Radeon "HD" feature
How do I know if the "HD" feature of Radeon HD graphics is being used?
When I play one of my HD movie with my new iMac, the playback still goes choppy as it does with my old iMac (without Radeon "HD" graphics).
You may not have enough RAM in your system then. If you have 1Gb then it is most likely the culprit. RAM is super cheap now (like $50 or less for 2Gb) and will make a huge difference with HD playback, editing especially.
I was one of the first to get the iPhone in Canada
Similar Messages
-
Hi
I'm trying to install an ATI Radeon (256 Mb) video card on my MSI board (MS - 6787 Via ProSavage DDR Chipset) but when I power up the PC it doesn't boot. What should I do??
I've tried before with a Riva TNT- 2 (64Mb) but it didn't work either.
I've tried already desabling onboard graphics, but It didn't work any way. System just doesn't boot and I get no beeps whatsoever... After doing this, had to flash my bios because after uninstalling the external video card, the system booted but didn't get any video.
The video card is a Radeon 9550 256Mb
Thanks
MS-6787 VIA® ProSavageDDR™ P4M266A Chipset
Intel Pentium IV 2.80 Ghz
1 X Kingston PC2100 512MB 266MHz DDR Non-ECC CL2 DIMM
PSU: Model No. LPJ2-18 350W 3.3v/32A 5v/32A 12v/22A
MAXTOR DiamondMax ATA 133 7200 RPM 120Gb
Western Digital ATA 133 7200 RPM 20Gb
BenQ CD 52X
LG DVD - RW
Windows XP Professional SP3I've been reading about the Radeon 9550 features but my P4MAM-L mainboard seems to support 4x AGP cards, so I think it must work with it too.
'll try to upgrade my bios and then get back to you
MS-6787 VIA® ProSavageDDR™ P4M266A Chipset
Intel Pentium IV 2.80 Ghz
1 X Kingston PC2100 512MB 266MHz DDR Non-ECC CL2 DIMM
PSU: Model No. LPJ2-18 350W 3.3v/32A 5v/32A 12v/22A
MAXTOR DiamondMax SATA 300 7200 RPM 120Gb
Western Digital ATA 133 7200 RPM 20Gb
BenQ CD 52X
LG DVD - RW
Windows XP Professional SP3 -
Why AMD Radeon HD 6850 is not supported in Premiere Pro CC GPU Accelerated Features?
Even the weaker AMD Radeon HD 6750 is supported...
How do I find out if there is a plan to support it in the future?
RegardsWhile a few employees do read in some of these user to user forums, most of the people here are other users
As such, we do not know Adobe's current or future plans -
Xorg 1.8.1.902 & Catalyst 10.6-5 & Mobility Radeon HD 2600
Hello all,
I'm reporting in with an error that I can't seem to shake since the Xorg 1.8 and Catalyst 10.6 release. I have been unable to get the two to place nice with the Mobility Radeon HD 2600 in my HP Compaq 8510p notebook. I've followed the instructions on the Arch ATI Catalyst wiki using the repository approach. Everything installs correctly and I've configured the xorg.conf as instructed in the wiki. I actually just delete the existing xorg.conf and run aticonfig --initial, but still no dice. I've made sure that I have the fglrx module loaded in my rc.conf.
When GDM tries to start, it freaks out with the screen flashing a few times and then crashes saying too many attempts to start X. I login and try to start X manually and it produces the following log file:
[ 24.874]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 24.874]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 24.874] X Protocol Version 11, Revision 0
[ 24.874] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 24.874] Current Operating System: Linux gizmo 2.6.34-ARCH #1 SMP PREEMPT Mon Jul 5 22:12:11 CEST 2010 x86_64
[ 24.874] Kernel command line: root=/dev/disk/by-uuid/56888501-5e9b-4251-8d84-20eee8a125ce ro nomodeset
[ 24.875] Build Date: 21 June 2010 12:01:49PM
[ 24.875]
[ 24.875] Current version of pixman: 0.18.2
[ 24.875] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 24.875] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 24.875] (==) Log file: "/var/log/Xorg.1.log", Time: Fri Jul 23 19:47:16 2010
[ 24.875] (==) Using config file: "/etc/X11/xorg.conf"
[ 24.876] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 24.876] (==) ServerLayout "aticonfig Layout"
[ 24.876] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 24.876] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 24.876] (**) | |-->Device "aticonfig-Device[0]-0"
[ 24.876] (==) Automatically adding devices
[ 24.877] (==) Automatically enabling devices
[ 24.877] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 24.877] Entry deleted from font path.
[ 24.877] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 24.877] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 24.877] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 24.877] (II) Loader magic: 0x7ce880
[ 24.877] (II) Module ABI versions:
[ 24.877] X.Org ANSI C Emulation: 0.4
[ 24.877] X.Org Video Driver: 7.0
[ 24.877] X.Org XInput driver : 9.0
[ 24.877] X.Org Server Extension : 3.0
[ 24.888] (--) PCI:*(0:1:0:0) 1002:9581:103c:30c5 ATI Technologies Inc M76 [Radeon Mobility HD 2600 Series] rev 0, Mem @ 0xd0000000/268435456, 0xe4400000/65536, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
[ 24.888] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 24.888] (II) "extmod" will be loaded by default.
[ 24.888] (II) "dbe" will be loaded by default.
[ 24.888] (II) "glx" will be loaded by default.
[ 24.888] (II) "record" will be loaded by default.
[ 24.888] (II) "dri" will be loaded by default.
[ 24.888] (II) "dri2" will be loaded by default.
[ 24.888] (II) LoadModule: "extmod"
[ 24.888] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 24.888] (II) Module extmod: vendor="X.Org Foundation"
[ 24.888] compiled for 1.8.1.902, module version = 1.0.0
[ 24.888] Module class: X.Org Server Extension
[ 24.888] ABI class: X.Org Server Extension, version 3.0
[ 24.888] (II) Loading extension MIT-SCREEN-SAVER
[ 24.888] (II) Loading extension XFree86-VidModeExtension
[ 24.888] (II) Loading extension XFree86-DGA
[ 24.888] (II) Loading extension DPMS
[ 24.888] (II) Loading extension XVideo
[ 24.888] (II) Loading extension XVideo-MotionCompensation
[ 24.888] (II) Loading extension X-Resource
[ 24.888] (II) LoadModule: "dbe"
[ 24.888] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 24.888] (II) Module dbe: vendor="X.Org Foundation"
[ 24.888] compiled for 1.8.1.902, module version = 1.0.0
[ 24.888] Module class: X.Org Server Extension
[ 24.889] ABI class: X.Org Server Extension, version 3.0
[ 24.889] (II) Loading extension DOUBLE-BUFFER
[ 24.889] (II) LoadModule: "glx"
[ 24.889] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 24.889] (II) Module glx: vendor="FireGL - ATI Technologies Inc."
[ 24.889] compiled for 7.5.0, module version = 1.0.0
[ 24.889] (II) Loading extension GLX
[ 24.889] (II) LoadModule: "record"
[ 24.889] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 24.889] (II) Module record: vendor="X.Org Foundation"
[ 24.889] compiled for 1.8.1.902, module version = 1.13.0
[ 24.889] Module class: X.Org Server Extension
[ 24.889] ABI class: X.Org Server Extension, version 3.0
[ 24.889] (II) Loading extension RECORD
[ 24.889] (II) LoadModule: "dri"
[ 24.889] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 24.889] (II) Module dri: vendor="X.Org Foundation"
[ 24.889] compiled for 1.8.1.902, module version = 1.0.0
[ 24.889] ABI class: X.Org Server Extension, version 3.0
[ 24.889] (II) Loading extension XFree86-DRI
[ 24.889] (II) LoadModule: "dri2"
[ 24.889] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 24.889] (II) Module dri2: vendor="X.Org Foundation"
[ 24.889] compiled for 1.8.1.902, module version = 1.2.0
[ 24.889] ABI class: X.Org Server Extension, version 3.0
[ 24.889] (II) Loading extension DRI2
[ 24.890] (II) LoadModule: "fglrx"
[ 24.890] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 24.898] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 24.898] compiled for 1.7.1, module version = 8.74.4
[ 24.898] Module class: X.Org Video Driver
[ 24.898] (II) Loading sub module "fglrxdrm"
[ 24.899] (II) LoadModule: "fglrxdrm"
[ 24.899] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 24.899] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 24.899] compiled for 1.7.1, module version = 8.74.4
[ 24.899] (II) ATI Proprietary Linux Driver Version Identifier:8.74.4
[ 24.899] (II) ATI Proprietary Linux Driver Release Identifier: 8.741
[ 24.899] (II) ATI Proprietary Linux Driver Build Date: May 27 2010 12:52:57
[ 24.899] (--) using VT number 7
[ 24.900] (II) Primary Device is: PCI 01@00:00:0
[ 24.900] (WW) Falling back to old probe method for fglrx
[ 24.904] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 24.904] (--) Chipset Supported AMD Graphics Processor (0x9581) found
[ 24.905] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 24.905] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 24.905] (II) AMD Video driver is signed
[ 24.905] (II) fglrx(0): pEnt->device->identifier=0x1dcbc70
[ 24.905] (II) fglrx(0): === [atiddxPreInit] === begin
[ 24.905] (II) Loading sub module "vgahw"
[ 24.905] (II) LoadModule: "vgahw"
[ 24.905] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 24.905] (II) Module vgahw: vendor="X.Org Foundation"
[ 24.905] compiled for 1.8.1.902, module version = 0.1.0
[ 24.905] ABI class: X.Org Video Driver, version 7.0
[ 24.905] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 24.905] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 24.905] (==) fglrx(0): Default visual is TrueColor
[ 24.905] (**) fglrx(0): Option "DPMS" "true"
[ 24.905] (==) fglrx(0): RGB weight 888
[ 24.905] (II) fglrx(0): Using 8 bits per RGB
[ 24.905] (==) fglrx(0): Buffer Tiling is ON
[ 24.905] (II) Loading sub module "fglrxdrm"
[ 24.905] (II) LoadModule: "fglrxdrm"
[ 24.906] (II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 24.907] ukiDynamicMajor: found major device number 253
[ 24.907] ukiDynamicMajor: found major device number 253
[ 24.907] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 24.907] ukiOpenDevice: node name is /dev/ati/card0
[ 24.907] ukiOpenDevice: open result is 10, (OK)
[ 24.907] ukiOpenByBusid: ukiOpenMinor returns 10
[ 24.907] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 24.907] (==) fglrx(0): NoAccel = NO
[ 24.907] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 24.907] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 2600" (Chipset = 0x9581)
[ 24.907] (--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x30c5)
[ 24.907] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 24.907] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 24.907] (--) fglrx(0): MMIO registers at 0xe4400000
[ 24.907] (--) fglrx(0): I/O port at 0x00004000
[ 24.907] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 24.907] (II) fglrx(0): AC Adapter is used
[ 24.909] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 25.033] (II) Loading sub module "vbe"
[ 25.033] (II) LoadModule: "vbe"
[ 25.033] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 25.033] (II) Module vbe: vendor="X.Org Foundation"
[ 25.033] compiled for 1.8.1.902, module version = 1.1.0
[ 25.033] ABI class: X.Org Video Driver, version 7.0
[ 25.033] (II) fglrx(0): VESA BIOS detected
[ 25.033] (II) fglrx(0): VESA VBE Version 3.0
[ 25.033] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 25.033] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 25.033] (II) fglrx(0): VESA VBE OEM Software Rev: 10.56
[ 25.033] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 25.033] (II) fglrx(0): VESA VBE OEM Product: M76M
[ 25.033] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 25.063] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 25.063] (--) fglrx(0): Video RAM: 262144 kByte, Type: DDR3
[ 25.063] (II) fglrx(0): PCIE card detected
[ 25.063] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 25.063] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 25.065] (II) fglrx(0): Using adapter: 1:0.0.
[ 25.097] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
[ 25.129] (II) fglrx(0): Interrupt handler installed at IRQ 33.
[ 25.129] (II) fglrx(0): RandR 1.2 support is enabled!
[ 25.129] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 25.129] (==) fglrx(0): Center Mode is disabled
[ 25.129] (II) Loading sub module "fb"
[ 25.129] (II) LoadModule: "fb"
[ 25.129] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 25.129] (II) Module fb: vendor="X.Org Foundation"
[ 25.129] compiled for 1.8.1.902, module version = 1.0.0
[ 25.129] ABI class: X.Org ANSI C Emulation, version 0.4
[ 25.129] (II) Loading sub module "ddc"
[ 25.129] (II) LoadModule: "ddc"
[ 25.129] (II) Module "ddc" already built-in
[ 25.395] (II) fglrx(0): Finished Initialize PPLIB!
[ 25.397] (II) Loading sub module "ddc"
[ 25.397] (II) LoadModule: "ddc"
[ 25.397] (II) Module "ddc" already built-in
[ 25.397] (II) fglrx(0): Connected Display0: LCD on internal LVDS [lvds]
[ 25.397] (II) fglrx(0): Display0 EDID data ---------------------------
[ 25.397] (II) fglrx(0): Manufacturer: CMO Model: 1520 Serial#: 0
[ 25.397] (II) fglrx(0): Year: 1990 Week: 0
[ 25.397] (II) fglrx(0): EDID Version: 1.3
[ 25.397] (II) fglrx(0): Digital Display Input
[ 25.397] (II) fglrx(0): Max Image Size [cm]: horiz.: 33 vert.: 20
[ 25.397] (II) fglrx(0): Gamma: 2.20
[ 25.397] (II) fglrx(0): No DPMS capabilities specified
[ 25.397] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 25.397] (II) fglrx(0): First detailed timing is preferred mode
[ 25.397] (II) fglrx(0): redX: 0.626 redY: 0.354 greenX: 0.294 greenY: 0.589
[ 25.397] (II) fglrx(0): blueX: 0.144 blueY: 0.097 whiteX: 0.309 whiteY: 0.329
[ 25.397] (II) fglrx(0): Manufacturer's mask: 0
[ 25.397] (II) fglrx(0): Supported detailed timing:
[ 25.397] (II) fglrx(0): clock: 131.5 MHz Image Size: 331 x 207 mm
[ 25.397] (II) fglrx(0): h_active: 1680 h_sync: 1771 h_sync_end 1831 h_blank_end 1978 h_border: 0
[ 25.397] (II) fglrx(0): v_active: 1050 v_sync: 1056 v_sync_end 1068 v_blanking: 1108 v_border: 0
[ 25.397] (II) fglrx(0): N154Z1-L01
[ 25.397] (II) fglrx(0): CMO
[ 25.397] (II) fglrx(0): N154Z1-L01
[ 25.397] (II) fglrx(0): EDID (in hex):
[ 25.397] (II) fglrx(0): 00ffffffffffff000daf201500000000
[ 25.397] (II) fglrx(0): 00000103802114780a77f1a05a4b9624
[ 25.397] (II) fglrx(0): 184f5400000001010101010101010101
[ 25.397] (II) fglrx(0): 0101010101015e33902a611a3a405b3c
[ 25.397] (II) fglrx(0): 6c004bcf10000018000000fe004e3135
[ 25.397] (II) fglrx(0): 345a312d4c30310a2020000000fe0043
[ 25.397] (II) fglrx(0): 4d4f0a202020202020202020000000fe
[ 25.397] (II) fglrx(0): 004e3135345a312d4c30310a202000f2
[ 25.397] (II) fglrx(0): End of Display0 EDID data --------------------
[ 25.397] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[ 25.397] (II) fglrx(0): Output DFP1 has no monitor section
[ 25.397] (II) fglrx(0): Output DFP2 has no monitor section
[ 25.397] (II) fglrx(0): Output CRT1 has no monitor section
[ 25.397] (II) fglrx(0): Output TV has no monitor section
[ 25.397] (II) fglrx(0): Output COMPONENT_VIDEO has no monitor section
[ 25.552] (II) fglrx(0): EDID vendor "CMO", prod id 5408
[ 25.552] (II) fglrx(0): Printing DDC gathered Modelines:
[ 25.553] (II) fglrx(0): Modeline "1680x1050"x0.0 131.50 1680 1771 1831 1978 1050 1056 1068 1108 -hsync -vsync (66.5 kHz)
[ 25.553] (II) fglrx(0): Output LVDS connected
[ 25.553] (II) fglrx(0): Output DFP1 disconnected
[ 25.553] (II) fglrx(0): Output DFP2 disconnected
[ 25.553] (II) fglrx(0): Output CRT1 disconnected
[ 25.553] (II) fglrx(0): Output TV disconnected
[ 25.553] (II) fglrx(0): Output COMPONENT_VIDEO disconnected
[ 25.553] (II) fglrx(0): Using exact sizes for initial modes
[ 25.553] (II) fglrx(0): Output LVDS using initial mode 1680x1050
[ 25.553] (II) fglrx(0): Display dimensions: (330, 200) mm
[ 25.553] (II) fglrx(0): DPI set to (129, 133)
[ 25.553] (II) fglrx(0): Adapter ATI Mobility Radeon HD 2600 has 2 configurable heads and 1 displays connected.
[ 25.553] (==) fglrx(0): QBS disabled
[ 25.553] (==) fglrx(0): PseudoColor visuals disabled
[ 25.553] (II) Loading sub module "ramdac"
[ 25.553] (II) LoadModule: "ramdac"
[ 25.553] (II) Module "ramdac" already built-in
[ 25.553] (==) fglrx(0): NoDRI = NO
[ 25.553] (==) fglrx(0): Capabilities: 0x00000000
[ 25.553] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 25.553] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 25.553] (==) fglrx(0): UseFastTLS=0
[ 25.553] (==) fglrx(0): BlockSignalsOnLock=1
[ 25.553] (--) Depth 24 pixmap format is 32 bpp
[ 25.553] (II) Loading extension ATIFGLRXDRI
[ 25.553] (II) fglrx(0): doing swlDriScreenInit
[ 25.553] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 25.553] ukiDynamicMajor: found major device number 253
[ 25.553] ukiDynamicMajor: found major device number 253
[ 25.553] ukiDynamicMajor: found major device number 253
[ 25.553] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 25.553] ukiOpenDevice: node name is /dev/ati/card0
[ 25.553] ukiOpenDevice: open result is 15, (OK)
[ 25.553] ukiOpenByBusid: ukiOpenMinor returns 15
[ 25.553] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 25.553] (II) fglrx(0): [uki] DRM interface version 1.0
[ 25.553] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 25.553] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x10000
[ 25.553] (II) fglrx(0): [uki] mapped SAREA 0x10000 to 0x7f2043e35000
[ 25.553] (II) fglrx(0): [uki] framebuffer handle = 0x11000
[ 25.554] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 25.554] (II) fglrx(0): swlDriScreenInit done
[ 25.554] (II) fglrx(0): Kernel Module Version Information:
[ 25.554] (II) fglrx(0): Name: fglrx
[ 25.554] (II) fglrx(0): Version: 8.74.4
[ 25.554] (II) fglrx(0): Date: May 27 2010
[ 25.554] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 25.554] (II) fglrx(0): Kernel Module version matches driver.
[ 25.554] (II) fglrx(0): Kernel Module Build Time Information:
[ 25.554] (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.34-ARCH
[ 25.554] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 25.554] (II) fglrx(0): Build-Kernel __SMP__: no
[ 25.554] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 25.554] (II) fglrx(0): [uki] register handle = 0x00012000
[ 25.571] (II) fglrx(0): Display width adjusted to to 1792 due to alignment constraints
[ 25.571] (II) fglrx(0): DRI initialization successfull!
[ 25.571] (II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x010a0000
[ 25.571] (II) fglrx(0): FBMM initialized for area (0,0)-(1792,2432)
[ 25.571] (II) fglrx(0): FBMM auto alloc for area (0,0)-(1792,1792) (front color buffer - assumption)
[ 25.571] (II) fglrx(0): Largest offscreen area available: 1792 x 640
[ 25.571] (==) fglrx(0): Backing store disabled
[ 25.571] (II) Loading extension FGLRXEXTENSION
[ 25.572] (**) fglrx(0): DPMS enabled
[ 25.572] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 25.572] (**) fglrx(0): Textured Video is enabled.
[ 25.572] (II) LoadModule: "glesx"
[ 25.572] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 25.572] (II) Module glesx: vendor="X.Org Foundation"
[ 25.572] compiled for 1.7.1, module version = 1.0.0
[ 25.573] (II) Loading extension GLESX
[ 25.573] (II) fglrx(0): GLESX enableFlags = 592
[ 25.573] (II) fglrx(0): GLESX is enabled
[ 25.573] (II) fglrx(0): Acceleration enabled
[ 25.573] (II) LoadModule: "amdxmm"
[ 25.573] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 25.573] (II) Module amdxmm: vendor="X.Org Foundation"
[ 25.573] compiled for 1.7.1, module version = 1.0.0
[ 25.573] (II) Loading extension AMDXVOPL
[ 25.575] (II) fglrx(0): UVD2 feature is available
[ 25.577] (II) fglrx(0): Enable composite support successfully
[ 25.577] (WW) fglrx(0): Option "VendorName" is not used
[ 25.577] (WW) fglrx(0): Option "ModelName" is not used
[ 25.577] (II) fglrx(0): X context handle = 0x1
[ 25.577] (II) fglrx(0): [DRI] installation complete
[ 25.577] (==) fglrx(0): Silken mouse enabled
[ 25.577] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 25.577] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 25.577] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[ 25.577] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[ 25.579] (II) fglrx(0): Cannot get TV Format. Set all TV geometry value to zero!
[ 25.579] (II) fglrx(0): Cannot set TV horizontal size.
[ 25.579] (II) fglrx(0): Cannot get TV Format for trying to adjust horizontal position after horizontal size changed.
[ 25.579] (II) fglrx(0): Cannot set TV horizontal position.
[ 25.579] (II) fglrx(0): Cannot set TV vertical position.
[ 25.614] (--) RandR disabled
[ 25.614] (II) Initializing built-in extension Generic Event Extension
[ 25.614] (II) Initializing built-in extension SHAPE
[ 25.614] (II) Initializing built-in extension MIT-SHM
[ 25.614] (II) Initializing built-in extension XInputExtension
[ 25.614] (II) Initializing built-in extension XTEST
[ 25.614] (II) Initializing built-in extension BIG-REQUESTS
[ 25.614] (II) Initializing built-in extension SYNC
[ 25.614] (II) Initializing built-in extension XKEYBOARD
[ 25.614] (II) Initializing built-in extension XC-MISC
[ 25.614] (II) Initializing built-in extension SECURITY
[ 25.614] (II) Initializing built-in extension XINERAMA
[ 25.614] (II) Initializing built-in extension XFIXES
[ 25.614] (II) Initializing built-in extension RENDER
[ 25.614] (II) Initializing built-in extension RANDR
[ 25.614] (II) Initializing built-in extension COMPOSITE
[ 25.614] (II) Initializing built-in extension DAMAGE
[ 25.616] ukiDynamicMajor: found major device number 253
[ 25.616] ukiDynamicMajor: found major device number 253
[ 25.616] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 25.616] ukiOpenDevice: node name is /dev/ati/card0
[ 25.616] ukiOpenDevice: open result is 16, (OK)
[ 25.616] ukiOpenByBusid: ukiOpenMinor returns 16
[ 25.616] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 25.661]
Backtrace:
[ 25.661] 0: /usr/bin/Xorg (xorg_backtrace+0x28) [0x498588]
[ 25.661] 1: /usr/bin/Xorg (0x400000+0x672d9) [0x4672d9]
[ 25.661] 2: /lib/libpthread.so.0 (0x7f2043180000+0xf1c0) [0x7f204318f1c0]
[ 25.661] Segmentation fault at address (nil)
[ 25.661]
Fatal server error:
[ 25.661] Caught signal 11 (Segmentation fault). Server aborting
[ 25.661]
[ 25.661]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 25.661] Please also check the log file at "/var/log/Xorg.1.log" for additional information.
[ 25.661]
[ 25.661] (II) fglrx(0): Backup framebuffer data.
[ 25.661] (EE) fglrx(0): total backup size zero
[ 25.661] (II) fglrx(0): Backup complete.
Any help would be greatly appreciated.skottish wrote:
Welcome to the forums.
Please don't post general issues in this sub-forum. Moving...
Oops, my bad.
As for my issue(s), I'm not going to bother with the proprietary driver until AMD gets their act together. -
FAQ: What features use the GPU and how do I troubleshoot GPU issues?
Photoshop CS6 GPU FAQ
Introduction
This document provides a quick reference guide to video card usage in Photoshop. Some features require a compatible video card to work; if the video card or its driver is defective or unsupported, those features will not work at all. Other features use the video card for acceleration and if the card or driver is defective those features will run more slowly.
Mercury Graphics Engine
The Mercury Graphics Engine (MGE) represents features that use video card, or GPU, acceleration. In Photoshop CS6, this new engine delivers near-instant results when editing with key tools such as Liquify, Warp, Lighting Effects and the Oil Paint filter. The new MGE delivers unprecedented responsiveness for a fluid feel as you work.
MGE is new to Photoshop CS6, and uses both the OpenGL and OpenCL frameworks. It does not use the proprietary CUDA framework from nVidia.
In order to use MGE, you must have a supported video card and updated driver. If you do not have a supported card, performance will be degraded. In most cases the acceleration is lost and the feature runs in the normal CPU mode. However, there are some features that will not work without a supported video card.
GPU features added in Photoshop CS6
Adaptive Wide Angle Filter (compatible video card required)
Liquify (accelerated by compatible video card with 512MB VRAM, GPU mode unavailable on Windows XP)
Oil Paint (compatible video card required)
Warp and Puppet Warp (accelerated by compatible video card, GPU mode unavailable on Windows XP)
Field Blur, Iris Blur, and Tilt/Shift (accelerated by compatible video
card supporting OpenCL, GPU mode unavailable on Windows XP)
Lighting Effects Gallery (compatible video card required with 512MB
VRAM, unavailable on Windows XP)
New 3D enhancements (3D features in Photoshop require a compatible video card with 512MB VRAM, unavailable on Windows XP):
Draggable Shadows
Ground plane reflections
Roughness
On-canvas UI controls
Ground plane
Liqht widgets on edge of canvas
IBL (image based light) controller
* Note that all 3D features are unavailable on Windows XP in Photoshop CS6
GPU features added in previous versions of Photoshop
Scrubby Zoom. See Zoom continuously
Heads Up Display (HUD) color picker. See Choose a color while painting
Color sampling ring. Choose colors with the Eyedropper tool
Brush dynamic resize and hardness control. See Resize or change hardness of cursors by dragging
Bristle Brush tip previews. Bristle tip shape options
Rule of thirds crop grid overlay. Crop images
Zoom enhancements. Smooth display at all zoom levels and temporary zoom. See Zoom continuouslyTemporarily zoom an image
Animated transitions for one-stop zoom.
Flick-panning.
Rotate the canvas. Use the Rotate View tool
View nonsquare pixel images. Adjust pixel aspect ratio
Pixel grid. Hide the pixel grid
Adobe Color Engine (ACE).
Draw Brush tip cursors. Resize or change hardness of cursors by dragging
Adobe Bridge GPU features
Preview panel
Full-screen preview
Review mode
See Preview and compare images in Adobe Bridge CS6 Help for information on all of these features.
GPU/OpenGL preferences in Photoshop CS6
The advantages of using a compatible video card (GPU) with Photoshop are that you can experience better performance and more features. Problems can occur if you have an older video card with limited VRAM or if you use other programs at the same time as Photoshop that use the GPU.
Choose Edit > Preferences (Windows) or Photoshop > Preferences (Mac OS).
In the Performance panel, make sure Use Graphics Processor is selected in GPU Settings.
Click Advanced Settings and specify the following options:
Mode > Basic
Mode > Normal
Mode > Advanced Provides the benefits of Normal mode as well as newer OpenGL advances that can result in improved performance.
Use Graphics Processor to Accelerate Computation
Use OpenCL Uses the GPU to accelerate the new blur filters (Field Blur, Iris Blur, and Tilt-Shift) – OpenCL will only be available on newer GPUs that support OpenCL v1.1 or higher
Anti-Alias Guides And Paths Allows the GPU hardware to smooth the edges of drawn guides and paths.
30 Bit Display (Windows only) Allows Photoshop to display 30 bit data directly to screen on video cards that support it
Quick GPU Troubleshooting Steps
You can experience problems such as artifacts, errors, and crashes if there are incompatibilities between Photoshop and the display components that access the GPU.
If you experience crashes, incorrectly rendered windows or objects, redraw issues, or performance issues while running Photoshop, first determine whether OpenGL is causing the problem.
Turn off OpenGL.
Choose Edit > Preferences (Windows) or Photoshop > Preferences (Mac OS).
In the Performance panel, uncheck Use Graphics Processor. Click OK.
Restart Photoshop, and perform the same function.
If the problem recurs while OpenGL Drawing is disabled, OpenGL is not the cause. For additional troubleshooting, see Troubleshoot system errors and freezes | Adobe software on Windows (cpsid_82252) or Troubleshoot system errors and freezes | Adobe software on Mac OS 10.x (cpsid_82414).
If the problem resolves, proceed with the rest of the troubleshooting steps to fix OpenGL.
Make sure that you're using the latest update of Photoshop.Updates fix bugs and issues.
Update the display driver.Updated display drivers can fix many issues, such as crashing, incorrectly rendered objects, and performance problems. Determine what video card you have and go directly to the manufacturer's website (nVidia or ATI/AMD) and download the latest driver. (Note: Simply doing a Windows Update is does not guarantee you are using the latest driver. You must go directly to the nVideo or ATI/AMD websites to get the absolute latest driver.) After you update your driver, turn on Use Graphics Processor in Photoshop preferences.
Reset preferences.
Resetting preferences returns OpenGL settings to their default status. Reset Photoshop preferences by pressing and holding Shift+Ctrl+Alt (Windows) or Shift+Option+Command (Mac OS) immediately after you start Photoshop.
Click Yes when asked if you want to delete the Adobe Photoshop Settings File.
Retry the function that caused the problem.
Change the OpenGL mode to Basic.
Setting the OpenGL mode to Basic uses the least amount of GPU memory and the most basic GPU feature set.
Close all documents.
Choose Edit > Preferences (Windows) or Photoshop > Preferences (Mac OS)
In the Performance panel, click the GPU Settings Advanced Settings button.
Choose Mode > Basic
Restart Photoshop.
If this solution resolves the problem, switch to Normal mode. See if the issue recurs. If the issue recurs, return to Basic mode.
Note: If you’re changing GPU preferences to troubleshoot a problem, re-launch Photoshop after each change.
If you are using more than one video adapter, remove the additional cards.
Multiple video adapters can cause problems with GPU accelerated or enabled features in Photoshop. It's best to connect two (or more) monitors into one video adapter. If you have to use more than one video adapter, make sure that they are the same make and model. Otherwise, crashes and other problems can occur in Photoshop.
Note: Using two video adapters does not enhance Photoshop's performance.
Check your Cache Levels setting.
If you've set your Cache Levels to 1 in Photoshop preferences, you can experience performance issues with GPU features. Reset Cache Levels to the default setting, which is 4.
Choose Edit > Preferences > Performance (Windows) or Photoshop > Preferences (Mac OS)
In the Performance panel, choose Cache Levels > 4.
The GPU Sniffer
To help guard against Photoshop crashes related to bad GPU hardware or drivers, Photoshop employs a small program called the GPU Sniffer. Every time Photoshop is launched, Photoshop launches the sniffer. The sniffer runs rudimentary tests of the GPU and reports the results to Photoshop. If the sniffer crashes or reports a failure status to Photoshop, Photoshop will not use the GPU. The Use Graphics Hardware checkbox in the Performance panel of the Preferences will be unchecked and disabled.
The first time the sniffer fails, Photoshop will display a dialog indicating that it has detected a problem with the GPU. On subsequent launches the dialog will not appear unless the Photoshop preferences are reset.
If the user corrects the problem, either by replacing the video card or by updating the driver, then the sniffer will pass on the next launch and the Use Graphics Hardware checkbox will be enabled and returned to its previous state (enabled or disabled).
Tested video cards for Photoshop CS6
Adobe tested the following video cards before the release of Photoshop CS6. This document lists the video card by series. While the minimum amount of VRAM supported on video cards for Photoshop CS6 is 256MB, some features require 512MB of VRAM to be enabled.
Note: Adobe tested laptop and desktop versions of the following cards. Be sure to download the latest driver for your specific model. (Laptop and desktop versions have slightly different names.)
nVidia GeForce 8000, 9000, 100, 200, 300, 400, 500 series
nVidia Quadro 400, 600, 2000, 4000 (Mac & Win), CX, 5000, 6000
AMD/ATI Radeon 2000, 3000, 4000, 5000, 6000, 7000 series
AMD/ATI FirePro 3800, 4800, 5800, 7800, 8800, 9800, 3900, 4900, 5900, 7900
Intel Intel HD Graphics, Intel HD Graphics P3000, Intel HD Graphics P4000
Note: ATI X1000 series and nVidia 7000 series cards are no longer being tested and are not officially supported in CS6 – some basic GL functionality may be available for both these cards.
Note: 3Dand some Open GL features are disabled on Windows XP, as stated on : http://labs.adobe.com/technologies/photoshopcs6/I've had several timeout since the pings were started. Got a some response times > 1ms (nothing greater than 7 or 8ms), but no timeouts.
-
Photoshop CC 2014 crashes when I try to use any 3D tools or features?
I am a college student and going to be in a real bind as soon as this next semester starts without this working properly. We just started touching 3D features in Photoshop last semester but now i have advanced Photoshop this next semester and this will seriously kill my grade without this working. I have a toshiba laptop C55DT-A5106 with AMD A6-5200 HD 8400 processor and graphics running Windows 8.1 pro build 9600. Photoshop works fine until i use any 3D features, then i select the tool or feature, it asks me would i like to switch to 3D workspace, I click yes or no(it doesnt matter they both result in the same thing happening) then I get the pop up box saying Photoshop has stopped working and needs to close the program. I have had adobe photoshop support working on trying to fix this for weeks now and they cannot figure it out. They have been on my laptop remotely many times and they cannot figure it out. They say they have to contact the software engineer next. Just figured if someone else has incite on what the problem could be that would be great. I and the support team have exhausted all known usual fixes. I have tried 4 different drivers including two betas drivers. tried 3 different chipset drivers. uninstalled and reinstalled many times, adjusted preferences in photoshop different ways(myself and by adobe support), created an administrator account and tried running in that instead of my normal account, tried running in safe mode, and finally completely reformatted hdd and fresh installed windows again. They all did the same thing no matter what i tried crashed at the same place with the same error in the events. the following are the errors in windows event log.
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-12-29T04:36:42.000000000Z" />
<EventRecordID>976</EventRecordID>
<Channel>Application</Channel>
<Computer>ToshLaptop</Computer>
<Security />
</System>
- <EventData>
<Data>Photoshop.exe</Data>
<Data>15.2.2.310</Data>
<Data>5480338c</Data>
<Data>Photoshop.exe</Data>
<Data>15.2.2.310</Data>
<Data>5480338c</Data>
<Data>c000001d</Data>
<Data>00000000049de322</Data>
<Data>6d4</Data>
<Data>01d02320ca31a1f1</Data>
<Data>C:\Program Files\Adobe\Adobe Photoshop CC 2014\Photoshop.exe</Data>
<Data>C:\Program Files\Adobe\Adobe Photoshop CC 2014\Photoshop.exe</Data>
<Data>49247fbf-8f14-11e4-8250-008cfaa303c2</Data>
<Data />
<Data />
</EventData>
</Event>
and there are always two errors in the logs for this this is the second
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Application Error" />
<EventID Qualifiers="49152">1005</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-12-29T04:36:42.000000000Z" />
<EventRecordID>977</EventRecordID>
<Channel>Application</Channel>
<Computer>ToshLaptop</Computer>
<Security />
</System>
- <EventData>
<Data />
<Data>Adobe Photoshop CC 2014</Data>
<Data>00000000</Data>
<Data>0</Data>
</EventData>
</Event>
here is my system info
OS Name
Microsoft Windows 8.1 Pro
Version
6.3.9600 Build 9600
Other OS Description
Not Available
OS Manufacturer
Microsoft Corporation
System Name
TOSHLAPTOP
System Manufacturer
TOSHIBA
System Model
Satellite C55Dt-A
System Type
x64-based PC
System SKU
PSCFWU
Processor
AMD A6-5200 APU with Radeon(TM) HD Graphics, 2000 Mhz, 4 Core(s), 4 Logical Processor(s)
BIOS Version/Date
Insyde Corp. 1.80, 1/27/2014
SMBIOS Version
2.7
Embedded Controller Version
1.20
BIOS Mode
UEFI
BaseBoard Manufacturer
TOSHIBA
BaseBoard Model
Not Available
BaseBoard Name
Base Board
Platform Role
Mobile
Secure Boot State
On
PCR7 Configuration
Binding Not Possible
Windows Directory
C:\Windows
System Directory
C:\Windows\system32
Boot Device
\Device\HarddiskVolume2
Locale
United States
Hardware Abstraction Layer
Version = "6.3.9600.17196"
User Name
ToshLaptop\TOSHLAPTOP\curtis
Time Zone
Pacific Standard Time
Installed Physical Memory (RAM)
8.00 GB
Total Physical Memory
7.45 GB
Available Physical Memory
5.45 GB
Total Virtual Memory
9.26 GB
Available Virtual Memory
6.83 GB
Page File Space
1.81 GB
Page File
C:\pagefile.sys
Hyper-V - VM Monitor Mode Extensions
Yes
Hyper-V - Second Level Address Translation Extensions
Yes
Hyper-V - Virtualization Enabled in Firmware
Yes
Hyper-V - Data Execution Protection
Yes
here is my photoshop info
Adobe Photoshop Version: 2014.2.2 20141204.r.310 2014/12/04:23:59:59 CL 994532 x64
Operating System: Windows 8.1 64-bit
Version: 6.3
System architecture: AMD CPU Family:15, Model:0, Stepping:1 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, AVX
Physical processor count: 4
Processor speed: 1996 MHz
Built-in memory: 7630 MB
Free memory: 5387 MB
Memory available to Photoshop: 6620 MB
Memory used by Photoshop: 70 %
3D Multitone Printing: Disabled.
Windows 2x UI: Disabled.
Highbeam: Enabled.
