem for 4 days. I am on the new MBP Pro Retina Display + Mountain Lion 16GB Ram, etc...
I first thought it was to do with retina display however no, that is not the case.
SOLUTION (sounds odd but works):
The only way I found to fix it, is setting photoshop to use the East Asian text engine instead of the Middle East one. (Prefs -> Type -> East Asian). Then restart Photoshop.

AMD Radeon HD 6490M Windows 8 - 64-bit Driver

Hi guys,
I have HP Pavilion DV6-6B51EA and curently I'm using licenced Windows 7 Home Premium 64-bit.
I tried upgrading to Windows 8 Release Preview but I can't install driver for my graphics card which is AMD Radeon HD 6490M.
The problem is I can't download and install drivers from AMD website, HP laptops can only use the drivers from their website, well, at least for the graphics cards.
So, I can't use Win 7 driver on Win 8. I would like to know is there any chance I can find a driver that will work, or can you tell me when will HP release new drivers for my latopt for Windows 8?
Cheers

Hi. I tried to do that with the same download package on my Pavilion DV6 CTO Quad edition and it fails to install the driver because of a conflict with the C++ Redistributable 2010 package build into the installer. Does anyone know if HP is going to update the switchable graphic drivers for Windows 8? They better!

1.1 performance problems related to system configuration?

It seems like a lot of people are having serious performance problems with Aperture 1.1 in areas were they didn't have any (or at least not so much) problems in the previous 1.01 release.
Most often these problems occur as slow behaviour of the application when switching views (especially into and out of full view), loading images into the viewer or doing image adjustments. In most cases Aperture works normal for some time and then starts to slow down gradually up to point were images are no longer refreshed correctly or the whole application crashes. Most of the time simply restarting Aperture doesn't help, one has to restart the OS.
Most of the time the problems occur in conjunction with CPU usage rates which are much higher than in 1.0.1.
For some people even other applications seem to be affected to a point where the whole system has to be restarted to get everything working up at full speed again. Also shutdown times seem to increase dramatically after such an Aperture slowdown.
My intention in this thread is to collect information from users who are experiencing such problems about their system configuration. At the moment it does not look like these problems are related to special configurations only, but maybe we can find a common point when we collect as much information as possible about system where Aperture 1.1 shows this behaviour.
Before I continue with my configuration, I would like to point out that this thread is not about general speed issues with Aperture. If you're not able to work smoothly with 16MPix RAW files on G5 systems with Radeon 9650 video cards or Aperture is generally slow on your iBook 14" system where you installed it with a hack, than this is not the right thread. I fully understand if you want to complain about these general speed issues, but please refrain from doing so in this thread.
Here I only want to collect information from people who either know that some things works considerably faster in the previous release or who notice that Aperture 1.1 really slows down after some time of use.
Enough said, here is my information:
- Powermac G5 Dualcore 2.0
- 2.5 GB RAM
- Nvidia 7800GT (flashed PC version)
- System disk: Software RAID0 (2 WD 10000rpm 74GB Raptor drives)
- Aperture library on a hardware RAID0 (2 Maxtor 160GB drives) connected to Highpoint RocketRAID 2320 PCIe adapter
- Displays: 17" and 15" TFT
I do not think, that we need more information, things like external drives (apart from ones used for the actual library), superdrive types, connected USB stuff like printers, scanners etc. shouldn't make any difference so no need to report that. Also it is self-evident that Mac OS 10.4.6 is used.
Of interest might be any internal cards (PCIe/PCI/PCI-X...) build into your system like my RAID adapter, Decklink cards (wasn't there a report about problems with them?), any other special video or audio cards or additional graphic cards.
Again, please only post here if you're experiencing any of the mentioned problems and please try to keep your information as condensed as possible. This thread is about collecting data, there are already enough other threads where the specific problems (or other general speed issues) are discussed.
Bye,
Carsten
BTW: Within the next week I will perform some tests which will include replacing my 7800GT with the original 6600 and removing as much extra stuff from my system as possible to see if that helps.