Image tile size: 1028K
Image cache levels: 4
Font Preview: Medium
TextComposer: Latin
Display: 1
Display Bounds: top=0, left=0, bottom=768, right=1366
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
NumGLGPUs=1
NumCLGPUs=1
glgpu[0].GLVersion="3.0"
glgpu[0].GLMemoryMB=512
glgpu[0].GLName="AMD Radeon HD 8400"
glgpu[0].GLVendor="ATI Technologies Inc."
glgpu[0].GLVendorID=4098
glgpu[0].GLDriverVersion="13.352.1004.1007"
glgpu[0].GLRectTextureSize=16384
glgpu[0].GLRenderer="AMD Radeon HD 8400"
glgpu[0].GLRendererID=38960
glgpu[0].HasGLNPOTSupport=1
glgpu[0].GLDriver="aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atium d64.dll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm6 4.dll"
glgpu[0].GLDriverDate="20140422000000.000000-000"
glgpu[0].CanCompileProgramGLSL=1
glgpu[0].GLFrameBufferOK=1
glgpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="4.30"
glgpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[2147 483647]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[192]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[32]
glgpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[32]
glgpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[1024]
glgpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[1024]
glgpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[128]
glgpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[29]
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
glgpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
glgpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
glgpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
glgpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=1
clgpu[0].CLPlatformVersion="1.2 AMD-APP (1411.4)"
clgpu[0].CLDeviceVersion="1.2 AMD-APP (1411.4)"
clgpu[0].CLMemoryMB=765
clgpu[0].CLName="Kalindi"
clgpu[0].CLVendor="Advanced Micro Devices, Inc."
clgpu[0].CLVendorID=4098
clgpu[0].CLDriverVersion="1411.4 (VM)"
clgpu[0].CUDASupported=0
clgpu[0].CLBandwidth=8.14963e+009
clgpu[0].CLCompute=71.0287
License Type: Subscription
Serial number: 90970954083047822703
Application folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\
Temporary file path: C:\Users\curtis\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 697.4G, 632.0G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Required\Plug-Ins\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Plug-ins\
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2014/08/12-23:42:09 79.557478 79.557478
adbeape.dll Adobe APE 2013/02/04-09:52:32 0.1160850 0.1160850
AdbePM.dll PatchMatch 2014/09/07-21:07:38 79.558079 79.558079
AdobeLinguistic.dll Adobe Linguisitc Library 8.0.0
AdobeOwl.dll Adobe Owl 5.2.4
AdobePDFL.dll PDFL 2014/08/18-15:13:12 79.512424 79.512424
AdobePIP.dll Adobe Product Improvement Program 7.2.1.3399
AdobeXMP.dll Adobe XMP Core 2014/08/20-09:53:02 79.156797 79.156797
AdobeXMPFiles.dll Adobe XMP Files 2014/08/20-09:53:02 79.156797 79.156797
AdobeXMPScript.dll Adobe XMP Script 2014/08/20-09:53:02 79.156797 79.156797
adobe_caps.dll Adobe CAPS 8,0,0,13
AGM.dll AGM 2014/08/12-23:42:09 79.557478 79.557478
ahclient.dll AdobeHelp Dynamic Link Library 1,8,0,31
amtlib.dll AMTLib (64 Bit) 8.0.0.122212002 BuildVersion: 8.0; BuildDate: Wed Jul 30 2014 15:59:34) 1.000000
ARE.dll ARE 2014/08/12-23:42:09 79.557478 79.557478
AXE8SharedExpat.dll AXE8SharedExpat 2013/12/20-21:40:29 79.551013 79.551013
AXEDOMCore.dll AXEDOMCore 2013/12/20-21:40:29 79.551013 79.551013
Bib.dll BIB 2014/08/12-23:42:09 79.557478 79.557478
BIBUtils.dll BIBUtils 2014/08/12-23:42:09 79.557478 79.557478
boost_date_time.dll photoshopdva 8.0.0
boost_signals.dll photoshopdva 8.0.0
boost_system.dll photoshopdva 8.0.0
boost_threads.dll photoshopdva 8.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.2.6.32411 2.2.6.32411
CITThreading.dll Adobe CITThreading 2.2.6.32411 2.2.6.32411
CoolType.dll CoolType 2014/08/12-23:42:09 79.557478 79.557478
dvaaudiodevice.dll photoshopdva 8.0.0
dvacore.dll photoshopdva 8.0.0
dvamarshal.dll photoshopdva 8.0.0
dvamediatypes.dll photoshopdva 8.0.0
dvametadata.dll photoshopdva 8.0.0
dvametadataapi.dll photoshopdva 8.0.0
dvametadataui.dll photoshopdva 8.0.0
dvaplayer.dll photoshopdva 8.0.0
dvatransport.dll photoshopdva 8.0.0
dvaui.dll photoshopdva 8.0.0
dvaunittesting.dll photoshopdva 8.0.0
dynamiclink.dll photoshopdva 8.0.0
ExtendScript.dll ExtendScript 2014/01/21-23:58:55 79.551519 79.551519
icucnv40.dll International Components for Unicode 2013/02/25-15:59:15 Build gtlib_4.0.19090
icudt40.dll International Components for Unicode 2013/02/25-15:59:15 Build gtlib_4.0.19090
igestep30.dll IGES Reader 9.3.0.113
imslib.dll IMSLib DLL 7.0.0.154
JP2KLib.dll JP2KLib 2014/06/28-00:28:27 79.254012 79.254012
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libiomp5md.dll Intel(R) OpenMP* Runtime Library 5.0
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
LogSession.dll LogSession 7.2.1.3399
mediacoreif.dll photoshopdva 8.0.0
MPS.dll MPS 2014/08/18-23:43:19 79.557676 79.557676
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CC 2014 15.2.2
Plugin.dll Adobe Photoshop CC 2014 15.2.2
PlugPlugExternalObject.dll Adobe(R) CEP PlugPlugExternalObject Standard Dll (64 bit) 5.0.0
PlugPlugOwl.dll Adobe(R) CSXS PlugPlugOwl Standard Dll (64 bit) 5.2.0.54
PSArt.dll Adobe Photoshop CC 2014 15.2.2
PSViews.dll Adobe Photoshop CC 2014 15.2.2
SCCore.dll ScCore 2014/01/21-23:58:55 79.551519 79.551519
ScriptUIFlex.dll ScriptUIFlex 2014/01/20-22:42:05 79.550992 79.550992
svml_dispmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 12.0
tbb.dll Intel(R) Threading Building Blocks for Windows 4, 2, 2013, 1114
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 4, 2, 2013, 1114
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 8.0.0.14 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 8.0.0.14
VulcanControl.dll Vulcan Application Control Library 5.0.0.82
VulcanMessage5.dll Vulcan Message Library 5.0.0.82
WRServices.dll WRServices Fri Mar 07 2014 15:33:10 Build 0.20204 0.20204
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
3D Studio 15.2.2 (2014.2.2 x001 x003)
Accented Edges 15.2.2
Adaptive Wide Angle 15.2.2
Angled Strokes 15.2.2
Average 15.2.2 (2014.2.2 x001 x003)
Bas Relief 15.2.2
BMP 15.2.2
Camera Raw 8.7.1
Camera Raw Filter 8.7.1
Chalk & Charcoal 15.2.2
Charcoal 15.2.2
Chrome 15.2.2
Cineon 15.2.2 (2014.2.2 x001 x003)
Clouds 15.2.2 (2014.2.2 x001 x003)
Collada 15.2.2 (2014.2.2 x001 x003)
Color Halftone 15.2.2
Colored Pencil 15.2.2
CompuServe GIF 15.2.2
Conté Crayon 15.2.2
Craquelure 15.2.2
Crop and Straighten Photos 15.2.2 (2014.2.2 x001 x003)
Crop and Straighten Photos Filter 15.2.2
Crosshatch 15.2.2
Crystallize 15.2.2
Cutout 15.2.2
Dark Strokes 15.2.2
De-Interlace 15.2.2
Dicom 15.2.2
Difference Clouds 15.2.2 (2014.2.2 x001 x003)
Diffuse Glow 15.2.2
Displace 15.2.2
Dry Brush 15.2.2
Eazel Acquire 15.2.2 (2014.2.2 x001 x003)
Embed Watermark 4.0
Entropy 15.2.2 (2014.2.2 x001 x003)
Export Color Lookup Tables NO VERSION
Extrude 15.2.2
FastCore Routines 15.2.2 (2014.2.2 x001 x003)
Fibers 15.2.2
Film Grain 15.2.2
Filter Gallery 15.2.2
Flash 3D 15.2.2 (2014.2.2 x001 x003)
Fresco 15.2.2
Glass 15.2.2
Glowing Edges 15.2.2
Google Earth 4 15.2.2 (2014.2.2 x001 x003)
Grain 15.2.2
Graphic Pen 15.2.2
Halftone Pattern 15.2.2
HDRMergeUI 15.2.2
HSB/HSL 15.2.2
IFF Format 15.2.2
IGES 15.2.2 (2014.2.2 x001 x003)
Ink Outlines 15.2.2
JPEG 2000 15.2.2
Kurtosis 15.2.2 (2014.2.2 x001 x003)
Lens Blur 15.2.2
Lens Correction 15.2.2
Lens Flare 15.2.2
Liquify 15.2.2
Matlab Operation 15.2.2 (2014.2.2 x001 x003)
Maximum 15.2.2 (2014.2.2 x001 x003)
Mean 15.2.2 (2014.2.2 x001 x003)
Measurement Core 15.2.2 (2014.2.2 x001 x003)
Median 15.2.2 (2014.2.2 x001 x003)
Mezzotint 15.2.2
Minimum 15.2.2 (2014.2.2 x001 x003)
MMXCore Routines 15.2.2 (2014.2.2 x001 x003)
Mosaic Tiles 15.2.2
Multiprocessor Support 15.2.2 (2014.2.2 x001 x003)
Neon Glow 15.2.2
Note Paper 15.2.2
NTSC Colors 15.2.2 (2014.2.2 x001 x003)
Ocean Ripple 15.2.2
OpenEXR 15.2.2
Paint Daubs 15.2.2
Palette Knife 15.2.2
Patchwork 15.2.2
Paths to Illustrator 15.2.2
PCX 15.2.2 (2014.2.2 x001 x003)
Photocopy 15.2.2
Photoshop 3D Engine 15.2.2 (2014.2.2 x001 x003)
Photoshop Touch 14.0
Picture Package Filter 15.2.2 (2014.2.2 x001 x003)
Pinch 15.2.2
Pixar 15.2.2 (2014.2.2 x001 x003)
Plaster 15.2.2
Plastic Wrap 15.2.2
PLY 15.2.2 (2014.2.2 x001 x003)
PNG 15.2.2
Pointillize 15.2.2
Polar Coordinates 15.2.2
Portable Bit Map 15.2.2 (2014.2.2 x001 x003)
Poster Edges 15.2.2
PRC 15.2.2 (2014.2.2 x001 x003)
Radial Blur 15.2.2
Radiance 15.2.2 (2014.2.2 x001 x003)
Range 15.2.2 (2014.2.2 x001 x003)
Read Watermark 4.0
Render Color Lookup Grid NO VERSION
Reticulation 15.2.2
Ripple 15.2.2
Rough Pastels 15.2.2
Save for Web 15.2.2
ScriptingSupport 15.2.2
Shake Reduction 15.2.2
Shear 15.2.2
Skewness 15.2.2 (2014.2.2 x001 x003)
Smart Blur 15.2.2
Smudge Stick 15.2.2
Solarize 15.2.2 (2014.2.2 x001 x003)
Spatter 15.2.2
Spherize 15.2.2
Sponge 15.2.2
Sprayed Strokes 15.2.2
Stained Glass 15.2.2
Stamp 15.2.2
Standard Deviation 15.2.2 (2014.2.2 x001 x003)
STL 15.2.2 (2014.2.2 x001 x003)
Sumi-e 15.2.2
Summation 15.2.2 (2014.2.2 x001 x003)
Targa 15.2.2
Texturizer 15.2.2
Tiles 15.2.2
Torn Edges 15.2.2
Twirl 15.2.2
U3D 15.2.2 (2014.2.2 x001 x003)
Underpainting 15.2.2
Vanishing Point 15.2.2
Variance 15.2.2 (2014.2.2 x001 x003)
Virtual Reality Modeling Language | VRML 15.2.2 (2014.2.2 x001 x003)
Water Paper 15.2.2
Watercolor 15.2.2
Wave 15.2.2
Wavefront|OBJ 15.2.2 (2014.2.2 x001 x003)
WIA Support 15.2.2 (2014.2.2 x001 x003)
Wind 15.2.2
Wireless Bitmap 15.2.2 (2014.2.2 x001 x003)
ZigZag 15.2.2
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash: NONE
Installed TWAIN devices: NONE
Let me know if anyone else can figure this out.The faulting module is photoshop. Report below.
Source
Adobe Photoshop CC 2014
Summary
Stopped working
Date
2/2/2015 4:54 PM
Status
Report sent
Description
Faulting Application Path: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Photoshop.exe
Problem signature
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 15.2.2.310
Application Timestamp: 5480338c
Fault Module Name: Photoshop.exe
Fault Module Version: 15.2.2.310
Fault Module Timestamp: 5480338c
Exception Code: c000001d
Exception Offset: 00000000049de322
OS Version: 6.3.9600.2.0.0.768.101
Locale ID: 1033
Additional Information 1: 8db4
Additional Information 2: 8db473619c10c0c8b85ce99afe676ed8
Additional Information 3: f06d
Additional Information 4: f06da704bdd5338df2a8d09bde2244bb
Extra information about the problem
Bucket ID: 1fe6d1d4e5765bd348843b981b8ec4d2 (85990875000) -
Hi,
after messing around a few days with my new arch installation (and probably every other live distro in the last few weeks),
I'm really tired of the problems related with the open source radeon driver.
I read the ATI guide as well as the Xorg guide, but my specific problem isn't mentioned anywhere I searched for it.
It seems that kms isn't working with my graphics card (ATI Radeon HD3870), because none of the distro's and/or kernel versions I tried ever worked when kms was enabled. It simply "displays" a black screen, and nothing ever happens. Now I use kernel 3.2.6-2-ARCH on x86_64.
The biggest problem isn't kms because I kind of got used to it. What bothers me most is that I get a black screen too when using the radeon driver in xorg.
No keyboard response, no ssh possible. Not even Xorg.0.log is populated in this scenario.
I realized that when using the vesa driver, everything is fine (except for pretty slow graphics).
When playing around with the files in
/etc/X11/xorg.conf.d
and disabling dri manually, I also get to see graphics, pretty similar to the vesa driver.
Is anybody out there with similar problems?
Thanks in advance, any help is highly appreciated
Greets
joe
20-video.conf
Section "Device"
Identifier "ATI Radeon HD3870"
Driver "radeon"
Option "AGPMode" "8" #not used when KMS is on
Option "AGPFastWrite" "off" #could cause instabilities enable it at your own risk
Option "SWcursor" "off" #software cursor might be necessary on some rare occasions, hence set off by default
# Option "EnablePageFlip" "on" #supported on all R/RV/RS4xx and older hardware and set off by default
# Option "AccelMethod" "XAA" #valid options are XAA and EXA. EXA is the newest acceleration method and its the default.
# Option "RenderAccel" "on" #enabled by default on all radeon hardware
# Option "ColorTiling" "on" #enabled by default on RV300 and later radeon cards.
Option "EXAVSync" "off" #default is off, otherwise on
# Option "EXAPixmaps" "on" #when on icreases 2D performance, but may also cause artifacts on some old cards
Option "AccelDFS" "on" #default is off, read the radeon manpage for more information
Option "DRI" "off"
# Driver "vesa"
EndSection
dmesg output:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.6-2-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20120120 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Feb 16 10:10:02 CET 2012
[ 0.000000] Command line: root=/dev/sda9 ro radeon.modeset=0 video=1280x1024
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfee0000 (usable)
[ 0.000000] BIOS-e820: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. P35-DS4/P35-DS4, BIOS F14 06/19/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 100000000 mask FE0000000 write-back
[ 0.000000] 3 base 0DFF00000 mask FFFF00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdfee0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f5030] f5030
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dfee0000
[ 0.000000] 0000000000 - 00dfe00000 page 2M
[ 0.000000] 00dfe00000 - 00dfee0000 page 4k
[ 0.000000] kernel direct mapping tables up to dfee0000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[ 0.000000] 0100000000 - 0120000000 page 2M
[ 0.000000] kernel direct mapping tables up to 120000000 @ dfeda000-dfee0000
[ 0.000000] RAMDISK: 37d68000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f6a20 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000dfee3040 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000dfee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000dfee3180 04B2A (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 00000000dfee0000 00040
[ 0.000000] ACPI: HPET 00000000dfee7e00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000dfee7e80 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: APIC 00000000dfee7d00 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT 00000000dfee8520 003AB (v01 PmRef CpuPm 00003000 INTL 20040311)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000120000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000120000000
[ 0.000000] NODE_DATA [000000011fffb000 - 000000011fffffff]
[ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b600000-ffff88011f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000dfee0
[ 0.000000] 0: 0x00100000 -> 0x00120000
[ 0.000000] On node 0 totalpages: 1048173
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3912 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 896800 pages, LIFO batch:31
[ 0.000000] Normal zone: 2048 pages used for memmap
[ 0.000000] Normal zone: 129024 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dfee0000 - 00000000dfee3000
[ 0.000000] PM: Registered nosave memory: 00000000dfee3000 - 00000000dfef0000
[ 0.000000] PM: Registered nosave memory: 00000000dfef0000 - 00000000dff00000
[ 0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:10100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fc00000 s82176 r8192 d24320 u524288
[ 0.000000] pcpu-alloc: s82176 r8192 d24320 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1029736
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda9 ro radeon.modeset=0 video=1280x1024
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4046860k/4718592k available (4488k kernel code, 525900k absent, 145832k reserved, 4409k data, 736k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2333.500 MHz processor.
[ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 4668.45 BogoMIPS (lpj=7778333)
[ 0.003342] pid_max: default: 32768 minimum: 301
[ 0.003369] Security Framework initialized
[ 0.003374] AppArmor: AppArmor disabled by boot time parameter
[ 0.003723] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.005581] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.006743] Mount-cache hash table entries: 256
[ 0.006907] Initializing cgroup subsys cpuacct
[ 0.006913] Initializing cgroup subsys memory
[ 0.006922] Initializing cgroup subsys devices
[ 0.006924] Initializing cgroup subsys freezer
[ 0.006926] Initializing cgroup subsys net_cls
[ 0.006928] Initializing cgroup subsys blkio
[ 0.006963] CPU: Physical Processor ID: 0
[ 0.006964] CPU: Processor Core ID: 0
[ 0.006966] mce: CPU supports 6 MCE banks
[ 0.006974] CPU0: Thermal monitoring enabled (TM2)
[ 0.006979] using mwait in idle threads.
[ 0.008147] ACPI: Core revision 20110623
[ 0.010032] ftrace: allocating 17394 entries in 69 pages
[ 0.013728] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.048079] CPU0: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz stepping 0b
[ 0.049997] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.049997] PEBS disabled due to CPU errata.
[ 0.049997] ... version: 2
[ 0.049997] ... bit width: 40
[ 0.049997] ... generic registers: 2
[ 0.049997] ... value mask: 000000ffffffffff
[ 0.049997] ... max period: 000000007fffffff
[ 0.049997] ... fixed-purpose events: 3
[ 0.049997] ... event mask: 0000000700000003
[ 0.066760] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.093341] Booting Node 0, Processors #1
[ 0.093345] smpboot cpu 1: start_ip = 98000
[ 0.190016] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.196659] Brought up 2 CPUs
[ 0.196662] Total of 2 processors activated (9337.59 BogoMIPS).
[ 0.198466] devtmpfs: initialized
[ 0.200386] PM: Registering ACPI NVS region at dfee0000 (12288 bytes)
[ 0.200743] print_constraints: dummy:
[ 0.200790] NET: Registered protocol family 16
[ 0.200902] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.200905] ACPI: bus type pci registered
[ 0.200969] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.200972] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.212178] PCI: Using configuration type 1 for base access
[ 0.212775] bio: create slab <bio-0> at 0
[ 0.212775] ACPI: Added _OSI(Module Device)
[ 0.212775] ACPI: Added _OSI(Processor Device)
[ 0.212775] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.212775] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.213647] ACPI: EC: Look up EC in DSDT
[ 0.216762] ACPI: SSDT 00000000dfee7f00 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.216943] ACPI: Dynamic OEM Table Load:
[ 0.216946] ACPI: SSDT (null) 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.217044] ACPI: SSDT 00000000dfee83c0 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.217213] ACPI: Dynamic OEM Table Load:
[ 0.217215] ACPI: SSDT (null) 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.217342] ACPI: Interpreter enabled
[ 0.217346] ACPI: (supports S0 S3 S4 S5)
[ 0.217362] ACPI: Using IOAPIC for interrupt routing
[ 0.221381] ACPI: No dock devices found.
[ 0.221383] HEST: Table not found.
[ 0.221387] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.221434] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.221543] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.221546] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.221548] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.221551] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.221553] pci_root PNP0A03:00: host bridge window [mem 0xdff00000-0xfebfffff]
[ 0.221565] pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600
[ 0.221605] pci 0000:00:01.0: [8086:29c1] type 1 class 0x000604
[ 0.221640] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.221644] pci 0000:00:01.0: PME# disabled
[ 0.221678] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[ 0.221716] pci 0000:00:1a.0: reg 20: [io 0xe100-0xe11f]
[ 0.221762] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[ 0.221800] pci 0000:00:1a.1: reg 20: [io 0xe200-0xe21f]
[ 0.221848] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
[ 0.221886] pci 0000:00:1a.2: reg 20: [io 0xe000-0xe01f]
[ 0.221936] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[ 0.221951] pci 0000:00:1a.7: reg 10: [mem 0xf8104000-0xf81043ff]
[ 0.222032] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[ 0.222046] pci 0000:00:1b.0: reg 10: [mem 0xf8100000-0xf8103fff 64bit]
[ 0.222105] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.222109] pci 0000:00:1b.0: PME# disabled
[ 0.222127] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[ 0.222188] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.222192] pci 0000:00:1c.0: PME# disabled
[ 0.222213] pci 0000:00:1c.4: [8086:2948] type 1 class 0x000604
[ 0.222276] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.222279] pci 0000:00:1c.4: PME# disabled
[ 0.222298] pci 0000:00:1c.5: [8086:294a] type 1 class 0x000604
[ 0.222360] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.222363] pci 0000:00:1c.5: PME# disabled
[ 0.222384] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[ 0.222422] pci 0000:00:1d.0: reg 20: [io 0xe300-0xe31f]
[ 0.222468] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[ 0.222505] pci 0000:00:1d.1: reg 20: [io 0xe400-0xe41f]
[ 0.222552] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[ 0.222590] pci 0000:00:1d.2: reg 20: [io 0xe500-0xe51f]
[ 0.222640] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[ 0.222655] pci 0000:00:1d.7: reg 10: [mem 0xf8105000-0xf81053ff]
[ 0.222732] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.222788] pci 0000:00:1f.0: [8086:2916] type 0 class 0x000601
[ 0.222862] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[ 0.222866] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[ 0.222911] pci 0000:00:1f.2: [8086:2922] type 0 class 0x000106
[ 0.222928] pci 0000:00:1f.2: reg 10: [io 0xe600-0xe607]
[ 0.222935] pci 0000:00:1f.2: reg 14: [io 0xe700-0xe703]
[ 0.222942] pci 0000:00:1f.2: reg 18: [io 0xe800-0xe807]
[ 0.222949] pci 0000:00:1f.2: reg 1c: [io 0xe900-0xe903]
[ 0.222957] pci 0000:00:1f.2: reg 20: [io 0xea00-0xea1f]
[ 0.222964] pci 0000:00:1f.2: reg 24: [mem 0xf8106000-0xf81067ff]
[ 0.223004] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.223008] pci 0000:00:1f.2: PME# disabled
[ 0.223023] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[ 0.223036] pci 0000:00:1f.3: reg 10: [mem 0xf8107000-0xf81070ff 64bit]
[ 0.223055] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.223108] pci 0000:01:00.0: [1002:9501] type 0 class 0x000300
[ 0.223121] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.223131] pci 0000:01:00.0: reg 18: [mem 0xf5000000-0xf500ffff 64bit]
[ 0.223138] pci 0000:01:00.0: reg 20: [io 0xb000-0xb0ff]
[ 0.223150] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.223178] pci 0000:01:00.0: supports D1 D2
[ 0.223196] pci 0000:01:00.1: [1002:aa18] type 0 class 0x000403
[ 0.223208] pci 0000:01:00.1: reg 10: [mem 0xf5010000-0xf5013fff 64bit]
[ 0.223261] pci 0000:01:00.1: supports D1 D2
[ 0.223289] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.223292] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.223295] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf5ffffff]
[ 0.223299] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.223343] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.223347] pci 0000:00:1c.0: bridge window [io 0xa000-0xafff]
[ 0.223404] pci 0000:03:00.0: [197b:2363] type 0 class 0x000101
[ 0.223487] pci 0000:03:00.0: reg 24: [mem 0xf8000000-0xf8001fff]
[ 0.223547] pci 0000:03:00.0: PME# supported from D3hot
[ 0.223552] pci 0000:03:00.0: PME# disabled
[ 0.223580] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101
[ 0.223602] pci 0000:03:00.1: reg 10: [io 0xc000-0xc007]
[ 0.223616] pci 0000:03:00.1: reg 14: [io 0xc100-0xc103]
[ 0.223629] pci 0000:03:00.1: reg 18: [io 0xc200-0xc207]
[ 0.223642] pci 0000:03:00.1: reg 1c: [io 0xc300-0xc303]
[ 0.223655] pci 0000:03:00.1: reg 20: [io 0xc400-0xc40f]
[ 0.223733] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.223746] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.223750] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 0.223753] pci 0000:00:1c.4: bridge window [mem 0xf8000000-0xf80fffff]
[ 0.223813] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
[ 0.223831] pci 0000:04:00.0: reg 10: [io 0xd000-0xd0ff]
[ 0.223860] pci 0000:04:00.0: reg 18: [mem 0xf7000000-0xf7000fff 64bit]
[ 0.223895] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.223970] pci 0000:04:00.0: supports D1 D2
[ 0.223972] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.223978] pci 0000:04:00.0: PME# disabled
[ 0.223999] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.224008] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 0.224012] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.224015] pci 0000:00:1c.5: bridge window [mem 0xf6000000-0xf7ffffff]
[ 0.224072] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.224076] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff]
[ 0.224083] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.224085] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.224088] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.224090] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.224093] pci 0000:00:1e.0: bridge window [mem 0xdff00000-0xfebfffff] (subtractive decode)
[ 0.224112] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.224186] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.224217] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.224253] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[ 0.224279] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.224356] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.224359] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.224361] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.232086] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
[ 0.232131] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.232172] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.232212] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.232252] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.232293] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.232333] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 0.232373] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
[ 0.232459] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.232459] vgaarb: loaded
[ 0.232459] vgaarb: bridge control possible 0000:01:00.0
[ 0.232459] PCI: Using ACPI for IRQ routing
[ 0.233794] PCI: pci_cache_line_size set to 64 bytes
[ 0.233868] reserve RAM buffer: 000000000009dc00 - 000000000009ffff
[ 0.233871] reserve RAM buffer: 00000000dfee0000 - 00000000dfffffff
[ 0.233976] NetLabel: Initializing
[ 0.233978] NetLabel: domain hash size = 128
[ 0.233980] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.233992] NetLabel: unlabeled traffic allowed by default
[ 0.234004] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.234008] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.234013] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.243422] Switching to clocksource hpet
[ 0.249909] pnp: PnP ACPI init
[ 0.249926] ACPI: bus type pnp registered
[ 0.250024] pnp 00:00: [bus 00-3f]
[ 0.250026] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.250029] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.250031] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.250033] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.250035] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.250037] pnp 00:00: [mem 0xdff00000-0xfebfffff window]
[ 0.250100] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.250165] pnp 00:01: [io 0x0010-0x001f]
[ 0.250167] pnp 00:01: [io 0x0022-0x003f]
[ 0.250169] pnp 00:01: [io 0x0044-0x005f]
[ 0.250171] pnp 00:01: [io 0x0062-0x0063]
[ 0.250173] pnp 00:01: [io 0x0065-0x006f]
[ 0.250174] pnp 00:01: [io 0x0074-0x007f]
[ 0.250176] pnp 00:01: [io 0x0091-0x0093]
[ 0.250178] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.250179] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.250181] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.250183] pnp 00:01: [io 0x0290-0x029f]
[ 0.250184] pnp 00:01: [io 0x0800-0x087f]
[ 0.250186] pnp 00:01: [io 0x0290-0x0294]
[ 0.250188] pnp 00:01: [io 0x0880-0x088f]
[ 0.250255] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.250258] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.250260] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.250263] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.250265] system 00:01: [io 0x0880-0x088f] has been reserved
[ 0.250268] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.250279] pnp 00:02: [dma 4]
[ 0.250281] pnp 00:02: [io 0x0000-0x000f]
[ 0.250283] pnp 00:02: [io 0x0080-0x0090]
[ 0.250285] pnp 00:02: [io 0x0094-0x009f]
[ 0.250287] pnp 00:02: [io 0x00c0-0x00df]
[ 0.250321] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.250365] pnp 00:03: [irq 0 disabled]
[ 0.250376] pnp 00:03: [irq 8]
[ 0.250378] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.250411] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.250434] pnp 00:04: [io 0x0070-0x0073]
[ 0.250467] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.250475] pnp 00:05: [io 0x0061]
[ 0.250505] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.250516] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.250521] pnp 00:06: [irq 13]
[ 0.250554] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.250652] pnp 00:07: [io 0x03f0-0x03f5]
[ 0.250654] pnp 00:07: [io 0x03f7]
[ 0.250659] pnp 00:07: [irq 6]
[ 0.250661] pnp 00:07: [dma 2]
[ 0.250707] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.250839] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.250844] pnp 00:08: [irq 4]
[ 0.250906] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.251051] pnp 00:09: [io 0x0378-0x037f]
[ 0.251057] pnp 00:09: [irq 7]
[ 0.251106] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.251179] pnp 00:0a: [io 0x0060]
[ 0.251181] pnp 00:0a: [io 0x0064]
[ 0.251186] pnp 00:0a: [irq 1]
[ 0.251221] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.251248] pnp 00:0b: [io 0x0400-0x04bf]
[ 0.251299] system 00:0b: [io 0x0400-0x04bf] has been reserved
[ 0.251302] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.251455] pnp 00:0c: [mem 0xf0000000-0xf3ffffff]
[ 0.251513] system 00:0c: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.251517] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.251644] pnp 00:0d: [mem 0x000d2a00-0x000d3fff]
[ 0.251646] pnp 00:0d: [mem 0x000f0000-0x000f7fff]
[ 0.251648] pnp 00:0d: [mem 0x000f8000-0x000fbfff]
[ 0.251649] pnp 00:0d: [mem 0x000fc000-0x000fffff]
[ 0.251651] pnp 00:0d: [mem 0xdfee0000-0xdfefffff]
[ 0.251653] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[ 0.251655] pnp 00:0d: [mem 0x00100000-0xdfedffff]
[ 0.251657] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
[ 0.251659] pnp 00:0d: [mem 0xfed10000-0xfed1dfff]
[ 0.251663] pnp 00:0d: [mem 0xfed20000-0xfed8ffff]
[ 0.251665] pnp 00:0d: [mem 0xfee00000-0xfee00fff]
[ 0.251667] pnp 00:0d: [mem 0xffb00000-0xffb7ffff]
[ 0.251669] pnp 00:0d: [mem 0xfff00000-0xffffffff]
[ 0.251671] pnp 00:0d: [mem 0x000e0000-0x000effff]
[ 0.251735] system 00:0d: [mem 0x000d2a00-0x000d3fff] has been reserved
[ 0.251738] system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.251741] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.251743] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.251746] system 00:0d: [mem 0xdfee0000-0xdfefffff] could not be reserved
[ 0.251749] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.251751] system 00:0d: [mem 0x00100000-0xdfedffff] could not be reserved
[ 0.251754] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.251756] system 00:0d: [mem 0xfed10000-0xfed1dfff] has been reserved
[ 0.251759] system 00:0d: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.251761] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.251764] system 00:0d: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.251766] system 00:0d: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.251769] system 00:0d: [mem 0x000e0000-0x000effff] has been reserved
[ 0.251772] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.251789] pnp 00:0e: [mem 0xffb80000-0xffbfffff]
[ 0.251833] pnp 00:0e: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.251839] pnp: PnP ACPI: found 15 devices
[ 0.251840] ACPI: ACPI bus type pnp unregistered
[ 0.258732] PCI: max bus depth: 1 pci_try_num: 2
[ 0.258768] pci 0000:00:1c.5: BAR 15: assigned [mem 0xdff00000-0xdfffffff pref]
[ 0.258772] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf8200000-0xf84fffff pref]
[ 0.258777] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf8500000-0xf86fffff 64bit pref]
[ 0.258781] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf8700000-0xf88fffff]
[ 0.258785] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8900000-0xf8afffff 64bit pref]
[ 0.258789] pci 0000:01:00.0: BAR 6: assigned [mem 0xf4000000-0xf401ffff pref]
[ 0.258792] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.258794] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.258798] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf5ffffff]
[ 0.258801] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.258805] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.258807] pci 0000:00:1c.0: bridge window [io 0xa000-0xafff]
[ 0.258812] pci 0000:00:1c.0: bridge window [mem 0xf8700000-0xf88fffff]
[ 0.258815] pci 0000:00:1c.0: bridge window [mem 0xf8900000-0xf8afffff 64bit pref]
[ 0.258821] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.258824] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 0.258828] pci 0000:00:1c.4: bridge window [mem 0xf8000000-0xf80fffff]
[ 0.258832] pci 0000:00:1c.4: bridge window [mem 0xf8500000-0xf86fffff 64bit pref]
[ 0.258838] pci 0000:04:00.0: BAR 6: assigned [mem 0xf8200000-0xf820ffff pref]
[ 0.258840] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 0.258843] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]
[ 0.258847] pci 0000:00:1c.5: bridge window [mem 0xf6000000-0xf7ffffff]
[ 0.258851] pci 0000:00:1c.5: bridge window [mem 0xf8200000-0xf84fffff pref]
[ 0.258856] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.258859] pci 0000:00:1e.0: bridge window [io 0x9000-0x9fff]
[ 0.258877] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.258881] pci 0000:00:01.0: setting latency timer to 64
[ 0.258887] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.258890] pci 0000:00:1c.0: setting latency timer to 64
[ 0.258896] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.258900] pci 0000:00:1c.4: setting latency timer to 64
[ 0.258908] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.258912] pci 0000:00:1c.5: setting latency timer to 64
[ 0.258917] pci 0000:00:1e.0: setting latency timer to 64
[ 0.258921] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.258923] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.258925] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.258928] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.258930] pci_bus 0000:00: resource 8 [mem 0xdff00000-0xfebfffff]
[ 0.258932] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.258934] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf5ffffff]
[ 0.258937] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.258939] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
[ 0.258941] pci_bus 0000:02: resource 1 [mem 0xf8700000-0xf88fffff]
[ 0.258943] pci_bus 0000:02: resource 2 [mem 0xf8900000-0xf8afffff 64bit pref]
[ 0.258945] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.258947] pci_bus 0000:03: resource 1 [mem 0xf8000000-0xf80fffff]
[ 0.258950] pci_bus 0000:03: resource 2 [mem 0xf8500000-0xf86fffff 64bit pref]
[ 0.258952] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.258954] pci_bus 0000:04: resource 1 [mem 0xf6000000-0xf7ffffff]
[ 0.258956] pci_bus 0000:04: resource 2 [mem 0xf8200000-0xf84fffff pref]
[ 0.258958] pci_bus 0000:05: resource 0 [io 0x9000-0x9fff]
[ 0.258961] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.258963] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.258965] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.258967] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.258969] pci_bus 0000:05: resource 8 [mem 0xdff00000-0xfebfffff]
[ 0.259005] NET: Registered protocol family 2
[ 0.259137] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.260130] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.263890] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.264389] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.264391] TCP reno registered
[ 0.264400] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.264438] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.264577] NET: Registered protocol family 1
[ 0.264739] pci 0000:01:00.0: Boot video device
[ 0.264751] PCI: CLS 32 bytes, default 64
[ 0.264806] Unpacking initramfs...
[ 0.302179] Freeing initrd memory: 2592k freed
[ 0.302879] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.302883] Placing 64MB software IO TLB between ffff8800dbeda000 - ffff8800dfeda000
[ 0.302885] software IO TLB at phys 0xdbeda000 - 0xdfeda000
[ 0.303306] audit: initializing netlink socket (disabled)
[ 0.303320] type=2000 audit(1329768309.299:1): initialized
[ 0.315130] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.338613] VFS: Disk quotas dquot_6.5.2
[ 0.338676] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.338772] msgmni has been set to 7909
[ 0.338940] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.338964] io scheduler noop registered
[ 0.338966] io scheduler deadline registered
[ 0.339000] io scheduler cfq registered (default)
[ 0.339111] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.339140] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.339187] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.339219] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.339274] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.339307] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[ 0.339360] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.339392] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 0.339554] intel_idle: MWAIT substates: 0x220
[ 0.339556] intel_idle: does not run on family 6 model 15
[ 0.339588] ERST: Table is not found!
[ 0.339589] GHES: HEST is not enabled!
[ 0.339655] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.360148] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.490595] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.523556] Linux agpgart interface v0.103
[ 0.523632] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.523634] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.523753] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.523858] mousedev: PS/2 mouse device common for all mice
[ 0.523920] rtc_cmos 00:04: RTC can wake from S4
[ 0.524016] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.524040] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.524049] cpuidle: using governor ladder
[ 0.524051] cpuidle: using governor menu
[ 0.524260] TCP cubic registered
[ 0.524381] NET: Registered protocol family 10
[ 0.524806] NET: Registered protocol family 17
[ 0.524810] Registering the dns_resolver key type
[ 0.524938] PM: Hibernation image not present or could not be loaded.
[ 0.524943] registered taskstats version 1
[ 0.536057] rtc_cmos 00:04: setting system clock to 2012-02-20 20:05:09 UTC (1329768309)
[ 0.536101] Initializing network drop monitor service
[ 0.537405] Freeing unused kernel memory: 736k freed
[ 0.537530] Write protecting the kernel read-only data: 8192k
[ 0.542868] Freeing unused kernel memory: 1636k freed
[ 0.545368] Freeing unused kernel memory: 660k freed
[ 0.552316] udevd[37]: starting version 181
[ 0.562725] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.586477] usbcore: registered new interface driver usbfs
[ 0.586503] usbcore: registered new interface driver hub
[ 0.586559] usbcore: registered new device driver usb
[ 0.589654] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.589690] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.589716] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.589719] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.589752] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.592343] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.593681] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.593700] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8104000
[ 0.597428] SCSI subsystem initialized
[ 0.605223] libata version 3.00 loaded.
[ 0.606703] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.606886] hub 1-0:1.0: USB hub found
[ 0.606891] hub 1-0:1.0: 6 ports detected
[ 0.606992] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.607019] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.607023] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.607032] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.610951] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.610968] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8105000
[ 0.617006] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001)
[ 0.617013] pata_acpi 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.617040] pata_acpi 0000:03:00.1: setting latency timer to 64
[ 0.617052] pata_acpi 0000:03:00.1: PCI INT B disabled
[ 0.617278] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.617298] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 0.617744] scsi0 : pata_jmicron
[ 0.617828] scsi1 : pata_jmicron
[ 0.618265] ata1: PATA max UDMA/100 cmd 0xc000 ctl 0xc100 bmdma 0xc400 irq 17
[ 0.618268] ata2: PATA max UDMA/100 cmd 0xc200 ctl 0xc300 bmdma 0xc408 irq 17
[ 0.623351] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.623510] hub 2-0:1.0: USB hub found
[ 0.623514] hub 2-0:1.0: 6 ports detected
[ 0.624287] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.624294] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.624297] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.624313] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.624345] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e100
[ 0.624476] hub 3-0:1.0: USB hub found
[ 0.624480] hub 3-0:1.0: 2 ports detected
[ 0.624556] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.624562] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.624565] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.624572] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.624599] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e200
[ 0.624720] hub 4-0:1.0: USB hub found
[ 0.624724] hub 4-0:1.0: 2 ports detected
[ 0.624794] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.624799] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.624802] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.624811] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.624831] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e000
[ 0.624951] hub 5-0:1.0: USB hub found
[ 0.624955] hub 5-0:1.0: 2 ports detected
[ 0.625023] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.625028] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.625031] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.625038] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.625059] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e300
[ 0.625179] hub 6-0:1.0: USB hub found
[ 0.625183] hub 6-0:1.0: 2 ports detected
[ 0.625254] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.625259] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.625262] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.625269] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.625297] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
[ 0.625418] hub 7-0:1.0: USB hub found
[ 0.625421] hub 7-0:1.0: 2 ports detected
[ 0.625490] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.625495] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.625498] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.625506] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.625527] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e500
[ 0.625645] hub 8-0:1.0: USB hub found
[ 0.625649] hub 8-0:1.0: 2 ports detected
[ 0.625725] ahci 0000:00:1f.2: version 3.0
[ 0.625733] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.625778] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 0.625816] ahci: SSS flag set, parallel bus scan disabled
[ 0.625848] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.625852] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems
[ 0.625856] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.657359] scsi2 : ahci
[ 0.657437] scsi3 : ahci
[ 0.657507] scsi4 : ahci
[ 0.657578] scsi5 : ahci
[ 0.657650] scsi6 : ahci
[ 0.657718] scsi7 : ahci
[ 0.657853] ata3: SATA max UDMA/133 abar m2048@0xf8106000 port 0xf8106100 irq 44
[ 0.657857] ata4: SATA max UDMA/133 abar m2048@0xf8106000 port 0xf8106180 irq 44
[ 0.657859] ata5: SATA max UDMA/133 abar m2048@0xf8106000 port 0xf8106200 irq 44
[ 0.657862] ata6: SATA max UDMA/133 abar m2048@0xf8106000 port 0xf8106280 irq 44
[ 0.657865] ata7: SATA max UDMA/133 abar m2048@0xf8106000 port 0xf8106300 irq 44
[ 0.657867] ata8: SATA max UDMA/133 abar m2048@0xf8106000 port 0xf8106380 irq 44
[ 0.657896] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.670048] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.670053] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 0.670059] ahci 0000:03:00.0: setting latency timer to 64
[ 0.670494] scsi8 : ahci
[ 0.670788] scsi9 : ahci
[ 0.670874] ata9: SATA max UDMA/133 abar m8192@0xf8000000 port 0xf8000100 irq 16
[ 0.670878] ata10: SATA max UDMA/133 abar m8192@0xf8000000 port 0xf8000180 irq 16
[ 0.966690] usb 2-3: new high-speed USB device number 2 using ehci_hcd
[ 0.983370] ata10: SATA link down (SStatus 0 SControl 300)
[ 0.990049] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.140041] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.151383] ata3.00: ATA-8: WDC WD3200AAKS-00VYA0, 12.01B02, max UDMA/133
[ 1.151387] ata3.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.152173] ata3.00: configured for UDMA/133
[ 1.152297] scsi 2:0:0:0: Direct-Access ATA WDC WD3200AAKS-0 12.0 PQ: 0 ANSI: 5
[ 1.303358] Refined TSC clocksource calibration: 2333.333 MHz.
[ 1.303363] Switching to clocksource tsc
[ 1.423352] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[ 1.636760] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.638730] ata4.00: ATAPI: PIONEER DVD-RW DVR-216D, 1.09, max UDMA/66
[ 1.640744] ata4.00: configured for UDMA/66 (SET_XFERMODE skipped)
[ 1.652637] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input1
[ 1.652719] generic-usb 0003:046D:C518.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1/input0
[ 1.682469] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input2
[ 1.682581] generic-usb 0003:046D:C518.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1/input1
[ 1.682660] usbcore: registered new interface driver usbhid
[ 1.682662] usbhid: USB HID core driver
[ 1.703319] scsi 3:0:0:0: CD-ROM PIONEER DVD-RW DVR-216D 1.09 PQ: 0 ANSI: 5
[ 1.833356] usb 8-2: new full-speed USB device number 2 using uhci_hcd
[ 2.190031] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.190225] ata5.00: ATAPI: PLEXTOR DVDR PX-880SA, 1.12, max UDMA/100
[ 2.190887] ata5.00: configured for UDMA/100
[ 2.192517] scsi 4:0:0:0: CD-ROM PLEXTOR DVDR PX-880SA 1.12 PQ: 0 ANSI: 5
[ 2.676695] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.676900] ata6.00: ATAPI: ATAPI iHAS524 A, BL2J, max UDMA/100
[ 2.677593] ata6.00: configured for UDMA/100
[ 2.679182] scsi 5:0:0:0: CD-ROM ATAPI iHAS524 A BL2J PQ: 0 ANSI: 5
[ 2.996691] ata7: SATA link down (SStatus 0 SControl 300)
[ 3.316691] ata8: SATA link down (SStatus 0 SControl 300)
[ 3.323729] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 3.323777] sd 2:0:0:0: [sda] Write Protect is off
[ 3.323780] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.323800] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.386721] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 >
[ 3.387247] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.556655] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 3.556658] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.556876] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 3.560147] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.560302] sr 4:0:0:0: Attached scsi CD-ROM sr1
[ 3.563594] sr2: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.564247] sr 5:0:0:0: Attached scsi CD-ROM sr2
[ 4.070817] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 5.358476] udevd[175]: starting version 181
[ 5.474506] lp: driver loaded but no devices found
[ 5.475629] IT8718 SuperIO detected.
[ 5.475878] parport_pc 00:09: reported by Plug and Play ACPI
[ 5.475918] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 5.477334] parport0: Printer, Brother HL-1030 series
[ 5.477416] lp0: using parport0 (interrupt-driven).
[ 5.517688] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 5.517695] ACPI: Power Button [PWRB]
[ 5.517765] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 5.517769] ACPI: Power Button [PWRF]
[ 5.551233] WARNING! power/level is deprecated; use power/control instead
[ 5.564973] Floppy drive(s): fd0 is 1.44M
[ 5.571097] ppdev: user-space parallel port driver
[ 5.580334] FDC 0 is a post-1991 82077
[ 5.595497] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 5.606414] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.643249] Bluetooth: Core ver 2.16
[ 5.643265] NET: Registered protocol family 31
[ 5.643267] Bluetooth: HCI device and connection manager initialized
[ 5.643270] Bluetooth: HCI socket layer initialized
[ 5.643271] Bluetooth: L2CAP socket layer initialized
[ 5.643277] Bluetooth: SCO socket layer initialized
[ 5.644168] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 5.644419] usbcore: registered new interface driver btusb
[ 5.652026] iTCO_vendor_support: vendor-support=0
[ 5.709504] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 5.709631] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 5.727686] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 5.727705] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 5.727734] r8169 0000:04:00.0: setting latency timer to 64
[ 5.727800] r8169 0000:04:00.0: irq 45 for MSI/MSI-X
[ 5.728211] r8169 0000:04:00.0: eth0: RTL8168b/8111b at 0xffffc90000640000, 00:1a:4d:50:f7:57, XID 18000000 IRQ 45
[ 5.728214] r8169 0000:04:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 5.747940] [drm] Initialized drm 1.1.0 20060810
[ 5.777332] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.777338] pci 0000:01:00.0: setting latency timer to 64
[ 5.777490] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.777492] [drm] No driver support for vblank timestamp query.
[ 5.777495] [drm] Initialized radeon 1.33.0 20080528 for 0000:01:00.0 on minor 0
[ 5.851806] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 5.851809] hda_intel: position_fix set to 1 for device 1458:a022
[ 5.851863] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 5.851886] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 6.013524] hda_codec: ALC889A: BIOS auto-probing.
[ 6.029368] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 6.030255] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 6.030332] snd_hda_intel 0000:01:00.1: irq 47 for MSI/MSI-X
[ 6.030369] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 6.088913] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 6.089067] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
[ 7.446383] EXT4-fs (sda9): re-mounted. Opts: (null)
[ 7.545273] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 7.566720] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 7.701158] Adding 7823616k swap on /dev/sda7. Priority:-1 extents:1 across:7823616k
[ 9.038265] r8169 0000:04:00.0: eth0: link down
[ 9.038272] r8169 0000:04:00.0: eth0: link down
[ 9.038715] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.413267] r8169 0000:04:00.0: eth0: link up
[ 11.413793] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.706297] FS-Cache: Loaded
[ 19.723537] RPC: Registered named UNIX socket transport module.
[ 19.723540] RPC: Registered udp transport module.
[ 19.723542] RPC: Registered tcp transport module.
[ 19.723543] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 19.751238] FS-Cache: Netfs 'nfs' registered for caching
[ 21.883339] eth0: no IPv6 routers present
[ 34.718456] EXT4-fs (sda9): re-mounted. Opts: commit=0
[ 35.061809] EXT4-fs (sda6): re-mounted. Opts: commit=0
[ 35.717036] EXT4-fs (sda5): re-mounted. Opts: commit=0
[ 54.909473] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
Xorg.0.log ("working one" with dri disabled):
[ 20.695]
X.Org X Server 1.11.4
Release Date: 2012-01-27
[ 20.713] X Protocol Version 11, Revision 0
[ 20.713] Build Operating System: Linux 3.2.2-1-ARCH x86_64
[ 20.713] Current Operating System: Linux noejoe-Desktop 3.2.6-2-ARCH #1 SMP PREEMPT Thu Feb 16 10:10:02 CET 2012 x86_64
[ 20.713] Kernel command line: root=/dev/sda9 ro radeon.modeset=0 video=1280x1024
[ 20.713] Build Date: 29 January 2012 03:38:00PM
[ 20.713]
[ 20.713] Current version of pixman: 0.24.4
[ 20.713] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 20.713] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 20.713] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 20 20:05:29 2012
[ 20.755] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 20.772] (==) No Layout section. Using the first Screen section.
[ 20.772] (==) No screen section available. Using defaults.
[ 20.772] (**) |-->Screen "Default Screen Section" (0)
[ 20.772] (**) | |-->Monitor "<default monitor>"
[ 20.773] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 20.773] (**) | |-->Device "ATI Radeon HD3870"
[ 20.773] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 20.773] (==) Automatically adding devices
[ 20.773] (==) Automatically enabling devices
[ 20.808] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 20.808] Entry deleted from font path.
[ 20.808] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 20.808] Entry deleted from font path.
[ 20.808] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 20.808] Entry deleted from font path.
[ 20.808] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 20.808] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 20.808] Entry deleted from font path.
[ 20.808] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 20.808] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 20.808] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 20.808] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 20.808] (II) Loader magic: 0x7ccae0
[ 20.808] (II) Module ABI versions:
[ 20.808] X.Org ANSI C Emulation: 0.4
[ 20.808] X.Org Video Driver: 11.0
[ 20.808] X.Org XInput driver : 13.0
[ 20.808] X.Org Server Extension : 6.0
[ 20.809] (--) PCI:*(0:1:0:0) 1002:9501:1787:2003 rev 0, Mem @ 0xe0000000/268435456, 0xf5000000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
[ 20.809] (II) Open ACPI successful (/var/run/acpid.socket)
[ 20.809] (II) LoadModule: "extmod"
[ 20.840] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 20.851] (II) Module extmod: vendor="X.Org Foundation"
[ 20.851] compiled for 1.11.4, module version = 1.0.0
[ 20.851] Module class: X.Org Server Extension
[ 20.851] ABI class: X.Org Server Extension, version 6.0
[ 20.851] (II) Loading extension MIT-SCREEN-SAVER
[ 20.851] (II) Loading extension XFree86-VidModeExtension
[ 20.851] (II) Loading extension XFree86-DGA
[ 20.851] (II) Loading extension DPMS
[ 20.851] (II) Loading extension XVideo
[ 20.851] (II) Loading extension XVideo-MotionCompensation
[ 20.851] (II) Loading extension X-Resource
[ 20.851] (II) LoadModule: "dbe"
[ 20.852] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 20.852] (II) Module dbe: vendor="X.Org Foundation"
[ 20.852] compiled for 1.11.4, module version = 1.0.0
[ 20.852] Module class: X.Org Server Extension
[ 20.852] ABI class: X.Org Server Extension, version 6.0
[ 20.852] (II) Loading extension DOUBLE-BUFFER
[ 20.852] (II) LoadModule: "glx"
[ 20.852] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 20.867] (II) Module glx: vendor="X.Org Foundation"
[ 20.867] compiled for 1.11.4, module version = 1.0.0
[ 20.867] ABI class: X.Org Server Extension, version 6.0
[ 20.867] (==) AIGLX enabled
[ 20.867] (II) Loading extension GLX
[ 20.867] (II) LoadModule: "record"
[ 20.867] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 20.868] (II) Module record: vendor="X.Org Foundation"
[ 20.868] compiled for 1.11.4, module version = 1.13.0
[ 20.868] Module class: X.Org Server Extension
[ 20.868] ABI class: X.Org Server Extension, version 6.0
[ 20.868] (II) Loading extension RECORD
[ 20.868] (II) LoadModule: "dri"
[ 20.868] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 20.879] (II) Module dri: vendor="X.Org Foundation"
[ 20.879] compiled for 1.11.4, module version = 1.0.0
[ 20.879] ABI class: X.Org Server Extension, version 6.0
[ 20.879] (II) Loading extension XFree86-DRI
[ 20.879] (II) LoadModule: "dri2"
[ 20.880] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 20.880] (II) Module dri2: vendor="X.Org Foundation"
[ 20.880] compiled for 1.11.4, module version = 1.2.0
[ 20.880] ABI class: X.Org Server Extension, version 6.0
[ 20.880] (II) Loading extension DRI2
[ 20.880] (II) LoadModule: "radeon"
[ 20.881] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 20.917] (II) Module radeon: vendor="X.Org Foundation"
[ 20.917] compiled for 1.11.1.902, module version = 6.14.3
[ 20.917] Module class: X.Org Video Driver
[ 20.917] ABI class: X.Org Video Driver, version 11.0
[ 20.918] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV50Thanks for the responses, but catalyst/fglrx never was an option for me.
Today I changed my graphics card, still had an ATI HD2600XT lying around here.
Now everything works perfectly, must have been some hardware fault with the other card, although it worked as it should in Windows 7.
Right now quite happy with kms and gallium -
Satellite A350-13B - OpenGL and Radeon HD3650
Hi
My laptop is Satellite A350-13B with ATI Mobility Radeon HD3650.
I found that I have OpenGL 1.1 (7/7) and partially 1.2 (1/8).
I installed latest drivers from ATI site, modded with Mobility Modder (also tried drivers from Toshiba's site - without results).
I found that modded drivers require OpenGL patch to have it working.
You have to add:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\OpenGLDrivers\ati2dvag
"Version"="2" %REG_DWORD%
"DriverVersion"="1" %REG_DWORD%
"Flags"="1" %REG_DWORD%
"Dll"="atioglxx.dll" %REG_SZ%
But after it OpenGL Extensions Viewer see the same values (1.1 and partially 1.2).
How is it possible to check highest OpenGl version available and make it working?
I have a file called atioglxx.dll in Windows\System32 and registry entries specified above, but OpenGL Extensions Viewer says:
Renderer: GDI Generic
Vendor: Microsoft Corporation
Memory: 512 MB
Version: 1.1.0
Shading language version: N/A
Max texture size: 1024 x 1024
Max texture coordinates: 0
Max vertex texture image units: 0
Max texture image units: 0
Max geometry texture units: 0
Max anisotropic filtering value: 0
Max number of light sources: 8
Max viewport size: 16384 x 16384
Max uniform vertex components: 0
Max uniform fragment components: 0
Max geometry uniform components: 0
Max varying floats: 0
Max samples: 0
Max draw buffers: 0
Extensions: 3
GL_EXT_bgra
GL_EXT_paletted_texture
GL_WIN_swap_hint
Core features
v1.1 (100 % - 7/7)
v1.2 (12 % - 1/8)
v1.3 (0 % - 0/9)
v1.4 (0 % - 0/15)
v1.5 (0 % - 0/3)
v2.0 (0 % - 0/10)
v2.1 (0 % - 0/3)
v3.0 (0 % - 0/23)
v3.1 (0 % - 0/8)
v3.2 (0 % - 0/9)
v3.3 (0 % - 0/9)
v4.0 (0 % - 0/13)
v4.1 (0 % - 0/8)
OpenGL driver version check (Current: 1.1.0, Latest known: 1.1.0):
Latest version of display drivers found
According the database, you are running the latest display drivers for your video card.
No ICD registry entry
The current OpenGL driver doesn't expose the SOFTWARE/Microsoft/Windows (NT)/CurrentVersion/OpenGLDrivers registry entry. Unable to detect the driver version, driver revision name and filename.
No compiled vertex array support
This may cause performance loss in some applications.
No multitexturing support
This may cause performance loss in some applications.
No secondary color support
Some applications may not render polygon highlights correctly.
No S3TC compression support
This may cause performance loss in some applications.
No texture edge clamp support
This feature adds clamping control to edge texel filtering. Some programs may not render textures correctly (black line on borders.)
No vertex program support
This feature enables vertex programming (equivalent to DX8 Vertex Shader.) Some current or future OpenGL programs may require this feature.
No fragment program support
This feature enables per pixel programming (equivalent to DX9 Pixel Shader.) Some current or future OpenGL programs may require this feature.
No OpenGL Shading Language support
This may break compatibility for applications using per pixel shading.
No Frame buffer object support
This may break compatibility for applications using render to texture functions.
Few texture units found
This may slow down some applications using fragment programs or extensive texture mapping.
Extension verification:
GL_EXT_color_subtable was not found, but has the entry point glColorSubTableEXT
Thanks in advance for help.
PS: I'm from Poland, so keep it in mind ;)I dont know how to this but please note that Toshiba supports own drivers only. When you install driver directly from ATI you are on your own and it has nothing to do with Toshiba.
It is also recommended to use Toshiba drivers only.
For more questions about ATI drivers please visit THIS page. -
Flickering - radeon, awesome, xterm
Hi!
I'm setting up Arch on my notebook and I have problems with flickering.
The config is very basic - just Xorg, open source Radeon driver and awesome wm. When rearranging xterm windows using awesome they flicker and they are redrawn slowly. It takes few seconds for xterm running top to settle down and not flicker. It looks like video driver is not working properly or Xorg setup is wrong. I've checked similar config under VirtualBox on my PC and there were no similar issues.
Looking into dmesg and Xorg logs I could not find anything obvious for me. I tried adding Xorg config files with more specific settings of Monitor, Display etc, including DPI, display size, etc but with no luck. I'm not sure what should I check next and what could be the problem.
I'm posting both dmesg and Xorg logs below.
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.6.11-1-ARCH (tobias@testing) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Tue Dec 18 12:58:46 CET 2012
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001beeffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001bef0000-0x000000001befefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000001beff000-0x000000001befffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000001bf00000-0x000000001bffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI 2.3 present.
[ 0.000000] DMI: Hewlett-Packard Presario 2100 (PF180UA) /0024 , BIOS KAM1.59 04/19/2004
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1bef0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DAFFF uncachable
[ 0.000000] DB000-DBFFF write-protect
[ 0.000000] DC000-DFFFF write-back
[ 0.000000] E0000-E3FFF uncachable
[ 0.000000] E4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FF0000000 write-back
[ 0.000000] 1 base 010000000 mask FF8000000 write-back
[ 0.000000] 2 base 018000000 mask FFC000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped: [mem 0x00000000-0x00bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x1beeffff]
[ 0.000000] [mem 0x00000000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x1bbfffff] page 2M
[ 0.000000] [mem 0x1bc00000-0x1beeffff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x1beeffff @ [mem 0x00bfa000-0x00bfffff]
[ 0.000000] RAMDISK: [mem 0x1bc37000-0x1beeefff]
[ 0.000000] ACPI: RSDP 000f7290 00014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 1bef8b67 00030 (v01 PTLTD RSDT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 1befee2b 00074 (v01 ATI Raptor 06040000 ATI 000F4240)
[ 0.000000] ACPI: DSDT 1bef8b97 06294 (v01 ATI U1_M1535 06040000 MSFT 0100000D)
[ 0.000000] ACPI: FACS 1befffc0 00040
[ 0.000000] ACPI: BOOT 1befee9f 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 1befeec7 00139 (v01 PTLTD POWERNOW 06040000 LTP 00000001)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 446MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1bef0000
[ 0.000000] low ram: 0 - 1bef0000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x1beeffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x1beeffff]
[ 0.000000] On node 0 totalpages: 114303
[ 0.000000] free_area_init_node: node 0, pgdat c065acc0, node_mem_map db8b7200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 862 pages used for memmap
[ 0.000000] Normal zone: 109458 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
[ 0.000000] e820: [mem 0x1c000000-0xfffbffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @db8a6000 s32384 r0 d20864 u53248
[ 0.000000] pcpu-alloc: s32384 r0 d20864 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113409
[ 0.000000] Kernel command line: root=/dev/sda1 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 915200 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 442468k/457664k available (3974k kernel code, 14744k reserved, 1545k data, 536k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xdc6f0000 - 0xff7fe000 ( 561 MB)
lowmem : 0xc0000000 - 0xdbef0000 ( 446 MB)
.init : 0xc0664000 - 0xc06ea000 ( 536 kB)
.data : 0xc04e18b2 - 0xc0663fc0 (1545 kB)
.text : 0xc0100000 - 0xc04e18b2 (3974 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=db008000 soft=db00a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2120.375 MHz processor
[ 0.006670] Calibrating delay loop (skipped), value calculated using timer frequency.. 4242.44 BogoMIPS (lpj=7067916)
[ 0.006676] pid_max: default: 32768 minimum: 301
[ 0.006732] Security Framework initialized
[ 0.006745] AppArmor: AppArmor disabled by boot time parameter
[ 0.006781] Mount-cache hash table entries: 512
[ 0.007214] Initializing cgroup subsys cpuacct
[ 0.007219] Initializing cgroup subsys memory
[ 0.007239] Initializing cgroup subsys devices
[ 0.007243] Initializing cgroup subsys freezer
[ 0.007246] Initializing cgroup subsys net_cls
[ 0.007248] Initializing cgroup subsys blkio
[ 0.007307] mce: CPU supports 4 MCE banks
[ 0.007377] SMP alternatives: switching to UP code
[ 0.014617] Freeing SMP alternatives: 16k freed
[ 0.014639] ACPI: Core revision 20120711
[ 0.018909] ACPI: setting ELCR to 0200 (from 0e28)
[ 0.020105] ftrace: allocating 17427 entries in 35 pages
[ 0.026857] smpboot: weird, boot CPU (#0) not listed by the BIOS
[ 0.026864] smpboot: SMP motherboard not detected
[ 0.026868] smpboot: Local APIC not detected. Using dummy APIC emulation.
[ 0.026870] smpboot: SMP disabled
[ 0.026875] Performance Events:
[ 0.026882] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.026884] no hardware sampling interrupt available.
[ 0.026888] AMD PMU driver.
[ 0.026892] ... version: 0
[ 0.026894] ... bit width: 48
[ 0.026895] ... generic registers: 4
[ 0.026897] ... value mask: 0000ffffffffffff
[ 0.026899] ... max period: 00007fffffffffff
[ 0.026900] ... fixed-purpose events: 0
[ 0.026901] ... event mask: 000000000000000f
[ 0.053684] NMI watchdog: disabled (cpu0): not supported (no LAPIC?)
[ 0.053741] Brought up 1 CPUs
[ 0.053745] smpboot: Total of 1 processors activated (4242.44 BogoMIPS)
[ 0.054101] devtmpfs: initialized
[ 0.054434] PM: Registering ACPI NVS region [mem 0x1beff000-0x1befffff] (4096 bytes)
[ 0.055886] NET: Registered protocol family 16
[ 0.056191] ACPI: bus type pci registered
[ 0.068640] PCI: PCI BIOS revision 2.10 entry at 0xfd87b, last bus=2
[ 0.068643] PCI: Using configuration type 1 for base access
[ 0.069449] bio: create slab <bio-0> at 0
[ 0.069568] ACPI: Added _OSI(Module Device)
[ 0.069572] ACPI: Added _OSI(Processor Device)
[ 0.069574] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.069576] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.070519] ACPI: EC: Look up EC in DSDT
[ 0.077150] ACPI: Interpreter enabled
[ 0.077166] ACPI: (supports S0 S3 S4 S5)
[ 0.077190] ACPI: Using PIC for interrupt routing
[ 0.083736] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.086778] ACPI: No dock devices found.
[ 0.086788] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.086934] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.087145] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.087149] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000c3fff] (ignored)
[ 0.087152] pci_root PNP0A03:00: host bridge window [mem 0x000c4000-0x000c7fff] (ignored)
[ 0.087156] pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000cbfff] (ignored)
[ 0.087159] pci_root PNP0A03:00: host bridge window [mem 0x000cc000-0x000cffff] (ignored)
[ 0.087162] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d7fff] (ignored)
[ 0.087165] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000cefff] (ignored)
[ 0.087168] pci_root PNP0A03:00: host bridge window [mem 0x1c000000-0xfff7ffff] (ignored)
[ 0.087171] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.087174] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.087178] PCI: root bus 00: using default resources
[ 0.087185] pci_root PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.087244] PCI host bridge to bus 0000:00
[ 0.087252] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
[ 0.087256] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.087259] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.087263] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.087287] pci 0000:00:00.0: [1002:cab0] type 00 class 0x060000
[ 0.087302] pci 0000:00:00.0: reg 10: [mem 0xd4000000-0xd7ffffff pref]
[ 0.087308] pci 0000:00:00.0: reg 14: [mem 0xd0400000-0xd0400fff pref]
[ 0.087313] pci 0000:00:00.0: reg 18: [io 0x8090-0x8093]
[ 0.087367] pci 0000:00:01.0: [1002:700f] type 01 class 0x060400
[ 0.087404] pci 0000:00:02.0: [10b9:5237] type 00 class 0x0c0310
[ 0.087416] pci 0000:00:02.0: reg 10: [mem 0xd0002000-0xd0002fff]
[ 0.087467] pci 0000:00:02.0: PME# supported from D3cold
[ 0.087490] pci 0000:00:06.0: [10b9:5451] type 00 class 0x040100
[ 0.087503] pci 0000:00:06.0: reg 10: [io 0x8400-0x84ff]
[ 0.087512] pci 0000:00:06.0: reg 14: [mem 0xd0003000-0xd0003fff]
[ 0.087557] pci 0000:00:06.0: supports D1 D2
[ 0.087559] pci 0000:00:06.0: PME# supported from D2 D3hot D3cold
[ 0.087582] pci 0000:00:07.0: [10b9:1533] type 00 class 0x060100
[ 0.087664] pci 0000:00:08.0: [10b9:5457] type 00 class 0x070300
[ 0.087677] pci 0000:00:08.0: reg 10: [mem 0xd0004000-0xd0004fff]
[ 0.087685] pci 0000:00:08.0: reg 14: [io 0x8800-0x88ff]
[ 0.087728] pci 0000:00:08.0: PME# supported from D3hot D3cold
[ 0.087747] pci 0000:00:09.0: [14e4:4320] type 00 class 0x028000
[ 0.087760] pci 0000:00:09.0: reg 10: [mem 0xd0000000-0xd0001fff]
[ 0.087807] pci 0000:00:09.0: supports D1 D2
[ 0.087810] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.087830] pci 0000:00:0a.0: [104c:ac50] type 02 class 0x060700
[ 0.087844] pci 0000:00:0a.0: reg 10: [mem 0x00000000-0x00000fff]
[ 0.087866] pci 0000:00:0a.0: supports D1 D2
[ 0.087869] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.087892] pci 0000:00:10.0: [10b9:5229] type 00 class 0x0101b0
[ 0.087924] pci 0000:00:10.0: reg 20: [io 0x8080-0x808f]
[ 0.087967] pci 0000:00:11.0: [10b9:7101] type 00 class 0x068000
[ 0.088020] pci 0000:00:11.0: quirk: [io 0x8000-0x803f] claimed by ali7101 ACPI
[ 0.088025] pci 0000:00:11.0: quirk: [io 0x8040-0x805f] claimed by ali7101 SMB
[ 0.088046] pci 0000:00:12.0: [100b:0020] type 00 class 0x020000
[ 0.088059] pci 0000:00:12.0: reg 10: [io 0x8c00-0x8cff]
[ 0.088067] pci 0000:00:12.0: reg 14: [mem 0xd0005000-0xd0005fff]
[ 0.088097] pci 0000:00:12.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.088117] pci 0000:00:12.0: supports D1 D2
[ 0.088120] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.088150] pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-ff]
[ 0.088169] pci 0000:01:05.0: [1002:4336] type 00 class 0x030000
[ 0.088183] pci 0000:01:05.0: reg 10: [mem 0xe0000000-0xefffffff pref]
[ 0.088190] pci 0000:01:05.0: reg 14: [io 0x9000-0x90ff]
[ 0.088198] pci 0000:01:05.0: reg 18: [mem 0xd0100000-0xd010ffff]
[ 0.088220] pci 0000:01:05.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.088245] pci 0000:01:05.0: supports D1 D2
[ 0.088271] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.088278] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.088282] pci 0000:00:01.0: bridge window [mem 0xd0100000-0xd01fffff]
[ 0.088287] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff pref]
[ 0.088318] pci_bus 0000:02: busn_res: [bus 02-ff] is inserted under [bus 00-ff]
[ 0.088325] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 05
[ 0.088330] pci_bus 0000:00: on NUMA node 0
[ 0.088334] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.088406] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[ 0.088461] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.088465] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.090540] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 *10)
[ 0.090629] ACPI: PCI Interrupt Link [LNKB] (IRQs 7 *11)
[ 0.090715] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 10) *0, disabled.
[ 0.090802] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 10) *9
[ 0.090887] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 10) *0, disabled.
[ 0.090973] ACPI: PCI Interrupt Link [LNKF] (IRQs 7 11) *0, disabled.
[ 0.091057] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 10)
[ 0.091142] ACPI: PCI Interrupt Link [LNKH] (IRQs *5 7)
[ 0.091226] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 6 10) *9
[ 0.091380] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.091382] vgaarb: loaded
[ 0.091384] vgaarb: bridge control possible 0000:01:05.0
[ 0.091473] PCI: Using ACPI for IRQ routing
[ 0.091478] PCI: pci_cache_line_size set to 32 bytes
[ 0.091517] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.091521] e820: reserve RAM buffer [mem 0x1bef0000-0x1bffffff]
[ 0.091751] NetLabel: Initializing
[ 0.091754] NetLabel: domain hash size = 128
[ 0.091755] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.091784] NetLabel: unlabeled traffic allowed by default
[ 0.091827] Switching to clocksource pit
[ 0.102224] pnp: PnP ACPI init
[ 0.102270] ACPI: bus type pnp registered
[ 0.102562] pnp 00:00: [bus 00-ff]
[ 0.102569] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.102572] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.102575] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.102578] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.102581] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.102584] pnp 00:00: [mem 0x000d0000-0x000d7fff window]
[ 0.102587] pnp 00:00: [mem 0x000a0000-0x000cefff window]
[ 0.102590] pnp 00:00: [mem 0x1c000000-0xfff7ffff window]
[ 0.102594] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.102597] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.102600] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.102705] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.102916] pnp 00:01: [io 0x0000-0x000f]
[ 0.102920] pnp 00:01: [io 0x0081-0x008f]
[ 0.102922] pnp 00:01: [io 0x00c0-0x00df]
[ 0.102927] pnp 00:01: [dma 4]
[ 0.102975] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.102992] pnp 00:02: [io 0x0070-0x0073]
[ 0.103001] pnp 00:02: [irq 8]
[ 0.103037] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.103053] pnp 00:03: [io 0x00f0-0x00fe]
[ 0.103057] pnp 00:03: [irq 13]
[ 0.103092] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.103106] pnp 00:04: [io 0x0061]
[ 0.103167] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.103182] pnp 00:05: [io 0x0060]
[ 0.103185] pnp 00:05: [io 0x0064]
[ 0.103188] pnp 00:05: [irq 1]
[ 0.103224] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.103239] pnp 00:06: [irq 12]
[ 0.103276] pnp 00:06: Plug and Play ACPI device, IDs SYN0104 SYN0100 SYN0002 PNP0f13 (active)
[ 0.103295] pnp 00:07: [io 0x0080]
[ 0.103298] pnp 00:07: [io 0x00b0-0x00b3]
[ 0.103301] pnp 00:07: [io 0x0092]
[ 0.103303] pnp 00:07: [io 0x040b]
[ 0.103306] pnp 00:07: [io 0x0480-0x048f]
[ 0.103308] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.103311] pnp 00:07: [io 0x04d6]
[ 0.103313] pnp 00:07: [io 0x8000-0x807f]
[ 0.103316] pnp 00:07: [io 0xff00-0xff01]
[ 0.103319] pnp 00:07: [io 0x8004-0x8005]
[ 0.103321] pnp 00:07: [io 0xfe00-0xfefe]
[ 0.103324] pnp 00:07: [mem 0xd0400000-0xd0400fff]
[ 0.103363] pnp 00:07: disabling [io 0x8004-0x8005] because it overlaps 0000:00:11.0 BAR 13 [io 0x8000-0x803f]
[ 0.103427] system 00:07: [io 0x040b] has been reserved
[ 0.103431] system 00:07: [io 0x0480-0x048f] has been reserved
[ 0.103435] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.103439] system 00:07: [io 0x04d6] has been reserved
[ 0.103443] system 00:07: [io 0x8000-0x807f] could not be reserved
[ 0.103446] system 00:07: [io 0xff00-0xff01] has been reserved
[ 0.103450] system 00:07: [io 0xfe00-0xfefe] has been reserved
[ 0.103456] system 00:07: [mem 0xd0400000-0xd0400fff] has been reserved
[ 0.103462] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.103805] pnp 00:08: [io 0x03f0-0x03f5]
[ 0.103808] pnp 00:08: [io 0x03f7]
[ 0.103812] pnp 00:08: [irq 6]
[ 0.103814] pnp 00:08: [dma 2]
[ 0.103871] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.104241] pnp 00:09: [io 0x0378-0x037f]
[ 0.104244] pnp 00:09: [io 0x0778-0x077f]
[ 0.104247] pnp 00:09: [irq 7]
[ 0.104250] pnp 00:09: [dma 0]
[ 0.104537] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.104776] pnp 00:0a: [io 0x03f8-0x03ff]
[ 0.104780] pnp 00:0a: [irq 4]
[ 0.104909] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.105223] pnp: PnP ACPI: found 11 devices
[ 0.105226] ACPI: ACPI bus type pnp unregistered
[ 0.142421] Switching to clocksource acpi_pm
[ 0.142493] pci 0000:00:0a.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.142498] pci 0000:00:0a.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.142501] pci 0000:00:0a.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.142505] pci 0000:00:0a.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.142516] pci 0000:00:0a.0: BAR 0: assigned [mem 0x1c000000-0x1c000fff]
[ 0.142525] pci 0000:00:0a.0: BAR 15: assigned [mem 0x20000000-0x23ffffff pref]
[ 0.142529] pci 0000:00:0a.0: BAR 16: assigned [mem 0x24000000-0x27ffffff]
[ 0.142533] pci 0000:00:12.0: BAR 6: assigned [mem 0x1c010000-0x1c01ffff pref]
[ 0.142537] pci 0000:00:0a.0: BAR 13: assigned [io 0x1000-0x10ff]
[ 0.142541] pci 0000:00:0a.0: BAR 14: assigned [io 0x1400-0x14ff]
[ 0.142547] pci 0000:01:05.0: BAR 6: assigned [mem 0xd0120000-0xd013ffff pref]
[ 0.142552] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.142556] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.142562] pci 0000:00:01.0: bridge window [mem 0xd0100000-0xd01fffff]
[ 0.142566] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff pref]
[ 0.142572] pci 0000:00:0a.0: CardBus bridge to [bus 02-05]
[ 0.142575] pci 0000:00:0a.0: bridge window [io 0x1000-0x10ff]
[ 0.142580] pci 0000:00:0a.0: bridge window [io 0x1400-0x14ff]
[ 0.142584] pci 0000:00:0a.0: bridge window [mem 0x20000000-0x23ffffff pref]
[ 0.142589] pci 0000:00:0a.0: bridge window [mem 0x24000000-0x27ffffff]
[ 0.142608] pci 0000:00:0a.0: enabling device (0000 -> 0003)
[ 0.142761] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
[ 0.142765] PCI: setting IRQ 11 as level-triggered
[ 0.142773] pci 0000:00:0a.0: setting latency timer to 64
[ 0.142779] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.142782] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.142786] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
[ 0.142789] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd01fffff]
[ 0.142792] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff pref]
[ 0.142796] pci_bus 0000:02: resource 0 [io 0x1000-0x10ff]
[ 0.142799] pci_bus 0000:02: resource 1 [io 0x1400-0x14ff]
[ 0.142802] pci_bus 0000:02: resource 2 [mem 0x20000000-0x23ffffff pref]
[ 0.142805] pci_bus 0000:02: resource 3 [mem 0x24000000-0x27ffffff]
[ 0.142897] NET: Registered protocol family 2
[ 0.143174] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.143535] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.143889] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.143955] TCP: reno registered
[ 0.143959] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.143977] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.144077] NET: Registered protocol family 1
[ 0.144100] pci 0000:00:00.0: ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb
[ 0.144282] ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 10
[ 0.144286] PCI: setting IRQ 10 as level-triggered
[ 0.413415] pci 0000:00:07.0: Activating ISA DMA hang workarounds
[ 0.413447] pci 0000:01:05.0: Boot video device
[ 0.413452] PCI: CLS 64 bytes, default 32
[ 0.413587] Unpacking initramfs...
[ 0.503602] Freeing initrd memory: 2784k freed
[ 0.509892] Simple Boot Flag at 0x36 set to 0x1
[ 0.510126] apm: BIOS not found.
[ 0.510607] audit: initializing netlink socket (disabled)
[ 0.510646] type=2000 audit(1358706958.509:1): initialized
[ 0.523457] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.525587] VFS: Disk quotas dquot_6.5.2
[ 0.525655] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.525920] msgmni has been set to 869
[ 0.526240] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.526285] io scheduler noop registered
[ 0.526288] io scheduler deadline registered
[ 0.526298] io scheduler cfq registered (default)
[ 0.526746] GHES: HEST is not enabled!
[ 0.526764] isapnp: Scanning for PnP cards...
[ 0.795785] isapnp: No Plug & Play device found
[ 0.795846] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.816549] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.837660] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.838042] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 3
[ 0.838047] PCI: setting IRQ 3 as level-triggered
[ 0.838329] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 0.840414] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.840478] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.840617] mousedev: PS/2 mouse device common for all mice
[ 0.840940] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.840970] rtc0: alarms up to one month, y3k, 242 bytes nvram
[ 0.841007] cpuidle: using governor ladder
[ 0.841010] cpuidle: using governor menu
[ 0.841217] drop_monitor: Initializing network drop monitor service
[ 0.841372] TCP: cubic registered
[ 0.841559] NET: Registered protocol family 10
[ 0.841863] NET: Registered protocol family 17
[ 0.841889] Key type dns_resolver registered
[ 0.842040] Using IPI No-Shortcut mode
[ 0.842175] PM: Hibernation image not present or could not be loaded.
[ 0.842199] registered taskstats version 1
[ 0.842593] rtc_cmos 00:02: setting system clock to 2013-01-20 18:36:01 UTC (1358706961)
[ 0.842770] Freeing unused kernel memory: 536k freed
[ 0.843965] Write protecting the kernel text: 3976k
[ 0.843994] Write protecting the kernel read-only data: 1180k
[ 0.867357] systemd-udevd[35]: starting version 197
[ 0.873812] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.936921] FDC 0 is a post-1991 82077
[ 0.940986] SCSI subsystem initialized
[ 0.956309] ACPI: bus type usb registered
[ 0.956378] usbcore: registered new interface driver usbfs
[ 0.956398] usbcore: registered new interface driver hub
[ 0.958032] ACPI: bus type scsi registered
[ 0.959860] usbcore: registered new device driver usb
[ 0.960661] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.960747] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.960761] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 0.960803] ohci_hcd 0000:00:02.0: irq 10, io mem 0xd0002000
[ 0.963589] libata version 3.00 loaded.
[ 1.015711] hub 1-0:1.0: USB hub found
[ 1.015730] hub 1-0:1.0: 4 ports detected
[ 1.015891] pata_ali 0000:00:10.0: can't derive routing for PCI INT A
[ 1.018256] scsi0 : pata_ali
[ 1.018697] scsi1 : pata_ali
[ 1.018845] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8080 irq 14
[ 1.018849] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8088 irq 15
[ 1.177191] ata1.00: ATA-6: IC25N040ATMR04-0, MO2OAD0A, max UDMA/100
[ 1.177196] ata1.00: 78140160 sectors, multi 16: LBA48
[ 1.190389] ata1.00: configured for UDMA/100
[ 1.190649] scsi 0:0:0:0: Direct-Access ATA IC25N040ATMR04-0 MO2O PQ: 0 ANSI: 5
[ 1.373392] usb 1-2: new full-speed USB device number 2 using ohci_hcd
[ 1.373667] ata2.00: ATAPI: TSSTcorpCD/DVDW SN-S082D, SS03, max UDMA/33
[ 1.373671] ata2.00: WARNING: ATAPI DMA disabled for reliability issues. It can be enabled
[ 1.373673] ata2.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.