Yesterday i had my first decent run in 1.1 and was pleased i avoided a lot perfromance issues that seemed to affect others.
After i posted, i got hit by a big slow-down in system perfromance. I tried to quit Aperture but couldn't, it had no tasks in its activity window. However Activity Monitor showed Aperture as a 30 thread 1.4GB Virtual memory hairball soaking-up 80-90% of my 4 cpu's. Given the high cpu activity i suspected the reason was not my 2GB of RAM, althought its obviously better with more. So what caused the sudded decerease in system perfromance after 6 hours of relative trouble free editing/sorting with 1.1 ?
This morning i re-created the issue. Before i go further, when i ran 1.1 for the first time i did not migrate my whole library to the new raw algorithum (its not called the bleeding edge for nothing). So this morning i selected one project to migrate all its raw images to 1.1 and after the progress bar completed its work, the cpus ramped and system got bogged-down again.
So Aperture is doing a background task that is consuming large amounts of cpu power, shows nothing in its activity monitor and takes a very long time to complete. My project had 89 raw images migrated to the 1.1 algorithum and it took 4 minutes to complete those 'background processes' (more reconstituting of images?). I'm not sure what its doing, but it takes a long time and shows no obvious sign it is normal. If you leave it to complete its work, the system returns to normal. More of an issue is the system allows you to continue to work as the background processes crank, compounding the heavy workload.
Bit of a guess this, but is this what is causing people system's problems ? As i said if i left my quad alone for 4 minutes all returns as normal. Its just not normal to think it will ever end, so you do more and compound the slow-down ?
In the interests of research i did another project migrating 245 8MB raws to the 1.1 algorithum and it took 8 minutes. First 5mins consumed 1GB of virtual memory over 20 threads at average 250% CPU usage for Aperture alone. The last three minutes saw the cpus ramp higher to 350%, virtual memory increase to 1.2GB. After the 8 minutes all returned to nornal and fans slowed down (excellent fan/noise behaviour on these quads).
Is this what others are seeing ?
When you force quit Aperture during these system slow-downs what effect does this having on your images ? Do the uncompleted background processes restart when you go to try and view them ?
If i get time i'll try and compare to my MBP.

Yosemite Performance Problem

Hello,
I have a Macbrook Pro Retina (late 2013) running Yosemite (I updated using the Appstore) with a lot of performance problems :
I can't write a text without frame drops
Showing the notification center takes a long time than usual
Opening finder is a hard task to do, it keeps showing parts of the window
I have a problem with the heat of the Macbook Pro, it doesn't go below 50° even if I'm not running anything at all while the ram the used at 80% all the time.
I can't open mail and chrome at the same time, it makes the macbook completely useless
... I can't do what I'm supposed to do using this Macbook Pro anymore...
Do you think that everyone is having the same problem ? is there any solution to downgrade to Mavericks ? I hate unfinished software, I feel like I'm using A copy of Android or Windows on a Mac,
Regards,
Reda,

You have a botched installation probably due to a defective Mavericks installation that you updated. Since downgrading to Mavericks requires that you erase your hard drive, what you might try is to reinstall Yosemite using the Recovery HD:
Install or Reinstall Mavericks, Mountain Lion, or Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.

Any problems with lion running on core 2 duo 2007 MBPro ?

Curious to hear if anyone has had any problems with Lion before I upgrade.
Thanks.

OK, so this is a shot in the dark, but maybe it's worth a try.
Since the problem only occurs when running on battery, perhaps changing the Energy Saver settings to match the settings used for when it's plugged in will fix the problem. The default settings for how the computer operates are different for the battery and power adaptor. When you unplug the power, the computer automatically shifts to the alternate settings.
So, try this:
-Open System Preferences->Energy Saver
-In the "Settings for" drop-down menu, select "Battery".
-In the "Optimization" drop-down menu, select "Better Performance".
-Under the Sleep tab, choose "Never" for both computer and display sleep and uncheck the box for "Put the hard disk to sleep when possible".
-Under the Options tab, uncheck the first two boxes.
15" MacBook Pro 2.33 GHz Mac OS X (10.4.8)