[ 1.403539] ata2.00: configured for UDMA/33
[ 1.411293] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW SN-S082D SS03 PQ: 0 ANSI: 5
[ 1.191105] ACPI: Invalid Power Resource to register!
[ 1.411676] ACPI: Invalid Power Resource to register!
[ 1.417997] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 1.418088] sd 0:0:0:0: [sda] Write Protect is off
[ 1.418092] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.418129] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.462655] sda: sda1 sda2
[ 1.463374] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.491992] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.492006] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.492908] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.510060] tsc: Refined TSC clocksource calibration: 2120.213 MHz
[ 1.510076] Switching to clocksource tsc
[ 1.622794] usbcore: registered new interface driver usbhid
[ 1.622804] usbhid: USB HID core driver
[ 1.626374] input: USB Multi-Smart Mouse as /devices/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/input/input1
[ 1.627212] hid-generic 0003:04FC:0801.0001: input,hidraw0: USB HID v1.11 Mouse [USB Multi-Smart Mouse] on usb-0000:00:02.0-2/input0
[ 2.175751] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.652368] ACPI: EC: GPE storm detected, transactions will use polling mode
[ 3.263466] systemd[1]: systemd 197 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 3.288044] systemd[1]: Set hostname to <skynet>.
[ 3.689776] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
[ 3.690297] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.690438] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.690464] systemd[1]: Starting Remote File Systems.
[ 3.690862] systemd[1]: Reached target Remote File Systems.
[ 3.690883] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.691216] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.691235] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.691536] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.691669] systemd[1]: Starting udev Kernel Socket.
[ 3.691971] systemd[1]: Listening on udev Kernel Socket.
[ 3.692050] systemd[1]: Starting udev Control Socket.
[ 3.692347] systemd[1]: Listening on udev Control Socket.
[ 3.692427] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.692914] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.692936] systemd[1]: Starting Encrypted Volumes.
[ 3.693202] systemd[1]: Reached target Encrypted Volumes.
[ 3.693234] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.693298] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.693320] systemd[1]: Expecting device dev-disk-by\x2duuid-3f31fd6e\x2d72f2\x2d4883\x2da8e8\x2dee56ba2b6e96.device...
[ 3.693610] systemd[1]: Starting Journal Socket.
[ 3.693947] systemd[1]: Listening on Journal Socket.
[ 3.693983] systemd[1]: Started File System Check on Root Device.
[ 3.694000] systemd[1]: Mounting Temporary Directory...
[ 3.759629] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.762532] systemd[1]: Mounting Huge Pages File System...
[ 3.803773] systemd[1]: Starting Apply Kernel Variables...
[ 4.017890] systemd[1]: Started Set Up Additional Binary Formats.
[ 4.031494] systemd[1]: Started Load Kernel Modules.
[ 4.031542] systemd[1]: Mounted Configuration File System.
[ 4.031570] systemd[1]: Starting Setup Virtual Console...
[ 4.033865] systemd[1]: Mounting Debug File System...
[ 4.037320] systemd[1]: Mounted FUSE Control File System.
[ 4.037526] systemd[1]: Starting udev Kernel Device Manager...
[ 4.043990] systemd[1]: Starting udev Coldplug all Devices...
[ 4.047235] systemd[1]: Starting Journal Service...
[ 4.051745] systemd[1]: Started Journal Service.
[ 4.051905] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 4.056292] systemd[1]: Mounted Temporary Directory.
[ 4.056902] systemd[1]: Mounted POSIX Message Queue File System.
[ 4.057326] systemd[1]: Mounted Huge Pages File System.
[ 4.057741] systemd[1]: Mounted Debug File System.
[ 4.353535] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[ 4.598642] systemd-udevd[83]: starting version 197
[ 5.123685] systemd[1]: Unit systemd-journald.service entered failed state
[ 5.123947] systemd[1]: systemd-journald.service holdoff time over, scheduling restart.
[ 5.124058] systemd[1]: Stopping Journal Service...
[ 5.124670] systemd[1]: Starting Journal Service...
[ 5.130250] systemd[1]: Started Journal Service.
[ 6.060202] yenta_cardbus 0000:00:0a.0: CardBus bridge found [103c:0024]
[ 6.060231] yenta_cardbus 0000:00:0a.0: Using CSCINT to route CSC interrupts to PCI
[ 6.060234] yenta_cardbus 0000:00:0a.0: Routing CardBus interrupts to PCI
[ 6.060239] yenta_cardbus 0000:00:0a.0: TI: mfunc 0x01111112, devctl 0x64
[ 6.066899] pci 0000:00:11.0: enabling device (0000 -> 0001)
[ 6.067944] alim1535_wdt: initialized. timeout=60 sec (nowayout=0)
[ 6.069773] alim7101_wdt: Steve Hill <[email protected]>
[ 6.069798] alim7101_wdt: Detected old alim7101 revision 'a1d'. If this is a cobalt board, set the 'use_gpio' module parameter.
[ 6.141120] microcode: AMD CPU family 0x6 not supported
[ 6.290481] yenta_cardbus 0000:00:0a.0: ISA IRQ mask 0x00b8, PCI irq 11
[ 6.290490] yenta_cardbus 0000:00:0a.0: Socket status: 30000006
[ 6.499629] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 6.499945] ACPI: Battery Slot [BAT1] (battery absent)
[ 6.501330] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input2
[ 6.639604] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 6.893520] alim7101_wdt: Steve Hill <[email protected]>
[ 6.893544] alim7101_wdt: Detected old alim7101 revision 'a1d'. If this is a cobalt board, set the 'use_gpio' module parameter.
[ 6.983648] tsc: Marking TSC unstable due to TSC halts in idle
[ 6.983763] ACPI: acpi_idle registered with cpuidle
[ 6.987013] Switching to clocksource acpi_pm
[ 7.038815] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 7.057667] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
[ 7.057680] PCI: setting IRQ 5 as level-triggered
[ 7.084849] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 7.087965] ACPI: Power Button [PWRB]
[ 7.088591] ACPI: AC Adapter [ACAD] (on-line)
[ 7.089419] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
[ 7.095566] Linux agpgart interface v0.103
[ 7.106746] natsemi dp8381x driver, version 2.1, Sept 11, 2006
originally by Donald Becker <[email protected]>
2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
[ 7.130175] ACPI: Lid Switch [LID]
[ 7.130900] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 7.131019] ACPI: Power Button [PWRF]
[ 7.220285] thermal LNXTHERM:00: registered as thermal_zone0
[ 7.220298] ACPI: Thermal Zone [THRM] (60 C)
[ 7.286538] parport_pc 00:09: reported by Plug and Play ACPI
[ 7.286616] parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 7.299576] ppdev: user-space parallel port driver
[ 7.424064] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[ 7.425327] excluding 0x170-0x177 0x1f0-0x1f7 0x200-0x207 0x220-0x22f 0x330-0x337 0x370-0x37f 0x388-0x38f
[ 7.426221] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[ 7.426660] excluding 0x3f0-0x3ff 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7
[ 7.427726] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[ 7.428490] clean.
[ 7.428514] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[ 7.429357] clean.
[ 7.429387] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 7.429399] excluding 0xc0000-0xfffff
[ 7.429423] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 7.429438] clean.
[ 7.429461] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 7.429473] clean.
[ 7.429496] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[ 7.431559] clean.
[ 7.550228] powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
[ 7.557694] powernow: No PST tables match this cpuid (0x7a0)
[ 7.557703] powernow: This is indicative of a broken BIOS.
[ 7.557704] powernow: Trying ACPI perflib
[ 7.557803] powernow: Minimum speed 530 MHz. Maximum speed 2120 MHz.
[ 7.799621] Adding 1004056k swap on /dev/sda2. Priority:-1 extents:1 across:1004056k
[ 7.817944] psmouse serio1: synaptics: Touchpad model: 1, fw: 5.9, id: 0x236eb3, caps: 0x904713/0x10008/0x0, board id: 3655, fw id: 753378
[ 7.852688] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 9.586736] AC'97 1 does not respond - RESET
[ 9.600071] AC'97 1 access is not valid [0xffffffff], removing mixer.
[ 9.600153] ali mixer 1 creating error.
[ 9.605763] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 9.608749] natsemi eth0: NatSemi DP8381[56] at 0xd0005000 (0000:00:12.0), 00:0f:20:c7:01:24, IRQ 11, port TP.
[ 9.610009] agpgart-ati 0000:00:00.0: Ati IGP320/M chipset
[ 9.612037] reserve_ram_pages_type failed [mem 0x1a87d000-0x1a87dfff], track 0x10, req 0x10
[ 9.612797] reserve_ram_pages_type failed [mem 0x1a87e000-0x1a87efff], track 0x10, req 0x10
[ 9.614329] reserve_ram_pages_type failed [mem 0x1a87f000-0x1a87ffff], track 0x10, req 0x10
[ 9.615179] reserve_ram_pages_type failed [mem 0x1a400000-0x1a400fff], track 0x10, req 0x10
[ 9.615941] reserve_ram_pages_type failed [mem 0x1a402000-0x1a402fff], track 0x10, req 0x10
[ 9.632019] reserve_ram_pages_type failed [mem 0x1a403000-0x1a403fff], track 0x10, req 0x10
[ 9.632963] reserve_ram_pages_type failed [mem 0x1b238000-0x1b238fff], track 0x10, req 0x10
[ 9.639528] reserve_ram_pages_type failed [mem 0x1aac8000-0x1aac8fff], track 0x10, req 0x10
[ 9.641076] reserve_ram_pages_type failed [mem 0x1aaf4000-0x1aaf4fff], track 0x10, req 0x10
[ 9.641840] reserve_ram_pages_type failed [mem 0x1a85e000-0x1a85efff], track 0x10, req 0x10
[ 9.642604] reserve_ram_pages_type failed [mem 0x1a85f000-0x1a85ffff], track 0x10, req 0x10
[ 9.650764] reserve_ram_pages_type failed [mem 0x1a864000-0x1a864fff], track 0x10, req 0x10
[ 9.651546] reserve_ram_pages_type failed [mem 0x1a865000-0x1a865fff], track 0x10, req 0x10
[ 9.652323] reserve_ram_pages_type failed [mem 0x1a404000-0x1a404fff], track 0x10, req 0x10
[ 9.653103] reserve_ram_pages_type failed [mem 0x1a405000-0x1a405fff], track 0x10, req 0x10
[ 9.655343] reserve_ram_pages_type failed [mem 0x1a406000-0x1a406fff], track 0x10, req 0x10
[ 9.656123] reserve_ram_pages_type failed [mem 0x1a407000-0x1a407fff], track 0x10, req 0x10
[ 9.660343] agpgart-ati 0000:00:00.0: AGP aperture is 64M @ 0xd4000000
[ 9.661066] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[ 9.661147] ssb: Found chip with id 0x4306, rev 0x02 and package 0x00
[ 9.661162] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x02, vendor 0x4243)
[ 9.661177] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x04, vendor 0x4243)
[ 9.661191] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x01, vendor 0x4243)
[ 9.661203] ssb: Core 3 found: V90 (cc 0x807, rev 0x01, vendor 0x4243)
[ 9.661214] ssb: Core 4 found: PCI (cc 0x804, rev 0x07, vendor 0x4243)
[ 9.661225] ssb: Core 5 found: IEEE 802.11 (cc 0x812, rev 0x04, vendor 0x4243)
[ 9.670177] ssb: Sonics Silicon Backplane found on PCI device 0000:00:09.0
[ 9.670382] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.777337] systemd-udevd[112]: renamed network interface eth0 to enp0s18
[ 9.873499] [drm] Initialized drm 1.1.0 20060810
[ 9.956840] cfg80211: Calling CRDA to update world regulatory domain
[ 10.157218] b43legacy-phy0: Broadcom 4306 WLAN found (core revision 4)
[ 10.190344] enp0s18: DSPCFG accepted after 0 usec.
[ 10.190366] enp0s18: link up.
[ 10.190398] enp0s18: Setting full-duplex based on negotiated link capability.
[ 10.198924] [drm] radeon defaulting to kernel modesetting.
[ 10.198939] [drm] radeon kernel modesetting enabled.
[ 10.199866] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 10.203846] Broadcom 43xx-legacy driver loaded [ Features: PLID ]
[ 10.206509] [drm] initializing kernel modesetting (RS100 0x1002:0x4336 0x103C:0x0024).
[ 10.206583] [drm] register mmio base: 0xD0100000
[ 10.206589] [drm] register mmio size: 65536
[ 10.208257] agpgart-ati 0000:00:00.0: AGP 2.0 bridge
[ 10.208304] agpgart-ati 0000:00:00.0: putting AGP V2 device into 4x mode
[ 10.208382] radeon 0000:01:05.0: putting AGP V2 device into 4x mode
[ 10.208400] radeon 0000:01:05.0: GTT: 64M 0xD4000000 - 0xD7FFFFFF
[ 10.208422] radeon 0000:01:05.0: VRAM: 64M 0x000000001C000000 - 0x000000001FFFFFFF (64M used)
[ 10.208461] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 10.208467] [drm] Driver supports precise vblank timestamp query.
[ 10.208505] [drm] radeon: irq initialized.
[ 10.209113] [drm] Detected VRAM RAM=64M, BAR=256M
[ 10.209134] [drm] RAM width 64bits DDR
[ 10.209414] [TTM] Zone kernel: Available graphics memory: 222902 kiB
[ 10.209422] [TTM] Initializing pool allocator
[ 10.209596] [drm] radeon: 64M of VRAM memory ready
[ 10.209607] [drm] radeon: 64M of GTT memory ready.
[ 10.233730] radeon 0000:01:05.0: WB disabled
[ 10.233767] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000d4000000 and cpu addr 0xdc702000
[ 10.235923] [drm] Loading R100 Microcode
[ 10.243857] b43legacy-phy0 ERROR: Firmware file "b43legacy/ucode4.fw" not found or load failed.
[ 10.243943] b43legacy-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 3).
[ 10.272796] [drm] radeon: ring at 0x00000000D4001000
[ 10.272843] [drm] ring test succeeded in 0 usecs
[ 10.274061] [drm] ib test succeeded in 0 usecs
[ 10.275769] [drm] Panel ID String: QDS
[ 10.275780] [drm] Panel Size 1024x768
[ 10.288375] [drm] radeon legacy LVDS backlight initialized
[ 10.288880] [drm] Radeon Display Connectors
[ 10.288889] [drm] Connector 0:
[ 10.288897] [drm] VGA-1
[ 10.288908] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 10.288913] [drm] Encoders:
[ 10.288918] [drm] CRT1: INTERNAL_DAC1
[ 10.288924] [drm] Connector 1:
[ 10.288930] [drm] LVDS-1
[ 10.288940] [drm] DDC: 0x198 0x198 0x19c 0x19c 0x1a0 0x1a0 0x1a4 0x1a4
[ 10.288945] [drm] Encoders:
[ 10.288950] [drm] LCD1: INTERNAL_LVDS
[ 10.288955] [drm] Connector 2:
[ 10.288961] [drm] SVIDEO-1
[ 10.288965] [drm] Encoders:
[ 10.288970] [drm] TV1: INTERNAL_DAC2
[ 10.393102] [drm] fb mappable at 0xE0040000
[ 10.393114] [drm] vram apper at 0xE0000000
[ 10.393119] [drm] size 3145728
[ 10.393125] [drm] fb depth is 24
[ 10.393131] [drm] pitch is 4096
[ 10.394511] fbcon: radeondrmfb (fb0) is primary device
[ 10.472464] Console: switching to colour frame buffer device 128x48
[ 10.485936] fb0: radeondrmfb frame buffer device
[ 10.485939] drm: registered panic notifier
[ 10.485953] [drm] Initialized radeon 2.24.0 20080528 for 0000:01:05.0 on minor 0
Xorg.0.log
[ 699.289]
X.Org X Server 1.13.1
Release Date: 2012-12-13
[ 699.290] X Protocol Version 11, Revision 0
[ 699.290] Build Operating System: Linux 3.7.0-1-ARCH i686
[ 699.290] Current Operating System: Linux skynet 3.6.11-1-ARCH #1 SMP PREEMPT Tue Dec 18 12:58:46 CET 2012 i686
[ 699.291] Kernel command line: root=/dev/sda1 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
[ 699.291] Build Date: 16 December 2012 04:52:09PM
[ 699.291]
[ 699.292] Current version of pixman: 0.28.2
[ 699.292] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 699.292] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 699.294] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 20 19:47:39 2013
[ 699.360] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 699.384] (==) No Layout section. Using the first Screen section.
[ 699.384] (==) No screen section available. Using defaults.
[ 699.384] (**) |-->Screen "Default Screen Section" (0)
[ 699.384] (**) | |-->Monitor "<default monitor>"
[ 699.404] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 699.404] (**) | |-->Device "Radeon"
[ 699.404] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 699.404] (==) Automatically adding devices
[ 699.404] (==) Automatically enabling devices
[ 699.404] (==) Automatically adding GPU devices
[ 699.464] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 699.464] Entry deleted from font path.
[ 699.464] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 699.464] Entry deleted from font path.
[ 699.464] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 699.464] Entry deleted from font path.
[ 699.480] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 699.480] Entry deleted from font path.
[ 699.480] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 699.480] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 699.480] Entry deleted from font path.
[ 699.480] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 699.480] (==) FontPath set to:
/usr/share/fonts/misc/
[ 699.480] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 699.480] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 699.500] (II) Loader magic: 0x825a640
[ 699.500] (II) Module ABI versions:
[ 699.500] X.Org ANSI C Emulation: 0.4
[ 699.500] X.Org Video Driver: 13.1
[ 699.500] X.Org XInput driver : 18.0
[ 699.500] X.Org Server Extension : 7.0
[ 699.502] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 699.506] (--) PCI:*(0:1:5:0) 1002:4336:103c:0024 rev 0, Mem @ 0xe0000000/268435456, 0xd0100000/65536, I/O @ 0x00009000/256, BIOS @ 0x????????/131072
[ 699.506] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 699.507] Initializing built-in extension Generic Event Extension
[ 699.508] Initializing built-in extension SHAPE
[ 699.508] Initializing built-in extension MIT-SHM
[ 699.508] Initializing built-in extension XInputExtension
[ 699.508] Initializing built-in extension XTEST
[ 699.515] Initializing built-in extension BIG-REQUESTS
[ 699.521] Initializing built-in extension SYNC
[ 699.527] Initializing built-in extension XKEYBOARD
[ 699.533] Initializing built-in extension XC-MISC
[ 699.539] Initializing built-in extension SECURITY
[ 699.544] Initializing built-in extension XINERAMA
[ 699.550] Initializing built-in extension XFIXES
[ 699.555] Initializing built-in extension RENDER
[ 699.560] Initializing built-in extension RANDR
[ 699.565] Initializing built-in extension COMPOSITE
[ 699.570] Initializing built-in extension DAMAGE
[ 699.575] Initializing built-in extension MIT-SCREEN-SAVER
[ 699.580] Initializing built-in extension DOUBLE-BUFFER
[ 699.585] Initializing built-in extension RECORD
[ 699.589] Initializing built-in extension DPMS
[ 699.594] Initializing built-in extension X-Resource
[ 699.599] Initializing built-in extension XVideo
[ 699.603] Initializing built-in extension XVideo-MotionCompensation
[ 699.608] Initializing built-in extension XFree86-VidModeExtension
[ 699.613] Initializing built-in extension XFree86-DGA
[ 699.617] Initializing built-in extension XFree86-DRI
[ 699.622] Initializing built-in extension DRI2
[ 699.622] (II) LoadModule: "glx"
[ 699.643] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 699.710] (II) Module glx: vendor="X.Org Foundation"
[ 699.710] compiled for 1.13.1, module version = 1.0.0
[ 699.711] ABI class: X.Org Server Extension, version 7.0
[ 699.711] (==) AIGLX enabled
[ 699.716] Loading extension GLX
[ 699.716] (II) LoadModule: "radeon"
[ 699.739] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 699.805] (II) Module radeon: vendor="X.Org Foundation"
[ 699.805] compiled for 1.13.0, module version = 7.0.0
[ 699.806] Module class: X.Org Video Driver
[ 699.806] ABI class: X.Org Video Driver, version 13.0
[ 699.806] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE
[ 699.829] (++) using VT number 1
[ 699.843] (II) [KMS] Kernel modesetting enabled.
[ 699.844] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 699.844] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 699.844] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 699.844] (==) RADEON(0): Default visual is TrueColor
[ 699.844] (==) RADEON(0): RGB weight 888
[ 699.844] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 699.844] (--) RADEON(0): Chipset: "ATI Radeon IGP320M (U1) 4336" (ChipID = 0x4336)
[ 699.844] (II) Loading sub module "dri2"
[ 699.844] (II) LoadModule: "dri2"
[ 699.845] (II) Module "dri2" already built-in
[ 699.845] (II) Loading sub module "exa"
[ 699.845] (II) LoadModule: "exa"
[ 699.845] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 699.866] (II) Module exa: vendor="X.Org Foundation"
[ 699.866] compiled for 1.13.1, module version = 2.6.0
[ 699.866] ABI class: X.Org Video Driver, version 13.1
[ 699.866] (II) RADEON(0): KMS Color Tiling: disabled
[ 699.866] (II) RADEON(0): KMS Color Tiling 2D: disabled
[ 699.866] (II) RADEON(0): KMS Pageflipping: enabled
[ 699.866] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 699.903] (II) RADEON(0): Output VGA-0 has no monitor section
[ 699.903] (II) RADEON(0): Output LVDS has no monitor section
[ 699.909] (II) RADEON(0): Output S-video has no monitor section
[ 699.946] (II) RADEON(0): EDID for output VGA-0
[ 699.946] (II) RADEON(0): EDID for output LVDS
[ 699.946] (II) RADEON(0): Manufacturer: QDS Model: 11 Serial#: 0
[ 699.946] (II) RADEON(0): Year: 2094 Week: 28
[ 699.946] (II) RADEON(0): EDID Version: 1.2
[ 699.946] (II) RADEON(0): Digital Display Input
[ 699.946] (II) RADEON(0): Max Image Size [cm]: horiz.: 30 vert.: 23
[ 699.946] (II) RADEON(0): Gamma: 2.20
[ 699.946] (II) RADEON(0): No DPMS capabilities specified
[ 699.946] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 699.946] (II) RADEON(0): First detailed timing is preferred mode
[ 699.946] (II) RADEON(0): redX: 0.591 redY: 0.325 greenX: 0.314 greenY: 0.562
[ 699.94The flickering issue is included in awesome-FS#1084
satori wrote:Do you have any suggestions?
For future reference, you should look for and report about awesome issues on the awesome bugtracker. The dev doesn't use arch and won't be looking through these forums.
Last edited by tdy (2013-01-23 03:54:45) -
Radeon driver on HD7770: Direct rendering disabled
Hi, i have strange issue here. DRI is just not working. I am trying to fix this shit already a week, or maybe even more. Help someone. pls.
Installed pkgs
linux-firmware
amd-ucode
xf86-video-ati
ati-dri
lib32-ati-dri
glu
libegl
libgbm
libgl
libglapi
libgles
mesa
lib32-mesa
mesa-demos
Kms currently in early start(in late start no changes). If kms disabled from kernel by grub cmd line or radeon.conf in modprobe.d, same story.
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.6.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Mon Nov 26 22:10:40 CET 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=6820a5fc-5e11-4854-929c-62edccd80ff8 resume=/dev/sda6 ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e6000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cffaffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cffb0000-0x00000000cffbdfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cffbe000-0x00000000cffdffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cffe0000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff700000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: BIOSTAR Group TA770XE3/TA770XE3, BIOS 080014 09/01/2010
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000230000000 aka 8960M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcffb0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xcffaffff]
[ 0.000000] [mem 0x00000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xcfdfffff] page 2M
[ 0.000000] [mem 0xcfe00000-0xcffaffff] page 4k
[ 0.000000] kernel direct mapping tables up to 0xcffaffff @ [mem 0x1fffd000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x22fffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
[ 0.000000] [mem 0x200000000-0x22fffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x22fffffff @ [mem 0xcffae000-0xcffaffff]
[ 0.000000] RAMDISK: [mem 0x378dc000-0x37c65fff]
[ 0.000000] ACPI: RSDP 00000000000fb360 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000cffb0100 00054 (v01 090110 XSDT1718 20100901 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cffb0290 000F4 (v03 090110 FACP1718 20100901 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cffb0450 0952E (v01 78XBD 78XBD901 00000001 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000cffbe000 00040
[ 0.000000] ACPI: APIC 00000000cffb0390 0007C (v01 090110 APIC1718 20100901 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cffb0410 0003C (v01 090110 OEMMCFG 20100901 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000cffb9980 000D8 (v03 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: HPET 00000000cffb9a60 00038 (v01 090110 OEMHPET 20100901 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cffb9aa0 00672 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xcfffffff]
[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x22fffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xcfffffff] -> [mem 0x00000000-0xcfffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0xcfffffff] + [mem 0x100000000-0x22fffffff] -> [mem 0x00000000-0x22fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x22fffffff]
[ 0.000000] NODE_DATA [mem 0x22fffc000-0x22fffffff]
[ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227600000-ffff88022f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x22fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xcffaffff]
[ 0.000000] node 0: [mem 0x100000000-0x22fffffff]
[ 0.000000] On node 0 totalpages: 2096959
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 831472 pages, LIFO batch:31
[ 0.000000] Normal zone: 19456 pages used for memmap
[ 0.000000] Normal zone: 1225728 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 3, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] smpboot: Allowing 6 CPUs, 3 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
[ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cffb0000 - 00000000cffbe000
[ 0.000000] PM: Registered nosave memory: 00000000cffbe000 - 00000000cffe0000
[ 0.000000] PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000ff700000
[ 0.000000] PM: Registered nosave memory: 00000000ff700000 - 0000000100000000
[ 0.000000] e820: [mem 0xd0000000-0xff6fffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022fc00000 s84608 r8192 d21888 u262144
[ 0.000000] pcpu-alloc: s84608 r8192 d21888 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2061113
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=6820a5fc-5e11-4854-929c-62edccd80ff8 resume=/dev/sda6 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ ffda000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000
[ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000
[ 0.000000] Memory: 8109632k/9175040k available (4727k kernel code, 787204k absent, 278204k reserved, 4143k data, 772k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
[ 0.000000] NR_IRQS:4352 nr_irqs:728 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 3300.452 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6603.94 BogoMIPS (lpj=11001506)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000028] Security Framework initialized
[ 0.000031] AppArmor: AppArmor disabled by boot time parameter
[ 0.000423] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.003268] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.004597] Mount-cache hash table entries: 256
[ 0.004774] Initializing cgroup subsys cpuacct
[ 0.004776] Initializing cgroup subsys memory
[ 0.004784] Initializing cgroup subsys devices
[ 0.004785] Initializing cgroup subsys freezer
[ 0.004786] Initializing cgroup subsys net_cls
[ 0.004787] Initializing cgroup subsys blkio
[ 0.004806] tseg: 0000000000
[ 0.004817] CPU: Physical Processor ID: 0
[ 0.004817] CPU: Processor Core ID: 0
[ 0.004819] mce: CPU supports 6 MCE banks
[ 0.004823] LVT offset 0 assigned for vector 0xf9
[ 0.004827] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
tlb_flushall_shift is 0xffffffff
[ 0.005367] ACPI: Core revision 20120711
[ 0.013974] ftrace: allocating 18348 entries in 72 pages
[ 0.020364] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.053342] smpboot: CPU0: AMD Athlon(tm) II X3 455 Processor stepping 03
[ 0.159231] Performance Events: AMD PMU driver.
[ 0.159233] ... version: 0
[ 0.159234] ... bit width: 48
[ 0.159235] ... generic registers: 4
[ 0.159236] ... value mask: 0000ffffffffffff
[ 0.159236] ... max period: 00007fffffffffff
[ 0.159237] ... fixed-purpose events: 0
[ 0.159238] ... event mask: 000000000000000f
[ 0.185941] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.199228] smpboot: Booting Node 0, Processors #1 #2
[ 0.235728] Brought up 3 CPUs
[ 0.235731] smpboot: Total of 3 processors activated (19810.82 BogoMIPS)
[ 0.236361] devtmpfs: initialized
[ 0.237998] PM: Registering ACPI NVS region [mem 0xcffbe000-0xcffdffff] (139264 bytes)
[ 0.238734] NET: Registered protocol family 16
[ 0.238826] node 0 link 0: io port [1000, ffffff]
[ 0.238828] TOM: 00000000d0000000 aka 3328M
[ 0.238830] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.238831] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.238833] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.238835] node 0 link 0: mmio [a0000, bffff]
[ 0.238836] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.238837] TOM2: 0000000230000000 aka 8960M
[ 0.238839] bus: [bus 00-07] on node 0 link 0
[ 0.238840] bus: 00 [io 0x0000-0xffff]
[ 0.238840] bus: 00 [mem 0xf0000000-0xffffffff]
[ 0.238841] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.238842] bus: 00 [mem 0xd0000000-0xdfffffff]
[ 0.238843] bus: 00 [mem 0x230000000-0xfcffffffff]
[ 0.238886] ACPI: bus type pci registered
[ 0.238934] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.238935] PCI: not using MMCONFIG
[ 0.238936] PCI: Using configuration type 1 for base access
[ 0.238937] PCI: Using configuration type 1 for extended access
[ 0.239117] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.239118] mtrr: probably your BIOS does not setup all CPUs.
[ 0.239118] mtrr: corrected configuration.
[ 0.239456] bio: create slab <bio-0> at 0
[ 0.239588] ACPI: Added _OSI(Module Device)
[ 0.239591] ACPI: Added _OSI(Processor Device)
[ 0.239592] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.239592] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.240094] ACPI: EC: Look up EC in DSDT
[ 0.240947] ACPI: Executed 5 blocks of module-level executable AML code
[ 0.243065] ACPI: Interpreter enabled
[ 0.243070] ACPI: (supports S0 S1 S4 S5)
[ 0.243083] ACPI: Using IOAPIC for interrupt routing
[ 0.243100] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.243680] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.263207] ACPI: No dock devices found.
[ 0.263212] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.263269] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.263374] PCI host bridge to bus 0000:00
[ 0.263377] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
[ 0.263378] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.263380] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.263381] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.263383] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.263384] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.263386] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
[ 0.263387] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[ 0.263396] pci 0000:00:00.0: [1002:5957] type 00 class 0x060000
[ 0.263405] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.263435] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
[ 0.263461] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.263476] pci 0000:00:07.0: [1002:597d] type 01 class 0x060400
[ 0.263502] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.263531] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
[ 0.263551] pci 0000:00:11.0: reg 10: [io 0xc000-0xc007]
[ 0.263559] pci 0000:00:11.0: reg 14: [io 0xb000-0xb003]
[ 0.263568] pci 0000:00:11.0: reg 18: [io 0xa000-0xa007]
[ 0.263577] pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003]
[ 0.263585] pci 0000:00:11.0: reg 20: [io 0x8000-0x800f]
[ 0.263594] pci 0000:00:11.0: reg 24: [mem 0xfe9ff800-0xfe9ffbff]
[ 0.263613] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.263665] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.263677] pci 0000:00:12.0: reg 10: [mem 0xfe9fe000-0xfe9fefff]
[ 0.263738] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
[ 0.263750] pci 0000:00:12.1: reg 10: [mem 0xfe9fd000-0xfe9fdfff]
[ 0.263816] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.263833] pci 0000:00:12.2: reg 10: [mem 0xfe9ff000-0xfe9ff0ff]
[ 0.263911] pci 0000:00:12.2: supports D1 D2
[ 0.263912] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.263934] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.263946] pci 0000:00:13.0: reg 10: [mem 0xfe9fc000-0xfe9fcfff]
[ 0.264006] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
[ 0.264019] pci 0000:00:13.1: reg 10: [mem 0xfe9fb000-0xfe9fbfff]
[ 0.264084] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.264101] pci 0000:00:13.2: reg 10: [mem 0xfe9fa800-0xfe9fa8ff]
[ 0.264179] pci 0000:00:13.2: supports D1 D2
[ 0.264180] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.264204] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.264297] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
[ 0.264312] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.264320] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.264329] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.264337] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.264346] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
[ 0.264400] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.264419] pci 0000:00:14.2: reg 10: [mem 0xfe9f4000-0xfe9f7fff 64bit]
[ 0.264481] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.264495] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.264566] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.264606] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.264618] pci 0000:00:14.5: reg 10: [mem 0xfe9f9000-0xfe9f9fff]
[ 0.264681] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.264693] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.264703] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.264712] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.264724] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.264756] pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-ff]
[ 0.264766] pci 0000:01:00.0: [1002:683d] type 00 class 0x030000
[ 0.264775] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.264782] pci 0000:01:00.0: reg 18: [mem 0xfeac0000-0xfeafffff 64bit]
[ 0.264788] pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff]
[ 0.264796] pci 0000:01:00.0: reg 30: [mem 0xfeaa0000-0xfeabffff pref]
[ 0.264824] pci 0000:01:00.0: supports D1 D2
[ 0.264825] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[ 0.264844] pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
[ 0.264853] pci 0000:01:00.1: reg 10: [mem 0xfea9c000-0xfea9ffff 64bit]
[ 0.264900] pci 0000:01:00.1: supports D1 D2
[ 0.269163] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.269170] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.269172] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.269175] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.269196] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff]
[ 0.269217] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.269230] pci 0000:02:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.269249] pci 0000:02:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[ 0.269261] pci 0000:02:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
[ 0.269269] pci 0000:02:00.0: reg 30: [mem 0xfebe0000-0xfebfffff pref]
[ 0.269315] pci 0000:02:00.0: supports D1 D2
[ 0.269317] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.275825] pci 0000:00:07.0: PCI bridge to [bus 02]
[ 0.275831] pci 0000:00:07.0: bridge window [io 0xe000-0xefff]
[ 0.275833] pci 0000:00:07.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.275836] pci 0000:00:07.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.275851] pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-ff]
[ 0.275898] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
[ 0.275907] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.275908] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.275909] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.275911] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.275912] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
[ 0.275914] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.275927] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.276055] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.276077] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
[ 0.276106] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.276147] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.276149] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.278757] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
[ 0.278785] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
[ 0.278809] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[ 0.278832] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
[ 0.278855] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.278880] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.278903] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 *9 10 11 12 14 15)
[ 0.278926] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.279015] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.279017] vgaarb: loaded
[ 0.279017] vgaarb: bridge control possible 0000:01:00.0
[ 0.279046] PCI: Using ACPI for IRQ routing
[ 0.287252] PCI: pci_cache_line_size set to 64 bytes
[ 0.287258] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[ 0.287314] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.287315] e820: reserve RAM buffer [mem 0xcffb0000-0xcfffffff]
[ 0.287385] NetLabel: Initializing
[ 0.287385] NetLabel: domain hash size = 128
[ 0.287386] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.287394] NetLabel: unlabeled traffic allowed by default
[ 0.287409] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.287412] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.289438] Switching to clocksource hpet
[ 0.293692] pnp: PnP ACPI init
[ 0.293708] ACPI: bus type pnp registered
[ 0.293795] pnp 00:00: [bus 00-ff]
[ 0.293797] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.293798] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.293800] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.293801] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.293802] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.293804] pnp 00:00: [mem 0xd0000000-0xdfffffff window]
[ 0.293808] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.293850] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.293873] pnp 00:01: [dma 4]
[ 0.293875] pnp 00:01: [io 0x0000-0x000f]
[ 0.293876] pnp 00:01: [io 0x0081-0x0083]
[ 0.293877] pnp 00:01: [io 0x0087]
[ 0.293878] pnp 00:01: [io 0x0089-0x008b]
[ 0.293879] pnp 00:01: [io 0x008f]
[ 0.293880] pnp 00:01: [io 0x00c0-0x00df]
[ 0.293898] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.293904] pnp 00:02: [io 0x0070-0x0071]
[ 0.293913] pnp 00:02: [irq 8]
[ 0.293927] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.293933] pnp 00:03: [io 0x0061]
[ 0.293950] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.293954] pnp 00:04: [io 0x00f0-0x00ff]
[ 0.293958] pnp 00:04: [irq 13]
[ 0.293972] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.294136] pnp 00:05: [mem 0xfed00000-0xfed003ff]
[ 0.294153] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.294179] pnp 00:06: [mem 0xfec00000-0xfec00fff]
[ 0.294180] pnp 00:06: [mem 0xfee00000-0xfee00fff]
[ 0.294219] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.294221] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.294223] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.294269] pnp 00:07: [io 0x0010-0x001f]
[ 0.294270] pnp 00:07: [io 0x0022-0x003f]
[ 0.294271] pnp 00:07: [io 0x0062-0x0063]
[ 0.294272] pnp 00:07: [io 0x0065-0x006f]
[ 0.294274] pnp 00:07: [io 0x0072-0x007f]
[ 0.294275] pnp 00:07: [io 0x0080]
[ 0.294276] pnp 00:07: [io 0x0084-0x0086]
[ 0.294277] pnp 00:07: [io 0x0088]
[ 0.294278] pnp 00:07: [io 0x008c-0x008e]
[ 0.294279] pnp 00:07: [io 0x0090-0x009f]
[ 0.294280] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.294281] pnp 00:07: [io 0x00b1]
[ 0.294282] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.294283] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.294284] pnp 00:07: [io 0x040b]
[ 0.294285] pnp 00:07: [io 0x04d6]
[ 0.294287] pnp 00:07: [io 0x0c00-0x0c01]
[ 0.294288] pnp 00:07: [io 0x0c14]
[ 0.294289] pnp 00:07: [io 0x0c50-0x0c51]
[ 0.294290] pnp 00:07: [io 0x0c52]
[ 0.294291] pnp 00:07: [io 0x0c6c]
[ 0.294292] pnp 00:07: [io 0x0c6f]
[ 0.294293] pnp 00:07: [io 0x0cd0-0x0cd1]
[ 0.294294] pnp 00:07: [io 0x0cd2-0x0cd3]
[ 0.294295] pnp 00:07: [io 0x0cd4-0x0cd5]
[ 0.294296] pnp 00:07: [io 0x0cd6-0x0cd7]
[ 0.294299] pnp 00:07: [io 0x0cd8-0x0cdf]
[ 0.294300] pnp 00:07: [io 0x0800-0x089f]
[ 0.294301] pnp 00:07: [io 0x0b20-0x0b2f]
[ 0.294303] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
[ 0.294304] pnp 00:07: [io 0x0900-0x090f]
[ 0.294305] pnp 00:07: [io 0x0910-0x091f]
[ 0.294306] pnp 00:07: [io 0xfe00-0xfefe]
[ 0.294307] pnp 00:07: [mem 0xffb80000-0xffbfffff]
[ 0.294308] pnp 00:07: [mem 0xfec10000-0xfec1001f]
[ 0.294355] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.294357] system 00:07: [io 0x040b] has been reserved
[ 0.294358] system 00:07: [io 0x04d6] has been reserved
[ 0.294360] system 00:07: [io 0x0c00-0x0c01] has been reserved
[ 0.294361] system 00:07: [io 0x0c14] has been reserved
[ 0.294362] system 00:07: [io 0x0c50-0x0c51] has been reserved
[ 0.294364] system 00:07: [io 0x0c52] has been reserved
[ 0.294365] system 00:07: [io 0x0c6c] has been reserved
[ 0.294367] system 00:07: [io 0x0c6f] has been reserved
[ 0.294368] system 00:07: [io 0x0cd0-0x0cd1] has been reserved
[ 0.294370] system 00:07: [io 0x0cd2-0x0cd3] has been reserved
[ 0.294371] system 00:07: [io 0x0cd4-0x0cd5] has been reserved
[ 0.294373] system 00:07: [io 0x0cd6-0x0cd7] has been reserved
[ 0.294374] system 00:07: [io 0x0cd8-0x0cdf] has been reserved
[ 0.294376] system 00:07: [io 0x0800-0x089f] has been reserved
[ 0.294377] system 00:07: [io 0x0b20-0x0b2f] has been reserved
[ 0.294379] system 00:07: [io 0x0900-0x090f] has been reserved
[ 0.294380] system 00:07: [io 0x0910-0x091f] has been reserved
[ 0.294382] system 00:07: [io 0xfe00-0xfefe] has been reserved
[ 0.294383] system 00:07: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.294385] system 00:07: [mem 0xfec10000-0xfec1001f] has been reserved
[ 0.294387] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.294485] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 0.294487] pnp 00:08: [io 0x0e00-0x0e0f]
[ 0.294488] pnp 00:08: [io 0x0e80-0x0e8f]
[ 0.294489] pnp 00:08: [io 0x0f40-0x0f4f]
[ 0.294490] pnp 00:08: [io 0x0a30-0x0a3f]
[ 0.294515] system 00:08: [io 0x0e00-0x0e0f] has been reserved
[ 0.294517] system 00:08: [io 0x0e80-0x0e8f] has been reserved
[ 0.294518] system 00:08: [io 0x0f40-0x0f4f] has been reserved
[ 0.294520] system 00:08: [io 0x0a30-0x0a3f] has been reserved
[ 0.294521] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.294814] pnp 00:09: [io 0x03f8-0x03ff]
[ 0.294817] pnp 00:09: [irq 4]
[ 0.294819] pnp 00:09: [dma 0 disabled]
[ 0.294877] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.294896] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 0.294922] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.294924] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.295589] pnp 00:0b: [mem 0x00000000-0x0009ffff]
[ 0.295593] pnp 00:0b: [mem 0x000c0000-0x000cffff]
[ 0.295594] pnp 00:0b: [mem 0x000e0000-0x000fffff]
[ 0.295596] pnp 00:0b: [mem 0x00100000-0xcfffffff]
[ 0.295597] pnp 00:0b: [mem 0xfec00000-0xffffffff]
[ 0.295602] pnp 00:0b: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.295605] pnp 00:0b: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.295606] pnp 00:0b: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.295608] pnp 00:0b: disabling [mem 0x00100000-0xcfffffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.295676] system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.295679] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.295746] pnp: PnP ACPI: found 12 devices
[ 0.295747] ACPI: ACPI bus type pnp unregistered
[ 0.301953] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.301957] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.301959] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.301961] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.301964] pci 0000:00:07.0: PCI bridge to [bus 02]
[ 0.301966] pci 0000:00:07.0: bridge window [io 0xe000-0xefff]
[ 0.301968] pci 0000:00:07.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.301970] pci 0000:00:07.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.301972] pci 0000:00:14.4: PCI bridge to [bus 03]
[ 0.302004] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.302006] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.302007] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.302009] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.302010] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.302011] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.302013] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.302014] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.302015] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.302017] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.302018] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.302020] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.302021] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.302023] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.302024] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.302025] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.302026] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.302028] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.302060] NET: Registered protocol family 2
[ 0.302505] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.305279] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.305623] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.305670] TCP: reno registered
[ 0.305682] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.305738] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.305852] NET: Registered protocol family 1
[ 0.709156] pci 0000:01:00.0: Boot video device
[ 0.709164] PCI: CLS 64 bytes, default 64
[ 0.709211] Unpacking initramfs...
[ 0.763840] Freeing initrd memory: 3624k freed
[ 0.768681] PCI-DMA: Disabling AGP.
[ 0.768756] PCI-DMA: aperture base @ c4000000 size 65536 KB
[ 0.768757] PCI-DMA: using GART IOMMU.
[ 0.768759] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.770950] LVT offset 1 assigned for vector 0x400
[ 0.770961] IBS: LVT offset 1 assigned
[ 0.770991] perf: AMD IBS detected (0x0000001f)
[ 0.771163] audit: initializing netlink socket (disabled)
[ 0.771174] type=2000 audit(1354687482.663:1): initialized
[ 0.779373] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.781185] VFS: Disk quotas dquot_6.5.2
[ 0.781221] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.781361] msgmni has been set to 15975
[ 0.781756] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.781858] io scheduler noop registered
[ 0.781862] io scheduler deadline registered
[ 0.781917] io scheduler cfq registered (default)
[ 0.782032] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.782139] pcieport 0000:00:07.0: irq 41 for MSI/MSI-X
[ 0.782269] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 0.782271] vesafb: scrolling: redraw
[ 0.782273] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.782627] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011600000, using 8128k, total 8128k
[ 0.803841] Console: switching to colour frame buffer device 240x67
[ 0.824881] fb0: VESA VGA frame buffer device
[ 0.824906] GHES: HEST is not enabled!
[ 0.824976] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.845555] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.866408] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.866594] Linux agpgart interface v0.103
[ 0.866629] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.866990] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.867005] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.867108] mousedev: PS/2 mouse device common for all mice
[ 0.867134] rtc_cmos 00:02: RTC can wake from S4
[ 0.867262] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.867284] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.867289] cpuidle: using governor ladder
[ 0.867291] cpuidle: using governor menu
[ 0.867406] drop_monitor: Initializing network drop monitor service
[ 0.867460] TCP: cubic registered
[ 0.867524] NET: Registered protocol family 10
[ 0.867628] NET: Registered protocol family 17
[ 0.867635] Key type dns_resolver registered
[ 0.867897] PM: Checking hibernation image partition /dev/sda6
[ 0.867900] PM: Hibernation image not present or could not be loaded.
[ 0.867907] registered taskstats version 1
[ 0.868557] rtc_cmos 00:02: setting system clock to 2012-12-05 06:04:42 UTC (1354687482)
[ 0.869382] Freeing unused kernel memory: 772k freed
[ 0.869544] Write protecting the kernel read-only data: 8192k
[ 0.872682] Freeing unused kernel memory: 1408k freed
[ 0.874248] Freeing unused kernel memory: 568k freed
[ 0.882124] systemd-udevd[48]: starting version 196
[ 0.884645] [drm] Initialized drm 1.1.0 20060810
[ 0.889084] [drm] radeon defaulting to kernel modesetting.
[ 0.889088] [drm] radeon kernel modesetting enabled.
[ 0.889166] checking generic (d0000000 7f0000) vs hw (d0000000 10000000)
[ 0.889170] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[ 0.889188] Console: switching to colour dummy device 80x25
[ 0.889525] [drm] initializing kernel modesetting (VERDE 0x1002:0x683D 0x1787:0x201C).
[ 0.889562] [drm] register mmio base: 0xFEAC0000
[ 0.889563] [drm] register mmio size: 262144
[ 0.890235] ATOM BIOS: VERDE
[ 0.890258] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 0.890260] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[ 0.890499] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 0.890502] [drm] RAM width 128bits DDR
[ 0.890578] [TTM] Zone kernel: Available graphics memory: 4090978 kiB
[ 0.890579] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 0.890580] [TTM] Initializing pool allocator
[ 0.890583] [TTM] Initializing DMA pool allocator
[ 0.890606] [drm] radeon: 1024M of VRAM memory ready
[ 0.890607] [drm] radeon: 512M of GTT memory ready.
[ 0.890619] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.890620] [drm] Driver supports precise vblank timestamp query.
[ 0.890654] radeon 0000:01:00.0: irq 42 for MSI/MSI-X
[ 0.890661] radeon 0000:01:00.0: radeon: using MSI.
[ 0.890682] [drm] radeon: irq initialized.
[ 0.890686] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 0.891680] [drm] Loading VERDE Microcode
[ 1.257750] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 1.257841] radeon 0000:01:00.0: WB enabled
[ 1.257844] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880222b5ec00
[ 1.257846] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff880222b5ec04
[ 1.257847] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff880222b5ec08
[ 1.276350] [drm] ring test on 0 succeeded in 1 usecs
[ 1.276354] [drm] ring test on 1 succeeded in 1 usecs
[ 1.276358] [drm] ring test on 2 succeeded in 1 usecs
[ 1.282858] [drm] ib test on ring 0 succeeded in 0 usecs
[ 1.282901] [drm] ib test on ring 1 succeeded in 0 usecs
[ 1.282938] [drm] ib test on ring 2 succeeded in 0 usecs
[ 1.283686] [drm] Radeon Display Connectors
[ 1.283687] [drm] Connector 0:
[ 1.283688] [drm] DP-1
[ 1.283689] [drm] HPD2
[ 1.283691] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 1.283691] [drm] Encoders:
[ 1.283692] [drm] DFP1: INTERNAL_UNIPHY2
[ 1.283693] [drm] Connector 1:
[ 1.283693] [drm] DP-2
[ 1.283694] [drm] HPD3
[ 1.283695] [drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c
[ 1.283696] [drm] Encoders:
[ 1.283697] [drm] DFP2: INTERNAL_UNIPHY2
[ 1.283697] [drm] Connector 2:
[ 1.283698] [drm] HDMI-A-1
[ 1.283699] [drm] HPD1
[ 1.283700] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 1.283700] [drm] Encoders:
[ 1.283701] [drm] DFP3: INTERNAL_UNIPHY1
[ 1.283702] [drm] Connector 3:
[ 1.283702] [drm] DVI-I-1
[ 1.283703] [drm] HPD4
[ 1.283704] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[ 1.283704] [drm] Encoders:
[ 1.283705] [drm] DFP4: INTERNAL_UNIPHY
[ 1.283706] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 1.283755] [drm] Internal thermal controller with fan control
[ 1.283797] [drm] radeon: power management initialized
[ 1.331226] [drm] fb mappable at 0xD1143000
[ 1.331229] [drm] vram apper at 0xD0000000
[ 1.331229] [drm] size 8294400
[ 1.331230] [drm] fb depth is 24
[ 1.331231] [drm] pitch is 7680
[ 1.331318] fbcon: radeondrmfb (fb0) is primary device
[ 1.346802] Console: switching to colour frame buffer device 240x67
[ 1.352720] fb0: radeondrmfb frame buffer device
[ 1.352721] drm: registered panic notifier
[ 1.352725] [drm] Initialized radeon 2.24.0 20080528 for 0000:01:00.0 on minor 0
[ 1.375410] SCSI subsystem initialized
[ 1.377255] ACPI: bus type usb registered
[ 1.377282] usbcore: registered new interface driver usbfs
[ 1.377319] usbcore: registered new interface driver hub
[ 1.378320] usbcore: registered new device driver usb
[ 1.379984] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.380053] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.380064] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.380075] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.380102] ehci_hcd 0000:00:12.2: debug port 1
[ 1.380123] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe9ff000
[ 1.380154] ACPI: bus type scsi registered
[ 1.380213] libata version 3.00 loaded.
[ 1.388514] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.388661] hub 1-0:1.0: USB hub found
[ 1.388664] hub 1-0:1.0: 6 ports detected
[ 1.388797] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.388802] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.388806] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.388834] ehci_hcd 0000:00:13.2: debug port 1
[ 1.388855] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe9fa800
[ 1.398500] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.398656] hub 2-0:1.0: USB hub found
[ 1.398659] hub 2-0:1.0: 6 ports detected
[ 1.398746] ahci 0000:00:11.0: version 3.0
[ 1.398828] ahci 0000:00:11.0: irq 43 for MSI/MSI-X
[ 1.398909] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.398911] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.399083] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.399512] scsi0 : ahci
[ 1.399610] scsi1 : ahci
[ 1.399654] scsi2 : ahci
[ 1.399696] scsi3 : ahci
[ 1.399728] ata1: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ff900 irq 43
[ 1.399732] ata2: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ff980 irq 43
[ 1.399735] ata3: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ffa00 irq 43
[ 1.399737] ata4: SATA max UDMA/133 abar m1024@0xfe9ff800 port 0xfe9ffa80 irq 43
[ 1.399854] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 1.400149] scsi4 : pata_atiixp
[ 1.400455] scsi5 : pata_atiixp
[ 1.400638] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.400639] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.400728] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.400735] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.400759] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe9fe000
[ 1.455951] hub 3-0:1.0: USB hub found
[ 1.455959] hub 3-0:1.0: 3 ports detected
[ 1.456074] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 1.456079] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.456094] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe9fd000
[ 1.512562] hub 4-0:1.0: USB hub found
[ 1.512569] hub 4-0:1.0: 3 ports detected
[ 1.512679] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.512684] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.512711] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe9fc000
[ 1.569169] hub 5-0:1.0: USB hub found
[ 1.569176] hub 5-0:1.0: 3 ports detected
[ 1.569277] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.569282] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.569302] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe9fb000
[ 1.625801] hub 6-0:1.0: USB hub found
[ 1.625808] hub 6-0:1.0: 3 ports detected
[ 1.625907] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.625913] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.625935] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe9f9000
[ 1.682426] hub 7-0:1.0: USB hub found
[ 1.682433] hub 7-0:1.0: 2 ports detected
[ 1.718239] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.718349] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.771489] tsc: Refined TSC clocksource calibration: 3300.185 MHz
[ 1.771500] Switching to clocksource tsc
[ 1.884730] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.884764] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.885647] ata1.00: ATA-8: Hitachi HDS721050CLA362, JP2OA3MA, max UDMA/133
[ 1.885651] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.886648] ata1.00: configured for UDMA/133
[ 1.886842] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72105 JP2O PQ: 0 ANSI: 5
[ 1.887755] ata4.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN03, max UDMA/100
[ 1.891575] ata4.00: configured for UDMA/100
[ 1.900118] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN03 PQ: 0 ANSI: 5
[ 1.904493] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.904521] sd 0:0:0:0: [sda] Write Protect is off
[ 1.904524] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.904574] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.960469] sda: sda1 sda2 < sda5 sda6 >
[ 1.961148] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.970258] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.970262] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.970468] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.304203] Btrfs loaded
[ 2.341155] device label root devid 1 transid 4703 /dev/sda1
[ 2.356296] device label home devid 1 transid 12756 /dev/sda5
[ 2.358335] PM: Starting manual resume from disk
[ 2.358338] PM: Hibernation image partition 8:6 present
[ 2.358339] PM: Looking for hibernation image.
[ 2.361170] PM: Image not found (code -22)
[ 2.361173] PM: Hibernation image not present or could not be loaded.
[ 2.410897] usb 3-1: new low-speed USB device number 2 using ohci_hcd
[ 2.443887] device label root devid 1 transid 4703 /dev/sda1
[ 2.444603] btrfs: disk space caching is enabled
[ 2.624746] usbcore: registered new interface driver usbhid
[ 2.624749] usbhid: USB HID core driver
[ 2.840498] usb 3-2: new low-speed USB device number 3 using ohci_hcd
[ 3.209064] systemd[1]: systemd 196 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
[ 3.220241] systemd[1]: Set hostname to <username-pc>.
[ 3.310066] usb 4-1: new full-speed USB device number 2 using ohci_hcd
[ 3.349360] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.349401] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.349413] systemd[1]: Starting Remote File Systems.
[ 3.349422] systemd[1]: Reached target Remote File Systems.
[ 3.349428] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.349446] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.349452] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.349471] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.349521] systemd[1]: Starting udev Kernel Socket.
[ 3.349536] systemd[1]: Listening on udev Kernel Socket.
[ 3.349568] systemd[1]: Starting udev Control Socket.
[ 3.349583] systemd[1]: Listening on udev Control Socket.
[ 3.349607] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.349685] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.349694] systemd[1]: Starting Encrypted Volumes.
[ 3.349700] systemd[1]: Reached target Encrypted Volumes.
[ 3.349708] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.349732] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.349739] systemd[1]: Expecting device dev-sda6.device...
[ 3.349748] systemd[1]: Expecting device dev-disk-by\x2dlabel-home.device...
[ 3.349759] systemd[1]: Starting Journal Socket.
[ 3.349793] systemd[1]: Listening on Journal Socket.
[ 3.349813] systemd[1]: Starting File System Check on Root Device...
[ 3.383483] systemd[1]: Mounting Temporary Directory...
[ 3.386982] systemd[1]: Mounting Huge Pages File System...
[ 3.396992] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.411780] systemd[1]: Starting udev Coldplug all Devices...
[ 3.473293] systemd[1]: Started Load Kernel Modules.
[ 3.473319] systemd[1]: Mounted Configuration File System.
[ 3.473331] systemd[1]: Mounting Debug File System...
[ 3.503316] systemd[1]: Starting Setup Virtual Console...
[ 3.635877] systemd[1]: Starting Apply Kernel Variables...
[ 3.644380] systemd[1]: Mounted FUSE Control File System.
[ 3.681773] systemd[1]: Starting Set Up Additional Binary Formats...
[ 3.693922] systemd[1]: Starting udev Kernel Device Manager...
[ 3.699903] systemd[1]: Starting Journal Service...
[ 3.726363] usb 5-2: new low-speed USB device number 2 using ohci_hcd
[ 3.729870] systemd[1]: Started Journal Service.
[ 3.733092] systemd[1]: Started File System Check on Root Device.
[ 3.733146] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.987619] systemd-udevd[148]: starting version 196
[ 4.264369] btrfs: disk space caching is enabled
[ 4.652532] microcode: CPU0: patch_level=0x010000c8
[ 4.721684] microcode: CPU1: patch_level=0x010000c8
[ 4.722492] microcode: CPU2: patch_level=0x010000c8
[ 4.723342] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 4.805102] input: PC Speaker as /devices/platform/pcspkr/input/input0
[ 4.833306] MCE: In-kernel MCE decoding enabled.
[ 4.837493] EDAC MC: Ver: 3.0.0
[ 4.884222] kvm: Nested Virtualization enabled
[ 4.884225] kvm: Nested Paging enabled
[ 4.975464] AMD64 EDAC driver v3.4.0
[ 4.975512] EDAC amd64: DRAM ECC disabled.
[ 4.975521] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 4.994606] hda_intel: position_fix set to 1 for device 1565:8218
[ 5.059919] wmi: Mapper loaded
[ 5.146045] input: USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input1
[ 5.146119] hid-generic 0003:09DA:0260.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:12.0-1/input0
[ 5.151317] input: USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/input/input2
[ 5.151391] hid-generic 0003:09DA:0260.0002: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:12.0-1/input1
[ 5.151541] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input3
[ 5.151631] hid-generic 0003:046D:C046.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-2/input0
[ 5.151893] input: USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/input/input4
[ 5.152017] hid-generic 0003:04D9:1603.0004: input,hidraw3: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:13.0-2/input0
[ 5.156603] input: USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.1/input/input5
[ 5.156676] hid-generic 0003:04D9:1603.0005: input,hidraw4: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:13.0-2/input1
[ 5.181052] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
[ 5.181058] ACPI: Power Button [PWRB]
[ 5.181100] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 5.181102] ACPI: Power Button [PWRF]
[ 5.299174] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 5.299265] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 5.299326] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 5.299371] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 5.299433] input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 5.299646] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20120711/utaddress-251)
[ 5.299650] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.299677] hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
[ 5.299681] hda-intel: Force to non-snoop mode
[ 5.299770] snd_hda_intel 0000:01:00.1: irq 44 for MSI/MSI-X
[ 5.320936] usbcore: registered new interface driver snd-usb-audio
[ 5.330947] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.330950] ACPI: Thermal Zone [THRM] (22 C)
[ 5.351444] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 5.351672] r8169 0000:02:00.0: irq 45 for MSI/MSI-X
[ 5.351849] r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc900115b4000, 00:30:67:80:09:98, XID 081000c0 IRQ 45
[ 5.351851] r8169 0000:02:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 5.417961] sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01
[ 5.418019] sp5100_tco: mmio address 0xfec000f0 already in use
[ 5.526015] powernow-k8: Found 1 AMD Athlon(tm) II X3 455 Processor (3 cpu cores) (version 2.20.00)
[ 5.526050] powernow-k8: 0 : pstate 0 (3300 MHz)
[ 5.526051] powernow-k8: 1 : pstate 1 (2600 MHz)
[ 5.526051] powernow-k8: 2 : pstate 2 (2100 MHz)
[ 5.526052] powernow-k8: 3 : pstate 3 (800 MHz)
[ 5.694182] device label root devid 1 transid 4703 /dev/sda1
[ 5.798696] device label home devid 1 transid 12756 /dev/sda5
[ 5.931970] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input13
[ 5.932214] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input14
[ 5.932423] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input15
[ 5.932691] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input16
[ 5.932965] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input17
[ 5.933246] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input18
[ 6.074578] Adding 7915516k swap on /dev/sda6. Priority:-1 extents:1 across:7915516k
[ 6.286004] device label home devid 1 transid 12756 /dev/sda5
[ 6.287343] btrfs: disk space caching is enabled
[ 6.519896] systemd-journald[149]: Received SIGUSR1
[ 7.652509] systemd-logind[297]: Watching system buttons on /dev/input/event7 (Power Button)
[ 7.652767] systemd-logind[297]: Watching system buttons on /dev/input/event6 (Power Button)
[ 10.558059] r8169 0000:02:00.0: eth0: link down
[ 10.558088] r8169 0000:02:00.0: eth0: link down
[ 10.558121] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.703110] r8169 0000:02:00.0: eth0: link up
[ 12.703129] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 13.436001] sit: IPv6 over IPv4 tunneling driver
[ 23.465586] systemd-logind[297]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
Xorg log
[ 10.659]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 10.659] X Protocol Version 11, Revision 0
[ 10.659] Build Operating System: Linux 3.6.3-1-ARCH x86_64
[ 10.659] Current Operating System: Linux username-pc 3.6.8-1-ARCH #1 SMP PREEMPT Mon Nov 26 22:10:40 CET 2012 x86_64
[ 10.659] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=6820a5fc-5e11-4854-929c-62edccd80ff8 resume=/dev/sda6 ro quiet
[ 10.659] Build Date: 08 November 2012 07:09:29PM
[ 10.659]
[ 10.659] Current version of pixman: 0.28.0
[ 10.660] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 10.660] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 10.660] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Dec 5 08:04:52 2012
[ 10.698] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 10.704] (==) No Layout section. Using the first Screen section.
[ 10.704] (==) No screen section available. Using defaults.
[ 10.704] (**) |-->Screen "Default Screen Section" (0)
[ 10.704] (**) | |-->Monitor "<default monitor>"
[ 10.705] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 10.705] (==) Automatically adding devices
[ 10.705] (==) Automatically enabling devices
[ 10.705] (==) Automatically adding GPU devices
[ 10.902] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 10.902] Entry deleted from font path.
[ 10.903] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 10.903] Entry deleted from font path.
[ 10.903] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 10.904] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 10.904] Entry deleted from font path.
[ 10.904] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 10.904] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/
[ 10.904] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 10.904] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 10.904] (II) Loader magic: 0x7fcc40
[ 10.904] (II) Module ABI versions:
[ 10.904] X.Org ANSI C Emulation: 0.4
[ 10.904] X.Org Video Driver: 13.1
[ 10.904] X.Org XInput driver : 18.0
[ 10.904] X.Org Server Extension : 7.0
[ 10.905] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 10.908] (--) PCI:*(0:1:0:0) 1002:683d:1787:201c rev 0, Mem @ 0xd0000000/268435456, 0xfeac0000/262144, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[ 10.908] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 10.908] Initializing built-in extension Generic Event Extension
[ 10.908] Initializing built-in extension SHAPE
[ 10.908] Initializing built-in extension MIT-SHM
[ 10.908] Initializing built-in extension XInputExtension
[ 10.908] Initializing built-in extension XTEST
[ 10.908] Initializing built-in extension BIG-REQUESTS
[ 10.908] Initializing built-in extension SYNC
[ 10.908] Initializing built-in extension XKEYBOARD
[ 10.908] Initializing built-in extension XC-MISC
[ 10.908] Initializing built-in extension SECURITY
[ 10.908] Initializing built-in extension XINERAMA
[ 10.908] Initializing built-in extension XFIXES
[ 10.908] Initializing built-in extension RENDER
[ 10.908] Initializing built-in extension RANDR
[ 10.908] Initializing built-in extension COMPOSITE
[ 10.908] Initializing built-in extension DAMAGE
[ 10.908] Initializing built-in extension MIT-SCREEN-SAVER
[ 10.908] Initializing built-in extension DOUBLE-BUFFER
[ 10.908] Initializing built-in extension RECORD
[ 10.908] Initializing built-in extension DPMS
[ 10.908] Initializing built-in extension X-Resource
[ 10.908] Initializing built-in extension XVideo
[ 10.908] Initializing built-in extension XVideo-MotionCompensation
[ 10.908] Initializing built-in extension XFree86-VidModeExtension
[ 10.908] Initializing built-in extension XFree86-DGA
[ 10.908] Initializing built-in extension XFree86-DRI
[ 10.908] Initializing built-in extension DRI2
[ 10.908] (II) LoadModule: "glx"
[ 10.923] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 10.938] (II) Module glx: vendor="X.Org Foundation"
[ 10.938] compiled for 1.13.0, module version = 1.0.0
[ 10.938] ABI class: X.Org Server Extension, version 7.0
[ 10.938] (==) AIGLX enabled
[ 10.938] Loading extension GLX
[ 10.938] (==) Matched ati as autoconfigured driver 0
[ 10.938] (==) Matched ati as autoconfigured driver 1
[ 10.938] (==) Matched vesa as autoconfigured driver 2
[ 10.938] (==) Matched modesetting as autoconfigured driver 3
[ 10.938] (==) Matched fbdev as autoconfigured driver 4
[ 10.938] (==) Assigned the driver to the xf86ConfigLayout
[ 10.938] (II) LoadModule: "ati"
[ 10.950] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 10.963] (II) Module ati: vendor="X.Org Foundation"
[ 10.963] compiled for 1.13.0, module version = 7.0.0
[ 10.963] Module class: X.Org Video Driver
[ 10.963] ABI class: X.Org Video Driver, version 13.0
[ 10.963] (II) LoadModule: "radeon"
[ 10.963] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 11.114] (II) Module radeon: vendor="X.Org Foundation"
[ 11.114] compiled for 1.13.0, module version = 7.0.0
[ 11.114] Module class: X.Org Video Driver
[ 11.114] ABI class: X.Org Video Driver, version 13.0
[ 11.114] (II) LoadModule: "vesa"
[ 11.132] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 11.138] (II) Module vesa: vendor="X.Org Foundation"
[ 11.139] compiled for 1.13.0, module version = 2.3.2
[ 11.139] Module class: X.Org Video Driver
[ 11.139] ABI class: X.Org Video Driver, version 13.0
[ 11.139] (II) LoadModule: "modesetting"
[ 11.139] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 11.149] (II) Module modesetting: vendor="X.Org Foundation"
[ 11.149] compiled for 1.13.0, module version = 0.5.0
[ 11.149] Module class: X.Org Video Driver
[ 11.149] ABI class: X.Org Video Driver, version 13.0
[ 11.149] (II) LoadModule: "fbdev"
[ 11.162] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 11.163] (II) Module fbdev: vendor="X.Org Foundation"
[ 11.164] compiled for 1.13.0, module version = 0.4.3
[ 11.164] Module class: X.Org Video Driver
[ 11.164] ABI class: X.Org Video Driver, version 13.0
[ 11.164] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATISame issue with my HD6670. I didn't notice until I installed Steam and it was unusable. Since you have a 7000 series card, try this: https://bbs.archlinux.org/viewtopic.php?pid=1250981
EDIT: I just noticed how old this thread was.
Last edited by nadman10 (2013-04-06 19:11:40) -
Problem with recognising radeon 6490M graphics card on Pavilion dv6-6176sa
So,
My laptop was having some issues recently with the graphics, it basically wouldn't recognise either the intel or the radeon graphics card. I tried updating all drivers under the sun but nothing worked. In the end I formatted my computer and reinstalled windows, did all necessary updates windows and HP ones. Now my laptop would recognise both the intel and radeon in device manager but my computer was constantly using the intel card, I read up a bit and figured this would be due to an issue with the switchable graphics.
I did the bios and drivers updates and changed switchable graphics to fixed mode, this seemed to do the trick and my laptop ran like it should be for a few days. This morning I start watching some of my shows and then my screen freezes and it starts making a bunch of noise (similar to what it was doing pre-factory reset). Oh dear, I turn it off, and leave it off for a bit figuring maybe it had overheated. I turn it on again, now device manager wont show the radeon card and AMD catalyst produces a warning message saying that there is no AMD driver compatible with the CCC (well it was just fine yesterday, no updates, program installations or anything run since then)
I'm now wondering whether there may just be a hardware issue and that it's time to pack in my laptop or if this could still be a driver issue.@Piids
Download and install the most current AMD graphics softpaq.
You can get it from the download section of your notebook's web support portal.
Do not install the Intel graphics driver softpaq seperately. Doing that will remove the switchable graphics feature.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
Mobility Radeon 7500 OpenGL issues
Whenever I attempt to use anything involving openGL, my CPU usage hits 100%. Complex openGL programs will drop to a framerate of less than 10, and sometimes crash Xorg. How can I fix this?
General system info:
lspci
00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge (rev 04)
00:01.0 PCI bridge: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801CA/CAM USB Controller #3 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 02)
00:1f.6 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]
02:00.0 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus Controller (rev 01)
02:00.1 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus Controller (rev 01)
02:02.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
02:08.0 Ethernet controller: Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 42)
lsmod
Module Size Used by
ipv6 279604 16
oss_usb 106284 2
oss_ich 18832 4
osscore 552820 4 oss_usb,oss_ich
ext2 68964 1
fan 4448 0
fuse 64856 2
arc4 1756 2
ecb 2812 2
b43 137208 0
radeon 666112 2
ttm 37164 1 radeon
joydev 10528 0
drm 156160 4 radeon,ttm
i2c_algo_bit 5888 1 radeon
e100 34308 0
ssb 45988 1 b43
ppdev 7008 0
yenta_socket 25384 2
rsrc_nonstatic 12316 1 yenta_socket
mii 4892 1 e100
thinkpad_acpi 67988 0
battery 10816 0
nvram 6984 1 thinkpad_acpi
video 20116 0
output 2908 1 video
pcmcia 36168 2 b43,ssb
parport_pc 37060 1
irtty_sir 5564 0
sir_dev 11712 1 irtty_sir
psmouse 60084 0
ac 4224 0
processor 36076 1
iTCO_wdt 11072 0
iTCO_vendor_support 3136 1 iTCO_wdt
mac80211 155788 1 b43
irda 126744 1 sir_dev
crc_ccitt 1724 1 irda
thermal 13912 0
uhci_hcd 23692 0
button 5612 0
ehci_hcd 36620 0
serio_raw 5792 0
shpchp 34384 0
intel_agp 28604 1
lp 9732 0
parport 34412 3 ppdev,parport_pc,lp
evdev 10240 15
cfg80211 90364 2 b43,mac80211
pci_hotplug 28732 1 shpchp
pcspkr 2492 0
i2c_i801 9616 0
i2c_core 21808 4 radeon,drm,i2c_algo_bit,i2c_i801
rfkill 19696 2 thinkpad_acpi,cfg80211
sg 27728 0
agpgart 32660 3 ttm,drm,intel_agp
led_class 4000 2 b43,thinkpad_acpi
usbcore 154032 5 oss_usb,uhci_hcd,ehci_hcd
pcmcia_core 35920 5 b43,ssb,yenta_socket,rsrc_nonstatic,pcmcia
rtc_cmos 11344 0
rtc_core 17976 1 rtc_cmos
rtc_lib 2524 1 rtc_core
ext4 334112 2
mbcache 7104 2 ext2,ext4
jbd2 82016 1 ext4
crc16 1660 1 ext4
sr_mod 16644 0
cdrom 36032 1 sr_mod
sd_mod 28344 5
pata_acpi 4252 0
ata_piix 23268 4
ata_generic 4704 0
libata 169548 3 pata_acpi,ata_piix,ata_generic
floppy 56356 0
scsi_mod 112468 4 sg,sr_mod,sd_mod,libata
dmesg
Linux version 2.6.31-ARCH (root@architect) (gcc version 4.4.2 (GCC) ) #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ff70000 (usable)
BIOS-e820: 000000003ff70000 - 000000003ff7e000 (ACPI data)
BIOS-e820: 000000003ff7e000 - 000000003ff80000 (ACPI NVS)
BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
DMI present.
last_pfn = 0x3ff70 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DBFFF uncachable
DC000-DFFFF write-back
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FC0000000 write-back
1 base 03FF80000 mask FFFF80000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000002000 (usable)
modified: 0000000000002000 - 0000000000006000 (reserved)
modified: 0000000000006000 - 000000000009f000 (usable)
modified: 000000000009f000 - 00000000000a0000 (reserved)
modified: 00000000000dc000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000003ff70000 (usable)
modified: 000000003ff70000 - 000000003ff7e000 (ACPI data)
modified: 000000003ff7e000 - 000000003ff80000 (ACPI NVS)
modified: 000000003ff80000 - 0000000040000000 (reserved)
modified: 00000000ff800000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 7000-c000
RAMDISK: 3fea7000 - 3ff5fb2e
Allocated new RAMDISK: 00100000 - 001b8b2e
Move RAMDISK from 000000003fea7000 - 000000003ff5fb2d to 00100000 - 001b8b2d
ACPI: RSDP 000f7010 00024 (v02 IBM )
ACPI: XSDT 3ff731cd 0004C (v01 IBM TP-1I 00002080 LTP 00000000)
ACPI: FACP 3ff73300 00081 (v01 IBM TP-1I 00002080 IBM 00000001)
ACPI: DSDT 3ff733e7 0AAD5 (v01 IBM TP-1I 00002080 MSFT 0100000D)
ACPI: FACS 3ff7f000 00040
ACPI: SSDT 3ff733b4 00033 (v01 IBM TP-1I 00002080 MSFT 0100000D)
ACPI: ECDT 3ff7debc 00052 (v01 IBM TP-1I 00002080 IBM 00000001)
ACPI: TCPA 3ff7df0e 00032 (v01 IBM TP-1I 00002080 PTL 00000001)
ACPI: BOOT 3ff7dfd8 00028 (v01 IBM TP-1I 00002080 LTP 00000001)
135MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
node 0 low ram: 00000000 - 377fe000
node 0 bootmap 00008000 - 0000ef00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0001000000 - 000156da44] TEXT DATA BSS ==> [0001000000 - 000156da44]
#4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#5 [000156e000 - 0001574128] BRK ==> [000156e000 - 0001574128]
#6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
#7 [0000100000 - 00001b8b2e] NEW RAMDISK ==> [0000100000 - 00001b8b2e]
#8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0003ff70
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000000 -> 0x00000002
0: 0x00000006 -> 0x0000009f
0: 0x00000100 -> 0x0003ff70
On node 0 totalpages: 261899
free_area_init_node: node 0, pgdat c141b740, node_mem_map c1575000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3963 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 271 pages used for memmap
HighMem zone: 34403 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Local APIC disabled by BIOS -- you can enable it with "lapic"
APIC: disable apic facility
nr_irqs_gsi: 16
PM: Registered nosave memory: 0000000000002000 - 0000000000006000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 40000000:bf800000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 14 pages at c1d7a000, static data 34332 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259852
Kernel command line: root=/dev/disk/by-uuid/ce79e597-2b00-4812-95b4-eda62758ab6c ro vga=792 nomodeset
PID hash table entries: 4096 (order: 12, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (000377fe:0003ff70)
Memory: 1031828k/1048000k available (3111k kernel code, 15416k reserved, 1120k data, 416k init, 138696k highmem)
virtual kernel memory layout:
fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1422000 - 0xc148a000 ( 416 kB)
.data : 0xc1309ddd - 0xc1421ea8 (1120 kB)
.text : 0xc1000000 - 0xc1309ddd (3111 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:512
Fast TSC calibration using PIT
Detected 2192.708 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 4387.14 BogoMIPS (lpj=7309026)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
mce: CPU supports 4 MCE banks
------------[ cut here ]------------
WARNING: at arch/x86/kernel/apic/apic.c:247 native_apic_write_dummy+0x4b/0x60()
Hardware name: 236686U
Modules linked in:
Pid: 0, comm: swapper Not tainted 2.6.31-ARCH #1
Call Trace:
[<c10464da>] ? warn_slowpath_common+0x7a/0xc0
[<c101f2ab>] ? native_apic_write_dummy+0x4b/0x60
[<c1046540>] ? warn_slowpath_null+0x20/0x40
[<c101f2ab>] ? native_apic_write_dummy+0x4b/0x60
[<c1016601>] ? intel_init_thermal+0xd1/0x1d0
[<c10149c3>] ? mce_init+0xc3/0xf0
[<c10ed693>] ? __kmalloc+0x93/0x210
[<c1015bc5>] ? mce_intel_feature_init+0x15/0x70
[<c13014ed>] ? mcheck_init+0x261/0x2b5
[<c12ff55a>] ? identify_cpu+0x377/0x386
[<c10ecabf>] ? kmem_cache_alloc+0x6f/0x170
[<c1429dc9>] ? identify_boot_cpu+0xa/0x1e
[<c1429f90>] ? check_bugs+0x14/0x108
[<c109add0>] ? __delayacct_tsk_init+0x20/0x50
[<c1422a31>] ? start_kernel+0x332/0x353
[<c14224f0>] ? unknown_bootoption+0x0/0x1bd
---[ end trace a7919e7f17c0a725 ]---
CPU0: Thermal monitoring enabled (TM1)
Performance Counters: no PMU driver, software counters only.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 11k freed
ACPI: Core revision 20090521
ACPI: setting ELCR to 0200 (from 0800)
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (4387.14 BogoMIPS).
CPU0 attaching NULL sched-domain.