PL/SQL Performance problem

I am facing a performance problem with my current application (PL/SQL packaged procedure)
My application takes data from 4 temporary tables, does a lot of validation and
puts them into permanent tables.(updates if present else inserts)
One of the temporary tables is parent table and can have 0 or more rows in
the other tables.
I have analyzed all my tables and indexes and checked all my SQLs
They all seem to be using the indexes correctly.
There are 1.6 million records combined in all 4 tables.
I am using Oracle 8i.
How do I determine what is causing the problem and which part is taking time.
Please help.
The skeleton of the code which we have written looks like this
MAIN LOOP ( 255308 records)-- Parent temporary table
-----lots of validation-----
update permanent_table1
if sql%rowcount = 0 then
insert into permanent_table1
Loop2 (0-5 records)-- child temporary table1
-----lots of validation-----
update permanent_table2
if sql%rowcount = 0 then
insert into permanent_table2
end loop2
Loop3 (0-5 records)-- child temporary table2
-----lots of validation-----
update permanent_table3
if sql%rowcount = 0 then
insert into permanent_table3
end loop3
Loop4 (0-5 records)-- child temporary table3
-----lots of validation-----
update permanent_table4
if sql%rowcount = 0 then
insert into permanent_table4
end loop4
-- COMMIT after every 3000 records
END MAIN LOOP
Thanks
Ashwin N.

Do this intead of ditching the PL/SQL.
DECLARE
TYPE NumTab IS TABLE OF NUMBER(4) INDEX BY BINARY_INTEGER;
TYPE NameTab IS TABLE OF CHAR(15) INDEX BY BINARY_INTEGER;
pnums NumTab;
pnames NameTab;
t1 NUMBER(5);
t2 NUMBER(5);
t3 NUMBER(5);
BEGIN
FOR j IN 1..5000 LOOP -- load index-by tables
pnums(j) := j;
pnames(j) := 'Part No. ' || TO_CHAR(j);
END LOOP;
t1 := dbms_utility.get_time;
FOR i IN 1..5000 LOOP -- use FOR loop
INSERT INTO parts VALUES (pnums(i), pnames(i));
END LOOP;
t2 := dbms_utility.get_time;
FORALL i IN 1..5000 -- use FORALL statement
INSERT INTO parts VALUES (pnums(i), pnames(i));
get_time(t3);
dbms_output.put_line('Execution Time (secs)');
dbms_output.put_line('---------------------');
dbms_output.put_line('FOR loop: ' || TO_CHAR(t2 - t1));
dbms_output.put_line('FORALL: ' || TO_CHAR(t3 - t2));
END;
Try this link, http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96624/05_colls.htm#23723

Hello I have imac (27-inch mid 2011) 3.1ghz intel core i5 1tb serial ata hard drive, amd radeon hd 6970m my problem is imac works fine in safe mode,but when you try to startup normal it's connstantly restart by it self.

hello I have imac (27-inch mid 2011) 3.1ghz intel core i5 1tb serial ata hard drive, amd radeon hd 6970m
my problem is
imac works fine in safe mode,
but when you try to startup normal it's connstantly restart by it self.

in safe mode works perfectly,soon as I try to boot in normal mode it's keep restarting.on screen I don't see any line vertical or horizontal picture look normal on safe mode.but unable to start normal it just restarting over and over.I try another HDD but same things happen,I replace memory but still same.works ok in safe mode but not in normal mode.I will try to post system error report.

Performance problem in Zstick report...