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd8fe, last bus=8
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: EC description table is found, configuring boot EC
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: Power Resource [PUBS] (on)
ACPI: ACPI Dock Station Driver: 3 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe3ffffff]
pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f]
pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f]
pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f]
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
pci 0000:00:1f.1: reg 20 io port: [0x1860-0x186f]
pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f]
pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff]
pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff]
pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff]
pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f]
pci 0000:01:00.0: reg 10 32bit mmio: [0xe8000000-0xefffffff]
pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff]
pci 0000:01:00.0: reg 18 32bit mmio: [0xd0100000-0xd010ffff]
pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: bridge io port: [0x3000-0x3fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xd0100000-0xd01fffff]
pci 0000:00:01.0: bridge 32bit mmio pref: [0xe8000000-0xefffffff]
pci 0000:02:00.0: reg 10 32bit mmio: [0x50000000-0x50000fff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.1: reg 10 32bit mmio: [0x51000000-0x51000fff]
pci 0000:02:00.1: supports D1 D2
pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.1: PME# disabled
pci 0000:02:02.0: reg 10 32bit mmio: [0xd0200000-0xd0201fff]
pci 0000:02:08.0: reg 10 32bit mmio: [0xd0202000-0xd0202fff]
pci 0000:02:08.0: reg 14 io port: [0x8000-0x803f]
pci 0000:02:08.0: supports D1 D2
pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:08.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0x4000-0x8fff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xd0200000-0xdfffffff]
pci 0000:00:1e.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
system 00:00: iomem range 0xc8000-0xcbfff could not be reserved
system 00:00: iomem range 0xcc000-0xcffff could not be reserved
system 00:00: iomem range 0xdc000-0xdffff could not be reserved
system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
system 00:00: iomem range 0xe8000-0xebfff could not be reserved
system 00:00: iomem range 0xec000-0xeffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x3fffffff could not be reserved
system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved
system 00:02: ioport range 0x1000-0x107f has been reserved
system 00:02: ioport range 0x1180-0x11bf has been reserved
system 00:02: ioport range 0x15e0-0x15ef has been reserved
system 00:02: ioport range 0x1600-0x167f has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x3000-0x3fff
pci 0000:00:01.0: MEM window: 0xd0100000-0xd01fffff
pci 0000:00:01.0: PREFETCH window: 0xe8000000-0xefffffff
pci 0000:02:00.0: CardBus bridge, secondary bus 0000:03
pci 0000:02:00.0: IO window: 0x004000-0x0040ff
pci 0000:02:00.0: IO window: 0x004400-0x0044ff
pci 0000:02:00.0: PREFETCH window: 0xf0000000-0xf3ffffff
pci 0000:02:00.0: MEM window: 0xd4000000-0xd7ffffff
pci 0000:02:00.1: CardBus bridge, secondary bus 0000:07
pci 0000:02:00.1: IO window: 0x004800-0x0048ff
pci 0000:02:00.1: IO window: 0x004c00-0x004cff
pci 0000:02:00.1: PREFETCH window: 0xf4000000-0xf7ffffff
pci 0000:02:00.1: MEM window: 0xd8000000-0xdbffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1e.0: IO window: 0x4000-0x8fff
pci 0000:00:1e.0: MEM window: 0xd0200000-0xdfffffff
pci 0000:00:1e.0: PREFETCH window: 0xf0000000-0xf7ffffff
pci 0000:00:1e.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
pci 0000:02:00.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:01: resource 1 mem: [0xd0100000-0xd01fffff]
pci_bus 0000:01: resource 2 pref mem [0xe8000000-0xefffffff]
pci_bus 0000:02: resource 0 io: [0x4000-0x8fff]
pci_bus 0000:02: resource 1 mem: [0xd0200000-0xdfffffff]
pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf7ffffff]
pci_bus 0000:02: resource 3 io: [0x00-0xffff]
pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:03: resource 0 io: [0x4000-0x40ff]
pci_bus 0000:03: resource 1 io: [0x4400-0x44ff]
pci_bus 0000:03: resource 2 pref mem [0xf0000000-0xf3ffffff]
pci_bus 0000:03: resource 3 mem: [0xd4000000-0xd7ffffff]
pci_bus 0000:07: resource 0 io: [0x4800-0x48ff]
pci_bus 0000:07: resource 1 io: [0x4c00-0x4cff]
pci_bus 0000:07: resource 2 pref mem [0xf4000000-0xf7ffffff]
pci_bus 0000:07: resource 3 mem: [0xd8000000-0xdbffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 738k freed
Simple Boot Flag at 0x35 set to 0x1
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1259350175.183:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1746
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
vesafb: framebuffer at 0xe8000000, mapped to 0xf8080000, using 4608k, total 16320k
vesafb: mode is 1024x768x24, linelength=3072, pages=6
vesafb: protected mode interface info at c000:5701
vesafb: pmi: set display start = c00c5795, set palette = c00c57e1
vesafb: pmi: ports = 3010 3016 3054 3038 303c 305c 3000 3004 30b0 30b2 30b4
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
serial 0000:00:1f.6: PCI INT B disabled
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Switched to high resolution mode on CPU 0
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 416k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Floppy drive(s): fd0 is 1.44M
SCSI subsystem initialized
FDC 0 is a National Semiconductor PC87306
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
ata1.00: ATA-7: SAMSUNG MP0201H, YP200-06, max UDMA/100
ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4240N, 0211, max UDMA/33
ata1.00: 39179952 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA SAMSUNG MP0201H YP20 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4240N 0211 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 39179952 512-byte logical blocks: (20.0 GB/18.6 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
EXT4-fs (sda3): INFO: recovery required on readonly filesystem
EXT4-fs (sda3): write access will be enabled during recovery
EXT4-fs (sda3): barriers enabled
kjournald2 starting: pid 500, dev sda3:8, commit interval 5 seconds
EXT4-fs (sda3): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (sda3): orphan cleanup on readonly fs
EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 212034
EXT4-fs (sda3): 1 orphan inode deleted
EXT4-fs (sda3): recovery complete
EXT4-fs (sda3): mounted filesystem with ordered data mode
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram
udev: starting version 146
intel_rng: FWH not detected
Linux agpgart interface v0.103
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
input: PC Speaker as /devices/platform/pcspkr/input/input2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
agpgart-intel 0000:00:00.0: Intel 845G Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
lp: driver loaded but no devices found
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (58 C)
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
ACPI: Sleep Button [SLPB]
NET: Registered protocol family 23
usb 2-2: new full speed USB device using uhci_hcd and address 2
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor LNXCPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: AC Adapter [AC] (on-line)
parport_pc 00:0b: reported by Plug and Play ACPI
parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
usb 2-2: configuration #1 chosen from 4 choices
lp0: using parport0 (interrupt-driven).
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
nsc_ircc_open(), can't get iobase of 0x2f8
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
nsc_ircc_open(), can't get iobase of 0x2f8
nsc-ircc 00:0c: disabled
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:03/device:04/input/input6
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
Non-volatile memory driver v1.3
thinkpad_acpi: ThinkPad ACPI Extras v0.23
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 1IET69WW (2.08 ), EC 1IHT20WW-1.07
ACPI: Battery Slot [BAT0] (battery present)
Registered led device: tpacpi::thinklight
Registered led device: tpacpi::power
Registered led device: tpacpi::standby
input: ThinkPad Extra Buttons as /devices/virtual/input/input7
ppdev: user-space parallel port driver
yenta_cardbus 0000:02:00.0: CardBus bridge found [1014:0512]
yenta_cardbus 0000:02:00.0: Using INTVAL to route CSC interrupts to PCI
yenta_cardbus 0000:02:00.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:02:00.0: TI: mfunc 0x01d21022, devctl 0x64
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0
serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
yenta_cardbus 0000:02:00.0: ISA IRQ mask 0x0438, PCI irq 11
yenta_cardbus 0000:02:00.0: Socket status: 30000006
yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x8fff: clean.
yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff
yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
[drm] Initialized drm 1.1.0 20060810
[drm] VGACON disable radeon kernel modesetting.
pci 0000:01:00.0: power state changed by ACPI to D0
pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
e100 0000:02:08.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11
e100 0000:02:08.0: PME# disabled
e100: eth0: e100_probe: addr 0xd0202000, irq 11, MAC addr 00:0d:60:37:df:cb
b43-pci-bridge 0000:02:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
ssb: Sonics Silicon Backplane found on PCI device 0000:02:02.0
yenta_cardbus 0000:02:00.1: CardBus bridge found [1014:0512]
yenta_cardbus 0000:02:00.1: Using INTVAL to route CSC interrupts to PCI
yenta_cardbus 0000:02:00.1: Routing CardBus interrupts to PCI
yenta_cardbus 0000:02:00.1: TI: mfunc 0x01d21022, devctl 0x64
b43-phy0: Broadcom 4318 WLAN found (core revision 9)
phy0: Selected rate control algorithm 'minstrel'
Broadcom 43xx driver loaded [ Features: PML, Firmware-ID: FW13 ]
yenta_cardbus 0000:02:00.1: ISA IRQ mask 0x0438, PCI irq 11
yenta_cardbus 0000:02:00.1: Socket status: 30000006
yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x4000-0x8fff: clean.
yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xdfffffff
yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf7ffffff
fuse init (API version 7.12)
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
psmouse serio2: ID: 10 00 64
EXT4-fs (sda3): internal journal on sda3:8
EXT4-fs (sda4): barriers enabled
kjournald2 starting: pid 2051, dev sda4:8, commit interval 5 seconds
EXT4-fs (sda4): internal journal on sda4:8
EXT4-fs (sda4): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (sda4): mounted filesystem with ordered data mode
Adding 265064k swap on /dev/sda2. Priority:-1 extents:1 across:265064k
usb 2-2: USB disconnect, address 2
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9
Clocksource tsc unstable (delta = -78033180 ns)
oss_ich 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
usbcore: registered new interface driver oss_usb
ttyS1: LSR safety check engaged!
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
agpgart-intel 0000:00:00.0: AGP 2.0 bridge
agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
pci 0000:01:00.0: putting AGP V2 device into 4x mode
[drm] Setting GART location based on new memory map
[drm] Loading R100 Microcode
[drm] writeback test succeeded in 1 usecs
b43 ssb0:0: firmware: requesting b43/ucode5.fw
b43 ssb0:0: firmware: requesting b43/pcm5.fw
b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
Registered led device: b43-phy0::tx
Registered led device: b43-phy0::rx
Registered led device: b43-phy0::radio
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with AP 00:1e:e5:79:4e:41
wlan0: authenticated
wlan0: associate with AP 00:1e:e5:79:4e:41
wlan0: RX AssocResp from 00:1e:e5:79:4e:41 (capab=0x11 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
usb 2-2: new full speed USB device using uhci_hcd and address 3
usb 2-2: configuration #1 chosen from 4 choices
Consoledump from an openGL game:
[nick@myhost nick]# tremulous
tremulous 1.1.0 linux-x86 Mar 17 2009
----- FS_Startup -----
Current search path:
/root/.tremulous/base
/opt/tremulous/base/vms-1.1.0.pk3 (4 files)
/opt/tremulous/base/map-uncreation-1.1.0.pk3 (110 files)
/opt/tremulous/base/map-tremor-1.1.0.pk3 (45 files)
/opt/tremulous/base/map-transit-1.1.0.pk3 (135 files)
/opt/tremulous/base/map-niveus-1.1.0.pk3 (134 files)
/opt/tremulous/base/map-nexus6-1.1.0.pk3 (151 files)
/opt/tremulous/base/map-karith-1.1.0.pk3 (118 files)
/opt/tremulous/base/map-atcs-1.1.0.pk3 (87 files)
/opt/tremulous/base/map-arachnid2-1.1.0.pk3 (67 files)
/opt/tremulous/base/data-1.1.0.pk3 (1229 files)
/opt/tremulous/base
2080 files in pk3 files
execing default.cfg
couldn't exec autogen.cfg
couldn't exec autoexec.cfg
Hunk_Clear: reset the hunk ok
----- Client Initialization -----
----- Initializing Renderer ----
----- Client Initialization Complete -----
----- R_Init -----
------- Input Initialization -------
Joystick is not active.
...loading libGL.so.1:
Calling SDL_Init(SDL_INIT_VIDEO)...
SDL_Init(SDL_INIT_VIDEO) passed.
Initializing OpenGL display
...setting mode 3: 640 480
Using 8/8/8 Color bits, 24 depth, 8 stencil display.
GL_RENDERER: Mesa DRI R100 (RV200 4C57) 20090101 AGP 4x x86/MMX/SSE2 TCL
Initializing OpenGL extensions
...GL_S3_s3tc not found
...ignoring GL_EXT_texture_env_add
...using GL_ARB_multitexture
...using GL_EXT_compiled_vertex_array
GL_VENDOR: Tungsten Graphics, Inc.
GL_RENDERER: Mesa DRI R100 (RV200 4C57) 20090101 AGP 4x x86/MMX/SSE2 TCL
GL_VERSION: 1.3 Mesa 7.6
GL_EXTENSIONS: GL_ARB_draw_buffers GL_ARB_imaging GL_ARB_multisample GL_ARB_multitexture GL_ARB_texture_border_clamp GL_ARB_texture_compression GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_mirrored_repeat GL_ARB_texture_rectangle GL_ARB_transpose_matrix GL_ARB_vertex_buffer_object GL_ARB_window_pos GL_EXT_abgr GL_EXT_bgra GL_EXT_blend_color GL_EXT_blend_logic_op GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_compiled_vertex_array GL_EXT_convolution GL_EXT_copy_texture GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_histogram GL_EXT_multi_draw_arrays GL_EXT_packed_depth_stencil GL_EXT_packed_pixels GL_EXT_polygon_offset GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_specular_color GL_EXT_stencil_wrap GL_EXT_subtexture GL_EXT_texture GL_EXT_texture3D GL_EXT_texture_edge_clamp GL_EXT_texture_env_add GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_lod_bias GL_EXT_texture_mirror_clamp GL_EXT_texture_object GL_EXT_texture_rectangle GL_EXT_vertex_array GL_APPLE_packed_pixels GL_ATI_texture_env_combine3 GL_ATI_texture_mirror_once GL_IBM_multimode_draw_arrays GL_IBM_rasterpos_clip GL_IBM_texture_mirrored_repeat GL_MESA_ycbcr_texture GL_MESA_window_pos GL_NV_blend_square GL_NV_light_max_exponent GL_NV_texture_rectangle GL_NV_texgen_reflection GL_OES_read_format GL_SGI_color_matrix GL_SGI_color_table GL_SGIS_generate_mipmap GL_SGIS_texture_border_clamp GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod GL_SUN_multi_draw_arrays
GL_MAX_TEXTURE_SIZE: 2048
GL_MAX_ACTIVE_TEXTURES_ARB: 3
PIXELFORMAT: color(24-bits) Z(24-bit) stencil(8-bits)
MODE: 3, 640 x 480 fullscreen hz:N/A
GAMMA: hardware w/ 0 overbright bits
CPU:
rendering primitives: single glDrawElements
texturemode: GL_LINEAR_MIPMAP_LINEAR
picmip: 0
texture bits: 0
multitexture: enabled
compiled vertex arrays: enabled
texenv add: disabled
compressed textures: disabled
Initializing Shaders
...loading 'scripts/uncreation.shader'
...loading 'scripts/q3map2_tremor.shader'
...loading 'scripts/tremor.shader'
...loading 'scripts/transit.shader'
...loading 'scripts/niveus.shader'
...loading 'scripts/nexus6.shader'
...loading 'scripts/karith.shader'
...loading 'scripts/atcs.shader'
...loading 'scripts/arachnid2.shader'
...loading 'scripts/jetpack.shader'
...loading 'scripts/core.shader'
...loading 'scripts/flame.shader'
...loading 'scripts/misc.shader'
...loading 'scripts/common-trem.shader'
...loading 'scripts/titan.shader'
...loading 'scripts/water.shader'
...loading 'scripts/displays.shader'
...loading 'scripts/plant_life.shader'
...loading 'scripts/stasis.shader'
...loading 'scripts/booster.shader'
...loading 'scripts/eggpod.shader'
...loading 'scripts/medistat.shader'
...loading 'scripts/mgturret.shader'
...loading 'scripts/reactor.shader'
...loading 'scripts/telenode.shader'
...loading 'scripts/trapper.shader'
...loading 'scripts/overmind.shader'
...loading 'scripts/tesla.shader'
...loading 'scripts/dcc.shader'
...loading 'scripts/hive.shader'
...loading 'scripts/level2.shader'
...loading 'scripts/human.shader'
...loading 'scripts/null.shader'
...loading 'scripts/weapons.shader'
...loading 'scripts/conkit.shader'
...loading 'scripts/advckit.shader'
...loading 'scripts/psaw.shader'
...loading 'scripts/mdriver.shader'
...loading 'scripts/flamer.shader'
...loading 'scripts/crosshairs.shader'
...loading 'scripts/grenade.shader'
...loading 'scripts/splash.shader'
...loading 'scripts/marks.shader'
...loading 'scripts/sprites.shader'
...loading 'scripts/muzzleflashes.shader'
----- finished R_Init -----
------ Initializing Sound ------
Initializing SDL audio driver...
ALSA lib confmisc.c:768:(parse_card) cannot find card '0'
ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory
ALSA lib confmisc.c:392:(snd_func_concat) error evaluating strings
ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory
ALSA lib confmisc.c:1251:(snd_func_refer) error evaluating name
ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:4633:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2211:(snd_pcm_open_noupdate) Unknown PCM default
SDL audio driver is "dsp".
SDL_AudioSpec:
Format: AUDIO_S16LSB
Freq: 22050
Samples: 512
Channels: 2
Starting SDL audio callback...
SDL audio initialized.
----- Sound Info -----
1 stereo
16384 samples
16 samplebits
1 submission_chunk
22050 speed
0xa4241f8 dma buffer
No background file.
Sound intialization successful.
Sound memory manager started
Loading vm file vm/ui.qvm...
...which has vmMagic VM_MAGIC_VER2
Loading 1075 jump table targets
VM file ui compiled to 786313 bytes of code
ui loaded in 4596672 bytes on the hunk
UI menu load time = 705 milli seconds
UI menu load time = 55 milli seconds
UI menu load time = 51 milli seconds
--- Common Initialization Complete ---
Opening IP socket: localhost:30720
Hostname: myhost.localdomain
Alias: myhost
IP: 127.0.0.1
Started tty console (use +set ttycon 0 to disable)
*********************************WARN_ONCE*********************************
File radeon_tcl.c function radeon_run_tcl_render line 499
Rendering was 734 commands larger than predicted size. We might overflow command buffer.
----- CL_Shutdown -----
Closing SDL audio device...
SDL audio device shut down.
RE_Shutdown( 1 )
----- CL_Shutdown -----
Shutdown tty console
[nick@myhost nick]#
Display all 3035 possibilities? (y or n)radionecrotic wrote:
Has this always been the case for you or did you update recently and it started happening? There appears to be some sort of conflict with some machines and new changes to the kernel to allow quicker mode setting. See http://bbs.archlinux.org/viewtopic.php? … 47#p659347. I had to add !radeon to my MODULES list in /etc/rc.conf to get X to even work at all. I don't run anything that uses OpenGL so I don't know if it'll address your issue.
You may also want to take a look at http://bbs.archlinux.org/viewtopic.php? … 20#p662920 and add intel_agp radeon (that's two modules, in that order) to your MODULES list.
Well, I was having the graphical corruption issue in that first thread until I added the nomodeset boot flag. As for the modesetting, I think it directly conflicts with my boot flag, and without it, I get corruption. =/ -
ATI Radeon HD 4870 Composite Video?
ATI's spec sheet on the Radeon HD 4870 states that it can provide an analog composite video out. Is this feature enabled on the version that can be optioned on the Mac Pro, and if so with what adapters?
apples videoadapter does not work with this graphiccard
http://support.apple.com/kb/HT2809 -
Radeon 9800 pro 256mb hanging on blue screen
I'm deep in the waters of frustration right now, and am hoping someone here might have the answer.
About 3 months ago I was looking for a video card for me to run motion. I saw the 9800 mac special edition with 128mb video ram had rave reviews. At that time ATI was not making them. So I turned to eBay...
I purchased a card that was advertised as a Mac 9800 pro special editing 128mb. I later found out it was a flashed pc card. The ebay seller told me the card worked fine on all his mac's that he tested it on.
The problem I was having was the machine boots up, I see the grey screen with the Apple logo and spinning wheel. I see the blue screen where normally I see the login progress bar loading the OS. But with this card I only see the blue screen. I hear the hard drive churning, so I am assuming it is still loading the OS, but I cannot see anything. I can reboot in safe mode and the video card works fine.
Well... I assumed it was the fault of the card and that it was flashed. I returned the card to the ebay seller, who sent me another one, same results with that one. I returned the card to the seller and he refunded my money.
I put the money toward the just released Radeon 9800 Pro Mac Edition 256mb card. I just got it a couple days ago and am experiencing the same problems. I have tried everything... everything I know and still can't get the card to work? Here is a list of what I have done:
With the flashed card:
1. Shut off computer and unplugged it. Removed OEM video card and installed ATI 9800 card. Plugged the power supply cable for the card into the computer power supply cable and hard drive.
Problem Occurs: When starting up, the grey screen comes up with the Apple on it, then the screen turns blue, where I typically would see the progress bar of the system loaded up before the user login screen. I only see a blue screen at this point but can hear the hard drive working for about a min.
2. Restarted the computer in safe mode.
3. Logged in as Admin user and opened the ATI preference pane to verify it sees the card.
When the ATI preference pane was loaded the following error message occured:
A startup problem has occured.
Cannot connect to ATI TVOut Kernal Extension. Some features are not available.
Clicked OK and the ATI preference pane appears.
4. Close the preference pane and reinstalled ATI Displays 4.5.6. Restarted computer.
Problem Occurs
5. Restarted computer holding down AppleOption+PR to clear PRAM. Cleared the PRAM 4 times in a row, by allowing the chime to happen 4 times.
Problem Occurs
6. Shut computer down. Disconnected the DVI plug for the cinema display and connected a VGA CRT monitor. Started computer.
Problem Occurs
7. Shut computer down, disconnected the VGA CRT monitor. Reconnected DVI plug and restarted computer.
Problem Occurs
8. Started the computer in safe mode. Logged into admin account. Opened the ATI Preference pane.
When the ATI preference pane was loaded the following error message occured:
A startup problem has occured.
Cannot connect to ATI TVOut Kernal Extension. Some features are not available.
Closed preference pane.
Went to ATI site and downloaded:
aug2005-radeo-universal-rom-update.dmg
Ran the updater.
Restarted computer.
Problem Occurs.
9. Restarted the computer in safe mode. Changed the login preference pannel to automatically log into the administrator account. Restarted computer, waited for the blue screen, then walked away for about 2 hours with the computer on blue screen, hoping the system was loading or doing something.
Problem Occurs.
10. Put in the TechTools Pro CD, hoping to run some tests on the video card from the cd. When booting from the CD OS...
Problem Occurs.
11. Enabled Root user. Logged in as root and installed ATI Displays 4.5.6 from there. Restarted computer.
Problem Occurs.
12. Shut down computer and installed old video card.
13. On an internal hard drive in the computer. Wiped the drive and formatted it. Installed 10.4.1 on the drive. booted up into the drive, installed ATI drivers, shut down computer, installed 9800 pro video card, booted up.
Problem Occurs.
With the new 9800 for Mac ATI card with 256mb:
With original card, install drivers, repairpermissions, shut down, install new card
Set to restart in single user, give 5 min to see if ATI monitor startup item in user starteputems loads
Hooked VGA & DVIt in together, both showed blue screen
Reset NVRAM via open firmware
Reset cuda button
Take battery out, wait at least 10 min, re-install new battery, press cuda button
Reinstall ATI update 4.5.6
Reset nvram from open firmware
In ATI control panel, selected 'Force Single Display Operation'
Change display scaling to 50%
Download latest Mac OS update from apple & reinstall
Help?I get dizzy just thinking about it.
I have tried installed a brand new OS, 3 different times on a different Hard Drive, still the card doesn't work.
I had one person suggest that it may be the card is not communicating with the OS Window Drawing module? (excuse my ignorance of what that is really called. I just know there is some program, possibly in the kernel, that is responsible for drawing out the OS windows.)
How can we rule out that it is a bad AGP slot?
•The slot works fine with my 9000.
•It works in safe mode with the 9800.
•I have installed a brand new OS, three different times, still doesn't work.
•I have used Apple Hardware test to test my hardware, the AGP slot didn't report any problems.
I am assuming that the AGP slot is working. Although I worry about it a bit, because by now I have swapped cards in it about 50 times in my troubleshooting.
Here is a link to a complete list of everything I have tried:
http://www.macosx.com/help/qview.php?questionid=19554#54138 -
GPU Lockup, system crashes and reboot on Radeon op...
Hi, I've been using the Radeon open-source driver for a while (2 weeks) on an AM1 platform. And once in a while the screen just becomes erratic (or filled with crazy lines), then just reboot itself. I've extracted the relevant journalctl output (the one labelled 'kernel') that might help in finding out what the problem is. I've also included the dmesg, Xorg.0.log, and Xorg.0.log.old, though I find there's nothing fishy about it.
CPUinfo (I only use the Integrated Graphic Card)
processor : 0
vendor_id : AuthenticAMD
cpu family : 22
model : 0
model name : AMD Athlon(tm) 5350 APU with Radeon(tm) R3
stepping : 1
microcode : 0x700010b
cpu MHz : 800.000
cache size : 2048 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf eagerfpu pni pclmulqdq monitor ssse3 cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt topoext perfctr_nb perfctr_l2 arat xsaveopt hw_pstate proc_feedback npt lbrv svm_lock nrip_save tsc_scale flushbyasid decodeassists pausefilter pfthreshold bmi1
bogomips : 4094.89
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts ttp tm 100mhzsteps hwpstate [11]
processor : 1
vendor_id : AuthenticAMD
cpu family : 22
model : 0
model name : AMD Athlon(tm) 5350 APU with Radeon(tm) R3
stepping : 1
microcode : 0x700010b
cpu MHz : 800.000
cache size : 2048 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 4
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf eagerfpu pni pclmulqdq monitor ssse3 cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt topoext perfctr_nb perfctr_l2 arat xsaveopt hw_pstate proc_feedback npt lbrv svm_lock nrip_save tsc_scale flushbyasid decodeassists pausefilter pfthreshold bmi1
bogomips : 4094.89
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts ttp tm 100mhzsteps hwpstate [11]
processor : 2
vendor_id : AuthenticAMD
cpu family : 22
model : 0
model name : AMD Athlon(tm) 5350 APU with Radeon(tm) R3
stepping : 1
microcode : 0x700010b
cpu MHz : 800.000
cache size : 2048 KB
physical id : 0
siblings : 4
core id : 2
cpu cores : 4
apicid : 2
initial apicid : 2
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf eagerfpu pni pclmulqdq monitor ssse3 cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt topoext perfctr_nb perfctr_l2 arat xsaveopt hw_pstate proc_feedback npt lbrv svm_lock nrip_save tsc_scale flushbyasid decodeassists pausefilter pfthreshold bmi1
bogomips : 4094.89
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts ttp tm 100mhzsteps hwpstate [11]
processor : 3
vendor_id : AuthenticAMD
cpu family : 22
model : 0
model name : AMD Athlon(tm) 5350 APU with Radeon(tm) R3
stepping : 1
microcode : 0x700010b
cpu MHz : 800.000
cache size : 2048 KB
physical id : 0
siblings : 4
core id : 3
cpu cores : 4
apicid : 3
initial apicid : 3
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf eagerfpu pni pclmulqdq monitor ssse3 cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt topoext perfctr_nb perfctr_l2 arat xsaveopt hw_pstate proc_feedback npt lbrv svm_lock nrip_save tsc_scale flushbyasid decodeassists pausefilter pfthreshold bmi1
bogomips : 4094.89
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts ttp tm 100mhzsteps hwpstate [11]
Journalctl
Jul 31 12:45:05 Schmidt slim[261]: [21806:21834:0731/124505:ERROR:channel.cc(297)] RawChannel fatal error (type 1)
Jul 31 12:45:07 Schmidt slim[261]: [WARNING:flash/platform/pepper/pep_module.cpp(63)] SANDBOXED
Jul 31 12:45:23 Schmidt slim[261]: [21806:21834:0731/124523:ERROR:raw_channel_posix.cc(139)] recvmsg: Connection reset by peer
Jul 31 12:45:23 Schmidt slim[261]: [21806:21834:0731/124523:ERROR:channel.cc(297)] RawChannel fatal error (type 1)
Jul 31 12:46:03 Schmidt slim[261]: [21806:21834:0731/124603:ERROR:raw_channel_posix.cc(139)] recvmsg: Connection reset by peer
Jul 31 12:46:03 Schmidt slim[261]: [21806:21834:0731/124603:ERROR:channel.cc(297)] RawChannel fatal error (type 1)
Jul 31 12:53:35 Schmidt slim[261]: [21806:21834:0731/125335:ERROR:raw_channel_posix.cc(139)] recvmsg: Connection reset by peer
Jul 31 12:53:35 Schmidt slim[261]: [21806:21834:0731/125335:ERROR:channel.cc(297)] RawChannel fatal error (type 1)
Jul 31 12:53:36 Schmidt slim[261]: [21806:21834:0731/125336:ERROR:raw_channel_posix.cc(139)] recvmsg: Connection reset by peer
Jul 31 12:53:36 Schmidt slim[261]: [21806:21834:0731/125336:ERROR:channel.cc(297)] RawChannel fatal error (type 1)
Jul 31 12:53:37 Schmidt slim[261]: [21806:21834:0731/125337:ERROR:raw_channel_posix.cc(139)] recvmsg: Connection reset by peer
Jul 31 12:53:37 Schmidt slim[261]: [21806:21834:0731/125337:ERROR:channel.cc(297)] RawChannel fatal error (type 1)
Jul 31 12:53:38 Schmidt slim[261]: [21806:21834:0731/125338:ERROR:raw_channel_posix.cc(139)] recvmsg: Connection reset by peer
Jul 31 12:53:38 Schmidt slim[261]: [21806:21834:0731/125338:ERROR:channel.cc(297)] RawChannel fatal error (type 1)
Jul 31 12:54:37 Schmidt slim[261]: [21806:21834:0731/125437:ERROR:raw_channel_posix.cc(139)] recvmsg: Connection reset by peer
Jul 31 12:54:37 Schmidt slim[261]: [21806:21834:0731/125437:ERROR:channel.cc(297)] RawChannel fatal error (type 1)
Jul 31 12:54:56 Schmidt slim[261]: [21806:21834:0731/125456:ERROR:raw_channel_posix.cc(139)] recvmsg: Connection reset by peer
Jul 31 12:54:56 Schmidt slim[261]: [21806:21834:0731/125456:ERROR:channel.cc(297)] RawChannel fatal error (type 1)
Jul 31 12:58:45 Schmidt slim[261]: [21806:21834:0731/125845:ERROR:raw_channel_posix.cc(139)] recvmsg: Connection reset by peer
Jul 31 12:58:45 Schmidt slim[261]: [21806:21834:0731/125845:ERROR:channel.cc(297)] RawChannel fatal error (type 1)
Jul 31 12:58:58 Schmidt slim[261]: [21806:21834:0731/125858:ERROR:raw_channel_posix.cc(139)] recvmsg: Connection reset by peer
Jul 31 12:58:58 Schmidt slim[261]: [21806:21834:0731/125858:ERROR:channel.cc(297)] RawChannel fatal error (type 1)
Jul 31 12:59:00 Schmidt slim[261]: [: ']' expected
Jul 31 12:59:02 Schmidt dbus[254]: [system] Activating via systemd: service name='org.freedesktop.UDisks2' unit='udisks2.service'
Jul 31 12:59:02 Schmidt udisksd[1484]: udisks daemon version 2.1.3 starting
Jul 31 12:59:02 Schmidt dbus[254]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Jul 31 12:59:02 Schmidt udisksd[1484]: Acquired the name org.freedesktop.UDisks2 on the system message bus
Jul 31 12:59:03 Schmidt slim[261]: ** (pcmanfm:1478): WARNING **: terminal termite isn't known, consider report it to LibFM developers
Jul 31 12:59:03 Schmidt slim[261]: ** (pcmanfm:1478): WARNING **: The directory '~/Templates' doesn't exist, ignoring it
Jul 31 12:59:18 Schmidt slim[261]: [21806:21834:0731/125918:ERROR:raw_channel_posix.cc(139)] recvmsg: Connection reset by peer
Jul 31 12:59:18 Schmidt slim[261]: [21806:21834:0731/125918:ERROR:channel.cc(297)] RawChannel fatal error (type 1)
Jul 31 12:59:36 Schmidt slim[261]: [21806:21834:0731/125936:ERROR:raw_channel_posix.cc(139)] recvmsg: Connection reset by peer
Jul 31 12:59:36 Schmidt slim[261]: [21806:21834:0731/125936:ERROR:channel.cc(297)] RawChannel fatal error (type 1)
Jul 31 13:21:17 Schmidt kernel: radeon 0000:00:01.0: ring 0 stalled for more than 10003msec
Jul 31 13:21:17 Schmidt kernel: radeon 0000:00:01.0: GPU lockup (waiting for 0x00000000002228ef last fence id 0x00000000002228ee on ring 0)
Jul 31 13:21:17 Schmidt kernel: radeon 0000:00:01.0: failed to get a new IB (-35)
Jul 31 13:21:17 Schmidt kernel: radeon 0000:00:01.0: failed to get a new IB (-35)
Jul 31 13:21:18 Schmidt kernel: radeon 0000:00:01.0: ring 0 stalled for more than 10503msec
Jul 31 13:21:18 Schmidt kernel: radeon 0000:00:01.0: GPU lockup (waiting for 0x00000000002228ef last fence id 0x00000000002228ee on ring 0)
Jul 31 13:21:18 Schmidt kernel: radeon 0000:00:01.0: failed to get a new IB (-35)
Jul 31 13:21:18 Schmidt kernel: radeon 0000:00:01.0: failed to get a new IB (-35)
Jul 31 13:21:18 Schmidt kernel: radeon 0000:00:01.0: failed to get a new IB (-35)
Jul 31 13:21:18 Schmidt kernel: radeon 0000:00:01.0: failed to get a new IB (-35)
Jul 31 13:21:18 Schmidt kernel: radeon 0000:00:01.0: failed to get a new IB (-35)
Jul 31 13:21:18 Schmidt kernel: radeon 0000:00:01.0: failed to get a new IB (-35)
Jul 31 13:21:18 Schmidt kernel: radeon 0000:00:01.0: failed to get a new IB (-35)
Jul 31 13:21:18 Schmidt slim[261]: [21841:21857:0731/132118:ERROR:gpu_watchdog_thread.cc(253)] The GPU process hung. Terminating after 10000 ms.
Jul 31 13:21:18 Schmidt kernel: Watchdog[21857]: segfault at 0 ip 00007fbadba6d906 sp 00007fbac7c32890 error 6 in chromium[7fbad7f59000+5864000]
Jul 31 13:21:19 Schmidt kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Jul 31 13:21:20 Schmidt kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Jul 31 13:21:21 Schmidt kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
Jul 31 13:21:22 Schmidt kernel: [drm:uvd_v1_0_start] *ERROR* UVD not responding, trying to reset the VCPU!!!