Hi Experts,
I am facing performance problem in Custoom Stock report of Material Management.
In this report i am fetching all the materials with its batches to get the desired output, at a time this report executes 36,000 plus unique combination of material and batch.
This report takes around 30 mins to execute. And this report is to be viewed regularly in every 2 hours.
To read the batch characteristics value I am using FM -> '/SAPMP/CE1_BATCH_GET_DETAIL'
Is there any way out to increase the performance of this report, the output of the report is in ALV.
May i have any refresh button in the report so that data may get refreshed automatically without executing it again. or is there any cache memory concept.
Note: I have declared all the itabs with type sorted, all the select queries are fetched with key and index.
Thanks
Rohit Gharwar

Hello,
SE30 is old. Switch on trace on ST12 while running this progarm and identify where exactly most of the time is being spent. If you see high CPU time this problem with the ABAP code. You can exactly figure out the program/function module from ST12 trace where exactly time is being spent. If you see high database time in ST12, problem is with database related issue. So basically you have to analyze sql statement from performance traces in ST12. These could resolve your issue.
Yours Sincerely
Dileep

SQL report performance problem

I have a SQL classic report in Apex 4.0.2 and database 11.2.0.2.0 with a performance problem.
The report is based on a PL/SQL function returning a query. The query is based on a view and pl/sql functions. The Apex parsing schema has select grant on the view only, not the underlying objects.
The generated query runs in 1-2 sec in sqlplus (logged in as the Apex parsing schema user), but takes many minutes in Apex. I have found, by monitoring the database sessions via TOAD, that the explain plan in the Apex and sqlplus sessions are very different.
The summary:
In sqlplus SELECT STATEMENT ALL_ROWS Cost: 3,695
In Apex SELECT STATEMENT ALL_ROWS Cost: 3,108,551
What could be the cause of this?
I found a blog and Metalink note about different explain plans for different users. They suggested to set optimizer_secure_view_merging='FALSE', but that didn't help.

Hmmm, it runs fast again in SQL Workshop. I didn't expect that, because both the application and SQL Workshop use SYS.DBMS_SYS_SQL to parse the query.
Only the explain plan doesn't show anything.
To add: I changed the report source to the query the pl/sql function would generate, so the selects are the same in SQL Workshop and in the application. Still in the application it's horribly slow.
So, Apex does do something different in the application compared to SQL Workshop.
Edited by: InoL on Aug 5, 2011 4:50 PM

Performance problem with WPF Viewer CRVS2010

Hi,
We are using Crystal Reports 2010 and the new WPF Viewer. Last week when we set up a test machine to run our integration tests (several hundred) all report tests failed (about 30 tests) with a timeout exception.
The testmachine setup:
HP DL 580 G5
WMWare ESXi 4.0
Guest OS: Windows 7 Enterprise 64-bit
Memory (guest OS): 3GB
CPU: 1
Visual Studio 2010
Crystal Reports for Visual Studio 2010 with 64 bit runtime installed
Visual Studio 2008 installed
Microsoft Office 2010 installed
Macafee antivirus
There are about 10 other virtual machines on the same HW.
I think the performance problem is related to text obejcts on a report document viewed in a WPF Viewer. I made a simple WPF GUI with 2 buttons and the first button executes a very simple report that only has a text object with a few words in it and the other button is also a simple report with only 1 text object with approx. 100 words (about 800 charchters).
The first report executes and displays almost instantly and the second report executes instantantly but displays after approx. 1 min 30 sec.
And execute in this context means that all VB.Net code runs in the compiler without any exception or performance problem. The performance problem seems to come after viewer.Show() (in the code below) has executed.
I did another test on the second report and replaced the text obejct with a formula field with the same text as the text object and this test executed and displayed the report instantly.
So the performance problem seems to have something to do with rendering of textobjects in the WPF Viewer on a virtual machine with the above setup.
I've made several tests on local machines with Windows XP (32 bit) or Winows 7 (64 bit) installed and none of them have this performance problem. Its not a critical issue for us because our users will run this application on their local PCs with Windows 7 64-bit but its a bit problematic for our project not being able to run all of our integration tests but I will probably solve this by using a local PC instead.
Here is the VB.Net code Im using to View the reports:
Private Sub LightWeight_Click(ByVal sender As System.Object, ByVal e As System.Windows.RoutedEventArgs)
        Dim lightWeightReport As New CrystalDecisions.CrystalReports.Engine.ReportDocument
        lightWeightReport.Load(Environment.CurrentDirectory & "\LightWeight.rpt")
        ' Initialize Viewer
        Dim viewer As LF.LIV.PEAAT.Crystal.Views.ReportViewer = New LF.LIV.PEAAT.Crystal.Views.ReportViewer()
        viewer.Owner = Me
        viewer.reportViewer.ViewerCore.ReportSource = lightWeightReport
        viewer.Show()
    End Sub
    Private Sub LightWeightSlow_Click(ByVal sender As System.Object, ByVal e As System.Windows.RoutedEventArgs)
        Dim lightWeightReport As New CrystalDecisions.CrystalReports.Engine.ReportDocument
        lightWeightReport.Load(Environment.CurrentDirectory & "\LightWeightSlow.rpt")
        ' Initialize Viewer
        Dim viewer As LF.LIV.PEAAT.Crystal.Views.ReportViewer = New LF.LIV.PEAAT.Crystal.Views.ReportViewer()
        viewer.Owner = Me
        viewer.reportViewer.ViewerCore.ReportSource = lightWeightReport
        viewer.Show()
    End Sub
The reports are 2 empty default reports with only 1 textobject on the details section.
// Thomas