-- Reboot --
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.15.7-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Mon Jul 28 20:06:17 CEST 2014
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=4f7f0918-72a6-4e96-8326-d67b9581d5c2 rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009d5e5fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d5e6000-0x000000009d615fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009d616000-0x000000009d650fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d651000-0x000000009d70efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009d70f000-0x000000009e3eafff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009e3eb000-0x000000009e42efff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000009e42f000-0x000000009e42ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009e430000-0x000000009e437fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009e438000-0x000000009e871fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009e872000-0x000000009eff2fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009eff3000-0x000000009effffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0x9d6d5000 ACPI 2.0=0x9d6d5000 SMBIOS=0xf04d0 MPS=0xfd4b0
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
[ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000003e000) (0MB)
[ 0.000000] efi: mem02: type=4, attr=0xf, range=[0x000000000003e000-0x0000000000040000) (0MB)
[ 0.000000] efi: mem03: type=3, attr=0xf, range=[0x0000000000040000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000001000000-0x0000000002060000) (16MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000002060000-0x0000000037552000) (852MB)
[ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000037552000-0x0000000037aa1000) (5MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000037aa1000-0x000000006a479000) (809MB)
[ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x000000006a479000-0x000000008ebf1000) (583MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x000000008ebf1000-0x000000008ebf7000) (0MB)
[ 0.000000] efi: mem11: type=1, attr=0xf, range=[0x000000008ebf7000-0x000000008ec14000) (0MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x000000008ec14000-0x0000000091915000) (45MB)
[ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x0000000091915000-0x000000009196b000) (0MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x000000009196b000-0x000000009198f000) (0MB)
[ 0.000000] efi: mem15: type=4, attr=0xf, range=[0x000000009198f000-0x000000009199a000) (0MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x000000009199a000-0x0000000091a1a000) (0MB)
[ 0.000000] efi: mem17: type=4, attr=0xf, range=[0x0000000091a1a000-0x0000000091a1b000) (0MB)
[ 0.000000] efi: mem18: type=7, attr=0xf, range=[0x0000000091a1b000-0x0000000091a40000) (0MB)
[ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x0000000091a40000-0x0000000091a4b000) (0MB)
[ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x0000000091a4b000-0x0000000091a62000) (0MB)
[ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x0000000091a62000-0x0000000091a63000) (0MB)
[ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x0000000091a63000-0x0000000091a8a000) (0MB)
[ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x0000000091a8a000-0x0000000091a8b000) (0MB)
[ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x0000000091a8b000-0x0000000091acd000) (0MB)
[ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x0000000091acd000-0x0000000091acf000) (0MB)
[ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x0000000091acf000-0x0000000091af0000) (0MB)
[ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x0000000091af0000-0x0000000091afb000) (0MB)
[ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x0000000091afb000-0x0000000091b1e000) (0MB)
[ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x0000000091b1e000-0x0000000091b40000) (0MB)
[ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x0000000091b40000-0x0000000091b4d000) (0MB)
[ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x0000000091b4d000-0x0000000091b4e000) (0MB)
[ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x0000000091b4e000-0x0000000091b5d000) (0MB)
[ 0.000000] efi: mem33: type=4, attr=0xf, range=[0x0000000091b5d000-0x0000000091c0c000) (0MB)
[ 0.000000] efi: mem34: type=7, attr=0xf, range=[0x0000000091c0c000-0x0000000091c2c000) (0MB)
[ 0.000000] efi: mem35: type=4, attr=0xf, range=[0x0000000091c2c000-0x0000000091cc4000) (0MB)
[ 0.000000] efi: mem36: type=7, attr=0xf, range=[0x0000000091cc4000-0x0000000091cc5000) (0MB)
[ 0.000000] efi: mem37: type=4, attr=0xf, range=[0x0000000091cc5000-0x0000000091d73000) (0MB)
[ 0.000000] efi: mem38: type=7, attr=0xf, range=[0x0000000091d73000-0x0000000091d8f000) (0MB)
[ 0.000000] efi: mem39: type=4, attr=0xf, range=[0x0000000091d8f000-0x0000000091e21000) (0MB)
[ 0.000000] efi: mem40: type=7, attr=0xf, range=[0x0000000091e21000-0x0000000091e41000) (0MB)
[ 0.000000] efi: mem41: type=4, attr=0xf, range=[0x0000000091e41000-0x0000000092059000) (2MB)
[ 0.000000] efi: mem42: type=7, attr=0xf, range=[0x0000000092059000-0x000000009205c000) (0MB)
[ 0.000000] efi: mem43: type=4, attr=0xf, range=[0x000000009205c000-0x000000009207a000) (0MB)
[ 0.000000] efi: mem44: type=7, attr=0xf, range=[0x000000009207a000-0x000000009207c000) (0MB)
[ 0.000000] efi: mem45: type=4, attr=0xf, range=[0x000000009207c000-0x000000009207e000) (0MB)
[ 0.000000] efi: mem46: type=7, attr=0xf, range=[0x000000009207e000-0x0000000092080000) (0MB)
[ 0.000000] efi: mem47: type=4, attr=0xf, range=[0x0000000092080000-0x0000000092083000) (0MB)
[ 0.000000] efi: mem48: type=7, attr=0xf, range=[0x0000000092083000-0x0000000092084000) (0MB)
[ 0.000000] efi: mem49: type=4, attr=0xf, range=[0x0000000092084000-0x000000009bd9e000) (157MB)
[ 0.000000] efi: mem50: type=7, attr=0xf, range=[0x000000009bd9e000-0x000000009bda1000) (0MB)
[ 0.000000] efi: mem51: type=4, attr=0xf, range=[0x000000009bda1000-0x000000009bda2000) (0MB)
[ 0.000000] efi: mem52: type=7, attr=0xf, range=[0x000000009bda2000-0x000000009bda3000) (0MB)
[ 0.000000] efi: mem53: type=4, attr=0xf, range=[0x000000009bda3000-0x000000009ce78000) (16MB)
[ 0.000000] efi: mem54: type=7, attr=0xf, range=[0x000000009ce78000-0x000000009d31c000) (4MB)
[ 0.000000] efi: mem55: type=3, attr=0xf, range=[0x000000009d31c000-0x000000009d5e6000) (2MB)
[ 0.000000] efi: mem56: type=0, attr=0xf, range=[0x000000009d5e6000-0x000000009d5fe000) (0MB)
[ 0.000000] efi: mem57: type=0, attr=0xf, range=[0x000000009d5fe000-0x000000009d616000) (0MB)
[ 0.000000] efi: mem58: type=7, attr=0xf, range=[0x000000009d616000-0x000000009d645000) (0MB)
[ 0.000000] efi: mem59: type=2, attr=0xf, range=[0x000000009d645000-0x000000009d651000) (0MB)
[ 0.000000] efi: mem60: type=10, attr=0xf, range=[0x000000009d651000-0x000000009d6e7000) (0MB)
[ 0.000000] efi: mem61: type=10, attr=0xf, range=[0x000000009d6e7000-0x000000009d6f2000) (0MB)
[ 0.000000] efi: mem62: type=10, attr=0xf, range=[0x000000009d6f2000-0x000000009d70f000) (0MB)
[ 0.000000] efi: mem63: type=6, attr=0x800000000000000f, range=[0x000000009d70f000-0x000000009e11e000) (10MB)
[ 0.000000] efi: mem64: type=6, attr=0x800000000000000f, range=[0x000000009e11e000-0x000000009e215000) (0MB)
[ 0.000000] efi: mem65: type=6, attr=0x800000000000000f, range=[0x000000009e215000-0x000000009e217000) (0MB)
[ 0.000000] efi: mem66: type=6, attr=0x800000000000000f, range=[0x000000009e217000-0x000000009e330000) (1MB)
[ 0.000000] efi: mem67: type=6, attr=0x800000000000000f, range=[0x000000009e330000-0x000000009e332000) (0MB)
[ 0.000000] efi: mem68: type=6, attr=0x800000000000000f, range=[0x000000009e332000-0x000000009e3eb000) (0MB)
[ 0.000000] efi: mem69: type=5, attr=0x800000000000000f, range=[0x000000009e3eb000-0x000000009e3f8000) (0MB)
[ 0.000000] efi: mem70: type=5, attr=0x800000000000000f, range=[0x000000009e3f8000-0x000000009e42f000) (0MB)
[ 0.000000] efi: mem71: type=4, attr=0xf, range=[0x000000009e42f000-0x000000009e430000) (0MB)
[ 0.000000] efi: mem72: type=10, attr=0xf, range=[0x000000009e430000-0x000000009e438000) (0MB)
[ 0.000000] efi: mem73: type=4, attr=0xf, range=[0x000000009e438000-0x000000009e58e000) (1MB)
[ 0.000000] efi: mem74: type=3, attr=0xf, range=[0x000000009e58e000-0x000000009e83a000) (2MB)
[ 0.000000] efi: mem75: type=4, attr=0xf, range=[0x000000009e83a000-0x000000009e852000) (0MB)
[ 0.000000] efi: mem76: type=3, attr=0xf, range=[0x000000009e852000-0x000000009e864000) (0MB)
[ 0.000000] efi: mem77: type=4, attr=0xf, range=[0x000000009e864000-0x000000009e865000) (0MB)
[ 0.000000] efi: mem78: type=3, attr=0xf, range=[0x000000009e865000-0x000000009e867000) (0MB)
[ 0.000000] efi: mem79: type=4, attr=0xf, range=[0x000000009e867000-0x000000009e872000) (0MB)
[ 0.000000] efi: mem80: type=6, attr=0x800000000000000f, range=[0x000000009e872000-0x000000009eff3000) (7MB)
[ 0.000000] efi: mem81: type=4, attr=0xf, range=[0x000000009eff3000-0x000000009f000000) (0MB)
[ 0.000000] efi: mem82: type=7, attr=0xf, range=[0x0000000100000000-0x000000023f000000) (5104MB)
[ 0.000000] efi: mem83: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem84: type=11, attr=0x8000000000000001, range=[0x00000000fec01000-0x00000000fec02000) (0MB)
[ 0.000000] efi: mem85: type=11, attr=0x8000000000000001, range=[0x00000000fec10000-0x00000000fec11000) (0MB)
[ 0.000000] efi: mem86: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed01000) (0MB)
[ 0.000000] efi: mem87: type=11, attr=0x8000000000000001, range=[0x00000000fed40000-0x00000000fed45000) (0MB)
[ 0.000000] efi: mem88: type=11, attr=0x8000000000000001, range=[0x00000000fed80000-0x00000000fed81000) (0MB)
[ 0.000000] efi: mem89: type=11, attr=0x8000000000000001, range=[0x00000000fed81000-0x00000000fed90000) (0MB)
[ 0.000000] efi: mem90: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: MSI MS-7865/AM1I (MS-7865), BIOS V10.0 02/21/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFE0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000023f000000 aka 9200M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xa0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x9f000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd6f0-0x000fd6ff] mapped at [ffff8800000fd6f0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b3e000, 0x01b3efff] PGTABLE
[ 0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
[ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23ee00000-0x23effffff]
[ 0.000000] [mem 0x23ee00000-0x23effffff] page 2M
[ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23c000000-0x23edfffff]
[ 0.000000] [mem 0x23c000000-0x23edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff]
[ 0.000000] [mem 0x200000000-0x23bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x9d5e5fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x9d3fffff] page 2M
[ 0.000000] [mem 0x9d400000-0x9d5e5fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9d616000-0x9d650fff]
[ 0.000000] [mem 0x9d616000-0x9d650fff] page 4k
[ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x9e42f000-0x9e42ffff]
[ 0.000000] [mem 0x9e42f000-0x9e42ffff] page 4k
[ 0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x9e438000-0x9e871fff]
[ 0.000000] [mem 0x9e438000-0x9e5fffff] page 4k
[ 0.000000] [mem 0x9e600000-0x9e7fffff] page 2M
[ 0.000000] [mem 0x9e800000-0x9e871fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9eff3000-0x9effffff]
[ 0.000000] [mem 0x9eff3000-0x9effffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x37552000-0x37aa0fff]
[ 0.000000] ACPI: RSDP 0x000000009D6D5000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x000000009D6D5078 000074 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000009D6DA208 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20140214/tbfadt-634)
[ 0.000000] ACPI: DSDT 0x000000009D6D5188 00507E (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x000000009D705D80 000040
[ 0.000000] ACPI: APIC 0x000000009D6DA318 00007E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000009D6DA398 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000009D6DA3E0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x000000009D6DA420 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: SSDT 0x000000009D6DA458 000E58 (v01 AMD AGESA 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x000000009D6DB2B0 0046B7 (v02 AMD AGESA 00000002 MSFT 04000000)
[ 0.000000] ACPI: CRAT 0x000000009D6DF968 0003A8 (v01 AMD AGESA 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x000000009D6DFD10 001204 (v01 AMD CPMCMN 00000001 INTL 20051117)
[ 0.000000] ACPI: BGRT 0x000000009D6E0F18 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23effffff]
[ 0.000000] NODE_DATA [mem 0x23eff7000-0x23effbfff]
[ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236e00000-ffff88023e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x23effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009ffff]
[ 0.000000] node 0: [mem 0x00100000-0x9d5e5fff]
[ 0.000000] node 0: [mem 0x9d616000-0x9d650fff]
[ 0.000000] node 0: [mem 0x9e42f000-0x9e42ffff]
[ 0.000000] node 0: [mem 0x9e438000-0x9e871fff]
[ 0.000000] node 0: [mem 0x9eff3000-0x9effffff]
[ 0.000000] node 0: [mem 0x100000000-0x23effffff]
[ 0.000000] On node 0 totalpages: 1952264
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 27 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10026 pages used for memmap
[ 0.000000] DMA32 zone: 641641 pages, LIFO batch:31
[ 0.000000] Normal zone: 20416 pages used for memmap
[ 0.000000] Normal zone: 1306624 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec01000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 6, version 33, address 0xfec01000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 72
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d5e6000-0x9d615fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d651000-0x9d70efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d70f000-0x9e3eafff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e3eb000-0x9e42efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e430000-0x9e437fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e872000-0x9eff2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x9f000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88023ec00000 s87168 r8192 d23424 u524288
[ 0.000000] pcpu-alloc: s87168 r8192 d23424 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1921731
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=4f7f0918-72a6-4e96-8326-d67b9581d5c2 rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 0 size 32 MB
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 88000000
[ 0.000000] PM: Registered nosave memory: [mem 0x88000000-0x8bffffff]
[ 0.000000] Memory: 7345896K/7809056K available (5225K kernel code, 886K rwdata, 1644K rodata, 1116K init, 1284K bss, 463160K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:1024 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 31457280 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2046.190 MHz processor
[ 0.000044] Calibrating delay loop (skipped), value calculated using timer frequency.. 4094.89 BogoMIPS (lpj=6820633)
[ 0.000049] pid_max: default: 32768 minimum: 301
[ 0.000060] ACPI: Core revision 20140214
[ 0.011848] ACPI: All ACPI Tables successfully acquired
[ 0.013681] Security Framework initialized
[ 0.013693] Yama: becoming mindful.
[ 0.014576] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.017768] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.019267] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.019289] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.019649] Initializing cgroup subsys memory
[ 0.019659] Initializing cgroup subsys devices
[ 0.019663] Initializing cgroup subsys freezer
[ 0.019666] Initializing cgroup subsys net_cls
[ 0.019669] Initializing cgroup subsys blkio
[ 0.019702] tseg: 009f000000
[ 0.019706] CPU: Physical Processor ID: 0
[ 0.019708] CPU: Processor Core ID: 0
[ 0.019711] mce: CPU supports 6 MCE banks
[ 0.019723] LVT offset 1 assigned for vector 0xf9
[ 0.019731] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
tlb_flushall_shift: 6
[ 0.019867] Freeing SMP alternatives memory: 20K (ffffffff819f6000 - ffffffff819fb000)
[ 0.029250] ftrace: allocating 20230 entries in 80 pages
[ 0.041155] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.074138] smpboot: CPU0: AMD Athlon(tm) 5350 APU with Radeon(tm) R3 (fam: 16, model: 00, stepping: 01)
[ 0.180173] Performance Events: AMD PMU driver.
[ 0.180180] ... version: 0
[ 0.180182] ... bit width: 48
[ 0.180184] ... generic registers: 4
[ 0.180187] ... value mask: 0000ffffffffffff
[ 0.180189] ... max period: 00007fffffffffff
[ 0.180190] ... fixed-purpose events: 0
[ 0.180192] ... event mask: 000000000000000f
[ 0.200411] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.207126] x86: Booting SMP configuration:
[ 0.207133] .... node #0, CPUs: #1 #2 #3
[ 0.260333] x86: Booted up 1 node, 4 CPUs
[ 0.260341] smpboot: Total of 4 processors activated (16376.58 BogoMIPS)
[ 0.261382] devtmpfs: initialized
[ 0.268220] PM: Registering ACPI NVS region [mem 0x9d651000-0x9d70efff] (778240 bytes)
[ 0.268242] PM: Registering ACPI NVS region [mem 0x9e430000-0x9e437fff] (32768 bytes)
[ 0.269820] pinctrl core: initialized pinctrl subsystem
[ 0.269856] RTC time: 6:21:54, date: 07/31/14
[ 0.269922] NET: Registered protocol family 16
[ 0.270081] cpuidle: using governor ladder
[ 0.270084] cpuidle: using governor menu
[ 0.270163] ACPI: bus type PCI registered
[ 0.270166] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.270256] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.270260] PCI: not using MMCONFIG
[ 0.270264] PCI: Using configuration type 1 for base access
[ 0.270265] PCI: Using configuration type 1 for extended access
[ 0.271917] ACPI: Added _OSI(Module Device)
[ 0.271920] ACPI: Added _OSI(Processor Device)
[ 0.271922] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.271924] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.274782] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.281018] ACPI: Interpreter enabled
[ 0.281028] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580)
[ 0.281035] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
[ 0.281058] ACPI: (supports S0 S3 S4 S5)
[ 0.281060] ACPI: Using IOAPIC for interrupt routing
[ 0.281093] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.281158] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.281837] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.406483] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.406495] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.406752] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[ 0.406890] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.406896] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[ 0.406900] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[ 0.406903] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.407475] PCI host bridge to bus 0000:00
[ 0.407480] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.407484] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.407487] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.407490] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.407494] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.407497] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.407500] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.407503] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
[ 0.407515] pci 0000:00:00.0: [1022:1536] type 00 class 0x060000
[ 0.407651] pci 0000:00:01.0: [1002:9830] type 00 class 0x030000
[ 0.407669] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.407682] pci 0000:00:01.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref]
[ 0.407691] pci 0000:00:01.0: reg 0x20: [io 0xf000-0xf0ff]
[ 0.407700] pci 0000:00:01.0: reg 0x24: [mem 0xfeb00000-0xfeb3ffff]
[ 0.407709] pci 0000:00:01.0: reg 0x30: [mem 0xfeb40000-0xfeb5ffff pref]
[ 0.407754] pci 0000:00:01.0: supports D1 D2
[ 0.407757] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[ 0.407865] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
[ 0.407880] pci 0000:00:01.1: reg 0x10: [mem 0xfeb64000-0xfeb67fff 64bit]
[ 0.407949] pci 0000:00:01.1: supports D1 D2
[ 0.408043] pci 0000:00:02.0: [1022:1538] type 00 class 0x060000
[ 0.408161] pci 0000:00:02.4: [1022:1439] type 01 class 0x060400
[ 0.408240] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
[ 0.408296] pci 0000:00:02.4: System wakeup disabled by ACPI
[ 0.408385] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[ 0.408406] pci 0000:00:10.0: reg 0x10: [mem 0xfeb68000-0xfeb69fff 64bit]
[ 0.408505] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.408562] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 0.408634] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.408654] pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147]
[ 0.408664] pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133]
[ 0.408674] pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127]
[ 0.408684] pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113]
[ 0.408693] pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f]
[ 0.408704] pci 0000:00:11.0: reg 0x24: [mem 0xfeb6e000-0xfeb6e3ff]
[ 0.408752] pci 0000:00:11.0: PME# supported from D3hot
[ 0.408858] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.408872] pci 0000:00:12.0: reg 0x10: [mem 0xfeb6d000-0xfeb6dfff]
[ 0.408963] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.409028] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.409047] pci 0000:00:12.2: reg 0x10: [mem 0xfeb6c000-0xfeb6c0ff]
[ 0.409119] pci 0000:00:12.2: supports D1 D2
[ 0.409122] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.409172] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.409235] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.409249] pci 0000:00:13.0: reg 0x10: [mem 0xfeb6b000-0xfeb6bfff]
[ 0.409340] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.409404] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.409422] pci 0000:00:13.2: reg 0x10: [mem 0xfeb6a000-0xfeb6a0ff]
[ 0.409495] pci 0000:00:13.2: supports D1 D2
[ 0.409498] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.409547] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.409611] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.409751] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.409771] pci 0000:00:14.2: reg 0x10: [mem 0xfeb60000-0xfeb63fff 64bit]
[ 0.409830] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.409878] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.409938] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.410088] pci 0000:00:18.0: [1022:1530] type 00 class 0x060000
[ 0.410195] pci 0000:00:18.1: [1022:1531] type 00 class 0x060000
[ 0.410290] pci 0000:00:18.2: [1022:1532] type 00 class 0x060000
[ 0.410385] pci 0000:00:18.3: [1022:1533] type 00 class 0x060000
[ 0.410486] pci 0000:00:18.4: [1022:1534] type 00 class 0x060000
[ 0.410580] pci 0000:00:18.5: [1022:1535] type 00 class 0x060000
[ 0.410775] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.410803] pci 0000:01:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.410837] pci 0000:01:00.0: reg 0x18: [mem 0xfea00000-0xfea00fff 64bit]
[ 0.410860] pci 0000:01:00.0: reg 0x20: [mem 0xd0800000-0xd0803fff 64bit pref]
[ 0.410961] pci 0000:01:00.0: supports D1 D2
[ 0.410964] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.416988] pci 0000:00:02.4: PCI bridge to [bus 01]
[ 0.417002] pci 0000:00:02.4: bridge window [io 0xe000-0xefff]
[ 0.417007] pci 0000:00:02.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.417015] pci 0000:00:02.4: bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
[ 0.417355] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 *11 14 15)
[ 0.417460] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 *5 7 10 11 14 15)
[ 0.417565] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 *11 14 15)
[ 0.417670] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 *10 11 14 15)
[ 0.417756] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 *11 14 15)
[ 0.417837] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 *10 11 14 15)
[ 0.417908] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.417979] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 *5 7 10 11 14 15)
[ 0.418370] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.418377] vgaarb: loaded
[ 0.418379] vgaarb: bridge control possible 0000:00:01.0
[ 0.418493] PCI: Using ACPI for IRQ routing
[ 0.425615] PCI: pci_cache_line_size set to 64 bytes
[ 0.425669] e820: reserve RAM buffer [mem 0x9d5e6000-0x9fffffff]
[ 0.425673] e820: reserve RAM buffer [mem 0x9d651000-0x9fffffff]
[ 0.425676] e820: reserve RAM buffer [mem 0x9e430000-0x9fffffff]
[ 0.425679] e820: reserve RAM buffer [mem 0x9e872000-0x9fffffff]
[ 0.425681] e820: reserve RAM buffer [mem 0x9f000000-0x9fffffff]
[ 0.425683] e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
[ 0.425838] NetLabel: Initializing
[ 0.425840] NetLabel: domain hash size = 128
[ 0.425842] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.425861] NetLabel: unlabeled traffic allowed by default
[ 0.425889] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.425894] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.427961] Switched to clocksource hpet
[ 0.435472] pnp: PnP ACPI init
[ 0.435501] ACPI: bus type PNP registered
[ 0.435697] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.435704] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.435836] system 00:01: [mem 0xa0000000-0xbfffffff] has been reserved
[ 0.435840] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.436048] system 00:02: [io 0x0a00-0x0a0f] has been reserved
[ 0.436052] system 00:02: [io 0x0a10-0x0a1f] has been reserved
[ 0.436056] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.436308] pnp 00:03: [dma 0 disabled]
[ 0.436387] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.436455] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.436473] pnp 00:05: [dma 4]
[ 0.436507] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.436563] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.436605] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.436701] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.436706] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.436759] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.437185] system 00:0a: [io 0x04d0-0x04d1] has been reserved
[ 0.437189] system 00:0a: [io 0x040b] has been reserved
[ 0.437193] system 00:0a: [io 0x04d6] has been reserved
[ 0.437196] system 00:0a: [io 0x0c00-0x0c01] has been reserved
[ 0.437200] system 00:0a: [io 0x0c14] has been reserved
[ 0.437203] system 00:0a: [io 0x0c50-0x0c51] has been reserved
[ 0.437206] system 00:0a: [io 0x0c52] has been reserved
[ 0.437210] system 00:0a: [io 0x0c6c] has been reserved
[ 0.437213] system 00:0a: [io 0x0c6f] has been reserved
[ 0.437216] system 00:0a: [io 0x0cd0-0x0cd1] has been reserved
[ 0.437220] system 00:0a: [io 0x0cd2-0x0cd3] has been reserved
[ 0.437223] system 00:0a: [io 0x0cd4-0x0cd5] has been reserved
[ 0.437227] system 00:0a: [io 0x0cd6-0x0cd7] has been reserved
[ 0.437230] system 00:0a: [io 0x0cd8-0x0cdf] has been reserved
[ 0.437234] system 00:0a: [io 0x0800-0x089f] could not be reserved
[ 0.437237] system 00:0a: [io 0x0b20-0x0b3f] has been reserved
[ 0.437241] system 00:0a: [io 0x0900-0x090f] has been reserved
[ 0.437244] system 00:0a: [io 0x0910-0x091f] has been reserved
[ 0.437248] system 00:0a: [io 0xfe00-0xfefe] has been reserved
[ 0.437252] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.437256] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.437260] system 00:0a: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.437264] system 00:0a: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.437268] system 00:0a: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.437272] system 00:0a: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.437276] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[ 0.437280] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.437634] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.437642] pnp: PnP ACPI: found 12 devices
[ 0.437644] ACPI: bus type PNP unregistered
[ 0.445912] pci 0000:00:02.4: PCI bridge to [bus 01]
[ 0.445918] pci 0000:00:02.4: bridge window [io 0xe000-0xefff]
[ 0.445925] pci 0000:00:02.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.445930] pci 0000:00:02.4: bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
[ 0.445938] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.445941] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.445945] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.445948] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.445951] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.445955] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.445958] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.445962] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.445965] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.445968] pci_bus 0000:01: resource 2 [mem 0xd0800000-0xd08fffff 64bit pref]
[ 0.446002] NET: Registered protocol family 2
[ 0.446281] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.446558] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.446851] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.446905] TCP: reno registered
[ 0.446922] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.446984] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.447118] NET: Registered protocol family 1
[ 0.447142] pci 0000:00:01.0: Boot video device
[ 0.447923] PCI: CLS 64 bytes, default 64
[ 0.448045] Unpacking initramfs...
[ 0.589159] Freeing initrd memory: 5436K (ffff880037552000 - ffff880037aa1000)
[ 0.589170] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.589175] software IO TLB [mem 0x8d915000-0x91915000] (64MB) mapped at [ffff88008d915000-ffff880091914fff]
[ 0.589485] perf: AMD NB counters detected
[ 0.589488] perf: AMD L2I counters detected
[ 0.589530] LVT offset 0 assigned for vector 0x400
[ 0.589549] perf: AMD IBS detected (0x000000ff)
[ 0.589599] Scanning for low memory corruption every 60 seconds
[ 0.590047] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.608813] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.611213] zbud: loaded
[ 0.611474] VFS: Disk quotas dquot_6.5.2
[ 0.611533] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.611724] msgmni has been set to 14730
[ 0.611801] Key type big_key registered
[ 0.612044] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.612107] io scheduler noop registered
[ 0.612109] io scheduler deadline registered
[ 0.612157] io scheduler cfq registered (default)
[ 0.612452] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.612478] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.612532] efifb: probing for efifb
[ 0.612556] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 1984k, total 1984k
[ 0.612559] efifb: mode is 800x600x32, linelength=3328, pages=1
[ 0.612560] efifb: scrolling: redraw
[ 0.612564] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.614955] Console: switching to colour frame buffer device 100x37
[ 0.617194] fb0: EFI VGA frame buffer device
[ 0.617238] GHES: HEST is not enabled!
[ 0.617339] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.637865] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.638462] Linux agpgart interface v0.103
[ 0.638526] rtc_cmos 00:06: RTC can wake from S4
[ 0.638664] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.638693] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.638709] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.638849] TCP: cubic registered
[ 0.639009] NET: Registered protocol family 10
[ 0.639379] NET: Registered protocol family 17
[ 0.639856] registered taskstats version 1
[ 0.640289] Magic number: 6:792:368
[ 0.640394] rtc_cmos 00:06: setting system clock to 2014-07-31 06:21:55 UTC (1406787715)
[ 0.640489] PM: Hibernation image not present or could not be loaded.
[ 0.642246] Freeing unused kernel memory: 1116K (ffffffff818df000 - ffffffff819f6000)
[ 0.642250] Write protecting the kernel read-only data: 8192k
[ 0.646438] Freeing unused kernel memory: 908K (ffff88000151d000 - ffff880001600000)
[ 0.648217] Freeing unused kernel memory: 404K (ffff88000179b000 - ffff880001800000)
[ 0.657217] random: systemd-tmpfile urandom read with 2 bits of entropy available
[ 0.659086] systemd-udevd[58]: starting version 215
[ 0.662926] [drm] Initialized drm 1.1.0 20060810
[ 0.671034] [drm] radeon kernel modesetting enabled.
[ 0.671150] checking generic (c0000000 1f0000) vs hw (c0000000 10000000)
[ 0.671153] fb: switching to radeondrmfb from EFI VGA
[ 0.671185] Console: switching to colour dummy device 80x25
[ 0.671723] [drm] initializing kernel modesetting (KABINI 0x1002:0x9830 0x1462:0x7865).
[ 0.671738] [drm] register mmio base: 0xFEB00000
[ 0.671740] [drm] register mmio size: 262144
[ 0.671746] [drm] doorbell mmio base: 0xD0000000
[ 0.671748] [drm] doorbell mmio size: 8388608
[ 0.671809] ATOM BIOS: AMD
[ 0.671880] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 0.671885] radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[ 0.671888] [drm] Detected VRAM RAM=512M, BAR=256M
[ 0.671890] [drm] RAM width 128bits DDR
[ 0.671988] [TTM] Zone kernel: Available graphics memory: 3772324 kiB
[ 0.671990] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 0.671992] [TTM] Initializing pool allocator
[ 0.672000] [TTM] Initializing DMA pool allocator
[ 0.672032] [drm] radeon: 512M of VRAM memory ready
[ 0.672035] [drm] radeon: 1024M of GTT memory ready.
[ 0.672052] [drm] Loading KABINI Microcode
[ 0.672229] [drm] Internal thermal controller without fan control
[ 0.673446] [drm] radeon: dpm initialized
[ 0.675612] [drm] Found VCE firmware/feedback version 40.2.2 / 15!
[ 0.675625] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 0.696224] [drm] PCIE GART of 1024M enabled (table at 0x000000000078B000).
[ 0.696409] radeon 0000:00:01.0: WB enabled
[ 0.696430] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88003748cc00
[ 0.696435] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffff88003748cc04
[ 0.696438] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffff88003748cc08
[ 0.696442] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff88003748cc0c
[ 0.696445] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0xffff88003748cc10
[ 0.697358] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc900114b6c98
[ 0.697436] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000c18 and cpu addr 0xffff88003748cc18
[ 0.697440] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000c1c and cpu addr 0xffff88003748cc1c
[ 0.697443] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.697445] [drm] Driver supports precise vblank timestamp query.
[ 0.697478] radeon 0000:00:01.0: irq 72 for MSI/MSI-X
[ 0.697497] radeon 0000:00:01.0: radeon: using MSI.
[ 0.697532] [drm] radeon: irq initialized.
[ 0.701520] [drm] ring test on 0 succeeded in 3 usecs
[ 0.701607] [drm] ring test on 1 succeeded in 2 usecs
[ 0.701626] [drm] ring test on 2 succeeded in 2 usecs
[ 0.701847] [drm] ring test on 3 succeeded in 2 usecs
[ 0.701857] [drm] ring test on 4 succeeded in 2 usecs
[ 0.757869] [drm] ring test on 5 succeeded in 2 usecs
[ 0.777871] [drm] UVD initialized successfully.
[ 0.887860] [drm] ring test on 6 succeeded in 16 usecs
[ 0.887874] [drm] ring test on 7 succeeded in 4 usecs
[ 0.887876] [drm] VCE initialized successfully.
[ 0.888489] [drm] ib test on ring 0 succeeded in 0 usecs
[ 0.888658] [drm] ib test on ring 1 succeeded in 0 usecs
[ 0.888823] [drm] ib test on ring 2 succeeded in 0 usecs
[ 0.888994] [drm] ib test on ring 3 succeeded in 0 usecs
[ 0.889165] [drm] ib test on ring 4 succeeded in 0 usecs
[ 0.909894] [drm] ib test on ring 5 succeeded
[ 0.930782] [drm] ib test on ring 6 succeeded
[ 0.931484] [drm] ib test on ring 7 succeeded
[ 0.931990] [drm] Radeon Display Connectors
[ 0.931992] [drm] Connector 0:
[ 0.931995] [drm] DVI-D-1
[ 0.931996] [drm] HPD1
[ 0.932000] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 0.932001] [drm] Encoders:
[ 0.932003] [drm] DFP1: INTERNAL_UNIPHY
[ 0.932005] [drm] Connector 1:
[ 0.932006] [drm] HDMI-A-1
[ 0.932008] [drm] HPD2
[ 0.932010] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 0.932012] [drm] Encoders:
[ 0.932013] [drm] DFP2: INTERNAL_UNIPHY
[ 0.932015] [drm] Connector 2:
[ 0.932017] [drm] VGA-1
[ 0.932019] [drm] DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc
[ 0.932021] [drm] Encoders:
[ 0.932022] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 1.001611] [drm] fb mappable at 0xC098F000
[ 1.001617] [drm] vram apper at 0xC0000000
[ 1.001619] [drm] size 9216000
[ 1.001621] [drm] fb depth is 24
[ 1.001623] [drm] pitch is 7680
[ 1.001804] fbcon: radeondrmfb (fb0) is primary device
[ 1.015644] Console: switching to colour frame buffer device 240x75
[ 1.026503] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 1.026506] radeon 0000:00:01.0: registered panic notifier
[ 1.038849] [drm] Initialized radeon 2.38.0 20080528 for 0000:00:01.0 on minor 0
[ 1.055835] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.056244] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.056312] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.064941] ACPI: bus type USB registered
[ 1.064996] usbcore: registered new interface driver usbfs
[ 1.065018] usbcore: registered new interface driver hub
[ 1.065146] SCSI subsystem initialized
[ 1.065204] usbcore: registered new device driver usb
[ 1.066382] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.066612] ehci-pci: EHCI PCI platform driver
[ 1.066788] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.066803] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.066815] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.066825] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.066837] ehci-pci 0000:00:12.2: debug port 1
[ 1.066892] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb6c000
[ 1.067752] libata version 3.00 loaded.
[ 1.067862] ohci-pci: OHCI PCI platform driver
[ 1.074092] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.074426] hub 1-0:1.0: USB hub found
[ 1.074443] hub 1-0:1.0: 4 ports detected
[ 1.074844] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.074856] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.074863] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.074875] ehci-pci 0000:00:13.2: debug port 1
[ 1.074916] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb6a000
[ 1.084102] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.084415] hub 2-0:1.0: USB hub found
[ 1.084434] hub 2-0:1.0: 4 ports detected
[ 1.084860] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.084872] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.084920] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb6d000
[ 1.141863] hub 3-0:1.0: USB hub found
[ 1.141884] hub 3-0:1.0: 4 ports detected
[ 1.142256] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.142266] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 1.142299] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb6b000
[ 1.198481] hub 4-0:1.0: USB hub found
[ 1.198502] hub 4-0:1.0: 4 ports detected
[ 1.198920] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.198931] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
[ 1.199175] xhci_hcd 0000:00:10.0: irq 73 for MSI/MSI-X
[ 1.199183] xhci_hcd 0000:00:10.0: irq 74 for MSI/MSI-X
[ 1.199190] xhci_hcd 0000:00:10.0: irq 75 for MSI/MSI-X
[ 1.199197] xhci_hcd 0000:00:10.0: irq 76 for MSI/MSI-X
[ 1.199203] xhci_hcd 0000:00:10.0: irq 77 for MSI/MSI-X
[ 1.199532] hub 5-0:1.0: USB hub found
[ 1.199548] hub 5-0:1.0: 2 ports detected
[ 1.199699] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.199704] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
[ 1.202754] hub 6-0:1.0: USB hub found
[ 1.202769] hub 6-0:1.0: 2 ports detected
[ 1.202950] ahci 0000:00:11.0: version 3.0
[ 1.203084] ahci 0000:00:11.0: irq 78 for MSI/MSI-X
[ 1.203140] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.203145] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio
[ 1.203704] scsi0 : ahci
[ 1.203914] scsi1 : ahci
[ 1.204035] ata1: SATA max UDMA/133 abar m1024@0xfeb6e000 port 0xfeb6e100 irq 78
[ 1.204040] ata2: SATA max UDMA/133 abar m1024@0xfeb6e000 port 0xfeb6e180 irq 78
[ 1.590390] tsc: Refined TSC clocksource calibration: 2046.162 MHz
[ 1.690314] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.690346] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.691535] ata1.00: ATA-8: WDC WD10JUCT-63J6SY0, 01.01A01, max UDMA/133
[ 1.691539] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.692173] ata2.00: supports DRM functions and may not be fully accessible
[ 1.692237] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.692241] ata2.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0BB6Q, max UDMA/133
[ 1.692244] ata2.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.692416] ata2.00: supports DRM functions and may not be fully accessible
[ 1.692474] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.692479] ata2.00: configured for UDMA/133
[ 1.692763] ata1.00: configured for UDMA/133
[ 1.692974] scsi 0:0:0:0: Direct-Access ATA WDC WD10JUCT-63J 01.0 PQ: 0 ANSI: 5
[ 1.693474] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 840 EXT0 PQ: 0 ANSI: 5
[ 1.697997] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.698004] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.698115] sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.698136] sd 0:0:0:0: [sda] Write Protect is off
[ 1.698141] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.698197] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.698287] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.698292] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.698353] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.703046] sdb: sdb1 sdb2 sdb3
[ 1.703853] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.748041] sda: sda1
[ 1.748649] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.930090] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.054369] hub 2-1:1.0: USB hub found
[ 2.054431] hub 2-1:1.0: 4 ports detected
[ 2.159797] usb 2-2: new high-speed USB device number 3 using ehci-pci
[ 2.180049] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[ 2.412957] usb 3-1: new low-speed USB device number 2 using ohci-pci
[ 2.501371] EXT4-fs (sdb3): re-mounted. Opts: data=ordered
[ 2.538483] systemd-udevd[152]: starting version 215
[ 2.592784] Switched to clocksource tsc
[ 2.604729] ACPI: acpi_idle registered with cpuidle
[ 2.606464] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 2.606474] ACPI: Power Button [PWRB]
[ 2.606559] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 2.606564] ACPI: Power Button [PWRF]
[ 2.613637] acpi-cpufreq: overriding BIOS provided _PSD data
[ 2.613705] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.621328] wmi: Mapper loaded
[ 2.627446] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 2.627520] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 2.628660] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.628678] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.636642] r8169 0000:01:00.0: irq 79 for MSI/MSI-X
[ 2.636694] MCE: In-kernel MCE decoding enabled.
[ 2.636699] [Hardware Error]: System Fatal error.
[ 2.636752] [Hardware Error]: CPU:0 (16:0:1) MC4_STATUS[Over|UE|-|PCC|AddrV|-|-]: 0xf600000000070f0f
[ 2.636830] [Hardware Error]: MC4_ADDR: 0x00000000c098de00
[ 2.636874] [Hardware Error]: MC4 Error (node 0): Watchdog timeout due to lack of progress.
[ 2.636943] [Hardware Error]: cache level: L3/GEN
[ 2.636976] r8169 0000:01:00.0 eth0: RTL8168g/8111g at 0xffffc900135fe000, 44:8a:5b:8b:f0:c6, XID 0c000800 IRQ 7Thanks I tried adding 'iommu=soft' to the grub parameter, and at the very least the IOMMU warning doesn't show up in dmesg anymore.