See if the KB [
[1448013 - Connecting to Oracle database. Error; Failed to load database information|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433343338333033313333%7D.do] helps.
Also the following may not hurt to have a look at (if only for ideas):
[1217021 - Err Msg: "Unable to connect invalid log on parameters" using Oracle in VS .NET|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313337333033323331%7D.do]
[1471508 - Logon error when connecting to Oracle database in a VS .NET application|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333433373331333533303338%7D.do]
[1196712 - Error: "Failed to load the oci.dll" in ASP.NET application against an Oracle database|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333133393336333733313332%7D.do]
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

JRC 2: Performance Problem

Hi.
Our reporting component used JRC 1.x before we upgraded to JRC 2.x. We got two issues after upgrading.
First issue I solved already with a workaround which I published on stackoverflow.com. (1) Does anyone knows where I will find the issue management system to report this issue?
Second issue occurs big performance problem within our project. We opened a report with 6 subreports (which includes 1 upto 3 tables) in 2-4 seconds using JRC 1. If we will open same report using JRC 2, we wait upto 60 seconds.
This methods requires more time with JRC 2 comparing to JRC 1:
ReportClientDocument#open(String, int);
SubreportController#setTableLocation(String, ITable, ITable)
DatabaseController#setTableLocation(ITable, ITable)
Each invocation of one of these methods requires 2-4 seconds.
Thank you in advance.
Best regards
Thomas
(1) http://stackoverflow.com/questions/479405/replace-a-database-connection-for-subreports-with-jrc

hello ....
my report is ''crystal report 11'' => "OLE DB" => "Add Command(select * from table) " .
code(JRC) : eclipse + crystal report for eclipse version 2 => "cr4e-all-in-one-win_2.0.1.zip"
<%@ page contentType="text/html; charset=UTF-8"
import="
com.crystaldecisions.report.web.viewer.CrystalReportViewer,
com.crystaldecisions.reports.sdk.ReportClientDocument,
com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase,
java.sql.Connection,
java.sql.DriverManager,
java.sql.ResultSet,
java.sql.SQLException,
java.sql.Statement" %>
<%
     try {
          String reportName = "report.rpt";
          ReportClientDocument clientDoc = new ReportClientDocument();
          clientDoc.open(reportName, 0);
          String tableAlias = "Command";
          clientDoc.getDatabaseController().setDataSource(myResult("SELECT * FROM table"), tableAlias,tableAlias);
          CrystalReportViewer crystalReportPageViewer = new CrystalReportViewer();
          crystalReportPageViewer.setReportSource(clientDoc.getReportSource());
          crystalReportPageViewer.processHttpRequest(request, response, application, null);
     } catch (ReportSDKExceptionBase e) {
          e.printStackTrace();
         out.println(e);
%>
I simplified the code, *myResult("SELECT * FROM table") * is absolutely no problem ,
and this code is absolutely no problem in the "crystal report for eclipse "version 1
but in version 2 run error:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: u7121u6CD5u9810u671Fu7684u8CC7u6599u5EABu9023u7DDAu5668u932Fu8AA4---- Error code:-2147467259 Error code name:failed
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(Unknown Source)
     at com.crystaldecisions.reports.common.ThreadGuard.syncExecute(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.for(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
     at com.businessobjects.sdk.erom.jrc.a.a(Unknown Source)
     at com.businessobjects.sdk.erom.jrc.a.execute(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.execute(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.CommunicationChannel.a(Unknown Source)
     at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.if(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.new(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.b9.onDataSourceChanged(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setDataSource(Unknown Source)
     at org.apache.jsp.No_005f1.Eclipse_005fJTDS_005fSQL2005_005fTable_002dviewer_jsp._jspService(Eclipse_005fJTDS_005fSQL2005_005fTable_002dviewer_jsp.java:106)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:374)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:845)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
     at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
     at java.lang.Thread.run(Unknown Source)
Caused by: com.crystaldecisions.reports.common.QueryEngineException: u7121u6CD5u9810u671Fu7684u8CC7u6599u5EABu9023u7DDAu5668u932Fu8AA4
     at com.crystaldecisions.reports.queryengine.Connection.bf(Unknown Source)
     at com.crystaldecisions.reports.queryengine.Rowset.z3(Unknown Source)
     at com.crystaldecisions.reports.queryengine.Rowset.bL(Unknown Source)
     at com.crystaldecisions.reports.queryengine.Rowset.zM(Unknown Source)
     at com.crystaldecisions.reports.queryengine.Connection.a(Unknown Source)
     at com.crystaldecisions.reports.queryengine.Table.a(Unknown Source)
     at com.crystaldecisions.reports.queryengine.Table.if(Unknown Source)
     at com.crystaldecisions.reports.queryengine.Table.try(Unknown Source)
     at com.crystaldecisions.reports.queryengine.Table.a(Unknown Source)
     at com.crystaldecisions.reports.queryengine.Table.u7(Unknown Source)
     at com.crystaldecisions.reports.datafoundation.DataFoundation.a(Unknown Source)
     at com.crystaldecisions.reports.dataengine.dfadapter.DFAdapter.a(Unknown Source)
     at com.crystaldecisions.reports.dataengine.dfadapter.CheckDatabaseHelper.a(Unknown Source)
     at com.crystaldecisions.reports.dataengine.datafoundation.CheckDatabaseCommand.new(Unknown Source)
     at com.crystaldecisions.reports.common.CommandManager.a(Unknown Source)
     at com.crystaldecisions.reports.common.Document.a(Unknown Source)
     at com.crystaldecisions.reports.dataengine.VerifyDatabaseCommand.new(Unknown Source)
     at com.crystaldecisions.reports.common.CommandManager.a(Unknown Source)
     at com.crystaldecisions.reports.common.Document.a(Unknown Source)
     at com.businessobjects.reports.sdk.requesthandler.f.a(Unknown Source)
     at com.businessobjects.reports.sdk.requesthandler.DatabaseRequestHandler.a(Unknown Source)
     at com.businessobjects.reports.sdk.requesthandler.DatabaseRequestHandler.if(Unknown Source)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(Unknown Source)
     ... 39 more
Please help me and tell me why....