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.15.7-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Mon Jul 28 20:06:17 CEST 2014
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=4f7f0918-72a6-4e96-8326-d67b9581d5c2 rw quiet iommu=soft
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009d5e5fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d5e6000-0x000000009d615fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009d616000-0x000000009d650fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d651000-0x000000009d70efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009d70f000-0x000000009e3eafff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009e3eb000-0x000000009e42efff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000009e42f000-0x000000009e42ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009e430000-0x000000009e437fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009e438000-0x000000009e871fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009e872000-0x000000009eff2fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009eff3000-0x000000009effffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0x9d6d5000 ACPI 2.0=0x9d6d5000 SMBIOS=0xf04d0 MPS=0xfd4b0
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
[ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000003e000) (0MB)
[ 0.000000] efi: mem02: type=4, attr=0xf, range=[0x000000000003e000-0x0000000000040000) (0MB)
[ 0.000000] efi: mem03: type=3, attr=0xf, range=[0x0000000000040000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000001000000-0x0000000002060000) (16MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000002060000-0x0000000037552000) (852MB)
[ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000037552000-0x0000000037aa1000) (5MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000037aa1000-0x000000006a479000) (809MB)
[ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x000000006a479000-0x000000008ebf1000) (583MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x000000008ebf1000-0x000000008ebf7000) (0MB)
[ 0.000000] efi: mem11: type=1, attr=0xf, range=[0x000000008ebf7000-0x000000008ec14000) (0MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x000000008ec14000-0x0000000091915000) (45MB)
[ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x0000000091915000-0x000000009196b000) (0MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x000000009196b000-0x000000009198f000) (0MB)
[ 0.000000] efi: mem15: type=4, attr=0xf, range=[0x000000009198f000-0x000000009199a000) (0MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x000000009199a000-0x0000000091a1a000) (0MB)
[ 0.000000] efi: mem17: type=4, attr=0xf, range=[0x0000000091a1a000-0x0000000091a1b000) (0MB)
[ 0.000000] efi: mem18: type=7, attr=0xf, range=[0x0000000091a1b000-0x0000000091a40000) (0MB)
[ 0.000000] efi: mem19: type=4, attr=0xf, range=[0x0000000091a40000-0x0000000091a4b000) (0MB)
[ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x0000000091a4b000-0x0000000091a62000) (0MB)
[ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x0000000091a62000-0x0000000091a63000) (0MB)
[ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x0000000091a63000-0x0000000091a8a000) (0MB)
[ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x0000000091a8a000-0x0000000091a8b000) (0MB)
[ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x0000000091a8b000-0x0000000091acd000) (0MB)
[ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x0000000091acd000-0x0000000091acf000) (0MB)
[ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x0000000091acf000-0x0000000091af0000) (0MB)
[ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x0000000091af0000-0x0000000091afb000) (0MB)
[ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x0000000091afb000-0x0000000091b1e000) (0MB)
[ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x0000000091b1e000-0x0000000091b40000) (0MB)
[ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x0000000091b40000-0x0000000091b4d000) (0MB)
[ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x0000000091b4d000-0x0000000091b4e000) (0MB)
[ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x0000000091b4e000-0x0000000091b5d000) (0MB)
[ 0.000000] efi: mem33: type=4, attr=0xf, range=[0x0000000091b5d000-0x0000000091c0c000) (0MB)
[ 0.000000] efi: mem34: type=7, attr=0xf, range=[0x0000000091c0c000-0x0000000091c2c000) (0MB)
[ 0.000000] efi: mem35: type=4, attr=0xf, range=[0x0000000091c2c000-0x0000000091cc4000) (0MB)
[ 0.000000] efi: mem36: type=7, attr=0xf, range=[0x0000000091cc4000-0x0000000091cc5000) (0MB)
[ 0.000000] efi: mem37: type=4, attr=0xf, range=[0x0000000091cc5000-0x0000000091d73000) (0MB)
[ 0.000000] efi: mem38: type=7, attr=0xf, range=[0x0000000091d73000-0x0000000091d8f000) (0MB)
[ 0.000000] efi: mem39: type=4, attr=0xf, range=[0x0000000091d8f000-0x0000000091e21000) (0MB)
[ 0.000000] efi: mem40: type=7, attr=0xf, range=[0x0000000091e21000-0x0000000091e41000) (0MB)
[ 0.000000] efi: mem41: type=4, attr=0xf, range=[0x0000000091e41000-0x0000000092059000) (2MB)
[ 0.000000] efi: mem42: type=7, attr=0xf, range=[0x0000000092059000-0x000000009205c000) (0MB)
[ 0.000000] efi: mem43: type=4, attr=0xf, range=[0x000000009205c000-0x000000009207a000) (0MB)
[ 0.000000] efi: mem44: type=7, attr=0xf, range=[0x000000009207a000-0x000000009207c000) (0MB)
[ 0.000000] efi: mem45: type=4, attr=0xf, range=[0x000000009207c000-0x000000009207e000) (0MB)
[ 0.000000] efi: mem46: type=7, attr=0xf, range=[0x000000009207e000-0x0000000092080000) (0MB)
[ 0.000000] efi: mem47: type=4, attr=0xf, range=[0x0000000092080000-0x0000000092083000) (0MB)
[ 0.000000] efi: mem48: type=7, attr=0xf, range=[0x0000000092083000-0x0000000092084000) (0MB)
[ 0.000000] efi: mem49: type=4, attr=0xf, range=[0x0000000092084000-0x000000009bd9e000) (157MB)
[ 0.000000] efi: mem50: type=7, attr=0xf, range=[0x000000009bd9e000-0x000000009bda1000) (0MB)
[ 0.000000] efi: mem51: type=4, attr=0xf, range=[0x000000009bda1000-0x000000009bda2000) (0MB)
[ 0.000000] efi: mem52: type=7, attr=0xf, range=[0x000000009bda2000-0x000000009bda3000) (0MB)
[ 0.000000] efi: mem53: type=4, attr=0xf, range=[0x000000009bda3000-0x000000009ce78000) (16MB)
[ 0.000000] efi: mem54: type=7, attr=0xf, range=[0x000000009ce78000-0x000000009d31c000) (4MB)
[ 0.000000] efi: mem55: type=3, attr=0xf, range=[0x000000009d31c000-0x000000009d5e6000) (2MB)
[ 0.000000] efi: mem56: type=0, attr=0xf, range=[0x000000009d5e6000-0x000000009d5fe000) (0MB)
[ 0.000000] efi: mem57: type=0, attr=0xf, range=[0x000000009d5fe000-0x000000009d616000) (0MB)
[ 0.000000] efi: mem58: type=7, attr=0xf, range=[0x000000009d616000-0x000000009d645000) (0MB)
[ 0.000000] efi: mem59: type=2, attr=0xf, range=[0x000000009d645000-0x000000009d651000) (0MB)
[ 0.000000] efi: mem60: type=10, attr=0xf, range=[0x000000009d651000-0x000000009d6e7000) (0MB)
[ 0.000000] efi: mem61: type=10, attr=0xf, range=[0x000000009d6e7000-0x000000009d6f2000) (0MB)
[ 0.000000] efi: mem62: type=10, attr=0xf, range=[0x000000009d6f2000-0x000000009d70f000) (0MB)
[ 0.000000] efi: mem63: type=6, attr=0x800000000000000f, range=[0x000000009d70f000-0x000000009e11e000) (10MB)
[ 0.000000] efi: mem64: type=6, attr=0x800000000000000f, range=[0x000000009e11e000-0x000000009e215000) (0MB)
[ 0.000000] efi: mem65: type=6, attr=0x800000000000000f, range=[0x000000009e215000-0x000000009e217000) (0MB)
[ 0.000000] efi: mem66: type=6, attr=0x800000000000000f, range=[0x000000009e217000-0x000000009e330000) (1MB)
[ 0.000000] efi: mem67: type=6, attr=0x800000000000000f, range=[0x000000009e330000-0x000000009e332000) (0MB)
[ 0.000000] efi: mem68: type=6, attr=0x800000000000000f, range=[0x000000009e332000-0x000000009e3eb000) (0MB)
[ 0.000000] efi: mem69: type=5, attr=0x800000000000000f, range=[0x000000009e3eb000-0x000000009e3f8000) (0MB)
[ 0.000000] efi: mem70: type=5, attr=0x800000000000000f, range=[0x000000009e3f8000-0x000000009e42f000) (0MB)
[ 0.000000] efi: mem71: type=4, attr=0xf, range=[0x000000009e42f000-0x000000009e430000) (0MB)
[ 0.000000] efi: mem72: type=10, attr=0xf, range=[0x000000009e430000-0x000000009e438000) (0MB)
[ 0.000000] efi: mem73: type=4, attr=0xf, range=[0x000000009e438000-0x000000009e58e000) (1MB)
[ 0.000000] efi: mem74: type=3, attr=0xf, range=[0x000000009e58e000-0x000000009e83a000) (2MB)
[ 0.000000] efi: mem75: type=4, attr=0xf, range=[0x000000009e83a000-0x000000009e852000) (0MB)
[ 0.000000] efi: mem76: type=3, attr=0xf, range=[0x000000009e852000-0x000000009e864000) (0MB)
[ 0.000000] efi: mem77: type=4, attr=0xf, range=[0x000000009e864000-0x000000009e865000) (0MB)
[ 0.000000] efi: mem78: type=3, attr=0xf, range=[0x000000009e865000-0x000000009e867000) (0MB)
[ 0.000000] efi: mem79: type=4, attr=0xf, range=[0x000000009e867000-0x000000009e872000) (0MB)
[ 0.000000] efi: mem80: type=6, attr=0x800000000000000f, range=[0x000000009e872000-0x000000009eff3000) (7MB)
[ 0.000000] efi: mem81: type=4, attr=0xf, range=[0x000000009eff3000-0x000000009f000000) (0MB)
[ 0.000000] efi: mem82: type=7, attr=0xf, range=[0x0000000100000000-0x000000023f000000) (5104MB)
[ 0.000000] efi: mem83: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem84: type=11, attr=0x8000000000000001, range=[0x00000000fec01000-0x00000000fec02000) (0MB)
[ 0.000000] efi: mem85: type=11, attr=0x8000000000000001, range=[0x00000000fec10000-0x00000000fec11000) (0MB)
[ 0.000000] efi: mem86: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed01000) (0MB)
[ 0.000000] efi: mem87: type=11, attr=0x8000000000000001, range=[0x00000000fed40000-0x00000000fed45000) (0MB)
[ 0.000000] efi: mem88: type=11, attr=0x8000000000000001, range=[0x00000000fed80000-0x00000000fed81000) (0MB)
[ 0.000000] efi: mem89: type=11, attr=0x8000000000000001, range=[0x00000000fed81000-0x00000000fed90000) (0MB)
[ 0.000000] efi: mem90: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: MSI MS-7865/AM1I (MS-7865), BIOS V10.0 02/21/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFE0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000023f000000 aka 9200M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xa0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x9f000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd6f0-0x000fd6ff] mapped at [ffff8800000fd6f0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b3e000, 0x01b3efff] PGTABLE
[ 0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
[ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23ee00000-0x23effffff]
[ 0.000000] [mem 0x23ee00000-0x23effffff] page 2M
[ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23c000000-0x23edfffff]
[ 0.000000] [mem 0x23c000000-0x23edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff]
[ 0.000000] [mem 0x200000000-0x23bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x9d5e5fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x9d3fffff] page 2M
[ 0.000000] [mem 0x9d400000-0x9d5e5fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9d616000-0x9d650fff]
[ 0.000000] [mem 0x9d616000-0x9d650fff] page 4k
[ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x9e42f000-0x9e42ffff]
[ 0.000000] [mem 0x9e42f000-0x9e42ffff] page 4k
[ 0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x9e438000-0x9e871fff]
[ 0.000000] [mem 0x9e438000-0x9e5fffff] page 4k
[ 0.000000] [mem 0x9e600000-0x9e7fffff] page 2M
[ 0.000000] [mem 0x9e800000-0x9e871fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9eff3000-0x9effffff]
[ 0.000000] [mem 0x9eff3000-0x9effffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x37552000-0x37aa0fff]
[ 0.000000] ACPI: RSDP 0x000000009D6D5000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x000000009D6D5078 000074 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000009D6DA208 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20140214/tbfadt-634)
[ 0.000000] ACPI: DSDT 0x000000009D6D5188 00507E (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x000000009D705D80 000040
[ 0.000000] ACPI: APIC 0x000000009D6DA318 00007E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000009D6DA398 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000009D6DA3E0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x000000009D6DA420 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: SSDT 0x000000009D6DA458 000E58 (v01 AMD AGESA 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x000000009D6DB2B0 0046B7 (v02 AMD AGESA 00000002 MSFT 04000000)
[ 0.000000] ACPI: CRAT 0x000000009D6DF968 0003A8 (v01 AMD AGESA 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x000000009D6DFD10 001204 (v01 AMD CPMCMN 00000001 INTL 20051117)
[ 0.000000] ACPI: BGRT 0x000000009D6E0F18 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23effffff]
[ 0.000000] NODE_DATA [mem 0x23eff7000-0x23effbfff]
[ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236e00000-ffff88023e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x23effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009ffff]
[ 0.000000] node 0: [mem 0x00100000-0x9d5e5fff]
[ 0.000000] node 0: [mem 0x9d616000-0x9d650fff]
[ 0.000000] node 0: [mem 0x9e42f000-0x9e42ffff]
[ 0.000000] node 0: [mem 0x9e438000-0x9e871fff]
[ 0.000000] node 0: [mem 0x9eff3000-0x9effffff]
[ 0.000000] node 0: [mem 0x100000000-0x23effffff]
[ 0.000000] On node 0 totalpages: 1952264
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 27 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10026 pages used for memmap
[ 0.000000] DMA32 zone: 641641 pages, LIFO batch:31
[ 0.000000] Normal zone: 20416 pages used for memmap
[ 0.000000] Normal zone: 1306624 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec01000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 6, version 33, address 0xfec01000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 72
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d5e6000-0x9d615fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d651000-0x9d70efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d70f000-0x9e3eafff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e3eb000-0x9e42efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e430000-0x9e437fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e872000-0x9eff2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x9f000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88023ec00000 s87168 r8192 d23424 u524288
[ 0.000000] pcpu-alloc: s87168 r8192 d23424 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1921731
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=4f7f0918-72a6-4e96-8326-d67b9581d5c2 rw quiet iommu=soft
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Memory: 7411432K/7809056K available (5225K kernel code, 886K rwdata, 1644K rodata, 1116K init, 1284K bss, 397624K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:1024 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 31457280 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2046.201 MHz processor
[ 0.000044] Calibrating delay loop (skipped), value calculated using timer frequency.. 4094.91 BogoMIPS (lpj=6820670)
[ 0.000049] pid_max: default: 32768 minimum: 301
[ 0.000061] ACPI: Core revision 20140214
[ 0.011848] ACPI: All ACPI Tables successfully acquired
[ 0.013681] Security Framework initialized
[ 0.013691] Yama: becoming mindful.
[ 0.014550] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.017739] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.019244] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.019266] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.019626] Initializing cgroup subsys memory
[ 0.019635] Initializing cgroup subsys devices
[ 0.019639] Initializing cgroup subsys freezer
[ 0.019642] Initializing cgroup subsys net_cls
[ 0.019645] Initializing cgroup subsys blkio
[ 0.019678] tseg: 009f000000
[ 0.019682] CPU: Physical Processor ID: 0
[ 0.019684] CPU: Processor Core ID: 0
[ 0.019688] mce: CPU supports 6 MCE banks
[ 0.019697] LVT offset 1 assigned for vector 0xf9
[ 0.019705] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
tlb_flushall_shift: 6
[ 0.019841] Freeing SMP alternatives memory: 20K (ffffffff819f6000 - ffffffff819fb000)
[ 0.029272] ftrace: allocating 20230 entries in 80 pages
[ 0.041210] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.074193] smpboot: CPU0: AMD Athlon(tm) 5350 APU with Radeon(tm) R3 (fam: 16, model: 00, stepping: 01)
[ 0.180173] Performance Events: AMD PMU driver.
[ 0.180180] ... version: 0
[ 0.180182] ... bit width: 48
[ 0.180184] ... generic registers: 4
[ 0.180186] ... value mask: 0000ffffffffffff
[ 0.180188] ... max period: 00007fffffffffff
[ 0.180190] ... fixed-purpose events: 0
[ 0.180191] ... event mask: 000000000000000f
[ 0.200416] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.207129] x86: Booting SMP configuration:
[ 0.207136] .... node #0, CPUs: #1 #2 #3
[ 0.260315] x86: Booted up 1 node, 4 CPUs
[ 0.260323] smpboot: Total of 4 processors activated (16376.67 BogoMIPS)
[ 0.261370] devtmpfs: initialized
[ 0.268212] PM: Registering ACPI NVS region [mem 0x9d651000-0x9d70efff] (778240 bytes)
[ 0.268234] PM: Registering ACPI NVS region [mem 0x9e430000-0x9e437fff] (32768 bytes)
[ 0.269808] pinctrl core: initialized pinctrl subsystem
[ 0.269843] RTC time: 13:47:40, date: 07/31/14
[ 0.269910] NET: Registered protocol family 16
[ 0.270072] cpuidle: using governor ladder
[ 0.270075] cpuidle: using governor menu
[ 0.270152] ACPI: bus type PCI registered
[ 0.270155] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.270246] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.270251] PCI: not using MMCONFIG
[ 0.270253] PCI: Using configuration type 1 for base access
[ 0.270255] PCI: Using configuration type 1 for extended access
[ 0.271913] ACPI: Added _OSI(Module Device)
[ 0.271916] ACPI: Added _OSI(Processor Device)
[ 0.271918] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.271921] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.274776] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.281005] ACPI: Interpreter enabled
[ 0.281016] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580)
[ 0.281023] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
[ 0.281046] ACPI: (supports S0 S3 S4 S5)
[ 0.281048] ACPI: Using IOAPIC for interrupt routing
[ 0.281081] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.281146] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.281826] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.409789] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.409802] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.410059] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[ 0.410197] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.410202] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[ 0.410206] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[ 0.410210] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.410783] PCI host bridge to bus 0000:00
[ 0.410788] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.410792] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.410796] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.410799] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.410802] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.410805] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.410809] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.410812] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
[ 0.410824] pci 0000:00:00.0: [1022:1536] type 00 class 0x060000
[ 0.410960] pci 0000:00:01.0: [1002:9830] type 00 class 0x030000
[ 0.410978] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.410991] pci 0000:00:01.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref]
[ 0.411000] pci 0000:00:01.0: reg 0x20: [io 0xf000-0xf0ff]
[ 0.411009] pci 0000:00:01.0: reg 0x24: [mem 0xfeb00000-0xfeb3ffff]
[ 0.411018] pci 0000:00:01.0: reg 0x30: [mem 0xfeb40000-0xfeb5ffff pref]
[ 0.411063] pci 0000:00:01.0: supports D1 D2
[ 0.411066] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[ 0.411174] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
[ 0.411189] pci 0000:00:01.1: reg 0x10: [mem 0xfeb64000-0xfeb67fff 64bit]
[ 0.411258] pci 0000:00:01.1: supports D1 D2
[ 0.411352] pci 0000:00:02.0: [1022:1538] type 00 class 0x060000
[ 0.411469] pci 0000:00:02.4: [1022:1439] type 01 class 0x060400
[ 0.411549] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
[ 0.411605] pci 0000:00:02.4: System wakeup disabled by ACPI
[ 0.411695] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[ 0.411715] pci 0000:00:10.0: reg 0x10: [mem 0xfeb68000-0xfeb69fff 64bit]
[ 0.411814] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.411871] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 0.411943] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.411964] pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147]
[ 0.411974] pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133]
[ 0.411984] pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127]
[ 0.411993] pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113]
[ 0.412003] pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f]
[ 0.412013] pci 0000:00:11.0: reg 0x24: [mem 0xfeb6e000-0xfeb6e3ff]
[ 0.412062] pci 0000:00:11.0: PME# supported from D3hot
[ 0.412168] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.412182] pci 0000:00:12.0: reg 0x10: [mem 0xfeb6d000-0xfeb6dfff]
[ 0.412272] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.412338] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.412356] pci 0000:00:12.2: reg 0x10: [mem 0xfeb6c000-0xfeb6c0ff]
[ 0.412429] pci 0000:00:12.2: supports D1 D2
[ 0.412432] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.412481] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.412545] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.412559] pci 0000:00:13.0: reg 0x10: [mem 0xfeb6b000-0xfeb6bfff]
[ 0.412649] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.412713] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.412732] pci 0000:00:13.2: reg 0x10: [mem 0xfeb6a000-0xfeb6a0ff]
[ 0.412804] pci 0000:00:13.2: supports D1 D2
[ 0.412807] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.412856] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.412920] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.413059] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.413080] pci 0000:00:14.2: reg 0x10: [mem 0xfeb60000-0xfeb63fff 64bit]
[ 0.413138] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.413186] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.413246] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.413396] pci 0000:00:18.0: [1022:1530] type 00 class 0x060000
[ 0.413504] pci 0000:00:18.1: [1022:1531] type 00 class 0x060000
[ 0.413599] pci 0000:00:18.2: [1022:1532] type 00 class 0x060000
[ 0.413694] pci 0000:00:18.3: [1022:1533] type 00 class 0x060000
[ 0.413795] pci 0000:00:18.4: [1022:1534] type 00 class 0x060000
[ 0.413889] pci 0000:00:18.5: [1022:1535] type 00 class 0x060000
[ 0.414084] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.414112] pci 0000:01:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.414145] pci 0000:01:00.0: reg 0x18: [mem 0xfea00000-0xfea00fff 64bit]
[ 0.414168] pci 0000:01:00.0: reg 0x20: [mem 0xd0800000-0xd0803fff 64bit pref]
[ 0.414270] pci 0000:01:00.0: supports D1 D2
[ 0.414273] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.420298] pci 0000:00:02.4: PCI bridge to [bus 01]
[ 0.420311] pci 0000:00:02.4: bridge window [io 0xe000-0xefff]
[ 0.420317] pci 0000:00:02.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.420325] pci 0000:00:02.4: bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
[ 0.420660] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 *11 14 15)
[ 0.420765] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 *5 7 10 11 14 15)
[ 0.420871] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 *11 14 15)
[ 0.420975] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 *10 11 14 15)
[ 0.421061] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 *11 14 15)
[ 0.421142] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 *10 11 14 15)
[ 0.421213] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.421284] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 *5 7 10 11 14 15)
[ 0.421664] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.421671] vgaarb: loaded
[ 0.421673] vgaarb: bridge control possible 0000:00:01.0
[ 0.421788] PCI: Using ACPI for IRQ routing
[ 0.428911] PCI: pci_cache_line_size set to 64 bytes
[ 0.428965] e820: reserve RAM buffer [mem 0x9d5e6000-0x9fffffff]
[ 0.428969] e820: reserve RAM buffer [mem 0x9d651000-0x9fffffff]
[ 0.428972] e820: reserve RAM buffer [mem 0x9e430000-0x9fffffff]
[ 0.428975] e820: reserve RAM buffer [mem 0x9e872000-0x9fffffff]
[ 0.428977] e820: reserve RAM buffer [mem 0x9f000000-0x9fffffff]
[ 0.428979] e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
[ 0.429134] NetLabel: Initializing
[ 0.429136] NetLabel: domain hash size = 128
[ 0.429138] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.429157] NetLabel: unlabeled traffic allowed by default
[ 0.429187] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.429192] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.431262] Switched to clocksource hpet
[ 0.438771] pnp: PnP ACPI init
[ 0.438801] ACPI: bus type PNP registered
[ 0.439000] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.439007] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.439140] system 00:01: [mem 0xa0000000-0xbfffffff] has been reserved
[ 0.439145] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.439353] system 00:02: [io 0x0a00-0x0a0f] has been reserved
[ 0.439357] system 00:02: [io 0x0a10-0x0a1f] has been reserved
[ 0.439361] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.439615] pnp 00:03: [dma 0 disabled]
[ 0.439694] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.439762] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.439780] pnp 00:05: [dma 4]
[ 0.439814] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.439870] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.439913] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.440008] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.440013] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.440066] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.440493] system 00:0a: [io 0x04d0-0x04d1] has been reserved
[ 0.440497] system 00:0a: [io 0x040b] has been reserved
[ 0.440500] system 00:0a: [io 0x04d6] has been reserved
[ 0.440504] system 00:0a: [io 0x0c00-0x0c01] has been reserved
[ 0.440507] system 00:0a: [io 0x0c14] has been reserved
[ 0.440511] system 00:0a: [io 0x0c50-0x0c51] has been reserved
[ 0.440514] system 00:0a: [io 0x0c52] has been reserved
[ 0.440517] system 00:0a: [io 0x0c6c] has been reserved
[ 0.440521] system 00:0a: [io 0x0c6f] has been reserved
[ 0.440524] system 00:0a: [io 0x0cd0-0x0cd1] has been reserved
[ 0.440527] system 00:0a: [io 0x0cd2-0x0cd3] has been reserved
[ 0.440531] system 00:0a: [io 0x0cd4-0x0cd5] has been reserved
[ 0.440534] system 00:0a: [io 0x0cd6-0x0cd7] has been reserved
[ 0.440538] system 00:0a: [io 0x0cd8-0x0cdf] has been reserved
[ 0.440541] system 00:0a: [io 0x0800-0x089f] could not be reserved
[ 0.440545] system 00:0a: [io 0x0b20-0x0b3f] has been reserved
[ 0.440548] system 00:0a: [io 0x0900-0x090f] has been reserved
[ 0.440552] system 00:0a: [io 0x0910-0x091f] has been reserved
[ 0.440555] system 00:0a: [io 0xfe00-0xfefe] has been reserved
[ 0.440560] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.440564] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.440568] system 00:0a: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.440572] system 00:0a: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.440576] system 00:0a: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.440579] system 00:0a: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.440583] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[ 0.440588] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.440940] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.440948] pnp: PnP ACPI: found 12 devices
[ 0.440950] ACPI: bus type PNP unregistered
[ 0.449216] pci 0000:00:02.4: PCI bridge to [bus 01]
[ 0.449222] pci 0000:00:02.4: bridge window [io 0xe000-0xefff]
[ 0.449228] pci 0000:00:02.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.449234] pci 0000:00:02.4: bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
[ 0.449242] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.449245] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.449248] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.449252] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.449255] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.449258] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.449261] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.449265] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.449268] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.449272] pci_bus 0000:01: resource 2 [mem 0xd0800000-0xd08fffff 64bit pref]
[ 0.449306] NET: Registered protocol family 2
[ 0.449586] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.449862] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.450156] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.450208] TCP: reno registered
[ 0.450226] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.450287] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.450425] NET: Registered protocol family 1
[ 0.450450] pci 0000:00:01.0: Boot video device
[ 0.451231] PCI: CLS 64 bytes, default 64
[ 0.451351] Unpacking initramfs...
[ 0.592512] Freeing initrd memory: 5436K (ffff880037552000 - ffff880037aa1000)
[ 0.592523] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.592527] software IO TLB [mem 0x8d915000-0x91915000] (64MB) mapped at [ffff88008d915000-ffff880091914fff]
[ 0.592831] perf: AMD NB counters detected
[ 0.592835] perf: AMD L2I counters detected
[ 0.592862] LVT offset 0 assigned for vector 0x400
[ 0.592882] perf: AMD IBS detected (0x000000ff)
[ 0.592932] Scanning for low memory corruption every 60 seconds
[ 0.593381] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.612146] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.614545] zbud: loaded
[ 0.614805] VFS: Disk quotas dquot_6.5.2
[ 0.614864] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.615057] msgmni has been set to 14858
[ 0.615135] Key type big_key registered
[ 0.615381] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.615443] io scheduler noop registered
[ 0.615446] io scheduler deadline registered
[ 0.615494] io scheduler cfq registered (default)
[ 0.615791] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.615816] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.615869] efifb: probing for efifb
[ 0.615894] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 1984k, total 1984k
[ 0.615896] efifb: mode is 800x600x32, linelength=3328, pages=1
[ 0.615898] efifb: scrolling: redraw
[ 0.615901] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.618308] Console: switching to colour frame buffer device 100x37
[ 0.620547] fb0: EFI VGA frame buffer device
[ 0.620590] GHES: HEST is not enabled!
[ 0.620687] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.641207] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.641815] Linux agpgart interface v0.103
[ 0.641878] rtc_cmos 00:06: RTC can wake from S4
[ 0.642014] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.642044] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.642059] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.642200] TCP: cubic registered
[ 0.642361] NET: Registered protocol family 10
[ 0.642733] NET: Registered protocol family 17
[ 0.643211] registered taskstats version 1
[ 0.643636] Magic number: 6:949:787
[ 0.643741] rtc_cmos 00:06: setting system clock to 2014-07-31 13:47:40 UTC (1406814460)
[ 0.643835] PM: Hibernation image not present or could not be loaded.
[ 0.645595] Freeing unused kernel memory: 1116K (ffffffff818df000 - ffffffff819f6000)
[ 0.645598] Write protecting the kernel read-only data: 8192k
[ 0.649786] Freeing unused kernel memory: 908K (ffff88000151d000 - ffff880001600000)
[ 0.651564] Freeing unused kernel memory: 404K (ffff88000179b000 - ffff880001800000)
[ 0.660598] random: systemd-tmpfile urandom read with 2 bits of entropy available
[ 0.662488] systemd-udevd[58]: starting version 215
[ 0.666342] [drm] Initialized drm 1.1.0 20060810
[ 0.674540] [drm] radeon kernel modesetting enabled.
[ 0.674597] checking generic (c0000000 1f0000) vs hw (c0000000 10000000)
[ 0.674600] fb: switching to radeondrmfb from EFI VGA
[ 0.674633] Console: switching to colour dummy device 80x25
[ 0.675169] [drm] initializing kernel modesetting (KABINI 0x1002:0x9830 0x1462:0x7865).
[ 0.675185] [drm] register mmio base: 0xFEB00000
[ 0.675187] [drm] register mmio size: 262144
[ 0.675194] [drm] doorbell mmio base: 0xD0000000
[ 0.675196] [drm] doorbell mmio size: 8388608
[ 0.675262] ATOM BIOS: AMD
[ 0.675332] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 0.675337] radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[ 0.675340] [drm] Detected VRAM RAM=512M, BAR=256M
[ 0.675342] [drm] RAM width 128bits DDR
[ 0.675443] [TTM] Zone kernel: Available graphics memory: 3805092 kiB
[ 0.675446] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 0.675448] [TTM] Initializing pool allocator
[ 0.675455] [TTM] Initializing DMA pool allocator
[ 0.675489] [drm] radeon: 512M of VRAM memory ready
[ 0.675491] [drm] radeon: 1024M of GTT memory ready.
[ 0.675507] [drm] Loading KABINI Microcode
[ 0.675686] [drm] Internal thermal controller without fan control
[ 0.676814] [drm] radeon: dpm initialized
[ 0.678982] [drm] Found VCE firmware/feedback version 40.2.2 / 15!
[ 0.678994] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 0.692799] [drm] PCIE GART of 1024M enabled (table at 0x000000000078B000).
[ 0.692982] radeon 0000:00:01.0: WB enabled
[ 0.693007] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff88003747cc00
[ 0.693011] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffff88003747cc04
[ 0.693015] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffff88003747cc08
[ 0.693019] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff88003747cc0c
[ 0.693022] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0xffff88003747cc10
[ 0.693935] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc900114b6c98
[ 0.694014] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000c18 and cpu addr 0xffff88003747cc18
[ 0.694017] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000c1c and cpu addr 0xffff88003747cc1c
[ 0.694021] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.694023] [drm] Driver supports precise vblank timestamp query.
[ 0.694056] radeon 0000:00:01.0: irq 72 for MSI/MSI-X
[ 0.694075] radeon 0000:00:01.0: radeon: using MSI.
[ 0.694110] [drm] radeon: irq initialized.
[ 0.698095] [drm] ring test on 0 succeeded in 2 usecs
[ 0.698183] [drm] ring test on 1 succeeded in 2 usecs
[ 0.698202] [drm] ring test on 2 succeeded in 2 usecs
[ 0.698423] [drm] ring test on 3 succeeded in 2 usecs
[ 0.698433] [drm] ring test on 4 succeeded in 2 usecs
[ 0.754446] [drm] ring test on 5 succeeded in 2 usecs
[ 0.774448] [drm] UVD initialized successfully.
[ 0.884437] [drm] ring test on 6 succeeded in 16 usecs
[ 0.884451] [drm] ring test on 7 succeeded in 4 usecs
[ 0.884453] [drm] VCE initialized successfully.
[ 0.885068] [drm] ib test on ring 0 succeeded in 0 usecs
[ 0.885234] [drm] ib test on ring 1 succeeded in 0 usecs
[ 0.885398] [drm] ib test on ring 2 succeeded in 0 usecs
[ 0.885568] [drm] ib test on ring 3 succeeded in 0 usecs
[ 0.885736] [drm] ib test on ring 4 succeeded in 0 usecs
[ 0.906461] [drm] ib test on ring 5 succeeded
[ 0.927296] [drm] ib test on ring 6 succeeded
[ 0.927990] [drm] ib test on ring 7 succeeded
[ 0.928503] [drm] Radeon Display Connectors
[ 0.928506] [drm] Connector 0:
[ 0.928508] [drm] DVI-D-1
[ 0.928510] [drm] HPD1
[ 0.928513] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[ 0.928515] [drm] Encoders:
[ 0.928517] [drm] DFP1: INTERNAL_UNIPHY
[ 0.928518] [drm] Connector 1:
[ 0.928520] [drm] HDMI-A-1
[ 0.928522] [drm] HPD2
[ 0.928524] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 0.928526] [drm] Encoders:
[ 0.928527] [drm] DFP2: INTERNAL_UNIPHY
[ 0.928529] [drm] Connector 2:
[ 0.928530] [drm] VGA-1
[ 0.928533] [drm] DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc
[ 0.928534] [drm] Encoders:
[ 0.928536] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 1.001584] [drm] fb mappable at 0xC098F000
[ 1.001591] [drm] vram apper at 0xC0000000
[ 1.001592] [drm] size 9216000
[ 1.001595] [drm] fb depth is 24
[ 1.001597] [drm] pitch is 7680
[ 1.001789] fbcon: radeondrmfb (fb0) is primary device
[ 1.015610] Console: switching to colour frame buffer device 240x75
[ 1.026466] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[ 1.026469] radeon 0000:00:01.0: registered panic notifier
[ 1.037218] [drm] Initialized radeon 2.38.0 20080528 for 0000:00:01.0 on minor 0
[ 1.054350] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.055311] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.055349] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.063297] ACPI: bus type USB registered
[ 1.063350] usbcore: registered new interface driver usbfs
[ 1.063372] usbcore: registered new interface driver hub
[ 1.063423] SCSI subsystem initialized
[ 1.066957] usbcore: registered new device driver usb
[ 1.067000] libata version 3.00 loaded.
[ 1.067842] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.068090] ehci-pci: EHCI PCI platform driver
[ 1.068283] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.068295] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.068304] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.068316] ehci-pci 0000:00:12.2: debug port 1
[ 1.068370] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb6c000
[ 1.069997] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.070168] ohci-pci: OHCI PCI platform driver
[ 1.077405] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.077741] hub 1-0:1.0: USB hub found
[ 1.077757] hub 1-0:1.0: 4 ports detected
[ 1.078166] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.078178] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.078184] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.078196] ehci-pci 0000:00:13.2: debug port 1
[ 1.078238] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb6a000
[ 1.087533] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.087880] hub 2-0:1.0: USB hub found
[ 1.087895] hub 2-0:1.0: 4 ports detected
[ 1.088132] ahci 0000:00:11.0: version 3.0
[ 1.088338] ahci 0000:00:11.0: irq 73 for MSI/MSI-X
[ 1.088396] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.088401] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio
[ 1.089018] scsi0 : ahci
[ 1.089218] scsi1 : ahci
[ 1.089314] ata1: SATA max UDMA/133 abar m1024@0xfeb6e000 port 0xfeb6e100 irq 73
[ 1.089318] ata2: SATA max UDMA/133 abar m1024@0xfeb6e000 port 0xfeb6e180 irq 73
[ 1.089464] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.089475] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[ 1.089702] xhci_hcd 0000:00:10.0: irq 74 for MSI/MSI-X
[ 1.089709] xhci_hcd 0000:00:10.0: irq 75 for MSI/MSI-X
[ 1.089716] xhci_hcd 0000:00:10.0: irq 76 for MSI/MSI-X
[ 1.089722] xhci_hcd 0000:00:10.0: irq 77 for MSI/MSI-X
[ 1.089729] xhci_hcd 0000:00:10.0: irq 78 for MSI/MSI-X
[ 1.090109] hub 3-0:1.0: USB hub found
[ 1.090137] hub 3-0:1.0: 2 ports detected
[ 1.090301] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.090307] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
[ 1.093294] hub 4-0:1.0: USB hub found
[ 1.093310] hub 4-0:1.0: 2 ports detected
[ 1.093552] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.093562] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 5
[ 1.093605] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb6d000
[ 1.148390] hub 5-0:1.0: USB hub found
[ 1.148409] hub 5-0:1.0: 4 ports detected
[ 1.148768] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.148778] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 6
[ 1.148812] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb6b000
[ 1.205168] hub 6-0:1.0: USB hub found
[ 1.205187] hub 6-0:1.0: 4 ports detected
[ 1.573742] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.573775] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.574951] ata1.00: ATA-8: WDC WD10JUCT-63J6SY0, 01.01A01, max UDMA/133
[ 1.574955] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.575585] ata2.00: supports DRM functions and may not be fully accessible
[ 1.575651] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.575655] ata2.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0BB6Q, max UDMA/133
[ 1.575658] ata2.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.575828] ata2.00: supports DRM functions and may not be fully accessible
[ 1.575906] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.575911] ata2.00: configured for UDMA/133
[ 1.576181] ata1.00: configured for UDMA/133
[ 1.576405] scsi 0:0:0:0: Direct-Access ATA WDC WD10JUCT-63J 01.0 PQ: 0 ANSI: 5
[ 1.576855] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 840 EXT0 PQ: 0 ANSI: 5
[ 1.581444] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.581450] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.581474] sd 1:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.581582] sd 0:0:0:0: [sda] Write Protect is off
[ 1.581587] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.581638] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.581643] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.581648] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.581700] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.584861] sdb: sdb1 sdb2 sdb3
[ 1.585501] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.593638] tsc: Refined TSC clocksource calibration: 2046.162 MHz
[ 1.631488] sda: sda1
[ 1.632088] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.849886] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[ 1.933435] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.057577] hub 2-1:1.0: USB hub found
[ 2.057627] hub 2-1:1.0: 4 ports detected
[ 2.146903] EXT4-fs (sdb3): re-mounted. Opts: data=ordered
[ 2.163090] usb 2-2: new high-speed USB device number 3 using ehci-pci
[ 2.175497] systemd-udevd[151]: starting version 215
[ 2.232625] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 2.232635] ACPI: Power Button [PWRB]
[ 2.232767] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 2.232771] ACPI: Power Button [PWRF]
[ 2.234403] ACPI: acpi_idle registered with cpuidle
[ 2.234963] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.238941] acpi-cpufreq: overriding BIOS provided _PSD data
[ 2.248161] wmi: Mapper loaded
[ 2.256907] MCE: In-kernel MCE decoding enabled.
[ 2.257298] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 2.257361] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 2.259327] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.259345] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.260554] EDAC MC: Ver: 3.0.0
[ 2.264519] snd_hda_intel 0000:00:01.1: irq 79 for MSI/MSI-X
[ 2.266714] r8169 0000:01:00.0: irq 80 for MSI/MSI-X
[ 2.267097] r8169 0000:01:00.0 eth0: RTL8168g/8111g at 0xffffc90013640000, 44:8a:5b:8b:f0:c6, XID 0c000800 IRQ 80
[ 2.267101] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 2.267241] AMD64 EDAC driver v3.4.0
[ 2.267288] EDAC amd64: DRAM ECC disabled.
[ 2.267304] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 2.268201] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 2.271452] microcode: CPU0: patch_level=0x0700010b
[ 2.275863] microcode: CPU1: patch_level=0x0700010b
[ 2.275879] microcode: CPU2: patch_level=0x0700010b
[ 2.275891] microcode: CPU3: patch_level=0x0700010b
[ 2.283311] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card1/input6
[ 2.283381] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card1/input7
[ 2.283509] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 2.298087] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 2.298096] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.298100] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 2.298103] sound hdaudioC0D0: mono: mono_out=0x0
[ 2.298106] sound hdaudioC0D0: inputs:
[ 2.298111] sound hdaudioC0D0: Front Mic=0x19
[ 2.298114] sound hdaudioC0D0: Rear Mic=0x18
[ 2.298117] sound hdaudioC0D0: Line=0x1a
[ 2.316533] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 2.317532] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 2.317705] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 2.318150] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 2.318273] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 2.318983] AVX version of gcm_enc/dec engaged.
[ 2.319807] systemd-udevd[167]: renamed network interface eth0 to enp1s0
[ 2.332647] Adding 4194300k swap on /dev/sdb2. Priority:-1 extents:1 across:4194300k SSFS
[ 2.377567] cfg80211: Calling CRDA to update world regulatory domain
[ 2.377691] kvm: Nested Virtualization enabled
[ 2.377697] kvm: Nested Paging enabled
[ 2.409760] random: nonblocking pool is initialized
[ 2.416320] usb 5-1: new low-speed USB device number 2 using ohci-pci
[ 2.423529] rtl8192cu: Chip version 0x11
[ 2.502319] rtl8192cu: MAC address: c0:4a:00:28:cf:49
[ 2.502335] rtl8192cu: Board Type 0
[ 2.502562] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[ 2.502687] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[ 2.502995] usbcore: registered new interface driver rtl8192cu
[ 2.511541] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 2.514964] rtlwifi: wireless switch is on
[ 2.526734] systemd-udevd[153]: renamed network interface wlan0 to wlp0s19f2u2
[ 2.582246] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered
[ 2.583711] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.591041] usbcore: registered new interface driver usbhid
[ 2.591047] usbhid: USB HID core driver
[ 2.592765] Switched to clocksource tsc
[ 2.596303] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.0/0003:046D:C05A.0001/input/input13
[ 2.596486] hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-1/input0
[ 2.600457] mousedev: PS/2 mouse device common for all mice
[ 2.606394] systemd-journald[136]: Received request to flush runtime journal from PID 1
[ 2.637079] f71882fg: Found f71808a chip at 0xa00, revision 33
[ 2.637396] f71882fg f71882fg.2560: Fan: 1 is in duty-cycle mode
[ 2.637433] f71882fg f71882fg.2560: Fan: 2 is in duty-cycle mode
[ 2.637441] f71882fg f71882fg.2560: Auto pwm controlled by raw digital data, disabling pwm auto_point sysfs attributes for fan 2
[ 2.822580] usb 5-4: new full-speed USB device number 3 using ohci-pci
[ 3.016578] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:12.0/usb5/5-4/5-4:1.0/input/input14
[ 3.016734] usbcore: registered new interface driver xpad
[ 3.085774] usb 2-1.4: new low-speed USB device number 4 using ehci-pci
[ 3.151074] r8169 0000:01:00.0 enp1s0: link down
[ 3.151168] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[ 3.161987] rtl8192cu: MAC auto ON okay!
[ 3.194709] rtl8192cu: Tx queue select: 0x05
[ 3.243888] input: Cypress Cypress USB Keyboard / PS2 Mouse as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1.4/2-1.4:1.0/0003:04B4:0101.0002/input/input15
[ 3.244062] hid-generic 0003:04B4:0101.0002: input,hidraw1: USB HID v1.00 Keyboard [Cypress Cypress USB Keyboard / PS2 Mouse] on usb-0000:00:13.2-1.4/input0
[ 3.277164] input: Cypress Cypress USB Keyboard / PS2 Mouse as /devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1.4/2-1.4:1.1/0003:04B4:0101.0003/input/input16
[ 3.277435] hid-generic 0003:04B4:0101.0003: input,hidraw2: USB HID v1.00 Mouse [Cypress Cypress USB Keyboard / PS2 Mouse] on usb-0000:00:13.2-1.4/input1
[ 3.581994] IPv6: ADDRCONF(NETDEV_UP): wlp0s19f2u2: link is not ready
[ 4.520505] wlp0s19f2u2: authenticate with 20:aa:4b:55:50:55
[ 4.532485] wlp0s19f2u2: send auth to 20:aa:4b:55:50:55 (try 1/3)
[ 4.562603] wlp0s19f2u2: authenticated
[ 4.562883] rtl8192cu 2-2:1.0 wlp0s19f2u2: disabling HT as WMM/QoS is not supported by the AP
[ 4.562887] rtl8192cu 2-2:1.0 wlp0s19f2u2: disabling VHT as WMM/QoS is not supported by the AP
[ 4.564297] wlp0s19f2u2: associate with 20:aa:4b:55:50:55 (try 1/3)
[ 4.569350] wlp0s19f2u2: RX AssocResp from 20:aa:4b:55:50:55 (capab=0x411 status=0 aid=3)
[ 4.569419] wlp0s19f2u2: associated
[ 4.569491] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s19f2u2: link becomes ready
[ 11.081330] fuse init (API version 7.23)
I'll test things out for now, and if the problem doesn't happen with a full week use then it is solved.
Thanks a lot.
Maybe you are looking for
-
i have currently been using my iPod touch 4th generation to talk to friends on group chats. Lately my messages that have been sent to me are coming through days after they were originally sent. My iPod is currently updated to 6.1.6 and there are curr
-
API to insert into AP_INVOICE_DISTRIBUTIONS_ALL table
Hi all, I am developing an AP chargeback creation program with AP Invoices in 11i. User wants the chargeback line to be added to the Invoice distribution lines i.e if An invoice has an initial distribtution of 100 equal to its total invoice
-
The lease timeout between avaiability group and the Windows Server Failover Cluster has expired
Hi, I am having some issues where I get a lease timeout from time to time. I have a Windows 2012 Failover Cluster with 2 nodes and 2 SQL 2012 Always-on Availability Groups. Both nodes are a physical machines and each node is the primary for an AG.
-
How to change communication language
Bonjour, I changed by mistake my communication language to Arabic, I think or something like that... Anyway, I don't understand, I can remember how to change it... Where do I go to change it?? Please... Sarah
-
Unable to download paid version of premiere elements 13
im trying to download elements 13 onto my laptop that has windows 8 and when I run the program it says that both programs aren't saved to the same file. it then gives me the option to open another program on my computer or download an app onto my com