Performance problem with S873,S691,S679,S716

Hi All,
I am using tables S873,S691,S679,S716 in my report. Since these have huge data its creating performance problem. Right now i am selecting data from tables as Select single.. in Loop.. endloop.
If i try to get it out and use FOR ALL ENTRIES, its taking longer time.
I dont have all keys with me and i m trying to use index whereever possible.
Any hints, comments are really appreciable.
My code goes like this.
This is not a full code... only a part where i am fetching data from 'S' tables.
loop at i_mvke.
SELECT kunnr zzobklgq zzcbklgq
FROM s679 INTO
(s679-kunnr,s679-zzobklgq,s679-zzcbklgq) WHERE
matnr EQ i_mvke-matnr AND
vrsio EQ p_versn AND
sptag IN s_billed AND
werks EQ p_werks AND
vkorg EQ i_mvke-vkorg AND
kunnr IN s_kunnr.
SELECT SUM( zznslqty ) FROM s691 INTO
w_s691_net_bill_qty WHERE
Use index Z5
matnr EQ i_mvke-matnr AND
spmon EQ w_spmon AND
vrsio EQ p_versn AND
werks EQ p_werks AND
vkorg EQ i_mvke-vkorg AND
kunnr IN s_kunnr."
SELECT SUM( zznslqty ) SUM( zzninvnum ) FROM s873 INTO
(work01-zznslqty, work01-zzninvnum) WHERE
use index Z02
vkorg EQ i_mvke-vkorg AND
werks EQ p_werks AND
matnr EQ i_mvke-matnr AND
sptag IN s_billed AND
vrsio EQ p_versn AND
kunnr IN s_kunnr.
SELECT zcrdotov FROM s716 INTO s716-zcrdotov WHERE
matnr EQ i_mvke-matnr AND
sptag IN s_billed AND
vkorg EQ i_mvke-vkorg AND
kunnr IN s_kunnr AND
werks = p_werks AND
vrsio EQ p_versn.
GET THE RECORD TOTAL
ADD 1 TO w_s716_total_count.
GET THE ONTIME TOTAL
IF s716-zcrdotov = 1.
ADD 1 TO w_s716_ontime_count.
ENDIF.
ENDSELECT.
PERFORM fill_output_table.
endloop. "i_mvke
Message was edited by: Agasti Kale

hi
good
wrong->
SELECT kunnr zzobklgq zzcbklgq
FROM s679 INTO
(s679-kunnr,s679-zzobklgq,s679-zzcbklgq) WHERE
matnr EQ i_mvke-matnr AND
vrsio EQ p_versn AND
sptag IN s_billed AND
werks EQ p_werks AND
vkorg EQ i_mvke-vkorg AND
kunnr IN s_kunnr.
write->
SELECT kunnr zzobklgq zzcbklgq
FROM s679 INTO CORRESPONDING FIELDS OF TABLE I_MVKE
WHERE
matnr EQ i_mvke-matnr AND
vrsio EQ p_versn AND
sptag IN s_billed AND
werks EQ p_werks AND
vkorg EQ i_mvke-vkorg AND
kunnr IN s_kunnr.
do the changes accordingly in the below select statements. you have not post the detail report otherwise i could have help you in other select statements also.
thanks
mrutyun

Performance problem in ABAP code

hai guys,
I created report using tables like bsis,t001 etc,( tax report).
I have performance problem in this report.
COuld you pls tell me how to analyse the report and find out the place where process is taking more memory etc.
i did abap trace and runtime analysis..but could not find out exact point.
how to do this..
i want to analysis each subroutine,internal table and query process.
could you pls give me some ideas.
ambichan

There is an excellent tool available in SAP - <b>Code Inspector.
</b>
Transaction is SCII
Try the following link and I am sure you will find a bunch of useful documents.
<a href="http://www.google.co.in/search?hl=en&safe=off&q=site%3Asdn.sap.comfiletype%3ApdfCode+Inspector&btnG=Search&meta=">ABAP Performance</a>
I use the Code Inspector to search for
a) All the select statements which are present within the loop
b) Nested Loops
c) Select query without providing criteria for primary keys, depending upon situation
d) Can the search be narrowed with extra conditions
e) Using READ .. BINARY SEARCH if internal table has lots of records.
The list is actually endless, but this is something to start with.
You can actually have a checklist, and depending upon it, go through your code. The more you adhere to checklist, you will find that, the performance would dramatically improve.
Also use <b>ST05</b> transaction, for SQL Trace and find out which select query is taking the maximum time for response.
Regards,
Subramanian V.

Radeon HD 6490M performance problem in Lion

Similar Messages

Maybe you are looking for